All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sughosh Ganu <sughosh.ganu@linaro.org>
To: u-boot@lists.denx.de
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>,
	Ilias Apalodimas <ilias.apalodimas@linaro.org>,
	Takahiro Akashi <takahiro.akashi@linaro.org>,
	Patrick Delaunay <patrick.delaunay@foss.st.com>,
	Patrice Chotard <patrice.chotard@foss.st.com>,
	Simon Glass <sjg@chromium.org>, Bin Meng <bmeng.cn@gmail.com>,
	Tom Rini <trini@konsulko.com>,
	Etienne Carriere <etienne.carriere@linaro.org>,
	Michal Simek <monstr@monstr.eu>,
	Jassi Brar <jaswinder.singh@linaro.org>,
	Sughosh Ganu <sughosh.ganu@linaro.org>
Subject: [PATCH v5 08/23] FWU: Add boot time checks as highlighted by the FWU specification
Date: Thu,  9 Jun 2022 17:59:55 +0530	[thread overview]
Message-ID: <20220609123010.1017463-9-sughosh.ganu@linaro.org> (raw)
In-Reply-To: <20220609123010.1017463-1-sughosh.ganu@linaro.org>

The FWU Multi Bank Update specification requires the Update Agent to
carry out certain checks at the time of platform boot. The Update
Agent is the component which is responsible for updating the firmware
components and maintaining and keeping the metadata in sync.

The spec requires that the Update Agent perform the following checks
at the time of boot
* Sanity check of both the metadata copies maintained by the platform.
* Get the boot index passed to U-Boot by the prior stage bootloader
  and use this value for metadata bookkeeping.
* Check if the system is booting in Trial State. If the system boots
  in the Trial State for more than a specified number of boot counts,
  change the Active Bank to be booting the platform from.

Add these checks in the board initialisation sequence, invoked after
relocation.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
---
 common/board_r.c      |   5 ++
 include/fwu.h         |   3 +
 lib/fwu_updates/fwu.c | 170 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 178 insertions(+)
 create mode 100644 lib/fwu_updates/fwu.c

diff --git a/common/board_r.c b/common/board_r.c
index 6f4aca2077..33a600715d 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -15,6 +15,7 @@
 #include <cpu_func.h>
 #include <exports.h>
 #include <flash.h>
+#include <fwu.h>
 #include <hang.h>
 #include <image.h>
 #include <irq_func.h>
@@ -797,6 +798,10 @@ static init_fnc_t init_sequence_r[] = {
 #if defined(CONFIG_PRAM)
 	initr_mem,
 #endif
+
+#ifdef CONFIG_FWU_MULTI_BANK_UPDATE
+	fwu_boottime_checks,
+#endif
 	run_main_loop,
 };
 
diff --git a/include/fwu.h b/include/fwu.h
index 41774ff9e2..8fbd91b463 100644
--- a/include/fwu.h
+++ b/include/fwu.h
@@ -33,6 +33,9 @@ struct fwu_mdata_ops {
 	EFI_GUID(0x8a7a84a0, 0x8387, 0x40f6, 0xab, 0x41, \
 		 0xa8, 0xb9, 0xa5, 0xa6, 0x0d, 0x23)
 
