[PATCH v4 1/3] ARM: dts: qcom: extend scm compatible to match dt-schema

[PATCH v4 1/3] ARM: dts: qcom: extend scm compatible to match dt-schema

[David Heidelberg]

First device specific compatible, then general one.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 2 +-
 arch/arm/boot/dts/qcom-apq8084.dtsi | 2 +-
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
 arch/arm/boot/dts/qcom-msm8974.dtsi | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 9120d10dcd9e..67e625e56e04 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -309,7 +309,7 @@ dsps_smsm: dsps@4 {
 
 	firmware {
 		scm {
-			compatible = "qcom,scm-apq8064";
+			compatible = "qcom,scm-apq8064", "qcom,scm";
 
 			clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
 			clock-names = "core";
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index cb01faa23eb7..123c0c32d1df 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -95,7 +95,7 @@ memory {
 
 	firmware {
 		scm {
-			compatible = "qcom,scm";
+			compatible = "qcom,scm-apq8084", "qcom,scm";
 			clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
 			clock-names = "core", "bus", "iface";
 		};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index c5da723f7674..4faf854aab9c 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -156,7 +156,7 @@ xo: xo {
 
 	firmware {
 		scm {
-			compatible = "qcom,scm-ipq4019";
+			compatible = "qcom,scm-ipq4019", "qcom,scm";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 804d094c4d79..4cbd8d91f7d0 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -96,7 +96,7 @@ CPU_SPC: spc {
 
 	firmware {
 		scm {
-			compatible = "qcom,scm";
+			compatible = "qcom,scm-msm8974", "qcom,scm";
 			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
 			clock-names = "core", "bus", "iface";
 		};
-- 
2.35.1

[PATCH v4 2/3] arm64: dts: qcom: extend scm compatible strings

[David Heidelberg]

First device specific compatible, then general one.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/msm8953.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/sm8250.dtsi  | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 748575ed1490..19228e4f5313 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -125,7 +125,7 @@ opp-1800000000 {
 
 	firmware {
 		scm {
-			compatible = "qcom,scm";
+			compatible = "qcom,scm-ipq6018", "qcom,scm";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index ffc3ec2cd3bc..6fd361be0fe2 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -215,7 +215,7 @@ L2_1: l2-cache_1 {
 
 	firmware {
 		scm: scm {
-			compatible = "qcom,scm-msm8953";
+			compatible = "qcom,scm-msm8953", "qcom,scm";
 			clocks = <&gcc GCC_CRYPTO_CLK>,
 				 <&gcc GCC_CRYPTO_AXI_CLK>,
 				 <&gcc GCC_CRYPTO_AHB_CLK>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index ab95ec4a7491..7c854c9c2517 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -357,7 +357,7 @@ opp-2150400000 {
 
 	firmware {
 		scm {
-			compatible = "qcom,scm-msm8996";
+			compatible = "qcom,scm-msm8996", "qcom,scm";
 			qcom,dload-mode = <&tcsr 0x13000>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index d0760e6ec942..fc4a490add48 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -628,7 +628,7 @@ cpu7_opp20: opp-2841600000 {
 
 	firmware {
 		scm: scm {
-			compatible = "qcom,scm";
+			compatible = "qcom,scm-sm8250", "qcom,scm";
 			#reset-cells = <1>;
 		};
 	};
-- 
2.35.1

[PATCH v4 3/3] dt-bindings: firmware: convert Qualcomm SCM binding to the yaml

[David Heidelberg]

Convert Qualcomm SCM firmware binding to the yaml format.

