* [PATCH net-next v3 0/3] Add a second bind table hashed by port + address
@ 2022-07-22 19:54 Joanne Koong
2022-07-22 19:54 ` [PATCH net-next v3 1/3] net: Add a bhash2 " Joanne Koong
` (2 more replies)
0 siblings, 3 replies; 21+ messages in thread
From: Joanne Koong @ 2022-07-22 19:54 UTC (permalink / raw)
To: netdev; +Cc: pabeni, edumazet, kuba, kafai, davem, Joanne Koong
Currently, there is one bind hashtable (bhash) that hashes by port only.
This patchset adds a second bind table (bhash2) that hashes by port and
address.
The motivation for adding bhash2 is to expedite bind requests in situations
where the port has many sockets in its bhash table entry (eg a large number
of sockets bound to different addresses on the same port), which makes checking
bind conflicts costly especially given that we acquire the table entry spinlock
while doing so, which can cause softirq cpu lockups and can prevent new tcp
connections.
We ran into this problem at Meta where the traffic team binds a large number
of IPs to port 443 and the bind() call took a significant amount of time
which led to cpu softirq lockups, which caused packet drops and other failures
on the machine.
When experimentally testing this on a local server for ~24k sockets bound to
the port, the results seen were:
ipv4:
before - 0.002317 seconds
with bhash2 - 0.000020 seconds
ipv6:
before - 0.002431 seconds
with bhash2 - 0.000021 seconds
The additions to the initial bhash2 submission [0] are:
* Updating bhash2 in the cases where a socket's rcv saddr changes after it has
* been bound
* Adding locks for bhash2 hashbuckets
[0] https://lore.kernel.org/netdev/20220520001834.2247810-1-kuba@kernel.org/
---
Changelog
v2 -> v3
v2: https://lore.kernel.org/netdev/20220712235310.1935121-1-joannelkoong@gmail.com/
* Address Paolo's feedback
1/3:
- Move inet_bhashfn_portaddr down in inet_csk_find_open_port()
- Remove unused "head" in inet_bhash2_update_saddr
2/3:
- Make tests work for ipv4, make address configurable from command line
- Use 'nodad' option for ip addr add in script
3/3:
- Add sk_bind_sendto_listen to Makefile for it to run automatically
* Check if the icsk_bind2_hash was set before finding the prev_addr_hashbucket.
If the icsk_bind2_hash wasn't set, this means the prev address was never
added to the bhash2, so pass in NULL "prev_saddr" to inet_bhash2_update_saddr().
This addresses the kernel_NULL_pointer_dereference report [1].
* Add sk_connect_zero_addr test (tests that the kernel_NULL_pointer_dereference bug
is fixed).
[1] https://lore.kernel.org/netdev/YtLJMxChUupbAa+U@xsang-OptiPlex-9020/
v1 -> v2
v1: https://lore.kernel.org/netdev/20220623234242.2083895-2-joannelkoong@gmail.com/
* Drop formatting change to sk_add_bind_node()
Joanne Koong (3):
net: Add a bhash2 table hashed by port + address
selftests/net: Add test for timing a bind request to a port with a
populated bhash entry
selftests/net: Add sk_bind_sendto_listen and sk_connect_zero_addr
include/net/inet_connection_sock.h | 3 +
include/net/inet_hashtables.h | 80 ++++-
include/net/sock.h | 14 +
net/dccp/ipv4.c | 26 +-
net/dccp/ipv6.c | 13 +
net/dccp/proto.c | 34 ++-
net/ipv4/af_inet.c | 27 +-
net/ipv4/inet_connection_sock.c | 275 ++++++++++++++----
net/ipv4/inet_hashtables.c | 268 ++++++++++++++++-
net/ipv4/tcp.c | 11 +-
net/ipv4/tcp_ipv4.c | 24 +-
net/ipv6/tcp_ipv6.c | 13 +
tools/testing/selftests/net/.gitignore | 5 +-
tools/testing/selftests/net/Makefile | 5 +
tools/testing/selftests/net/bind_bhash.c | 144 +++++++++
tools/testing/selftests/net/bind_bhash.sh | 66 +++++
.../selftests/net/sk_bind_sendto_listen.c | 80 +++++
.../selftests/net/sk_connect_zero_addr.c | 57 ++++
18 files changed, 1050 insertions(+), 95 deletions(-)
create mode 100644 tools/testing/selftests/net/bind_bhash.c
create mode 100755 tools/testing/selftests/net/bind_bhash.sh
create mode 100644 tools/testing/selftests/net/sk_bind_sendto_listen.c
create mode 100644 tools/testing/selftests/net/sk_connect_zero_addr.c
--
2.30.2
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address
2022-07-22 19:54 [PATCH net-next v3 0/3] Add a second bind table hashed by port + address Joanne Koong
@ 2022-07-22 19:54 ` Joanne Koong
2022-07-25 16:58 ` kernel test robot
2022-07-31 18:46 ` [PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address kernel test robot
2022-07-22 19:54 ` [PATCH net-next v3 2/3] selftests/net: Add test for timing a bind request to a port with a populated bhash entry Joanne Koong
2022-07-22 19:54 ` [PATCH net-next v3 3/3] selftests/net: Add sk_bind_sendto_listen and sk_connect_zero_addr Joanne Koong
2 siblings, 2 replies; 21+ messages in thread
From: Joanne Koong @ 2022-07-22 19:54 UTC (permalink / raw)
To: netdev; +Cc: pabeni, edumazet, kuba, kafai, davem, Joanne Koong
The current bind hashtable (bhash) is hashed by port only.
In the socket bind path, we have to check for bind conflicts by
traversing the specified port's inet_bind_bucket while holding the
hashbucket's spinlock (see inet_csk_get_port() and
inet_csk_bind_conflict()). In instances where there are tons of
sockets hashed to the same port at different addresses, the bind
conflict check is time-intensive and can cause softirq cpu lockups,
as well as stops new tcp connections since __inet_inherit_port()
also contests for the spinlock.
This patch adds a second bind table, bhash2, that hashes by
port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6).
Searching the bhash2 table leads to significantly faster conflict
resolution and less time holding the hashbucket spinlock.
Please note a few things:
* There can be the case where the a socket's address changes after it
has been bound. There are two cases where this happens:
1) The case where there is a bind() call on INADDR_ANY (ipv4) or
IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will
assign the socket an address when it handles the connect()
2) In inet_sk_reselect_saddr(), which is called when rebuilding the
sk header and a few pre-conditions are met (eg rerouting fails).
In these two cases, we need to update the bhash2 table by removing the
entry for the old address, and add a new entry reflecting the updated
address.
* The bhash2 table must have its own lock, even though concurrent
accesses on the same port are protected by the bhash lock. Bhash2 must
have its own lock to protect against cases where sockets on different
ports hash to different bhash hashbuckets but to the same bhash2
hashbucket.
This brings up a few stipulations:
1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock
will always be acquired after the bhash lock and released before the
bhash lock is released.
2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always
acquired+released before another bhash2 lock is acquired+released.
* The bhash table cannot be superseded by the bhash2 table because for
bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket
bound to that port must be checked for a potential conflict. The bhash
table is the only source of port->socket associations.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
---
include/net/inet_connection_sock.h | 3 +
include/net/inet_hashtables.h | 80 ++++++++-
include/net/sock.h | 14 ++
net/dccp/ipv4.c | 26 ++-
net/dccp/ipv6.c | 13 ++
net/dccp/proto.c | 34 +++-
net/ipv4/af_inet.c | 27 ++-
net/ipv4/inet_connection_sock.c | 275 ++++++++++++++++++++++-------
net/ipv4/inet_hashtables.c | 268 ++++++++++++++++++++++++++--
net/ipv4/tcp.c | 11 +-
net/ipv4/tcp_ipv4.c | 24 ++-
net/ipv6/tcp_ipv6.c | 13 ++
12 files changed, 694 insertions(+), 94 deletions(-)
diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h
index 85cd695e7fd1..077cd730ce2f 100644
--- a/include/net/inet_connection_sock.h
+++ b/include/net/inet_connection_sock.h
@@ -25,6 +25,7 @@
#undef INET_CSK_CLEAR_TIMERS
struct inet_bind_bucket;
+struct inet_bind2_bucket;
struct tcp_congestion_ops;
/*
@@ -57,6 +58,7 @@ struct inet_connection_sock_af_ops {
*
* @icsk_accept_queue: FIFO of established children
* @icsk_bind_hash: Bind node
+ * @icsk_bind2_hash: Bind node in the bhash2 table
* @icsk_timeout: Timeout
* @icsk_retransmit_timer: Resend (no ack)
* @icsk_rto: Retransmit timeout
@@ -83,6 +85,7 @@ struct inet_connection_sock {
struct inet_sock icsk_inet;
struct request_sock_queue icsk_accept_queue;
struct inet_bind_bucket *icsk_bind_hash;
+ struct inet_bind2_bucket *icsk_bind2_hash;
unsigned long icsk_timeout;
struct timer_list icsk_retransmit_timer;
struct timer_list icsk_delack_timer;
diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
index fd6b510d114b..b18ec7e9ecfc 100644
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -23,6 +23,7 @@
#include <net/inet_connection_sock.h>
#include <net/inet_sock.h>
+#include <net/ip.h>
#include <net/sock.h>
#include <net/route.h>
#include <net/tcp_states.h>
@@ -90,7 +91,28 @@ struct inet_bind_bucket {
struct hlist_head owners;
};
-static inline struct net *ib_net(struct inet_bind_bucket *ib)
+struct inet_bind2_bucket {
+ possible_net_t ib_net;
+ int l3mdev;
+ unsigned short port;
+ union {
+#if IS_ENABLED(CONFIG_IPV6)
+ struct in6_addr v6_rcv_saddr;
+#endif
+ __be32 rcv_saddr;
+ };
+ /* Node in the bhash2 inet_bind_hashbucket chain */
+ struct hlist_node node;
+ /* List of sockets hashed to this bucket */
+ struct hlist_head owners;
+};
+
+static inline struct net *ib_net(const struct inet_bind_bucket *ib)
+{
+ return read_pnet(&ib->ib_net);
+}
+
+static inline struct net *ib2_net(const struct inet_bind2_bucket *ib)
{
return read_pnet(&ib->ib_net);
}
@@ -133,7 +155,14 @@ struct inet_hashinfo {
* TCP hash as well as the others for fast bind/connect.
*/
struct kmem_cache *bind_bucket_cachep;
+ /* This bind table is hashed by local port */
struct inet_bind_hashbucket *bhash;
+ struct kmem_cache *bind2_bucket_cachep;
+ /* This bind table is hashed by local port and sk->sk_rcv_saddr (ipv4)
+ * or sk->sk_v6_rcv_saddr (ipv6). This 2nd bind table is used
+ * primarily for expediting bind conflict resolution.
+ */
+ struct inet_bind_hashbucket *bhash2;
unsigned int bhash_size;
/* The 2nd listener table hashed by local port and address */
@@ -193,14 +222,61 @@ inet_bind_bucket_create(struct kmem_cache *cachep, struct net *net,
void inet_bind_bucket_destroy(struct kmem_cache *cachep,
struct inet_bind_bucket *tb);
+bool inet_bind_bucket_match(const struct inet_bind_bucket *tb,
+ const struct net *net, unsigned short port,
+ int l3mdev);
+
+struct inet_bind2_bucket *
+inet_bind2_bucket_create(struct kmem_cache *cachep, struct net *net,
+ struct inet_bind_hashbucket *head,
+ unsigned short port, int l3mdev,
+ const struct sock *sk);
+
+void inet_bind2_bucket_destroy(struct kmem_cache *cachep,
+ struct inet_bind2_bucket *tb);
+
+struct inet_bind2_bucket *
+inet_bind2_bucket_find(const struct inet_bind_hashbucket *head,
+ const struct net *net,
+ unsigned short port, int l3mdev,
+ const struct sock *sk);
+
+bool inet_bind2_bucket_match_addr_any(const struct inet_bind2_bucket *tb,
+ const struct net *net, unsigned short port,
+ int l3mdev, const struct sock *sk);
+
static inline u32 inet_bhashfn(const struct net *net, const __u16 lport,
const u32 bhash_size)
{
return (lport + net_hash_mix(net)) & (bhash_size - 1);
}
+static inline struct inet_bind_hashbucket *
+inet_bhashfn_portaddr(const struct inet_hashinfo *hinfo, const struct sock *sk,
+ const struct net *net, unsigned short port)
+{
+ u32 hash;
+
+#if IS_ENABLED(CONFIG_IPV6)
+ if (sk->sk_family == AF_INET6)
+ hash = ipv6_portaddr_hash(net, &sk->sk_v6_rcv_saddr, port);
+ else
+#endif
+ hash = ipv4_portaddr_hash(net, sk->sk_rcv_saddr, port);
+ return &hinfo->bhash2[hash & (hinfo->bhash_size - 1)];
+}
+
+struct inet_bind_hashbucket *
+inet_bhash2_addr_any_hashbucket(const struct sock *sk, const struct net *net, int port);
+
+/* This should be called whenever a socket's sk_rcv_saddr (ipv4) or
+ * sk_v6_rcv_saddr (ipv6) changes after it has been binded. The socket's
+ * rcv_saddr field should already have been updated when this is called.
+ */
+int inet_bhash2_update_saddr(struct inet_bind_hashbucket *prev_saddr, struct sock *sk);
+
void inet_bind_hash(struct sock *sk, struct inet_bind_bucket *tb,
- const unsigned short snum);
+ struct inet_bind2_bucket *tb2, unsigned short port);
/* Caller must disable local BH processing. */
int __inet_inherit_port(const struct sock *sk, struct sock *child);
diff --git a/include/net/sock.h b/include/net/sock.h
index f7ad1a7705e9..d8156de55eba 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -348,6 +348,7 @@ struct sk_filter;
* @sk_txtime_report_errors: set report errors mode for SO_TXTIME
* @sk_txtime_unused: unused txtime flags
* @ns_tracker: tracker for netns reference
+ * @sk_bind2_node: bind node in the bhash2 table
*/
struct sock {
/*
@@ -537,6 +538,7 @@ struct sock {
#endif
struct rcu_head sk_rcu;
netns_tracker ns_tracker;
+ struct hlist_node sk_bind2_node;
};
enum sk_pacing {
@@ -817,6 +819,16 @@ static inline void sk_add_bind_node(struct sock *sk,
hlist_add_head(&sk->sk_bind_node, list);
}
+static inline void __sk_del_bind2_node(struct sock *sk)
+{
+ __hlist_del(&sk->sk_bind2_node);
+}
+
+static inline void sk_add_bind2_node(struct sock *sk, struct hlist_head *list)
+{
+ hlist_add_head(&sk->sk_bind2_node, list);
+}
+
#define sk_for_each(__sk, list) \
hlist_for_each_entry(__sk, list, sk_node)
#define sk_for_each_rcu(__sk, list) \
@@ -834,6 +846,8 @@ static inline void sk_add_bind_node(struct sock *sk,
hlist_for_each_entry_safe(__sk, tmp, list, sk_node)
#define sk_for_each_bound(__sk, list) \
hlist_for_each_entry(__sk, list, sk_bind_node)
+#define sk_for_each_bound_bhash2(__sk, list) \
+ hlist_for_each_entry(__sk, list, sk_bind2_node)
/**
* sk_for_each_entry_offset_rcu - iterate over a list at a given struct offset
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index da6e3b20cd75..8a7ef5847917 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -45,10 +45,12 @@ static unsigned int dccp_v4_pernet_id __read_mostly;
int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
{
const struct sockaddr_in *usin = (struct sockaddr_in *)uaddr;
+ struct inet_bind_hashbucket *prev_addr_hashbucket = NULL;
+ __be32 daddr, nexthop, prev_sk_rcv_saddr;
struct inet_sock *inet = inet_sk(sk);
struct dccp_sock *dp = dccp_sk(sk);
__be16 orig_sport, orig_dport;
- __be32 daddr, nexthop;
+ bool new_sk_saddr = false;
struct flowi4 *fl4;
struct rtable *rt;
int err;
@@ -89,9 +91,29 @@ int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
if (inet_opt == NULL || !inet_opt->opt.srr)
daddr = fl4->daddr;
- if (inet->inet_saddr == 0)
+ if (inet->inet_saddr == 0) {
+ if (inet_csk(sk)->icsk_bind2_hash)
+ prev_addr_hashbucket =
+ inet_bhashfn_portaddr(&dccp_hashinfo, sk,
+ sock_net(sk),
+ inet->inet_num);
+ prev_sk_rcv_saddr = sk->sk_rcv_saddr;
inet->inet_saddr = fl4->saddr;
+ new_sk_saddr = true;
+ }
+
sk_rcv_saddr_set(sk, inet->inet_saddr);
+
+ if (new_sk_saddr) {
+ err = inet_bhash2_update_saddr(prev_addr_hashbucket, sk);
+ if (err) {
+ inet->inet_saddr = 0;
+ sk_rcv_saddr_set(sk, prev_sk_rcv_saddr);
+ ip_rt_put(rt);
+ return err;
+ }
+ }
+
inet->inet_dport = usin->sin_port;
sk_daddr_set(sk, daddr);
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index fd44638ec16b..503d8e83ac52 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -934,8 +934,21 @@ static int dccp_v6_connect(struct sock *sk, struct sockaddr *uaddr,
}
if (saddr == NULL) {
+ struct in6_addr prev_v6_rcv_saddr = sk->sk_v6_rcv_saddr;
+ struct inet_bind_hashbucket *prev_addr_hashbucket = NULL;
+
+ if (icsk->icsk_bind2_hash)
+ prev_addr_hashbucket = inet_bhashfn_portaddr(&dccp_hashinfo,
+ sk, sock_net(sk),
+ inet->inet_num);
saddr = &fl6.saddr;
sk->sk_v6_rcv_saddr = *saddr;
+
+ err = inet_bhash2_update_saddr(prev_addr_hashbucket, sk);
+ if (err) {
+ sk->sk_v6_rcv_saddr = prev_v6_rcv_saddr;
+ goto failure;
+ }
}
/* set the source address */
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index eb8e128e43e8..f4f2ad5f9c08 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -1120,6 +1120,12 @@ static int __init dccp_init(void)
SLAB_HWCACHE_ALIGN | SLAB_ACCOUNT, NULL);
if (!dccp_hashinfo.bind_bucket_cachep)
goto out_free_hashinfo2;
+ dccp_hashinfo.bind2_bucket_cachep =
+ kmem_cache_create("dccp_bind2_bucket",
+ sizeof(struct inet_bind2_bucket), 0,
+ SLAB_HWCACHE_ALIGN | SLAB_ACCOUNT, NULL);
+ if (!dccp_hashinfo.bind2_bucket_cachep)
+ goto out_free_bind_bucket_cachep;
/*
* Size and allocate the main established and bind bucket
@@ -1150,7 +1156,7 @@ static int __init dccp_init(void)
if (!dccp_hashinfo.ehash) {
DCCP_CRIT("Failed to allocate DCCP established hash table");
- goto out_free_bind_bucket_cachep;
+ goto out_free_bind2_bucket_cachep;
}
for (i = 0; i <= dccp_hashinfo.ehash_mask; i++)
@@ -1176,14 +1182,24 @@ static int __init dccp_init(void)
goto out_free_dccp_locks;
}
+ dccp_hashinfo.bhash2 = (struct inet_bind_hashbucket *)
+ __get_free_pages(GFP_ATOMIC | __GFP_NOWARN, bhash_order);
+
+ if (!dccp_hashinfo.bhash2) {
+ DCCP_CRIT("Failed to allocate DCCP bind2 hash table");
+ goto out_free_dccp_bhash;
+ }
+
for (i = 0; i < dccp_hashinfo.bhash_size; i++) {
spin_lock_init(&dccp_hashinfo.bhash[i].lock);
INIT_HLIST_HEAD(&dccp_hashinfo.bhash[i].chain);
+ spin_lock_init(&dccp_hashinfo.bhash2[i].lock);
+ INIT_HLIST_HEAD(&dccp_hashinfo.bhash2[i].chain);
}
rc = dccp_mib_init();
if (rc)
- goto out_free_dccp_bhash;
+ goto out_free_dccp_bhash2;
rc = dccp_ackvec_init();
if (rc)
@@ -1207,30 +1223,38 @@ static int __init dccp_init(void)
dccp_ackvec_exit();
out_free_dccp_mib:
dccp_mib_exit();
+out_free_dccp_bhash2:
+ free_pages((unsigned long)dccp_hashinfo.bhash2, bhash_order);
out_free_dccp_bhash:
free_pages((unsigned long)dccp_hashinfo.bhash, bhash_order);
out_free_dccp_locks:
inet_ehash_locks_free(&dccp_hashinfo);
out_free_dccp_ehash:
free_pages((unsigned long)dccp_hashinfo.ehash, ehash_order);
+out_free_bind2_bucket_cachep:
+ kmem_cache_destroy(dccp_hashinfo.bind2_bucket_cachep);
out_free_bind_bucket_cachep:
kmem_cache_destroy(dccp_hashinfo.bind_bucket_cachep);
out_free_hashinfo2:
inet_hashinfo2_free_mod(&dccp_hashinfo);
out_fail:
dccp_hashinfo.bhash = NULL;
+ dccp_hashinfo.bhash2 = NULL;
dccp_hashinfo.ehash = NULL;
dccp_hashinfo.bind_bucket_cachep = NULL;
+ dccp_hashinfo.bind2_bucket_cachep = NULL;
return rc;
}
static void __exit dccp_fini(void)
{
+ int bhash_order = get_order(dccp_hashinfo.bhash_size *
+ sizeof(struct inet_bind_hashbucket));
+
ccid_cleanup_builtins();
dccp_mib_exit();
- free_pages((unsigned long)dccp_hashinfo.bhash,
- get_order(dccp_hashinfo.bhash_size *
- sizeof(struct inet_bind_hashbucket)));
+ free_pages((unsigned long)dccp_hashinfo.bhash, bhash_order);
+ free_pages((unsigned long)dccp_hashinfo.bhash2, bhash_order);
free_pages((unsigned long)dccp_hashinfo.ehash,
get_order((dccp_hashinfo.ehash_mask + 1) *
sizeof(struct inet_ehash_bucket)));
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 3ca0cc467886..c40b47ee1a36 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1219,6 +1219,7 @@ EXPORT_SYMBOL(inet_unregister_protosw);
static int inet_sk_reselect_saddr(struct sock *sk)
{
+ struct inet_bind_hashbucket *prev_addr_hashbucket = NULL;
struct inet_sock *inet = inet_sk(sk);
__be32 old_saddr = inet->inet_saddr;
__be32 daddr = inet->inet_daddr;
@@ -1226,6 +1227,7 @@ static int inet_sk_reselect_saddr(struct sock *sk)
struct rtable *rt;
__be32 new_saddr;
struct ip_options_rcu *inet_opt;
+ int err;
inet_opt = rcu_dereference_protected(inet->inet_opt,
lockdep_sock_is_held(sk));
@@ -1240,20 +1242,35 @@ static int inet_sk_reselect_saddr(struct sock *sk)
if (IS_ERR(rt))
return PTR_ERR(rt);
- sk_setup_caps(sk, &rt->dst);
-
new_saddr = fl4->saddr;
- if (new_saddr == old_saddr)
+ if (new_saddr == old_saddr) {
+ sk_setup_caps(sk, &rt->dst);
return 0;
+ }
+
+ if (inet_csk(sk)->icsk_bind2_hash)
+ prev_addr_hashbucket =
+ inet_bhashfn_portaddr(sk->sk_prot->h.hashinfo, sk,
+ sock_net(sk), inet->inet_num);
+
+ inet->inet_saddr = inet->inet_rcv_saddr = new_saddr;
+
+ err = inet_bhash2_update_saddr(prev_addr_hashbucket, sk);
+ if (err) {
+ inet->inet_saddr = old_saddr;
+ inet->inet_rcv_saddr = old_saddr;
+ ip_rt_put(rt);
+ return err;
+ }
+
+ sk_setup_caps(sk, &rt->dst);
if (READ_ONCE(sock_net(sk)->ipv4.sysctl_ip_dynaddr) > 1) {
pr_info("%s(): shifting inet->saddr from %pI4 to %pI4\n",
__func__, &old_saddr, &new_saddr);
}
- inet->inet_saddr = inet->inet_rcv_saddr = new_saddr;
-
/*
* XXX The only one ugly spot where we need to
* XXX really change the sockets identity after
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index eb31c7158b39..f0038043b661 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -130,14 +130,75 @@ void inet_get_local_port_range(struct net *net, int *low, int *high)
}
EXPORT_SYMBOL(inet_get_local_port_range);
+static bool inet_use_bhash2_on_bind(const struct sock *sk)
+{
+#if IS_ENABLED(CONFIG_IPV6)
+ if (sk->sk_family == AF_INET6) {
+ int addr_type = ipv6_addr_type(&sk->sk_v6_rcv_saddr);
+
+ return addr_type != IPV6_ADDR_ANY &&
+ addr_type != IPV6_ADDR_MAPPED;
+ }
+#endif
+ return sk->sk_rcv_saddr != htonl(INADDR_ANY);
+}
+
+static bool inet_bind_conflict(const struct sock *sk, struct sock *sk2,
+ kuid_t sk_uid, bool relax,
+ bool reuseport_cb_ok, bool reuseport_ok)
+{
+ int bound_dev_if2;
+
+ if (sk == sk2)
+ return false;
+
+ bound_dev_if2 = READ_ONCE(sk2->sk_bound_dev_if);
+
+ if (!sk->sk_bound_dev_if || !bound_dev_if2 ||
+ sk->sk_bound_dev_if == bound_dev_if2) {
+ if (sk->sk_reuse && sk2->sk_reuse &&
+ sk2->sk_state != TCP_LISTEN) {
+ if (!relax || (!reuseport_ok && sk->sk_reuseport &&
+ sk2->sk_reuseport && reuseport_cb_ok &&
+ (sk2->sk_state == TCP_TIME_WAIT ||
+ uid_eq(sk_uid, sock_i_uid(sk2)))))
+ return true;
+ } else if (!reuseport_ok || !sk->sk_reuseport ||
+ !sk2->sk_reuseport || !reuseport_cb_ok ||
+ (sk2->sk_state != TCP_TIME_WAIT &&
+ !uid_eq(sk_uid, sock_i_uid(sk2)))) {
+ return true;
+ }
+ }
+ return false;
+}
+
+static bool inet_bhash2_conflict(const struct sock *sk,
+ const struct inet_bind2_bucket *tb2,
+ kuid_t sk_uid,
+ bool relax, bool reuseport_cb_ok,
+ bool reuseport_ok)
+{
+ struct sock *sk2;
+
+ sk_for_each_bound_bhash2(sk2, &tb2->owners) {
+ if (sk->sk_family == AF_INET && ipv6_only_sock(sk2))
+ continue;
+
+ if (inet_bind_conflict(sk, sk2, sk_uid, relax,
+ reuseport_cb_ok, reuseport_ok))
+ return true;
+ }
+ return false;
+}
+
+/* This should be called only when the tb and tb2 hashbuckets' locks are held */
static int inet_csk_bind_conflict(const struct sock *sk,
const struct inet_bind_bucket *tb,
+ const struct inet_bind2_bucket *tb2, /* may be null */
bool relax, bool reuseport_ok)
{
- struct sock *sk2;
bool reuseport_cb_ok;
- bool reuse = sk->sk_reuse;
- bool reuseport = !!sk->sk_reuseport;
struct sock_reuseport *reuseport_cb;
kuid_t uid = sock_i_uid((struct sock *)sk);
@@ -150,55 +211,87 @@ static int inet_csk_bind_conflict(const struct sock *sk,
/*
* Unlike other sk lookup places we do not check
* for sk_net here, since _all_ the socks listed
- * in tb->owners list belong to the same net - the
- * one this bucket belongs to.
+ * in tb->owners and tb2->owners list belong
+ * to the same net - the one this bucket belongs to.
*/
- sk_for_each_bound(sk2, &tb->owners) {
- int bound_dev_if2;
+ if (!inet_use_bhash2_on_bind(sk)) {
+ struct sock *sk2;
- if (sk == sk2)
- continue;
- bound_dev_if2 = READ_ONCE(sk2->sk_bound_dev_if);
- if ((!sk->sk_bound_dev_if ||
- !bound_dev_if2 ||
- sk->sk_bound_dev_if == bound_dev_if2)) {
- if (reuse && sk2->sk_reuse &&
- sk2->sk_state != TCP_LISTEN) {
- if ((!relax ||
- (!reuseport_ok &&
- reuseport && sk2->sk_reuseport &&
- reuseport_cb_ok &&
- (sk2->sk_state == TCP_TIME_WAIT ||
- uid_eq(uid, sock_i_uid(sk2))))) &&
- inet_rcv_saddr_equal(sk, sk2, true))
- break;
- } else if (!reuseport_ok ||
- !reuseport || !sk2->sk_reuseport ||
- !reuseport_cb_ok ||
- (sk2->sk_state != TCP_TIME_WAIT &&
- !uid_eq(uid, sock_i_uid(sk2)))) {
- if (inet_rcv_saddr_equal(sk, sk2, true))
- break;
- }
- }
+ sk_for_each_bound(sk2, &tb->owners)
+ if (inet_bind_conflict(sk, sk2, uid, relax,
+ reuseport_cb_ok, reuseport_ok) &&
+ inet_rcv_saddr_equal(sk, sk2, true))
+ return true;
+
+ return false;
+ }
+
+ /* Conflicts with an existing IPV6_ADDR_ANY (if ipv6) or INADDR_ANY (if
+ * ipv4) should have been checked already. We need to do these two
+ * checks separately because their spinlocks have to be acquired/released
+ * independently of each other, to prevent possible deadlocks
+ */
+ return tb2 && inet_bhash2_conflict(sk, tb2, uid, relax, reuseport_cb_ok,
+ reuseport_ok);
+}
+
+/* Determine if there is a bind conflict with an existing IPV6_ADDR_ANY (if ipv6) or
+ * INADDR_ANY (if ipv4) socket.
+ *
+ * Caller must hold bhash hashbucket lock with local bh disabled, to protect
+ * against concurrent binds on the port for addr any
+ */
+static bool inet_bhash2_addr_any_conflict(const struct sock *sk, int port, int l3mdev,
+ bool relax, bool reuseport_ok)
+{
+ kuid_t uid = sock_i_uid((struct sock *)sk);
+ const struct net *net = sock_net(sk);
+ struct sock_reuseport *reuseport_cb;
+ struct inet_bind_hashbucket *head2;
+ struct inet_bind2_bucket *tb2;
+ bool reuseport_cb_ok;
+
+ rcu_read_lock();
+ reuseport_cb = rcu_dereference(sk->sk_reuseport_cb);
+ /* paired with WRITE_ONCE() in __reuseport_(add|detach)_closed_sock */
+ reuseport_cb_ok = !reuseport_cb || READ_ONCE(reuseport_cb->num_closed_socks);
+ rcu_read_unlock();
+
+ head2 = inet_bhash2_addr_any_hashbucket(sk, net, port);
+
+ spin_lock(&head2->lock);
+
+ inet_bind_bucket_for_each(tb2, &head2->chain)
+ if (inet_bind2_bucket_match_addr_any(tb2, net, port, l3mdev, sk))
+ break;
+
+ if (tb2 && inet_bhash2_conflict(sk, tb2, uid, relax, reuseport_cb_ok,
+ reuseport_ok)) {
+ spin_unlock(&head2->lock);
+ return true;
}
- return sk2 != NULL;
+
+ spin_unlock(&head2->lock);
+ return false;
}
/*
* Find an open port number for the socket. Returns with the
- * inet_bind_hashbucket lock held.
+ * inet_bind_hashbucket locks held if successful.