+int fwu_boottime_checks(void);
+u8 fwu_update_checks_pass(void);
+
 int fwu_get_mdata(struct fwu_mdata **mdata);
 int fwu_update_mdata(struct fwu_mdata *mdata);
 int fwu_get_active_index(u32 *active_idx);
diff --git a/lib/fwu_updates/fwu.c b/lib/fwu_updates/fwu.c
new file mode 100644
index 0000000000..af884439fb
--- /dev/null
+++ b/lib/fwu_updates/fwu.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dm.h>
+#include <efi.h>
+#include <efi_loader.h>
+#include <efi_variable.h>
+#include <fwu.h>
+#include <fwu_mdata.h>
+#include <malloc.h>
+
+#include <linux/errno.h>
+#include <linux/types.h>
+
+static u8 trial_state;
+static u8 boottime_check;
+
+static int fwu_trial_state_check(void)
+{
+	int ret, i;
+	efi_status_t status;
+	efi_uintn_t var_size;
+	u16 trial_state_ctr;
+	u32 nimages, active_bank, var_attributes, active_idx;
+	struct fwu_mdata *mdata = NULL;
+	struct fwu_image_entry *img_entry;
+	struct fwu_image_bank_info *img_bank_info;
+
+	ret = fwu_get_mdata(&mdata);
+	if (ret)
+		return ret;
+
+	ret = 0;
+	nimages = CONFIG_FWU_NUM_IMAGES_PER_BANK;
+	active_bank = mdata->active_index;
+	img_entry = &mdata->img_entry[0];
+	for (i = 0; i < nimages; i++) {
+		img_bank_info = &img_entry[i].img_bank_info[active_bank];
+		if (!img_bank_info->accepted) {
+			trial_state = 1;
+			break;
+		}
+	}
+
+	if (trial_state) {
+		var_size = (efi_uintn_t)sizeof(trial_state_ctr);
+		log_info("System booting in Trial State\n");
+		var_attributes = EFI_VARIABLE_NON_VOLATILE |
+			EFI_VARIABLE_BOOTSERVICE_ACCESS;
+		status = efi_get_variable_int(L"TrialStateCtr",
+					      &efi_global_variable_guid,
+					      &var_attributes,
+					      &var_size, &trial_state_ctr,
+					      NULL);
+		if (status != EFI_SUCCESS) {
+			log_err("Unable to read TrialStateCtr variable\n");
+			ret = -1;
+			goto out;
+		}
+
+		++trial_state_ctr;
+		if (trial_state_ctr > CONFIG_FWU_TRIAL_STATE_CNT) {
+			log_info("Trial State count exceeded. Revert back to previous_active_index\n");
+			active_idx = mdata->active_index;
+			ret = fwu_revert_boot_index();
+			if (ret) {
+				log_err("Unable to revert active_index\n");
+				goto out;
+			}
+
+			trial_state_ctr = 0;
+			status = efi_set_variable_int(L"TrialStateCtr",
+						      &efi_global_variable_guid,
+						      var_attributes,
+						      0,
+						      &trial_state_ctr, false);
+			if (status != EFI_SUCCESS) {
+				log_err("Unable to clear TrialStateCtr variable\n");
+				ret = -1;
+				goto out;
+			}
+		} else {
+			status = efi_set_variable_int(L"TrialStateCtr",
+						      &efi_global_variable_guid,
+						      var_attributes,
+						      var_size,
+						      &trial_state_ctr, false);
+			if (status != EFI_SUCCESS) {
+				log_err("Unable to increment TrialStateCtr variable\n");
+				ret = -1;
+				goto out;
+			}
+		}
+	} else {
+		trial_state_ctr = 0;
+		status = efi_set_variable_int(L"TrialStateCtr",
+					      &efi_global_variable_guid,
+					      0,
+					      0, &trial_state_ctr,
+					      NULL);
+	}
+
+out:
+	free(mdata);
+	return ret;
+}
+
+u8 fwu_update_checks_pass(void)
+{
+	return !trial_state && boottime_check;
+}
+
+int fwu_boottime_checks(void)
+{
+	int ret;
+	struct udevice *dev;
+	u32 boot_idx, active_idx;
+
+	if (uclass_get_device(UCLASS_FWU_MDATA, 0, &dev) || !dev) {
+		log_err("FWU Metadata device not found\n");
+		return 0;
+	}
+
+	ret = fwu_mdata_check();
+	if (ret) {
+		return 0;
+	}
+
+	/*
+	 * Get the Boot Index, i.e. the bank from
+	 * which the platform has booted. This value
+	 * gets passed from the ealier stage bootloader
+	 * which booted u-boot, e.g. tf-a. If the
+	 * boot index is not the same as the
+	 * active_index read from the FWU metadata,
+	 * update the active_index.
+	 */
+	fwu_plat_get_bootidx(&boot_idx);
+	if (boot_idx >= CONFIG_FWU_NUM_BANKS) {
+		log_err("Received incorrect value of boot_index\n");
+		return 0;
+	}
+
+	ret = fwu_get_active_index(&active_idx);
+	if (ret) {
+		log_err("Unable to read active_index\n");
+		return 0;
+	}
+
+	if (boot_idx != active_idx) {
+		log_info("Boot idx %u is not matching active idx %u, changing active_idx\n",
+			 boot_idx, active_idx);
+		ret = fwu_update_active_index(boot_idx);
+		if (!ret)
+			boottime_check = 1;
+
+		return 0;
+	}
+
+	if (efi_init_obj_list() != EFI_SUCCESS)
+		return 0;
+
+	ret = fwu_trial_state_check();
+	if (!ret)
+		boottime_check = 1;
+
+	return 0;
+}
-- 
2.25.1


  parent reply	other threads:[~2022-06-09 12:32 UTC|newest]