This commit also:
 - adds qcom,scm-mdm9607 into list which has only core clock
 - adds qcom,scm-sm6125, qcom,scm-ipq6018
 - #reset-cells, because the property is already used

Signed-off-by: David Heidelberg <david@ixit.cz>
--
v4:
 - added clocks minItems and maxItems
 - removed quotes from $id and $schema
 - adjusted description of TCSR HW block
v3:
 - add preceding patches for ARM and arm64 adding missing compatible strings
 - extended with missing compatible strings
 - added two additional maintainers, see https://lkml.org/lkml/2022/6/23/1969
v2:
 - changed maintainer to Bjorn
 - document #reset-cells
---
 .../devicetree/bindings/firmware/qcom,scm.txt |  57 -------
 .../bindings/firmware/qcom,scm.yaml           | 140 ++++++++++++++++++
 2 files changed, 140 insertions(+), 57 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/firmware/qcom,scm.txt
 create mode 100644 Documentation/devicetree/bindings/firmware/qcom,scm.yaml

diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
deleted file mode 100644
index 0f4e5ab26477..000000000000
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-QCOM Secure Channel Manager (SCM)
-
-Qualcomm processors include an interface to communicate to the secure firmware.
-This interface allows for clients to request different types of actions.  These
-can include CPU power up/down, HDCP requests, loading of firmware, and other
-assorted actions.
-
-Required properties:
-- compatible: must contain one of the following:
- * "qcom,scm-apq8064"
- * "qcom,scm-apq8084"
- * "qcom,scm-ipq4019"
- * "qcom,scm-ipq806x"
- * "qcom,scm-ipq8074"
- * "qcom,scm-mdm9607"
- * "qcom,scm-msm8226"
- * "qcom,scm-msm8660"
- * "qcom,scm-msm8916"
- * "qcom,scm-msm8953"
- * "qcom,scm-msm8960"
- * "qcom,scm-msm8974"
- * "qcom,scm-msm8976"
- * "qcom,scm-msm8994"
- * "qcom,scm-msm8996"
- * "qcom,scm-msm8998"
- * "qcom,scm-sc7180"
- * "qcom,scm-sc7280"
- * "qcom,scm-sdm845"
- * "qcom,scm-sdx55"
- * "qcom,scm-sm6350"
- * "qcom,scm-sm8150"
- * "qcom,scm-sm8250"
- * "qcom,scm-sm8350"
- * "qcom,scm-sm8450"
- and:
- * "qcom,scm"
-- clocks: Specifies clocks needed by the SCM interface, if any:
- * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
-   "qcom,scm-msm8960"
- * core, iface and bus clocks required for "qcom,scm-apq8084",
-   "qcom,scm-msm8916", "qcom,scm-msm8953", "qcom,scm-msm8974" and "qcom,scm-msm8976"
-- clock-names: Must contain "core" for the core clock, "iface" for the interface
-  clock and "bus" for the bus clock per the requirements of the compatible.
-- qcom,dload-mode: phandle to the TCSR hardware block and offset of the
-		   download mode control register (optional)
-
-Example for MSM8916:
-
-	firmware {
-		scm {
-			compatible = "qcom,msm8916", "qcom,scm";
-			clocks = <&gcc GCC_CRYPTO_CLK> ,
-				 <&gcc GCC_CRYPTO_AXI_CLK>,
-				 <&gcc GCC_CRYPTO_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
new file mode 100644
index 000000000000..b01acbd1e408
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/qcom,scm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM Secure Channel Manager (SCM)
+
+description: |
+  Qualcomm processors include an interface to communicate to the secure firmware.
+  This interface allows for clients to request different types of actions.
+  These can include CPU power up/down, HDCP requests, loading of firmware,
+  and other assorted actions.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Robert Marko <robimarko@gmail.com>
+  - Guru Das Srinagesh <quic_gurus@quicinc.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,scm-apq8064
+          - qcom,scm-apq8084
+          - qcom,scm-ipq4019
+          - qcom,scm-ipq6018
+          - qcom,scm-ipq806x
+          - qcom,scm-ipq8074
+          - qcom,scm-mdm9607
+          - qcom,scm-msm8226
+          - qcom,scm-msm8660
+          - qcom,scm-msm8916
+          - qcom,scm-msm8953
+          - qcom,scm-msm8960
+          - qcom,scm-msm8974
+          - qcom,scm-msm8976
+          - qcom,scm-msm8994
+          - qcom,scm-msm8996
+          - qcom,scm-msm8998
+          - qcom,scm-sc7180
+          - qcom,scm-sc7280
+          - qcom,scm-sdm845
+          - qcom,scm-sdx55
+          - qcom,scm-sm6125
+          - qcom,scm-sm6350
+          - qcom,scm-sm8150
+          - qcom,scm-sm8250
+          - qcom,scm-sm8350
+          - qcom,scm-sm8450
+          - qcom,scm-qcs404
+      - const: qcom,scm
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  '#reset-cells':
+    const: 1
+
+  qcom,dload-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TCSR hardware block
+          - description: offset of the download mode control register
+    description: TCSR hardware block
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8064
+              - qcom,scm-mdm9607
+              - qcom,scm-msm8660
+              - qcom,scm-msm8960
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: core
+
+        clocks:
+          maxItems: 1
+
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8084
+              - qcom,scm-msm8916
+              - qcom,scm-msm8953
+              - qcom,scm-msm8974
+              - qcom,scm-msm8976
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: core
+            - const: bus
+            - const: iface
+
+        clocks:
+          minItems: 3
+          maxItems: 3
+
+
+      required:
+        - clocks
+        - clock-names
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    include <dt-bindings/clock/qcom,gcc-msm8916.h>
+
+    firmware {
+        scm {
+            compatible = "qcom,msm8916", "qcom,scm";
+            clocks = <&gcc GCC_CRYPTO_CLK>,
+                     <&gcc GCC_CRYPTO_AXI_CLK>,
+                     <&gcc GCC_CRYPTO_AHB_CLK>;
+            clock-names = "core", "bus", "iface";
+        };
+    };
-- 
2.35.1

