All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Tony Luck <tony.luck@intel.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Wolfram Sang <wsa@kernel.org>, Jean Delvare <jdelvare@suse.de>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Henning Schild <henning.schild@siemens.com>,
	Lee Jones <lee.jones@linaro.org>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	Hans de Goede <hdegoede@redhat.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Jonathan Yong <jonathan.yong@intel.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	linux-kernel@vger.kernel.org, linux-edac@vger.kernel.org,
	linux-i2c@vger.kernel.org, linux-leds@vger.kernel.org,
	linux-gpio@vger.kernel.org, platform-driver-x86@vger.kernel.org,
	linux-watchdog@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	James Morse <james.morse@arm.com>,
	Robert Richter <rric@kernel.org>,
	Jean Delvare <jdelvare@suse.com>, Pavel Machek <pavel@ucw.cz>,
	Peter Tyser <ptyser@xes-inc.com>,
	Andy Shevchenko <andy@kernel.org>,
	Mark Gross <markgross@kernel.org>
Subject: [PATCH v6 12/12] leds: simatic-ipc-leds-gpio: add GPIO version of Siemens driver
Date: Mon,  6 Jun 2022 19:41:38 +0300	[thread overview]
Message-ID: <20220606164138.66535-13-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20220606164138.66535-1-andriy.shevchenko@linux.intel.com>

From: Henning Schild <henning.schild@siemens.com>

On Apollo Lake the pinctrl drivers will now come up without ACPI. Use
that instead of open coding it.
Create a new driver for that which can later be filled with more GPIO
based models, and which has different dependencies.

Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/leds/simple/Kconfig                 |   7 +-
 drivers/leds/simple/Makefile                |   1 +
 drivers/leds/simple/simatic-ipc-leds-gpio.c | 105 ++++++++++++++++++++
 drivers/leds/simple/simatic-ipc-leds.c      |  80 +--------------
 drivers/platform/x86/simatic-ipc.c          |   5 +-
 5 files changed, 117 insertions(+), 81 deletions(-)
 create mode 100644 drivers/leds/simple/simatic-ipc-leds-gpio.c

diff --git a/drivers/leds/simple/Kconfig b/drivers/leds/simple/Kconfig
index bbf8cff3c3f6..fd2b8225d926 100644
--- a/drivers/leds/simple/Kconfig
+++ b/drivers/leds/simple/Kconfig
@@ -1,12 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config LEDS_SIEMENS_SIMATIC_IPC
 	tristate "LED driver for Siemens Simatic IPCs"
-	depends on LEDS_CLASS
+	depends on LEDS_GPIO
 	depends on SIEMENS_SIMATIC_IPC
-	select P2SB
 	help
 	  This option enables support for the LEDs of several Industrial PCs
 	  from Siemens.
 