Thread overview: 104+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-09 12:29 [PATCH v5 00/23] FWU: Add FWU Multi Bank Update feature support Sughosh Ganu
2022-06-09 12:29 ` [PATCH v5 01/23] dt/bindings: Add bindings for FWU Metadata storage device Sughosh Ganu
2022-06-16 13:34   ` Michal Simek
2022-06-17  6:21     ` Sughosh Ganu
2022-06-09 12:29 ` [PATCH v5 02/23] FWU: Add FWU metadata structure and driver for accessing metadata Sughosh Ganu
2022-06-21 10:54   ` Etienne Carriere
2022-06-23  6:24     ` Sughosh Ganu
2022-06-23 11:55       ` Etienne Carriere
2022-06-09 12:29 ` [PATCH v5 03/23] FWU: Add FWU metadata access driver for GPT partitioned block devices Sughosh Ganu
2022-06-21  9:34   ` Patrick DELAUNAY
2022-06-22 12:39     ` Patrick DELAUNAY
2022-06-28 10:01     ` Sughosh Ganu
2022-06-21 10:55   ` Etienne Carriere
2022-06-28 10:11     ` Sughosh Ganu
2022-06-09 12:29 ` [PATCH v5 04/23] stm32mp1: dk2: Add a node for the FWU metadata device Sughosh Ganu
2022-06-21  9:36   ` Patrick DELAUNAY
2022-06-09 12:29 ` [PATCH v5 05/23] stm32mp1: dk2: Add image information for capsule updates Sughosh Ganu
2022-06-09 12:29 ` [PATCH v5 06/23] FWU: stm32mp1: Add helper functions for accessing FWU metadata Sughosh Ganu
2022-06-10 11:53   ` Ilias Apalodimas
2022-06-13 12:37     ` Sughosh Ganu
2022-06-21  9:49   ` Patrick DELAUNAY
2022-06-23  6:04     ` Sughosh Ganu
2022-06-09 12:29 ` [PATCH v5 07/23] FWU: STM32MP1: Add support to read boot index from backup register Sughosh Ganu
2022-06-10 12:02   ` Ilias Apalodimas
2022-06-21 11:27   ` Patrick DELAUNAY
2022-06-23  6:30     ` Sughosh Ganu
2022-06-09 12:29 ` Sughosh Ganu [this message]
2022-06-15  6:34   ` [PATCH v5 08/23] FWU: Add boot time checks as highlighted by the FWU specification Heinrich Schuchardt
2022-06-15  6:39     ` Takahiro Akashi
2022-06-21 10:56   ` Etienne Carriere
2022-06-23  9:45     ` Sughosh Ganu
2022-06-23 12:32       ` Etienne Carriere
2022-06-28 10:42         ` Sughosh Ganu
2022-06-21 11:46   ` Patrick DELAUNAY
2022-06-23  9:49     ` Sughosh Ganu
2022-06-09 12:29 ` [PATCH v5 09/23] FWU: Add support for the FWU Multi Bank Update feature Sughosh Ganu
2022-06-21 10:56   ` Etienne Carriere
2022-06-21 11:55   ` Patrick DELAUNAY
2022-06-09 12:29 ` [PATCH v5 10/23] FWU: cmd: Add a command to read FWU metadata Sughosh Ganu
2022-06-10 12:07   ` Ilias Apalodimas
2022-06-13 12:38     ` Sughosh Ganu
2022-06-20 12:53   ` Michal Simek
2022-06-21 12:07   ` Patrick DELAUNAY
2022-06-09 12:29 ` [PATCH v5 11/23] mkeficapsule: Add support for generating empty capsules Sughosh Ganu
2022-06-09 16:27   ` Heinrich Schuchardt
2022-06-13 12:33     ` Sughosh Ganu
2022-06-15  5:11   ` Takahiro Akashi
2022-06-15 10:49     ` Sughosh Ganu
2022-06-16  1:01       ` Takahiro Akashi
2022-06-16  7:12         ` Sughosh Ganu
2022-06-17  0:46           ` Takahiro Akashi
2022-06-17  8:01             ` Sughosh Ganu
2022-06-21 10:58   ` Etienne Carriere
2022-06-09 12:29 ` [PATCH v5 12/23] FWU: doc: Add documentation for the FWU feature Sughosh Ganu
2022-06-21 12:12   ` Patrick DELAUNAY
2022-06-09 12:30 ` [PATCH v5 13/23] FWU: Add FWU metadata access driver for non-GPT MTD devices Sughosh Ganu
2022-06-21 10:56   ` Etienne Carriere
