All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>,
	Michael Kelley <mikelley@microsoft.com>,
	Siddharth Chandrasekaran <sidcha@amazon.de>,
	Yuan Yao <yuan.yao@linux.intel.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v6 10/38] KVM: x86: hyper-v: Don't use sparse_set_to_vcpu_mask() in kvm_hv_send_ipi()
Date: Mon,  6 Jun 2022 10:36:27 +0200	[thread overview]
Message-ID: <20220606083655.2014609-11-vkuznets@redhat.com> (raw)
In-Reply-To: <20220606083655.2014609-1-vkuznets@redhat.com>

Get rid of on-stack allocation of vcpu_mask and optimize kvm_hv_send_ipi()
for a smaller number of vCPUs in the request. When Hyper-V TLB flush
is in  use, HvSendSyntheticClusterIpi{,Ex} calls are not commonly used to
send IPIs to a large number of vCPUs (and are rarely used in general).

Introduce hv_is_vp_in_sparse_set() to directly check if the specified
VP_ID is present in sparse vCPU set.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
 arch/x86/kvm/hyperv.c | 37 ++++++++++++++++++++++++++-----------
 1 file changed, 26 insertions(+), 11 deletions(-)

diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index c43355cb60bc..b347971b3924 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -1747,6 +1747,25 @@ static void sparse_set_to_vcpu_mask(struct kvm *kvm, u64 *sparse_banks,
 	}
 }
 
+static bool hv_is_vp_in_sparse_set(u32 vp_id, u64 valid_bank_mask, u64 sparse_banks[])
+{
+	int bank, sbank = 0;
+
+	if (!test_bit(vp_id / HV_VCPUS_PER_SPARSE_BANK,
+		      (unsigned long *)&valid_bank_mask))
+		return false;
+
+	for_each_set_bit(bank, (unsigned long *)&valid_bank_mask,
+			 KVM_HV_MAX_SPARSE_VCPU_SET_BITS) {
+		if (bank == vp_id / HV_VCPUS_PER_SPARSE_BANK)
+			break;
+		sbank++;
+	}
+
+	return test_bit(vp_id % HV_VCPUS_PER_SPARSE_BANK,
+			(unsigned long *)&sparse_banks[sbank]);
+}
+
 struct kvm_hv_hcall {
 	u64 param;
 	u64 ingpa;
@@ -2029,8 +2048,8 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
 		((u64)hc->rep_cnt << HV_HYPERCALL_REP_COMP_OFFSET);
 }
 
-static void kvm_send_ipi_to_many(struct kvm *kvm, u32 vector,
-				 unsigned long *vcpu_bitmap)
+static void kvm_hv_send_ipi_to_many(struct kvm *kvm, u32 vector,
+				    u64 *sparse_banks, u64 valid_bank_mask)
 {
 	struct kvm_lapic_irq irq = {
 		.delivery_mode = APIC_DM_FIXED,
@@ -2040,7 +2059,10 @@ static void kvm_send_ipi_to_many(struct kvm *kvm, u32 vector,
 	unsigned long i;
 
 	kvm_for_each_vcpu(i, vcpu, kvm) {
-		if (vcpu_bitmap && !test_bit(i, vcpu_bitmap))
+		if (sparse_banks &&
+		    !hv_is_vp_in_sparse_set(kvm_hv_get_vpindex(vcpu),
+					    valid_bank_mask,
+					    sparse_banks))
 			continue;
 
 		/* We fail only when APIC is disabled */
@@ -2053,7 +2075,6 @@ static u64 kvm_hv_send_ipi(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
 	struct kvm *kvm = vcpu->kvm;
 	struct hv_send_ipi_ex send_ipi_ex;
 	struct hv_send_ipi send_ipi;
-	DECLARE_BITMAP(vcpu_mask, KVM_MAX_VCPUS);
 	unsigned long valid_bank_mask;
 	u64 sparse_banks[KVM_HV_MAX_SPARSE_VCPU_SET_BITS];
 	u32 vector;
@@ -2115,13 +2136,7 @@ static u64 kvm_hv_send_ipi(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
 	if ((vector < HV_IPI_LOW_VECTOR) || (vector > HV_IPI_HIGH_VECTOR))
 		return HV_STATUS_INVALID_HYPERCALL_INPUT;
 
-	if (all_cpus) {
-		kvm_send_ipi_to_many(kvm, vector, NULL);
-	} else {
-		sparse_set_to_vcpu_mask(kvm, sparse_banks, valid_bank_mask, vcpu_mask);
-
-		kvm_send_ipi_to_many(kvm, vector, vcpu_mask);
-	}
+	kvm_hv_send_ipi_to_many(kvm, vector, all_cpus ? NULL : sparse_banks, valid_bank_mask);
 