Re: [PATCH v4 3/3] dt-bindings: firmware: convert Qualcomm SCM binding to the yaml

[Krzysztof Kozlowski]

On 26/06/2022 20:32, David Heidelberg wrote:
> Convert Qualcomm SCM firmware binding to the yaml format.
> 
> This commit also:
>  - adds qcom,scm-mdm9607 into list which has only core clock
>  - adds qcom,scm-sm6125, qcom,scm-ipq6018
>  - #reset-cells, because the property is already used
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> --
> v4:
>  - added clocks minItems and maxItems
>  - removed quotes from $id and $schema
>  - adjusted description of TCSR HW block

Thank you for your patch. There is something to discuss/improve.

> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - qcom,scm-apq8064
> +          - qcom,scm-apq8084
> +          - qcom,scm-ipq4019
> +          - qcom,scm-ipq6018
> +          - qcom,scm-ipq806x
> +          - qcom,scm-ipq8074
> +          - qcom,scm-mdm9607
> +          - qcom,scm-msm8226
> +          - qcom,scm-msm8660
> +          - qcom,scm-msm8916
> +          - qcom,scm-msm8953
> +          - qcom,scm-msm8960
> +          - qcom,scm-msm8974
> +          - qcom,scm-msm8976
> +          - qcom,scm-msm8994
> +          - qcom,scm-msm8996
> +          - qcom,scm-msm8998
> +          - qcom,scm-sc7180
> +          - qcom,scm-sc7280
> +          - qcom,scm-sdm845
> +          - qcom,scm-sdx55
> +          - qcom,scm-sm6125
> +          - qcom,scm-sm6350
> +          - qcom,scm-sm8150
> +          - qcom,scm-sm8250
> +          - qcom,scm-sm8350
> +          - qcom,scm-sm8450
> +          - qcom,scm-qcs404
> +      - const: qcom,scm
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 3
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 3
> +
> +  '#reset-cells':
> +    const: 1
> +
> +  qcom,dload-mode:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      - items:
> +          - description: phandle to TCSR hardware block
> +          - description: offset of the download mode control register
> +    description: TCSR hardware block
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,scm-apq8064
> +              - qcom,scm-mdm9607
> +              - qcom,scm-msm8660
> +              - qcom,scm-msm8960
> +    then:
> +      properties:
> +        clock-names:
> +          items:
> +            - const: core
> +
> +        clocks:
> +          maxItems: 1
> +
> +      required:
> +        - clocks
> +        - clock-names
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,scm-apq8084
> +              - qcom,scm-msm8916
> +              - qcom,scm-msm8953
> +              - qcom,scm-msm8974
> +              - qcom,scm-msm8976
> +    then:
> +      properties:
> +        clock-names:
> +          items:
> +            - const: core
> +            - const: bus
> +            - const: iface
> +
> +        clocks:
> +          minItems: 3
> +          maxItems: 3
> +
> +