*/
static struct inet_bind_hashbucket *
-inet_csk_find_open_port(struct sock *sk, struct inet_bind_bucket **tb_ret, int *port_ret)
+inet_csk_find_open_port(const struct sock *sk, struct inet_bind_bucket **tb_ret,
+ struct inet_bind2_bucket **tb2_ret,
+ struct inet_bind_hashbucket **head2_ret, int *port_ret)
{
struct inet_hashinfo *hinfo = sk->sk_prot->h.hashinfo;
int port = 0;
- struct inet_bind_hashbucket *head;
+ struct inet_bind_hashbucket *head, *head2;
struct net *net = sock_net(sk);
bool relax = false;
int i, low, high, attempt_half;
+ struct inet_bind2_bucket *tb2;
struct inet_bind_bucket *tb;
u32 remaining, offset;
int l3mdev;
@@ -239,11 +332,20 @@ inet_csk_find_open_port(struct sock *sk, struct inet_bind_bucket **tb_ret, int *
head = &hinfo->bhash[inet_bhashfn(net, port,
hinfo->bhash_size)];
spin_lock_bh(&head->lock);
+ if (inet_use_bhash2_on_bind(sk)) {
+ if (inet_bhash2_addr_any_conflict(sk, port, l3mdev, relax, false))
+ goto next_port;
+ }
+
+ head2 = inet_bhashfn_portaddr(hinfo, sk, net, port);
+ spin_lock(&head2->lock);
+ tb2 = inet_bind2_bucket_find(head2, net, port, l3mdev, sk);
inet_bind_bucket_for_each(tb, &head->chain)
- if (net_eq(ib_net(tb), net) && tb->l3mdev == l3mdev &&
- tb->port == port) {
- if (!inet_csk_bind_conflict(sk, tb, relax, false))
+ if (inet_bind_bucket_match(tb, net, port, l3mdev)) {
+ if (!inet_csk_bind_conflict(sk, tb, tb2,
+ relax, false))
goto success;
+ spin_unlock(&head2->lock);
goto next_port;
}
tb = NULL;
@@ -272,6 +374,8 @@ inet_csk_find_open_port(struct sock *sk, struct inet_bind_bucket **tb_ret, int *
success:
*port_ret = port;
*tb_ret = tb;
+ *tb2_ret = tb2;
+ *head2_ret = head2;
return head;
}
@@ -368,53 +472,95 @@ int inet_csk_get_port(struct sock *sk, unsigned short snum)
bool reuse = sk->sk_reuse && sk->sk_state != TCP_LISTEN;
struct inet_hashinfo *hinfo = sk->sk_prot->h.hashinfo;
int ret = 1, port = snum;
- struct inet_bind_hashbucket *head;
struct net *net = sock_net(sk);
+ bool found_port = false, check_bind_conflict = true;
+ bool bhash_created = false, bhash2_created = false;
+ struct inet_bind_hashbucket *head, *head2;
+ struct inet_bind2_bucket *tb2 = NULL;
struct inet_bind_bucket *tb = NULL;
+ bool head2_lock_acquired = false;
int l3mdev;
l3mdev = inet_sk_bound_l3mdev(sk);
if (!port) {
- head = inet_csk_find_open_port(sk, &tb, &port);
+ head = inet_csk_find_open_port(sk, &tb, &tb2, &head2, &port);
if (!head)
return ret;
+
+ head2_lock_acquired = true;
+
+ if (tb && tb2)
+ goto success;
+ found_port = true;
+ } else {
+ head = &hinfo->bhash[inet_bhashfn(net, port,
+ hinfo->bhash_size)];
+ spin_lock_bh(&head->lock);
+ inet_bind_bucket_for_each(tb, &head->chain)
+ if (inet_bind_bucket_match(tb, net, port, l3mdev))
+ break;
+ }
+
+ if (!tb) {
+ tb = inet_bind_bucket_create(hinfo->bind_bucket_cachep, net,
+ head, port, l3mdev);
if (!tb)
- goto tb_not_found;
- goto success;
+ goto fail_unlock;
+ bhash_created = true;
}
- head = &hinfo->bhash[inet_bhashfn(net, port,
- hinfo->bhash_size)];
- spin_lock_bh(&head->lock);
- inet_bind_bucket_for_each(tb, &head->chain)
- if (net_eq(ib_net(tb), net) && tb->l3mdev == l3mdev &&
- tb->port == port)
- goto tb_found;
-tb_not_found:
- tb = inet_bind_bucket_create(hinfo->bind_bucket_cachep,
- net, head, port, l3mdev);
- if (!tb)
- goto fail_unlock;
-tb_found:
- if (!hlist_empty(&tb->owners)) {
- if (sk->sk_reuse == SK_FORCE_REUSE)
- goto success;
- if ((tb->fastreuse > 0 && reuse) ||
- sk_reuseport_match(tb, sk))
- goto success;
- if (inet_csk_bind_conflict(sk, tb, true, true))
+ if (!found_port) {
+ if (!hlist_empty(&tb->owners)) {
+ if (sk->sk_reuse == SK_FORCE_REUSE ||
+ (tb->fastreuse > 0 && reuse) ||
+ sk_reuseport_match(tb, sk))
+ check_bind_conflict = false;
+ }
+
+ if (check_bind_conflict && inet_use_bhash2_on_bind(sk)) {
+ if (inet_bhash2_addr_any_conflict(sk, port, l3mdev, true, true))
+ goto fail_unlock;
+ }
+
+ head2 = inet_bhashfn_portaddr(hinfo, sk, net, port);
+ spin_lock(&head2->lock);
+ head2_lock_acquired = true;
+ tb2 = inet_bind2_bucket_find(head2, net, port, l3mdev, sk);
+ }
+
+ if (!tb2) {
+ tb2 = inet_bind2_bucket_create(hinfo->bind2_bucket_cachep,
+ net, head2, port, l3mdev, sk);
+ if (!tb2)
goto fail_unlock;
+ bhash2_created = true;
}
+
+ if (!found_port && check_bind_conflict) {
+ if (inet_csk_bind_conflict(sk, tb, tb2, true, true))
+ goto fail_unlock;
+ }
+
success:
inet_csk_update_fastreuse(tb, sk);
if (!inet_csk(sk)->icsk_bind_hash)
- inet_bind_hash(sk, tb, port);
+ inet_bind_hash(sk, tb, tb2, port);
WARN_ON(inet_csk(sk)->icsk_bind_hash != tb);
+ WARN_ON(inet_csk(sk)->icsk_bind2_hash != tb2);
ret = 0;
fail_unlock:
+ if (ret) {
+ if (bhash_created)
+ inet_bind_bucket_destroy(hinfo->bind_bucket_cachep, tb);
+ if (bhash2_created)
+ inet_bind2_bucket_destroy(hinfo->bind2_bucket_cachep,
+ tb2);
+ }
+ if (head2_lock_acquired)
+ spin_unlock(&head2->lock);
spin_unlock_bh(&head->lock);
return ret;
}
@@ -962,6 +1108,7 @@ struct sock *inet_csk_clone_lock(const struct sock *sk,
inet_sk_set_state(newsk, TCP_SYN_RECV);
newicsk->icsk_bind_hash = NULL;
+ newicsk->icsk_bind2_hash = NULL;
inet_sk(newsk)->inet_dport = inet_rsk(req)->ir_rmt_port;
inet_sk(newsk)->inet_num = inet_rsk(req)->ir_num;
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index b9d995b5ce24..60d77e234a68 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -92,12 +92,75 @@ void inet_bind_bucket_destroy(struct kmem_cache *cachep, struct inet_bind_bucket
}
}
+bool inet_bind_bucket_match(const struct inet_bind_bucket *tb, const struct net *net,
+ unsigned short port, int l3mdev)
+{
+ return net_eq(ib_net(tb), net) && tb->port == port &&
+ tb->l3mdev == l3mdev;
+}
+
+static void inet_bind2_bucket_init(struct inet_bind2_bucket *tb,
+ struct net *net,
+ struct inet_bind_hashbucket *head,
+ unsigned short port, int l3mdev,
+ const struct sock *sk)
+{
+ write_pnet(&tb->ib_net, net);
+ tb->l3mdev = l3mdev;
+ tb->port = port;
+#if IS_ENABLED(CONFIG_IPV6)
+ if (sk->sk_family == AF_INET6)
+ tb->v6_rcv_saddr = sk->sk_v6_rcv_saddr;
+ else
+#endif
+ tb->rcv_saddr = sk->sk_rcv_saddr;
+ INIT_HLIST_HEAD(&tb->owners);
+ hlist_add_head(&tb->node, &head->chain);
+}
+
+struct inet_bind2_bucket *inet_bind2_bucket_create(struct kmem_cache *cachep,
+ struct net *net,
+ struct inet_bind_hashbucket *head,
+ unsigned short port,
+ int l3mdev,
+ const struct sock *sk)
+{
+ struct inet_bind2_bucket *tb = kmem_cache_alloc(cachep, GFP_ATOMIC);
+
+ if (tb)
+ inet_bind2_bucket_init(tb, net, head, port, l3mdev, sk);
+
+ return tb;
+}
+
+/* Caller must hold hashbucket lock for this tb with local BH disabled */
+void inet_bind2_bucket_destroy(struct kmem_cache *cachep, struct inet_bind2_bucket *tb)
+{
+ if (hlist_empty(&tb->owners)) {
+ __hlist_del(&tb->node);
+ kmem_cache_free(cachep, tb);
+ }
+}
+
+static bool inet_bind2_bucket_addr_match(const struct inet_bind2_bucket *tb2,
+ const struct sock *sk)
+{
+#if IS_ENABLED(CONFIG_IPV6)
+ if (sk->sk_family == AF_INET6)
+ return ipv6_addr_equal(&tb2->v6_rcv_saddr,
+ &sk->sk_v6_rcv_saddr);
+#endif
+ return tb2->rcv_saddr == sk->sk_rcv_saddr;
+}
+
void inet_bind_hash(struct sock *sk, struct inet_bind_bucket *tb,
- const unsigned short snum)
+ struct inet_bind2_bucket *tb2, unsigned short port)
{
- inet_sk(sk)->inet_num = snum;
+ inet_sk(sk)->inet_num = port;
sk_add_bind_node(sk, &tb->owners);
inet_csk(sk)->icsk_bind_hash = tb;
+ sk_add_bind2_node(sk, &tb2->owners);
+ inet_csk(sk)->icsk_bind2_hash = tb2;
}
/*
@@ -109,6 +172,9 @@ static void __inet_put_port(struct sock *sk)
const int bhash = inet_bhashfn(sock_net(sk), inet_sk(sk)->inet_num,
hashinfo->bhash_size);
struct inet_bind_hashbucket *head = &hashinfo->bhash[bhash];
+ struct inet_bind_hashbucket *head2 =
+ inet_bhashfn_portaddr(hashinfo, sk, sock_net(sk),
+ inet_sk(sk)->inet_num);
struct inet_bind_bucket *tb;
spin_lock(&head->lock);
@@ -117,6 +183,17 @@ static void __inet_put_port(struct sock *sk)
inet_csk(sk)->icsk_bind_hash = NULL;
inet_sk(sk)->inet_num = 0;
inet_bind_bucket_destroy(hashinfo->bind_bucket_cachep, tb);
+
+ spin_lock(&head2->lock);
+ if (inet_csk(sk)->icsk_bind2_hash) {
+ struct inet_bind2_bucket *tb2 = inet_csk(sk)->icsk_bind2_hash;
+
+ __sk_del_bind2_node(sk);
+ inet_csk(sk)->icsk_bind2_hash = NULL;
+ inet_bind2_bucket_destroy(hashinfo->bind2_bucket_cachep, tb2);
+ }
+ spin_unlock(&head2->lock);
+
spin_unlock(&head->lock);
}
@@ -135,12 +212,21 @@ int __inet_inherit_port(const struct sock *sk, struct sock *child)
const int bhash = inet_bhashfn(sock_net(sk), port,
table->bhash_size);
struct inet_bind_hashbucket *head = &table->bhash[bhash];
+ struct inet_bind_hashbucket *head2 =
+ inet_bhashfn_portaddr(table, child, sock_net(sk), port);
+ bool created_inet_bind_bucket = false;
+ bool update_fastreuse = false;
+ struct net *net = sock_net(sk);
+ struct inet_bind2_bucket *tb2;
struct inet_bind_bucket *tb;
int l3mdev;
spin_lock(&head->lock);
+ spin_lock(&head2->lock);
tb = inet_csk(sk)->icsk_bind_hash;
- if (unlikely(!tb)) {
+ tb2 = inet_csk(sk)->icsk_bind2_hash;
+ if (unlikely(!tb || !tb2)) {
+ spin_unlock(&head2->lock);
spin_unlock(&head->lock);
return -ENOENT;
}
@@ -153,25 +239,49 @@ int __inet_inherit_port(const struct sock *sk, struct sock *child)
* as that of the child socket. We have to look up or
* create a new bind bucket for the child here. */
inet_bind_bucket_for_each(tb, &head->chain) {
- if (net_eq(ib_net(tb), sock_net(sk)) &&
- tb->l3mdev == l3mdev && tb->port == port)
+ if (inet_bind_bucket_match(tb, net, port, l3mdev))
break;
}
if (!tb) {
tb = inet_bind_bucket_create(table->bind_bucket_cachep,
- sock_net(sk), head, port,
- l3mdev);
+ net, head, port, l3mdev);
if (!tb) {
+ spin_unlock(&head2->lock);
spin_unlock(&head->lock);
return -ENOMEM;
}
+ created_inet_bind_bucket = true;
+ }
+ update_fastreuse = true;
+
+ goto bhash2_find;
+ } else if (!inet_bind2_bucket_addr_match(tb2, child)) {
+ l3mdev = inet_sk_bound_l3mdev(sk);
+
+bhash2_find:
+ tb2 = inet_bind2_bucket_find(head2, net, port, l3mdev, child);
+ if (!tb2) {
+ tb2 = inet_bind2_bucket_create(table->bind2_bucket_cachep,
+ net, head2, port,
+ l3mdev, child);
+ if (!tb2)
+ goto error;
}
- inet_csk_update_fastreuse(tb, child);
}
- inet_bind_hash(child, tb, port);
+ if (update_fastreuse)
+ inet_csk_update_fastreuse(tb, child);
+ inet_bind_hash(child, tb, tb2, port);
+ spin_unlock(&head2->lock);
spin_unlock(&head->lock);
return 0;
+
+error:
+ if (created_inet_bind_bucket)
+ inet_bind_bucket_destroy(table->bind_bucket_cachep, tb);
+ spin_unlock(&head2->lock);
+ spin_unlock(&head->lock);
+ return -ENOMEM;
}
EXPORT_SYMBOL_GPL(__inet_inherit_port);
@@ -675,6 +785,112 @@ void inet_unhash(struct sock *sk)
}
EXPORT_SYMBOL_GPL(inet_unhash);
+static bool inet_bind2_bucket_match(const struct inet_bind2_bucket *tb,
+ const struct net *net, unsigned short port,
+ int l3mdev, const struct sock *sk)
+{
+#if IS_ENABLED(CONFIG_IPV6)
+ if (sk->sk_family == AF_INET6)
+ return net_eq(ib2_net(tb), net) && tb->port == port &&
+ tb->l3mdev == l3mdev &&
+ ipv6_addr_equal(&tb->v6_rcv_saddr, &sk->sk_v6_rcv_saddr);
+ else
+#endif
+ return net_eq(ib2_net(tb), net) && tb->port == port &&
+ tb->l3mdev == l3mdev && tb->rcv_saddr == sk->sk_rcv_saddr;
+}
+
+bool inet_bind2_bucket_match_addr_any(const struct inet_bind2_bucket *tb, const struct net *net,
+ unsigned short port, int l3mdev, const struct sock *sk)
+{
+#if IS_ENABLED(CONFIG_IPV6)
+ struct in6_addr addr_any = {};
+
+ if (sk->sk_family == AF_INET6)
+ return net_eq(ib2_net(tb), net) && tb->port == port &&
+ tb->l3mdev == l3mdev &&
+ ipv6_addr_equal(&tb->v6_rcv_saddr, &addr_any);
+ else
+#endif
+ return net_eq(ib2_net(tb), net) && tb->port == port &&
+ tb->l3mdev == l3mdev && tb->rcv_saddr == 0;
+}
+
+/* The socket's bhash2 hashbucket spinlock must be held when this is called */
+struct inet_bind2_bucket *
+inet_bind2_bucket_find(const struct inet_bind_hashbucket *head, const struct net *net,
+ unsigned short port, int l3mdev, const struct sock *sk)
+{
+ struct inet_bind2_bucket *bhash2 = NULL;
+
+ inet_bind_bucket_for_each(bhash2, &head->chain)
+ if (inet_bind2_bucket_match(bhash2, net, port, l3mdev, sk))
+ break;
+
+ return bhash2;
+}
+
+struct inet_bind_hashbucket *
+inet_bhash2_addr_any_hashbucket(const struct sock *sk, const struct net *net, int port)
+{
+ struct inet_hashinfo *hinfo = sk->sk_prot->h.hashinfo;
+ u32 hash;
+#if IS_ENABLED(CONFIG_IPV6)
+ struct in6_addr addr_any = {};
+
+ if (sk->sk_family == AF_INET6)
+ hash = ipv6_portaddr_hash(net, &addr_any, port);
+ else
+#endif
+ hash = ipv4_portaddr_hash(net, 0, port);
+
+ return &hinfo->bhash2[hash & (hinfo->bhash_size - 1)];
+}
+
+int inet_bhash2_update_saddr(struct inet_bind_hashbucket *prev_saddr, struct sock *sk)
+{
+ struct inet_hashinfo *hinfo = sk->sk_prot->h.hashinfo;
+ struct inet_bind2_bucket *tb2, *new_tb2;
+ int l3mdev = inet_sk_bound_l3mdev(sk);
+ struct inet_bind_hashbucket *head2;
+ int port = inet_sk(sk)->inet_num;
+ struct net *net = sock_net(sk);
+
+ /* Allocate a bind2 bucket ahead of time to avoid permanently putting
+ * the bhash2 table in an inconsistent state if a new tb2 bucket
+ * allocation fails.
+ */
+ new_tb2 = kmem_cache_alloc(hinfo->bind2_bucket_cachep, GFP_ATOMIC);
+ if (!new_tb2)
+ return -ENOMEM;
+
+ head2 = inet_bhashfn_portaddr(hinfo, sk, net, port);
+
+ if (prev_saddr) {
+ spin_lock_bh(&prev_saddr->lock);
+ __sk_del_bind2_node(sk);
+ inet_bind2_bucket_destroy(hinfo->bind2_bucket_cachep,
+ inet_csk(sk)->icsk_bind2_hash);
+ spin_unlock_bh(&prev_saddr->lock);
+ }
+
+ spin_lock_bh(&head2->lock);
+ tb2 = inet_bind2_bucket_find(head2, net, port, l3mdev, sk);
+ if (!tb2) {
+ tb2 = new_tb2;
+ inet_bind2_bucket_init(tb2, net, head2, port, l3mdev, sk);
+ }
+ sk_add_bind2_node(sk, &tb2->owners);
+ inet_csk(sk)->icsk_bind2_hash = tb2;
+ spin_unlock_bh(&head2->lock);
+
+ if (tb2 != new_tb2)
+ kmem_cache_free(hinfo->bind2_bucket_cachep, new_tb2);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(inet_bhash2_update_saddr);
+
/* RFC 6056 3.3.4. Algorithm 4: Double-Hash Port Selection Algorithm
* Note that we use 32bit integers (vs RFC 'short integers')
* because 2^16 is not a multiple of num_ephemeral and this
@@ -694,11 +910,13 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
struct sock *, __u16, struct inet_timewait_sock **))
{
struct inet_hashinfo *hinfo = death_row->hashinfo;
+ struct inet_bind_hashbucket *head, *head2;
struct inet_timewait_sock *tw = NULL;
- struct inet_bind_hashbucket *head;
int port = inet_sk(sk)->inet_num;
struct net *net = sock_net(sk);
+ struct inet_bind2_bucket *tb2;
struct inet_bind_bucket *tb;
+ bool tb_created = false;
u32 remaining, offset;
int ret, i, low, high;
int l3mdev;
@@ -755,8 +973,7 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
* the established check is already unique enough.
*/
inet_bind_bucket_for_each(tb, &head->chain) {
- if (net_eq(ib_net(tb), net) && tb->l3mdev == l3mdev &&
- tb->port == port) {
+ if (inet_bind_bucket_match(tb, net, port, l3mdev)) {
if (tb->fastreuse >= 0 ||
tb->fastreuseport >= 0)
goto next_port;
@@ -774,6 +991,7 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
spin_unlock_bh(&head->lock);
return -ENOMEM;
}
+ tb_created = true;
tb->fastreuse = -1;
tb->fastreuseport = -1;
goto ok;
@@ -789,6 +1007,20 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
return -EADDRNOTAVAIL;
ok:
+ /* Find the corresponding tb2 bucket since we need to
+ * add the socket to the bhash2 table as well
+ */
+ head2 = inet_bhashfn_portaddr(hinfo, sk, net, port);
+ spin_lock(&head2->lock);
+
+ tb2 = inet_bind2_bucket_find(head2, net, port, l3mdev, sk);
+ if (!tb2) {
+ tb2 = inet_bind2_bucket_create(hinfo->bind2_bucket_cachep, net,
+ head2, port, l3mdev, sk);
+ if (!tb2)
+ goto error;
+ }
+
/* Here we want to add a little bit of randomness to the next source
* port that will be chosen. We use a max() with a random here so that
* on low contention the randomness is maximal and on high contention
@@ -798,7 +1030,10 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
WRITE_ONCE(table_perturb[index], READ_ONCE(table_perturb[index]) + i + 2);
/* Head lock still held and bh's disabled */
- inet_bind_hash(sk, tb, port);
+ inet_bind_hash(sk, tb, tb2, port);
+
+ spin_unlock(&head2->lock);
+
if (sk_unhashed(sk)) {
inet_sk(sk)->inet_sport = htons(port);
inet_ehash_nolisten(sk, (struct sock *)tw, NULL);
@@ -810,6 +1045,13 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
inet_twsk_deschedule_put(tw);
local_bh_enable();
return 0;
+
+error:
+ spin_unlock(&head2->lock);
+ if (tb_created)
+ inet_bind_bucket_destroy(hinfo->bind_bucket_cachep, tb);
+ spin_unlock_bh(&head->lock);
+ return -ENOMEM;
}
/*
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index ba2bdc811374..423470115088 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -4690,6 +4690,12 @@ void __init tcp_init(void)
SLAB_HWCACHE_ALIGN | SLAB_PANIC |
SLAB_ACCOUNT,
NULL);
+ tcp_hashinfo.bind2_bucket_cachep =
+ kmem_cache_create("tcp_bind2_bucket",
+ sizeof(struct inet_bind2_bucket), 0,
+ SLAB_HWCACHE_ALIGN | SLAB_PANIC |
+ SLAB_ACCOUNT,
+ NULL);
/* Size and allocate the main established and bind bucket
* hash tables.
@@ -4713,7 +4719,7 @@ void __init tcp_init(void)
panic("TCP: failed to alloc ehash_locks");
tcp_hashinfo.bhash =
alloc_large_system_hash("TCP bind",
- sizeof(struct inet_bind_hashbucket),
+ 2 * sizeof(struct inet_bind_hashbucket),
tcp_hashinfo.ehash_mask + 1,
17, /* one slot per 128 KB of memory */
0,
@@ -4722,9 +4728,12 @@ void __init tcp_init(void)
0,
64 * 1024);
tcp_hashinfo.bhash_size = 1U << tcp_hashinfo.bhash_size;
+ tcp_hashinfo.bhash2 = tcp_hashinfo.bhash + tcp_hashinfo.bhash_size;
for (i = 0; i < tcp_hashinfo.bhash_size; i++) {
spin_lock_init(&tcp_hashinfo.bhash[i].lock);
INIT_HLIST_HEAD(&tcp_hashinfo.bhash[i].chain);
+ spin_lock_init(&tcp_hashinfo.bhash2[i].lock);
+ INIT_HLIST_HEAD(&tcp_hashinfo.bhash2[i].chain);
}
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index c7e7101647dc..3b6a4bd6898e 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -199,11 +199,13 @@ static int tcp_v4_pre_connect(struct sock *sk, struct sockaddr *uaddr,
/* This will initiate an outgoing connection. */
int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
{
+ struct inet_bind_hashbucket *prev_addr_hashbucket = NULL;
struct sockaddr_in *usin = (struct sockaddr_in *)uaddr;
+ __be32 daddr, nexthop, prev_sk_rcv_saddr;
struct inet_sock *inet = inet_sk(sk);
struct tcp_sock *tp = tcp_sk(sk);
__be16 orig_sport, orig_dport;
- __be32 daddr, nexthop;
+ bool new_sk_saddr = false;
struct flowi4 *fl4;
struct rtable *rt;
int err;
@@ -246,10 +248,28 @@ int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
if (!inet_opt || !inet_opt->opt.srr)
daddr = fl4->daddr;
- if (!inet->inet_saddr)
+ if (!inet->inet_saddr) {
+ if (inet_csk(sk)->icsk_bind2_hash)
+ prev_addr_hashbucket = inet_bhashfn_portaddr(&tcp_hashinfo,
+ sk, sock_net(sk),
+ inet->inet_num);
+ prev_sk_rcv_saddr = sk->sk_rcv_saddr;
inet->inet_saddr = fl4->saddr;
+ new_sk_saddr = true;
+ }
+
sk_rcv_saddr_set(sk, inet->inet_saddr);
+ if (new_sk_saddr) {
+ err = inet_bhash2_update_saddr(prev_addr_hashbucket, sk);
+ if (err) {
+ inet->inet_saddr = 0;
+ sk_rcv_saddr_set(sk, prev_sk_rcv_saddr);
+ ip_rt_put(rt);
+ return err;
+ }
+ }
+
if (tp->rx_opt.ts_recent_stamp && inet->inet_daddr != daddr) {
/* Reset inherited state */
tp->rx_opt.ts_recent = 0;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 85b8b765dcb1..4573d6a30ea6 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -287,8 +287,21 @@ static int tcp_v6_connect(struct sock *sk, struct sockaddr *uaddr,
}
if (!saddr) {
+ struct inet_bind_hashbucket *prev_addr_hashbucket = NULL;
+ struct in6_addr prev_v6_rcv_saddr = sk->sk_v6_rcv_saddr;
+
+ if (icsk->icsk_bind2_hash)
+ prev_addr_hashbucket = inet_bhashfn_portaddr(&tcp_hashinfo,
+ sk, sock_net(sk),
+ inet->inet_num);
saddr = &fl6.saddr;
sk->sk_v6_rcv_saddr = *saddr;
+
+ err = inet_bhash2_update_saddr(prev_addr_hashbucket, sk);
+ if (err) {
+ sk->sk_v6_rcv_saddr = prev_v6_rcv_saddr;
+ goto failure;
+ }
}
/* set the source address */
--
2.30.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next v3 2/3] selftests/net: Add test for timing a bind request to a port with a populated bhash entry
2022-07-22 19:54 [PATCH net-next v3 0/3] Add a second bind table hashed by port + address Joanne Koong
2022-07-22 19:54 ` [PATCH net-next v3 1/3] net: Add a bhash2 " Joanne Koong
@ 2022-07-22 19:54 ` Joanne Koong
2022-07-22 19:54 ` [PATCH net-next v3 3/3] selftests/net: Add sk_bind_sendto_listen and sk_connect_zero_addr Joanne Koong
2 siblings, 0 replies; 21+ messages in thread
From: Joanne Koong @ 2022-07-22 19:54 UTC (permalink / raw)
To: netdev; +Cc: pabeni, edumazet, kuba, kafai, davem, Joanne Koong
This test populates the bhash table for a given port with
MAX_THREADS * MAX_CONNECTIONS sockets, and then times how long
a bind request on the port takes.
When populating the bhash table, we create the sockets and then bind
the sockets to the same address and port (SO_REUSEADDR and SO_REUSEPORT
are set). When timing how long a bind on the port takes, we bind on a
different address without SO_REUSEPORT set. We do not set SO_REUSEPORT
because we are interested in the case where the bind request does not
go through the tb->fastreuseport path, which is fragile (eg
tb->fastreuseport path does not work if binding with a different uid).
To run the script:
Usage: ./bind_bhash.sh [-6 | -4] [-p port] [-a address]
6: use ipv6
4: use ipv4
port: Port number
address: ip address
Without any arguments, ./bind_bhash.sh defaults to ipv6 using ip address
"2001:0db8:0:f101::1" on port 443.
On my local machine, I see:
ipv4:
before - 0.002317 seconds
with bhash2 - 0.000020 seconds
ipv6:
before - 0.002431 seconds
with bhash2 - 0.000021 seconds
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
---
tools/testing/selftests/net/.gitignore | 3 +-
tools/testing/selftests/net/Makefile | 3 +
tools/testing/selftests/net/bind_bhash.c | 144 ++++++++++++++++++++++
tools/testing/selftests/net/bind_bhash.sh | 66 ++++++++++
4 files changed, 215 insertions(+), 1 deletion(-)
create mode 100644 tools/testing/selftests/net/bind_bhash.c
create mode 100755 tools/testing/selftests/net/bind_bhash.sh
diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore
index 892306bdb47d..04c4c4152970 100644
--- a/tools/testing/selftests/net/.gitignore
+++ b/tools/testing/selftests/net/.gitignore
@@ -38,4 +38,5 @@ ioam6_parser
toeplitz
tun
cmsg_sender
-unix_connect
\ No newline at end of file
+unix_connect
+bind_bhash
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 80628bf8413a..6b621bcbcb8e 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -40,6 +40,7 @@ TEST_PROGS += arp_ndisc_evict_nocarrier.sh
TEST_PROGS += ndisc_unsolicited_na_test.sh
TEST_PROGS += arp_ndisc_untracked_subnets.sh
TEST_PROGS += stress_reuseport_listen.sh
+TEST_PROGS += bind_bhash.sh
TEST_PROGS_EXTENDED := in_netns.sh setup_loopback.sh setup_veth.sh
TEST_PROGS_EXTENDED += toeplitz_client.sh toeplitz.sh
TEST_GEN_FILES = socket nettest
@@ -60,6 +61,7 @@ TEST_GEN_FILES += toeplitz
TEST_GEN_FILES += cmsg_sender
TEST_GEN_FILES += stress_reuseport_listen
TEST_PROGS += test_vxlan_vnifiltering.sh
+TEST_GEN_FILES += bind_bhash
TEST_FILES := settings
@@ -71,3 +73,4 @@ include bpf/Makefile
$(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma
$(OUTPUT)/tcp_mmap: LDLIBS += -lpthread
$(OUTPUT)/tcp_inq: LDLIBS += -lpthread
+$(OUTPUT)/bind_bhash: LDLIBS += -lpthread
diff --git a/tools/testing/selftests/net/bind_bhash.c b/tools/testing/selftests/net/bind_bhash.c
new file mode 100644
index 000000000000..57ff67a3751e
--- /dev/null
+++ b/tools/testing/selftests/net/bind_bhash.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This times how long it takes to bind to a port when the port already
+ * has multiple sockets in its bhash table.
+ *
+ * In the setup(), we populate the port's bhash table with
+ * MAX_THREADS * MAX_CONNECTIONS number of entries.
+ */
+
+#include <unistd.h>
+#include <stdio.h>
+#include <netdb.h>
+#include <pthread.h>
+#include <string.h>
+#include <stdbool.h>
+
+#define MAX_THREADS 600
+#define MAX_CONNECTIONS 40
+
+static const char *setup_addr_v6 = "::1";
+static const char *setup_addr_v4 = "127.0.0.1";
+static const char *setup_addr;
+static const char *bind_addr;
+static const char *port;
+bool use_v6;
+int ret;
+
+static int fd_array[MAX_THREADS][MAX_CONNECTIONS];
+
+static int bind_socket(int opt, const char *addr)
+{
+ struct addrinfo *res, hint = {};
+ int sock_fd, reuse = 1, err;
+ int domain = use_v6 ? AF_INET6 : AF_INET;
+
+ sock_fd = socket(domain, SOCK_STREAM, 0);
+ if (sock_fd < 0) {
+ perror("socket fd err");
+ return sock_fd;
+ }
+
+ hint.ai_family = domain;
+ hint.ai_socktype = SOCK_STREAM;
+
+ err = getaddrinfo(addr, port, &hint, &res);
+ if (err) {
+ perror("getaddrinfo failed");
+ goto cleanup;
+ }
+
+ if (opt) {
+ err = setsockopt(sock_fd, SOL_SOCKET, opt, &reuse, sizeof(reuse));
+ if (err) {
+ perror("setsockopt failed");
+ goto cleanup;
+ }
+ }
+
+ err = bind(sock_fd, res->ai_addr, res->ai_addrlen);
+ if (err) {
+ perror("failed to bind to port");
+ goto cleanup;
+ }
+
+ return sock_fd;
+
+cleanup:
+ close(sock_fd);
+ return err;
+}
+
+static void *setup(void *arg)
+{
+ int sock_fd, i;
+ int *array = (int *)arg;
+
+ for (i = 0; i < MAX_CONNECTIONS; i++) {
+ sock_fd = bind_socket(SO_REUSEADDR | SO_REUSEPORT, setup_addr);
+ if (sock_fd < 0) {
+ ret = sock_fd;
+ pthread_exit(&ret);
+ }
+ array[i] = sock_fd;
+ }
+
+ return NULL;
+}
+
+int main(int argc, const char *argv[])
+{
+ int listener_fd, sock_fd, i, j;
+ pthread_t tid[MAX_THREADS];
+ clock_t begin, end;
+
+ if (argc != 4) {
+ printf("Usage: listener <port> <ipv6 | ipv4> <bind-addr>\n");
+ return -1;
+ }
+
+ port = argv[1];
+ use_v6 = strcmp(argv[2], "ipv6") == 0;
+ bind_addr = argv[3];
+
+ setup_addr = use_v6 ? setup_addr_v6 : setup_addr_v4;
+
+ listener_fd = bind_socket(SO_REUSEADDR | SO_REUSEPORT, setup_addr);
+ if (listen(listener_fd, 100) < 0) {
+ perror("listen failed");
+ return -1;
+ }
+
+ /* Set up threads to populate the bhash table entry for the port */
+ for (i = 0; i < MAX_THREADS; i++)
+ pthread_create(&tid[i], NULL, setup, fd_array[i]);
+
+ for (i = 0; i < MAX_THREADS; i++)
+ pthread_join(tid[i], NULL);
+
+ if (ret)
+ goto done;
+
+ begin = clock();
+
+ /* Bind to the same port on a different address */
+ sock_fd = bind_socket(0, bind_addr);
+ if (sock_fd < 0)
+ goto done;
+
+ end = clock();
+
+ printf("time spent = %f\n", (double)(end - begin) / CLOCKS_PER_SEC);
+
+ /* clean up */
+ close(sock_fd);
+
+done:
+ close(listener_fd);
+ for (i = 0; i < MAX_THREADS; i++) {
+ for (j = 0; i < MAX_THREADS; i++)
+ close(fd_array[i][j]);
+ }
+
+ return 0;
+}
diff --git a/tools/testing/selftests/net/bind_bhash.sh b/tools/testing/selftests/net/bind_bhash.sh
new file mode 100755
index 000000000000..ca0292d4b441
--- /dev/null
+++ b/tools/testing/selftests/net/bind_bhash.sh
@@ -0,0 +1,66 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+NR_FILES=32768
+SAVED_NR_FILES=$(ulimit -n)
+
+# default values
+port=443
+addr_v6="2001:0db8:0:f101::1"
+addr_v4="10.8.8.8"
+use_v6=true
+addr=""
+
+usage() {
+ echo "Usage: $0 [-6 | -4] [-p port] [-a address]"
+ echo -e "\t6: use ipv6"
+ echo -e "\t4: use ipv4"
+ echo -e "\tport: Port number"
+ echo -e "\taddress: ip address"
+}
+
+while getopts "ha:p:64" opt; do
+ case ${opt} in
+ h)
+ usage $0
+ exit 0
+ ;;
+ a) addr=$OPTARG;;
+ p)
+ port=$OPTARG;;
+ 6)
+ use_v6=true;;
+ 4)
+ use_v6=false;;
+ esac
+done
+
+setup() {
+ if [[ "$use_v6" == true ]]; then
+ ip addr add $addr_v6 nodad dev eth0
+ else
+ ip addr add $addr_v4 dev lo
+ fi
+ ulimit -n $NR_FILES
+}
+
+cleanup() {
+ if [[ "$use_v6" == true ]]; then
+ ip addr del $addr_v6 dev eth0
+ else
+ ip addr del $addr_v4/32 dev lo
+ fi
+ ulimit -n $SAVED_NR_FILES
+}
+
+if [[ "$addr" != "" ]]; then
+ addr_v4=$addr;
+ addr_v6=$addr;
+fi
+setup
+if [[ "$use_v6" == true ]] ; then
+ ./bind_bhash $port "ipv6" $addr_v6
+else
+ ./bind_bhash $port "ipv4" $addr_v4
+fi
+cleanup
--
2.30.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH net-next v3 3/3] selftests/net: Add sk_bind_sendto_listen and sk_connect_zero_addr
2022-07-22 19:54 [PATCH net-next v3 0/3] Add a second bind table hashed by port + address Joanne Koong
2022-07-22 19:54 ` [PATCH net-next v3 1/3] net: Add a bhash2 " Joanne Koong
2022-07-22 19:54 ` [PATCH net-next v3 2/3] selftests/net: Add test for timing a bind request to a port with a populated bhash entry Joanne Koong
@ 2022-07-22 19:54 ` Joanne Koong
2 siblings, 0 replies; 21+ messages in thread
From: Joanne Koong @ 2022-07-22 19:54 UTC (permalink / raw)
To: netdev; +Cc: pabeni, edumazet, kuba, kafai, davem, Joanne Koong
This patch adds 2 new tests: sk_bind_sendto_listen and
sk_connect_zero_addr.
The sk_bind_sendto_listen test exercises the path where a socket's
rcv saddr changes after it has been added to the binding tables,
and then a listen() on the socket is invoked. The listen() should
succeed.
