All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrea Mayer <andrea.mayer@uniroma2.it>
To: "David S. Miller" <davem@davemloft.net>,
	Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>,
	David Ahern <dsahern@kernel.org>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Shuah Khan <shuah@kernel.org>,
	Anton Makarov <anton.makarov11235@gmail.com>,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
	linux-kselftest@vger.kernel.org
Cc: Stefano Salsano <stefano.salsano@uniroma2.it>,
	Paolo Lungaroni <paolo.lungaroni@uniroma2.it>,
	Ahmed Abdelsalam <ahabdels.dev@gmail.com>,
	Andrea Mayer <andrea.mayer@uniroma2.it>
Subject: [net-next v3 1/4] seg6: add support for SRv6 H.Encaps.Red behavior
Date: Tue, 28 Jun 2022 13:36:39 +0200	[thread overview]
Message-ID: <20220628113642.3223-2-andrea.mayer@uniroma2.it> (raw)
In-Reply-To: <20220628113642.3223-1-andrea.mayer@uniroma2.it>

The SRv6 H.Encaps.Red behavior described in [1] is an optimization of
the SRv6 H.Encaps behavior [2].

H.Encaps.Red reduces the length of the SRH by excluding the first
segment (SID) in the SRH of the pushed IPv6 header. The first SID is
only placed in the IPv6 Destination Address field of the pushed IPv6
header.
When the SRv6 Policy only contains one SID the SRH is omitted, unless
there is an HMAC TLV to be carried.

[1] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.2
[2] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.1

Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Anton Makarov <anton.makarov11235@gmail.com>
---
 include/uapi/linux/seg6_iptunnel.h |   1 +
 net/ipv6/seg6_iptunnel.c           | 126 ++++++++++++++++++++++++++++-
 2 files changed, 126 insertions(+), 1 deletion(-)

diff --git a/include/uapi/linux/seg6_iptunnel.h b/include/uapi/linux/seg6_iptunnel.h
index eb815e0d0ac3..538152a7b2c3 100644
--- a/include/uapi/linux/seg6_iptunnel.h
+++ b/include/uapi/linux/seg6_iptunnel.h
@@ -35,6 +35,7 @@ enum {
 	SEG6_IPTUN_MODE_INLINE,
 	SEG6_IPTUN_MODE_ENCAP,
 	SEG6_IPTUN_MODE_L2ENCAP,
+	SEG6_IPTUN_MODE_ENCAP_RED,
 };
 
 #endif
diff --git a/net/ipv6/seg6_iptunnel.c b/net/ipv6/seg6_iptunnel.c
index d64855010948..4942073650d3 100644
--- a/net/ipv6/seg6_iptunnel.c
+++ b/net/ipv6/seg6_iptunnel.c
@@ -36,6 +36,7 @@ static size_t seg6_lwt_headroom(struct seg6_iptunnel_encap *tuninfo)
 	case SEG6_IPTUN_MODE_INLINE:
 		break;
 	case SEG6_IPTUN_MODE_ENCAP:
+	case SEG6_IPTUN_MODE_ENCAP_RED:
 		head = sizeof(struct ipv6hdr);
 		break;
 	case SEG6_IPTUN_MODE_L2ENCAP:
@@ -195,6 +196,122 @@ int seg6_do_srh_encap(struct sk_buff *skb, struct ipv6_sr_hdr *osrh, int proto)
 }
 EXPORT_SYMBOL_GPL(seg6_do_srh_encap);
 
