[PATCH v2 01/10] i2c: stm32: add support for the st,stm32mp13 SOC

[PATCH v2 01/10] i2c: stm32: add support for the st,stm32mp13 SOC

[Patrick Delaunay]

The stm32mp13 soc differs from the stm32mp15 in terms of
clear register offset for controlling the FMP (Fast Mode Plus).

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---

(no changes since v1)

 drivers/i2c/stm32f7_i2c.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c
index c6ae65badb7..bf2a6c9b4bd 100644
--- a/drivers/i2c/stm32f7_i2c.c
+++ b/drivers/i2c/stm32f7_i2c.c
@@ -267,6 +267,10 @@ static const struct stm32_i2c_data stm32mp15_data = {
 	.fmp_clr_offset = 0x40,
 };
 
+static const struct stm32_i2c_data stm32mp13_data = {
+	.fmp_clr_offset = 0x4,
+};
+
 static int stm32_i2c_check_device_busy(struct stm32_i2c_priv *i2c_priv)
 {
 	struct stm32_i2c_regs *regs = i2c_priv->regs;
@@ -957,6 +961,7 @@ static const struct dm_i2c_ops stm32_i2c_ops = {
 static const struct udevice_id stm32_i2c_of_match[] = {
 	{ .compatible = "st,stm32f7-i2c", .data = (ulong)&stm32f7_data },
 	{ .compatible = "st,stm32mp15-i2c", .data = (ulong)&stm32mp15_data },
+	{ .compatible = "st,stm32mp13-i2c", .data = (ulong)&stm32mp13_data },
 	{}
 };
 
-- 
2.25.1

[PATCH v2 02/10] rng: stm32mp1_rng: add conditional reset feature for STM32MP13x

[Patrick Delaunay]

From: Lionel Debieve <lionel.debieve@foss.st.com>

New IP adds a conditional reset that impact the clock
error management. It is now linked to a new compatible.

Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---

(no changes since v1)

 drivers/rng/stm32mp1_rng.c | 61 +++++++++++++++++++++++++++++---------
 1 file changed, 47 insertions(+), 14 deletions(-)

diff --git a/drivers/rng/stm32mp1_rng.c b/drivers/rng/stm32mp1_rng.c
index 8ea00e3e890..89da78c6c8b 100644
--- a/drivers/rng/stm32mp1_rng.c
+++ b/drivers/rng/stm32mp1_rng.c
@@ -18,22 +18,28 @@
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
 
-#define RNG_CR 0x00
-#define RNG_CR_RNGEN BIT(2)
-#define RNG_CR_CED BIT(5)
+#define RNG_CR		0x00
+#define RNG_CR_RNGEN	BIT(2)
+#define RNG_CR_CED	BIT(5)
+#define RNG_CR_CONDRST	BIT(30)
 
-#define RNG_SR 0x04
-#define RNG_SR_SEIS BIT(6)
-#define RNG_SR_CEIS BIT(5)
-#define RNG_SR_SECS BIT(2)
-#define RNG_SR_DRDY BIT(0)
+#define RNG_SR		0x04
+#define RNG_SR_SEIS	BIT(6)
+#define RNG_SR_CEIS	BIT(5)
+#define RNG_SR_SECS	BIT(2)
+#define RNG_SR_DRDY	BIT(0)
 
-#define RNG_DR 0x08
+#define RNG_DR		0x08
+
+struct stm32_rng_data {
+	bool has_cond_reset;
+};
 
 struct stm32_rng_plat {
 	fdt_addr_t base;
 	struct clk clk;
 	struct reset_ctl rst;
+	const struct stm32_rng_data *data;
 };
 
 static int stm32_rng_read(struct udevice *dev, void *data, size_t len)
@@ -83,18 +89,36 @@ static int stm32_rng_read(struct udevice *dev, void *data, size_t len)
 static int stm32_rng_init(struct stm32_rng_plat *pdata)
 {
 	int err;
+	u32 cr, sr;
 
 	err = clk_enable(&pdata->clk);
 	if (err)
 		return err;
 
+	cr = readl(pdata->base + RNG_CR);
+
 	/* Disable CED */
-	writel(RNG_CR_RNGEN | RNG_CR_CED, pdata->base + RNG_CR);
+	cr |= RNG_CR_CED;
+	if (pdata->data->has_cond_reset) {
+		cr |= RNG_CR_CONDRST;
+		writel(cr, pdata->base + RNG_CR);
+		cr &= ~RNG_CR_CONDRST;
+		writel(cr, pdata->base + RNG_CR);
+		err = readl_poll_timeout(pdata->base + RNG_CR, cr,
+					 (!(cr & RNG_CR_CONDRST)), 10000);
+		if (err)
+			return err;
+	}
 
 	/* clear error indicators */
 	writel(0, pdata->base + RNG_SR);
 
-	return 0;
+	cr |= RNG_CR_RNGEN;
+	writel(cr, pdata->base + RNG_CR);
+
+	err = readl_poll_timeout(pdata->base + RNG_SR, sr,
+				 sr & RNG_SR_DRDY, 10000);
+	return err;
 }
 
 static int stm32_rng_cleanup(struct stm32_rng_plat *pdata)
@@ -108,6 +132,8 @@ static int stm32_rng_probe(struct udevice *dev)
 {
 	struct stm32_rng_plat *pdata = dev_get_plat(dev);
 