The sk_bind_sendto_listen test is copied over from one of syzbot's
tests: https://syzkaller.appspot.com/x/repro.c?x=1673a38df00000
The sk_connect_zero_addr test exercises the path where the socket was
never previously added to the binding tables and it gets assigned a
saddr upon a connect() to address 0.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
---
tools/testing/selftests/net/.gitignore | 2 +
tools/testing/selftests/net/Makefile | 2 +
.../selftests/net/sk_bind_sendto_listen.c | 80 +++++++++++++++++++
.../selftests/net/sk_connect_zero_addr.c | 57 +++++++++++++
4 files changed, 141 insertions(+)
create mode 100644 tools/testing/selftests/net/sk_bind_sendto_listen.c
create mode 100644 tools/testing/selftests/net/sk_connect_zero_addr.c
diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore
index 04c4c4152970..7e1d358929a6 100644
--- a/tools/testing/selftests/net/.gitignore
+++ b/tools/testing/selftests/net/.gitignore
@@ -40,3 +40,5 @@ tun
cmsg_sender
unix_connect
bind_bhash
+sk_bind_sendto_listen
+sk_connect_zero_addr
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 6b621bcbcb8e..a4d9d4ab456d 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -62,6 +62,8 @@ TEST_GEN_FILES += cmsg_sender
TEST_GEN_FILES += stress_reuseport_listen
TEST_PROGS += test_vxlan_vnifiltering.sh
TEST_GEN_FILES += bind_bhash
+TEST_GEN_PROGS += sk_bind_sendto_listen
+TEST_GEN_PROGS += sk_connect_zero_addr
TEST_FILES := settings
diff --git a/tools/testing/selftests/net/sk_bind_sendto_listen.c b/tools/testing/selftests/net/sk_bind_sendto_listen.c
new file mode 100644
index 000000000000..b420d830f72c
--- /dev/null
+++ b/tools/testing/selftests/net/sk_bind_sendto_listen.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <arpa/inet.h>
+#include <error.h>
+#include <errno.h>
+#include <unistd.h>
+
+int main(void)
+{
+ int fd1, fd2, one = 1;
+ struct sockaddr_in6 bind_addr = {
+ .sin6_family = AF_INET6,
+ .sin6_port = htons(20000),
+ .sin6_flowinfo = htonl(0),
+ .sin6_addr = {},
+ .sin6_scope_id = 0,
+ };
+
+ inet_pton(AF_INET6, "::", &bind_addr.sin6_addr);
+
+ fd1 = socket(AF_INET6, SOCK_STREAM, IPPROTO_IP);
+ if (fd1 < 0) {
+ error(1, errno, "socket fd1");
+ return -1;
+ }
+
+ if (setsockopt(fd1, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one))) {
+ error(1, errno, "setsockopt(SO_REUSEADDR) fd1");
+ goto out_err1;
+ }
+
+ if (bind(fd1, (struct sockaddr *)&bind_addr, sizeof(bind_addr))) {
+ error(1, errno, "bind fd1");
+ goto out_err1;
+ }
+
+ if (sendto(fd1, NULL, 0, MSG_FASTOPEN, (struct sockaddr *)&bind_addr,
+ sizeof(bind_addr))) {
+ error(1, errno, "sendto fd1");
+ goto out_err1;
+ }
+
+ fd2 = socket(AF_INET6, SOCK_STREAM, IPPROTO_IP);
+ if (fd2 < 0) {
+ error(1, errno, "socket fd2");
+ goto out_err1;
+ }
+
+ if (setsockopt(fd2, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one))) {
+ error(1, errno, "setsockopt(SO_REUSEADDR) fd2");
+ goto out_err2;
+ }
+
+ if (bind(fd2, (struct sockaddr *)&bind_addr, sizeof(bind_addr))) {
+ error(1, errno, "bind fd2");
+ goto out_err2;
+ }
+
+ if (sendto(fd2, NULL, 0, MSG_FASTOPEN, (struct sockaddr *)&bind_addr,
+ sizeof(bind_addr)) != -1) {
+ error(1, errno, "sendto fd2");
+ goto out_err2;
+ }
+
+ if (listen(fd2, 0)) {
+ error(1, errno, "listen");
+ goto out_err2;
+ }
+
+ close(fd2);
+ close(fd1);
+ return 0;
+
+out_err2:
+ close(fd2);
+
+out_err1:
+ close(fd1);
+ return -1;
+}
diff --git a/tools/testing/selftests/net/sk_connect_zero_addr.c b/tools/testing/selftests/net/sk_connect_zero_addr.c
new file mode 100644
index 000000000000..7857da5ac3f8
--- /dev/null
+++ b/tools/testing/selftests/net/sk_connect_zero_addr.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <arpa/inet.h>
+#include <error.h>
+#include <errno.h>
+#include <unistd.h>
+
+int main(void)
+{
+ int fd1, fd2;
+ struct sockaddr_in6 bind_addr = {
+ .sin6_family = AF_INET6,
+ .sin6_port = htons(20000),
+ .sin6_flowinfo = htonl(0),
+ .sin6_addr = {},
+ .sin6_scope_id = 0,
+ };
+
+ inet_pton(AF_INET6, "::", &bind_addr.sin6_addr);
+
+ fd1 = socket(AF_INET6, SOCK_STREAM, IPPROTO_IP);
+ if (fd1 < 0) {
+ error(1, errno, "socket fd1");
+ return -1;
+ }
+
+ if (bind(fd1, (struct sockaddr *)&bind_addr, sizeof(bind_addr))) {
+ error(1, errno, "bind fd1");
+ goto out_err1;
+ }
+
+ if (listen(fd1, 0)) {
+ error(1, errno, "listen");
+ goto out_err1;
+ }
+
+ fd2 = socket(AF_INET6, SOCK_STREAM, IPPROTO_IP);
+ if (fd2 < 0) {
+ error(1, errno, "socket fd2");
+ goto out_err1;
+ }
+
+ if (connect(fd2, (struct sockaddr *)&bind_addr, sizeof(bind_addr))) {
+ error(1, errno, "bind fd2");
+ goto out_err2;
+ }
+
+ close(fd2);
+ close(fd1);
+ return 0;
+
+out_err2:
+ close(fd2);
+out_err1:
+ close(fd1);
+ return -1;
+}
--
2.30.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [net] 03d56978dd: BUG:Bad_page_map_in_process
2022-07-22 19:54 ` [PATCH net-next v3 1/3] net: Add a bhash2 " Joanne Koong
@ 2022-07-25 16:58 ` kernel test robot
2022-07-31 18:46 ` [PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address kernel test robot
1 sibling, 0 replies; 21+ messages in thread
From: kernel test robot @ 2022-07-24 14:04 UTC (permalink / raw)
To: Joanne Koong
Cc: 0day robot, LKML, netdev, dccp, lkp, pabeni, edumazet, kuba,
kafai, davem, Joanne Koong
[-- Attachment #1: Type: text/plain, Size: 6067 bytes --]
Greeting,
FYI, we noticed the following commit (built with gcc-11):
commit: 03d56978dd246147e151916e4dc72af7bc24d5c9 ("[PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address")
url: https://github.com/intel-lab-lkp/linux/commits/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
base: https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git 949d6b405e6160ae44baea39192d67b39cb7eeac
patch link: https://lore.kernel.org/netdev/20220722195406.1304948-2-joannelkoong@gmail.com
in testcase: boot
on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
If you fix the issue, kindly add following tag
Reported-by: kernel test robot <oliver.sang@intel.com>
[ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
[ 103.873143][ T486] addr:00007f9fe52a2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f928adcb58 index:1a1
[ 103.875128][ T486] file:libcrypto.so.1.1 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
[ 103.877339][ T486] CPU: 0 PID: 486 Comm: rsync Not tainted 5.19.0-rc7-01443-g03d56978dd24 #1
[ 103.879032][ T486] Call Trace:
[ 103.879742][ T486] <TASK>
[ 103.880329][ T486] ? simple_write_end+0x140/0x140
[ 103.881338][ T486] dump_stack_lvl+0x3b/0x53
[ 103.882274][ T486] ? __filemap_get_folio+0x780/0x780
[ 103.883270][ T486] print_bad_pte.cold+0x15b/0x1c5
[ 103.884202][ T486] vm_normal_page+0x65/0x140
[ 103.885062][ T486] zap_pte_range+0x23b/0x9c0
[ 103.885897][ T486] unmap_page_range+0x263/0x5c0
[ 103.886846][ T486] unmap_vmas+0x121/0x200
[ 103.887628][ T486] exit_mmap+0xb5/0x240
[ 103.888401][ T486] mmput+0x3b/0x140
[ 103.889134][ T486] exit_mm+0xff/0x180
[ 103.889877][ T486] do_exit+0x100/0x400
[ 103.890661][ T486] do_group_exit+0x3e/0x100
[ 103.891514][ T486] __x64_sys_exit_group+0x18/0x40
[ 103.892494][ T486] do_syscall_64+0x5d/0x80
[ 103.893294][ T486] ? do_user_addr_fault+0x257/0x6c0
[ 103.894238][ T486] ? lock_release+0x6e/0x100
[ 103.895171][ T486] ? up_read+0x12/0x40
[ 103.896036][ T486] ? exc_page_fault+0xb2/0x2c0
[ 103.897021][ T486] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
[ 103.898243][ T486] RIP: 0033:0x7f9fe5007699
[ 103.899149][ T486] Code: Unable to access opcode bytes at RIP 0x7f9fe500766f.
[ 103.900511][ T486] RSP: 002b:00007fff7e32c3a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[ 103.902027][ T486] RAX: ffffffffffffffda RBX: 00007f9fe50fc610 RCX: 00007f9fe5007699
[ 103.903477][ T486] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
[ 103.904943][ T486] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
[ 103.906384][ T486] R10: 000000000000000b R11: 0000000000000246 R12: 00007f9fe50fc610
[ 103.907823][ T486] R13: 0000000000000001 R14: 00007f9fe50fcae8 R15: 0000000000000000
[ 103.909290][ T486] </TASK>
[ 103.910423][ T486] Disabling lock debugging due to kernel taint
[ 107.503093][ T508] BUG: Bad page map in process rsync pte:ffff92f93b7fe508 pmd:13aa1c067
[ 107.504948][ T508] addr:00007fced9aa2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f92891ab58 index:9a
[ 107.507070][ T508] file:libzstd.so.1.4.8 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
[ 107.508825][ T508] CPU: 0 PID: 508 Comm: rsync Tainted: G B 5.19.0-rc7-01443-g03d56978dd24 #1
[ 107.510762][ T508] Call Trace:
[ 107.511458][ T508] <TASK>
[ 107.512058][ T508] ? simple_write_end+0x140/0x140
[ 107.513072][ T508] dump_stack_lvl+0x3b/0x53
[ 107.513990][ T508] ? __filemap_get_folio+0x780/0x780
[ 107.519166][ T508] print_bad_pte.cold+0x15b/0x1c5
[ 107.520032][ T508] vm_normal_page+0x65/0x140
[ 107.520802][ T508] zap_pte_range+0x23b/0x9c0
[ 107.521548][ T508] unmap_page_range+0x263/0x5c0
[ 107.522355][ T508] unmap_vmas+0x121/0x200
[ 107.523247][ T508] exit_mmap+0xb5/0x240
[ 107.524107][ T508] mmput+0x3b/0x140
[ 107.524908][ T508] exit_mm+0xff/0x180
[ 107.525716][ T508] do_exit+0x100/0x400
[ 107.526613][ T508] do_group_exit+0x3e/0x100
[ 107.527541][ T508] __x64_sys_exit_group+0x18/0x40
[ 107.528450][ T508] do_syscall_64+0x5d/0x80
[ 107.529368][ T508] ? up_read+0x12/0x40
[ 107.530228][ T508] ? do_user_addr_fault+0x257/0x6c0
[ 107.531121][ T508] ? rcu_read_lock_sched_held+0x5/0x40
[ 107.532046][ T508] ? exc_page_fault+0xb2/0x2c0
[ 107.532843][ T508] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
[ 107.533866][ T508] RIP: 0033:0x7fced95ff699
[ 107.534781][ T508] Code: Unable to access opcode bytes at RIP 0x7fced95ff66f.
[ 107.536225][ T508] RSP: 002b:00007fff162474c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[ 107.537871][ T508] RAX: ffffffffffffffda RBX: 00007fced96f4610 RCX: 00007fced95ff699
[ 107.539506][ T508] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
[ 107.541126][ T508] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
[ 107.542743][ T508] R10: 000000000000000b R11: 0000000000000246 R12: 00007fced96f4610
[ 107.544310][ T508] R13: 0000000000000001 R14: 00007fced96f4ae8 R15: 0000000000000000
[ 107.545881][ T508] </TASK>
To reproduce:
# build kernel
cd linux
cp config-5.19.0-rc7-01443-g03d56978dd24 .config
make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
cd <mod-install-dir>
find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
# if come across any failure that blocks the test,
# please remove ~/.lkp and /lkp dir to run from a clean state.
--
0-DAY CI Kernel Test Service
https://01.org/lkp
[-- Attachment #2: config-5.19.0-rc7-01443-g03d56978dd24 --]
[-- Type: text/plain, Size: 124837 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.19.0-rc7 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-11 (Debian 11.3.0-3) 11.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=110300
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_JIT is not set
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_DYNAMIC is not set
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_FORCE_TASKS_RCU=y
CONFIG_TASKS_RCU=y
CONFIG_FORCE_TASKS_RUDE_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_FORCE_TASKS_TRACE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_TASKS_TRACE_RCU_READ_MB=y
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_BPF is not set
# CONFIG_CGROUP_MISC is not set
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_NAMESPACES is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
CONFIG_RD_XZ=y
# CONFIG_RD_LZO is not set
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
# CONFIG_POSIX_TIMERS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
# CONFIG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_NR_GPIO=1024
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
# CONFIG_SMP is not set
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
CONFIG_GOLDFISH=y
# CONFIG_X86_CPU_RESCTRL is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_MID=y
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_X86_HV_CALLBACK_VECTOR=y
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_JAILHOUSE_GUEST=y
# CONFIG_ACRN_GUEST is not set
# CONFIG_INTEL_TDX_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
# CONFIG_CPU_SUP_AMD is not set
# CONFIG_CPU_SUP_HYGON is not set
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_CPU_SUP_ZHAOXIN is not set
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
CONFIG_BOOT_VESA_SUPPORT=y
CONFIG_NR_CPUS_RANGE_BEGIN=1
CONFIG_NR_CPUS_RANGE_END=1
CONFIG_NR_CPUS_DEFAULT=1
CONFIG_NR_CPUS=1
CONFIG_UP_LATE_INIT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_INJECT is not set
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# end of Performance monitoring
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_X86_IOPL_IOPERM is not set
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_LATE_LOADING is not set
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_X86_CPA_STATISTICS=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
# CONFIG_MTRR is not set
# CONFIG_ARCH_RANDOM is not set
# CONFIG_X86_UMIP is not set
CONFIG_CC_HAS_IBT=y
# CONFIG_X86_KERNEL_IBT is not set
# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_X86_SGX is not set
# CONFIG_EFI is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_KEXEC is not set
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
CONFIG_KEXEC_SIG=y
CONFIG_KEXEC_SIG_FORCE=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0x0
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_XONLY=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
CONFIG_STRICT_SIGALTSTACK_SIZE=y
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features
CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
CONFIG_SPECULATION_MITIGATIONS=y
# CONFIG_PAGE_TABLE_ISOLATION is not set
# CONFIG_RETPOLINE is not set
CONFIG_CPU_IBRS_ENTRY=y
# CONFIG_SLS is not set
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_FPDT is not set
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_TAD is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_IPMI is not set
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_ACPI_DPTF is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_ACPI_PFRUT is not set
# CONFIG_PMIC_OPREGION is not set
CONFIG_X86_PM_TIMER=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_CPU_IDLE_GOV_MENU is not set
CONFIG_CPU_IDLE_GOV_TEO=y
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle
# CONFIG_INTEL_IDLE is not set
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_ISA_BUS=y
CONFIG_ISA_DMA_API=y
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32_ABI is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
# end of Binary Emulations
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_GENERIC_ENTRY=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_JUMP_LABEL_HACK=y
CONFIG_HAVE_NOINSTR_HACK=y
CONFIG_HAVE_NOINSTR_VALIDATION=y
CONFIG_HAVE_UACCESS_VALIDATION=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_ISA_BUS_API=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_PROFILE_ALL is not set
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
# CONFIG_ACORN_PARTITION_ADFS is not set
CONFIG_ACORN_PARTITION_POWERTEC=y
# CONFIG_ACORN_PARTITION_RISCIX is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
CONFIG_MQ_IOSCHED_KYBER=m
CONFIG_IOSCHED_BFQ=m
# end of IO Schedulers
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
# CONFIG_COREDUMP is not set
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SWAP=y
# CONFIG_ZSWAP is not set
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# end of SLAB allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_COMPAT_BRK=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_DEBUGFS=y
# CONFIG_CMA_SYSFS is not set
CONFIG_CMA_AREAS=7
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_VM_GET_PAGE_PROT=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_HMM_MIRROR=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# CONFIG_USERFAULTFD is not set
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_SMC=m
CONFIG_SMC_DIAG=m
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=m
# CONFIG_IP_MROUTE is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_NET_FOU=m
CONFIG_INET_AH=m
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
# CONFIG_NETFILTER is not set
# CONFIG_BPFILTER is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y
# end of DCCP CCIDs Configuration
#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
# end of DCCP Kernel Hacking
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=y
# CONFIG_ATM_CLIP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
# CONFIG_ATM_BR2684 is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
# CONFIG_L2TP_V3 is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
# CONFIG_IPDDP is not set
# CONFIG_X25 is not set
CONFIG_LAPB=m
CONFIG_PHONET=m
CONFIG_IEEE802154=m
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=m
# CONFIG_MAC802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=m
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
CONFIG_NET_SCH_ETF=y
CONFIG_NET_SCH_TAPRIO=m
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_SKBPRIO=m
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=m
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_PLUG=y
CONFIG_NET_SCH_ETS=y
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=m
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
CONFIG_NET_CLS_MATCHALL=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_BATMAN_V is not set
# CONFIG_BATMAN_ADV_BLA is not set
CONFIG_BATMAN_ADV_DAT=y
# CONFIG_BATMAN_ADV_NC is not set
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_BATMAN_ADV_DEBUG=y
# CONFIG_BATMAN_ADV_TRACING is not set
CONFIG_OPENVSWITCH=m
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
CONFIG_NET_NSH=m
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
CONFIG_QRTR=m
# CONFIG_QRTR_SMD is not set
# CONFIG_QRTR_TUN is not set
CONFIG_NET_NCSI=y
CONFIG_NCSI_OEM_CMD_GET_MAC=y
# CONFIG_NCSI_OEM_CMD_KEEP_PHY is not set
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_BT=m
# CONFIG_BT_BREDR is not set
CONFIG_BT_LE=y
# CONFIG_BT_LEDS is not set
# CONFIG_BT_MSFTEXT is not set
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
# CONFIG_BT_FEATURE_DEBUG is not set
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
# CONFIG_BT_MTKUART is not set
CONFIG_BT_VIRTIO=m
# end of Bluetooth device drivers
# CONFIG_AF_RXRPC is not set
CONFIG_AF_KCM=y
CONFIG_STREAM_PARSER=y
CONFIG_MCTP=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_RDMA=m
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
# CONFIG_CAIF_NETDEV is not set
CONFIG_CAIF_USB=m
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
# CONFIG_NFC is not set
CONFIG_PSAMPLE=y
CONFIG_NET_IFE=m
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=y
# CONFIG_ETHTOOL_NETLINK is not set
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIEASPM is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=m
CONFIG_PCI_PF_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
CONFIG_PCIE_BUS_TUNE_OFF=y
# CONFIG_PCIE_BUS_DEFAULT is not set
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
# CONFIG_VGA_ARB is not set
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
CONFIG_PCI_HOST_COMMON=y
# CONFIG_PCI_HOST_GENERIC is not set
CONFIG_PCIE_XILINX=y
CONFIG_VMD=m
CONFIG_PCIE_MICROCHIP_HOST=y
#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_EP=y
CONFIG_PCIE_DW_PLAT=y
# CONFIG_PCIE_DW_PLAT_HOST is not set
CONFIG_PCIE_DW_PLAT_EP=y
CONFIG_PCIE_INTEL_GW=y
CONFIG_PCI_MESON=y
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_PLAT=y
CONFIG_PCIE_CADENCE_PLAT_HOST=y
# CONFIG_PCIE_CADENCE_PLAT_EP is not set
CONFIG_PCI_J721E=y
CONFIG_PCI_J721E_HOST=y
# CONFIG_PCI_J721E_EP is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
# CONFIG_PCI_EPF_TEST is not set
# CONFIG_PCI_EPF_NTB is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=m
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
# CONFIG_YENTA_ENE_TUNE is not set
CONFIG_YENTA_TOSHIBA=y
CONFIG_RAPIDIO=m
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
# CONFIG_RAPIDIO_DMA_ENGINE is not set
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=m
CONFIG_RAPIDIO_CHMAN=m
CONFIG_RAPIDIO_MPORT_CDEV=m
#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_CPS_XX=m
CONFIG_RAPIDIO_CPS_GEN2=m
# CONFIG_RAPIDIO_RXS_GEN3 is not set
# end of RapidIO Switch drivers
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set
# CONFIG_FW_CACHE is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_W1=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=m
CONFIG_REGMAP_SOUNDWIRE_MBQ=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
CONFIG_CONNECTOR=m
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol
# CONFIG_EDD is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_SYSFB=y
CONFIG_SYSFB_SIMPLEFB=y
CONFIG_CS_DSP=m
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
# CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is not set
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_FD_RAWCMD is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
# CONFIG_ZRAM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
CONFIG_BLK_DEV_RNBD=y
CONFIG_BLK_DEV_RNBD_CLIENT=m
#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
CONFIG_NVME_FABRICS=m
CONFIG_NVME_RDMA=m
CONFIG_NVME_FC=m
# CONFIG_NVME_TCP is not set
CONFIG_NVME_TARGET=y
# CONFIG_NVME_TARGET_PASSTHRU is not set
# CONFIG_NVME_TARGET_LOOP is not set
CONFIG_NVME_TARGET_RDMA=m
CONFIG_NVME_TARGET_FC=y
CONFIG_NVME_TARGET_FCLOOP=m
CONFIG_NVME_TARGET_TCP=m
# end of NVME Support
#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
CONFIG_DUMMY_IRQ=y
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
CONFIG_DS1682=m
CONFIG_VMWARE_BALLOON=y
# CONFIG_SRAM is not set
CONFIG_DW_XDATA_PCIE=y
# CONFIG_PCI_ENDPOINT_TEST is not set
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=m
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=m
CONFIG_EEPROM_EE1004=y
# end of EEPROM support
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=m
# CONFIG_INTEL_MEI_ME is not set
CONFIG_INTEL_MEI_TXE=m
CONFIG_VMWARE_VMCI=y
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
CONFIG_MISC_ALCOR_PCI=m
CONFIG_MISC_RTSX_PCI=y
CONFIG_HABANA_AI=m
CONFIG_UACCE=y
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=m
CONFIG_PVPANIC_PCI=m
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
# CONFIG_SCSI is not set
# end of SCSI device support
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BCACHE=m
CONFIG_BCACHE_DEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
# CONFIG_BCACHE_ASYNC_REGISTRATION is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
CONFIG_DM_EBS=m
CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
CONFIG_DM_DELAY=m
CONFIG_DM_DUST=m
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=y
# CONFIG_TCM_USER2 is not set
CONFIG_ISCSI_TARGET=y
CONFIG_SBP_TARGET=m
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
# CONFIG_FIREWIRE_OHCI is not set
# CONFIG_FIREWIRE_NET is not set
CONFIG_FIREWIRE_NOSY=y
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_RIONET is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
# CONFIG_CAIF_DRIVERS is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_CX_ECAT is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
CONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_TXGBE is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_LITEX=y
# CONFIG_LITEX_LITEETH is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_OCTEON_EP is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000_UART is not set
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
#
# MCTP Device Drivers
#
# CONFIG_MCTP_SERIAL is not set
# CONFIG_MCTP_TRANSPORT_I2C is not set
# end of MCTP Device Drivers
# CONFIG_MDIO_DEVICE is not set
#
# PCS device drivers
#
# end of PCS device drivers
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
CONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_STMPE is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_PS2_SMBUS=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
# CONFIG_SERIAL_8250_MEN_MCB is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_ASPEED_VUART is not set
CONFIG_SERIAL_8250_DWLIB=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y
# CONFIG_SERIAL_OF_PLATFORM is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_MEN_Z135 is not set
# CONFIG_SERIAL_SPRD is not set
# CONFIG_SERIAL_LITEUART is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_GOLDFISH_TTY is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
# CONFIG_RPMSG_TTY is not set
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_IPMB=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_IPMB_DEVICE_INTERFACE=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_BA431=y
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_CCTRNG is not set
CONFIG_HW_RANDOM_XIPHERA=y
CONFIG_APPLICOM=m
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=m
# CONFIG_XILLYBUS is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_GPMUX=m
# CONFIG_I2C_MUX_LTC4306 is not set
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_MUX_REG=m
CONFIG_I2C_DEMUX_PINCTRL=m
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=y
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=y
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NFORCE2_S4985=y
# CONFIG_I2C_NVIDIA_GPU is not set
CONFIG_I2C_SIS5595=m
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=m
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_AMDPSP is not set
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_EMEV2=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=y
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=y
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=m
CONFIG_I2C_SLAVE_TESTUNIT=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=m
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_DA9062 is not set
# CONFIG_PINCTRL_EQUILIBRIUM is not set
# CONFIG_PINCTRL_MAX77620 is not set
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08=m
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
# CONFIG_PINCTRL_OCELOT is not set
CONFIG_PINCTRL_PALMAS=m
CONFIG_PINCTRL_RK805=y
# CONFIG_PINCTRL_SINGLE is not set
# CONFIG_PINCTRL_STMFX is not set
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L92=y
#
# Intel pinctrl drivers
#
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_LYNXPOINT is not set
CONFIG_PINCTRL_MERRIFIELD=m
# CONFIG_PINCTRL_ALDERLAKE is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_CANNONLAKE is not set
# CONFIG_PINCTRL_CEDARFORK is not set
# CONFIG_PINCTRL_DENVERTON is not set
# CONFIG_PINCTRL_ELKHARTLAKE is not set
# CONFIG_PINCTRL_EMMITSBURG is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_JASPERLAKE is not set
# CONFIG_PINCTRL_LAKEFIELD is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
# CONFIG_PINCTRL_TIGERLAKE is not set
# end of Intel pinctrl drivers
#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
# CONFIG_GPIO_CDEV is not set
CONFIG_GPIO_GENERIC=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=m
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_CADENCE=m
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_GRGPIO=y
CONFIG_GPIO_HLWD=y
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LOGICVC=m
CONFIG_GPIO_MB86S7X=m
# CONFIG_GPIO_MENZ127 is not set
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SIOX=y
CONFIG_GPIO_SYSCON=m
CONFIG_GPIO_VX855=m
CONFIG_GPIO_XILINX=y
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_104_DIO_48E=m
# CONFIG_GPIO_104_IDIO_16 is not set
CONFIG_GPIO_104_IDI_48=y
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_GPIO_MM=m
CONFIG_GPIO_IT87=y
# CONFIG_GPIO_SCH is not set
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_WINBOND=m
CONFIG_GPIO_WS16C48=m
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_GW_PLD is not set
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=y
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_BD9571MWV=m
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_KEMPLD=m
CONFIG_GPIO_LP3943=m
CONFIG_GPIO_LP873X=y
# CONFIG_GPIO_MADERA is not set
CONFIG_GPIO_MAX77620=y
# CONFIG_GPIO_MAX77650 is not set
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TPS65086=m
CONFIG_GPIO_TPS65218=m
CONFIG_GPIO_TPS6586X=y
# CONFIG_GPIO_TPS65910 is not set
CONFIG_GPIO_TPS65912=m
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_WM8350 is not set
CONFIG_GPIO_WM8994=y
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
CONFIG_GPIO_BT8XX=y
CONFIG_GPIO_MERRIFIELD=m
CONFIG_GPIO_ML_IOH=y
CONFIG_GPIO_PCI_IDIO_16=m
CONFIG_GPIO_PCIE_IDIO_24=y
CONFIG_GPIO_RDC321X=m
# CONFIG_GPIO_SODAVILLE is not set
# end of PCI GPIO expanders
#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=m
CONFIG_GPIO_MOCKUP=m
CONFIG_GPIO_VIRTIO=y
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m
CONFIG_W1_MASTER_SGI=m
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2405 is not set
CONFIG_W1_SLAVE_DS2408=m
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2406=m
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2805 is not set
CONFIG_W1_SLAVE_DS2430=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=m
CONFIG_W1_SLAVE_DS250X=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_ATC260X is not set
CONFIG_POWER_RESET_GPIO=y
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_REGULATOR is not set
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_RESET_TPS65086=y
# CONFIG_POWER_RESET_SYSCON is not set
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
CONFIG_REBOOT_MODE=m
# CONFIG_SYSCON_REBOOT_MODE is not set
CONFIG_NVMEM_REBOOT_MODE=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
# CONFIG_IP5XXX_POWER is not set
CONFIG_MAX8925_POWER=y
CONFIG_WM8350_POWER=m
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_CHARGER_ADP5061 is not set
CONFIG_BATTERY_ACT8945A=m
# CONFIG_BATTERY_CW2015 is not set
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=m
CONFIG_MANAGER_SBS=m
CONFIG_BATTERY_BQ27XXX=m
CONFIG_BATTERY_BQ27XXX_I2C=m
CONFIG_BATTERY_BQ27XXX_HDQ=m
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
CONFIG_BATTERY_DA9030=m
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_BATTERY_MAX1721X=m
# CONFIG_CHARGER_PCF50633 is not set
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_LP8727=m
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LT3651=m
# CONFIG_CHARGER_LTC4162L is not set
CONFIG_CHARGER_DETECTOR_MAX14656=m
CONFIG_CHARGER_MAX77650=m
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_MAX8997 is not set
CONFIG_CHARGER_MAX8998=m
CONFIG_CHARGER_BQ2415X=m
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=m
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=m
# CONFIG_CHARGER_BQ25980 is not set
CONFIG_CHARGER_BQ256XX=y
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_BATTERY_GOLDFISH=m
# CONFIG_BATTERY_RT5033 is not set
CONFIG_CHARGER_RT9455=m
CONFIG_CHARGER_UCS1002=y
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=m
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=m
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_AHT10=m
CONFIG_SENSORS_AS370=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_AXI_FAN_CONTROL=m
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ASPEED=m
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_DELL_SMM is not set
CONFIG_SENSORS_DA9055=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
# CONFIG_SENSORS_GSC is not set
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC2947=m
CONFIG_SENSORS_LTC2947_I2C=m
CONFIG_SENSORS_LTC2990=m
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=m
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX127=m
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31730 is not set
CONFIG_SENSORS_MAX6620=m
CONFIG_SENSORS_MAX6621=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MAX31790=m
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_TC654 is not set
CONFIG_SENSORS_TPS23861=m
CONFIG_SENSORS_MENF21BMC_HWMON=m
# CONFIG_SENSORS_MR75203 is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT6775_I2C is not set
CONFIG_SENSORS_NCT7802=m
# CONFIG_SENSORS_NPCM7XX is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1266=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_BEL_PFE=m
# CONFIG_SENSORS_BPA_RS600 is not set
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
# CONFIG_SENSORS_FSP_3Y is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
CONFIG_SENSORS_DPS920AB=m
CONFIG_SENSORS_INSPUR_IPSPS=m
CONFIG_SENSORS_IR35221=m
CONFIG_SENSORS_IR36021=m
CONFIG_SENSORS_IR38064=m
# CONFIG_SENSORS_IR38064_REGULATOR is not set
CONFIG_SENSORS_IRPS5401=m
CONFIG_SENSORS_ISL68137=m
CONFIG_SENSORS_LM25066=m
# CONFIG_SENSORS_LM25066_REGULATOR is not set
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=m
CONFIG_SENSORS_MAX15301=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX16601=m
CONFIG_SENSORS_MAX20730=m
CONFIG_SENSORS_MAX20751=m
CONFIG_SENSORS_MAX31785=m
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_MP2888=m
CONFIG_SENSORS_MP2975=m
# CONFIG_SENSORS_MP5023 is not set
CONFIG_SENSORS_PIM4328=m
# CONFIG_SENSORS_PLI1209BC is not set
CONFIG_SENSORS_PM6764TR=m
CONFIG_SENSORS_PXE1610=m
CONFIG_SENSORS_Q54SJ108A2=m
# CONFIG_SENSORS_STPDDC60 is not set
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_TPS53679=m
CONFIG_SENSORS_UCD9000=m
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_XDPE152 is not set
# CONFIG_SENSORS_XDPE122 is not set
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SBTSI=m
CONFIG_SENSORS_SBRMI=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
CONFIG_SENSORS_SHT4x=m
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_SY7636A is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_STTS751=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
CONFIG_SENSORS_TC74=m
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP108=m
CONFIG_SENSORS_TMP401=m
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
CONFIG_SENSORS_TMP513=m
# CONFIG_SENSORS_VIA_CPUTEMP is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_WM8350 is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ASUS_EC is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_OF is not set
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_MMIO=y
# CONFIG_MAX77620_THERMAL is not set
# CONFIG_DA9062_THERMAL is not set
#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_PKG_TEMP_THERMAL=y
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_INTEL_TCC_COOLING is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_INTEL_HFI_THERMAL is not set
# end of Intel thermal drivers
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=m
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=m
CONFIG_MFD_BCM590XX=m
CONFIG_MFD_BD9571MWV=m
# CONFIG_MFD_AXP20X_I2C is not set
CONFIG_MFD_MADERA=y
# CONFIG_MFD_MADERA_I2C is not set
# CONFIG_MFD_CS47L15 is not set
CONFIG_MFD_CS47L35=y
# CONFIG_MFD_CS47L85 is not set
# CONFIG_MFD_CS47L90 is not set
CONFIG_MFD_CS47L92=y
CONFIG_PMIC_DA903X=y
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
CONFIG_MFD_GATEWORKS_GSC=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_MFD_MP2629=y
CONFIG_MFD_HI6421_PMIC=m
CONFIG_HTC_PASIC3=m
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=y
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
# CONFIG_INTEL_SOC_PMIC_MRFLD is not set
CONFIG_MFD_INTEL_LPSS=m
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
CONFIG_MFD_INTEL_LPSS_PCI=m
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=y
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
CONFIG_MFD_MENF21BMC=y
# CONFIG_MFD_NTXEC is not set
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
# CONFIG_UCB1400_CORE is not set
CONFIG_MFD_RDC321X=m
# CONFIG_MFD_RT4831 is not set
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_RK808=y
CONFIG_MFD_RN5T618=y
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SIMPLE_MFD_I2C is not set
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
CONFIG_MFD_SKY81452=y
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
# CONFIG_STMPE_I2C is not set
# end of STMicroelectronics STMPE Interface Drivers
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=m