-	  To compile this driver as a module, choose M here: the module
-	  will be called simatic-ipc-leds.
+	  To compile this driver as a module, choose M here: the modules
+	  will be called simatic-ipc-leds and simatic-ipc-leds-gpio.
diff --git a/drivers/leds/simple/Makefile b/drivers/leds/simple/Makefile
index 8481f1e9e360..1c7ef5e1324b 100644
--- a/drivers/leds/simple/Makefile
+++ b/drivers/leds/simple/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_LEDS_SIEMENS_SIMATIC_IPC)	+= simatic-ipc-leds.o
+obj-$(CONFIG_LEDS_SIEMENS_SIMATIC_IPC)	+= simatic-ipc-leds-gpio.o
diff --git a/drivers/leds/simple/simatic-ipc-leds-gpio.c b/drivers/leds/simple/simatic-ipc-leds-gpio.c
new file mode 100644
index 000000000000..4c9e663a90ba
--- /dev/null
+++ b/drivers/leds/simple/simatic-ipc-leds-gpio.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Siemens SIMATIC IPC driver for GPIO based LEDs
+ *
+ * Copyright (c) Siemens AG, 2022
+ *
+ * Authors:
+ *  Henning Schild <henning.schild@siemens.com>
+ */
+
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+static struct gpiod_lookup_table simatic_ipc_led_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 51, NULL, 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 52, NULL, 1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 53, NULL, 2, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 57, NULL, 3, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 58, NULL, 4, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 60, NULL, 5, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 56, NULL, 6, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 59, NULL, 7, GPIO_ACTIVE_HIGH),
+	},
+};
+
+static const struct gpio_led simatic_ipc_gpio_leds[] = {
+	{ .name = "green:" LED_FUNCTION_STATUS "-3" },
+	{ .name = "red:" LED_FUNCTION_STATUS "-1" },
+	{ .name = "green:" LED_FUNCTION_STATUS "-1" },
+	{ .name = "red:" LED_FUNCTION_STATUS "-2" },
+	{ .name = "green:" LED_FUNCTION_STATUS "-2" },
+	{ .name = "red:" LED_FUNCTION_STATUS "-3" },
+};
+
+static const struct gpio_led_platform_data simatic_ipc_gpio_leds_pdata = {
+	.num_leds	= ARRAY_SIZE(simatic_ipc_gpio_leds),
+	.leds		= simatic_ipc_gpio_leds,
+};
+
+static struct platform_device *simatic_leds_pdev;
+
+static int simatic_ipc_leds_gpio_remove(struct platform_device *pdev)
+{
+	gpiod_remove_lookup_table(&simatic_ipc_led_gpio_table);
+	platform_device_unregister(simatic_leds_pdev);
+
+	return 0;
+}
+
+static int simatic_ipc_leds_gpio_probe(struct platform_device *pdev)
+{
+	struct gpio_desc *gpiod;
+	int err;
+
+	gpiod_add_lookup_table(&simatic_ipc_led_gpio_table);
+	simatic_leds_pdev = platform_device_register_resndata(NULL,
+		"leds-gpio", PLATFORM_DEVID_NONE, NULL, 0,
+		&simatic_ipc_gpio_leds_pdata,
+		sizeof(simatic_ipc_gpio_leds_pdata));
+	if (IS_ERR(simatic_leds_pdev)) {
+		err = PTR_ERR(simatic_leds_pdev);
+		goto out;
+	}
+
+	/* PM_BIOS_BOOT_N */
+	gpiod = gpiod_get_index(&simatic_leds_pdev->dev, NULL, 6, GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod)) {
+		err = PTR_ERR(gpiod);
+		goto out;
+	}
+	gpiod_put(gpiod);
+
+	/* PM_WDT_OUT */
+	gpiod = gpiod_get_index(&simatic_leds_pdev->dev, NULL, 7, GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod)) {
+		err = PTR_ERR(gpiod);
+		goto out;
+	}
+	gpiod_put(gpiod);
+
+	return 0;
+out:
+	simatic_ipc_leds_gpio_remove(pdev);
+
+	return err;
+}
+
+static struct platform_driver simatic_ipc_led_gpio_driver = {
+	.probe = simatic_ipc_leds_gpio_probe,
+	.remove = simatic_ipc_leds_gpio_remove,
+	.driver = {
+		.name = KBUILD_MODNAME,
+	}
+};
+module_platform_driver(simatic_ipc_led_gpio_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
+MODULE_SOFTDEP("pre: platform:leds-gpio");
+MODULE_AUTHOR("Henning Schild <henning.schild@siemens.com>");
diff --git a/drivers/leds/simple/simatic-ipc-leds.c b/drivers/leds/simple/simatic-ipc-leds.c
index 2e7597c143d8..4894c228c165 100644
--- a/drivers/leds/simple/simatic-ipc-leds.c
+++ b/drivers/leds/simple/simatic-ipc-leds.c
@@ -15,7 +15,6 @@
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/pci.h>
-#include <linux/platform_data/x86/p2sb.h>
 #include <linux/platform_data/x86/simatic-ipc-base.h>
 #include <linux/platform_device.h>
 #include <linux/sizes.h>
@@ -24,7 +23,7 @@
 #define SIMATIC_IPC_LED_PORT_BASE	0x404E
 
 struct simatic_ipc_led {
-	unsigned int value; /* mask for io and offset for mem */
+	unsigned int value; /* mask for io */
 	char *name;
 	struct led_classdev cdev;
 };
@@ -39,21 +38,6 @@ static struct simatic_ipc_led simatic_ipc_leds_io[] = {
 	{ }
 };
 
