From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 28A7AC433EF for ; Thu, 21 Jul 2022 13:30:43 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id B280B8419E; Thu, 21 Jul 2022 15:30:16 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=ziswiler.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Received: by phobos.denx.de (Postfix, from userid 109) id B44A7840EC; Thu, 21 Jul 2022 15:29:57 +0200 (CEST) Received: from mout.perfora.net (mout.perfora.net [74.208.4.197]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id C664684117 for ; Thu, 21 Jul 2022 15:28:37 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=ziswiler.com Authentication-Results: phobos.denx.de; spf=none smtp.mailfrom=marcel@ziswiler.com Received: from toolbox.int.toradex.com ([81.221.243.92]) by mrelay.perfora.net (mreueus002 [74.208.5.2]) with ESMTPSA (Nemesis) id 0M07WU-1nMhBR2Pd6-00uHTe; Thu, 21 Jul 2022 15:28:30 +0200 From: Marcel Ziswiler To: u-boot@lists.denx.de Cc: Marcel Ziswiler , Fabio Estevam , "NXP i.MX U-Boot Team" , Stefano Babic Subject: [PATCH v1 12/26] imx7s/d: synchronise device trees with linux Date: Thu, 21 Jul 2022 15:27:34 +0200 Message-Id: <20220721132748.1052244-13-marcel@ziswiler.com> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220721132748.1052244-1-marcel@ziswiler.com> References: <20220721132748.1052244-1-marcel@ziswiler.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Provags-ID: V03:K1:ub+y6Qk+qJbs1BxHrSvQWk6hfBvWqxgX0OXvE/uoTPoPRzsiwpg GICzYqUvpJ+SJfdSx0Pha3QH2lDQaShv/sM4QMMG3hni/ZtJweJNVg+Po85eb3i0Uver2mW 1X53xtNE32Qa2ygZTwovSXuVEcd3vthf5G5eAmVWJze0bn7FX1S9iHGYC87YgBEgMOqadn3 i4o7Ldq1aQjsudJU6kJRw== X-UI-Out-Filterresults: notjunk:1;V03:K0:4NhoVWrqtc0=:UDF2KJG9bpyTveN3fMNuMr 3hBRPnSi+5lN3TJtkfWiMecDZrdBSB6AMyLNpWn0cu8FD1MagVQrWJDJ7CJpD4uWLldIsusi+ 3MUvC1K8DXtXdIRfEm8OossROkDNDLHD61QybkZL7V3UUnWYKnjsGOfe2zQRwIMNTDmndfgN3 Vh6mDY6W4F4HPbIjdRnWLulE/3FVzk9x5/EtbhUl9Ck92GdMgYYpCUXxD6T23tHLBeb7aNX5m EqqqNv4Uld41rlhCYWRXnG0r2/5MVUQ0CcK66bS4J+eEF5Wg8Mt9ayNOpOOcVvPzruqRTglXY unzuxL/rxs86fBOd4PYCYGM+Kb5xtv5s1CMn0zPj/sC+YDq/nNaM79dJpG9bRuXIScDazLHw5 WQDEsMfqjVPx+EwfcunSDlSUx+ayTlFS1mhOpJqjGFvXcZH3jG5IwQmzK9YTzAPvmCYwyx1OA k7BePDUQ4HXdlijHyPxDrsiN6ilyW5DbJjxL4PTavoYekacDn51WEf+KADZ7zizoAb2t821Ee rqLmK5VYflP1iGu3dp3y8Fsx7mfQxwh5Z/gQyCUZVuWHwYcSQjbyxZHg10uTuBz2myPRnBxk8 U0rYfmui2iqyIm4oe619wsRal0EAgZwRRZ3xc7WuUuCp8Gnk0qXNMW7PIriWQe+mtvH1xWA/p NvVK5mHJivTNHEwZIQItZlfR2qEXiQ8sdG0sayauFAajjGAqMwT8daeJ8k+Ff0ywaIc3ksHfY K/gEVaeObvUBuWndg4YaEtDSQz5P0U7RjZXGo7tut8g9NkSDMS781AHg1Ho= X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.6 at phobos.denx.de X-Virus-Status: Clean From: Marcel Ziswiler Synchronise device tree with linux-next next-20220708. Signed-off-by: Marcel Ziswiler --- arch/arm/dts/imx7d-pico-hobbit.dts | 6 +- arch/arm/dts/imx7d-pico-pi.dts | 6 +- arch/arm/dts/imx7d-pico.dtsi | 103 +++++- arch/arm/dts/imx7d-pinfunc.h | 14 +- arch/arm/dts/imx7d-sdb.dts | 120 +++++- arch/arm/dts/imx7d-smegw01.dts | 297 ++++++++++++++- arch/arm/dts/imx7d.dtsi | 211 +++++++---- arch/arm/dts/imx7s-warp.dts | 70 +++- arch/arm/dts/imx7s.dtsi | 472 +++++++++++++++--------- include/dt-bindings/clock/imx7d-clock.h | 13 +- include/dt-bindings/power/imx7-power.h | 5 +- 11 files changed, 1021 insertions(+), 296 deletions(-) diff --git a/arch/arm/dts/imx7d-pico-hobbit.dts b/arch/arm/dts/imx7d-pico-hobbit.dts index 98604f0fa65..d917dc4f2f2 100644 --- a/arch/arm/dts/imx7d-pico-hobbit.dts +++ b/arch/arm/dts/imx7d-pico-hobbit.dts @@ -31,7 +31,7 @@ dailink_master: simple-audio-card,codec { sound-dai = <&sgtl5000>; - clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; }; }; }; @@ -41,7 +41,7 @@ #sound-dai-cells = <0>; reg = <0x0a>; compatible = "fsl,sgtl5000"; - clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_vref_1v8>; }; @@ -102,4 +102,4 @@ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 >; }; -}; \ No newline at end of file +}; diff --git a/arch/arm/dts/imx7d-pico-pi.dts b/arch/arm/dts/imx7d-pico-pi.dts index 66ca59045f3..f263e391e24 100644 --- a/arch/arm/dts/imx7d-pico-pi.dts +++ b/arch/arm/dts/imx7d-pico-pi.dts @@ -31,7 +31,7 @@ dailink_master: simple-audio-card,codec { sound-dai = <&sgtl5000>; - clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; }; }; }; @@ -41,7 +41,7 @@ #sound-dai-cells = <0>; reg = <0x0a>; compatible = "fsl,sgtl5000"; - clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_vref_1v8>; }; @@ -90,4 +90,4 @@ >; }; -}; \ No newline at end of file +}; diff --git a/arch/arm/dts/imx7d-pico.dtsi b/arch/arm/dts/imx7d-pico.dtsi index 57391fc0524..e0bff39e8d3 100644 --- a/arch/arm/dts/imx7d-pico.dtsi +++ b/arch/arm/dts/imx7d-pico.dtsi @@ -5,15 +5,44 @@ /dts-v1/; #include "imx7d.dtsi" -#include "imx7d-pico-u-boot.dtsi" / { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 50000 0>; + brightness-levels = <0 36 72 108 144 180 216 255>; + default-brightness-level = <6>; + }; + /* Will be filled by the bootloader */ memory@80000000 { device_type = "memory"; reg = <0x80000000 0>; }; + panel { + compatible = "vxt,vl050-8048nt-c01"; + backlight = <&backlight>; + power-supply = <®_lcd_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcdreg_on>; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_wlreg_on: regulator-wlreg_on { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -231,6 +260,18 @@ }; }; +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + &sai1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai1>; @@ -261,6 +302,8 @@ }; &pwm4 { /* Backlight */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; }; @@ -308,7 +351,7 @@ pinctrl-2 = <&pinctrl_usdhc1_200mhz>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; bus-width = <4>; - tuning-step = <2>; + fsl,tuning-step = <2>; vmmc-supply = <®_3p3v>; wakeup-source; no-1-8-v; @@ -389,7 +432,7 @@ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 - MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */ + MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */ >; }; @@ -414,21 +457,61 @@ >; }; + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x78 + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x78 + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x78 + MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 + >; + }; + pinctrl_pwm1: pwm1 { fsl,pins = < - MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f + MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f >; }; pinctrl_pwm2: pwm2 { fsl,pins = < - MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f + MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f >; }; pinctrl_pwm3: pwm3 { fsl,pins = < - MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f + MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f + >; + }; + + pinctrl_pwm4: pwm4grp{ + fsl,pins = < + MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x7f >; }; @@ -578,9 +661,15 @@ >; }; + pinctrl_reg_lcdreg_on: reglcdongrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x59 + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 >; }; -}; \ No newline at end of file +}; diff --git a/arch/arm/dts/imx7d-pinfunc.h b/arch/arm/dts/imx7d-pinfunc.h index f2493bc63da..69f2c1ec825 100644 --- a/arch/arm/dts/imx7d-pinfunc.h +++ b/arch/arm/dts/imx7d-pinfunc.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2014-2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __DTS_IMX7D_PINFUNC_H @@ -592,11 +588,11 @@ #define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x06FC 0x0 0x2 #define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0130 0x03A0 0x0000 0x0 0x0 #define MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x0130 0x03A0 0x05DC 0x1 0x0 -#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x0000 0x2 0x0 +#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x06C4 0x2 0x0 #define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3 0x0130 0x03A0 0x0000 0x3 0x0 #define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN 0x0130 0x03A0 0x0000 0x4 0x0 #define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x0130 0x03A0 0x0000 0x5 0x0 -#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0000 0x6 0x0 +#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0574 0x6 0x1 #define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0134 0x03A4 0x0000 0x0 0x0 #define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0134 0x03A4 0x06FC 0x0 0x3 #define MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x0134 0x03A4 0x05E0 0x1 0x0 @@ -1112,13 +1108,13 @@ #define MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 0x0250 0x04C0 0x0000 0x5 0x0 #define MX7D_PAD_ENET1_RGMII_TD3__CAAM_RNG_OSC_OBS 0x0250 0x04C0 0x0000 0x7 0x0 #define MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x0254 0x04C4 0x0000 0x0 0x0 -#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC 0x0254 0x04C4 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC 0x0254 0x04C4 0x06A4 0x2 0x1 #define MX7D_PAD_ENET1_RGMII_TX_CTL__GPT2_COMPARE1 0x0254 0x04C4 0x0000 0x3 0x0 #define MX7D_PAD_ENET1_RGMII_TX_CTL__EPDC_PWR_CTRL2 0x0254 0x04C4 0x0000 0x4 0x0 #define MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0254 0x04C4 0x0000 0x5 0x0 #define MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x0258 0x04C8 0x0000 0x0 0x0 #define MX7D_PAD_ENET1_RGMII_TXC__ENET1_TX_ER 0x0258 0x04C8 0x0000 0x1 0x0 -#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK 0x0258 0x04C8 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK 0x0258 0x04C8 0x069C 0x2 0x1 #define MX7D_PAD_ENET1_RGMII_TXC__GPT2_COMPARE2 0x0258 0x04C8 0x0000 0x3 0x0 #define MX7D_PAD_ENET1_RGMII_TXC__EPDC_PWR_CTRL3 0x0258 0x04C8 0x0000 0x4 0x0 #define MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x0258 0x04C8 0x0000 0x5 0x0 diff --git a/arch/arm/dts/imx7d-sdb.dts b/arch/arm/dts/imx7d-sdb.dts index ea2e58dd5aa..78f4224a9bf 100644 --- a/arch/arm/dts/imx7d-sdb.dts +++ b/arch/arm/dts/imx7d-sdb.dts @@ -1,7 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2017 NXP - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright (C) 2015 Freescale Semiconductor, Inc. /dts-v1/; @@ -46,7 +45,7 @@ pinctrl-0 = <&pinctrl_spi4>; gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; num-chipselects = <1>; #address-cells = <1>; #size-cells = <0>; @@ -147,6 +146,31 @@ }; }; }; + + sound { + compatible = "fsl,imx7d-evk-wm8960", + "fsl,imx-audio-wm8960"; + model = "wm8960-audio"; + audio-cpu = <&sai1>; + audio-codec = <&codec>; + hp-det-gpio = <&gpio2 28 GPIO_ACTIVE_HIGH>; + audio-routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Ext Spk", "SPK_LP", + "Ext Spk", "SPK_LN", + "Ext Spk", "SPK_RP", + "Ext Spk", "SPK_RN", + "LINPUT1", "AMIC", + "AMIC", "MICB"; + }; + + sound-hdmi { + compatible = "fsl,imx-audio-sii902x"; + model = "sii902x-audio"; + audio-cpu = <&sai3>; + hdmi-out; + }; }; &adc1 { @@ -163,17 +187,21 @@ cpu-supply = <&sw1a_reg>; }; +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; + &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; status = "okay"; tsc2046@0 { compatible = "ti,tsc2046"; reg = <0>; spi-max-frequency = <1000000>; - pinctrl-names ="default"; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc2046_pendown>; interrupt-parent = <&gpio2>; interrupts = <29 0>; @@ -357,9 +385,16 @@ codec: wm8960@1a { compatible = "wlf,wm8960"; reg = <0x1a>; - clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; clock-names = "mclk"; wlf,shared-lrclk; + wlf,hp-cfg = <2 2 3>; + wlf,gpio-cfg = <1 3>; + assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>, + <&clks IMX7D_PLL_AUDIO_POST_DIV>, + <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <884736000>, <12288000>; }; }; @@ -375,6 +410,41 @@ }; }; +&pcie { + reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +®_1p0d { + vin-supply = <&sw2_reg>; +}; + +®_1p2 { + vin-supply = <&sw2_reg>; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_PLL_AUDIO_POST_DIV>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <884736000>, <36864000>; + status = "okay"; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3 &pinctrl_sai3_mclk>; + assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>, + <&clks IMX7D_PLL_AUDIO_POST_DIV>, + <&clks IMX7D_SAI3_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <884736000>, <36864000>; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -534,6 +604,7 @@ pinctrl_hog: hoggrp { fsl,pins = < MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x59 /* headphone detect */ >; }; @@ -599,6 +670,33 @@ >; }; + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x1f + MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x1f + MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x30 + MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x1f + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x1f + MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x1f + MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x30 + >; + }; + pinctrl_spi4: spi4grp { fsl,pins = < MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59 @@ -760,4 +858,10 @@ MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 >; }; + + pinctrl_sai3_mclk: sai3grp_mclk { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK 0x1f + >; + }; }; diff --git a/arch/arm/dts/imx7d-smegw01.dts b/arch/arm/dts/imx7d-smegw01.dts index aefc654ad87..546268b8d0b 100644 --- a/arch/arm/dts/imx7d-smegw01.dts +++ b/arch/arm/dts/imx7d-smegw01.dts @@ -5,6 +5,7 @@ // Copyright (C) 2021 Fabio Estevam /dts-v1/; +#include #include "imx7d.dtsi" / { @@ -14,6 +15,9 @@ aliases { mmc0 = &usdhc1; mmc1 = &usdhc3; + mmc2 = &usdhc2; + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; }; chosen { @@ -24,6 +28,79 @@ device_type = "memory"; reg = <0x80000000 0x20000000>; }; + + reg_lte_on: regulator-lte-on { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lte_on>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "lte_on"; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_lte_nreset: regulator-lte-nreset { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lte_nreset>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "LTE_nReset"; + gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi>; + regulator-name = "wifi_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_wlan_rfkill: regulator-wlan-rfkill { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-2 = <&pinctrl_rfkill>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "wlan_rfkill"; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usbotg_vbus: regulator-usbotg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_pwr_gpio>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 05 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + status = "okay"; + + sram@0 { + compatible = "microchip,48l640"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <16000000>; + }; }; &fec1 { @@ -43,28 +120,109 @@ #size-cells = <0>; ethphy0: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; reg = <1>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + + ethphy1: ethernet-phy@2 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + reg = <2>; }; }; }; +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 =<&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + i2c_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + reg = <0x52>; + interrupt-parent = <&gpio2>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_lpsr>; + dr_mode = "otg"; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&usbotg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + dr_mode = "host"; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; no-1-8-v; - enable-sdio-wakeup; + wakeup-source; keep-power-in-suspend; status = "okay"; }; +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + non-removable; + vmmc-supply = <®_wifi>; + wakeup-source; + status = "okay"; +}; + &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -76,13 +234,10 @@ bus-width = <8>; fsl,tuning-step = <1>; non-removable; - cap-sd-highspeed; cap-mmc-highspeed; cap-mmc-hw-reset; mmc-hs200-1_8v; mmc-ddr-1_8v; - sd-uhs-ddr50; - sd-uhs-sdr104; status = "okay"; }; @@ -94,6 +249,15 @@ }; &iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x04 + MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x04 + MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x04 + MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x04 + >; + }; + pinctrl_enet1: enet1grp { fsl,pins = < MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5 @@ -102,7 +266,7 @@ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x5 MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x5 MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x5 - MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5 MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x5 MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x5 MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x5 @@ -113,6 +277,69 @@ >; }; + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x5 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x5 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x5 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x5 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x5 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x5 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x5 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x5 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x5 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x5 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x5 + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x5 + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x08 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x40000004 + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x40000004 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x0b0b0 + MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x0b0b0 + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x0b0b0 + >; + }; + + pinctrl_lte_on: lteongrp { + fsl,pins = < + MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x17059 + >; + }; + + pinctrl_lte_nreset: ltenresetgrp { + fsl,pins = < + MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x17059 + >; + }; + + pinctrl_rfkill: rfkillrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x17059 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x17059 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x74 @@ -120,7 +347,38 @@ >; }; - pinctrl_usdhc1: usdhc1 { + pinctrl_uart3: uart3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x7c + MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x74 + >; + }; + + pinctrl_usbotg1_lpsr: usbotg1 { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x04 + >; + }; + + pinctrl_usbotg1_pwr: usbotg1-pwr { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR 0x04 + >; + }; + + pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpio { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x04 + >; + }; + + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x04 + >; + }; + + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 MX7D_PAD_SD1_CMD__SD1_CMD 0x59 @@ -132,7 +390,19 @@ >; }; - pinctrl_usdhc3: usdhc3 { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 + MX7D_PAD_SD2_CD_B__SD2_CD_B 0x08 + >; + }; + + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5d MX7D_PAD_SD3_CLK__SD3_CLK 0x1d @@ -148,7 +418,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3_100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5e MX7D_PAD_SD3_CLK__SD3_CLK 0x1e @@ -164,7 +434,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3_200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x5f MX7D_PAD_SD3_CLK__SD3_CLK 0x0f @@ -179,6 +449,13 @@ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1f >; }; + + pinctrl_wifi: wifigrp { + fsl,pins = < + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x04 + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x04 + >; + }; }; &iomuxc_lpsr { diff --git a/arch/arm/dts/imx7d.dtsi b/arch/arm/dts/imx7d.dtsi index 75566c780a4..7ceb7c09f7a 100644 --- a/arch/arm/dts/imx7d.dtsi +++ b/arch/arm/dts/imx7d.dtsi @@ -1,60 +1,25 @@ -/* - * Copyright 2015 Freescale Semiconductor, Inc. - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Freescale Semiconductor, Inc. +// Copyright 2016 Toradex AG #include "imx7s.dtsi" +#include / { aliases { - ethernet1 = &fec2; + usb0 = &usbotg1; + usb1 = &usbotg2; + usb2 = &usbh; }; + cpus { cpu0: cpu@0 { - operating-points = < - /* KHz uV */ - 996000 1075000 - 792000 975000 - >; clock-frequency = <996000000>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + nvmem-cells = <&fuse_grade>; + nvmem-cell-names = "speed_grade"; }; cpu1: cpu@1 { @@ -62,10 +27,58 @@ device_type = "cpu"; reg = <1>; clock-frequency = <996000000>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + cpu-idle-states = <&cpu_sleep_wait>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&intc>; + interrupts = , + , + , + ; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-792000000 { + opp-hz = /bits/ 64 <792000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + opp-supported-hw = <0xd>, <0x7>; + opp-suspend; + }; + + opp-996000000 { + opp-hz = /bits/ 64 <996000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <150000>; + opp-supported-hw = <0xc>, <0x7>; + opp-suspend; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1225000>; + clock-latency-ns = <150000>; + opp-supported-hw = <0x8>, <0x3>; + opp-suspend; }; }; - soc { + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY2_CLK>; + clock-names = "main_clk"; + #phy-cells = <0>; + }; + + soc: soc { etm@3007d000 { compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0x3007d000 0x1000>; @@ -80,24 +93,77 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - etm1_out_port: endpoint { - remote-endpoint = <&ca_funnel_in_port1>; + out-ports { + port { + etm1_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port1>; + }; }; }; }; + + intc: interrupt-controller@31001000 { + compatible = "arm,cortex-a7-gic"; + interrupts = ; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + reg = <0x31001000 0x1000>, + <0x31002000 0x2000>, + <0x31004000 0x2000>, + <0x31006000 0x2000>; + }; + + pcie: pcie@33800000 { + compatible = "fsl,imx7d-pcie"; + reg = <0x33800000 0x4000>, + <0x4ff00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000>, /* downstream I/O */ + <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ + num-lanes = <1>; + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + /* + * Reference manual lists pci irqs incorrectly + * Real hardware ordering is same as imx6: D+MSI, C, B, A + */ + interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, + <&clks IMX7D_PCIE_PHY_ROOT_CLK>; + clock-names = "pcie", "pcie_bus", "pcie_phy"; + assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>, + <&clks IMX7D_PCIE_PHY_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + + fsl,max-link-speed = <2>; + power-domains = <&pgc_pcie_phy>; + resets = <&src IMX7_RESET_PCIEPHY>, + <&src IMX7_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; + fsl,imx7d-pcie-phy = <&pcie_phy>; + status = "disabled"; + }; }; }; &aips2 { - epdc: epdc@306f0000 { - compatible = "fsl,imx7d-epdc"; - interrupts = ; - reg = <0x306f0000 0x10000>; - clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_EPDC_PIXEL_ROOT_CLK>; - clock-names = "epdc_axi", "epdc_pix"; - epdc-ram = <&gpr 0x4 30>; - status = "disabled"; + pcie_phy: pcie-phy@306d0000 { + compatible = "fsl,imx7d-pcie-phy"; + reg = <0x306d0000 0x10000>; + status = "disabled"; }; }; @@ -119,36 +185,35 @@ reg = <0x30b20200 0x200>; }; - usbphynop2: usbphynop2 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_PHY2_CLK>; - clock-names = "main_clk"; - }; - fec2: ethernet@30bf0000 { compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; reg = <0x30bf0000 0x10000>; - interrupts = , + interrupt-names = "int0", "int1", "int2", "pps"; + interrupts = , + , , - ; - clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + ; + clocks = <&clks IMX7D_ENET2_IPG_ROOT_CLK>, <&clks IMX7D_ENET_AXI_ROOT_CLK>, <&clks IMX7D_ENET2_TIME_ROOT_CLK>, <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; + fsl,stop-mode = <&gpr 0x10 4>; status = "disabled"; }; }; -&ca_funnel_ports { +&ca_funnel_in_ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { reg = <1>; ca_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&etm1_out_port>; }; }; diff --git a/arch/arm/dts/imx7s-warp.dts b/arch/arm/dts/imx7s-warp.dts index f7ba2c0a24a..e8734d218b9 100644 --- a/arch/arm/dts/imx7s-warp.dts +++ b/arch/arm/dts/imx7s-warp.dts @@ -10,10 +10,11 @@ #include "imx7s.dtsi" / { - model = "Warp i.MX7 Board"; - compatible = "warp,imx7s-warp", "fsl,imx7s"; + model = "Element14 Warp i.MX7 Board"; + compatible = "element14,imx7s-warp", "fsl,imx7s"; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; @@ -54,6 +55,14 @@ regulator-always-on; }; + reg_peri_3p15v: regulator-peri-3p15v { + compatible = "regulator-fixed"; + regulator-name = "peri_3p15v_reg"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; @@ -66,7 +75,7 @@ dailink_master: simple-audio-card,codec { sound-dai = <&codec>; - clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; }; }; }; @@ -76,6 +85,10 @@ assigned-clock-rates = <884736000>; }; +&csi { + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -120,6 +133,8 @@ swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; + regulator-boot-on; + regulator-always-on; }; snvs_reg: vsnvs { @@ -177,6 +192,27 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ov2680: camera@36 { + compatible = "ovti,ov2680"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov2680>; + reg = <0x36>; + clocks = <&osc>; + clock-names = "xvclk"; + reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + DOVDD-supply = <&sw2_reg>; + DVDD-supply = <&sw2_reg>; + AVDD-supply = <®_peri_3p15v>; + + port { + ov2680_to_mipi: endpoint { + remote-endpoint = <&mipi_from_sensor>; + clock-lanes = <0>; + data-lanes = <1>; + }; + }; + }; }; &i2c3 { @@ -196,7 +232,7 @@ #sound-dai-cells = <0>; reg = <0x0a>; compatible = "fsl,sgtl5000"; - clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai1_mclk>; VDDA-supply = <&vgen4_reg>; @@ -210,6 +246,22 @@ }; }; +&mipi_csi { + clock-frequency = <166000000>; + status = "okay"; + + ports { + port@0 { + reg = <0>; + + mipi_from_sensor: endpoint { + remote-endpoint = <&ov2680_to_mipi>; + data-lanes = <1>; + }; + }; + }; +}; + &sai1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai1>; @@ -276,6 +328,10 @@ status = "okay"; }; +&video_mux { + status = "okay"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -330,6 +386,12 @@ >; }; + pinctrl_ov2680: ov2660grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x14 + >; + }; + pinctrl_sai1: sai1grp { fsl,pins = < MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1f diff --git a/arch/arm/dts/imx7s.dtsi b/arch/arm/dts/imx7s.dtsi index cf0206dd0f0..29148285f9f 100644 --- a/arch/arm/dts/imx7s.dtsi +++ b/arch/arm/dts/imx7s.dtsi @@ -1,51 +1,14 @@ -/* - * Copyright 2015 Freescale Semiconductor, Inc. - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2015 Freescale Semiconductor, Inc. +// Copyright 2016 Toradex AG #include #include #include #include #include +#include #include "imx7d-pinfunc.h" / { @@ -55,10 +18,8 @@ * The decompressor and also some bootloaders rely on a * pre-existing /chosen node to be available to insert the * command line and merge other ATAGS info. - * Also for U-Boot there must be a pre-existing /memory node. */ chosen {}; - memory { device_type = "memory"; }; aliases { gpio0 = &gpio1; @@ -82,18 +43,31 @@ serial4 = &uart5; serial5 = &uart6; serial6 = &uart7; - spi0 = &qspi1; - spi1 = &ecspi1; - spi2 = &ecspi2; - spi3 = &ecspi3; - spi4 = &ecspi4; - ethernet0 = &fec1; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + usb0 = &usbotg1; + usb1 = &usbh; }; cpus { #address-cells = <1>; #size-cells = <0>; + idle-states { + entry-method = "psci"; + + cpu_sleep_wait: cpu-sleep-wait { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <100>; + exit-latency-us = <50>; + min-residency-us = <1000>; + }; + }; + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; @@ -101,6 +75,23 @@ clock-frequency = <792000000>; clock-latency = <61036>; /* two CLK32 periods */ clocks = <&clks IMX7D_CLK_ARM>; + cpu-idle-states = <&cpu_sleep_wait>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + nvmem-cells = <&fuse_grade>; + nvmem-cell-names = "speed_grade"; + }; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-792000000 { + opp-hz = /bits/ 64 <792000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + opp-supported-hw = <0xf>, <0xf>; }; }; @@ -129,6 +120,7 @@ compatible = "usb-nop-xceiv"; clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; clock-names = "main_clk"; + power-domains = <&pgc_hsic_phy>; #phy-cells = <0>; }; @@ -144,9 +136,9 @@ * non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell" */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; /* replicator output ports */ @@ -163,12 +155,11 @@ remote-endpoint = <&etr_in_port>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator_in_port0: endpoint { - slave-mode; remote-endpoint = <&etf_out_port>; }; }; @@ -177,11 +168,12 @@ timer { compatible = "arm,armv7-timer"; + arm,cpu-registers-not-fw-configured; interrupt-parent = <&intc>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; }; soc: soc { @@ -192,33 +184,28 @@ ranges; funnel@30041000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x30041000 0x1000>; clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - ca_funnel_ports: ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel input ports */ - port@0 { - reg = <0>; + ca_funnel_in_ports: in-ports { + port { ca_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&etm0_out_port>; }; }; - /* funnel output port */ - port@2 { - reg = <0>; + /* the other input ports are not connect to anything */ + }; + + out-ports { + port { ca_funnel_out_port0: endpoint { remote-endpoint = <&hugo_funnel_in_port0>; }; }; - /* the other input ports are not connect to anything */ }; }; @@ -229,28 +216,28 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - etm0_out_port: endpoint { - remote-endpoint = <&ca_funnel_in_port0>; + out-ports { + port { + etm0_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port0>; + }; }; }; }; funnel@30083000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x30083000 0x1000>; clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; - /* funnel input ports */ port@0 { reg = <0>; hugo_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&ca_funnel_out_port0>; }; }; @@ -258,18 +245,18 @@ port@1 { reg = <1>; hugo_funnel_in_port1: endpoint { - slave-mode; /* M4 input */ + /* M4 input */ }; }; + /* the other input ports are not connect to anything */ + }; - port@2 { - reg = <0>; + out-ports { + port { hugo_funnel_out_port0: endpoint { remote-endpoint = <&etf_in_port>; }; }; - - /* the other input ports are not connect to anything */ }; }; @@ -279,20 +266,16 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { etf_in_port: endpoint { - slave-mode; remote-endpoint = <&hugo_funnel_out_port0>; }; }; + }; - port@1 { - reg = <0>; + out-ports { + port { etf_out_port: endpoint { remote-endpoint = <&replicator_in_port0>; }; @@ -306,10 +289,11 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - etr_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; + in-ports { + port { + etr_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; }; }; }; @@ -320,17 +304,18 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - tpiu_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port0>; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; }; }; }; intc: interrupt-controller@31001000 { compatible = "arm,cortex-a7-gic"; - interrupts = ; + interrupts = ; #interrupt-cells = <3>; interrupt-controller; interrupt-parent = <&intc>; @@ -431,14 +416,14 @@ gpio-ranges = <&iomuxc 0 139 16>; }; - wdog1: wdog@30280000 { + wdog1: watchdog@30280000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; interrupts = ; clocks = <&clks IMX7D_WDOG1_ROOT_CLK>; }; - wdog2: wdog@30290000 { + wdog2: watchdog@30290000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x30290000 0x10000>; interrupts = ; @@ -446,7 +431,7 @@ status = "disabled"; }; - wdog3: wdog@302a0000 { + wdog3: watchdog@302a0000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x302a0000 0x10000>; interrupts = ; @@ -454,7 +439,7 @@ status = "disabled"; }; - wdog4: wdog@302b0000 { + wdog4: watchdog@302b0000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x302b0000 0x10000>; interrupts = ; @@ -462,52 +447,52 @@ status = "disabled"; }; - iomuxc_lpsr: iomuxc-lpsr@302c0000 { + iomuxc_lpsr: pinctrl@302c0000 { compatible = "fsl,imx7d-iomuxc-lpsr"; reg = <0x302c0000 0x10000>; fsl,input-sel = <&iomuxc>; }; - gpt1: gpt@302d0000 { + gpt1: timer@302d0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302d0000 0x10000>; interrupts = ; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT1_ROOT_CLK>, <&clks IMX7D_GPT1_ROOT_CLK>; clock-names = "ipg", "per"; }; - gpt2: gpt@302e0000 { + gpt2: timer@302e0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302e0000 0x10000>; interrupts = ; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT2_ROOT_CLK>, <&clks IMX7D_GPT2_ROOT_CLK>; clock-names = "ipg", "per"; status = "disabled"; }; - gpt3: gpt@302f0000 { + gpt3: timer@302f0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302f0000 0x10000>; interrupts = ; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT3_ROOT_CLK>, <&clks