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
CONFIG_MFD_TPS65086=m
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TI_LP873X=y
# CONFIG_MFD_TI_LP87565 is not set
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STPMIC1 is not set
CONFIG_MFD_STMFX=m
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
CONFIG_MFD_QCOM_PM8008=m
CONFIG_RAVE_SP_CORE=m
CONFIG_MFD_RSMU_I2C=y
# end of Multifunction device drivers
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=m
# CONFIG_REGULATOR_ACT8945A is not set
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARIZONA_LDO1=m
CONFIG_REGULATOR_ARIZONA_MICSUPP=m
CONFIG_REGULATOR_ATC260X=y
CONFIG_REGULATOR_BCM590XX=m
CONFIG_REGULATOR_BD9571MWV=m
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9055 is not set
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9063=m
# CONFIG_REGULATOR_DA9121 is not set
CONFIG_REGULATOR_DA9210=y
# CONFIG_REGULATOR_DA9211 is not set
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_FAN53880=y
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_HI6421 is not set
CONFIG_REGULATOR_HI6421V530=m
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP873X=y
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX77620=m
CONFIG_REGULATOR_MAX77650=y
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8893 is not set
# CONFIG_REGULATOR_MAX8907 is not set
CONFIG_REGULATOR_MAX8925=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX8998=y
# CONFIG_REGULATOR_MAX20086 is not set
CONFIG_REGULATOR_MAX77693=y
# CONFIG_REGULATOR_MAX77826 is not set
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_MCP16502=m
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MP886X=y
CONFIG_REGULATOR_MPQ7920=m
CONFIG_REGULATOR_MT6311=m
# CONFIG_REGULATOR_PALMAS is not set
CONFIG_REGULATOR_PCA9450=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_PF8X00=m
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=m
# CONFIG_REGULATOR_PV88080 is not set
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_RN5T618=m
CONFIG_REGULATOR_RT4801=m
# CONFIG_REGULATOR_RT5033 is not set
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5759 is not set
# CONFIG_REGULATOR_RT6160 is not set
CONFIG_REGULATOR_RT6245=y
CONFIG_REGULATOR_RTQ2134=y
CONFIG_REGULATOR_RTMV20=y
# CONFIG_REGULATOR_RTQ6752 is not set
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_SLG51000=m
# CONFIG_REGULATOR_SY7636A is not set
CONFIG_REGULATOR_SY8106A=y
# CONFIG_REGULATOR_SY8824X is not set
# CONFIG_REGULATOR_SY8827N is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS6105X is not set
CONFIG_REGULATOR_TPS62360=y
# CONFIG_REGULATOR_TPS6286X is not set
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=m
# CONFIG_REGULATOR_TPS65086 is not set
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_TPS65218 is not set
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65910=m
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_TWL4030=m
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_WM8350=m
# CONFIG_REGULATOR_WM8994 is not set
# CONFIG_RC_CORE is not set
#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=m
# CONFIG_AGP_VIA is not set
CONFIG_INTEL_GTT=y
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set
#
# ARM devices
#
# end of ARM devices
#
# Frame buffer Devices
#
# CONFIG_FB is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_DA903X=m
# CONFIG_BACKLIGHT_MAX8925 is not set
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_ADP5520=y
CONFIG_BACKLIGHT_ADP8860=y
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_88PM860X=y
CONFIG_BACKLIGHT_PCF50633=m
CONFIG_BACKLIGHT_AAT2870=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_PANDORA=y
# CONFIG_BACKLIGHT_SKY81452 is not set
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=m
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=m
CONFIG_BACKLIGHT_RAVE_SP=m
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support
# end of Graphics support
CONFIG_SOUND=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
# CONFIG_SND_PCM_TIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
# CONFIG_SND_PCM_XRUN_DEBUG is not set
# CONFIG_SND_CTL_VALIDATION is not set
CONFIG_SND_JACK_INJECTION_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_VIRMIDI=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_SERIAL_GENERIC is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
# CONFIG_SND_PCI is not set
#
# HD-Audio
#
# end of HD-Audio
CONFIG_SND_HDA_PREALLOC_SIZE=0
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=m
CONFIG_SND_INTEL_SOUNDWIRE_ACPI=m
# CONFIG_SND_FIREWIRE is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_ACPI=m
CONFIG_SND_SOC_ADI=m
CONFIG_SND_SOC_ADI_AXI_I2S=m
CONFIG_SND_SOC_ADI_AXI_SPDIF=m
# CONFIG_SND_SOC_AMD_ACP is not set
CONFIG_SND_SOC_AMD_ACP3x=m
# CONFIG_SND_SOC_AMD_RENOIR is not set
CONFIG_SND_SOC_AMD_ACP5x=m
CONFIG_SND_SOC_AMD_ACP6x=m
# CONFIG_SND_SOC_AMD_YC_MACH is not set
# CONFIG_SND_AMD_ACP_CONFIG is not set
# CONFIG_SND_SOC_AMD_ACP_COMMON is not set
CONFIG_SND_ATMEL_SOC=m
# CONFIG_SND_SOC_MIKROE_PROTO is not set
# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set
CONFIG_SND_DESIGNWARE_I2S=m
CONFIG_SND_DESIGNWARE_PCM=y
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=m
CONFIG_SND_SOC_FSL_SAI=m
# CONFIG_SND_SOC_FSL_MQS is not set
CONFIG_SND_SOC_FSL_AUDMIX=m
CONFIG_SND_SOC_FSL_SSI=m
CONFIG_SND_SOC_FSL_SPDIF=m
CONFIG_SND_SOC_FSL_ESAI=m
# CONFIG_SND_SOC_FSL_MICFIL is not set
CONFIG_SND_SOC_FSL_EASRC=m
CONFIG_SND_SOC_FSL_XCVR=m
CONFIG_SND_SOC_FSL_RPMSG=m
CONFIG_SND_SOC_IMX_AUDMUX=m
# end of SoC Audio for Freescale CPUs
CONFIG_SND_I2S_HI6210_I2S=m
# CONFIG_SND_SOC_IMG is not set
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
# CONFIG_SND_SOC_INTEL_CATPT is not set
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m
# CONFIG_SND_SOC_INTEL_SKYLAKE is not set
# CONFIG_SND_SOC_INTEL_SKL is not set
# CONFIG_SND_SOC_INTEL_APL is not set
# CONFIG_SND_SOC_INTEL_KBL is not set
# CONFIG_SND_SOC_INTEL_GLK is not set
# CONFIG_SND_SOC_INTEL_CNL is not set
# CONFIG_SND_SOC_INTEL_CFL is not set
# CONFIG_SND_SOC_INTEL_CML_H is not set
# CONFIG_SND_SOC_INTEL_CML_LP is not set
CONFIG_SND_SOC_ACPI_INTEL_MATCH=m
# CONFIG_SND_SOC_INTEL_AVS is not set
CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES=y
# CONFIG_SND_SOC_INTEL_SOF_WM8804_MACH is not set
CONFIG_SND_SOC_MTK_BTCVSD=m
CONFIG_SND_SOC_SOF_TOPLEVEL=y
CONFIG_SND_SOC_SOF_PCI_DEV=m
CONFIG_SND_SOC_SOF_PCI=m
# CONFIG_SND_SOC_SOF_ACPI is not set
CONFIG_SND_SOC_SOF_OF=m
CONFIG_SND_SOC_SOF_DEBUG_PROBES=m
CONFIG_SND_SOC_SOF_CLIENT=m
# CONFIG_SND_SOC_SOF_DEVELOPER_SUPPORT is not set
CONFIG_SND_SOC_SOF=m
# CONFIG_SND_SOC_SOF_AMD_TOPLEVEL is not set
CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y
CONFIG_SND_SOC_SOF_INTEL_COMMON=m
# CONFIG_SND_SOC_SOF_MERRIFIELD is not set
CONFIG_SND_SOC_SOF_INTEL_APL=m
CONFIG_SND_SOC_SOF_APOLLOLAKE=m
CONFIG_SND_SOC_SOF_GEMINILAKE=m
CONFIG_SND_SOC_SOF_INTEL_CNL=m
CONFIG_SND_SOC_SOF_CANNONLAKE=m
# CONFIG_SND_SOC_SOF_COFFEELAKE is not set
# CONFIG_SND_SOC_SOF_COMETLAKE is not set
CONFIG_SND_SOC_SOF_INTEL_ICL=m
# CONFIG_SND_SOC_SOF_ICELAKE is not set
CONFIG_SND_SOC_SOF_JASPERLAKE=m
CONFIG_SND_SOC_SOF_INTEL_TGL=m
# CONFIG_SND_SOC_SOF_TIGERLAKE is not set
CONFIG_SND_SOC_SOF_ELKHARTLAKE=m
CONFIG_SND_SOC_SOF_ALDERLAKE=m
CONFIG_SND_SOC_SOF_HDA_COMMON=m
# CONFIG_SND_SOC_SOF_HDA_LINK is not set
CONFIG_SND_SOC_SOF_HDA_LINK_BASELINE=m
CONFIG_SND_SOC_SOF_HDA_PROBES=m
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=m
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE=m
CONFIG_SND_SOC_SOF_XTENSA=m
#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support
# CONFIG_SND_SOC_XILINX_I2S is not set
# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set
# CONFIG_SND_SOC_XILINX_SPDIF is not set
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
#
# CODEC drivers
#
CONFIG_SND_SOC_WM_ADSP=m
CONFIG_SND_SOC_AC97_CODEC=m
CONFIG_SND_SOC_ADAU_UTILS=m
# CONFIG_SND_SOC_ADAU1372_I2C is not set
CONFIG_SND_SOC_ADAU1701=m
CONFIG_SND_SOC_ADAU17X1=m
CONFIG_SND_SOC_ADAU1761=m
CONFIG_SND_SOC_ADAU1761_I2C=m
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_ADAU7118=m
# CONFIG_SND_SOC_ADAU7118_HW is not set
CONFIG_SND_SOC_ADAU7118_I2C=m
CONFIG_SND_SOC_AK4118=m
# CONFIG_SND_SOC_AK4375 is not set
CONFIG_SND_SOC_AK4458=m
CONFIG_SND_SOC_AK4554=m
CONFIG_SND_SOC_AK4613=m
# CONFIG_SND_SOC_AK4642 is not set
CONFIG_SND_SOC_AK5386=m
CONFIG_SND_SOC_AK5558=m
# CONFIG_SND_SOC_ALC5623 is not set
# CONFIG_SND_SOC_AW8738 is not set
CONFIG_SND_SOC_BD28623=m
# CONFIG_SND_SOC_BT_SCO is not set
CONFIG_SND_SOC_CS35L32=m
CONFIG_SND_SOC_CS35L33=m
CONFIG_SND_SOC_CS35L34=m
CONFIG_SND_SOC_CS35L35=m
CONFIG_SND_SOC_CS35L36=m
CONFIG_SND_SOC_CS35L41_LIB=m
CONFIG_SND_SOC_CS35L41=m
CONFIG_SND_SOC_CS35L41_I2C=m
# CONFIG_SND_SOC_CS35L45_I2C is not set
CONFIG_SND_SOC_CS42L42=m
# CONFIG_SND_SOC_CS42L51_I2C is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
CONFIG_SND_SOC_CS42L73=m
CONFIG_SND_SOC_CS4234=m
CONFIG_SND_SOC_CS4265=m
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271_I2C is not set
CONFIG_SND_SOC_CS42XX8=m
CONFIG_SND_SOC_CS42XX8_I2C=m
CONFIG_SND_SOC_CS43130=m
CONFIG_SND_SOC_CS4341=m
# CONFIG_SND_SOC_CS4349 is not set
CONFIG_SND_SOC_CS53L30=m
# CONFIG_SND_SOC_CX2072X is not set
CONFIG_SND_SOC_DA7213=m
CONFIG_SND_SOC_DMIC=m
# CONFIG_SND_SOC_ES7134 is not set
CONFIG_SND_SOC_ES7241=m
# CONFIG_SND_SOC_ES8316 is not set
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_I2C=m
CONFIG_SND_SOC_GTM601=m
CONFIG_SND_SOC_ICS43432=m
# CONFIG_SND_SOC_INNO_RK3036 is not set
CONFIG_SND_SOC_MAX98088=m
CONFIG_SND_SOC_MAX98357A=m
CONFIG_SND_SOC_MAX98504=m
CONFIG_SND_SOC_MAX9867=m
# CONFIG_SND_SOC_MAX98927 is not set
# CONFIG_SND_SOC_MAX98520 is not set
CONFIG_SND_SOC_MAX98373=m
CONFIG_SND_SOC_MAX98373_I2C=m
# CONFIG_SND_SOC_MAX98373_SDW is not set
# CONFIG_SND_SOC_MAX98390 is not set
# CONFIG_SND_SOC_MAX98396 is not set
CONFIG_SND_SOC_MAX9860=m
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
CONFIG_SND_SOC_PCM1681=m
CONFIG_SND_SOC_PCM1789=m
CONFIG_SND_SOC_PCM1789_I2C=m
CONFIG_SND_SOC_PCM179X=m
CONFIG_SND_SOC_PCM179X_I2C=m
CONFIG_SND_SOC_PCM186X=m
CONFIG_SND_SOC_PCM186X_I2C=m
CONFIG_SND_SOC_PCM3060=m
CONFIG_SND_SOC_PCM3060_I2C=m
CONFIG_SND_SOC_PCM3168A=m
CONFIG_SND_SOC_PCM3168A_I2C=m
CONFIG_SND_SOC_PCM5102A=m
# CONFIG_SND_SOC_PCM512x_I2C is not set
CONFIG_SND_SOC_RK3328=m
# CONFIG_SND_SOC_RK817 is not set
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RT1308_SDW=m
CONFIG_SND_SOC_RT1316_SDW=m
CONFIG_SND_SOC_RT5616=m
CONFIG_SND_SOC_RT5631=m
CONFIG_SND_SOC_RT5640=m
CONFIG_SND_SOC_RT5659=m
CONFIG_SND_SOC_RT5682=m
CONFIG_SND_SOC_RT5682_SDW=m
CONFIG_SND_SOC_RT700=m
CONFIG_SND_SOC_RT700_SDW=m
CONFIG_SND_SOC_RT711=m
CONFIG_SND_SOC_RT711_SDW=m
CONFIG_SND_SOC_RT711_SDCA_SDW=m
CONFIG_SND_SOC_RT715=m
CONFIG_SND_SOC_RT715_SDW=m
CONFIG_SND_SOC_RT715_SDCA_SDW=m
# CONFIG_SND_SOC_RT9120 is not set
CONFIG_SND_SOC_SDW_MOCKUP=m
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_I2C=m
CONFIG_SND_SOC_SIGMADSP_REGMAP=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
CONFIG_SND_SOC_SIMPLE_MUX=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SSM2305=m
# CONFIG_SND_SOC_SSM2518 is not set
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_SSM2602_I2C=m
CONFIG_SND_SOC_SSM4567=m
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
CONFIG_SND_SOC_STI_SAS=m
CONFIG_SND_SOC_TAS2552=m
# CONFIG_SND_SOC_TAS2562 is not set
CONFIG_SND_SOC_TAS2764=m
# CONFIG_SND_SOC_TAS2770 is not set
CONFIG_SND_SOC_TAS5086=m
CONFIG_SND_SOC_TAS571X=m
CONFIG_SND_SOC_TAS5720=m
# CONFIG_SND_SOC_TAS5805M is not set
# CONFIG_SND_SOC_TAS6424 is not set
CONFIG_SND_SOC_TDA7419=m
CONFIG_SND_SOC_TFA9879=m
# CONFIG_SND_SOC_TFA989X is not set
# CONFIG_SND_SOC_TLV320ADC3XXX is not set
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
CONFIG_SND_SOC_TLV320AIC31XX=m
CONFIG_SND_SOC_TLV320AIC32X4=m
CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TLV320AIC3X_I2C=m
# CONFIG_SND_SOC_TLV320ADCX140 is not set
CONFIG_SND_SOC_TS3A227E=m
# CONFIG_SND_SOC_TSCS42XX is not set
# CONFIG_SND_SOC_TSCS454 is not set
# CONFIG_SND_SOC_UDA1334 is not set
CONFIG_SND_SOC_WCD_MBHC=m
CONFIG_SND_SOC_WCD938X=m
CONFIG_SND_SOC_WCD938X_SDW=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8524=m
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
CONFIG_SND_SOC_WM8728=m
# CONFIG_SND_SOC_WM8731_I2C is not set
CONFIG_SND_SOC_WM8737=m
CONFIG_SND_SOC_WM8741=m
# CONFIG_SND_SOC_WM8750 is not set
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8782=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8804_I2C=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=m
# CONFIG_SND_SOC_WM8940 is not set
CONFIG_SND_SOC_WM8960=m
# CONFIG_SND_SOC_WM8962 is not set
# CONFIG_SND_SOC_WM8974 is not set
# CONFIG_SND_SOC_WM8978 is not set
# CONFIG_SND_SOC_WM8985 is not set
CONFIG_SND_SOC_WSA881X=m
# CONFIG_SND_SOC_MAX9759 is not set
# CONFIG_SND_SOC_MT6351 is not set
CONFIG_SND_SOC_MT6358=m
CONFIG_SND_SOC_MT6660=m
CONFIG_SND_SOC_NAU8315=m
# CONFIG_SND_SOC_NAU8540 is not set
# CONFIG_SND_SOC_NAU8810 is not set
CONFIG_SND_SOC_NAU8821=m
CONFIG_SND_SOC_NAU8822=m
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SOC_LPASS_MACRO_COMMON=m
CONFIG_SND_SOC_LPASS_WSA_MACRO=m
CONFIG_SND_SOC_LPASS_VA_MACRO=m
# CONFIG_SND_SOC_LPASS_RX_MACRO is not set
CONFIG_SND_SOC_LPASS_TX_MACRO=m
# end of CODEC drivers
CONFIG_SND_SIMPLE_CARD_UTILS=m
# CONFIG_SND_SIMPLE_CARD is not set
CONFIG_SND_AUDIO_GRAPH_CARD=m
# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set
# CONFIG_SND_TEST_COMPONENT is not set
# CONFIG_SND_X86 is not set
CONFIG_SND_VIRTIO=m
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NINTENDO is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PLAYSTATION is not set
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# I2C HID support
#
# CONFIG_I2C_HID_ACPI is not set
# CONFIG_I2C_HID_OF is not set
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support
#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
# end of Intel ISH HID support
#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
CONFIG_USB_PCI=y
#
# USB port drivers
#
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_TAHVO_USB is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=m
CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
# CONFIG_MEMSTICK_REALTEK_PCI is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_CLASS_MULTICOLOR=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
CONFIG_LEDS_88PM860X=m
# CONFIG_LEDS_AN30259A is not set
CONFIG_LEDS_AW2013=y
CONFIG_LEDS_BCM6328=y
# CONFIG_LEDS_BCM6358 is not set
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3532=m
# CONFIG_LEDS_LM3533 is not set
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_LM3692X=y
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
# CONFIG_LEDS_LP50XX is not set
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA955X_GPIO is not set
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM8350=y
# CONFIG_LEDS_DA903X is not set
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_ADP5520=y
CONFIG_LEDS_MC13783=m
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TLC591XX=y
# CONFIG_LEDS_MAX77650 is not set
CONFIG_LEDS_MAX8997=y
# CONFIG_LEDS_LM355x is not set
CONFIG_LEDS_MENF21BMC=y
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_MLXREG=m
CONFIG_LEDS_USER=y
# CONFIG_LEDS_NIC78BX is not set
CONFIG_LEDS_TI_LMU_COMMON=m
CONFIG_LEDS_LM3697=m
# CONFIG_LEDS_TPS6105X is not set
CONFIG_LEDS_LGM=y
#
# Flash and Torch LED drivers
#
#
# RGB LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_ACTIVITY=y
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_LEDS_TRIGGER_NETDEV=m
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_VIRT_DMA=y
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_EFA=m
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_OCRDMA is not set
# CONFIG_INFINIBAND_RDMAVT is not set
# CONFIG_RDMA_RXE is not set
CONFIG_RDMA_SIW=m
# CONFIG_INFINIBAND_IPOIB is not set
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISERT=m
CONFIG_INFINIBAND_RTRS=m
CONFIG_INFINIBAND_RTRS_CLIENT=m
# CONFIG_INFINIBAND_RTRS_SERVER is not set
# CONFIG_INFINIBAND_OPA_VNIC is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_DW_AXI_DMAC=m
# CONFIG_FSL_EDMA is not set
CONFIG_INTEL_IDMA64=m
CONFIG_INTEL_IDXD_BUS=y
CONFIG_INTEL_IDXD_COMPAT=y
CONFIG_INTEL_IOATDMA=m
CONFIG_PLX_DMA=m
CONFIG_XILINX_ZYNQMP_DPDMA=y
# CONFIG_AMD_PTDMA is not set
CONFIG_QCOM_HIDMA_MGMT=y
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
# CONFIG_DW_DMAC is not set
CONFIG_DW_DMAC_PCI=y
CONFIG_DW_EDMA=m
CONFIG_DW_EDMA_PCIE=m
CONFIG_HSU_DMA=y
CONFIG_HSU_DMA_PCI=y
# CONFIG_SF_PDMA is not set
CONFIG_INTEL_LDMA=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
CONFIG_DMABUF_DEBUG=y
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
# CONFIG_DMABUF_HEAPS_SYSTEM is not set
# end of DMABUF options
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=m
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=m
# CONFIG_UIO_PCI_GENERIC is not set
CONFIG_UIO_NETX=m
CONFIG_UIO_PRUSS=m
CONFIG_UIO_MF624=m
CONFIG_VFIO=m
CONFIG_VFIO_IOMMU_TYPE1=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
# CONFIG_VFIO_PCI is not set
# CONFIG_VFIO_MDEV is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VMGENID=y
# CONFIG_VBOXGUEST is not set
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VDPA is not set
# CONFIG_VHOST_MENU is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=m
# CONFIG_COMEDI is not set
CONFIG_STAGING=y
# CONFIG_RTLLIB is not set
# CONFIG_STAGING_MEDIA is not set
# CONFIG_STAGING_BOARD is not set
# CONFIG_FIREWIRE_SERIAL is not set
CONFIG_COMMON_CLK_XLNX_CLKWZRD=m
# CONFIG_GREYBUS_AUDIO is not set
CONFIG_GREYBUS_BOOTROM=m
# CONFIG_GREYBUS_HID is not set
CONFIG_GREYBUS_LIGHT=m
CONFIG_GREYBUS_LOG=m
CONFIG_GREYBUS_LOOPBACK=m
CONFIG_GREYBUS_POWER=m
CONFIG_GREYBUS_RAW=m
# CONFIG_GREYBUS_VIBRATOR is not set
# CONFIG_GREYBUS_BRIDGED_PHY is not set
CONFIG_XIL_AXIS_FIFO=y
CONFIG_FIELDBUS_DEV=m
CONFIG_HMS_ANYBUSS_BUS=m
CONFIG_ARCX_ANYBUS_CONTROLLER=m
CONFIG_HMS_PROFINET=m
# CONFIG_QLGE is not set
#
# VME Device Drivers
#
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ACER_WIRELESS is not set
# CONFIG_ADV_SWBUTTON is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ASUS_TF103C_DOCK is not set
# CONFIG_X86_PLATFORM_DRIVERS_DELL is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_WIRELESS_HOTKEY is not set
CONFIG_IBM_RTL=y
# CONFIG_SENSORS_HDAPS is not set
CONFIG_INTEL_ATOMISP2_PDX86=y
# CONFIG_INTEL_ATOMISP2_LED is not set
CONFIG_INTEL_ATOMISP2_PM=y
# CONFIG_INTEL_SAR_INT1092 is not set
# CONFIG_INTEL_SKL_INT3472 is not set
# CONFIG_INTEL_PMC_CORE is not set
#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support
#
# Intel Uncore Frequency Control
#
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
# end of Intel Uncore Frequency Control
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_INT0002_VGPIO is not set
CONFIG_INTEL_PUNIT_IPC=m
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_INTEL_VSEC is not set
# CONFIG_PCENGINES_APU2 is not set
# CONFIG_BARCO_P50_GPIO is not set
CONFIG_SAMSUNG_LAPTOP=y
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_SYSTEM76_ACPI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
CONFIG_MLX_PLATFORM=m
# CONFIG_INTEL_IPS is not set
CONFIG_INTEL_SCU_IPC=y
CONFIG_INTEL_SCU=y
CONFIG_INTEL_SCU_PCI=y
# CONFIG_INTEL_SCU_PLATFORM is not set
CONFIG_INTEL_SCU_IPC_UTIL=y
# CONFIG_SIEMENS_SIMATIC_IPC is not set
# CONFIG_WINMATE_FM07_KEYS is not set
CONFIG_PMC_ATOM=y
# CONFIG_GOLDFISH_PIPE is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_HOTPLUG is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_SURFACE_AGGREGATOR is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_MAX77686=m
# CONFIG_COMMON_CLK_MAX9485 is not set
CONFIG_COMMON_CLK_RK808=m
CONFIG_COMMON_CLK_SI5341=m
# CONFIG_COMMON_CLK_SI5351 is not set
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI544=y
# CONFIG_COMMON_CLK_SI570 is not set
CONFIG_COMMON_CLK_CDCE706=m
# CONFIG_COMMON_CLK_CDCE925 is not set
CONFIG_COMMON_CLK_CS2000_CP=m
CONFIG_COMMON_CLK_AXI_CLKGEN=m
CONFIG_COMMON_CLK_PALMAS=y
# CONFIG_COMMON_CLK_RS9_PCIE is not set
# CONFIG_COMMON_CLK_VC5 is not set
CONFIG_COMMON_CLK_FIXED_MMIO=y
# CONFIG_CLK_LGM_CGU is not set
CONFIG_XILINX_VCU=m
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
CONFIG_DW_APB_TIMER=y
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_PLATFORM_MHU=m
# CONFIG_PCC is not set
CONFIG_ALTERA_MBOX=y
# CONFIG_MAILBOX_TEST is not set
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
# CONFIG_REMOTEPROC_CDEV is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=m
CONFIG_RPMSG_CHAR=m
# CONFIG_RPMSG_CTRL is not set
CONFIG_RPMSG_NS=m
CONFIG_RPMSG_QCOM_GLINK=m
CONFIG_RPMSG_QCOM_GLINK_RPM=m
CONFIG_RPMSG_VIRTIO=m
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_CADENCE=m
CONFIG_SOUNDWIRE_INTEL=m
CONFIG_SOUNDWIRE_QCOM=m
CONFIG_SOUNDWIRE_GENERIC_ALLOCATION=m
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=m
# end of Enable LiteX SoC Builder specific drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_FSA9480 is not set
CONFIG_EXTCON_GPIO=m
# CONFIG_EXTCON_INTEL_INT3496 is not set
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77843=m
# CONFIG_EXTCON_MAX8997 is not set
CONFIG_EXTCON_PALMAS=m
CONFIG_EXTCON_PTN5150=m
# CONFIG_EXTCON_RT8973A is not set
CONFIG_EXTCON_SM5502=m
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_TUSB320=m
CONFIG_MEMORY=y
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
CONFIG_MADERA_IRQ=y
# CONFIG_XILINX_INTC is not set
# end of IRQ chip support
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
# CONFIG_SERIAL_IPOCTAL is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_INTEL_GW is not set
# CONFIG_RESET_TI_SYSCON is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_USB_LGM_PHY is not set
CONFIG_PHY_CAN_TRANSCEIVER=y
#
# PHY drivers for Broadcom platforms
#
CONFIG_BCM_KONA_USB2_PHY=m
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_CADENCE_TORRENT=m
CONFIG_PHY_CADENCE_DPHY=m
# CONFIG_PHY_CADENCE_DPHY_RX is not set
CONFIG_PHY_CADENCE_SIERRA=y
CONFIG_PHY_CADENCE_SALVO=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_LAN966X_SERDES is not set
# CONFIG_PHY_MAPPHONE_MDM6600 is not set
CONFIG_PHY_OCELOT_SERDES=m
CONFIG_PHY_INTEL_LGM_COMBO=y
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
CONFIG_MCB=m
CONFIG_MCB_PCI=m
CONFIG_MCB_LPC=m
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=m
# CONFIG_BTT is not set
CONFIG_OF_PMEM=m
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_RAVE_SP_EEPROM is not set
CONFIG_NVMEM_RMEM=y
#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_PROTO_BASIC=y
CONFIG_STM_PROTO_SYS_T=m
CONFIG_STM_DUMMY=m
# CONFIG_STM_SOURCE_CONSOLE is not set
CONFIG_STM_SOURCE_HEARTBEAT=m
# CONFIG_STM_SOURCE_FTRACE is not set
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_PCI=m
# CONFIG_INTEL_TH_ACPI is not set
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=m
CONFIG_MUX_GPIO=m
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers
CONFIG_SIOX=y
# CONFIG_SIOX_BUS_GPIO is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
CONFIG_COUNTER=m
# CONFIG_104_QUAD_8 is not set
CONFIG_INTERRUPT_CNT=m
CONFIG_FTM_QUADDEC=m
CONFIG_MICROCHIP_TCB_CAPTURE=m
CONFIG_INTEL_QEP=m
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_CHECK=y
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
CONFIG_BTRFS_FS_REF_VERIFY=y
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=y
# CONFIG_F2FS_STAT_FS is not set
CONFIG_F2FS_FS_XATTR=y
# CONFIG_F2FS_FS_POSIX_ACL is not set
CONFIG_F2FS_FS_SECURITY=y
CONFIG_F2FS_CHECK_FS=y
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_F2FS_FS_COMPRESSION=y
# CONFIG_F2FS_FS_LZO is not set
# CONFIG_F2FS_FS_LZ4 is not set
# CONFIG_F2FS_FS_ZSTD is not set
# CONFIG_F2FS_IOSTAT is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_AUTOFS_FS=m
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_XINO_AUTO=y
CONFIG_OVERLAY_FS_METACOPY=y
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
CONFIG_FSCACHE_DEBUG=y
# CONFIG_CACHEFILES is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_TMPFS_INODE64 is not set
# CONFIG_HUGETLBFS is not set
CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=y
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
# CONFIG_UNICODE is not set
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_INFINIBAND is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_FORTIFY_SOURCE=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
# CONFIG_GCC_PLUGIN_STACKLEAK is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# CONFIG_RANDSTRUCT_PERFORMANCE is not set
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_ENGINE=y
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
# CONFIG_CRYPTO_ECDSA is not set
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=m
# CONFIG_CRYPTO_CURVE25519 is not set
CONFIG_CRYPTO_CURVE25519_X86=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_AEGIS128_AESNI_SSE2=y
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_NHPOLY1305=y
CONFIG_CRYPTO_NHPOLY1305_SSE2=y
CONFIG_CRYPTO_NHPOLY1305_AVX2=y
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_ESSIV is not set
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_BLAKE2B=m
# CONFIG_CRYPTO_BLAKE2S is not set
CONFIG_CRYPTO_BLAKE2S_X86=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SM3=y
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_SM3_AVX_X86_64 is not set
CONFIG_CRYPTO_STREEBOG=y
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_BLOWFISH_X86_64=y
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=y
CONFIG_CRYPTO_CAST6=y
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_CHACHA20=y
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
CONFIG_CRYPTO_SM4=y
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64=m
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_842=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
CONFIG_CRYPTO_ZSTD=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_RNG_CAVP=y
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
CONFIG_CRYPTO_STATS=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
CONFIG_CRYPTO_DEV_ATMEL_I2C=y
CONFIG_CRYPTO_DEV_ATMEL_ECC=y
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=m
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_QAT=y
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
CONFIG_CRYPTO_DEV_QAT_C3XXX=m
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
CONFIG_CRYPTO_DEV_QAT_4XXX=m
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=y
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
CONFIG_CRYPTO_DEV_NITROX=y
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=y
# CONFIG_CRYPTO_DEV_VIRTIO is not set
CONFIG_CRYPTO_DEV_SAFEXCEL=m
CONFIG_CRYPTO_DEV_CCREE=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=y
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
# CONFIG_RAID6_PQ_BENCHMARK is not set
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_LIB_MEMNEQ=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
# CONFIG_CRC4 is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
CONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not set
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_CMA is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACK_HASH_ORDER=20
CONFIG_SBITMAP=y
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=8192
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y
CONFIG_OBJTOOL=y
CONFIG_VMLINUX_MAP=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
# CONFIG_UBSAN_TRAP is not set
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
# CONFIG_UBSAN_DIV_ZERO is not set
# CONFIG_UBSAN_BOOL is not set
# CONFIG_UBSAN_ENUM is not set
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_SANITIZE_ALL=y
# CONFIG_TEST_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_PAGE_OWNER=y
# CONFIG_PAGE_TABLE_CHECK is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
# CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_HAVE_ARCH_KFENCE=y
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
CONFIG_DEBUG_TIMEKEEPING=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RAW_LOCK_NESTING is not set
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_LIST=y
CONFIG_TORTURE_TEST=m
CONFIG_RCU_SCALE_TEST=m
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_REF_SCALE_TEST is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_EQS_DEBUG=y
# CONFIG_RCU_STRICT_GRACE_PERIOD is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
#
# x86 Debugging
#
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAIL_PAGE_ALLOC is not set
CONFIG_FAULT_INJECTION_USERCOPY=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_KCOV=y
# CONFIG_KCOV_ENABLE_COMPARISONS is not set
CONFIG_KCOV_INSTRUMENT_ALL=y
CONFIG_KCOV_IRQ_AREA_SIZE=0x40000
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage
# end of Kernel hacking
[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 5031 bytes --]
#!/bin/sh
export_top_env()
{
export suite='boot'
export testcase='boot'
export category='functional'
export timeout='10m'
export job_origin='boot.yaml'
export queue_cmdline_keys=
export queue='int'
export testbox='vm-snb'
export tbox_group='vm-snb'
export branch='linux-review/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903'
export commit='03d56978dd246147e151916e4dc72af7bc24d5c9'
export kconfig='x86_64-randconfig-a002-20211206'
export nr_vm=160
export submit_id='62dd15e80b9a93b95c54b72c'
export job_file='/lkp/jobs/scheduled/vm-meta-162/boot-1-debian-11.1-x86_64-20220510.cgz-03d56978dd246147e151916e4dc72af7bc24d5c9-20220724-47452-y7oq44-5.yaml'
export id='900cf30846d3b9071dc00382863bc27896740db8'
export queuer_version='/lkp/xsang/.src-20220723-170131'
export model='qemu-system-x86_64 -enable-kvm -cpu SandyBridge'
export nr_cpu=2
export memory='16G'
export need_kconfig=\{\"KVM_GUEST\"\=\>\"y\"\}
export ssh_base_port=23032
export kernel_cmdline='vmalloc=256M initramfs_async=0 page_owner=on'
export rootfs='debian-11.1-x86_64-20220510.cgz'
export compiler='gcc-11'
export enqueue_time='2022-07-24 17:50:32 +0800'
export _id='62dd15e90b9a93b95c54b731'
export _rt='/result/boot/1/vm-snb/debian-11.1-x86_64-20220510.cgz/x86_64-randconfig-a002-20211206/gcc-11/03d56978dd246147e151916e4dc72af7bc24d5c9'
export user='lkp'
export LKP_SERVER='internal-lkp-server'
export result_root='/result/boot/1/vm-snb/debian-11.1-x86_64-20220510.cgz/x86_64-randconfig-a002-20211206/gcc-11/03d56978dd246147e151916e4dc72af7bc24d5c9/19'
export scheduler_version='/lkp/lkp/src'
export arch='x86_64'
export max_uptime=600
export initrd='/osimage/debian/debian-11.1-x86_64-20220510.cgz'
export bootloader_append='root=/dev/ram0
RESULT_ROOT=/result/boot/1/vm-snb/debian-11.1-x86_64-20220510.cgz/x86_64-randconfig-a002-20211206/gcc-11/03d56978dd246147e151916e4dc72af7bc24d5c9/19
BOOT_IMAGE=/pkg/linux/x86_64-randconfig-a002-20211206/gcc-11/03d56978dd246147e151916e4dc72af7bc24d5c9/vmlinuz-5.19.0-rc7-01443-g03d56978dd24
branch=linux-review/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
job=/lkp/jobs/scheduled/vm-meta-162/boot-1-debian-11.1-x86_64-20220510.cgz-03d56978dd246147e151916e4dc72af7bc24d5c9-20220724-47452-y7oq44-5.yaml
user=lkp
ARCH=x86_64
kconfig=x86_64-randconfig-a002-20211206
commit=03d56978dd246147e151916e4dc72af7bc24d5c9
vmalloc=256M initramfs_async=0 page_owner=on
max_uptime=600
LKP_SERVER=internal-lkp-server
selinux=0
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
export modules_initrd='/pkg/linux/x86_64-randconfig-a002-20211206/gcc-11/03d56978dd246147e151916e4dc72af7bc24d5c9/modules.cgz'
export bm_initrd='/osimage/deps/debian-11.1-x86_64-20220510.cgz/run-ipconfig_20220515.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/lkp_20220513.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/rsync-rootfs_20220515.cgz'
export lkp_initrd='/osimage/user/lkp/lkp-x86_64.cgz'
export site='inn'
export LKP_CGI_PORT=80
export LKP_CIFS_PORT=139
export schedule_notify_address=
export meta_host='vm-meta-162'
export kernel='/pkg/linux/x86_64-randconfig-a002-20211206/gcc-11/03d56978dd246147e151916e4dc72af7bc24d5c9/vmlinuz-5.19.0-rc7-01443-g03d56978dd24'
export dequeue_time='2022-07-24 17:51:25 +0800'
export job_initrd='/lkp/jobs/scheduled/vm-meta-162/boot-1-debian-11.1-x86_64-20220510.cgz-03d56978dd246147e151916e4dc72af7bc24d5c9-20220724-47452-y7oq44-5.cgz'
[ -n "$LKP_SRC" ] ||
export LKP_SRC=/lkp/${user:-lkp}/src
}
run_job()
{
echo $$ > $TMP/run-job.pid
. $LKP_SRC/lib/http.sh
. $LKP_SRC/lib/job.sh
. $LKP_SRC/lib/env.sh
export_top_env
run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-slabinfo
run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-meminfo
run_monitor $LKP_SRC/monitors/one-shot/wrapper memmap
run_monitor $LKP_SRC/monitors/no-stdout/wrapper boot-time
run_monitor $LKP_SRC/monitors/wrapper kmsg
run_monitor $LKP_SRC/monitors/wrapper heartbeat
run_monitor $LKP_SRC/monitors/wrapper meminfo
run_monitor $LKP_SRC/monitors/wrapper oom-killer
run_monitor $LKP_SRC/monitors/plain/watchdog
run_test $LKP_SRC/tests/wrapper sleep 1
}
extract_stats()
{
export stats_part_begin=
export stats_part_end=
$LKP_SRC/stats/wrapper boot-slabinfo
$LKP_SRC/stats/wrapper boot-meminfo
$LKP_SRC/stats/wrapper memmap
$LKP_SRC/stats/wrapper boot-memory
$LKP_SRC/stats/wrapper boot-time
$LKP_SRC/stats/wrapper kernel-size
$LKP_SRC/stats/wrapper kmsg
$LKP_SRC/stats/wrapper sleep
$LKP_SRC/stats/wrapper meminfo
$LKP_SRC/stats/wrapper time sleep.time
$LKP_SRC/stats/wrapper dmesg
$LKP_SRC/stats/wrapper kmsg
$LKP_SRC/stats/wrapper last_state
$LKP_SRC/stats/wrapper stderr
$LKP_SRC/stats/wrapper time
}
"$@"
[-- Attachment #4: dmesg.xz --]
[-- Type: application/x-xz, Size: 16944 bytes --]
^ permalink raw reply [flat|nested] 21+ messages in thread
* [net] 03d56978dd: BUG:Bad_page_map_in_process
@ 2022-07-25 16:58 ` kernel test robot
0 siblings, 0 replies; 21+ messages in thread
From: kernel test robot @ 2022-07-25 16:58 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 6191 bytes --]
Greeting,
FYI, we noticed the following commit (built with gcc-11):
commit: 03d56978dd246147e151916e4dc72af7bc24d5c9 ("[PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address")
url: https://github.com/intel-lab-lkp/linux/commits/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
base: https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git 949d6b405e6160ae44baea39192d67b39cb7eeac
patch link: https://lore.kernel.org/netdev/20220722195406.1304948-2-joannelkoong(a)gmail.com
in testcase: boot
on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
If you fix the issue, kindly add following tag
Reported-by: kernel test robot <oliver.sang@intel.com>
[ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
[ 103.873143][ T486] addr:00007f9fe52a2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f928adcb58 index:1a1
[ 103.875128][ T486] file:libcrypto.so.1.1 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
[ 103.877339][ T486] CPU: 0 PID: 486 Comm: rsync Not tainted 5.19.0-rc7-01443-g03d56978dd24 #1
[ 103.879032][ T486] Call Trace:
[ 103.879742][ T486] <TASK>
[ 103.880329][ T486] ? simple_write_end+0x140/0x140
[ 103.881338][ T486] dump_stack_lvl+0x3b/0x53
[ 103.882274][ T486] ? __filemap_get_folio+0x780/0x780
[ 103.883270][ T486] print_bad_pte.cold+0x15b/0x1c5
[ 103.884202][ T486] vm_normal_page+0x65/0x140
[ 103.885062][ T486] zap_pte_range+0x23b/0x9c0
[ 103.885897][ T486] unmap_page_range+0x263/0x5c0
[ 103.886846][ T486] unmap_vmas+0x121/0x200
[ 103.887628][ T486] exit_mmap+0xb5/0x240
[ 103.888401][ T486] mmput+0x3b/0x140
[ 103.889134][ T486] exit_mm+0xff/0x180
[ 103.889877][ T486] do_exit+0x100/0x400
[ 103.890661][ T486] do_group_exit+0x3e/0x100
[ 103.891514][ T486] __x64_sys_exit_group+0x18/0x40
[ 103.892494][ T486] do_syscall_64+0x5d/0x80
[ 103.893294][ T486] ? do_user_addr_fault+0x257/0x6c0
[ 103.894238][ T486] ? lock_release+0x6e/0x100
[ 103.895171][ T486] ? up_read+0x12/0x40
[ 103.896036][ T486] ? exc_page_fault+0xb2/0x2c0
[ 103.897021][ T486] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
[ 103.898243][ T486] RIP: 0033:0x7f9fe5007699
[ 103.899149][ T486] Code: Unable to access opcode bytes at RIP 0x7f9fe500766f.