Just one blank line.

> +      required:
> +        - clocks
> +        - clock-names
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    include <dt-bindings/clock/qcom,gcc-msm8916.h>
> +
> +    firmware {
> +        scm {
> +            compatible = "qcom,msm8916", "qcom,scm";
> +            clocks = <&gcc GCC_CRYPTO_CLK>,
> +                     <&gcc GCC_CRYPTO_AXI_CLK>,
> +                     <&gcc GCC_CRYPTO_AHB_CLK>;
> +            clock-names = "core", "bus", "iface";
> +        };
> +    };


Best regards,
Krzysztof

Re: [PATCH v4 3/3] dt-bindings: firmware: convert Qualcomm SCM binding to the yaml

[Rob Herring]

On Sun, 26 Jun 2022 20:32:47 +0200, David Heidelberg wrote:
> Convert Qualcomm SCM firmware binding to the yaml format.
> 
> This commit also:
>  - adds qcom,scm-mdm9607 into list which has only core clock
>  - adds qcom,scm-sm6125, qcom,scm-ipq6018
>  - #reset-cells, because the property is already used
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> --
> v4:
>  - added clocks minItems and maxItems
>  - removed quotes from $id and $schema
>  - adjusted description of TCSR HW block
> v3:
>  - add preceding patches for ARM and arm64 adding missing compatible strings
>  - extended with missing compatible strings
>  - added two additional maintainers, see https://lkml.org/lkml/2022/6/23/1969
> v2:
>  - changed maintainer to Bjorn
>  - document #reset-cells
> ---
>  .../devicetree/bindings/firmware/qcom,scm.txt |  57 -------
>  .../bindings/firmware/qcom,scm.yaml           | 140 ++++++++++++++++++
>  2 files changed, 140 insertions(+), 57 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/firmware/qcom,scm.txt
>  create mode 100644 Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/firmware/qcom,scm.example.dts:18.17-18 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:383: Documentation/devicetree/bindings/firmware/qcom,scm.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1404: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Re: [PATCH v4 3/3] dt-bindings: firmware: convert Qualcomm SCM binding to the yaml

[Guru Das Srinagesh]