2022-06-21 12:39   ` Patrick DELAUNAY
2022-06-09 12:30 ` [PATCH v5 14/23] dt/bindings: firmware: Add FWU metadata on MTD devices binding Sughosh Ganu
2022-06-21 10:56   ` Etienne Carriere
2022-06-21 12:26   ` Patrick DELAUNAY
2022-06-09 12:30 ` [PATCH v5 15/23] tools: Add mkfwumdata tool for FWU metadata image Sughosh Ganu
2022-06-21 10:57   ` Etienne Carriere
2022-06-21 12:59     ` Michal Simek
2022-06-21 12:55   ` Patrick DELAUNAY
2022-06-09 12:30 ` [PATCH v5 16/23] FWU: doc: Update documentation for the FWU non-GPT MTD Sughosh Ganu
2022-06-09 12:30 ` [PATCH v5 17/23] synquacer: Update for TBBR (BL2) based new FIP layout Sughosh Ganu
2022-06-09 12:30 ` [PATCH v5 18/23] developerbox: synquacer: Use FIP as the updatable image Sughosh Ganu
2022-06-09 12:30 ` [PATCH v5 19/23] FWU: synquacer: Add FWU Multi bank update support for DeveloperBox Sughosh Ganu
2022-06-17 14:00   ` Michal Simek
2022-06-20  8:23   ` Michal Simek
2022-07-18 14:43     ` Jassi Brar
2022-07-18 14:46       ` Ilias Apalodimas
2022-07-18 15:08         ` Jassi Brar
2022-07-18 15:16           ` Ilias Apalodimas
2022-07-18 15:31             ` Jassi Brar
2022-07-18 15:34               ` Ilias Apalodimas
2022-07-18 15:34               ` Jassi Brar
2022-07-18 15:37                 ` Ilias Apalodimas
2022-07-18 21:00               ` Tom Rini
2022-07-19 15:23                 ` Jassi Brar
2022-07-20  1:17                   ` Tom Rini
2022-07-19 15:27                 ` Jassi Brar
2022-07-20  7:53                   ` Ilias Apalodimas
2022-07-20 14:30                     ` Jassi Brar
2022-07-22  8:37                       ` Ilias Apalodimas
2022-07-22 17:01                         ` Jassi Brar
2022-06-09 12:30 ` [PATCH v5 20/23] FWU: synquacer: Generate dfu_alt_info from devicetree partition Sughosh Ganu
2022-06-17 14:02   ` Michal Simek
2022-07-18 14:49     ` Jassi Brar
2022-07-20  1:13       ` Takahiro Akashi
2022-07-20  3:16         ` Jassi Brar
2022-06-09 12:30 ` [PATCH v5 21/23] doc: synquacer: Add how to enable FWU Multi Bank Update Sughosh Ganu
2022-06-17 13:59   ` Michal Simek
2022-06-09 12:30 ` [PATCH v5 22/23] [TEMP]configs: synquacer: Add FWU support for DeveloperBox Sughosh Ganu
2022-06-09 12:30 ` [PATCH v5 23/23] sandbox: fwu: Add support for testing FWU feature on sandbox Sughosh Ganu
2022-06-15  5:37   ` Takahiro Akashi
2022-06-15 12:10     ` Sughosh Ganu
2022-06-17  1:08       ` Takahiro Akashi
2022-06-17  7:57         ` Sughosh Ganu
2022-06-15  6:30   ` Takahiro Akashi
2022-06-15 12:13     ` Sughosh Ganu
2022-06-20 18:12 ` [PATCH v5 00/23] FWU: Add FWU Multi Bank Update feature support Patrick DELAUNAY
2022-06-21  9:23   ` Sughosh Ganu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220609123010.1017463-9-sughosh.ganu@linaro.org \
    --to=sughosh.ganu@linaro.org \
    --cc=bmeng.cn@gmail.com \
    --cc=etienne.carriere@linaro.org \
    --cc=ilias.apalodimas@linaro.org \
    --cc=jaswinder.singh@linaro.org \
    --cc=monstr@monstr.eu \
    --cc=patrice.chotard@foss.st.com \
    --cc=patrick.delaunay@foss.st.com \
    --cc=sjg@chromium.org \
    --cc=takahiro.akashi@linaro.org \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    --cc=xypron.glpk@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.