[ 103.900511][ T486] RSP: 002b:00007fff7e32c3a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[ 103.902027][ T486] RAX: ffffffffffffffda RBX: 00007f9fe50fc610 RCX: 00007f9fe5007699
[ 103.903477][ T486] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
[ 103.904943][ T486] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
[ 103.906384][ T486] R10: 000000000000000b R11: 0000000000000246 R12: 00007f9fe50fc610
[ 103.907823][ T486] R13: 0000000000000001 R14: 00007f9fe50fcae8 R15: 0000000000000000
[ 103.909290][ T486] </TASK>
[ 103.910423][ T486] Disabling lock debugging due to kernel taint
[ 107.503093][ T508] BUG: Bad page map in process rsync pte:ffff92f93b7fe508 pmd:13aa1c067
[ 107.504948][ T508] addr:00007fced9aa2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f92891ab58 index:9a
[ 107.507070][ T508] file:libzstd.so.1.4.8 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
[ 107.508825][ T508] CPU: 0 PID: 508 Comm: rsync Tainted: G B 5.19.0-rc7-01443-g03d56978dd24 #1
[ 107.510762][ T508] Call Trace:
[ 107.511458][ T508] <TASK>
[ 107.512058][ T508] ? simple_write_end+0x140/0x140
[ 107.513072][ T508] dump_stack_lvl+0x3b/0x53
[ 107.513990][ T508] ? __filemap_get_folio+0x780/0x780
[ 107.519166][ T508] print_bad_pte.cold+0x15b/0x1c5
[ 107.520032][ T508] vm_normal_page+0x65/0x140
[ 107.520802][ T508] zap_pte_range+0x23b/0x9c0
[ 107.521548][ T508] unmap_page_range+0x263/0x5c0
[ 107.522355][ T508] unmap_vmas+0x121/0x200
[ 107.523247][ T508] exit_mmap+0xb5/0x240
[ 107.524107][ T508] mmput+0x3b/0x140
[ 107.524908][ T508] exit_mm+0xff/0x180
[ 107.525716][ T508] do_exit+0x100/0x400
[ 107.526613][ T508] do_group_exit+0x3e/0x100
[ 107.527541][ T508] __x64_sys_exit_group+0x18/0x40
[ 107.528450][ T508] do_syscall_64+0x5d/0x80
[ 107.529368][ T508] ? up_read+0x12/0x40
[ 107.530228][ T508] ? do_user_addr_fault+0x257/0x6c0
[ 107.531121][ T508] ? rcu_read_lock_sched_held+0x5/0x40
[ 107.532046][ T508] ? exc_page_fault+0xb2/0x2c0
[ 107.532843][ T508] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
[ 107.533866][ T508] RIP: 0033:0x7fced95ff699
[ 107.534781][ T508] Code: Unable to access opcode bytes at RIP 0x7fced95ff66f.
[ 107.536225][ T508] RSP: 002b:00007fff162474c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[ 107.537871][ T508] RAX: ffffffffffffffda RBX: 00007fced96f4610 RCX: 00007fced95ff699
[ 107.539506][ T508] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
[ 107.541126][ T508] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
[ 107.542743][ T508] R10: 000000000000000b R11: 0000000000000246 R12: 00007fced96f4610
[ 107.544310][ T508] R13: 0000000000000001 R14: 00007fced96f4ae8 R15: 0000000000000000
[ 107.545881][ T508] </TASK>
To reproduce:
# build kernel
cd linux
cp config-5.19.0-rc7-01443-g03d56978dd24 .config
make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
cd <mod-install-dir>
find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
# if come across any failure that blocks the test,
# please remove ~/.lkp and /lkp dir to run from a clean state.
--
0-DAY CI Kernel Test Service
https://01.org/lkp
[-- Attachment #2: config-5.19.0-rc7-01443-g03d56978dd24 --]
[-- Type: text/plain, Size: 124837 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.19.0-rc7 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-11 (Debian 11.3.0-3) 11.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=110300
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_JIT is not set
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_DYNAMIC is not set
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_TICK_CPU_ACCOUNTING is not set
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_FORCE_TASKS_RCU=y
CONFIG_TASKS_RCU=y
CONFIG_FORCE_TASKS_RUDE_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_FORCE_TASKS_TRACE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_TASKS_TRACE_RCU_READ_MB=y
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_BPF is not set
# CONFIG_CGROUP_MISC is not set
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_NAMESPACES is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
CONFIG_RD_XZ=y
# CONFIG_RD_LZO is not set
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
# CONFIG_POSIX_TIMERS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
# CONFIG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# end of Kernel Performance Events And Counters
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_NR_GPIO=1024
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
# CONFIG_SMP is not set
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
CONFIG_GOLDFISH=y
# CONFIG_X86_CPU_RESCTRL is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_MID=y
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_X86_HV_CALLBACK_VECTOR=y
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_JAILHOUSE_GUEST=y
# CONFIG_ACRN_GUEST is not set
# CONFIG_INTEL_TDX_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
# CONFIG_CPU_SUP_AMD is not set
# CONFIG_CPU_SUP_HYGON is not set
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_CPU_SUP_ZHAOXIN is not set
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
CONFIG_BOOT_VESA_SUPPORT=y
CONFIG_NR_CPUS_RANGE_BEGIN=1
CONFIG_NR_CPUS_RANGE_END=1
CONFIG_NR_CPUS_DEFAULT=1
CONFIG_NR_CPUS=1
CONFIG_UP_LATE_INIT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_INJECT is not set
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# end of Performance monitoring
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_X86_IOPL_IOPERM is not set
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_LATE_LOADING is not set
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_X86_CPA_STATISTICS=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
# CONFIG_MTRR is not set
# CONFIG_ARCH_RANDOM is not set
# CONFIG_X86_UMIP is not set
CONFIG_CC_HAS_IBT=y
# CONFIG_X86_KERNEL_IBT is not set
# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_X86_SGX is not set
# CONFIG_EFI is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_KEXEC is not set
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
CONFIG_KEXEC_SIG=y
CONFIG_KEXEC_SIG_FORCE=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0x0
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_XONLY=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
CONFIG_STRICT_SIGALTSTACK_SIZE=y
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features
CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
CONFIG_SPECULATION_MITIGATIONS=y
# CONFIG_PAGE_TABLE_ISOLATION is not set
# CONFIG_RETPOLINE is not set
CONFIG_CPU_IBRS_ENTRY=y
# CONFIG_SLS is not set
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_FPDT is not set
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_TAD is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_IPMI is not set
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_ACPI_DPTF is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_ACPI_PFRUT is not set
# CONFIG_PMIC_OPREGION is not set
CONFIG_X86_PM_TIMER=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_CPU_IDLE_GOV_MENU is not set
CONFIG_CPU_IDLE_GOV_TEO=y
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle
# CONFIG_INTEL_IDLE is not set
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_ISA_BUS=y
CONFIG_ISA_DMA_API=y
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32_ABI is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
# end of Binary Emulations
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_GENERIC_ENTRY=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_JUMP_LABEL_HACK=y
CONFIG_HAVE_NOINSTR_HACK=y
CONFIG_HAVE_NOINSTR_VALIDATION=y
CONFIG_HAVE_UACCESS_VALIDATION=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_ISA_BUS_API=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_PROFILE_ALL is not set
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
CONFIG_BLK_INLINE_ENCRYPTION=y
CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
# CONFIG_ACORN_PARTITION_ADFS is not set
CONFIG_ACORN_PARTITION_POWERTEC=y
# CONFIG_ACORN_PARTITION_RISCIX is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
CONFIG_MQ_IOSCHED_KYBER=m
CONFIG_IOSCHED_BFQ=m
# end of IO Schedulers
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
# CONFIG_COREDUMP is not set
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SWAP=y
# CONFIG_ZSWAP is not set
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# end of SLAB allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_COMPAT_BRK=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_DEBUGFS=y
# CONFIG_CMA_SYSFS is not set
CONFIG_CMA_AREAS=7
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_VM_GET_PAGE_PROT=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_HMM_MIRROR=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# CONFIG_USERFAULTFD is not set
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_SMC=m
CONFIG_SMC_DIAG=m
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=m
# CONFIG_IP_MROUTE is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_NET_FOU=m
CONFIG_INET_AH=m
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
# CONFIG_NETFILTER is not set
# CONFIG_BPFILTER is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y
# end of DCCP CCIDs Configuration
#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
# end of DCCP Kernel Hacking
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=y
# CONFIG_ATM_CLIP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
# CONFIG_ATM_BR2684 is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
# CONFIG_L2TP_V3 is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
# CONFIG_IPDDP is not set
# CONFIG_X25 is not set
CONFIG_LAPB=m
CONFIG_PHONET=m
CONFIG_IEEE802154=m
CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y
CONFIG_IEEE802154_SOCKET=m
# CONFIG_MAC802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=m
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
CONFIG_NET_SCH_ETF=y
CONFIG_NET_SCH_TAPRIO=m
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_SKBPRIO=m
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=m
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_PLUG=y
CONFIG_NET_SCH_ETS=y
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=m
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
CONFIG_NET_CLS_MATCHALL=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_BATMAN_V is not set
# CONFIG_BATMAN_ADV_BLA is not set
CONFIG_BATMAN_ADV_DAT=y
# CONFIG_BATMAN_ADV_NC is not set
CONFIG_BATMAN_ADV_MCAST=y
CONFIG_BATMAN_ADV_DEBUG=y
# CONFIG_BATMAN_ADV_TRACING is not set
CONFIG_OPENVSWITCH=m
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
CONFIG_NET_NSH=m
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
CONFIG_QRTR=m
# CONFIG_QRTR_SMD is not set
# CONFIG_QRTR_TUN is not set
CONFIG_NET_NCSI=y
CONFIG_NCSI_OEM_CMD_GET_MAC=y
# CONFIG_NCSI_OEM_CMD_KEEP_PHY is not set
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_BT=m
# CONFIG_BT_BREDR is not set
CONFIG_BT_LE=y
# CONFIG_BT_LEDS is not set
# CONFIG_BT_MSFTEXT is not set
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
# CONFIG_BT_FEATURE_DEBUG is not set
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
# CONFIG_BT_MTKUART is not set
CONFIG_BT_VIRTIO=m
# end of Bluetooth device drivers
# CONFIG_AF_RXRPC is not set
CONFIG_AF_KCM=y
CONFIG_STREAM_PARSER=y
CONFIG_MCTP=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_RDMA=m
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
# CONFIG_CAIF_NETDEV is not set
CONFIG_CAIF_USB=m
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
# CONFIG_NFC is not set
CONFIG_PSAMPLE=y
CONFIG_NET_IFE=m
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=y
# CONFIG_ETHTOOL_NETLINK is not set
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIEASPM is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=m
CONFIG_PCI_PF_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_ECAM=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
CONFIG_PCIE_BUS_TUNE_OFF=y
# CONFIG_PCIE_BUS_DEFAULT is not set
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
# CONFIG_VGA_ARB is not set
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
CONFIG_PCI_HOST_COMMON=y
# CONFIG_PCI_HOST_GENERIC is not set
CONFIG_PCIE_XILINX=y
CONFIG_VMD=m
CONFIG_PCIE_MICROCHIP_HOST=y
#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_EP=y
CONFIG_PCIE_DW_PLAT=y
# CONFIG_PCIE_DW_PLAT_HOST is not set
CONFIG_PCIE_DW_PLAT_EP=y
CONFIG_PCIE_INTEL_GW=y
CONFIG_PCI_MESON=y
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
CONFIG_PCIE_CADENCE=y
CONFIG_PCIE_CADENCE_HOST=y
CONFIG_PCIE_CADENCE_PLAT=y
CONFIG_PCIE_CADENCE_PLAT_HOST=y
# CONFIG_PCIE_CADENCE_PLAT_EP is not set
CONFIG_PCI_J721E=y
CONFIG_PCI_J721E_HOST=y
# CONFIG_PCI_J721E_EP is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
# CONFIG_PCI_EPF_TEST is not set
# CONFIG_PCI_EPF_NTB is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=m
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
# CONFIG_YENTA_ENE_TUNE is not set
CONFIG_YENTA_TOSHIBA=y
CONFIG_RAPIDIO=m
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
# CONFIG_RAPIDIO_DMA_ENGINE is not set
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=m
CONFIG_RAPIDIO_CHMAN=m
CONFIG_RAPIDIO_MPORT_CDEV=m
#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_CPS_XX=m
CONFIG_RAPIDIO_CPS_GEN2=m
# CONFIG_RAPIDIO_RXS_GEN3 is not set
# end of RapidIO Switch drivers
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set
# CONFIG_FW_CACHE is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_WANT_DEV_COREDUMP=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_W1=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=m
CONFIG_REGMAP_SOUNDWIRE_MBQ=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
CONFIG_CONNECTOR=m
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol
# CONFIG_EDD is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_SYSFB=y
CONFIG_SYSFB_SIMPLEFB=y
CONFIG_CS_DSP=m
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
# CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is not set
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_FD_RAWCMD is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
# CONFIG_ZRAM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
CONFIG_BLK_DEV_RNBD=y
CONFIG_BLK_DEV_RNBD_CLIENT=m
#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
CONFIG_NVME_FABRICS=m
CONFIG_NVME_RDMA=m
CONFIG_NVME_FC=m
# CONFIG_NVME_TCP is not set
CONFIG_NVME_TARGET=y
# CONFIG_NVME_TARGET_PASSTHRU is not set
# CONFIG_NVME_TARGET_LOOP is not set
CONFIG_NVME_TARGET_RDMA=m
CONFIG_NVME_TARGET_FC=y
CONFIG_NVME_TARGET_FCLOOP=m
CONFIG_NVME_TARGET_TCP=m
# end of NVME Support
#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
CONFIG_DUMMY_IRQ=y
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
CONFIG_DS1682=m
CONFIG_VMWARE_BALLOON=y
# CONFIG_SRAM is not set
CONFIG_DW_XDATA_PCIE=y
# CONFIG_PCI_ENDPOINT_TEST is not set
CONFIG_XILINX_SDFEC=y
CONFIG_MISC_RTSX=y
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=m
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=m
CONFIG_EEPROM_EE1004=y
# end of EEPROM support
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=m
# CONFIG_INTEL_MEI_ME is not set
CONFIG_INTEL_MEI_TXE=m
CONFIG_VMWARE_VMCI=y
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
CONFIG_MISC_ALCOR_PCI=m
CONFIG_MISC_RTSX_PCI=y
CONFIG_HABANA_AI=m
CONFIG_UACCE=y
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=m
CONFIG_PVPANIC_PCI=m
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
# CONFIG_SCSI is not set
# end of SCSI device support
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BCACHE=m
CONFIG_BCACHE_DEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
# CONFIG_BCACHE_ASYNC_REGISTRATION is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
CONFIG_DM_EBS=m
CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
CONFIG_DM_DELAY=m
CONFIG_DM_DUST=m
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=y
# CONFIG_TCM_USER2 is not set
CONFIG_ISCSI_TARGET=y
CONFIG_SBP_TARGET=m
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
# CONFIG_FIREWIRE_OHCI is not set
# CONFIG_FIREWIRE_NET is not set
CONFIG_FIREWIRE_NOSY=y
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_RIONET is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
# CONFIG_CAIF_DRIVERS is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_CX_ECAT is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
CONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_TXGBE is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_LITEX=y
# CONFIG_LITEX_LITEETH is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_OCTEON_EP is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000_UART is not set
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
#
# MCTP Device Drivers
#
# CONFIG_MCTP_SERIAL is not set
# CONFIG_MCTP_TRANSPORT_I2C is not set
# end of MCTP Device Drivers
# CONFIG_MDIO_DEVICE is not set
#
# PCS device drivers
#
# end of PCS device drivers
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
CONFIG_INPUT_VIVALDIFMAP=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_STMPE is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_PS2_SMBUS=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
# CONFIG_SERIAL_8250_MEN_MCB is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_ASPEED_VUART is not set
CONFIG_SERIAL_8250_DWLIB=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y
# CONFIG_SERIAL_OF_PLATFORM is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_MEN_Z135 is not set
# CONFIG_SERIAL_SPRD is not set
# CONFIG_SERIAL_LITEUART is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_GOLDFISH_TTY is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
# CONFIG_RPMSG_TTY is not set
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_IPMB=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_IPMB_DEVICE_INTERFACE=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_BA431=y
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_CCTRNG is not set
CONFIG_HW_RANDOM_XIPHERA=y
CONFIG_APPLICOM=m
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=m
# CONFIG_XILLYBUS is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_GPMUX=m
# CONFIG_I2C_MUX_LTC4306 is not set
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_MUX_REG=m
CONFIG_I2C_DEMUX_PINCTRL=m
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=y
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=y
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NFORCE2_S4985=y
# CONFIG_I2C_NVIDIA_GPU is not set
CONFIG_I2C_SIS5595=m
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=m
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_AMDPSP is not set
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_EMEV2=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=y
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=y
CONFIG_I2C_VIRTIO=y
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=m
CONFIG_I2C_SLAVE_TESTUNIT=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=m
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_DA9062 is not set
# CONFIG_PINCTRL_EQUILIBRIUM is not set
# CONFIG_PINCTRL_MAX77620 is not set
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08=m
CONFIG_PINCTRL_MICROCHIP_SGPIO=y
# CONFIG_PINCTRL_OCELOT is not set
CONFIG_PINCTRL_PALMAS=m
CONFIG_PINCTRL_RK805=y
# CONFIG_PINCTRL_SINGLE is not set
# CONFIG_PINCTRL_STMFX is not set
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L35=y
CONFIG_PINCTRL_CS47L92=y
#
# Intel pinctrl drivers
#
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_LYNXPOINT is not set
CONFIG_PINCTRL_MERRIFIELD=m
# CONFIG_PINCTRL_ALDERLAKE is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_CANNONLAKE is not set
# CONFIG_PINCTRL_CEDARFORK is not set
# CONFIG_PINCTRL_DENVERTON is not set
# CONFIG_PINCTRL_ELKHARTLAKE is not set
# CONFIG_PINCTRL_EMMITSBURG is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_JASPERLAKE is not set
# CONFIG_PINCTRL_LAKEFIELD is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
# CONFIG_PINCTRL_TIGERLAKE is not set
# end of Intel pinctrl drivers
#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
# CONFIG_GPIO_CDEV is not set
CONFIG_GPIO_GENERIC=y
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=m
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_CADENCE=m
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_GRGPIO=y
CONFIG_GPIO_HLWD=y
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LOGICVC=m
CONFIG_GPIO_MB86S7X=m
# CONFIG_GPIO_MENZ127 is not set
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
CONFIG_GPIO_SIFIVE=y
CONFIG_GPIO_SIOX=y
CONFIG_GPIO_SYSCON=m
CONFIG_GPIO_VX855=m
CONFIG_GPIO_XILINX=y
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_104_DIO_48E=m
# CONFIG_GPIO_104_IDIO_16 is not set
CONFIG_GPIO_104_IDI_48=y
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_GPIO_MM=m
CONFIG_GPIO_IT87=y
# CONFIG_GPIO_SCH is not set
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_WINBOND=m
CONFIG_GPIO_WS16C48=m
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_GW_PLD is not set
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCA9570=y
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_BD9571MWV=m
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_KEMPLD=m
CONFIG_GPIO_LP3943=m
CONFIG_GPIO_LP873X=y
# CONFIG_GPIO_MADERA is not set
CONFIG_GPIO_MAX77620=y
# CONFIG_GPIO_MAX77650 is not set
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TPS65086=m
CONFIG_GPIO_TPS65218=m
CONFIG_GPIO_TPS6586X=y
# CONFIG_GPIO_TPS65910 is not set
CONFIG_GPIO_TPS65912=m
CONFIG_GPIO_TWL4030=y
# CONFIG_GPIO_WM8350 is not set
CONFIG_GPIO_WM8994=y
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
CONFIG_GPIO_BT8XX=y
CONFIG_GPIO_MERRIFIELD=m
CONFIG_GPIO_ML_IOH=y
CONFIG_GPIO_PCI_IDIO_16=m
CONFIG_GPIO_PCIE_IDIO_24=y
CONFIG_GPIO_RDC321X=m
# CONFIG_GPIO_SODAVILLE is not set
# end of PCI GPIO expanders
#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=m
CONFIG_GPIO_MOCKUP=m
CONFIG_GPIO_VIRTIO=y
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m
CONFIG_W1_MASTER_SGI=m
# end of 1-wire Bus Masters
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2405 is not set
CONFIG_W1_SLAVE_DS2408=m
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2406=m
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2805 is not set
CONFIG_W1_SLAVE_DS2430=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=m
CONFIG_W1_SLAVE_DS250X=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_DS28E17=m
# end of 1-wire Slaves
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_ATC260X is not set
CONFIG_POWER_RESET_GPIO=y
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_REGULATOR is not set
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_RESET_TPS65086=y
# CONFIG_POWER_RESET_SYSCON is not set
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
CONFIG_REBOOT_MODE=m
# CONFIG_SYSCON_REBOOT_MODE is not set
CONFIG_NVMEM_REBOOT_MODE=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
# CONFIG_IP5XXX_POWER is not set
CONFIG_MAX8925_POWER=y
CONFIG_WM8350_POWER=m
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_CHARGER_ADP5061 is not set
CONFIG_BATTERY_ACT8945A=m
# CONFIG_BATTERY_CW2015 is not set
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=m
CONFIG_MANAGER_SBS=m
CONFIG_BATTERY_BQ27XXX=m
CONFIG_BATTERY_BQ27XXX_I2C=m
CONFIG_BATTERY_BQ27XXX_HDQ=m
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
CONFIG_BATTERY_DA9030=m
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_BATTERY_MAX1721X=m
# CONFIG_CHARGER_PCF50633 is not set
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_LP8727=m
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LT3651=m
# CONFIG_CHARGER_LTC4162L is not set
CONFIG_CHARGER_DETECTOR_MAX14656=m
CONFIG_CHARGER_MAX77650=m
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_MAX8997 is not set
CONFIG_CHARGER_MAX8998=m
CONFIG_CHARGER_BQ2415X=m
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=m
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=m
# CONFIG_CHARGER_BQ25980 is not set
CONFIG_CHARGER_BQ256XX=y
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
CONFIG_BATTERY_GOLDFISH=m
# CONFIG_BATTERY_RT5033 is not set
CONFIG_CHARGER_RT9455=m
CONFIG_CHARGER_UCS1002=y
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=m
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=m
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_AHT10=m
CONFIG_SENSORS_AS370=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_AXI_FAN_CONTROL=m
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ASPEED=m
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_DELL_SMM is not set
CONFIG_SENSORS_DA9055=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
# CONFIG_SENSORS_GSC is not set
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC2947=m
CONFIG_SENSORS_LTC2947_I2C=m
CONFIG_SENSORS_LTC2990=m
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=m
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX127=m
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31730 is not set
CONFIG_SENSORS_MAX6620=m
CONFIG_SENSORS_MAX6621=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MAX31790=m
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_TC654 is not set
CONFIG_SENSORS_TPS23861=m
CONFIG_SENSORS_MENF21BMC_HWMON=m
# CONFIG_SENSORS_MR75203 is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775_CORE=m
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT6775_I2C is not set
CONFIG_SENSORS_NCT7802=m
# CONFIG_SENSORS_NPCM7XX is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1266=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_BEL_PFE=m
# CONFIG_SENSORS_BPA_RS600 is not set
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
# CONFIG_SENSORS_FSP_3Y is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
CONFIG_SENSORS_DPS920AB=m
CONFIG_SENSORS_INSPUR_IPSPS=m
CONFIG_SENSORS_IR35221=m
CONFIG_SENSORS_IR36021=m
CONFIG_SENSORS_IR38064=m
# CONFIG_SENSORS_IR38064_REGULATOR is not set
CONFIG_SENSORS_IRPS5401=m
CONFIG_SENSORS_ISL68137=m
CONFIG_SENSORS_LM25066=m
# CONFIG_SENSORS_LM25066_REGULATOR is not set
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=m
CONFIG_SENSORS_MAX15301=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX16601=m
CONFIG_SENSORS_MAX20730=m
CONFIG_SENSORS_MAX20751=m
CONFIG_SENSORS_MAX31785=m
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_MP2888=m
CONFIG_SENSORS_MP2975=m
# CONFIG_SENSORS_MP5023 is not set
CONFIG_SENSORS_PIM4328=m
# CONFIG_SENSORS_PLI1209BC is not set
CONFIG_SENSORS_PM6764TR=m
CONFIG_SENSORS_PXE1610=m
CONFIG_SENSORS_Q54SJ108A2=m
# CONFIG_SENSORS_STPDDC60 is not set
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_TPS53679=m
CONFIG_SENSORS_UCD9000=m
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_XDPE152 is not set
# CONFIG_SENSORS_XDPE122 is not set
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SBTSI=m
CONFIG_SENSORS_SBRMI=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
CONFIG_SENSORS_SHT4x=m
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_SY7636A is not set
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_STTS751=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
CONFIG_SENSORS_TC74=m
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP108=m
CONFIG_SENSORS_TMP401=m
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
CONFIG_SENSORS_TMP513=m
# CONFIG_SENSORS_VIA_CPUTEMP is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_WM8350 is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ASUS_EC is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_OF is not set
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_MMIO=y
# CONFIG_MAX77620_THERMAL is not set
# CONFIG_DA9062_THERMAL is not set
#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_PKG_TEMP_THERMAL=y
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_INTEL_TCC_COOLING is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_INTEL_HFI_THERMAL is not set
# end of Intel thermal drivers
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=m
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=m
CONFIG_MFD_BCM590XX=m
CONFIG_MFD_BD9571MWV=m
# CONFIG_MFD_AXP20X_I2C is not set
CONFIG_MFD_MADERA=y
# CONFIG_MFD_MADERA_I2C is not set
# CONFIG_MFD_CS47L15 is not set
CONFIG_MFD_CS47L35=y
# CONFIG_MFD_CS47L85 is not set
# CONFIG_MFD_CS47L90 is not set
CONFIG_MFD_CS47L92=y
CONFIG_PMIC_DA903X=y
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
CONFIG_MFD_GATEWORKS_GSC=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_MFD_MP2629=y
CONFIG_MFD_HI6421_PMIC=m
CONFIG_HTC_PASIC3=m
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=y
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
# CONFIG_INTEL_SOC_PMIC_MRFLD is not set
CONFIG_MFD_INTEL_LPSS=m
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
CONFIG_MFD_INTEL_LPSS_PCI=m
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=y
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
CONFIG_MFD_MENF21BMC=y
# CONFIG_MFD_NTXEC is not set
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
# CONFIG_UCB1400_CORE is not set
CONFIG_MFD_RDC321X=m
# CONFIG_MFD_RT4831 is not set
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_RK808=y
CONFIG_MFD_RN5T618=y
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SIMPLE_MFD_I2C is not set
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
CONFIG_MFD_SKY81452=y
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
# CONFIG_STMPE_I2C is not set
# end of STMicroelectronics STMPE Interface Drivers
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=m
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
CONFIG_MFD_TPS65086=m
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TI_LP873X=y
# CONFIG_MFD_TI_LP87565 is not set
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STPMIC1 is not set
CONFIG_MFD_STMFX=m
CONFIG_MFD_ATC260X=y
CONFIG_MFD_ATC260X_I2C=y
CONFIG_MFD_QCOM_PM8008=m
CONFIG_RAVE_SP_CORE=m
CONFIG_MFD_RSMU_I2C=y
# end of Multifunction device drivers
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=m
# CONFIG_REGULATOR_ACT8945A is not set
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARIZONA_LDO1=m
CONFIG_REGULATOR_ARIZONA_MICSUPP=m
CONFIG_REGULATOR_ATC260X=y
CONFIG_REGULATOR_BCM590XX=m
CONFIG_REGULATOR_BD9571MWV=m
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9055 is not set
CONFIG_REGULATOR_DA9062=y
CONFIG_REGULATOR_DA9063=m
# CONFIG_REGULATOR_DA9121 is not set
CONFIG_REGULATOR_DA9210=y
# CONFIG_REGULATOR_DA9211 is not set
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_FAN53880=y
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_HI6421 is not set
CONFIG_REGULATOR_HI6421V530=m
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP873X=y
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX77620=m
CONFIG_REGULATOR_MAX77650=y
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8893 is not set
# CONFIG_REGULATOR_MAX8907 is not set
CONFIG_REGULATOR_MAX8925=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX8998=y
# CONFIG_REGULATOR_MAX20086 is not set
CONFIG_REGULATOR_MAX77693=y
# CONFIG_REGULATOR_MAX77826 is not set
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_MCP16502=m
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MP886X=y
CONFIG_REGULATOR_MPQ7920=m
CONFIG_REGULATOR_MT6311=m
# CONFIG_REGULATOR_PALMAS is not set
CONFIG_REGULATOR_PCA9450=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_PF8X00=m
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=m
# CONFIG_REGULATOR_PV88080 is not set
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY=y
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_RN5T618=m
CONFIG_REGULATOR_RT4801=m
# CONFIG_REGULATOR_RT5033 is not set
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5759 is not set
# CONFIG_REGULATOR_RT6160 is not set
CONFIG_REGULATOR_RT6245=y
CONFIG_REGULATOR_RTQ2134=y
CONFIG_REGULATOR_RTMV20=y
# CONFIG_REGULATOR_RTQ6752 is not set
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_SLG51000=m
# CONFIG_REGULATOR_SY7636A is not set
CONFIG_REGULATOR_SY8106A=y