 ret_success:
 	return HV_STATUS_SUCCESS;
-- 
2.35.3


  parent reply	other threads:[~2022-06-06  8:38 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-06  8:36 [PATCH v6 00/38] KVM: x86: hyper-v: Fine-grained TLB flush + L2 TLB flush features Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 01/38] KVM: x86: Rename 'enable_direct_tlbflush' to 'enable_l2_tlb_flush' Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 02/38] KVM: x86: hyper-v: Resurrect dedicated KVM_REQ_HV_TLB_FLUSH flag Vitaly Kuznetsov
2022-06-07  8:46   ` Maxim Levitsky
2022-06-06  8:36 ` [PATCH v6 03/38] KVM: x86: hyper-v: Introduce TLB flush fifo Vitaly Kuznetsov
2022-06-07  8:57   ` Maxim Levitsky
2022-06-08  7:47     ` Vitaly Kuznetsov
2022-06-08  8:46       ` Maxim Levitsky
2022-06-06  8:36 ` [PATCH v6 04/38] KVM: x86: hyper-v: Add helper to read hypercall data for array Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 05/38] KVM: x86: hyper-v: Handle HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST{,EX} calls gently Vitaly Kuznetsov
2022-06-07  9:30   ` Maxim Levitsky
2022-06-13 12:58     ` Vitaly Kuznetsov
2022-06-08 10:18   ` Yuan Yao
2022-06-09  9:13     ` Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 06/38] KVM: x86: hyper-v: Expose support for extended gva ranges for flush hypercalls Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 07/38] KVM: x86: Prepare kvm_hv_flush_tlb() to handle L2's GPAs Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 08/38] x86/hyperv: Introduce HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK constants Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 09/38] KVM: x86: hyper-v: Use HV_MAX_SPARSE_VCPU_BANKS/HV_VCPUS_PER_SPARSE_BANK instead of raw '64' Vitaly Kuznetsov
2022-06-06  8:36 ` Vitaly Kuznetsov [this message]
2022-06-06  8:36 ` [PATCH v6 11/38] KVM: x86: hyper-v: Create a separate fifo for L2 TLB flush Vitaly Kuznetsov
2022-06-07  9:33   ` Maxim Levitsky
2022-06-06  8:36 ` [PATCH v6 12/38] KVM: x86: hyper-v: Use preallocated buffer in 'struct kvm_vcpu_hv' instead of on-stack 'sparse_banks' Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 13/38] KVM: nVMX: Keep track of hv_vm_id/hv_vp_id when eVMCS is in use Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 14/38] KVM: nSVM: Keep track of Hyper-V hv_vm_id/hv_vp_id Vitaly Kuznetsov
2022-06-07  9:36   ` Maxim Levitsky
2022-06-06  8:36 ` [PATCH v6 15/38] KVM: x86: Introduce .hv_inject_synthetic_vmexit_post_tlb_flush() nested hook Vitaly Kuznetsov
2022-06-07  9:41   ` Maxim Levitsky
2022-06-06  8:36 ` [PATCH v6 16/38] KVM: x86: hyper-v: Introduce kvm_hv_is_tlb_flush_hcall() Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 17/38] KVM: x86: hyper-v: L2 TLB flush Vitaly Kuznetsov
2022-06-07  9:47   ` Maxim Levitsky
2022-06-06  8:36 ` [PATCH v6 18/38] KVM: x86: hyper-v: Introduce fast guest_hv_cpuid_has_l2_tlb_flush() check Vitaly Kuznetsov
2022-06-07  9:48   ` Maxim Levitsky
2022-06-06  8:36 ` [PATCH v6 19/38] x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 20/38] KVM: nVMX: hyper-v: Cache VP assist page in 'struct kvm_vcpu_hv' Vitaly Kuznetsov
2022-06-07  9:56   ` Maxim Levitsky
2022-06-06  8:36 ` [PATCH v6 21/38] KVM: nVMX: hyper-v: Enable L2 TLB flush Vitaly Kuznetsov
2022-06-07 10:02   ` Maxim Levitsky
2022-06-06  8:36 ` [PATCH v6 22/38] KVM: nSVM: " Vitaly Kuznetsov
2022-06-07 10:02   ` Maxim Levitsky
2022-06-06  8:36 ` [PATCH v6 23/38] KVM: x86: Expose Hyper-V L2 TLB flush feature Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 24/38] KVM: selftests: Better XMM read/write helpers Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 25/38] KVM: selftests: Move HYPERV_LINUX_OS_ID definition to a common header Vitaly Kuznetsov
2022-06-07 10:03   ` Maxim Levitsky
2022-06-06  8:36 ` [PATCH v6 26/38] KVM: selftests: Move the function doing Hyper-V hypercall " Vitaly Kuznetsov
2022-06-07 10:03   ` Maxim Levitsky
2022-06-06  8:36 ` [PATCH v6 27/38] KVM: selftests: Hyper-V PV IPI selftest Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 28/38] KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 29/38] KVM: selftests: Export vm_vaddr_unused_gap() to make it possible to request unmapped ranges Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 30/38] KVM: selftests: Export _vm_get_page_table_entry() Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 31/38] KVM: selftests: Hyper-V PV TLB flush selftest Vitaly Kuznetsov
2022-06-07 12:14   ` Maxim Levitsky
2022-06-06  8:36 ` [PATCH v6 32/38] KVM: selftests: Sync 'struct hv_enlightened_vmcs' definition with hyperv-tlfs.h Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 33/38] KVM: selftests: nVMX: Allocate Hyper-V partition assist page Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 34/38] KVM: selftests: nSVM: Allocate Hyper-V partition assist and VP assist pages Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 35/38] KVM: selftests: Sync 'struct hv_vp_assist_page' definition with hyperv-tlfs.h Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 36/38] KVM: selftests: evmcs_test: Introduce L2 TLB flush test Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 37/38] KVM: selftests: Move Hyper-V VP assist page enablement out of evmcs.h Vitaly Kuznetsov
2022-06-06  8:36 ` [PATCH v6 38/38] KVM: selftests: hyperv_svm_test: Introduce L2 TLB flush test Vitaly Kuznetsov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220606083655.2014609-11-vkuznets@redhat.com \
    --to=vkuznets@redhat.com \
    --cc=jmattson@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mikelley@microsoft.com \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=sidcha@amazon.de \
    --cc=wanpengli@tencent.com \
    --cc=yuan.yao@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.