+	pdata->data = (struct stm32_rng_data *)dev_get_driver_data(dev);
+
 	reset_assert(&pdata->rst);
 	udelay(20);
 	reset_deassert(&pdata->rst);
@@ -146,10 +172,17 @@ static const struct dm_rng_ops stm32_rng_ops = {
 	.read = stm32_rng_read,
 };
 
+static const struct stm32_rng_data stm32mp13_rng_data = {
+	.has_cond_reset = true,
+};
+
+static const struct stm32_rng_data stm32_rng_data = {
+	.has_cond_reset = false,
+};
+
 static const struct udevice_id stm32_rng_match[] = {
-	{
-		.compatible = "st,stm32-rng",
-	},
+	{.compatible = "st,stm32mp13-rng", .data = (ulong)&stm32mp13_rng_data},
+	{.compatible = "st,stm32-rng", .data = (ulong)&stm32_rng_data},
 	{},
 };
 
-- 
2.25.1

[PATCH v2 03/10] stm32mp: add support of STM32MP13x Rev.Y

[Patrick Delaunay]

Add support of STM32MP13x Rev.Y for the Silicon revision REV_ID = 0x1003.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---

Changes in v2:
- fix value of CPU_REV1_2 = 0x1003, because minor version in REV_ID
  is bitfield at SoC level (0 = 0, 1 = 1, 2 = 3, 3 = 7, 4 =F, ....)

 arch/arm/mach-stm32mp/include/mach/sys_proto.h | 1 +
 arch/arm/mach-stm32mp/stm32mp13x.c             | 3 +++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm/mach-stm32mp/include/mach/sys_proto.h b/arch/arm/mach-stm32mp/include/mach/sys_proto.h
index 4b564e86dc5..f19a70e53e0 100644
--- a/arch/arm/mach-stm32mp/include/mach/sys_proto.h
+++ b/arch/arm/mach-stm32mp/include/mach/sys_proto.h
@@ -41,6 +41,7 @@ u32 get_cpu_dev(void);
 
 #define CPU_REV1	0x1000
 #define CPU_REV1_1	0x1001
+#define CPU_REV1_2	0x1003
 #define CPU_REV2	0x2000
 #define CPU_REV2_1	0x2001
 
diff --git a/arch/arm/mach-stm32mp/stm32mp13x.c b/arch/arm/mach-stm32mp/stm32mp13x.c
index bd3f24c349a..845d973ad1b 100644
--- a/arch/arm/mach-stm32mp/stm32mp13x.c
+++ b/arch/arm/mach-stm32mp/stm32mp13x.c
@@ -126,6 +126,9 @@ void get_soc_name(char name[SOC_NAME_SIZE])
 	case CPU_REV1_1:
 		cpu_r = "Z";
 		break;
+	case CPU_REV1_2:
+		cpu_r = "Y";
+		break;
 	default:
 		cpu_r = "?";
 		break;
-- 
2.25.1

[PATCH v2 04/10] ARM: dts: stm32mp13: alignment with v5.19

[Patrick Delaunay]

Device tree alignment with Linux kernel v5.19-rc1 with:
- ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
- ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
- ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131
- ARM: dts: stm32: enable RTC support on stm32mp135f-dk
- ARM: dts: stm32: add RTC node on stm32mp131
- ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---

(no changes since v1)

 arch/arm/dts/stm32mp131.dtsi    | 19 ++++++++++++++++++-
 arch/arm/dts/stm32mp135f-dk.dts | 29 +++++++++++++++++++++++++++++
 2 files changed, 47 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi
index 950e172e455..a30989f287e 100644
--- a/arch/arm/dts/stm32mp131.dtsi
+++ b/arch/arm/dts/stm32mp131.dtsi
@@ -75,6 +75,12 @@
 			compatible = "fixed-clock";
 			clock-frequency = <99000000>;
 		};
+
+		clk_rtc_k: clk-rtc-k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
 	};
 
 	intc: interrupt-controller@a0021000 {
@@ -218,6 +224,15 @@
 			status = "disabled";
 		};
 
+		rtc: rtc@5c004000 {
+			compatible = "st,stm32mp1-rtc";
+			reg = <0x5c004000 0x400>;
+			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_pclk4>, <&clk_rtc_k>;
+			clock-names = "pclk", "rtc_ck";
+			status = "disabled";
+		};
+
 		bsec: efuse@5c005000 {
 			compatible = "st,stm32mp13-bsec";
 			reg = <0x5c005000 0x400>;
@@ -239,11 +254,13 @@
 		 * Break node order to solve dependency probe issue between
 		 * pinctrl and exti.
 		 */
-		pinctrl: pin-controller@50002000 {
+		pinctrl: pinctrl@50002000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "st,stm32mp135-pinctrl";
 			ranges = <0 0x50002000 0x8400>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
 			pins-are-numbered;
 