# CONFIG_REGULATOR_SY8824X is not set
# CONFIG_REGULATOR_SY8827N is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS6105X is not set
CONFIG_REGULATOR_TPS62360=y
# CONFIG_REGULATOR_TPS6286X is not set
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=m
# CONFIG_REGULATOR_TPS65086 is not set
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_TPS65218 is not set
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65910=m
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_TWL4030=m
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_WM8350=m
# CONFIG_REGULATOR_WM8994 is not set
# CONFIG_RC_CORE is not set
#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=m
# CONFIG_AGP_VIA is not set
CONFIG_INTEL_GTT=y
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set
#
# ARM devices
#
# end of ARM devices
#
# Frame buffer Devices
#
# CONFIG_FB is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_KTD253=y
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_DA903X=m
# CONFIG_BACKLIGHT_MAX8925 is not set
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_QCOM_WLED=y
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_ADP5520=y
CONFIG_BACKLIGHT_ADP8860=y
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_88PM860X=y
CONFIG_BACKLIGHT_PCF50633=m
CONFIG_BACKLIGHT_AAT2870=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_PANDORA=y
# CONFIG_BACKLIGHT_SKY81452 is not set
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=m
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=m
CONFIG_BACKLIGHT_RAVE_SP=m
CONFIG_BACKLIGHT_LED=y
# end of Backlight & LCD device support
# end of Graphics support
CONFIG_SOUND=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
# CONFIG_SND_PCM_TIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
# CONFIG_SND_PCM_XRUN_DEBUG is not set
# CONFIG_SND_CTL_VALIDATION is not set
CONFIG_SND_JACK_INJECTION_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_VIRMIDI=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_SERIAL_GENERIC is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
# CONFIG_SND_PCI is not set
#
# HD-Audio
#
# end of HD-Audio
CONFIG_SND_HDA_PREALLOC_SIZE=0
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=m
CONFIG_SND_INTEL_SOUNDWIRE_ACPI=m
# CONFIG_SND_FIREWIRE is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_ACPI=m
CONFIG_SND_SOC_ADI=m
CONFIG_SND_SOC_ADI_AXI_I2S=m
CONFIG_SND_SOC_ADI_AXI_SPDIF=m
# CONFIG_SND_SOC_AMD_ACP is not set
CONFIG_SND_SOC_AMD_ACP3x=m
# CONFIG_SND_SOC_AMD_RENOIR is not set
CONFIG_SND_SOC_AMD_ACP5x=m
CONFIG_SND_SOC_AMD_ACP6x=m
# CONFIG_SND_SOC_AMD_YC_MACH is not set
# CONFIG_SND_AMD_ACP_CONFIG is not set
# CONFIG_SND_SOC_AMD_ACP_COMMON is not set
CONFIG_SND_ATMEL_SOC=m
# CONFIG_SND_SOC_MIKROE_PROTO is not set
# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set
CONFIG_SND_DESIGNWARE_I2S=m
CONFIG_SND_DESIGNWARE_PCM=y
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=m
CONFIG_SND_SOC_FSL_SAI=m
# CONFIG_SND_SOC_FSL_MQS is not set
CONFIG_SND_SOC_FSL_AUDMIX=m
CONFIG_SND_SOC_FSL_SSI=m
CONFIG_SND_SOC_FSL_SPDIF=m
CONFIG_SND_SOC_FSL_ESAI=m
# CONFIG_SND_SOC_FSL_MICFIL is not set
CONFIG_SND_SOC_FSL_EASRC=m
CONFIG_SND_SOC_FSL_XCVR=m
CONFIG_SND_SOC_FSL_RPMSG=m
CONFIG_SND_SOC_IMX_AUDMUX=m
# end of SoC Audio for Freescale CPUs
CONFIG_SND_I2S_HI6210_I2S=m
# CONFIG_SND_SOC_IMG is not set
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
# CONFIG_SND_SOC_INTEL_CATPT is not set
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m
# CONFIG_SND_SOC_INTEL_SKYLAKE is not set
# CONFIG_SND_SOC_INTEL_SKL is not set
# CONFIG_SND_SOC_INTEL_APL is not set
# CONFIG_SND_SOC_INTEL_KBL is not set
# CONFIG_SND_SOC_INTEL_GLK is not set
# CONFIG_SND_SOC_INTEL_CNL is not set
# CONFIG_SND_SOC_INTEL_CFL is not set
# CONFIG_SND_SOC_INTEL_CML_H is not set
# CONFIG_SND_SOC_INTEL_CML_LP is not set
CONFIG_SND_SOC_ACPI_INTEL_MATCH=m
# CONFIG_SND_SOC_INTEL_AVS is not set
CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES=y
# CONFIG_SND_SOC_INTEL_SOF_WM8804_MACH is not set
CONFIG_SND_SOC_MTK_BTCVSD=m
CONFIG_SND_SOC_SOF_TOPLEVEL=y
CONFIG_SND_SOC_SOF_PCI_DEV=m
CONFIG_SND_SOC_SOF_PCI=m
# CONFIG_SND_SOC_SOF_ACPI is not set
CONFIG_SND_SOC_SOF_OF=m
CONFIG_SND_SOC_SOF_DEBUG_PROBES=m
CONFIG_SND_SOC_SOF_CLIENT=m
# CONFIG_SND_SOC_SOF_DEVELOPER_SUPPORT is not set
CONFIG_SND_SOC_SOF=m
# CONFIG_SND_SOC_SOF_AMD_TOPLEVEL is not set
CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y
CONFIG_SND_SOC_SOF_INTEL_COMMON=m
# CONFIG_SND_SOC_SOF_MERRIFIELD is not set
CONFIG_SND_SOC_SOF_INTEL_APL=m
CONFIG_SND_SOC_SOF_APOLLOLAKE=m
CONFIG_SND_SOC_SOF_GEMINILAKE=m
CONFIG_SND_SOC_SOF_INTEL_CNL=m
CONFIG_SND_SOC_SOF_CANNONLAKE=m
# CONFIG_SND_SOC_SOF_COFFEELAKE is not set
# CONFIG_SND_SOC_SOF_COMETLAKE is not set
CONFIG_SND_SOC_SOF_INTEL_ICL=m
# CONFIG_SND_SOC_SOF_ICELAKE is not set
CONFIG_SND_SOC_SOF_JASPERLAKE=m
CONFIG_SND_SOC_SOF_INTEL_TGL=m
# CONFIG_SND_SOC_SOF_TIGERLAKE is not set
CONFIG_SND_SOC_SOF_ELKHARTLAKE=m
CONFIG_SND_SOC_SOF_ALDERLAKE=m
CONFIG_SND_SOC_SOF_HDA_COMMON=m
# CONFIG_SND_SOC_SOF_HDA_LINK is not set
CONFIG_SND_SOC_SOF_HDA_LINK_BASELINE=m
CONFIG_SND_SOC_SOF_HDA_PROBES=m
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=m
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE=m
CONFIG_SND_SOC_SOF_XTENSA=m
#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support
# CONFIG_SND_SOC_XILINX_I2S is not set
# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set
# CONFIG_SND_SOC_XILINX_SPDIF is not set
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
#
# CODEC drivers
#
CONFIG_SND_SOC_WM_ADSP=m
CONFIG_SND_SOC_AC97_CODEC=m
CONFIG_SND_SOC_ADAU_UTILS=m
# CONFIG_SND_SOC_ADAU1372_I2C is not set
CONFIG_SND_SOC_ADAU1701=m
CONFIG_SND_SOC_ADAU17X1=m
CONFIG_SND_SOC_ADAU1761=m
CONFIG_SND_SOC_ADAU1761_I2C=m
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_ADAU7118=m
# CONFIG_SND_SOC_ADAU7118_HW is not set
CONFIG_SND_SOC_ADAU7118_I2C=m
CONFIG_SND_SOC_AK4118=m
# CONFIG_SND_SOC_AK4375 is not set
CONFIG_SND_SOC_AK4458=m
CONFIG_SND_SOC_AK4554=m
CONFIG_SND_SOC_AK4613=m
# CONFIG_SND_SOC_AK4642 is not set
CONFIG_SND_SOC_AK5386=m
CONFIG_SND_SOC_AK5558=m
# CONFIG_SND_SOC_ALC5623 is not set
# CONFIG_SND_SOC_AW8738 is not set
CONFIG_SND_SOC_BD28623=m
# CONFIG_SND_SOC_BT_SCO is not set
CONFIG_SND_SOC_CS35L32=m
CONFIG_SND_SOC_CS35L33=m
CONFIG_SND_SOC_CS35L34=m
CONFIG_SND_SOC_CS35L35=m
CONFIG_SND_SOC_CS35L36=m
CONFIG_SND_SOC_CS35L41_LIB=m
CONFIG_SND_SOC_CS35L41=m
CONFIG_SND_SOC_CS35L41_I2C=m
# CONFIG_SND_SOC_CS35L45_I2C is not set
CONFIG_SND_SOC_CS42L42=m
# CONFIG_SND_SOC_CS42L51_I2C is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
CONFIG_SND_SOC_CS42L73=m
CONFIG_SND_SOC_CS4234=m
CONFIG_SND_SOC_CS4265=m
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271_I2C is not set
CONFIG_SND_SOC_CS42XX8=m
CONFIG_SND_SOC_CS42XX8_I2C=m
CONFIG_SND_SOC_CS43130=m
CONFIG_SND_SOC_CS4341=m
# CONFIG_SND_SOC_CS4349 is not set
CONFIG_SND_SOC_CS53L30=m
# CONFIG_SND_SOC_CX2072X is not set
CONFIG_SND_SOC_DA7213=m
CONFIG_SND_SOC_DMIC=m
# CONFIG_SND_SOC_ES7134 is not set
CONFIG_SND_SOC_ES7241=m
# CONFIG_SND_SOC_ES8316 is not set
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_I2C=m
CONFIG_SND_SOC_GTM601=m
CONFIG_SND_SOC_ICS43432=m
# CONFIG_SND_SOC_INNO_RK3036 is not set
CONFIG_SND_SOC_MAX98088=m
CONFIG_SND_SOC_MAX98357A=m
CONFIG_SND_SOC_MAX98504=m
CONFIG_SND_SOC_MAX9867=m
# CONFIG_SND_SOC_MAX98927 is not set
# CONFIG_SND_SOC_MAX98520 is not set
CONFIG_SND_SOC_MAX98373=m
CONFIG_SND_SOC_MAX98373_I2C=m
# CONFIG_SND_SOC_MAX98373_SDW is not set
# CONFIG_SND_SOC_MAX98390 is not set
# CONFIG_SND_SOC_MAX98396 is not set
CONFIG_SND_SOC_MAX9860=m
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
CONFIG_SND_SOC_PCM1681=m
CONFIG_SND_SOC_PCM1789=m
CONFIG_SND_SOC_PCM1789_I2C=m
CONFIG_SND_SOC_PCM179X=m
CONFIG_SND_SOC_PCM179X_I2C=m
CONFIG_SND_SOC_PCM186X=m
CONFIG_SND_SOC_PCM186X_I2C=m
CONFIG_SND_SOC_PCM3060=m
CONFIG_SND_SOC_PCM3060_I2C=m
CONFIG_SND_SOC_PCM3168A=m
CONFIG_SND_SOC_PCM3168A_I2C=m
CONFIG_SND_SOC_PCM5102A=m
# CONFIG_SND_SOC_PCM512x_I2C is not set
CONFIG_SND_SOC_RK3328=m
# CONFIG_SND_SOC_RK817 is not set
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RT1308_SDW=m
CONFIG_SND_SOC_RT1316_SDW=m
CONFIG_SND_SOC_RT5616=m
CONFIG_SND_SOC_RT5631=m
CONFIG_SND_SOC_RT5640=m
CONFIG_SND_SOC_RT5659=m
CONFIG_SND_SOC_RT5682=m
CONFIG_SND_SOC_RT5682_SDW=m
CONFIG_SND_SOC_RT700=m
CONFIG_SND_SOC_RT700_SDW=m
CONFIG_SND_SOC_RT711=m
CONFIG_SND_SOC_RT711_SDW=m
CONFIG_SND_SOC_RT711_SDCA_SDW=m
CONFIG_SND_SOC_RT715=m
CONFIG_SND_SOC_RT715_SDW=m
CONFIG_SND_SOC_RT715_SDCA_SDW=m
# CONFIG_SND_SOC_RT9120 is not set
CONFIG_SND_SOC_SDW_MOCKUP=m
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_I2C=m
CONFIG_SND_SOC_SIGMADSP_REGMAP=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
CONFIG_SND_SOC_SIMPLE_MUX=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SSM2305=m
# CONFIG_SND_SOC_SSM2518 is not set
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_SSM2602_I2C=m
CONFIG_SND_SOC_SSM4567=m
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
CONFIG_SND_SOC_STI_SAS=m
CONFIG_SND_SOC_TAS2552=m
# CONFIG_SND_SOC_TAS2562 is not set
CONFIG_SND_SOC_TAS2764=m
# CONFIG_SND_SOC_TAS2770 is not set
CONFIG_SND_SOC_TAS5086=m
CONFIG_SND_SOC_TAS571X=m
CONFIG_SND_SOC_TAS5720=m
# CONFIG_SND_SOC_TAS5805M is not set
# CONFIG_SND_SOC_TAS6424 is not set
CONFIG_SND_SOC_TDA7419=m
CONFIG_SND_SOC_TFA9879=m
# CONFIG_SND_SOC_TFA989X is not set
# CONFIG_SND_SOC_TLV320ADC3XXX is not set
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
CONFIG_SND_SOC_TLV320AIC31XX=m
CONFIG_SND_SOC_TLV320AIC32X4=m
CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TLV320AIC3X_I2C=m
# CONFIG_SND_SOC_TLV320ADCX140 is not set
CONFIG_SND_SOC_TS3A227E=m
# CONFIG_SND_SOC_TSCS42XX is not set
# CONFIG_SND_SOC_TSCS454 is not set
# CONFIG_SND_SOC_UDA1334 is not set
CONFIG_SND_SOC_WCD_MBHC=m
CONFIG_SND_SOC_WCD938X=m
CONFIG_SND_SOC_WCD938X_SDW=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8524=m
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
CONFIG_SND_SOC_WM8728=m
# CONFIG_SND_SOC_WM8731_I2C is not set
CONFIG_SND_SOC_WM8737=m
CONFIG_SND_SOC_WM8741=m
# CONFIG_SND_SOC_WM8750 is not set
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8782=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8804_I2C=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8904=m
# CONFIG_SND_SOC_WM8940 is not set
CONFIG_SND_SOC_WM8960=m
# CONFIG_SND_SOC_WM8962 is not set
# CONFIG_SND_SOC_WM8974 is not set
# CONFIG_SND_SOC_WM8978 is not set
# CONFIG_SND_SOC_WM8985 is not set
CONFIG_SND_SOC_WSA881X=m
# CONFIG_SND_SOC_MAX9759 is not set
# CONFIG_SND_SOC_MT6351 is not set
CONFIG_SND_SOC_MT6358=m
CONFIG_SND_SOC_MT6660=m
CONFIG_SND_SOC_NAU8315=m
# CONFIG_SND_SOC_NAU8540 is not set
# CONFIG_SND_SOC_NAU8810 is not set
CONFIG_SND_SOC_NAU8821=m
CONFIG_SND_SOC_NAU8822=m
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SOC_LPASS_MACRO_COMMON=m
CONFIG_SND_SOC_LPASS_WSA_MACRO=m
CONFIG_SND_SOC_LPASS_VA_MACRO=m
# CONFIG_SND_SOC_LPASS_RX_MACRO is not set
CONFIG_SND_SOC_LPASS_TX_MACRO=m
# end of CODEC drivers
CONFIG_SND_SIMPLE_CARD_UTILS=m
# CONFIG_SND_SIMPLE_CARD is not set
CONFIG_SND_AUDIO_GRAPH_CARD=m
# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set
# CONFIG_SND_TEST_COMPONENT is not set
# CONFIG_SND_X86 is not set
CONFIG_SND_VIRTIO=m
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NINTENDO is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PLAYSTATION is not set
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# I2C HID support
#
# CONFIG_I2C_HID_ACPI is not set
# CONFIG_I2C_HID_OF is not set
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support
#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
# end of Intel ISH HID support
#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
CONFIG_USB_PCI=y
#
# USB port drivers
#
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_TAHVO_USB is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=m
CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
# CONFIG_MEMSTICK_REALTEK_PCI is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_CLASS_MULTICOLOR=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
CONFIG_LEDS_88PM860X=m
# CONFIG_LEDS_AN30259A is not set
CONFIG_LEDS_AW2013=y
CONFIG_LEDS_BCM6328=y
# CONFIG_LEDS_BCM6358 is not set
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3532=m
# CONFIG_LEDS_LM3533 is not set
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_LM3692X=y
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
# CONFIG_LEDS_LP50XX is not set
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA955X_GPIO is not set
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM8350=y
# CONFIG_LEDS_DA903X is not set
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_ADP5520=y
CONFIG_LEDS_MC13783=m
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TLC591XX=y
# CONFIG_LEDS_MAX77650 is not set
CONFIG_LEDS_MAX8997=y
# CONFIG_LEDS_LM355x is not set
CONFIG_LEDS_MENF21BMC=y
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_MLXREG=m
CONFIG_LEDS_USER=y
# CONFIG_LEDS_NIC78BX is not set
CONFIG_LEDS_TI_LMU_COMMON=m
CONFIG_LEDS_LM3697=m
# CONFIG_LEDS_TPS6105X is not set
CONFIG_LEDS_LGM=y
#
# Flash and Torch LED drivers
#
#
# RGB LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_ACTIVITY=y
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_LEDS_TRIGGER_NETDEV=m
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_VIRT_DMA=y
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_EFA=m
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_OCRDMA is not set
# CONFIG_INFINIBAND_RDMAVT is not set
# CONFIG_RDMA_RXE is not set
CONFIG_RDMA_SIW=m
# CONFIG_INFINIBAND_IPOIB is not set
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISERT=m
CONFIG_INFINIBAND_RTRS=m
CONFIG_INFINIBAND_RTRS_CLIENT=m
# CONFIG_INFINIBAND_RTRS_SERVER is not set
# CONFIG_INFINIBAND_OPA_VNIC is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_DW_AXI_DMAC=m
# CONFIG_FSL_EDMA is not set
CONFIG_INTEL_IDMA64=m
CONFIG_INTEL_IDXD_BUS=y
CONFIG_INTEL_IDXD_COMPAT=y
CONFIG_INTEL_IOATDMA=m
CONFIG_PLX_DMA=m
CONFIG_XILINX_ZYNQMP_DPDMA=y
# CONFIG_AMD_PTDMA is not set
CONFIG_QCOM_HIDMA_MGMT=y
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
# CONFIG_DW_DMAC is not set
CONFIG_DW_DMAC_PCI=y
CONFIG_DW_EDMA=m
CONFIG_DW_EDMA_PCIE=m
CONFIG_HSU_DMA=y
CONFIG_HSU_DMA_PCI=y
# CONFIG_SF_PDMA is not set
CONFIG_INTEL_LDMA=y
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
CONFIG_DMABUF_DEBUG=y
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
# CONFIG_DMABUF_HEAPS_SYSTEM is not set
# end of DMABUF options
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=m
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=m
# CONFIG_UIO_PCI_GENERIC is not set
CONFIG_UIO_NETX=m
CONFIG_UIO_PRUSS=m
CONFIG_UIO_MF624=m
CONFIG_VFIO=m
CONFIG_VFIO_IOMMU_TYPE1=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
# CONFIG_VFIO_PCI is not set
# CONFIG_VFIO_MDEV is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VMGENID=y
# CONFIG_VBOXGUEST is not set
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VDPA is not set
# CONFIG_VHOST_MENU is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# end of Microsoft Hyper-V guest support
CONFIG_GREYBUS=m
# CONFIG_COMEDI is not set
CONFIG_STAGING=y
# CONFIG_RTLLIB is not set
# CONFIG_STAGING_MEDIA is not set
# CONFIG_STAGING_BOARD is not set
# CONFIG_FIREWIRE_SERIAL is not set
CONFIG_COMMON_CLK_XLNX_CLKWZRD=m
# CONFIG_GREYBUS_AUDIO is not set
CONFIG_GREYBUS_BOOTROM=m
# CONFIG_GREYBUS_HID is not set
CONFIG_GREYBUS_LIGHT=m
CONFIG_GREYBUS_LOG=m
CONFIG_GREYBUS_LOOPBACK=m
CONFIG_GREYBUS_POWER=m
CONFIG_GREYBUS_RAW=m
# CONFIG_GREYBUS_VIBRATOR is not set
# CONFIG_GREYBUS_BRIDGED_PHY is not set
CONFIG_XIL_AXIS_FIFO=y
CONFIG_FIELDBUS_DEV=m
CONFIG_HMS_ANYBUSS_BUS=m
CONFIG_ARCX_ANYBUS_CONTROLLER=m
CONFIG_HMS_PROFINET=m
# CONFIG_QLGE is not set
#
# VME Device Drivers
#
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ACER_WIRELESS is not set
# CONFIG_ADV_SWBUTTON is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ASUS_TF103C_DOCK is not set
# CONFIG_X86_PLATFORM_DRIVERS_DELL is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_WIRELESS_HOTKEY is not set
CONFIG_IBM_RTL=y
# CONFIG_SENSORS_HDAPS is not set
CONFIG_INTEL_ATOMISP2_PDX86=y
# CONFIG_INTEL_ATOMISP2_LED is not set
CONFIG_INTEL_ATOMISP2_PM=y
# CONFIG_INTEL_SAR_INT1092 is not set
# CONFIG_INTEL_SKL_INT3472 is not set
# CONFIG_INTEL_PMC_CORE is not set
#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support
#
# Intel Uncore Frequency Control
#
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
# end of Intel Uncore Frequency Control
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_INT0002_VGPIO is not set
CONFIG_INTEL_PUNIT_IPC=m
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_INTEL_VSEC is not set
# CONFIG_PCENGINES_APU2 is not set
# CONFIG_BARCO_P50_GPIO is not set
CONFIG_SAMSUNG_LAPTOP=y
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_SYSTEM76_ACPI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
CONFIG_MLX_PLATFORM=m
# CONFIG_INTEL_IPS is not set
CONFIG_INTEL_SCU_IPC=y
CONFIG_INTEL_SCU=y
CONFIG_INTEL_SCU_PCI=y
# CONFIG_INTEL_SCU_PLATFORM is not set
CONFIG_INTEL_SCU_IPC_UTIL=y
# CONFIG_SIEMENS_SIMATIC_IPC is not set
# CONFIG_WINMATE_FM07_KEYS is not set
CONFIG_PMC_ATOM=y
# CONFIG_GOLDFISH_PIPE is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_HOTPLUG is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_SURFACE_AGGREGATOR is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_MAX77686=m
# CONFIG_COMMON_CLK_MAX9485 is not set
CONFIG_COMMON_CLK_RK808=m
CONFIG_COMMON_CLK_SI5341=m
# CONFIG_COMMON_CLK_SI5351 is not set
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI544=y
# CONFIG_COMMON_CLK_SI570 is not set
CONFIG_COMMON_CLK_CDCE706=m
# CONFIG_COMMON_CLK_CDCE925 is not set
CONFIG_COMMON_CLK_CS2000_CP=m
CONFIG_COMMON_CLK_AXI_CLKGEN=m
CONFIG_COMMON_CLK_PALMAS=y
# CONFIG_COMMON_CLK_RS9_PCIE is not set
# CONFIG_COMMON_CLK_VC5 is not set
CONFIG_COMMON_CLK_FIXED_MMIO=y
# CONFIG_CLK_LGM_CGU is not set
CONFIG_XILINX_VCU=m
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
CONFIG_DW_APB_TIMER=y
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_PLATFORM_MHU=m
# CONFIG_PCC is not set
CONFIG_ALTERA_MBOX=y
# CONFIG_MAILBOX_TEST is not set
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
# CONFIG_REMOTEPROC_CDEV is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
CONFIG_RPMSG=m
CONFIG_RPMSG_CHAR=m
# CONFIG_RPMSG_CTRL is not set
CONFIG_RPMSG_NS=m
CONFIG_RPMSG_QCOM_GLINK=m
CONFIG_RPMSG_QCOM_GLINK_RPM=m
CONFIG_RPMSG_VIRTIO=m
# end of Rpmsg drivers
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_CADENCE=m
CONFIG_SOUNDWIRE_INTEL=m
CONFIG_SOUNDWIRE_QCOM=m
CONFIG_SOUNDWIRE_GENERIC_ALLOCATION=m
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
CONFIG_LITEX=y
CONFIG_LITEX_SOC_CONTROLLER=m
# end of Enable LiteX SoC Builder specific drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_FSA9480 is not set
CONFIG_EXTCON_GPIO=m
# CONFIG_EXTCON_INTEL_INT3496 is not set
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77843=m
# CONFIG_EXTCON_MAX8997 is not set
CONFIG_EXTCON_PALMAS=m
CONFIG_EXTCON_PTN5150=m
# CONFIG_EXTCON_RT8973A is not set
CONFIG_EXTCON_SM5502=m
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_TUSB320=m
CONFIG_MEMORY=y
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
CONFIG_MADERA_IRQ=y
# CONFIG_XILINX_INTC is not set
# end of IRQ chip support
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
# CONFIG_SERIAL_IPOCTAL is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_INTEL_GW is not set
# CONFIG_RESET_TI_SYSCON is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_USB_LGM_PHY is not set
CONFIG_PHY_CAN_TRANSCEIVER=y
#
# PHY drivers for Broadcom platforms
#
CONFIG_BCM_KONA_USB2_PHY=m
# end of PHY drivers for Broadcom platforms
CONFIG_PHY_CADENCE_TORRENT=m
CONFIG_PHY_CADENCE_DPHY=m
# CONFIG_PHY_CADENCE_DPHY_RX is not set
CONFIG_PHY_CADENCE_SIERRA=y
CONFIG_PHY_CADENCE_SALVO=y
# CONFIG_PHY_PXA_28NM_HSIC is not set
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_LAN966X_SERDES is not set
# CONFIG_PHY_MAPPHONE_MDM6600 is not set
CONFIG_PHY_OCELOT_SERDES=m
CONFIG_PHY_INTEL_LGM_COMBO=y
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
CONFIG_MCB=m
CONFIG_MCB_PCI=m
CONFIG_MCB_LPC=m
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=m
# CONFIG_BTT is not set
CONFIG_OF_PMEM=m
CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_RAVE_SP_EEPROM is not set
CONFIG_NVMEM_RMEM=y
#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_PROTO_BASIC=y
CONFIG_STM_PROTO_SYS_T=m
CONFIG_STM_DUMMY=m
# CONFIG_STM_SOURCE_CONSOLE is not set
CONFIG_STM_SOURCE_HEARTBEAT=m
# CONFIG_STM_SOURCE_FTRACE is not set
CONFIG_INTEL_TH=y
CONFIG_INTEL_TH_PCI=m
# CONFIG_INTEL_TH_ACPI is not set
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
CONFIG_MULTIPLEXER=y
#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=m
CONFIG_MUX_GPIO=m
CONFIG_MUX_MMIO=y
# end of Multiplexer drivers
CONFIG_SIOX=y
# CONFIG_SIOX_BUS_GPIO is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
CONFIG_COUNTER=m
# CONFIG_104_QUAD_8 is not set
CONFIG_INTERRUPT_CNT=m
CONFIG_FTM_QUADDEC=m
CONFIG_MICROCHIP_TCB_CAPTURE=m
CONFIG_INTEL_QEP=m
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_CHECK=y
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_OCFS2_DEBUG_FS=y
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
CONFIG_BTRFS_FS_REF_VERIFY=y
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=y
# CONFIG_F2FS_STAT_FS is not set
CONFIG_F2FS_FS_XATTR=y
# CONFIG_F2FS_FS_POSIX_ACL is not set
CONFIG_F2FS_FS_SECURITY=y
CONFIG_F2FS_CHECK_FS=y
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_F2FS_FS_COMPRESSION=y
# CONFIG_F2FS_FS_LZO is not set
# CONFIG_F2FS_FS_LZ4 is not set
# CONFIG_F2FS_FS_ZSTD is not set
# CONFIG_F2FS_IOSTAT is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_AUTOFS_FS=m
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
CONFIG_OVERLAY_FS_INDEX=y
CONFIG_OVERLAY_FS_XINO_AUTO=y
CONFIG_OVERLAY_FS_METACOPY=y
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
CONFIG_FSCACHE_DEBUG=y
# CONFIG_CACHEFILES is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_TMPFS_INODE64 is not set
# CONFIG_HUGETLBFS is not set
CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=y
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
# CONFIG_UNICODE is not set
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_INFINIBAND is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_FORTIFY_SOURCE=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
# CONFIG_GCC_PLUGIN_STACKLEAK is not set
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# CONFIG_RANDSTRUCT_PERFORMANCE is not set
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_ENGINE=y
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
# CONFIG_CRYPTO_ECDSA is not set
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_SM2=m
# CONFIG_CRYPTO_CURVE25519 is not set
CONFIG_CRYPTO_CURVE25519_X86=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_AEGIS128_AESNI_SSE2=y
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_NHPOLY1305=y
CONFIG_CRYPTO_NHPOLY1305_SSE2=y
CONFIG_CRYPTO_NHPOLY1305_AVX2=y
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_ESSIV is not set
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_BLAKE2B=m
# CONFIG_CRYPTO_BLAKE2S is not set
CONFIG_CRYPTO_BLAKE2S_X86=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SM3=y
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_SM3_AVX_X86_64 is not set
CONFIG_CRYPTO_STREEBOG=y
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_BLOWFISH_X86_64=y
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=y
CONFIG_CRYPTO_CAST6=y
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_CHACHA20=y
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
CONFIG_CRYPTO_SM4=y
# CONFIG_CRYPTO_SM4_GENERIC is not set
CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64=m
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_842=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
CONFIG_CRYPTO_ZSTD=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_RNG_CAVP=y
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
CONFIG_CRYPTO_STATS=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
CONFIG_CRYPTO_DEV_ATMEL_I2C=y
CONFIG_CRYPTO_DEV_ATMEL_ECC=y
CONFIG_CRYPTO_DEV_ATMEL_SHA204A=m
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_QAT=y
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
CONFIG_CRYPTO_DEV_QAT_C3XXX=m
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
CONFIG_CRYPTO_DEV_QAT_4XXX=m
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=y
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
CONFIG_CRYPTO_DEV_NITROX=y
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=y
# CONFIG_CRYPTO_DEV_VIRTIO is not set
CONFIG_CRYPTO_DEV_SAFEXCEL=m
CONFIG_CRYPTO_DEV_CCREE=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=y
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
# CONFIG_RAID6_PQ_BENCHMARK is not set
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
CONFIG_LIB_MEMNEQ=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
# CONFIG_CRC4 is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
CONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not set
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_CMA is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACK_HASH_ORDER=20
CONFIG_SBITMAP=y
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=8192
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y
CONFIG_OBJTOOL=y
CONFIG_VMLINUX_MAP=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
# CONFIG_UBSAN_TRAP is not set
CONFIG_CC_HAS_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_ONLY_BOUNDS=y
CONFIG_UBSAN_SHIFT=y
# CONFIG_UBSAN_DIV_ZERO is not set
# CONFIG_UBSAN_BOOL is not set
# CONFIG_UBSAN_ENUM is not set
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_SANITIZE_ALL=y
# CONFIG_TEST_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_PAGE_OWNER=y
# CONFIG_PAGE_TABLE_CHECK is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
CONFIG_PTDUMP_DEBUGFS=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
# CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_HAVE_ARCH_KFENCE=y
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
CONFIG_DEBUG_TIMEKEEPING=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RAW_LOCK_NESTING is not set
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_LIST=y
CONFIG_TORTURE_TEST=m
CONFIG_RCU_SCALE_TEST=m
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_REF_SCALE_TEST is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_EQS_DEBUG=y
# CONFIG_RCU_STRICT_GRACE_PERIOD is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
#
# x86 Debugging
#
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAIL_PAGE_ALLOC is not set
CONFIG_FAULT_INJECTION_USERCOPY=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_KCOV=y
# CONFIG_KCOV_ENABLE_COMPARISONS is not set
CONFIG_KCOV_INSTRUMENT_ALL=y
CONFIG_KCOV_IRQ_AREA_SIZE=0x40000
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage
# end of Kernel hacking
[-- Attachment #3: job-script.ksh --]
[-- Type: text/plain, Size: 5031 bytes --]
#!/bin/sh
export_top_env()
{
export suite='boot'
export testcase='boot'
export category='functional'
export timeout='10m'
export job_origin='boot.yaml'
export queue_cmdline_keys=
export queue='int'
export testbox='vm-snb'
export tbox_group='vm-snb'
export branch='linux-review/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903'
export commit='03d56978dd246147e151916e4dc72af7bc24d5c9'
export kconfig='x86_64-randconfig-a002-20211206'
export nr_vm=160
export submit_id='62dd15e80b9a93b95c54b72c'
export job_file='/lkp/jobs/scheduled/vm-meta-162/boot-1-debian-11.1-x86_64-20220510.cgz-03d56978dd246147e151916e4dc72af7bc24d5c9-20220724-47452-y7oq44-5.yaml'
export id='900cf30846d3b9071dc00382863bc27896740db8'
export queuer_version='/lkp/xsang/.src-20220723-170131'
export model='qemu-system-x86_64 -enable-kvm -cpu SandyBridge'
export nr_cpu=2
export memory='16G'
export need_kconfig=\{\"KVM_GUEST\"\=\>\"y\"\}
export ssh_base_port=23032
export kernel_cmdline='vmalloc=256M initramfs_async=0 page_owner=on'
export rootfs='debian-11.1-x86_64-20220510.cgz'
export compiler='gcc-11'
export enqueue_time='2022-07-24 17:50:32 +0800'
export _id='62dd15e90b9a93b95c54b731'
export _rt='/result/boot/1/vm-snb/debian-11.1-x86_64-20220510.cgz/x86_64-randconfig-a002-20211206/gcc-11/03d56978dd246147e151916e4dc72af7bc24d5c9'
export user='lkp'
export LKP_SERVER='internal-lkp-server'
export result_root='/result/boot/1/vm-snb/debian-11.1-x86_64-20220510.cgz/x86_64-randconfig-a002-20211206/gcc-11/03d56978dd246147e151916e4dc72af7bc24d5c9/19'
export scheduler_version='/lkp/lkp/src'
export arch='x86_64'
export max_uptime=600
export initrd='/osimage/debian/debian-11.1-x86_64-20220510.cgz'
export bootloader_append='root=/dev/ram0
RESULT_ROOT=/result/boot/1/vm-snb/debian-11.1-x86_64-20220510.cgz/x86_64-randconfig-a002-20211206/gcc-11/03d56978dd246147e151916e4dc72af7bc24d5c9/19
BOOT_IMAGE=/pkg/linux/x86_64-randconfig-a002-20211206/gcc-11/03d56978dd246147e151916e4dc72af7bc24d5c9/vmlinuz-5.19.0-rc7-01443-g03d56978dd24
branch=linux-review/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
job=/lkp/jobs/scheduled/vm-meta-162/boot-1-debian-11.1-x86_64-20220510.cgz-03d56978dd246147e151916e4dc72af7bc24d5c9-20220724-47452-y7oq44-5.yaml
user=lkp
ARCH=x86_64
kconfig=x86_64-randconfig-a002-20211206
commit=03d56978dd246147e151916e4dc72af7bc24d5c9
vmalloc=256M initramfs_async=0 page_owner=on
max_uptime=600
LKP_SERVER=internal-lkp-server
selinux=0
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
export modules_initrd='/pkg/linux/x86_64-randconfig-a002-20211206/gcc-11/03d56978dd246147e151916e4dc72af7bc24d5c9/modules.cgz'
export bm_initrd='/osimage/deps/debian-11.1-x86_64-20220510.cgz/run-ipconfig_20220515.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/lkp_20220513.cgz,/osimage/deps/debian-11.1-x86_64-20220510.cgz/rsync-rootfs_20220515.cgz'
export lkp_initrd='/osimage/user/lkp/lkp-x86_64.cgz'
export site='inn'
export LKP_CGI_PORT=80
export LKP_CIFS_PORT=139
export schedule_notify_address=
export meta_host='vm-meta-162'
export kernel='/pkg/linux/x86_64-randconfig-a002-20211206/gcc-11/03d56978dd246147e151916e4dc72af7bc24d5c9/vmlinuz-5.19.0-rc7-01443-g03d56978dd24'
export dequeue_time='2022-07-24 17:51:25 +0800'
export job_initrd='/lkp/jobs/scheduled/vm-meta-162/boot-1-debian-11.1-x86_64-20220510.cgz-03d56978dd246147e151916e4dc72af7bc24d5c9-20220724-47452-y7oq44-5.cgz'
[ -n "$LKP_SRC" ] ||
export LKP_SRC=/lkp/${user:-lkp}/src
}
run_job()
{
echo $$ > $TMP/run-job.pid
. $LKP_SRC/lib/http.sh
. $LKP_SRC/lib/job.sh
. $LKP_SRC/lib/env.sh
export_top_env
run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-slabinfo
run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-meminfo
run_monitor $LKP_SRC/monitors/one-shot/wrapper memmap
run_monitor $LKP_SRC/monitors/no-stdout/wrapper boot-time
run_monitor $LKP_SRC/monitors/wrapper kmsg
run_monitor $LKP_SRC/monitors/wrapper heartbeat
run_monitor $LKP_SRC/monitors/wrapper meminfo
run_monitor $LKP_SRC/monitors/wrapper oom-killer
run_monitor $LKP_SRC/monitors/plain/watchdog
run_test $LKP_SRC/tests/wrapper sleep 1
}
extract_stats()
{
export stats_part_begin=
export stats_part_end=
$LKP_SRC/stats/wrapper boot-slabinfo
$LKP_SRC/stats/wrapper boot-meminfo
$LKP_SRC/stats/wrapper memmap
$LKP_SRC/stats/wrapper boot-memory
$LKP_SRC/stats/wrapper boot-time
$LKP_SRC/stats/wrapper kernel-size
$LKP_SRC/stats/wrapper kmsg
$LKP_SRC/stats/wrapper sleep
$LKP_SRC/stats/wrapper meminfo
$LKP_SRC/stats/wrapper time sleep.time
$LKP_SRC/stats/wrapper dmesg
$LKP_SRC/stats/wrapper kmsg
$LKP_SRC/stats/wrapper last_state
$LKP_SRC/stats/wrapper stderr
$LKP_SRC/stats/wrapper time
}
"$@"
[-- Attachment #4: dmesg.xz --]
[-- Type: application/x-xz, Size: 16944 bytes --]
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [net] 03d56978dd: BUG:Bad_page_map_in_process
2022-07-25 16:58 ` kernel test robot
(?)