On Jun 26 2022 20:32, David Heidelberg wrote:
> Convert Qualcomm SCM firmware binding to the yaml format.
> 
> This commit also:
>  - adds qcom,scm-mdm9607 into list which has only core clock
>  - adds qcom,scm-sm6125, qcom,scm-ipq6018
>  - #reset-cells, because the property is already used
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> --
> v4:
>  - added clocks minItems and maxItems
>  - removed quotes from $id and $schema
>  - adjusted description of TCSR HW block
> v3:
>  - add preceding patches for ARM and arm64 adding missing compatible strings
>  - extended with missing compatible strings
>  - added two additional maintainers, see https://lkml.org/lkml/2022/6/23/1969
> v2:
>  - changed maintainer to Bjorn
>  - document #reset-cells
> ---
>  .../devicetree/bindings/firmware/qcom,scm.txt |  57 -------
>  .../bindings/firmware/qcom,scm.yaml           | 140 ++++++++++++++++++
>  2 files changed, 140 insertions(+), 57 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/firmware/qcom,scm.txt
>  create mode 100644 Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
> deleted file mode 100644
> index 0f4e5ab26477..000000000000
> --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
> +++ /dev/null
> @@ -1,57 +0,0 @@
> -QCOM Secure Channel Manager (SCM)
> -
> -Qualcomm processors include an interface to communicate to the secure firmware.
> -This interface allows for clients to request different types of actions.  These
> -can include CPU power up/down, HDCP requests, loading of firmware, and other
> -assorted actions.
> -
> -Required properties:
> -- compatible: must contain one of the following:
> - * "qcom,scm-apq8064"
> - * "qcom,scm-apq8084"
> - * "qcom,scm-ipq4019"
> - * "qcom,scm-ipq806x"
> - * "qcom,scm-ipq8074"
> - * "qcom,scm-mdm9607"
> - * "qcom,scm-msm8226"
> - * "qcom,scm-msm8660"
> - * "qcom,scm-msm8916"
> - * "qcom,scm-msm8953"
> - * "qcom,scm-msm8960"
> - * "qcom,scm-msm8974"
> - * "qcom,scm-msm8976"
> - * "qcom,scm-msm8994"
> - * "qcom,scm-msm8996"
> - * "qcom,scm-msm8998"
> - * "qcom,scm-sc7180"
> - * "qcom,scm-sc7280"
> - * "qcom,scm-sdm845"
> - * "qcom,scm-sdx55"
> - * "qcom,scm-sm6350"
> - * "qcom,scm-sm8150"
> - * "qcom,scm-sm8250"
> - * "qcom,scm-sm8350"
> - * "qcom,scm-sm8450"
> - and:
> - * "qcom,scm"
> -- clocks: Specifies clocks needed by the SCM interface, if any:
> - * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
> -   "qcom,scm-msm8960"
> - * core, iface and bus clocks required for "qcom,scm-apq8084",
> -   "qcom,scm-msm8916", "qcom,scm-msm8953", "qcom,scm-msm8974" and "qcom,scm-msm8976"
> -- clock-names: Must contain "core" for the core clock, "iface" for the interface
> -  clock and "bus" for the bus clock per the requirements of the compatible.
> -- qcom,dload-mode: phandle to the TCSR hardware block and offset of the
> -		   download mode control register (optional)
> -
> -Example for MSM8916:
> -
> -	firmware {
> -		scm {
> -			compatible = "qcom,msm8916", "qcom,scm";
> -			clocks = <&gcc GCC_CRYPTO_CLK> ,
> -				 <&gcc GCC_CRYPTO_AXI_CLK>,
> -				 <&gcc GCC_CRYPTO_AHB_CLK>;
> -			clock-names = "core", "bus", "iface";
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> new file mode 100644
> index 000000000000..b01acbd1e408
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> @@ -0,0 +1,140 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/firmware/qcom,scm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: QCOM Secure Channel Manager (SCM)
> +
> +description: |
> +  Qualcomm processors include an interface to communicate to the secure firmware.
> +  This interface allows for clients to request different types of actions.
> +  These can include CPU power up/down, HDCP requests, loading of firmware,
> +  and other assorted actions.
> +
> +maintainers:
> +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> +  - Robert Marko <robimarko@gmail.com>
> +  - Guru Das Srinagesh <quic_gurus@quicinc.com>
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - qcom,scm-apq8064
> +          - qcom,scm-apq8084
> +          - qcom,scm-ipq4019
> +          - qcom,scm-ipq6018
> +          - qcom,scm-ipq806x
> +          - qcom,scm-ipq8074
> +          - qcom,scm-mdm9607
> +          - qcom,scm-msm8226
> +          - qcom,scm-msm8660
> +          - qcom,scm-msm8916
> +          - qcom,scm-msm8953
> +          - qcom,scm-msm8960
> +          - qcom,scm-msm8974
> +          - qcom,scm-msm8976
> +          - qcom,scm-msm8994
> +          - qcom,scm-msm8996
> +          - qcom,scm-msm8998
> +          - qcom,scm-sc7180
> +          - qcom,scm-sc7280
> +          - qcom,scm-sdm845
> +          - qcom,scm-sdx55
> +          - qcom,scm-sm6125
> +          - qcom,scm-sm6350
> +          - qcom,scm-sm8150
> +          - qcom,scm-sm8250
> +          - qcom,scm-sm8350
> +          - qcom,scm-sm8450
> +          - qcom,scm-qcs404
> +      - const: qcom,scm
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 3
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 3
> +
> +  '#reset-cells':
> +    const: 1
> +
> +  qcom,dload-mode:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      - items:
> +          - description: phandle to TCSR hardware block
> +          - description: offset of the download mode control register
> +    description: TCSR hardware block
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,scm-apq8064