 			gpioa: gpio@50002000 {
diff --git a/arch/arm/dts/stm32mp135f-dk.dts b/arch/arm/dts/stm32mp135f-dk.dts
index ee100d108ea..09d6226d598 100644
--- a/arch/arm/dts/stm32mp135f-dk.dts
+++ b/arch/arm/dts/stm32mp135f-dk.dts
@@ -6,6 +6,9 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include "stm32mp135.dtsi"
 #include "stm32mp13xf.dtsi"
 #include "stm32mp13-pinctrl.dtsi"
@@ -23,6 +26,28 @@
 		reg = <0xc0000000 0x20000000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pa13 {
+			label = "User-PA13";
+			linux,code = <BTN_1>;
+			gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
 	vdd_sd: vdd-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_sd";
@@ -37,6 +62,10 @@
 	status = "okay";
 };
 
+&rtc {
+	status = "okay";
+};
+
 &sdmmc1 {
 	pinctrl-names = "default", "opendrain", "sleep";
 	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
-- 
2.25.1

[PATCH v2 05/10] ARM: dts: stm32mp13: activate led on STM32MP13F-DK

[Patrick Delaunay]

Activate the led managed in stm32mp1 board for U-Boot indication
in STM32MP13F-DK device tree.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---

(no changes since v1)

 arch/arm/dts/stm32mp135f-dk-u-boot.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi b/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi
index dfe5bbb2e34..cbe4eb56083 100644
--- a/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi
@@ -11,8 +11,18 @@
 	};
 
 	config {
+		u-boot,boot-led = "led-blue";
+		u-boot,error-led = "led-red";
 		u-boot,mmc-env-partition = "u-boot-env";
 	};
+
+	leds {
+		led-red {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
 };
 
 &uart4 {
-- 
2.25.1

[PATCH v2 06/10] configs: stm32mp13: Add support for baudrates higher than 115200

[Patrick Delaunay]

On STM32MP13x STMicroelectronics boards, the UART can reliably go up to
4000000 bauds when connected to the external ST-LINKV3.

This patch adds the support of higher baudrates on STMicroelectronics
STM32MP13x boards with ST-LINKV3.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---

(no changes since v1)

 include/configs/stm32mp13_st_common.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/include/configs/stm32mp13_st_common.h b/include/configs/stm32mp13_st_common.h
index ec64b12f7ab..c51022b40d2 100644
--- a/include/configs/stm32mp13_st_common.h
+++ b/include/configs/stm32mp13_st_common.h
@@ -14,4 +14,9 @@
 
 #include <configs/stm32mp13_common.h>
 
+/* uart with on-board st-link */
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, \
+					 230400, 460800, 921600, \
+					 1000000, 2000000, 4000000}
+
 #endif
-- 
2.25.1

[PATCH v2 07/10] configs: stm32mp13: activate RNG support

[Patrick Delaunay]

Activate the RNG driver provided by OP-TEE.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---

(no changes since v1)

 configs/stm32mp13_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
index b5dcec78f51..3fa1642b2e4 100644
--- a/configs/stm32mp13_defconfig
+++ b/configs/stm32mp13_defconfig
@@ -27,6 +27,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
+CONFIG_CMD_RNG=y
 CONFIG_CMD_TIMER=y
 CONFIG_CMD_LOG=y
 CONFIG_OF_LIVE=y
@@ -44,6 +45,8 @@ CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_DM_REGULATOR_SCMI=y
 CONFIG_RESET_SCMI=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_OPTEE=y
 CONFIG_SERIAL_RX_BUFFER=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_TEE=y
-- 
2.25.1

[PATCH v2 08/10] configs: stm32mp13: activate RTC support

[Patrick Delaunay]

Activate the RTC driver in STM32MP13x config.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---

(no changes since v1)

 configs/stm32mp13_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
index 3fa1642b2e4..9b0c5a36b04 100644
--- a/configs/stm32mp13_defconfig
+++ b/configs/stm32mp13_defconfig
@@ -47,6 +47,8 @@ CONFIG_DM_REGULATOR_SCMI=y
 CONFIG_RESET_SCMI=y
 CONFIG_DM_RNG=y
 CONFIG_RNG_OPTEE=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_STM32=y
 CONFIG_SERIAL_RX_BUFFER=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_TEE=y
-- 
2.25.1

[PATCH v2 09/10] configs: stm32mp13: activate I2C support

[Patrick Delaunay]

Activate the I2C driver in STM32MP13x config.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---

(no changes since v1)

 configs/stm32mp13_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
index 9b0c5a36b04..f58c73b7c79 100644
--- a/configs/stm32mp13_defconfig
+++ b/configs/stm32mp13_defconfig
@@ -24,6 +24,7 @@ CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
@@ -37,6 +38,8 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SYS_MMC_ENV_DEV=-1
 CONFIG_CLK_SCMI=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_STM32F7=y
 CONFIG_STM32_SDMMC2=y
 CONFIG_DM_ETH=y
 CONFIG_PINCONF=y
-- 
2.25.1

[PATCH v2 10/10] configs: stm32mp13: activate some command

[Patrick Delaunay]

Activate useful commands in STM32MP13x config, already activated in
stm32mp15_defconfig.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---