@ 2022-07-27 23:41 ` Joanne Koong
-1 siblings, 0 replies; 21+ messages in thread
From: Joanne Koong @ 2022-07-27 23:41 UTC (permalink / raw)
To: kernel test robot
Cc: 0day robot, LKML, netdev, dccp, lkp, Paolo Abeni, Eric Dumazet,
Jakub Kicinski, Martin KaFai Lau, David Miller
On Sun, Jul 24, 2022 at 7:05 AM kernel test robot <oliver.sang@intel.com> wrote:
>
>
>
> Greeting,
>
> FYI, we noticed the following commit (built with gcc-11):
>
> commit: 03d56978dd246147e151916e4dc72af7bc24d5c9 ("[PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address")
> url: https://github.com/intel-lab-lkp/linux/commits/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
> base: https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git 949d6b405e6160ae44baea39192d67b39cb7eeac
> patch link: https://lore.kernel.org/netdev/20220722195406.1304948-2-joannelkoong@gmail.com
>
> in testcase: boot
>
> on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
>
> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
>
>
>
> If you fix the issue, kindly add following tag
> Reported-by: kernel test robot <oliver.sang@intel.com>
>
>
> [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
> [ 103.873143][ T486] addr:00007f9fe52a2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f928adcb58 index:1a1
> [ 103.875128][ T486] file:libcrypto.so.1.1 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> [ 103.877339][ T486] CPU: 0 PID: 486 Comm: rsync Not tainted 5.19.0-rc7-01443-g03d56978dd24 #1
> [ 103.879032][ T486] Call Trace:
> [ 103.879742][ T486] <TASK>
> [ 103.880329][ T486] ? simple_write_end+0x140/0x140
> [ 103.881338][ T486] dump_stack_lvl+0x3b/0x53
> [ 103.882274][ T486] ? __filemap_get_folio+0x780/0x780
> [ 103.883270][ T486] print_bad_pte.cold+0x15b/0x1c5
> [ 103.884202][ T486] vm_normal_page+0x65/0x140
> [ 103.885062][ T486] zap_pte_range+0x23b/0x9c0
> [ 103.885897][ T486] unmap_page_range+0x263/0x5c0
> [ 103.886846][ T486] unmap_vmas+0x121/0x200
> [ 103.887628][ T486] exit_mmap+0xb5/0x240
> [ 103.888401][ T486] mmput+0x3b/0x140
> [ 103.889134][ T486] exit_mm+0xff/0x180
> [ 103.889877][ T486] do_exit+0x100/0x400
> [ 103.890661][ T486] do_group_exit+0x3e/0x100
> [ 103.891514][ T486] __x64_sys_exit_group+0x18/0x40
> [ 103.892494][ T486] do_syscall_64+0x5d/0x80
> [ 103.893294][ T486] ? do_user_addr_fault+0x257/0x6c0
> [ 103.894238][ T486] ? lock_release+0x6e/0x100
> [ 103.895171][ T486] ? up_read+0x12/0x40
> [ 103.896036][ T486] ? exc_page_fault+0xb2/0x2c0
> [ 103.897021][ T486] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> [ 103.898243][ T486] RIP: 0033:0x7f9fe5007699
> [ 103.899149][ T486] Code: Unable to access opcode bytes at RIP 0x7f9fe500766f.
> [ 103.900511][ T486] RSP: 002b:00007fff7e32c3a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> [ 103.902027][ T486] RAX: ffffffffffffffda RBX: 00007f9fe50fc610 RCX: 00007f9fe5007699
> [ 103.903477][ T486] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> [ 103.904943][ T486] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> [ 103.906384][ T486] R10: 000000000000000b R11: 0000000000000246 R12: 00007f9fe50fc610
> [ 103.907823][ T486] R13: 0000000000000001 R14: 00007f9fe50fcae8 R15: 0000000000000000
> [ 103.909290][ T486] </TASK>
> [ 103.910423][ T486] Disabling lock debugging due to kernel taint
> [ 107.503093][ T508] BUG: Bad page map in process rsync pte:ffff92f93b7fe508 pmd:13aa1c067
> [ 107.504948][ T508] addr:00007fced9aa2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f92891ab58 index:9a
> [ 107.507070][ T508] file:libzstd.so.1.4.8 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> [ 107.508825][ T508] CPU: 0 PID: 508 Comm: rsync Tainted: G B 5.19.0-rc7-01443-g03d56978dd24 #1
> [ 107.510762][ T508] Call Trace:
> [ 107.511458][ T508] <TASK>
> [ 107.512058][ T508] ? simple_write_end+0x140/0x140
> [ 107.513072][ T508] dump_stack_lvl+0x3b/0x53
> [ 107.513990][ T508] ? __filemap_get_folio+0x780/0x780
> [ 107.519166][ T508] print_bad_pte.cold+0x15b/0x1c5
> [ 107.520032][ T508] vm_normal_page+0x65/0x140
> [ 107.520802][ T508] zap_pte_range+0x23b/0x9c0
> [ 107.521548][ T508] unmap_page_range+0x263/0x5c0
> [ 107.522355][ T508] unmap_vmas+0x121/0x200
> [ 107.523247][ T508] exit_mmap+0xb5/0x240
> [ 107.524107][ T508] mmput+0x3b/0x140
> [ 107.524908][ T508] exit_mm+0xff/0x180
> [ 107.525716][ T508] do_exit+0x100/0x400
> [ 107.526613][ T508] do_group_exit+0x3e/0x100
> [ 107.527541][ T508] __x64_sys_exit_group+0x18/0x40
> [ 107.528450][ T508] do_syscall_64+0x5d/0x80
> [ 107.529368][ T508] ? up_read+0x12/0x40
> [ 107.530228][ T508] ? do_user_addr_fault+0x257/0x6c0
> [ 107.531121][ T508] ? rcu_read_lock_sched_held+0x5/0x40
> [ 107.532046][ T508] ? exc_page_fault+0xb2/0x2c0
> [ 107.532843][ T508] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> [ 107.533866][ T508] RIP: 0033:0x7fced95ff699
> [ 107.534781][ T508] Code: Unable to access opcode bytes at RIP 0x7fced95ff66f.
> [ 107.536225][ T508] RSP: 002b:00007fff162474c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> [ 107.537871][ T508] RAX: ffffffffffffffda RBX: 00007fced96f4610 RCX: 00007fced95ff699
> [ 107.539506][ T508] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> [ 107.541126][ T508] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> [ 107.542743][ T508] R10: 000000000000000b R11: 0000000000000246 R12: 00007fced96f4610
> [ 107.544310][ T508] R13: 0000000000000001 R14: 00007fced96f4ae8 R15: 0000000000000000
> [ 107.545881][ T508] </TASK>
>
>
>
> To reproduce:
>
> # build kernel
> cd linux
> cp config-5.19.0-rc7-01443-g03d56978dd24 .config
> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> cd <mod-install-dir>
> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
>
>
> git clone https://github.com/intel/lkp-tests.git
> cd lkp-tests
> bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
>
> # if come across any failure that blocks the test,
> # please remove ~/.lkp and /lkp dir to run from a clean state.
>
I ran this in a loop ~20 times but I'm not able to repro the crash.
This is a snippet of what I see (and I can also attach or paste the
entire log if that would be helpful):
[ OK ] Created slice system-getty.slice.
[ OK ] Created slice system-modprobe.slice.
[ OK ] Created slice User and Session Slice.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[UNSUPP] Starting of Arbitrary Exec…Automount Point not supported.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Paths.
[ OK ] Reached target Slices.
[ OK ] Reached target Swap.
[ OK ] Listening on RPCbind Server Activation Socket.
[ OK ] Listening on Syslog Socket.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on udev Kernel Socket.
Mounting RPC Pipe File System...
Mounting Kernel Debug File System...
Mounting Kernel Trace File System...
Starting Load Kernel Module configfs...
Starting Load Kernel Module drm...
Starting Load Kernel Module fuse...
Starting Journal Service...
Starting Load Kernel Modules...
Starting Remount Root and Kernel File Systems...
Starting Coldplug All udev Devices...
[FAILED] Failed to mount RPC Pipe File System.
See 'systemctl status run-rpc_pipefs.mount' for details.
[DEPEND] Dependency failed for RPC …curity service for NFS server.
[DEPEND] Dependency failed for RPC …ice for NFS client and server.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Trace File System.
[ OK ] Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Remount Root and Kernel File Systems.
[ OK ] Reached target NFS client services.
Mounting Kernel Configuration File System...
Starting Load/Save Random Seed...
Starting Apply Kernel Variables...
Starting Create System Users...
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Load/Save Random Seed.
[FAILED] Failed to start Apply Kernel Variables.
See 'systemctl status systemd-sysctl.service' for details.
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Preprocess NFS configuration...
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Finished Preprocess NFS configuration.
[ OK ] Started Journal Service.
Starting Flush Journal to Persistent Storage...
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Finished Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Finished Create Volatile Files and Directories.
Starting RPC bind portmap service...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started RPC bind portmap service.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
[ OK ] Reached target RPC Port Mapper.
[FAILED] Failed to start Update UTMP about System Boot/Shutdown.
See 'systemctl status systemd-update-utmp.service' for details.
[DEPEND] Dependency failed for Upda…about System Runlevel Changes.
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Daily rotation of log files.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started Regular background program processing daemon.
[ OK ] Started D-Bus System Message Bus.
Starting Remove Stale Onli…t4 Metadata Check Snapshots...
Starting Helper to synchronize boot up for ifupdown...
Starting LSB: Execute the …-e command to reboot system...
Starting LSB: OpenIPMI Driver init script...
Starting System Logging Service...
Starting User Login Management...
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[ OK ] Started System Logging Service.
[ OK ] Finished Helper to synchronize boot up for ifupdown.
[ 15.478773][ T244] systemctl (244) used greatest stack depth:
12824 bytes left
[ OK ] Started LSB: Execute the k…c -e command to reboot system.
Starting LSB: Load kernel image with kexec...
Starting Raise network interfaces...
[FAILED] Failed to start LSB: OpenIPMI Driver init script.
See 'systemctl status openipmi.service' for details.
[ OK ] Started LSB: Load kernel image with kexec.
[ OK ] Started User Login Management.
[ OK ] Finished Raise network interfaces.
[ OK ] Reached target Network.
Starting LKP bootstrap...
Starting /etc/rc.local Compatibility...
Starting OpenBSD Secure Shell server...
[ 15.720065] rc.local[294]: mkdir: cannot create directory
‘/var/lock/lkp-bootstrap.lock’: File exists
Starting Permit User Sessions...
[ OK ] Started LKP bootstrap.
[ OK ] Finished Permit User Sessions.
[ OK ] Started OpenBSD Secure Shell server.
LKP: ttyS0: 298: Kernel tests: Boot OK!
LKP: ttyS0: 298: HOSTNAME vm-snb, MAC 52:54:00:12:34:56, kernel
5.19.0-rc7-01445-ga151972cddb3 901
LKP: ttyS0: 298: /lkp/lkp/src/bin/run-lkp
/lkp/jobs/scheduled/vm-meta-162/boot-1-debian-11.1-x86_64-20220510.cgz-03d56978dd246147e151916e4dc72af7bc24d5c9-20220724-47452-y7oq44-5.yaml
LKP: ttyS0: 298: LKP: rebooting forcely
[ 24.038119][ T298] sysrq: Emergency Sync
[ 24.038784][ T25] Emergency Sync complete
[ 24.039170][ T298] sysrq: Resetting
I examined more closely the changes between v2 and v3 and I don't see
anything that would lead to this error either (I'm assuming v2 is
okay because this report wasn't generated for it). Looking at the
stack trace too, I'm not seeing anything that sticks out (eg this
looks like a memory mapping failure and bhash2 didn't modify mapping
or paging code).
I don't think this bug report is related to the bhash2 changes. But
please let me know if you disagree.
Thanks,
Joanne
>
>
> --
> 0-DAY CI Kernel Test Service
> https://01.org/lkp
>
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [net] 03d56978dd: BUG:Bad_page_map_in_process
@ 2022-07-27 23:41 ` Joanne Koong
0 siblings, 0 replies; 21+ messages in thread
From: Joanne Koong @ 2022-07-27 23:41 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 13423 bytes --]
On Sun, Jul 24, 2022 at 7:05 AM kernel test robot <oliver.sang@intel.com> wrote:
>
>
>
> Greeting,
>
> FYI, we noticed the following commit (built with gcc-11):
>
> commit: 03d56978dd246147e151916e4dc72af7bc24d5c9 ("[PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address")
> url: https://github.com/intel-lab-lkp/linux/commits/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
> base: https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git 949d6b405e6160ae44baea39192d67b39cb7eeac
> patch link: https://lore.kernel.org/netdev/20220722195406.1304948-2-joannelkoong(a)gmail.com
>
> in testcase: boot
>
> on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
>
> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
>
>
>
> If you fix the issue, kindly add following tag
> Reported-by: kernel test robot <oliver.sang@intel.com>
>
>
> [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
> [ 103.873143][ T486] addr:00007f9fe52a2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f928adcb58 index:1a1
> [ 103.875128][ T486] file:libcrypto.so.1.1 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> [ 103.877339][ T486] CPU: 0 PID: 486 Comm: rsync Not tainted 5.19.0-rc7-01443-g03d56978dd24 #1
> [ 103.879032][ T486] Call Trace:
> [ 103.879742][ T486] <TASK>
> [ 103.880329][ T486] ? simple_write_end+0x140/0x140
> [ 103.881338][ T486] dump_stack_lvl+0x3b/0x53
> [ 103.882274][ T486] ? __filemap_get_folio+0x780/0x780
> [ 103.883270][ T486] print_bad_pte.cold+0x15b/0x1c5
> [ 103.884202][ T486] vm_normal_page+0x65/0x140
> [ 103.885062][ T486] zap_pte_range+0x23b/0x9c0
> [ 103.885897][ T486] unmap_page_range+0x263/0x5c0
> [ 103.886846][ T486] unmap_vmas+0x121/0x200
> [ 103.887628][ T486] exit_mmap+0xb5/0x240
> [ 103.888401][ T486] mmput+0x3b/0x140
> [ 103.889134][ T486] exit_mm+0xff/0x180
> [ 103.889877][ T486] do_exit+0x100/0x400
> [ 103.890661][ T486] do_group_exit+0x3e/0x100
> [ 103.891514][ T486] __x64_sys_exit_group+0x18/0x40
> [ 103.892494][ T486] do_syscall_64+0x5d/0x80
> [ 103.893294][ T486] ? do_user_addr_fault+0x257/0x6c0
> [ 103.894238][ T486] ? lock_release+0x6e/0x100
> [ 103.895171][ T486] ? up_read+0x12/0x40
> [ 103.896036][ T486] ? exc_page_fault+0xb2/0x2c0
> [ 103.897021][ T486] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> [ 103.898243][ T486] RIP: 0033:0x7f9fe5007699
> [ 103.899149][ T486] Code: Unable to access opcode bytes at RIP 0x7f9fe500766f.
> [ 103.900511][ T486] RSP: 002b:00007fff7e32c3a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> [ 103.902027][ T486] RAX: ffffffffffffffda RBX: 00007f9fe50fc610 RCX: 00007f9fe5007699
> [ 103.903477][ T486] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> [ 103.904943][ T486] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> [ 103.906384][ T486] R10: 000000000000000b R11: 0000000000000246 R12: 00007f9fe50fc610
> [ 103.907823][ T486] R13: 0000000000000001 R14: 00007f9fe50fcae8 R15: 0000000000000000
> [ 103.909290][ T486] </TASK>
> [ 103.910423][ T486] Disabling lock debugging due to kernel taint
> [ 107.503093][ T508] BUG: Bad page map in process rsync pte:ffff92f93b7fe508 pmd:13aa1c067
> [ 107.504948][ T508] addr:00007fced9aa2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f92891ab58 index:9a
> [ 107.507070][ T508] file:libzstd.so.1.4.8 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> [ 107.508825][ T508] CPU: 0 PID: 508 Comm: rsync Tainted: G B 5.19.0-rc7-01443-g03d56978dd24 #1
> [ 107.510762][ T508] Call Trace:
> [ 107.511458][ T508] <TASK>
> [ 107.512058][ T508] ? simple_write_end+0x140/0x140
> [ 107.513072][ T508] dump_stack_lvl+0x3b/0x53
> [ 107.513990][ T508] ? __filemap_get_folio+0x780/0x780
> [ 107.519166][ T508] print_bad_pte.cold+0x15b/0x1c5
> [ 107.520032][ T508] vm_normal_page+0x65/0x140
> [ 107.520802][ T508] zap_pte_range+0x23b/0x9c0
> [ 107.521548][ T508] unmap_page_range+0x263/0x5c0
> [ 107.522355][ T508] unmap_vmas+0x121/0x200
> [ 107.523247][ T508] exit_mmap+0xb5/0x240
> [ 107.524107][ T508] mmput+0x3b/0x140
> [ 107.524908][ T508] exit_mm+0xff/0x180
> [ 107.525716][ T508] do_exit+0x100/0x400
> [ 107.526613][ T508] do_group_exit+0x3e/0x100
> [ 107.527541][ T508] __x64_sys_exit_group+0x18/0x40
> [ 107.528450][ T508] do_syscall_64+0x5d/0x80
> [ 107.529368][ T508] ? up_read+0x12/0x40
> [ 107.530228][ T508] ? do_user_addr_fault+0x257/0x6c0
> [ 107.531121][ T508] ? rcu_read_lock_sched_held+0x5/0x40
> [ 107.532046][ T508] ? exc_page_fault+0xb2/0x2c0
> [ 107.532843][ T508] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> [ 107.533866][ T508] RIP: 0033:0x7fced95ff699
> [ 107.534781][ T508] Code: Unable to access opcode bytes at RIP 0x7fced95ff66f.
> [ 107.536225][ T508] RSP: 002b:00007fff162474c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> [ 107.537871][ T508] RAX: ffffffffffffffda RBX: 00007fced96f4610 RCX: 00007fced95ff699
> [ 107.539506][ T508] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> [ 107.541126][ T508] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> [ 107.542743][ T508] R10: 000000000000000b R11: 0000000000000246 R12: 00007fced96f4610
> [ 107.544310][ T508] R13: 0000000000000001 R14: 00007fced96f4ae8 R15: 0000000000000000
> [ 107.545881][ T508] </TASK>
>
>
>
> To reproduce:
>
> # build kernel
> cd linux
> cp config-5.19.0-rc7-01443-g03d56978dd24 .config
> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> cd <mod-install-dir>
> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
>
>
> git clone https://github.com/intel/lkp-tests.git
> cd lkp-tests
> bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
>
> # if come across any failure that blocks the test,
> # please remove ~/.lkp and /lkp dir to run from a clean state.
>
I ran this in a loop ~20 times but I'm not able to repro the crash.
This is a snippet of what I see (and I can also attach or paste the
entire log if that would be helpful):
[ OK ] Created slice system-getty.slice.
[ OK ] Created slice system-modprobe.slice.
[ OK ] Created slice User and Session Slice.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[UNSUPP] Starting of Arbitrary Exec…Automount Point not supported.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Paths.
[ OK ] Reached target Slices.
[ OK ] Reached target Swap.
[ OK ] Listening on RPCbind Server Activation Socket.
[ OK ] Listening on Syslog Socket.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on udev Kernel Socket.
Mounting RPC Pipe File System...
Mounting Kernel Debug File System...
Mounting Kernel Trace File System...
Starting Load Kernel Module configfs...
Starting Load Kernel Module drm...
Starting Load Kernel Module fuse...
Starting Journal Service...
Starting Load Kernel Modules...
Starting Remount Root and Kernel File Systems...
Starting Coldplug All udev Devices...
[FAILED] Failed to mount RPC Pipe File System.
See 'systemctl status run-rpc_pipefs.mount' for details.
[DEPEND] Dependency failed for RPC …curity service for NFS server.
[DEPEND] Dependency failed for RPC …ice for NFS client and server.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Trace File System.
[ OK ] Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Remount Root and Kernel File Systems.
[ OK ] Reached target NFS client services.
Mounting Kernel Configuration File System...
Starting Load/Save Random Seed...
Starting Apply Kernel Variables...
Starting Create System Users...
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Load/Save Random Seed.
[FAILED] Failed to start Apply Kernel Variables.
See 'systemctl status systemd-sysctl.service' for details.
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Preprocess NFS configuration...
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Finished Preprocess NFS configuration.
[ OK ] Started Journal Service.
Starting Flush Journal to Persistent Storage...
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Finished Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Finished Create Volatile Files and Directories.
Starting RPC bind portmap service...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started RPC bind portmap service.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
[ OK ] Reached target RPC Port Mapper.
[FAILED] Failed to start Update UTMP about System Boot/Shutdown.
See 'systemctl status systemd-update-utmp.service' for details.
[DEPEND] Dependency failed for Upda…about System Runlevel Changes.
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Daily rotation of log files.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started Regular background program processing daemon.
[ OK ] Started D-Bus System Message Bus.
Starting Remove Stale Onli…t4 Metadata Check Snapshots...
Starting Helper to synchronize boot up for ifupdown...
Starting LSB: Execute the …-e command to reboot system...
Starting LSB: OpenIPMI Driver init script...
Starting System Logging Service...
Starting User Login Management...
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[ OK ] Started System Logging Service.
[ OK ] Finished Helper to synchronize boot up for ifupdown.
[ 15.478773][ T244] systemctl (244) used greatest stack depth:
12824 bytes left
[ OK ] Started LSB: Execute the k…c -e command to reboot system.
Starting LSB: Load kernel image with kexec...
Starting Raise network interfaces...
[FAILED] Failed to start LSB: OpenIPMI Driver init script.
See 'systemctl status openipmi.service' for details.
[ OK ] Started LSB: Load kernel image with kexec.
[ OK ] Started User Login Management.
[ OK ] Finished Raise network interfaces.
[ OK ] Reached target Network.
Starting LKP bootstrap...
Starting /etc/rc.local Compatibility...
Starting OpenBSD Secure Shell server...
[ 15.720065] rc.local[294]: mkdir: cannot create directory
‘/var/lock/lkp-bootstrap.lock’: File exists
Starting Permit User Sessions...
[ OK ] Started LKP bootstrap.
[ OK ] Finished Permit User Sessions.
[ OK ] Started OpenBSD Secure Shell server.
LKP: ttyS0: 298: Kernel tests: Boot OK!
LKP: ttyS0: 298: HOSTNAME vm-snb, MAC 52:54:00:12:34:56, kernel
5.19.0-rc7-01445-ga151972cddb3 901
LKP: ttyS0: 298: /lkp/lkp/src/bin/run-lkp
/lkp/jobs/scheduled/vm-meta-162/boot-1-debian-11.1-x86_64-20220510.cgz-03d56978dd246147e151916e4dc72af7bc24d5c9-20220724-47452-y7oq44-5.yaml
LKP: ttyS0: 298: LKP: rebooting forcely
[ 24.038119][ T298] sysrq: Emergency Sync
[ 24.038784][ T25] Emergency Sync complete
[ 24.039170][ T298] sysrq: Resetting
I examined more closely the changes between v2 and v3 and I don't see
anything that would lead to this error either (I'm assuming v2 is
okay because this report wasn't generated for it). Looking at the
stack trace too, I'm not seeing anything that sticks out (eg this
looks like a memory mapping failure and bhash2 didn't modify mapping
or paging code).
I don't think this bug report is related to the bhash2 changes. But
please let me know if you disagree.
Thanks,
Joanne
>
>
> --
> 0-DAY CI Kernel Test Service
> https://01.org/lkp
>
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [net] 03d56978dd: BUG:Bad_page_map_in_process
@ 2022-07-27 23:41 ` Joanne Koong
0 siblings, 0 replies; 21+ messages in thread
From: Joanne Koong @ 2022-07-27 23:41 UTC (permalink / raw)
To: dccp
On Sun, Jul 24, 2022 at 7:05 AM kernel test robot <oliver.sang@intel.com> wrote:
>
>
>
> Greeting,
>
> FYI, we noticed the following commit (built with gcc-11):
>
> commit: 03d56978dd246147e151916e4dc72af7bc24d5c9 ("[PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address")
> url: https://github.com/intel-lab-lkp/linux/commits/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
> base: https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git 949d6b405e6160ae44baea39192d67b39cb7eeac
> patch link: https://lore.kernel.org/netdev/20220722195406.1304948-2-joannelkoong@gmail.com
>
> in testcase: boot
>
> on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
>
> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
>
>
>
> If you fix the issue, kindly add following tag
> Reported-by: kernel test robot <oliver.sang@intel.com>
>
>
> [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
> [ 103.873143][ T486] addr:00007f9fe52a2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f928adcb58 index:1a1
> [ 103.875128][ T486] file:libcrypto.so.1.1 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> [ 103.877339][ T486] CPU: 0 PID: 486 Comm: rsync Not tainted 5.19.0-rc7-01443-g03d56978dd24 #1
> [ 103.879032][ T486] Call Trace:
> [ 103.879742][ T486] <TASK>
> [ 103.880329][ T486] ? simple_write_end+0x140/0x140
> [ 103.881338][ T486] dump_stack_lvl+0x3b/0x53
> [ 103.882274][ T486] ? __filemap_get_folio+0x780/0x780
> [ 103.883270][ T486] print_bad_pte.cold+0x15b/0x1c5
> [ 103.884202][ T486] vm_normal_page+0x65/0x140
> [ 103.885062][ T486] zap_pte_range+0x23b/0x9c0
> [ 103.885897][ T486] unmap_page_range+0x263/0x5c0
> [ 103.886846][ T486] unmap_vmas+0x121/0x200
> [ 103.887628][ T486] exit_mmap+0xb5/0x240
> [ 103.888401][ T486] mmput+0x3b/0x140
> [ 103.889134][ T486] exit_mm+0xff/0x180
> [ 103.889877][ T486] do_exit+0x100/0x400
> [ 103.890661][ T486] do_group_exit+0x3e/0x100
> [ 103.891514][ T486] __x64_sys_exit_group+0x18/0x40
> [ 103.892494][ T486] do_syscall_64+0x5d/0x80
> [ 103.893294][ T486] ? do_user_addr_fault+0x257/0x6c0
> [ 103.894238][ T486] ? lock_release+0x6e/0x100
> [ 103.895171][ T486] ? up_read+0x12/0x40
> [ 103.896036][ T486] ? exc_page_fault+0xb2/0x2c0
> [ 103.897021][ T486] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> [ 103.898243][ T486] RIP: 0033:0x7f9fe5007699
> [ 103.899149][ T486] Code: Unable to access opcode bytes at RIP 0x7f9fe500766f.
> [ 103.900511][ T486] RSP: 002b:00007fff7e32c3a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> [ 103.902027][ T486] RAX: ffffffffffffffda RBX: 00007f9fe50fc610 RCX: 00007f9fe5007699
> [ 103.903477][ T486] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> [ 103.904943][ T486] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> [ 103.906384][ T486] R10: 000000000000000b R11: 0000000000000246 R12: 00007f9fe50fc610
> [ 103.907823][ T486] R13: 0000000000000001 R14: 00007f9fe50fcae8 R15: 0000000000000000
> [ 103.909290][ T486] </TASK>
> [ 103.910423][ T486] Disabling lock debugging due to kernel taint
> [ 107.503093][ T508] BUG: Bad page map in process rsync pte:ffff92f93b7fe508 pmd:13aa1c067
> [ 107.504948][ T508] addr:00007fced9aa2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f92891ab58 index:9a
> [ 107.507070][ T508] file:libzstd.so.1.4.8 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> [ 107.508825][ T508] CPU: 0 PID: 508 Comm: rsync Tainted: G B 5.19.0-rc7-01443-g03d56978dd24 #1
> [ 107.510762][ T508] Call Trace:
> [ 107.511458][ T508] <TASK>
> [ 107.512058][ T508] ? simple_write_end+0x140/0x140
> [ 107.513072][ T508] dump_stack_lvl+0x3b/0x53
> [ 107.513990][ T508] ? __filemap_get_folio+0x780/0x780
> [ 107.519166][ T508] print_bad_pte.cold+0x15b/0x1c5
> [ 107.520032][ T508] vm_normal_page+0x65/0x140
> [ 107.520802][ T508] zap_pte_range+0x23b/0x9c0
> [ 107.521548][ T508] unmap_page_range+0x263/0x5c0
> [ 107.522355][ T508] unmap_vmas+0x121/0x200
> [ 107.523247][ T508] exit_mmap+0xb5/0x240
> [ 107.524107][ T508] mmput+0x3b/0x140
> [ 107.524908][ T508] exit_mm+0xff/0x180
> [ 107.525716][ T508] do_exit+0x100/0x400
> [ 107.526613][ T508] do_group_exit+0x3e/0x100
> [ 107.527541][ T508] __x64_sys_exit_group+0x18/0x40
> [ 107.528450][ T508] do_syscall_64+0x5d/0x80
> [ 107.529368][ T508] ? up_read+0x12/0x40
> [ 107.530228][ T508] ? do_user_addr_fault+0x257/0x6c0
> [ 107.531121][ T508] ? rcu_read_lock_sched_held+0x5/0x40
> [ 107.532046][ T508] ? exc_page_fault+0xb2/0x2c0
> [ 107.532843][ T508] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> [ 107.533866][ T508] RIP: 0033:0x7fced95ff699
> [ 107.534781][ T508] Code: Unable to access opcode bytes at RIP 0x7fced95ff66f.
> [ 107.536225][ T508] RSP: 002b:00007fff162474c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> [ 107.537871][ T508] RAX: ffffffffffffffda RBX: 00007fced96f4610 RCX: 00007fced95ff699
> [ 107.539506][ T508] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> [ 107.541126][ T508] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> [ 107.542743][ T508] R10: 000000000000000b R11: 0000000000000246 R12: 00007fced96f4610
> [ 107.544310][ T508] R13: 0000000000000001 R14: 00007fced96f4ae8 R15: 0000000000000000
> [ 107.545881][ T508] </TASK>
>
>
>
> To reproduce:
>
> # build kernel
> cd linux
> cp config-5.19.0-rc7-01443-g03d56978dd24 .config
> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> cd <mod-install-dir>
> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
>
>
> git clone https://github.com/intel/lkp-tests.git
> cd lkp-tests
> bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
>
> # if come across any failure that blocks the test,
> # please remove ~/.lkp and /lkp dir to run from a clean state.
>
I ran this in a loop ~20 times but I'm not able to repro the crash.
This is a snippet of what I see (and I can also attach or paste the
entire log if that would be helpful):
[ OK ] Created slice system-getty.slice.
[ OK ] Created slice system-modprobe.slice.
[ OK ] Created slice User and Session Slice.
[ OK ] Started Dispatch Password …ts to Console Directory Watch.
[ OK ] Started Forward Password R…uests to Wall Directory Watch.
[UNSUPP] Starting of Arbitrary Exec…Automount Point not supported.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Paths.
[ OK ] Reached target Slices.
[ OK ] Reached target Swap.
[ OK ] Listening on RPCbind Server Activation Socket.
[ OK ] Listening on Syslog Socket.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on udev Kernel Socket.
Mounting RPC Pipe File System...
Mounting Kernel Debug File System...
Mounting Kernel Trace File System...
Starting Load Kernel Module configfs...
Starting Load Kernel Module drm...
Starting Load Kernel Module fuse...
Starting Journal Service...
Starting Load Kernel Modules...
Starting Remount Root and Kernel File Systems...
Starting Coldplug All udev Devices...
[FAILED] Failed to mount RPC Pipe File System.
See 'systemctl status run-rpc_pipefs.mount' for details.
[DEPEND] Dependency failed for RPC …curity service for NFS server.
[DEPEND] Dependency failed for RPC …ice for NFS client and server.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Trace File System.
[ OK ] Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Remount Root and Kernel File Systems.
[ OK ] Reached target NFS client services.
Mounting Kernel Configuration File System...
Starting Load/Save Random Seed...
Starting Apply Kernel Variables...
Starting Create System Users...
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Load/Save Random Seed.
[FAILED] Failed to start Apply Kernel Variables.
See 'systemctl status systemd-sysctl.service' for details.
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Preprocess NFS configuration...
Starting Rule-based Manage…for Device Events and Files...
[ OK ] Finished Preprocess NFS configuration.
[ OK ] Started Journal Service.
Starting Flush Journal to Persistent Storage...
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Finished Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Finished Create Volatile Files and Directories.
Starting RPC bind portmap service...
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started RPC bind portmap service.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
[ OK ] Reached target RPC Port Mapper.
[FAILED] Failed to start Update UTMP about System Boot/Shutdown.
See 'systemctl status systemd-update-utmp.service' for details.
[DEPEND] Dependency failed for Upda…about System Runlevel Changes.
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily apt download activities.
[ OK ] Started Daily apt upgrade and clean activities.
[ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[ OK ] Started Discard unused blocks once a week.
[ OK ] Started Daily rotation of log files.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started Regular background program processing daemon.
[ OK ] Started D-Bus System Message Bus.
Starting Remove Stale Onli…t4 Metadata Check Snapshots...
Starting Helper to synchronize boot up for ifupdown...
Starting LSB: Execute the …-e command to reboot system...
Starting LSB: OpenIPMI Driver init script...
Starting System Logging Service...
Starting User Login Management...
[ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[ OK ] Started System Logging Service.
[ OK ] Finished Helper to synchronize boot up for ifupdown.
[ 15.478773][ T244] systemctl (244) used greatest stack depth:
12824 bytes left
[ OK ] Started LSB: Execute the k…c -e command to reboot system.
Starting LSB: Load kernel image with kexec...
Starting Raise network interfaces...
[FAILED] Failed to start LSB: OpenIPMI Driver init script.
See 'systemctl status openipmi.service' for details.
[ OK ] Started LSB: Load kernel image with kexec.
[ OK ] Started User Login Management.
[ OK ] Finished Raise network interfaces.
[ OK ] Reached target Network.
Starting LKP bootstrap...
Starting /etc/rc.local Compatibility...
Starting OpenBSD Secure Shell server...
[ 15.720065] rc.local[294]: mkdir: cannot create directory
‘/var/lock/lkp-bootstrap.lock’: File exists
Starting Permit User Sessions...
[ OK ] Started LKP bootstrap.
[ OK ] Finished Permit User Sessions.
[ OK ] Started OpenBSD Secure Shell server.
LKP: ttyS0: 298: Kernel tests: Boot OK!
