From: Rob Herring <robh@kernel.org> To: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, Nicolas Saenz Julienne <nsaenz@kernel.org>, Lee Jones <lee.jones@linaro.org>, Peter Robinson <pbrobinson@gmail.com>, Melissa Wen <melissa.srw@gmail.com>, Phil Elwell <phil@raspberrypi.com>, bcm-kernel-feedback-list@broadcom.com, Maxime Ripard <maxime@cerno.tech>, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH V2 03/11] dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711 Date: Sun, 5 Jun 2022 17:30:58 -0500 [thread overview] Message-ID: <20220605223058.GA3644760-robh@kernel.org> (raw) In-Reply-To: <20220601125344.60602-4-stefan.wahren@i2se.com> On Wed, Jun 01, 2022 at 02:53:36PM +0200, Stefan Wahren wrote: > Add a new compatible string for BCM2711 and the option to provide a > third reg property for the board's new RPiVid ASB. > > In BCM2711 the new RPiVid ASB took over V3D, which is our only consumer > of this driver so far. The old ASB is still be present with ISP and H264 > bits but no V3D. > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > --- > .../devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml | 10 +++++++--- > 1 file changed, 7 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml > index 883ab7cb96e9..f448f034a33a 100644 > --- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml > +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml > @@ -19,17 +19,21 @@ allOf: > properties: > compatible: > items: > - - const: brcm,bcm2835-pm > + - enum: > + - brcm,bcm2835-pm > + - brcm,bcm2711-pm > - const: brcm,bcm2835-pm-wdt > > reg: > - minItems: 2 > - maxItems: 2 > + minItems: 1 2? > + maxItems: 3 > > reg-names: > + minItems: 2 > items: > - const: pm > - const: asb > + - const: rpivid_asb > > "#power-domain-cells": > const: 1 > -- > 2.25.1 > >
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org> To: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, Nicolas Saenz Julienne <nsaenz@kernel.org>, Lee Jones <lee.jones@linaro.org>, Peter Robinson <pbrobinson@gmail.com>, Melissa Wen <melissa.srw@gmail.com>, Phil Elwell <phil@raspberrypi.com>, bcm-kernel-feedback-list@broadcom.com, Maxime Ripard <maxime@cerno.tech>, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH V2 03/11] dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711 Date: Sun, 5 Jun 2022 17:30:58 -0500 [thread overview] Message-ID: <20220605223058.GA3644760-robh@kernel.org> (raw) In-Reply-To: <20220601125344.60602-4-stefan.wahren@i2se.com> On Wed, Jun 01, 2022 at 02:53:36PM +0200, Stefan Wahren wrote: > Add a new compatible string for BCM2711 and the option to provide a > third reg property for the board's new RPiVid ASB. > > In BCM2711 the new RPiVid ASB took over V3D, which is our only consumer > of this driver so far. The old ASB is still be present with ISP and H264 > bits but no V3D. > > Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > --- > .../devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml | 10 +++++++--- > 1 file changed, 7 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml > index 883ab7cb96e9..f448f034a33a 100644 > --- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml > +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml > @@ -19,17 +19,21 @@ allOf: > properties: > compatible: > items: > - - const: brcm,bcm2835-pm > + - enum: > + - brcm,bcm2835-pm > + - brcm,bcm2711-pm > - const: brcm,bcm2835-pm-wdt > > reg: > - minItems: 2 > - maxItems: 2 > + minItems: 1 2? > + maxItems: 3 > > reg-names: > + minItems: 2 > items: > - const: pm > - const: asb > + - const: rpivid_asb > > "#power-domain-cells": > const: 1 > -- > 2.25.1 > > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-06-05 22:31 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-06-01 12:53 [PATCH V2 00/11] soc: bcm2835-power: Prepare BCM2711 V3D support Stefan Wahren 2022-06-01 12:53 ` Stefan Wahren 2022-06-01 12:53 ` [PATCH V2 01/11] dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema Stefan Wahren 2022-06-01 12:53 ` Stefan Wahren 2022-06-01 12:53 ` [PATCH V2 02/11] dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names Stefan Wahren 2022-06-01 12:53 ` Stefan Wahren 2022-06-01 13:13 ` Peter Robinson 2022-06-01 13:13 ` Peter Robinson 2022-06-01 12:53 ` [PATCH V2 03/11] dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711 Stefan Wahren 2022-06-01 12:53 ` Stefan Wahren 2022-06-01 13:12 ` Peter Robinson 2022-06-01 13:12 ` Peter Robinson 2022-06-05 22:30 ` Rob Herring [this message] 2022-06-05 22:30 ` Rob Herring 2022-06-01 12:53 ` [PATCH V2 04/11] ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node Stefan Wahren 2022-06-01 12:53 ` Stefan Wahren 2022-06-01 12:53 ` [PATCH V2 05/11] ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node Stefan Wahren 2022-06-01 12:53 ` Stefan Wahren 2022-06-01 12:53 ` [PATCH V2 06/11] mfd: bcm2835-pm: Use 'reg-names' to get resources Stefan Wahren 2022-06-01 12:53 ` Stefan Wahren 2022-06-01 12:53 ` [PATCH V2 07/11] mfd: bcm2835-pm: Add support for BCM2711 Stefan Wahren 2022-06-01 12:53 ` Stefan Wahren 2022-06-01 13:14 ` Peter Robinson 2022-06-01 13:14 ` Peter Robinson 2022-06-01 12:53 ` [PATCH V2 08/11] soc: bcm: bcm2835-power: Refactor ASB control Stefan Wahren 2022-06-01 12:53 ` Stefan Wahren 2022-06-01 12:53 ` [PATCH V2 09/11] soc: bcm: bcm2835-power: Resolve ASB register macros Stefan Wahren 2022-06-01 12:53 ` Stefan Wahren 2022-06-01 12:53 ` [PATCH V2 10/11] soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB Stefan Wahren 2022-06-01 12:53 ` Stefan Wahren 2022-06-01 12:53 ` [PATCH V2 11/11] soc: bcm: bcm2835-power: Bypass power_on/off() calls Stefan Wahren 2022-06-01 12:53 ` Stefan Wahren 2022-06-01 13:19 ` [PATCH V2 00/11] soc: bcm2835-power: Prepare BCM2711 V3D support Peter Robinson 2022-06-01 13:19 ` Peter Robinson 2022-06-01 13:31 ` Stefan Wahren 2022-06-01 13:31 ` Stefan Wahren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220605223058.GA3644760-robh@kernel.org \ --to=robh@kernel.org \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=devicetree@vger.kernel.org \ --cc=f.fainelli@gmail.com \ --cc=lee.jones@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-rpi-kernel@lists.infradead.org \ --cc=maxime@cerno.tech \ --cc=melissa.srw@gmail.com \ --cc=nsaenz@kernel.org \ --cc=pbrobinson@gmail.com \ --cc=phil@raspberrypi.com \ --cc=rjui@broadcom.com \ --cc=sbranden@broadcom.com \ --cc=stefan.wahren@i2se.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.