(no changes since v1)

 configs/stm32mp13_defconfig | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
index f58c73b7c79..f94798a9ff8 100644
--- a/configs/stm32mp13_defconfig
+++ b/configs/stm32mp13_defconfig
@@ -20,17 +20,25 @@ CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
 CONFIG_SYS_PROMPT="STM32MP> "
 CONFIG_CMD_ADTIMG=y
 CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_NVEDIT_EFI=y
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_UNZIP=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
+CONFIG_CMD_LSBLK=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_EFIDEBUG=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_RNG=y
 CONFIG_CMD_TIMER=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_LOG=y
+CONFIG_CMD_UBI=y
 CONFIG_OF_LIVE=y
 CONFIG_ENV_IS_NOWHERE=y
 CONFIG_ENV_IS_IN_MMC=y
@@ -38,9 +46,16 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SYS_MMC_ENV_DEV=-1
 CONFIG_CLK_SCMI=y
+CONFIG_GPIO_HOG=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_STM32F7=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_STM32_SDMMC2=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_SYS_MTDPARTS_RUNTIME=y
 CONFIG_DM_ETH=y
 CONFIG_PINCONF=y
 CONFIG_DM_REGULATOR=y
@@ -58,6 +73,7 @@ CONFIG_TEE=y
 CONFIG_OPTEE=y
 # CONFIG_OPTEE_TA_AVB is not set
 CONFIG_ERRNO_STR=y
+CONFIG_FDT_FIXUP_PARTITIONS=y
 # CONFIG_LMB_USE_MAX_REGIONS is not set
 CONFIG_LMB_MEMORY_REGIONS=2
 CONFIG_LMB_RESERVED_REGIONS=16
-- 
2.25.1

Re: [PATCH v2 01/10] i2c: stm32: add support for the st, stm32mp13 SOC

[Patrice CHOTARD]

Hi Patrick

On 6/30/22 10:20, Patrick Delaunay wrote:
> The stm32mp13 soc differs from the stm32mp15 in terms of
> clear register offset for controlling the FMP (Fast Mode Plus).
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
> (no changes since v1)
> 
>  drivers/i2c/stm32f7_i2c.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c
> index c6ae65badb7..bf2a6c9b4bd 100644
> --- a/drivers/i2c/stm32f7_i2c.c
> +++ b/drivers/i2c/stm32f7_i2c.c
> @@ -267,6 +267,10 @@ static const struct stm32_i2c_data stm32mp15_data = {
>  	.fmp_clr_offset = 0x40,
>  };
>  
> +static const struct stm32_i2c_data stm32mp13_data = {
> +	.fmp_clr_offset = 0x4,
> +};
> +
>  static int stm32_i2c_check_device_busy(struct stm32_i2c_priv *i2c_priv)
>  {
>  	struct stm32_i2c_regs *regs = i2c_priv->regs;
> @@ -957,6 +961,7 @@ static const struct dm_i2c_ops stm32_i2c_ops = {
>  static const struct udevice_id stm32_i2c_of_match[] = {
>  	{ .compatible = "st,stm32f7-i2c", .data = (ulong)&stm32f7_data },
>  	{ .compatible = "st,stm32mp15-i2c", .data = (ulong)&stm32mp15_data },
> +	{ .compatible = "st,stm32mp13-i2c", .data = (ulong)&stm32mp13_data },
>  	{}
>  };
>  
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

Re: [PATCH v2 02/10] rng: stm32mp1_rng: add conditional reset feature for STM32MP13x

[Patrice CHOTARD]