-/* the actual start will be discovered with p2sb, 0 is a placeholder */
-static struct resource simatic_ipc_led_mem_res = DEFINE_RES_MEM_NAMED(0, 0, KBUILD_MODNAME);
-
-static void __iomem *simatic_ipc_led_memory;
-
-static struct simatic_ipc_led simatic_ipc_leds_mem[] = {
-	{0x500 + 0x1A0, "red:" LED_FUNCTION_STATUS "-1"},
-	{0x500 + 0x1A8, "green:" LED_FUNCTION_STATUS "-1"},
-	{0x500 + 0x1C8, "red:" LED_FUNCTION_STATUS "-2"},
-	{0x500 + 0x1D0, "green:" LED_FUNCTION_STATUS "-2"},
-	{0x500 + 0x1E0, "red:" LED_FUNCTION_STATUS "-3"},
-	{0x500 + 0x198, "green:" LED_FUNCTION_STATUS "-3"},
-	{ }
-};
-
 static struct resource simatic_ipc_led_io_res =
 	DEFINE_RES_IO_NAMED(SIMATIC_IPC_LED_PORT_BASE, SZ_2, KBUILD_MODNAME);
 
@@ -89,28 +73,6 @@ static enum led_brightness simatic_ipc_led_get_io(struct led_classdev *led_cd)
 	return inw(SIMATIC_IPC_LED_PORT_BASE) & led->value ? LED_OFF : led_cd->max_brightness;
 }
 
-static void simatic_ipc_led_set_mem(struct led_classdev *led_cd,
-				    enum led_brightness brightness)
-{
-	struct simatic_ipc_led *led = cdev_to_led(led_cd);
-	void __iomem *reg = simatic_ipc_led_memory + led->value;
-	u32 val;
-
-	val = readl(reg);
-	val = (val & ~1) | (brightness == LED_OFF);
-	writel(val, reg);
-}
-
-static enum led_brightness simatic_ipc_led_get_mem(struct led_classdev *led_cd)
-{
-	struct simatic_ipc_led *led = cdev_to_led(led_cd);
-	void __iomem *reg = simatic_ipc_led_memory + led->value;
-	u32 val;
-
-	val = readl(reg);
-	return (val & 1) ? LED_OFF : led_cd->max_brightness;
-}
-
 static int simatic_ipc_leds_probe(struct platform_device *pdev)
 {
 	const struct simatic_ipc_platform *plat = pdev->dev.platform_data;
@@ -118,9 +80,7 @@ static int simatic_ipc_leds_probe(struct platform_device *pdev)
 	struct simatic_ipc_led *ipcled;
 	struct led_classdev *cdev;
 	struct resource *res;
-	void __iomem *reg;
-	int err, type;
-	u32 val;
+	int err;
 
 	switch (plat->devmode) {
 	case SIMATIC_IPC_DEVICE_227D:
@@ -135,51 +95,19 @@ static int simatic_ipc_leds_probe(struct platform_device *pdev)
 			}
 			ipcled = simatic_ipc_leds_io;
 		}
-		type = IORESOURCE_IO;
 		if (!devm_request_region(dev, res->start, resource_size(res), KBUILD_MODNAME)) {
 			dev_err(dev, "Unable to register IO resource at %pR\n", res);
 			return -EBUSY;
 		}
 		break;
-	case SIMATIC_IPC_DEVICE_127E:
-		res = &simatic_ipc_led_mem_res;
-		ipcled = simatic_ipc_leds_mem;
-		type = IORESOURCE_MEM;
-
-		err = p2sb_bar(NULL, 0, res);
-		if (err)
-			return err;
-
-		/* do the final address calculation */
-		res->start = res->start + (0xC5 << 16);
-		res->end = res->start + SZ_4K - 1;
-
-		simatic_ipc_led_memory = devm_ioremap_resource(dev, res);
-		if (IS_ERR(simatic_ipc_led_memory))
-			return PTR_ERR(simatic_ipc_led_memory);
-
-		/* initialize power/watchdog LED */
-		reg = simatic_ipc_led_memory + 0x500 + 0x1D8; /* PM_WDT_OUT */
-		val = readl(reg);
-		writel(val & ~1, reg);
-
-		reg = simatic_ipc_led_memory + 0x500 + 0x1C0; /* PM_BIOS_BOOT_N */
-		val = readl(reg);
-		writel(val | 1, reg);
-		break;
 	default:
 		return -ENODEV;
 	}
 
 	while (ipcled->value) {
 		cdev = &ipcled->cdev;
-		if (type == IORESOURCE_MEM) {
-			cdev->brightness_set = simatic_ipc_led_set_mem;
-			cdev->brightness_get = simatic_ipc_led_get_mem;
-		} else {
-			cdev->brightness_set = simatic_ipc_led_set_io;
-			cdev->brightness_get = simatic_ipc_led_get_io;
-		}
+		cdev->brightness_set = simatic_ipc_led_set_io;
+		cdev->brightness_get = simatic_ipc_led_get_io;
 		cdev->max_brightness = LED_ON;
 		cdev->name = ipcled->name;
 
