All of lore.kernel.org
 help / color / mirror / Atom feed
From: GitHub issues - edited <github@alsa-project.org>
To: alsa-devel@alsa-project.org
Subject: ASUS ROG Maximus Z690 Hero (ALC4082) - No audio from microphone, no audio on the front panel
Date: Mon,  6 Jun 2022 18:53:46 +0200 (CEST)	[thread overview]
Message-ID: <20220606165346.58C71F80089@alsa1.perex.cz> (raw)
In-Reply-To: <1654534417897471905-webhooks-bot@alsa-project.org>

alsa-project/alsa-ucm-conf issue #165 was edited from Lastique:

I'm having a problem with getting audio from the microphone connected to the rear panel jack. Also, if I connect the headset to the front panel headphone/mic jacks, I get neither audio out or in. My main concern is the rear panel jack though. The motherboard is ASUS ROG Maximus Z690 Hero, ALC4082 USB Audio chipset.

I have tried this:

1. Installed linux kernel 5.18.0.
2. Copied `ucm2` from alsa-ucm-conf master (rev ef3b6513b6581705d36432428a7f6a4ae23b1276 which is after https://github.com/alsa-project/alsa-ucm-conf/pull/143 was merged) to `/usr/share/alsa`.
3. In `/usr/share/alsa/ucm2/USB-Audio/USB-Audio.conf` added hardware id of my USB Audio device (`0b05:1a27`) to the `realtek-alc4080` rule. Also added the hardware id in `/usr/share/alsa/ucm2/USB-Audio/Realtek/ALC4080-HiFi.conf`, in the `asus-rog-usb` block condition.
4. Rebooted.
5. The headset is connected to the rear panel (Front out and Mic in jacks; also tried Line in).

There are three devices for the USB Audio card, and there are three volume controls in alsamixer: "Line", "Mic" and "Analog In". The problem is that there is no audio coming from the first two devices (which are presumably "Line" and "Mic"). I can record audio from the third device ("Analog In") when the microphone is connected to Mic jack.

Unfortunately, "Analog In" cannot be selected in PulseAudio for some reason (I created a [bug](https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/1364) for PA), which means no audio can be recorded.

I also tried to connect the headset to the front panel connectors, but got no audio output nor capture. This is not my intended configuration though, I normally connect the headset to the rear panel.

`arecord` output:
[arecord.txt](https://github.com/alsa-project/alsa-ucm-conf/files/8838239/arecord.txt)
`lsusb` output:
[lsusb.txt](https://github.com/alsa-project/alsa-ucm-conf/files/8838250/lsusb.txt)
`alsa-info.sh` output:
[alsa-info.txt](https://github.com/alsa-project/alsa-ucm-conf/files/8846120/alsa-info.txt)


This is on Kubuntu 22.04.

Issue URL     : https://github.com/alsa-project/alsa-ucm-conf/issues/165
Repository URL: https://github.com/alsa-project/alsa-ucm-conf

       reply	other threads:[~2022-06-06 16:54 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1654534417897471905-webhooks-bot@alsa-project.org>
2022-06-06 16:53 ` GitHub issues - edited [this message]
     [not found] <1654360111754354000-webhooks-bot@alsa-project.org>
2022-06-04 16:28 ` ASUS ROG Maximus Z690 Hero (ALC4082) - No audio from microphone, no audio on the front panel GitHub issues - edited
     [not found] <1654359895755600929-webhooks-bot@alsa-project.org>
2022-06-04 16:25 ` GitHub issues - edited
     [not found] <1654359857600541115-webhooks-bot@alsa-project.org>
2022-06-04 16:24 ` GitHub issues - edited
     [not found] <1654359694501735926-webhooks-bot@alsa-project.org>
2022-06-04 16:21 ` GitHub issues - opened

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220606165346.58C71F80089@alsa1.perex.cz \
    --to=github@alsa-project.org \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.