IMX7D_GPT3_ROOT_CLK>; clock-names = "ipg", "per"; status = "disabled"; }; - gpt4: gpt@30300000 { + gpt4: timer@30300000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x30300000 0x10000>; interrupts = ; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT4_ROOT_CLK>, <&clks IMX7D_GPT4_ROOT_CLK>; clock-names = "ipg", "per"; status = "disabled"; }; - kpp: kpp@30320000 { + kpp: keypad@30320000 { compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp"; reg = <0x30320000 0x10000>; interrupts = ; @@ -515,18 +500,53 @@ status = "disabled"; }; - iomuxc: iomuxc@30330000 { + iomuxc: pinctrl@30330000 { compatible = "fsl,imx7d-iomuxc"; reg = <0x30330000 0x10000>; }; gpr: iomuxc-gpr@30340000 { compatible = "fsl,imx7d-iomuxc-gpr", - "fsl,imx6q-iomuxc-gpr", "syscon"; + "fsl,imx6q-iomuxc-gpr", "syscon", + "simple-mfd"; reg = <0x30340000 0x10000>; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <0>; + mux-reg-masks = <0x14 0x00000010>; + }; + + video_mux: csi-mux { + compatible = "video-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + csi_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_csi_mux>; + }; + }; + + port@2 { + reg = <2>; + + csi_mux_to_csi: endpoint { + remote-endpoint = <&csi_from_csi_mux>; + }; + }; + }; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx7d-ocotp", "syscon"; @@ -537,32 +557,19 @@ reg = <0x3c 0x4>; }; - tempmon_temp_grade: temp-grade@10 { + fuse_grade: fuse-grade@10 { reg = <0x10 0x4>; }; }; - tempmon: tempmon { - compatible = "fsl,imx7d-tempmon"; - interrupts = ; - fsl,tempmon =<&anatop>; - nvmem-cells = <&tempmon_calib>, - <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; - }; - anatop: anatop@30360000 { compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; + "syscon", "simple-mfd"; reg = <0x30360000 0x10000>; interrupts = , ; - #address-cells = <1>; - #size-cells = <0>; - reg_1p0d: regulator-vdd1p0d@30360210 { - reg = <0x30360210>; + reg_1p0d: regulator-vdd1p0d { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p0d"; regulator-min-microvolt = <800000>; @@ -575,6 +582,30 @@ anatop-max-voltage = <1200000>; anatop-enable-bit = <0>; }; + + reg_1p2: regulator-vdd1p2 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + anatop-reg-offset = <0x220>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0x14>; + anatop-min-voltage = <1100000>; + anatop-max-voltage = <1300000>; + anatop-enable-bit = <0>; + }; + + tempmon: tempmon { + compatible = "fsl,imx7d-tempmon"; + interrupt-parent = <&gpc>; + interrupts = ; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&fuse_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; + }; }; snvs: snvs@30370000 { @@ -591,24 +622,19 @@ clock-names = "snvs-rtc"; }; - snvs_poweroff: snvs-poweroff { - compatible = "syscon-poweroff"; - regmap = <&snvs>; - offset = <0x38>; - value = <0x60>; - mask = <0x60>; - }; - snvs_pwrkey: snvs-powerkey { compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; interrupts = ; + clocks = <&clks IMX7D_SNVS_CLK>; + clock-names = "snvs-pwrkey"; linux,keycode = ; wakeup-source; + status = "disabled"; }; }; - clks: ccm@30380000 { + clks: clock-controller@30380000 { compatible = "fsl,imx7d-ccm"; reg = <0x30380000 0x10000>; interrupts = , @@ -618,7 +644,7 @@ clock-names = "ckil", "osc"; }; - src: src@30390000 { + src: reset-controller@30390000 { compatible = "fsl,imx7d-src", "syscon"; reg = <0x30390000 0x10000>; interrupts = ; @@ -638,11 +664,23 @@ #address-cells = <1>; #size-cells = <0>; - pgc_pcie_phy: pgc-power-domain@1 { + pgc_mipi_phy: power-domain@0 { + #power-domain-cells = <0>; + reg = <0>; + power-supply = <®_1p0d>; + }; + + pgc_pcie_phy: power-domain@1 { #power-domain-cells = <0>; reg = <1>; power-supply = <®_1p0d>; }; + + pgc_hsic_phy: power-domain@2 { + #power-domain-cells = <0>; + reg = <2>; + power-supply = <®_1p2>; + }; }; }; }; @@ -660,6 +698,7 @@ interrupts = ; clocks = <&clks IMX7D_ADC_ROOT_CLK>; clock-names = "adc"; + #io-channel-cells = <1>; status = "disabled"; }; @@ -669,10 +708,11 @@ interrupts = ; clocks = <&clks IMX7D_ADC_ROOT_CLK>; clock-names = "adc"; + #io-channel-cells = <1>; status = "disabled"; }; - ecspi4: ecspi@30630000 { + ecspi4: spi@30630000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -684,6 +724,34 @@ status = "disabled"; }; + ftm1: pwm@30640000 { + compatible = "fsl,vf610-ftm-pwm"; + reg = <0x30640000 0x10000>; + #pwm-cells = <3>; + interrupts = ; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks IMX7D_FLEXTIMER1_ROOT_CLK>, + <&clks IMX7D_FLEXTIMER1_ROOT_CLK>, + <&clks IMX7D_FLEXTIMER1_ROOT_CLK>, + <&clks IMX7D_FLEXTIMER1_ROOT_CLK>; + status = "disabled"; + }; + + ftm2: pwm@30650000 { + compatible = "fsl,vf610-ftm-pwm"; + reg = <0x30650000 0x10000>; + #pwm-cells = <3>; + interrupts = ; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks IMX7D_FLEXTIMER2_ROOT_CLK>, + <&clks IMX7D_FLEXTIMER2_ROOT_CLK>, + <&clks IMX7D_FLEXTIMER2_ROOT_CLK>, + <&clks IMX7D_FLEXTIMER2_ROOT_CLK>; + status = "disabled"; + }; + pwm1: pwm@30660000 { compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; reg = <0x30660000 0x10000>; @@ -728,6 +796,23 @@ status = "disabled"; }; + csi: csi@30710000 { + compatible = "fsl,imx7-csi"; + reg = <0x30710000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CSI_MCLK_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "axi", "mclk", "dcic"; + status = "disabled"; + + port { + csi_from_csi_mux: endpoint { + remote-endpoint = <&csi_mux_to_csi>; + }; + }; + }; + lcdif: lcdif@30730000 { compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; reg = <0x30730000 0x10000>; @@ -737,6 +822,37 @@ clock-names = "pix", "axi"; status = "disabled"; }; + + mipi_csi: mipi-csi@30750000 { + compatible = "fsl,imx7-mipi-csi2"; + reg = <0x30750000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "pclk", "wrap", "phy"; + power-domains = <&pgc_mipi_phy>; + phy-supply = <®_1p0d>; + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + mipi_vc0_to_csi_mux: endpoint { + remote-endpoint = <&csi_mux_from_mipi_vc0>; + }; + }; + }; + }; }; aips3: bus@30800000 { @@ -753,7 +869,7 @@ reg = <0x30800000 0x100000>; ranges; - ecspi1: ecspi@30820000 { + ecspi1: spi@30820000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -765,7 +881,7 @@ status = "disabled"; }; - ecspi2: ecspi@30830000 { + ecspi2: spi@30830000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -777,7 +893,7 @@ status = "disabled"; }; - ecspi3: ecspi@30840000 { + ecspi3: spi@30840000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -868,7 +984,7 @@ }; }; - crypto: caam@30900000 { + crypto: crypto@30900000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; @@ -879,19 +995,19 @@ <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; clock-names = "ipg", "aclk"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = ; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = ; }; - sec_jr2: jr1@3000 { + sec_jr2: jr@3000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = ; @@ -905,6 +1021,7 @@ clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CAN1_ROOT_CLK>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 1>; status = "disabled"; }; @@ -915,6 +1032,7 @@ clocks = <&clks IMX7D_CLK_DUMMY>, <&clks IMX7D_CAN2_ROOT_CLK>; clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x10 2>; status = "disabled"; }; @@ -1002,6 +1120,25 @@ status = "disabled"; }; + mu0a: mailbox@30aa0000 { + compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_MU_ROOT_CLK>; + #mbox-cells = <2>; + status = "disabled"; + }; + + mu0b: mailbox@30ab0000 { + compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu"; + reg = <0x30ab0000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_MU_ROOT_CLK>; + #mbox-cells = <2>; + fsl,mu-side-b; + status = "disabled"; + }; + usbotg1: usb@30b10000 { compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; reg = <0x30b10000 0x200>; @@ -1038,7 +1175,7 @@ reg = <0x30b30200 0x200>; }; - usdhc1: usdhc@30b40000 { + usdhc1: mmc@30b40000 { compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b40000 0x10000>; interrupts = ; @@ -1050,7 +1187,7 @@ status = "disabled"; }; - usdhc2: usdhc@30b50000 { + usdhc2: mmc@30b50000 { compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b50000 0x10000>; interrupts = ; @@ -1062,7 +1199,7 @@ status = "disabled"; }; - usdhc3: usdhc@30b60000 { + usdhc3: mmc@30b60000 { compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b60000 0x10000>; interrupts = ; @@ -1074,12 +1211,12 @@ status = "disabled"; }; - qspi1: qspi@30bb0000 { - #address-cells = <1>; - #size-cells = <0>; + qspi: spi@30bb0000 { compatible = "fsl,imx7d-qspi"; reg = <0x30bb0000 0x10000>, <0x60000000 0x10000000>; reg-names = "QuadSPI", "QuadSPI-memory"; + #address-cells = <1>; + #size-cells = <0>; interrupts = ; clocks = <&clks IMX7D_QSPI_ROOT_CLK>, <&clks IMX7D_QSPI_ROOT_CLK>; @@ -1091,8 +1228,8 @@ compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma"; reg = <0x30bd0000 0x10000>; interrupts = ; - clocks = <&clks IMX7D_SDMA_CORE_CLK>, - <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_SDMA_CORE_CLK>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; @@ -1106,15 +1243,16 @@ , , ; - clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + clocks = <&clks IMX7D_ENET1_IPG_ROOT_CLK>, <&clks IMX7D_ENET_AXI_ROOT_CLK>, <&clks IMX7D_ENET1_TIME_ROOT_CLK>, <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; + fsl,stop-mode = <&gpr 0x10 3>; status = "disabled"; }; }; @@ -1132,7 +1270,7 @@ clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>; }; - gpmi: gpmi-nand@33002000{ + gpmi: nand-controller@33002000{ compatible = "fsl,imx7d-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h index b2325d3e236..1d4c0dfe020 100644 --- a/include/dt-bindings/clock/imx7d-clock.h +++ b/include/dt-bindings/clock/imx7d-clock.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2014-2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * */ #ifndef __DT_BINDINGS_CLOCK_IMX7D_H @@ -168,7 +164,7 @@ #define IMX7D_SPDIF_ROOT_SRC 155 #define IMX7D_SPDIF_ROOT_CG 156 #define IMX7D_SPDIF_ROOT_DIV 157 -#define IMX7D_ENET1_REF_ROOT_CLK 158 +#define IMX7D_ENET1_IPG_ROOT_CLK 158 #define IMX7D_ENET1_REF_ROOT_SRC 159 #define IMX7D_ENET1_REF_ROOT_CG 160 #define IMX7D_ENET1_REF_ROOT_DIV 161 @@ -176,7 +172,7 @@ #define IMX7D_ENET1_TIME_ROOT_SRC 163 #define IMX7D_ENET1_TIME_ROOT_CG 164 #define IMX7D_ENET1_TIME_ROOT_DIV 165 -#define IMX7D_ENET2_REF_ROOT_CLK 166 +#define IMX7D_ENET2_IPG_ROOT_CLK 166 #define IMX7D_ENET2_REF_ROOT_SRC 167 #define IMX7D_ENET2_REF_ROOT_CG 168 #define IMX7D_ENET2_REF_ROOT_DIV 169 @@ -455,5 +451,6 @@ #define IMX7D_SNVS_CLK 442 #define IMX7D_CAAM_CLK 443 #define IMX7D_KPP_ROOT_CLK 444 -#define IMX7D_CLK_END 445 +#define IMX7D_PXP_CLK 445 +#define IMX7D_CLK_END 446 #endif /* __DT_BINDINGS_CLOCK_IMX7D_H */ diff --git a/include/dt-bindings/power/imx7-power.h b/include/dt-bindings/power/imx7-power.h index 3a181e41051..597c1aa06ae 100644 --- a/include/dt-bindings/power/imx7-power.h +++ b/include/dt-bindings/power/imx7-power.h @@ -1,9 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2017 Impinj - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __DT_BINDINGS_IMX7_POWER_H__ -- 2.35.1