diff --git a/drivers/platform/x86/simatic-ipc.c b/drivers/platform/x86/simatic-ipc.c
index 26c35e1660cb..ca3647b751d5 100644
--- a/drivers/platform/x86/simatic-ipc.c
+++ b/drivers/platform/x86/simatic-ipc.c
@@ -51,6 +51,7 @@ static int register_platform_devices(u32 station_id)
 {
 	u8 ledmode = SIMATIC_IPC_DEVICE_NONE;
 	u8 wdtmode = SIMATIC_IPC_DEVICE_NONE;
+	char *pdevname = KBUILD_MODNAME "_leds";
 	int i;
 
 	platform_data.devmode = SIMATIC_IPC_DEVICE_NONE;
@@ -64,10 +65,12 @@ static int register_platform_devices(u32 station_id)
 	}
 
 	if (ledmode != SIMATIC_IPC_DEVICE_NONE) {
+		if (ledmode == SIMATIC_IPC_DEVICE_127E)
+			pdevname = KBUILD_MODNAME "_leds_gpio";
 		platform_data.devmode = ledmode;
 		ipc_led_platform_device =
 			platform_device_register_data(NULL,
-				KBUILD_MODNAME "_leds", PLATFORM_DEVID_NONE,
+				pdevname, PLATFORM_DEVID_NONE,
 				&platform_data,
 				sizeof(struct simatic_ipc_platform));
 		if (IS_ERR(ipc_led_platform_device))
-- 
2.35.1


  parent reply	other threads:[~2022-06-06 16:46 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-06 16:41 [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 01/12] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 02/12] pinctrl: intel: Check against matching data instead of ACPI companion Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 03/12] mfd: lpc_ich: Factor out lpc_ich_enable_spi_write() Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 04/12] mfd: lpc_ich: Switch to generic p2sb_bar() Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 05/12] mfd: lpc_ich: Add support for pinctrl in non-ACPI system Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 06/12] i2c: i801: convert to use common P2SB accessor Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 07/12] EDAC, pnd2: Use proper I/O accessors and address space annotation Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 08/12] EDAC, pnd2: convert to use common P2SB accessor Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 09/12] watchdog: simatic-ipc-wdt: convert to use " Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 10/12] leds: simatic-ipc-leds: " Andy Shevchenko
2022-06-06 16:41 ` [PATCH v6 11/12] platform/x86: simatic-ipc: drop custom P2SB bar code Andy Shevchenko
2022-06-07 17:15   ` Hans de Goede
2022-06-06 16:41 ` Andy Shevchenko [this message]
2022-08-01 14:09   ` [PATCH v6 12/12] leds: simatic-ipc-leds-gpio: add GPIO version of Siemens driver Henning Schild
2022-08-02 10:54     ` Henning Schild
2022-06-07 17:16 ` [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper Hans de Goede
2022-06-08  7:42 ` Lee Jones
2022-06-08 10:50   ` Andy Shevchenko
2022-06-21 11:58     ` Andy Shevchenko
2022-06-29 16:39       ` Andy Shevchenko
2022-06-29 17:14         ` Henning Schild
2022-07-13 16:40           ` Andy Shevchenko
2022-07-13 16:51             ` Rafael J. Wysocki
2022-07-13 18:48             ` Henning Schild
2022-07-14  9:37               ` Lee Jones
2022-07-14 10:23                 ` Andy Shevchenko
2022-07-14 10:34                   ` Lee Jones
2022-07-14 11:03                     ` Henning Schild
2022-07-14 11:26   ` Pavel Machek
2022-07-14 12:10     ` Lee Jones
2022-07-17 10:27       ` Pavel Machek
2022-07-18 11:17 ` Andy Shevchenko
2022-08-10  7:38   ` Henning Schild

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220606164138.66535-13-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=andy@kernel.org \
    --cc=bp@alien8.de \
    --cc=hdegoede@redhat.com \
    --cc=henning.schild@siemens.com \
    --cc=hkallweit1@gmail.com \
    --cc=james.morse@arm.com \
    --cc=jdelvare@suse.com \
    --cc=jdelvare@suse.de \
    --cc=jonathan.yong@intel.com \
    --cc=lee.jones@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=markgross@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=pavel@ucw.cz \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=ptyser@xes-inc.com \
    --cc=rric@kernel.org \
    --cc=tony.luck@intel.com \
    --cc=wim@linux-watchdog.org \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.