From: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
To: tommaso.merciai@amarulasolutions.com
Cc: linuxfancy@googlegroups.com, linux-amarula@amarulasolutions.com,
quentin.schulz@theobroma-systems.com,
Daniel Scally <djrscally@gmail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 3/6] media: ov5693: rename clk into xvclk
Date: Wed, 29 Jun 2022 17:29:30 +0200 [thread overview]
Message-ID: <20220629152933.422990-4-tommaso.merciai@amarulasolutions.com> (raw)
In-Reply-To: <20220629152933.422990-1-tommaso.merciai@amarulasolutions.com>
Rename clk pdata pointer into xvclk (system clock input).
Same for clk_rate into xvclk_rate. This is more explicit
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
---
drivers/media/i2c/ov5693.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/media/i2c/ov5693.c b/drivers/media/i2c/ov5693.c
index 9e84468d920e..d2adc5513a21 100644
--- a/drivers/media/i2c/ov5693.c
+++ b/drivers/media/i2c/ov5693.c
@@ -157,7 +157,7 @@ struct ov5693_device {
struct gpio_desc *reset;
struct gpio_desc *powerdown;
struct regulator_bulk_data supplies[OV5693_NUM_SUPPLIES];
- struct clk *clk;
+ struct clk *xvclk;
struct ov5693_mode {
struct v4l2_rect crop;
@@ -794,7 +794,7 @@ static void ov5693_sensor_powerdown(struct ov5693_device *ov5693)
regulator_bulk_disable(OV5693_NUM_SUPPLIES, ov5693->supplies);
- clk_disable_unprepare(ov5693->clk);
+ clk_disable_unprepare(ov5693->xvclk);
}
static int ov5693_sensor_powerup(struct ov5693_device *ov5693)
@@ -804,7 +804,7 @@ static int ov5693_sensor_powerup(struct ov5693_device *ov5693)
gpiod_set_value_cansleep(ov5693->reset, 1);
gpiod_set_value_cansleep(ov5693->powerdown, 1);
- ret = clk_prepare_enable(ov5693->clk);
+ ret = clk_prepare_enable(ov5693->xvclk);
if (ret) {
dev_err(ov5693->dev, "Failed to enable clk\n");
goto fail_power;
@@ -1390,7 +1390,7 @@ static int ov5693_check_hwcfg(struct ov5693_device *ov5693)
static int ov5693_probe(struct i2c_client *client)
{
struct ov5693_device *ov5693;
- u32 clk_rate;
+ u32 xvclk_rate;
int ret = 0;
ov5693 = devm_kzalloc(&client->dev, sizeof(*ov5693), GFP_KERNEL);
@@ -1408,16 +1408,16 @@ static int ov5693_probe(struct i2c_client *client)
v4l2_i2c_subdev_init(&ov5693->sd, client, &ov5693_ops);
- ov5693->clk = devm_clk_get(&client->dev, "xvclk");
- if (IS_ERR(ov5693->clk)) {
+ ov5693->xvclk = devm_clk_get(&client->dev, "xvclk");
+ if (IS_ERR(ov5693->xvclk)) {
dev_err(&client->dev, "Error getting clock\n");
- return PTR_ERR(ov5693->clk);
+ return PTR_ERR(ov5693->xvclk);
}
- clk_rate = clk_get_rate(ov5693->clk);
- if (clk_rate != OV5693_XVCLK_FREQ)
+ xvclk_rate = clk_get_rate(ov5693->xvclk);
+ if (xvclk_rate != OV5693_XVCLK_FREQ)
dev_warn(&client->dev, "Found clk freq %u, expected %u\n",
- clk_rate, OV5693_XVCLK_FREQ);
+ xvclk_rate, OV5693_XVCLK_FREQ);
ret = ov5693_configure_gpios(ov5693);
if (ret)
--
2.25.1
next prev parent reply other threads:[~2022-06-29 15:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-29 15:29 [PATCH v3 0/6] media: ov5693: cleanup code and add dts support Tommaso Merciai
2022-06-29 15:29 ` [PATCH v3 1/6] media: ov5693: count num_supplies using array_size Tommaso Merciai
2022-06-29 15:29 ` [PATCH v3 2/6] media: ov5693: add dvdd into ov5693_supply_names array Tommaso Merciai
2022-06-29 15:29 ` Tommaso Merciai [this message]
2022-06-29 15:29 ` [PATCH v3 4/6] media: ov5693: move hw cfg functions into ov5693_hwcfg Tommaso Merciai
2022-06-29 16:07 ` Jacopo Mondi
2022-06-30 7:59 ` Tommaso Merciai
2022-06-29 15:29 ` [PATCH v3 5/6] media: dt-bindings: ov5693: document YAML binding Tommaso Merciai
2022-06-29 18:14 ` Krzysztof Kozlowski
2022-06-30 7:55 ` Tommaso Merciai
2022-06-29 15:29 ` [PATCH v3 6/6] media: ov5693: add ov5693_of_match, dts support Tommaso Merciai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220629152933.422990-4-tommaso.merciai@amarulasolutions.com \
--to=tommaso.merciai@amarulasolutions.com \
--cc=djrscally@gmail.com \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linuxfancy@googlegroups.com \
--cc=mchehab@kernel.org \
--cc=quentin.schulz@theobroma-systems.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.