Hi Patrick

On 6/30/22 10:20, Patrick Delaunay wrote:
> From: Lionel Debieve <lionel.debieve@foss.st.com>
> 
> New IP adds a conditional reset that impact the clock
> error management. It is now linked to a new compatible.
> 
> Signed-off-by: Lionel Debieve <lionel.debieve@foss.st.com>
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
> (no changes since v1)
> 
>  drivers/rng/stm32mp1_rng.c | 61 +++++++++++++++++++++++++++++---------
>  1 file changed, 47 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/rng/stm32mp1_rng.c b/drivers/rng/stm32mp1_rng.c
> index 8ea00e3e890..89da78c6c8b 100644
> --- a/drivers/rng/stm32mp1_rng.c
> +++ b/drivers/rng/stm32mp1_rng.c
> @@ -18,22 +18,28 @@
>  #include <linux/iopoll.h>
>  #include <linux/kernel.h>
>  
> -#define RNG_CR 0x00
> -#define RNG_CR_RNGEN BIT(2)
> -#define RNG_CR_CED BIT(5)
> +#define RNG_CR		0x00
> +#define RNG_CR_RNGEN	BIT(2)
> +#define RNG_CR_CED	BIT(5)
> +#define RNG_CR_CONDRST	BIT(30)
>  
> -#define RNG_SR 0x04
> -#define RNG_SR_SEIS BIT(6)
> -#define RNG_SR_CEIS BIT(5)
> -#define RNG_SR_SECS BIT(2)
> -#define RNG_SR_DRDY BIT(0)
> +#define RNG_SR		0x04
> +#define RNG_SR_SEIS	BIT(6)
> +#define RNG_SR_CEIS	BIT(5)
> +#define RNG_SR_SECS	BIT(2)
> +#define RNG_SR_DRDY	BIT(0)
>  
> -#define RNG_DR 0x08
> +#define RNG_DR		0x08
> +
> +struct stm32_rng_data {
> +	bool has_cond_reset;
> +};
>  
>  struct stm32_rng_plat {
>  	fdt_addr_t base;
>  	struct clk clk;
>  	struct reset_ctl rst;
> +	const struct stm32_rng_data *data;
>  };
>  
>  static int stm32_rng_read(struct udevice *dev, void *data, size_t len)
> @@ -83,18 +89,36 @@ static int stm32_rng_read(struct udevice *dev, void *data, size_t len)
>  static int stm32_rng_init(struct stm32_rng_plat *pdata)
>  {
>  	int err;
> +	u32 cr, sr;
>  
>  	err = clk_enable(&pdata->clk);
>  	if (err)
>  		return err;
>  
> +	cr = readl(pdata->base + RNG_CR);
> +
>  	/* Disable CED */
> -	writel(RNG_CR_RNGEN | RNG_CR_CED, pdata->base + RNG_CR);
> +	cr |= RNG_CR_CED;
> +	if (pdata->data->has_cond_reset) {
> +		cr |= RNG_CR_CONDRST;
> +		writel(cr, pdata->base + RNG_CR);
> +		cr &= ~RNG_CR_CONDRST;
> +		writel(cr, pdata->base + RNG_CR);
> +		err = readl_poll_timeout(pdata->base + RNG_CR, cr,
> +					 (!(cr & RNG_CR_CONDRST)), 10000);
> +		if (err)
> +			return err;
> +	}
>  
>  	/* clear error indicators */
>  	writel(0, pdata->base + RNG_SR);
>  
> -	return 0;
> +	cr |= RNG_CR_RNGEN;
> +	writel(cr, pdata->base + RNG_CR);
> +
> +	err = readl_poll_timeout(pdata->base + RNG_SR, sr,
> +				 sr & RNG_SR_DRDY, 10000);
> +	return err;
>  }
>  
>  static int stm32_rng_cleanup(struct stm32_rng_plat *pdata)
> @@ -108,6 +132,8 @@ static int stm32_rng_probe(struct udevice *dev)
>  {
>  	struct stm32_rng_plat *pdata = dev_get_plat(dev);
>  
> +	pdata->data = (struct stm32_rng_data *)dev_get_driver_data(dev);
> +
>  	reset_assert(&pdata->rst);
>  	udelay(20);
>  	reset_deassert(&pdata->rst);
> @@ -146,10 +172,17 @@ static const struct dm_rng_ops stm32_rng_ops = {
>  	.read = stm32_rng_read,
>  };
>  
> +static const struct stm32_rng_data stm32mp13_rng_data = {
> +	.has_cond_reset = true,
> +};
> +
> +static const struct stm32_rng_data stm32_rng_data = {
> +	.has_cond_reset = false,
> +};
> +
>  static const struct udevice_id stm32_rng_match[] = {
> -	{
> -		.compatible = "st,stm32-rng",
> -	},
> +	{.compatible = "st,stm32mp13-rng", .data = (ulong)&stm32mp13_rng_data},
> +	{.compatible = "st,stm32-rng", .data = (ulong)&stm32_rng_data},
>  	{},
>  };
>  
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

Re: [PATCH v2 03/10] stm32mp: add support of STM32MP13x Rev.Y

[Patrice CHOTARD]

Hi Patrick

On 6/30/22 10:20, Patrick Delaunay wrote:
> Add support of STM32MP13x Rev.Y for the Silicon revision REV_ID = 0x1003.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
> Changes in v2:
> - fix value of CPU_REV1_2 = 0x1003, because minor version in REV_ID
>   is bitfield at SoC level (0 = 0, 1 = 1, 2 = 3, 3 = 7, 4 =F, ....)
> 
>  arch/arm/mach-stm32mp/include/mach/sys_proto.h | 1 +
>  arch/arm/mach-stm32mp/stm32mp13x.c             | 3 +++
>  2 files changed, 4 insertions(+)
> 
> diff --git a/arch/arm/mach-stm32mp/include/mach/sys_proto.h b/arch/arm/mach-stm32mp/include/mach/sys_proto.h
> index 4b564e86dc5..f19a70e53e0 100644
> --- a/arch/arm/mach-stm32mp/include/mach/sys_proto.h
> +++ b/arch/arm/mach-stm32mp/include/mach/sys_proto.h
> @@ -41,6 +41,7 @@ u32 get_cpu_dev(void);
>  
>  #define CPU_REV1	0x1000
>  #define CPU_REV1_1	0x1001
> +#define CPU_REV1_2	0x1003
>  #define CPU_REV2	0x2000
>  #define CPU_REV2_1	0x2001
>  
> diff --git a/arch/arm/mach-stm32mp/stm32mp13x.c b/arch/arm/mach-stm32mp/stm32mp13x.c
> index bd3f24c349a..845d973ad1b 100644
> --- a/arch/arm/mach-stm32mp/stm32mp13x.c
> +++ b/arch/arm/mach-stm32mp/stm32mp13x.c
> @@ -126,6 +126,9 @@ void get_soc_name(char name[SOC_NAME_SIZE])
>  	case CPU_REV1_1:
>  		cpu_r = "Z";
>  		break;
> +	case CPU_REV1_2:
> +		cpu_r = "Y";
> +		break;
>  	default:
>  		cpu_r = "?";
>  		break;
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