+/* encapsulate an IPv6 packet within an outer IPv6 header with reduced SRH */
+static int seg6_do_srh_encap_red(struct sk_buff *skb,
+				 struct ipv6_sr_hdr *osrh, int proto)
+{
+	__u8 first_seg = osrh->first_segment;
+	struct dst_entry *dst = skb_dst(skb);
+	struct net *net = dev_net(dst->dev);
+	struct ipv6hdr *hdr, *inner_hdr;
+	int hdrlen = ipv6_optlen(osrh);
+	int red_tlv_offset, tlv_offset;
+	struct ipv6_sr_hdr *isrh;
+	bool skip_srh = false;
+	__be32 flowlabel;
+	int tot_len, err;
+	int red_hdrlen;
+	int tlvs_len;
+
+	if (first_seg > 0) {
+		red_hdrlen = hdrlen - sizeof(struct in6_addr);
+	} else {
+		/* NOTE: if tag/flags and/or other TLVs are introduced in the
+		 * seg6_iptunnel infrastructure, they should be considered when
+		 * deciding to skip the SRH.
+		 */
+		skip_srh = !sr_has_hmac(osrh);
+
+		red_hdrlen = skip_srh ? 0 : hdrlen;
+	}
+
+	tot_len = red_hdrlen + sizeof(struct ipv6hdr);
+
+	err = skb_cow_head(skb, tot_len + skb->mac_len);
+	if (unlikely(err))
+		return err;
+
+	inner_hdr = ipv6_hdr(skb);
+	flowlabel = seg6_make_flowlabel(net, skb, inner_hdr);
+
+	skb_push(skb, tot_len);
+	skb_reset_network_header(skb);
+	skb_mac_header_rebuild(skb);
+	hdr = ipv6_hdr(skb);
+
+	/* based on seg6_do_srh_encap() */
+	if (skb->protocol == htons(ETH_P_IPV6)) {
+		ip6_flow_hdr(hdr, ip6_tclass(ip6_flowinfo(inner_hdr)),
+			     flowlabel);
+		hdr->hop_limit = inner_hdr->hop_limit;
+	} else {
+		ip6_flow_hdr(hdr, 0, flowlabel);
+		hdr->hop_limit = ip6_dst_hoplimit(skb_dst(skb));
+
+		memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));
+		IP6CB(skb)->iif = skb->skb_iif;
+	}
+
+	/* no matter if we have to skip the SRH or not, the first segment
+	 * always comes in the pushed IPv6 header.
+	 */
+	hdr->daddr = osrh->segments[first_seg];
+
+	if (skip_srh) {
+		hdr->nexthdr = proto;
+
+		set_tun_src(net, dst->dev, &hdr->daddr, &hdr->saddr);
+		goto out;
+	}
+
+	/* we cannot skip the SRH, slow path */
+
+	hdr->nexthdr = NEXTHDR_ROUTING;
+	isrh = (void *)hdr + sizeof(struct ipv6hdr);
+
+	if (unlikely(!first_seg)) {
+		/* this is a very rare case; we have only one SID but
+		 * we cannot skip the SRH since we are carrying some
+		 * other info.
+		 */
+		memcpy(isrh, osrh, hdrlen);
+		goto srcaddr;
+	}
+
+	tlv_offset = sizeof(*osrh) + (first_seg + 1) * sizeof(struct in6_addr);
+	red_tlv_offset = tlv_offset - sizeof(struct in6_addr);
+
+	memcpy(isrh, osrh, red_tlv_offset);
+
+	tlvs_len = hdrlen - tlv_offset;
+	if (unlikely(tlvs_len > 0)) {
+		const void *s = (const void *)osrh + tlv_offset;
+		void *d = (void *)isrh + red_tlv_offset;
+
+		memcpy(d, s, tlvs_len);
+	}
+
+	--isrh->first_segment;
+	isrh->hdrlen -= 2;
+
+srcaddr:
+	isrh->nexthdr = proto;
+	set_tun_src(net, dst->dev, &hdr->daddr, &hdr->saddr);
+
+#ifdef CONFIG_IPV6_SEG6_HMAC
+	if (unlikely(!skip_srh && sr_has_hmac(isrh))) {
+		err = seg6_push_hmac(net, &hdr->saddr, isrh);
+		if (unlikely(err))
+			return err;
+	}
+#endif
+
+out:
+	skb_postpush_rcsum(skb, hdr, tot_len);
+
+	return 0;
+}
+
 /* insert an SRH within an IPv6 packet, just after the IPv6 header */
 int seg6_do_srh_inline(struct sk_buff *skb, struct ipv6_sr_hdr *osrh)
 {
@@ -265,6 +382,7 @@ static int seg6_do_srh(struct sk_buff *skb)
 			return err;
 		break;
 	case SEG6_IPTUN_MODE_ENCAP:
+	case SEG6_IPTUN_MODE_ENCAP_RED:
 		err = iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6);
 		if (err)
 			return err;
@@ -276,7 +394,11 @@ static int seg6_do_srh(struct sk_buff *skb)
 		else
 			return -EINVAL;
 
-		err = seg6_do_srh_encap(skb, tinfo->srh, proto);
+		if (tinfo->mode == SEG6_IPTUN_MODE_ENCAP)
+			err = seg6_do_srh_encap(skb, tinfo->srh, proto);
+		else
+			err = seg6_do_srh_encap_red(skb, tinfo->srh, proto);
+
 		if (err)
 			return err;
 
@@ -514,6 +636,8 @@ static int seg6_build_state(struct net *net, struct nlattr *nla,
 		break;
 	case SEG6_IPTUN_MODE_L2ENCAP:
 		break;
+	case SEG6_IPTUN_MODE_ENCAP_RED:
+		break;
 	default:
 		return -EINVAL;
 	}
-- 
2.20.1


  reply	other threads:[~2022-06-28 11:38 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-28 11:36 [net-next v3 0/4] seg6: add support for SRv6 Headend Reduced Encapsulation Andrea Mayer
2022-06-28 11:36 ` Andrea Mayer [this message]
2022-06-28 11:36 ` [net-next v3 2/4] seg6: add support for SRv6 H.L2Encaps.Red behavior Andrea Mayer
2022-06-28 11:36 ` [net-next v3 3/4] selftests: seg6: add selftest for SRv6 H.Encaps.Red behavior Andrea Mayer
2022-06-28 11:36 ` [net-next v3 4/4] selftests: seg6: add selftest for SRv6 H.L2Encaps.Red behavior Andrea Mayer
2022-06-29  5:10 ` [net-next v3 0/4] seg6: add support for SRv6 Headend Reduced Encapsulation Jakub Kicinski
2022-06-29 11:25   ` Andrea Mayer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220628113642.3223-2-andrea.mayer@uniroma2.it \
    --to=andrea.mayer@uniroma2.it \
    --cc=ahabdels.dev@gmail.com \
    --cc=anton.makarov11235@gmail.com \
    --cc=davem@davemloft.net \
    --cc=dsahern@kernel.org \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=paolo.lungaroni@uniroma2.it \
    --cc=shuah@kernel.org \
    --cc=stefano.salsano@uniroma2.it \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.