scm-apq8064 doesn't have the clock specified in the driver (there's a FIXME
comment to specify it), so even though the DT node specifies the clock, it
currently has no effect. We would need to check if the conditions for
re-enabling the clock are satisfied, and update the driver for this to take
effect.

> +              - qcom,scm-mdm9607

scm-mdm9607 has three clocks listed in the driver, not one. Please move this to
the "three-clocks" list below.

> +              - qcom,scm-msm8660
> +              - qcom,scm-msm8960

These two are good - they are listed as having a single clock each in the
driver.

> +    then:
> +      properties:
> +        clock-names:
> +          items:
> +            - const: core
> +
> +        clocks:
> +          maxItems: 1
> +
> +      required:
> +        - clocks
> +        - clock-names
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,scm-apq8084
> +              - qcom,scm-msm8916
> +              - qcom,scm-msm8953
> +              - qcom,scm-msm8974
> +              - qcom,scm-msm8976

Verified that the above five nodes are all listed as supporting three clocks
each in the driver.

> +    then:
> +      properties:
> +        clock-names:
> +          items:
> +            - const: core
> +            - const: bus
> +            - const: iface
> +
> +        clocks:
> +          minItems: 3
> +          maxItems: 3
> +
> +
> +      required:
> +        - clocks
> +        - clock-names
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    include <dt-bindings/clock/qcom,gcc-msm8916.h>
> +
> +    firmware {
> +        scm {
> +            compatible = "qcom,msm8916", "qcom,scm";
> +            clocks = <&gcc GCC_CRYPTO_CLK>,
> +                     <&gcc GCC_CRYPTO_AXI_CLK>,
> +                     <&gcc GCC_CRYPTO_AHB_CLK>;
> +            clock-names = "core", "bus", "iface";
> +        };
> +    };
> -- 
> 2.35.1
> 

Re: (subset) [PATCH v4 1/3] ARM: dts: qcom: extend scm compatible to match dt-schema

[Bjorn Andersson]

On Sun, 26 Jun 2022 20:32:45 +0200, David Heidelberg wrote:
> First device specific compatible, then general one.
> 
> 

Applied, thanks!

[1/3] ARM: dts: qcom: extend scm compatible to match dt-schema
      commit: 363c1b04cfce5615f2dc1b7f19e4456937ed2068

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>

Re: (subset) [PATCH v4 2/3] arm64: dts: qcom: extend scm compatible strings

[Bjorn Andersson]

On Sun, 26 Jun 2022 20:32:46 +0200, David Heidelberg wrote:
> First device specific compatible, then general one.
> 
> 

Applied, thanks!

[2/3] arm64: dts: qcom: extend scm compatible strings
      commit: b9c0c0e5da43ff3aa6dd93e2f994dc889dd5b261

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>