[PATCH] ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices

[PATCH] ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices

[John Veness]

Treat the claimed 96kHz 1ch in the descriptors as 48kHz 2ch, so that
the audio stream doesn't sound mono. Also fix initial stream
alignment, so that left and right channels are in the correct order.

Signed-off-by: John Veness <john-linux@pelago.org.uk>
---
 sound/usb/quirks-table.h | 48 ++++++++++++++++++++++++++++++++++++++++
 sound/usb/quirks.c       |  3 +++
 2 files changed, 51 insertions(+)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 4f56e1784932..853da162fd18 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3802,6 +3802,54 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 
+/*
+ * MacroSilicon MS2100/MS2106 based AV capture cards
+ *
+ * These claim 96kHz 1ch in the descriptors, but are actually 48kHz 2ch.
+ * They also need QUIRK_FLAG_ALIGN_TRANSFER, which makes one wonder if
+ * they pretend to be 96kHz mono as a workaround for stereo being broken
+ * by that...
+ *
+ * They also have an issue with initial stream alignment that causes the
+ * channels to be swapped and out of phase, which is dealt with in quirks.c.
+ */
+{
+	USB_AUDIO_DEVICE(0x534d, 0x0021),
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.vendor_name = "MacroSilicon",
+		.product_name = "MS210x",
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = &(const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 2,
+				.type = QUIRK_AUDIO_STANDARD_MIXER,
+			},
+			{
+				.ifnum = 3,
+				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
+				.data = &(const struct audioformat) {
+					.formats = SNDRV_PCM_FMTBIT_S16_LE,
+					.channels = 2,
+					.iface = 3,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.attributes = 0,
+					.endpoint = 0x82,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC |
+						USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_CONTINUOUS,
+					.rate_min = 48000,
+					.rate_max = 48000,
+				}
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
+
 /*
  * MacroSilicon MS2109 based HDMI capture cards
  *
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index e8468f9b007d..a72874bc0936 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1478,6 +1478,7 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
 	case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */
 		set_format_emu_quirk(subs, fmt);
 		break;
+	case USB_ID(0x534d, 0x0021): /* MacroSilicon MS2100/MS2106 */
 	case USB_ID(0x534d, 0x2109): /* MacroSilicon MS2109 */
 		subs->stream_offset_adj = 2;
 		break;
@@ -1904,6 +1905,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
 		   QUIRK_FLAG_IGNORE_CTL_ERROR),
 	DEVICE_FLG(0x413c, 0xa506, /* Dell AE515 sound bar */
 		   QUIRK_FLAG_GET_SAMPLE_RATE),
+	DEVICE_FLG(0x534d, 0x0021, /* MacroSilicon MS2100/MS2106 */
+		   QUIRK_FLAG_ALIGN_TRANSFER),
 	DEVICE_FLG(0x534d, 0x2109, /* MacroSilicon MS2109 */
 		   QUIRK_FLAG_ALIGN_TRANSFER),
 	DEVICE_FLG(0x1224, 0x2a25, /* Jieli Technology USB PHY 2.0 */
-- 
2.34.1

Re: [PATCH] ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices

[Takashi Iwai]

On Fri, 24 Jun 2022 16:07:57 +0200,
John Veness wrote:
> 
> Treat the claimed 96kHz 1ch in the descriptors as 48kHz 2ch, so that
> the audio stream doesn't sound mono. Also fix initial stream
> alignment, so that left and right channels are in the correct order.
> 
> Signed-off-by: John Veness <john-linux@pelago.org.uk>

Thanks, applied now.


Takashi