Re: [PATCH v2 04/10] ARM: dts: stm32mp13: alignment with v5.19

[Patrice CHOTARD]

Hi Patrick

On 6/30/22 10:20, Patrick Delaunay wrote:
> Device tree alignment with Linux kernel v5.19-rc1 with:
> - ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
> - ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
> - ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131
> - ARM: dts: stm32: enable RTC support on stm32mp135f-dk
> - ARM: dts: stm32: add RTC node on stm32mp131
> - ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
> (no changes since v1)
> 
>  arch/arm/dts/stm32mp131.dtsi    | 19 ++++++++++++++++++-
>  arch/arm/dts/stm32mp135f-dk.dts | 29 +++++++++++++++++++++++++++++
>  2 files changed, 47 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi
> index 950e172e455..a30989f287e 100644
> --- a/arch/arm/dts/stm32mp131.dtsi
> +++ b/arch/arm/dts/stm32mp131.dtsi
> @@ -75,6 +75,12 @@
>  			compatible = "fixed-clock";
>  			clock-frequency = <99000000>;
>  		};
> +
> +		clk_rtc_k: clk-rtc-k {
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-frequency = <32768>;
> +		};
>  	};
>  
>  	intc: interrupt-controller@a0021000 {
> @@ -218,6 +224,15 @@
>  			status = "disabled";
>  		};
>  
> +		rtc: rtc@5c004000 {
> +			compatible = "st,stm32mp1-rtc";
> +			reg = <0x5c004000 0x400>;
> +			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clk_pclk4>, <&clk_rtc_k>;
> +			clock-names = "pclk", "rtc_ck";
> +			status = "disabled";
> +		};
> +
>  		bsec: efuse@5c005000 {
>  			compatible = "st,stm32mp13-bsec";
>  			reg = <0x5c005000 0x400>;
> @@ -239,11 +254,13 @@
>  		 * Break node order to solve dependency probe issue between
>  		 * pinctrl and exti.
>  		 */
> -		pinctrl: pin-controller@50002000 {
> +		pinctrl: pinctrl@50002000 {
>  			#address-cells = <1>;
>  			#size-cells = <1>;
>  			compatible = "st,stm32mp135-pinctrl";
>  			ranges = <0 0x50002000 0x8400>;
> +			interrupt-parent = <&exti>;
> +			st,syscfg = <&exti 0x60 0xff>;
>  			pins-are-numbered;
>  
>  			gpioa: gpio@50002000 {
> diff --git a/arch/arm/dts/stm32mp135f-dk.dts b/arch/arm/dts/stm32mp135f-dk.dts
> index ee100d108ea..09d6226d598 100644
> --- a/arch/arm/dts/stm32mp135f-dk.dts
> +++ b/arch/arm/dts/stm32mp135f-dk.dts
> @@ -6,6 +6,9 @@
>  
>  /dts-v1/;
>  
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
>  #include "stm32mp135.dtsi"
>  #include "stm32mp13xf.dtsi"
>  #include "stm32mp13-pinctrl.dtsi"
> @@ -23,6 +26,28 @@
>  		reg = <0xc0000000 0x20000000>;
>  	};
>  
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		user-pa13 {
> +			label = "User-PA13";
> +			linux,code = <BTN_1>;
> +			gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led-blue {
> +			function = LED_FUNCTION_HEARTBEAT;
> +			color = <LED_COLOR_ID_BLUE>;
> +			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "heartbeat";
> +			default-state = "off";
> +		};
> +	};
> +
>  	vdd_sd: vdd-sd {
>  		compatible = "regulator-fixed";
>  		regulator-name = "vdd_sd";
> @@ -37,6 +62,10 @@
>  	status = "okay";
>  };
>  
> +&rtc {
> +	status = "okay";
> +};
> +
>  &sdmmc1 {
>  	pinctrl-names = "default", "opendrain", "sleep";
>  	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;


Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

Re: [PATCH v2 05/10] ARM: dts: stm32mp13: activate led on STM32MP13F-DK

[Patrice CHOTARD]

Hi Patrick

On 6/30/22 10:20, Patrick Delaunay wrote:
> Activate the led managed in stm32mp1 board for U-Boot indication
> in STM32MP13F-DK device tree.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
> (no changes since v1)
> 
>  arch/arm/dts/stm32mp135f-dk-u-boot.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi b/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi
> index dfe5bbb2e34..cbe4eb56083 100644
> --- a/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi
> +++ b/arch/arm/dts/stm32mp135f-dk-u-boot.dtsi
> @@ -11,8 +11,18 @@
>  	};
>  
>  	config {
> +		u-boot,boot-led = "led-blue";
> +		u-boot,error-led = "led-red";
>  		u-boot,mmc-env-partition = "u-boot-env";
>  	};
> +
> +	leds {
> +		led-red {
> +			color = <LED_COLOR_ID_RED>;
> +			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
> +			default-state = "off";
> +		};
> +	};
>  };
>  
>  &uart4 {

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

Re: [PATCH v2 06/10] configs: stm32mp13: Add support for baudrates higher than 115200

[Patrice CHOTARD]

Hi Patrick

On 6/30/22 10:20, Patrick Delaunay wrote:
> On STM32MP13x STMicroelectronics boards, the UART can reliably go up to
> 4000000 bauds when connected to the external ST-LINKV3.
> 
> This patch adds the support of higher baudrates on STMicroelectronics
> STM32MP13x boards with ST-LINKV3.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
> (no changes since v1)
> 
>  include/configs/stm32mp13_st_common.h | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/include/configs/stm32mp13_st_common.h b/include/configs/stm32mp13_st_common.h
> index ec64b12f7ab..c51022b40d2 100644
> --- a/include/configs/stm32mp13_st_common.h
> +++ b/include/configs/stm32mp13_st_common.h
> @@ -14,4 +14,9 @@
>  
>  #include <configs/stm32mp13_common.h>
>  
> +/* uart with on-board st-link */
> +#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, \
> +					 230400, 460800, 921600, \
> +					 1000000, 2000000, 4000000}
> +
>  #endif

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

Re: [PATCH v2 07/10] configs: stm32mp13: activate RNG support

[Patrice CHOTARD]

Hi PAtrick

On 6/30/22 10:20, Patrick Delaunay wrote:
> Activate the RNG driver provided by OP-TEE.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
> (no changes since v1)
> 
>  configs/stm32mp13_defconfig | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
> index b5dcec78f51..3fa1642b2e4 100644
> --- a/configs/stm32mp13_defconfig
> +++ b/configs/stm32mp13_defconfig
> @@ -27,6 +27,7 @@ CONFIG_CMD_GPIO=y
>  CONFIG_CMD_MMC=y
>  CONFIG_CMD_CACHE=y
>  CONFIG_CMD_TIME=y
> +CONFIG_CMD_RNG=y
>  CONFIG_CMD_TIMER=y
>  CONFIG_CMD_LOG=y
>  CONFIG_OF_LIVE=y
> @@ -44,6 +45,8 @@ CONFIG_DM_REGULATOR_FIXED=y
>  CONFIG_DM_REGULATOR_GPIO=y
>  CONFIG_DM_REGULATOR_SCMI=y
>  CONFIG_RESET_SCMI=y
> +CONFIG_DM_RNG=y
> +CONFIG_RNG_OPTEE=y
>  CONFIG_SERIAL_RX_BUFFER=y
>  CONFIG_SYSRESET_PSCI=y
>  CONFIG_TEE=y
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

Re: [PATCH v2 08/10] configs: stm32mp13: activate RTC support

[Patrice CHOTARD]

Hi Patrick

On 6/30/22 10:20, Patrick Delaunay wrote:
> Activate the RTC driver in STM32MP13x config.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
> (no changes since v1)
> 
>  configs/stm32mp13_defconfig | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
> index 3fa1642b2e4..9b0c5a36b04 100644
> --- a/configs/stm32mp13_defconfig
> +++ b/configs/stm32mp13_defconfig
> @@ -47,6 +47,8 @@ CONFIG_DM_REGULATOR_SCMI=y
>  CONFIG_RESET_SCMI=y
>  CONFIG_DM_RNG=y
>  CONFIG_RNG_OPTEE=y
> +CONFIG_DM_RTC=y
> +CONFIG_RTC_STM32=y
>  CONFIG_SERIAL_RX_BUFFER=y
>  CONFIG_SYSRESET_PSCI=y
>  CONFIG_TEE=y

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

Re: [PATCH v2 09/10] configs: stm32mp13: activate I2C support

[Patrice CHOTARD]

Hi Patrick

On 6/30/22 10:20, Patrick Delaunay wrote:
> Activate the I2C driver in STM32MP13x config.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
> (no changes since v1)
> 
>  configs/stm32mp13_defconfig | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
> index 9b0c5a36b04..f58c73b7c79 100644
> --- a/configs/stm32mp13_defconfig
> +++ b/configs/stm32mp13_defconfig
> @@ -24,6 +24,7 @@ CONFIG_CMD_MEMINFO=y
>  CONFIG_CMD_MEMTEST=y
>  CONFIG_CMD_CLK=y
>  CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
>  CONFIG_CMD_CACHE=y
>  CONFIG_CMD_TIME=y
> @@ -37,6 +38,8 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
>  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>  CONFIG_SYS_MMC_ENV_DEV=-1
>  CONFIG_CLK_SCMI=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_STM32F7=y
>  CONFIG_STM32_SDMMC2=y
>  CONFIG_DM_ETH=y
>  CONFIG_PINCONF=y
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

Re: [PATCH v2 10/10] configs: stm32mp13: activate some command

[Patrice CHOTARD]

Hi Patrick

On 6/30/22 10:20, Patrick Delaunay wrote:
> Activate useful commands in STM32MP13x config, already activated in
> stm32mp15_defconfig.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
> (no changes since v1)
> 
>  configs/stm32mp13_defconfig | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/configs/stm32mp13_defconfig b/configs/stm32mp13_defconfig
> index f58c73b7c79..f94798a9ff8 100644
> --- a/configs/stm32mp13_defconfig
> +++ b/configs/stm32mp13_defconfig
> @@ -20,17 +20,25 @@ CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
>  CONFIG_SYS_PROMPT="STM32MP> "
>  CONFIG_CMD_ADTIMG=y
>  CONFIG_CMD_ERASEENV=y
> +CONFIG_CMD_NVEDIT_EFI=y
>  CONFIG_CMD_MEMINFO=y
>  CONFIG_CMD_MEMTEST=y
> +CONFIG_CMD_UNZIP=y
>  CONFIG_CMD_CLK=y
>  CONFIG_CMD_GPIO=y
>  CONFIG_CMD_I2C=y
> +CONFIG_CMD_LSBLK=y
>  CONFIG_CMD_MMC=y
>  CONFIG_CMD_CACHE=y
> +CONFIG_CMD_EFIDEBUG=y
>  CONFIG_CMD_TIME=y
>  CONFIG_CMD_RNG=y
>  CONFIG_CMD_TIMER=y
> +CONFIG_CMD_REGULATOR=y
> +CONFIG_CMD_EXT4_WRITE=y
> +CONFIG_CMD_MTDPARTS=y
>  CONFIG_CMD_LOG=y
> +CONFIG_CMD_UBI=y
>  CONFIG_OF_LIVE=y
>  CONFIG_ENV_IS_NOWHERE=y
>  CONFIG_ENV_IS_IN_MMC=y
> @@ -38,9 +46,16 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
>  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>  CONFIG_SYS_MMC_ENV_DEV=-1
>  CONFIG_CLK_SCMI=y
> +CONFIG_GPIO_HOG=y
>  CONFIG_DM_I2C=y
>  CONFIG_SYS_I2C_STM32F7=y
> +CONFIG_LED=y
> +CONFIG_LED_GPIO=y
> +CONFIG_SUPPORT_EMMC_BOOT=y
>  CONFIG_STM32_SDMMC2=y
> +CONFIG_MTD=y
> +CONFIG_DM_MTD=y
> +CONFIG_SYS_MTDPARTS_RUNTIME=y
>  CONFIG_DM_ETH=y
>  CONFIG_PINCONF=y
>  CONFIG_DM_REGULATOR=y
> @@ -58,6 +73,7 @@ CONFIG_TEE=y
>  CONFIG_OPTEE=y
>  # CONFIG_OPTEE_TA_AVB is not set
>  CONFIG_ERRNO_STR=y
> +CONFIG_FDT_FIXUP_PARTITIONS=y
>  # CONFIG_LMB_USE_MAX_REGIONS is not set
>  CONFIG_LMB_MEMORY_REGIONS=2
>  CONFIG_LMB_RESERVED_REGIONS=16
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

Re: [PATCH v2 01/10] i2c: stm32: add support for the st, stm32mp13 SOC

[Patrick Delaunay]

On Thu, 30 Jun 2022 10:20:14 +0200, Patrick Delaunay wrote:
> The stm32mp13 soc differs from the stm32mp15 in terms of
> clear register offset for controlling the FMP (Fast Mode Plus).
> 
> 

Applied to stm32/master, thanks!

[01/10] i2c: stm32: add support for the st,stm32mp13 SOC
        commit: d4d01d0e9998ab1c000ae0d578d33801b31cb845
[02/10] rng: stm32mp1_rng: add conditional reset feature for STM32MP13x
        commit: 12e11aae2d96d4c437c4c068e440ab4b7f08ceb0
[03/10] stm32mp: add support of STM32MP13x Rev.Y
        commit: 50b371fd68afb3650fc285bca6ae88d639418a16
[04/10] ARM: dts: stm32mp13: alignment with v5.19
        commit: 12d5a0626cf11acc3c9a59c91d87657eef726fdc
[05/10] ARM: dts: stm32mp13: activate led on STM32MP13F-DK
        commit: 6d647676ead2caecade3a7145302e98bfbc436f9
[06/10] configs: stm32mp13: Add support for baudrates higher than 115200
        commit: eb67e63da4468195276c889a1866b43821128b25
[07/10] configs: stm32mp13: activate RNG support
        commit: 72d7a302f634029ef2874d864c294fd9bfc48739
[08/10] configs: stm32mp13: activate RTC support
        commit: 420f37a91faefcda64355805fbcb662cd0aac8e1
[09/10] configs: stm32mp13: activate I2C support
        commit: 33129f6130dc125582e09a03ec78afe53a1b27f3
[10/10] configs: stm32mp13: activate some command
        commit: 257d001cb5a3e3e3a582fddb37478dedb1764811

Best regards,
-- 
Patrick Delaunay <patrick.delaunay@foss.st.com>