LKP: ttyS0: 298: HOSTNAME vm-snb, MAC 52:54:00:12:34:56, kernel
5.19.0-rc7-01445-ga151972cddb3 901
LKP: ttyS0: 298: /lkp/lkp/src/bin/run-lkp
/lkp/jobs/scheduled/vm-meta-162/boot-1-debian-11.1-x86_64-20220510.cgz-03d56978dd246147e151916e4dc72af7bc24d5c9-20220724-47452-y7oq44-5.yaml
LKP: ttyS0: 298: LKP: rebooting forcely
[ 24.038119][ T298] sysrq: Emergency Sync
[ 24.038784][ T25] Emergency Sync complete
[ 24.039170][ T298] sysrq: Resetting
I examined more closely the changes between v2 and v3 and I don't see
anything that would lead to this error either (I'm assuming v2 is
okay because this report wasn't generated for it). Looking at the
stack trace too, I'm not seeing anything that sticks out (eg this
looks like a memory mapping failure and bhash2 didn't modify mapping
or paging code).
I don't think this bug report is related to the bhash2 changes. But
please let me know if you disagree.
Thanks,
Joanne
>
>
> --
> 0-DAY CI Kernel Test Service
> https://01.org/lkp
>
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [net] 03d56978dd: BUG:Bad_page_map_in_process
2022-07-27 23:41 ` Joanne Koong
(?)
@ 2022-07-29 5:45 ` Oliver Sang
-1 siblings, 0 replies; 21+ messages in thread
From: Oliver Sang @ 2022-07-29 5:45 UTC (permalink / raw)
To: Joanne Koong
Cc: 0day robot, LKML, netdev, dccp, lkp, Paolo Abeni, Eric Dumazet,
Jakub Kicinski, Martin KaFai Lau, David Miller, yujie.liu,
fengwei.yin
hi, Joanne,
On Wed, Jul 27, 2022 at 04:41:04PM -0700, Joanne Koong wrote:
>
> I examined more closely the changes between v2 and v3 and I don't see
> anything that would lead to this error either (I'm assuming v2 is
> okay because this report wasn't generated for it). Looking at the
> stack trace too, I'm not seeing anything that sticks out (eg this
> looks like a memory mapping failure and bhash2 didn't modify mapping
> or paging code).
>
> I don't think this bug report is related to the bhash2 changes. But
> please let me know if you disagree.
thanks for detail information. we are running more tests to confirm now.
will update you later.
>
> Thanks,
> Joanne
>
> >
> >
> > --
> > 0-DAY CI Kernel Test Service
> > https://01.org/lkp
> >
> >
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [net] 03d56978dd: BUG:Bad_page_map_in_process
@ 2022-07-29 5:45 ` Oliver Sang
0 siblings, 0 replies; 21+ messages in thread
From: Oliver Sang @ 2022-07-29 5:45 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 785 bytes --]
hi, Joanne,
On Wed, Jul 27, 2022 at 04:41:04PM -0700, Joanne Koong wrote:
>
> I examined more closely the changes between v2 and v3 and I don't see
> anything that would lead to this error either (I'm assuming v2 is
> okay because this report wasn't generated for it). Looking at the
> stack trace too, I'm not seeing anything that sticks out (eg this
> looks like a memory mapping failure and bhash2 didn't modify mapping
> or paging code).
>
> I don't think this bug report is related to the bhash2 changes. But
> please let me know if you disagree.
thanks for detail information. we are running more tests to confirm now.
will update you later.
>
> Thanks,
> Joanne
>
> >
> >
> > --
> > 0-DAY CI Kernel Test Service
> > https://01.org/lkp
> >
> >
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [net] 03d56978dd: BUG:Bad_page_map_in_process
@ 2022-07-29 5:45 ` Oliver Sang
0 siblings, 0 replies; 21+ messages in thread
From: Oliver Sang @ 2022-07-29 5:45 UTC (permalink / raw)
To: dccp
hi, Joanne,
On Wed, Jul 27, 2022 at 04:41:04PM -0700, Joanne Koong wrote:
>
> I examined more closely the changes between v2 and v3 and I don't see
> anything that would lead to this error either (I'm assuming v2 is
> okay because this report wasn't generated for it). Looking at the
> stack trace too, I'm not seeing anything that sticks out (eg this
> looks like a memory mapping failure and bhash2 didn't modify mapping
> or paging code).
>
> I don't think this bug report is related to the bhash2 changes. But
> please let me know if you disagree.
thanks for detail information. we are running more tests to confirm now.
will update you later.
>
> Thanks,
> Joanne
>
> >
> >
> > --
> > 0-DAY CI Kernel Test Service
> > https://01.org/lkp
> >
> >
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address
2022-07-22 19:54 ` [PATCH net-next v3 1/3] net: Add a bhash2 " Joanne Koong
2022-07-25 16:58 ` kernel test robot
@ 2022-07-31 18:46 ` kernel test robot
1 sibling, 0 replies; 21+ messages in thread
From: kernel test robot @ 2022-07-31 18:46 UTC (permalink / raw)
To: Joanne Koong, netdev
Cc: kbuild-all, pabeni, edumazet, kuba, kafai, davem, Joanne Koong
Hi Joanne,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on net-next/master]
url: https://github.com/intel-lab-lkp/linux/commits/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
base: https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git 949d6b405e6160ae44baea39192d67b39cb7eeac
config: sh-randconfig-m041-20220722 (https://download.01.org/0day-ci/archive/20220801/202208010253.SjaFtOB8-lkp@intel.com/config)
compiler: sh4-linux-gcc (GCC) 12.1.0
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
smatch warnings:
include/net/inet_hashtables.h:265 inet_bhashfn_portaddr() warn: inconsistent indenting
vim +265 include/net/inet_hashtables.h
253
254 static inline struct inet_bind_hashbucket *
255 inet_bhashfn_portaddr(const struct inet_hashinfo *hinfo, const struct sock *sk,
256 const struct net *net, unsigned short port)
257 {
258 u32 hash;
259
260 #if IS_ENABLED(CONFIG_IPV6)
261 if (sk->sk_family == AF_INET6)
262 hash = ipv6_portaddr_hash(net, &sk->sk_v6_rcv_saddr, port);
263 else
264 #endif
> 265 hash = ipv4_portaddr_hash(net, sk->sk_rcv_saddr, port);
266 return &hinfo->bhash2[hash & (hinfo->bhash_size - 1)];
267 }
268
--
0-DAY CI Kernel Test Service
https://01.org/lkp
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [net] 03d56978dd: BUG:Bad_page_map_in_process
2022-07-27 23:41 ` Joanne Koong
@ 2022-08-05 7:29 ` Yujie Liu
-1 siblings, 0 replies; 21+ messages in thread
From: Yujie Liu @ 2022-08-05 7:29 UTC (permalink / raw)
To: Joanne Koong
Cc: 0day robot, LKML, netdev, dccp, lkp, Paolo Abeni, Eric Dumazet,
Jakub Kicinski, Martin KaFai Lau, David Miller,
kernel test robot
[-- Attachment #1: Type: text/plain, Size: 9631 bytes --]
Hi Joanne,
On 7/28/2022 07:41, Joanne Koong wrote:
> On Sun, Jul 24, 2022 at 7:05 AM kernel test robot <oliver.sang@intel.com> wrote:
>>
>>
>>
>> Greeting,
>>
>> FYI, we noticed the following commit (built with gcc-11):
>>
>> commit: 03d56978dd246147e151916e4dc72af7bc24d5c9 ("[PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address")
>> url: https://github.com/intel-lab-lkp/linux/commits/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
>> base: https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git 949d6b405e6160ae44baea39192d67b39cb7eeac
>> patch link: https://lore.kernel.org/netdev/20220722195406.1304948-2-joannelkoong@gmail.com
>>
>> in testcase: boot
>>
>> on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
>>
>> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
>>
>>
>>
>> If you fix the issue, kindly add following tag
>> Reported-by: kernel test robot <oliver.sang@intel.com>
>>
>>
>> [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
>> [ 103.873143][ T486] addr:00007f9fe52a2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f928adcb58 index:1a1
>> [ 103.875128][ T486] file:libcrypto.so.1.1 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
>> [ 103.877339][ T486] CPU: 0 PID: 486 Comm: rsync Not tainted 5.19.0-rc7-01443-g03d56978dd24 #1
>> [ 103.879032][ T486] Call Trace:
>> [ 103.879742][ T486] <TASK>
>> [ 103.880329][ T486] ? simple_write_end+0x140/0x140
>> [ 103.881338][ T486] dump_stack_lvl+0x3b/0x53
>> [ 103.882274][ T486] ? __filemap_get_folio+0x780/0x780
>> [ 103.883270][ T486] print_bad_pte.cold+0x15b/0x1c5
>> [ 103.884202][ T486] vm_normal_page+0x65/0x140
>> [ 103.885062][ T486] zap_pte_range+0x23b/0x9c0
>> [ 103.885897][ T486] unmap_page_range+0x263/0x5c0
>> [ 103.886846][ T486] unmap_vmas+0x121/0x200
>> [ 103.887628][ T486] exit_mmap+0xb5/0x240
>> [ 103.888401][ T486] mmput+0x3b/0x140
>> [ 103.889134][ T486] exit_mm+0xff/0x180
>> [ 103.889877][ T486] do_exit+0x100/0x400
>> [ 103.890661][ T486] do_group_exit+0x3e/0x100
>> [ 103.891514][ T486] __x64_sys_exit_group+0x18/0x40
>> [ 103.892494][ T486] do_syscall_64+0x5d/0x80
>> [ 103.893294][ T486] ? do_user_addr_fault+0x257/0x6c0
>> [ 103.894238][ T486] ? lock_release+0x6e/0x100
>> [ 103.895171][ T486] ? up_read+0x12/0x40
>> [ 103.896036][ T486] ? exc_page_fault+0xb2/0x2c0
>> [ 103.897021][ T486] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
>> [ 103.898243][ T486] RIP: 0033:0x7f9fe5007699
>> [ 103.899149][ T486] Code: Unable to access opcode bytes at RIP 0x7f9fe500766f.
>> [ 103.900511][ T486] RSP: 002b:00007fff7e32c3a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
>> [ 103.902027][ T486] RAX: ffffffffffffffda RBX: 00007f9fe50fc610 RCX: 00007f9fe5007699
>> [ 103.903477][ T486] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
>> [ 103.904943][ T486] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
>> [ 103.906384][ T486] R10: 000000000000000b R11: 0000000000000246 R12: 00007f9fe50fc610
>> [ 103.907823][ T486] R13: 0000000000000001 R14: 00007f9fe50fcae8 R15: 0000000000000000
>> [ 103.909290][ T486] </TASK>
>> [ 103.910423][ T486] Disabling lock debugging due to kernel taint
>> [ 107.503093][ T508] BUG: Bad page map in process rsync pte:ffff92f93b7fe508 pmd:13aa1c067
>> [ 107.504948][ T508] addr:00007fced9aa2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f92891ab58 index:9a
>> [ 107.507070][ T508] file:libzstd.so.1.4.8 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
>> [ 107.508825][ T508] CPU: 0 PID: 508 Comm: rsync Tainted: G B 5.19.0-rc7-01443-g03d56978dd24 #1
>> [ 107.510762][ T508] Call Trace:
>> [ 107.511458][ T508] <TASK>
>> [ 107.512058][ T508] ? simple_write_end+0x140/0x140
>> [ 107.513072][ T508] dump_stack_lvl+0x3b/0x53
>> [ 107.513990][ T508] ? __filemap_get_folio+0x780/0x780
>> [ 107.519166][ T508] print_bad_pte.cold+0x15b/0x1c5
>> [ 107.520032][ T508] vm_normal_page+0x65/0x140
>> [ 107.520802][ T508] zap_pte_range+0x23b/0x9c0
>> [ 107.521548][ T508] unmap_page_range+0x263/0x5c0
>> [ 107.522355][ T508] unmap_vmas+0x121/0x200
>> [ 107.523247][ T508] exit_mmap+0xb5/0x240
>> [ 107.524107][ T508] mmput+0x3b/0x140
>> [ 107.524908][ T508] exit_mm+0xff/0x180
>> [ 107.525716][ T508] do_exit+0x100/0x400
>> [ 107.526613][ T508] do_group_exit+0x3e/0x100
>> [ 107.527541][ T508] __x64_sys_exit_group+0x18/0x40
>> [ 107.528450][ T508] do_syscall_64+0x5d/0x80
>> [ 107.529368][ T508] ? up_read+0x12/0x40
>> [ 107.530228][ T508] ? do_user_addr_fault+0x257/0x6c0
>> [ 107.531121][ T508] ? rcu_read_lock_sched_held+0x5/0x40
>> [ 107.532046][ T508] ? exc_page_fault+0xb2/0x2c0
>> [ 107.532843][ T508] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
>> [ 107.533866][ T508] RIP: 0033:0x7fced95ff699
>> [ 107.534781][ T508] Code: Unable to access opcode bytes at RIP 0x7fced95ff66f.
>> [ 107.536225][ T508] RSP: 002b:00007fff162474c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
>> [ 107.537871][ T508] RAX: ffffffffffffffda RBX: 00007fced96f4610 RCX: 00007fced95ff699
>> [ 107.539506][ T508] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
>> [ 107.541126][ T508] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
>> [ 107.542743][ T508] R10: 000000000000000b R11: 0000000000000246 R12: 00007fced96f4610
>> [ 107.544310][ T508] R13: 0000000000000001 R14: 00007fced96f4ae8 R15: 0000000000000000
>> [ 107.545881][ T508] </TASK>
>>
>>
>>
>> To reproduce:
>>
>> # build kernel
>> cd linux
>> cp config-5.19.0-rc7-01443-g03d56978dd24 .config
>> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
>> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
>> cd <mod-install-dir>
>> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
>>
>>
>> git clone https://github.com/intel/lkp-tests.git
>> cd lkp-tests
>> bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
>>
>> # if come across any failure that blocks the test,
>> # please remove ~/.lkp and /lkp dir to run from a clean state.
>>
> I ran this in a loop ~20 times but I'm not able to repro the crash.
> This is a snippet of what I see (and I can also attach or paste the
> entire log if that would be helpful):
>
> I examined more closely the changes between v2 and v3 and I don't see
> anything that would lead to this error either (I'm assuming v2 is
> okay because this report wasn't generated for it). Looking at the
> stack trace too, I'm not seeing anything that sticks out (eg this
> looks like a memory mapping failure and bhash2 didn't modify mapping
> or paging code).
We chose commit 949d6b405e61 (net: add missing includes and forward
declarations under net/) as base, which used to be the head of
net-next/master branch then, and apply your v3 patches on top of it.
So the test result is a comparison between 949d6b405e61 and v3.
Refer to the bug info:
[ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
The BUG happens in rsync, and it reminds me that we have some extra
steps when running the test in our infrastructure. We will use some
commands such as `wget` and `rsync` to transfer the test result to
our server, but these steps are not included when reproducing locally.
Then I come up with an idea that maybe the kernel can boot successfully,
but the v3 patch may have some impacts on the command involving network
operations.
Could you please help to apply below hack on the latest version of
lkp-tests, and retry to see if can reproduce the crash? It is just
a meaningless `wget` command to involve network in local test and align
with the steps in our testing environment.
diff --git a/lib/upload.sh b/lib/upload.sh
index 257b498db..e8801736e 100755
--- a/lib/upload.sh
+++ b/lib/upload.sh
@@ -181,7 +181,8 @@ upload_files()
fi
else
# 9pfs, copy directly
- upload_files_copy "$@"
+ wget 127.0.0.1
return
fi
}
After applying above hack, I've tried to run 20 times on base and v3 patch
respectively. All runs of base are good, but there are 8 crash runs of v3.
Reproducing steps:
cd linux
git remote add net-next https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git
git fetch net-next master
git checkout 949d6b405e61 # checkout to base
git am <v3.patch>
cp config-5.19.0-rc7-01443-g03d56978dd24 .config # config file is attached
make ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
mkdir <mod-install-dir>
make ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
cd <mod-install-dir>
find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
# apply the hack mentioned above
bin/lkp qemu -k <bzImage> -m <mod-install-dir>/modules.cgz job-script # job-script is attached in this email
--
Best Regards,
Yujie
>
> I don't think this bug report is related to the bhash2 changes. But
> please let me know if you disagree.
>
> Thanks,
> Joanne
>
>>
>>
>> --
>> 0-DAY CI Kernel Test Service
>> https://01.org/lkp
>>
>>
[-- Attachment #2: config-5.19.0-rc7-01443-g03d56978dd24 --]
[-- Type: application/x-unknown-content-type, Size: 124836 bytes --]
[-- Attachment #3: job-script --]
[-- Type: application/x-unknown-content-type, Size: 5031 bytes --]
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [net] 03d56978dd: BUG:Bad_page_map_in_process
@ 2022-08-05 7:29 ` Yujie Liu
0 siblings, 0 replies; 21+ messages in thread
From: Yujie Liu @ 2022-08-05 7:29 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 9843 bytes --]
Hi Joanne,
On 7/28/2022 07:41, Joanne Koong wrote:
> On Sun, Jul 24, 2022 at 7:05 AM kernel test robot <oliver.sang@intel.com> wrote:
>>
>>
>>
>> Greeting,
>>
>> FYI, we noticed the following commit (built with gcc-11):
>>
>> commit: 03d56978dd246147e151916e4dc72af7bc24d5c9 ("[PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address")
>> url: https://github.com/intel-lab-lkp/linux/commits/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
>> base: https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git 949d6b405e6160ae44baea39192d67b39cb7eeac
>> patch link: https://lore.kernel.org/netdev/20220722195406.1304948-2-joannelkoong(a)gmail.com
>>
>> in testcase: boot
>>
>> on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
>>
>> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
>>
>>
>>
>> If you fix the issue, kindly add following tag
>> Reported-by: kernel test robot <oliver.sang@intel.com>
>>
>>
>> [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
>> [ 103.873143][ T486] addr:00007f9fe52a2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f928adcb58 index:1a1
>> [ 103.875128][ T486] file:libcrypto.so.1.1 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
>> [ 103.877339][ T486] CPU: 0 PID: 486 Comm: rsync Not tainted 5.19.0-rc7-01443-g03d56978dd24 #1
>> [ 103.879032][ T486] Call Trace:
>> [ 103.879742][ T486] <TASK>
>> [ 103.880329][ T486] ? simple_write_end+0x140/0x140
>> [ 103.881338][ T486] dump_stack_lvl+0x3b/0x53
>> [ 103.882274][ T486] ? __filemap_get_folio+0x780/0x780
>> [ 103.883270][ T486] print_bad_pte.cold+0x15b/0x1c5
>> [ 103.884202][ T486] vm_normal_page+0x65/0x140
>> [ 103.885062][ T486] zap_pte_range+0x23b/0x9c0
>> [ 103.885897][ T486] unmap_page_range+0x263/0x5c0
>> [ 103.886846][ T486] unmap_vmas+0x121/0x200
>> [ 103.887628][ T486] exit_mmap+0xb5/0x240
>> [ 103.888401][ T486] mmput+0x3b/0x140
>> [ 103.889134][ T486] exit_mm+0xff/0x180
>> [ 103.889877][ T486] do_exit+0x100/0x400
>> [ 103.890661][ T486] do_group_exit+0x3e/0x100
>> [ 103.891514][ T486] __x64_sys_exit_group+0x18/0x40
>> [ 103.892494][ T486] do_syscall_64+0x5d/0x80
>> [ 103.893294][ T486] ? do_user_addr_fault+0x257/0x6c0
>> [ 103.894238][ T486] ? lock_release+0x6e/0x100
>> [ 103.895171][ T486] ? up_read+0x12/0x40
>> [ 103.896036][ T486] ? exc_page_fault+0xb2/0x2c0
>> [ 103.897021][ T486] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
>> [ 103.898243][ T486] RIP: 0033:0x7f9fe5007699
>> [ 103.899149][ T486] Code: Unable to access opcode bytes at RIP 0x7f9fe500766f.
>> [ 103.900511][ T486] RSP: 002b:00007fff7e32c3a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
>> [ 103.902027][ T486] RAX: ffffffffffffffda RBX: 00007f9fe50fc610 RCX: 00007f9fe5007699
>> [ 103.903477][ T486] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
>> [ 103.904943][ T486] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
>> [ 103.906384][ T486] R10: 000000000000000b R11: 0000000000000246 R12: 00007f9fe50fc610
>> [ 103.907823][ T486] R13: 0000000000000001 R14: 00007f9fe50fcae8 R15: 0000000000000000
>> [ 103.909290][ T486] </TASK>
>> [ 103.910423][ T486] Disabling lock debugging due to kernel taint
>> [ 107.503093][ T508] BUG: Bad page map in process rsync pte:ffff92f93b7fe508 pmd:13aa1c067
>> [ 107.504948][ T508] addr:00007fced9aa2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f92891ab58 index:9a
>> [ 107.507070][ T508] file:libzstd.so.1.4.8 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
>> [ 107.508825][ T508] CPU: 0 PID: 508 Comm: rsync Tainted: G B 5.19.0-rc7-01443-g03d56978dd24 #1
>> [ 107.510762][ T508] Call Trace:
>> [ 107.511458][ T508] <TASK>
>> [ 107.512058][ T508] ? simple_write_end+0x140/0x140
>> [ 107.513072][ T508] dump_stack_lvl+0x3b/0x53
>> [ 107.513990][ T508] ? __filemap_get_folio+0x780/0x780
>> [ 107.519166][ T508] print_bad_pte.cold+0x15b/0x1c5
>> [ 107.520032][ T508] vm_normal_page+0x65/0x140
>> [ 107.520802][ T508] zap_pte_range+0x23b/0x9c0
>> [ 107.521548][ T508] unmap_page_range+0x263/0x5c0
>> [ 107.522355][ T508] unmap_vmas+0x121/0x200
>> [ 107.523247][ T508] exit_mmap+0xb5/0x240
>> [ 107.524107][ T508] mmput+0x3b/0x140
>> [ 107.524908][ T508] exit_mm+0xff/0x180
>> [ 107.525716][ T508] do_exit+0x100/0x400
>> [ 107.526613][ T508] do_group_exit+0x3e/0x100
>> [ 107.527541][ T508] __x64_sys_exit_group+0x18/0x40
>> [ 107.528450][ T508] do_syscall_64+0x5d/0x80
>> [ 107.529368][ T508] ? up_read+0x12/0x40
>> [ 107.530228][ T508] ? do_user_addr_fault+0x257/0x6c0
>> [ 107.531121][ T508] ? rcu_read_lock_sched_held+0x5/0x40
>> [ 107.532046][ T508] ? exc_page_fault+0xb2/0x2c0
>> [ 107.532843][ T508] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
>> [ 107.533866][ T508] RIP: 0033:0x7fced95ff699
>> [ 107.534781][ T508] Code: Unable to access opcode bytes at RIP 0x7fced95ff66f.
>> [ 107.536225][ T508] RSP: 002b:00007fff162474c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
>> [ 107.537871][ T508] RAX: ffffffffffffffda RBX: 00007fced96f4610 RCX: 00007fced95ff699
>> [ 107.539506][ T508] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
>> [ 107.541126][ T508] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
>> [ 107.542743][ T508] R10: 000000000000000b R11: 0000000000000246 R12: 00007fced96f4610
>> [ 107.544310][ T508] R13: 0000000000000001 R14: 00007fced96f4ae8 R15: 0000000000000000
>> [ 107.545881][ T508] </TASK>
>>
>>
>>
>> To reproduce:
>>
>> # build kernel
>> cd linux
>> cp config-5.19.0-rc7-01443-g03d56978dd24 .config
>> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
>> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
>> cd <mod-install-dir>
>> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
>>
>>
>> git clone https://github.com/intel/lkp-tests.git
>> cd lkp-tests
>> bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
>>
>> # if come across any failure that blocks the test,
>> # please remove ~/.lkp and /lkp dir to run from a clean state.
>>
> I ran this in a loop ~20 times but I'm not able to repro the crash.
> This is a snippet of what I see (and I can also attach or paste the
> entire log if that would be helpful):
>
> I examined more closely the changes between v2 and v3 and I don't see
> anything that would lead to this error either (I'm assuming v2 is
> okay because this report wasn't generated for it). Looking at the
> stack trace too, I'm not seeing anything that sticks out (eg this
> looks like a memory mapping failure and bhash2 didn't modify mapping
> or paging code).
We chose commit 949d6b405e61 (net: add missing includes and forward
declarations under net/) as base, which used to be the head of
net-next/master branch then, and apply your v3 patches on top of it.
So the test result is a comparison between 949d6b405e61 and v3.
Refer to the bug info:
[ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
The BUG happens in rsync, and it reminds me that we have some extra
steps when running the test in our infrastructure. We will use some
commands such as `wget` and `rsync` to transfer the test result to
our server, but these steps are not included when reproducing locally.
Then I come up with an idea that maybe the kernel can boot successfully,
but the v3 patch may have some impacts on the command involving network
operations.
Could you please help to apply below hack on the latest version of
lkp-tests, and retry to see if can reproduce the crash? It is just
a meaningless `wget` command to involve network in local test and align
with the steps in our testing environment.
diff --git a/lib/upload.sh b/lib/upload.sh
index 257b498db..e8801736e 100755
--- a/lib/upload.sh
+++ b/lib/upload.sh
@@ -181,7 +181,8 @@ upload_files()
fi
else
# 9pfs, copy directly
- upload_files_copy "$@"
+ wget 127.0.0.1
return
fi
}
After applying above hack, I've tried to run 20 times on base and v3 patch
respectively. All runs of base are good, but there are 8 crash runs of v3.
Reproducing steps:
cd linux
git remote add net-next https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git
git fetch net-next master
git checkout 949d6b405e61 # checkout to base
git am <v3.patch>
cp config-5.19.0-rc7-01443-g03d56978dd24 .config # config file is attached
make ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
mkdir <mod-install-dir>
make ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
cd <mod-install-dir>
find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
# apply the hack mentioned above
bin/lkp qemu -k <bzImage> -m <mod-install-dir>/modules.cgz job-script # job-script is attached in this email
--
Best Regards,
Yujie
>
> I don't think this bug report is related to the bhash2 changes. But
> please let me know if you disagree.
>
> Thanks,
> Joanne
>
>>
>>
>> --
>> 0-DAY CI Kernel Test Service
>> https://01.org/lkp
>>
>>
[-- Attachment #2: config-5.19.0-rc7-01443-g03d56978dd24 --]
[-- Type: application/x-unknown-content-type, Size: 124836 bytes --]
[-- Attachment #3: job-script.bin --]
[-- Type: application/x-unknown-content-type, Size: 5031 bytes --]
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [net] 03d56978dd: BUG:Bad_page_map_in_process
2022-08-05 7:29 ` Yujie Liu
(?)
@ 2022-08-09 16:52 ` Joanne Koong
-1 siblings, 0 replies; 21+ messages in thread
From: Joanne Koong @ 2022-08-09 16:52 UTC (permalink / raw)
To: Yujie Liu
Cc: 0day robot, LKML, netdev, dccp, lkp, Paolo Abeni, Eric Dumazet,
Jakub Kicinski, Martin KaFai Lau, David Miller,
kernel test robot
On Fri, Aug 5, 2022 at 12:30 AM Yujie Liu <yujie.liu@intel.com> wrote:
>
> Hi Joanne,
>
> On 7/28/2022 07:41, Joanne Koong wrote:
> > On Sun, Jul 24, 2022 at 7:05 AM kernel test robot <oliver.sang@intel.com> wrote:
> >>
> >>
> >>
> >> Greeting,
> >>
> >> FYI, we noticed the following commit (built with gcc-11):
> >>
> >> commit: 03d56978dd246147e151916e4dc72af7bc24d5c9 ("[PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address")
> >> url: https://github.com/intel-lab-lkp/linux/commits/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
> >> base: https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git 949d6b405e6160ae44baea39192d67b39cb7eeac
> >> patch link: https://lore.kernel.org/netdev/20220722195406.1304948-2-joannelkoong@gmail.com
> >>
> >> in testcase: boot
> >>
> >> on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
> >>
> >> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
> >>
> >>
> >>
> >> If you fix the issue, kindly add following tag
> >> Reported-by: kernel test robot <oliver.sang@intel.com>
> >>
> >>
> >> [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
> >> [ 103.873143][ T486] addr:00007f9fe52a2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f928adcb58 index:1a1
> >> [ 103.875128][ T486] file:libcrypto.so.1.1 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> >> [ 103.877339][ T486] CPU: 0 PID: 486 Comm: rsync Not tainted 5.19.0-rc7-01443-g03d56978dd24 #1
> >> [ 103.879032][ T486] Call Trace:
> >> [ 103.879742][ T486] <TASK>
> >> [ 103.880329][ T486] ? simple_write_end+0x140/0x140
> >> [ 103.881338][ T486] dump_stack_lvl+0x3b/0x53
> >> [ 103.882274][ T486] ? __filemap_get_folio+0x780/0x780
> >> [ 103.883270][ T486] print_bad_pte.cold+0x15b/0x1c5
> >> [ 103.884202][ T486] vm_normal_page+0x65/0x140
> >> [ 103.885062][ T486] zap_pte_range+0x23b/0x9c0
> >> [ 103.885897][ T486] unmap_page_range+0x263/0x5c0
> >> [ 103.886846][ T486] unmap_vmas+0x121/0x200
> >> [ 103.887628][ T486] exit_mmap+0xb5/0x240
> >> [ 103.888401][ T486] mmput+0x3b/0x140
> >> [ 103.889134][ T486] exit_mm+0xff/0x180
> >> [ 103.889877][ T486] do_exit+0x100/0x400
> >> [ 103.890661][ T486] do_group_exit+0x3e/0x100
> >> [ 103.891514][ T486] __x64_sys_exit_group+0x18/0x40
> >> [ 103.892494][ T486] do_syscall_64+0x5d/0x80
> >> [ 103.893294][ T486] ? do_user_addr_fault+0x257/0x6c0
> >> [ 103.894238][ T486] ? lock_release+0x6e/0x100
> >> [ 103.895171][ T486] ? up_read+0x12/0x40
> >> [ 103.896036][ T486] ? exc_page_fault+0xb2/0x2c0
> >> [ 103.897021][ T486] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> >> [ 103.898243][ T486] RIP: 0033:0x7f9fe5007699
> >> [ 103.899149][ T486] Code: Unable to access opcode bytes at RIP 0x7f9fe500766f.
> >> [ 103.900511][ T486] RSP: 002b:00007fff7e32c3a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> >> [ 103.902027][ T486] RAX: ffffffffffffffda RBX: 00007f9fe50fc610 RCX: 00007f9fe5007699
> >> [ 103.903477][ T486] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> >> [ 103.904943][ T486] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> >> [ 103.906384][ T486] R10: 000000000000000b R11: 0000000000000246 R12: 00007f9fe50fc610
> >> [ 103.907823][ T486] R13: 0000000000000001 R14: 00007f9fe50fcae8 R15: 0000000000000000
> >> [ 103.909290][ T486] </TASK>
> >> [ 103.910423][ T486] Disabling lock debugging due to kernel taint
> >> [ 107.503093][ T508] BUG: Bad page map in process rsync pte:ffff92f93b7fe508 pmd:13aa1c067
> >> [ 107.504948][ T508] addr:00007fced9aa2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f92891ab58 index:9a
> >> [ 107.507070][ T508] file:libzstd.so.1.4.8 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> >> [ 107.508825][ T508] CPU: 0 PID: 508 Comm: rsync Tainted: G B 5.19.0-rc7-01443-g03d56978dd24 #1
> >> [ 107.510762][ T508] Call Trace:
> >> [ 107.511458][ T508] <TASK>
> >> [ 107.512058][ T508] ? simple_write_end+0x140/0x140
> >> [ 107.513072][ T508] dump_stack_lvl+0x3b/0x53
> >> [ 107.513990][ T508] ? __filemap_get_folio+0x780/0x780
> >> [ 107.519166][ T508] print_bad_pte.cold+0x15b/0x1c5
> >> [ 107.520032][ T508] vm_normal_page+0x65/0x140
> >> [ 107.520802][ T508] zap_pte_range+0x23b/0x9c0
> >> [ 107.521548][ T508] unmap_page_range+0x263/0x5c0
> >> [ 107.522355][ T508] unmap_vmas+0x121/0x200
> >> [ 107.523247][ T508] exit_mmap+0xb5/0x240
> >> [ 107.524107][ T508] mmput+0x3b/0x140
> >> [ 107.524908][ T508] exit_mm+0xff/0x180
> >> [ 107.525716][ T508] do_exit+0x100/0x400
> >> [ 107.526613][ T508] do_group_exit+0x3e/0x100
> >> [ 107.527541][ T508] __x64_sys_exit_group+0x18/0x40
> >> [ 107.528450][ T508] do_syscall_64+0x5d/0x80
> >> [ 107.529368][ T508] ? up_read+0x12/0x40
> >> [ 107.530228][ T508] ? do_user_addr_fault+0x257/0x6c0
> >> [ 107.531121][ T508] ? rcu_read_lock_sched_held+0x5/0x40
> >> [ 107.532046][ T508] ? exc_page_fault+0xb2/0x2c0
> >> [ 107.532843][ T508] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> >> [ 107.533866][ T508] RIP: 0033:0x7fced95ff699
> >> [ 107.534781][ T508] Code: Unable to access opcode bytes at RIP 0x7fced95ff66f.
> >> [ 107.536225][ T508] RSP: 002b:00007fff162474c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> >> [ 107.537871][ T508] RAX: ffffffffffffffda RBX: 00007fced96f4610 RCX: 00007fced95ff699
> >> [ 107.539506][ T508] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> >> [ 107.541126][ T508] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> >> [ 107.542743][ T508] R10: 000000000000000b R11: 0000000000000246 R12: 00007fced96f4610
> >> [ 107.544310][ T508] R13: 0000000000000001 R14: 00007fced96f4ae8 R15: 0000000000000000
> >> [ 107.545881][ T508] </TASK>
> >>
> >>
> >>
> >> To reproduce:
> >>
> >> # build kernel
> >> cd linux
> >> cp config-5.19.0-rc7-01443-g03d56978dd24 .config
> >> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> >> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> >> cd <mod-install-dir>
> >> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
> >>
> >>
> >> git clone https://github.com/intel/lkp-tests.git
> >> cd lkp-tests
> >> bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
> >>
> >> # if come across any failure that blocks the test,
> >> # please remove ~/.lkp and /lkp dir to run from a clean state.
> >>
> > I ran this in a loop ~20 times but I'm not able to repro the crash.
> > This is a snippet of what I see (and I can also attach or paste the
> > entire log if that would be helpful):
> >
> > I examined more closely the changes between v2 and v3 and I don't see
> > anything that would lead to this error either (I'm assuming v2 is
> > okay because this report wasn't generated for it). Looking at the
> > stack trace too, I'm not seeing anything that sticks out (eg this
> > looks like a memory mapping failure and bhash2 didn't modify mapping
> > or paging code).
>
> We chose commit 949d6b405e61 (net: add missing includes and forward
> declarations under net/) as base, which used to be the head of
> net-next/master branch then, and apply your v3 patches on top of it.
> So the test result is a comparison between 949d6b405e61 and v3.
>
> Refer to the bug info:
>
> [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
>
> The BUG happens in rsync, and it reminds me that we have some extra
> steps when running the test in our infrastructure. We will use some
> commands such as `wget` and `rsync` to transfer the test result to
> our server, but these steps are not included when reproducing locally.
>
> Then I come up with an idea that maybe the kernel can boot successfully,
> but the v3 patch may have some impacts on the command involving network
> operations.
>
> Could you please help to apply below hack on the latest version of
> lkp-tests, and retry to see if can reproduce the crash? It is just
> a meaningless `wget` command to involve network in local test and align
> with the steps in our testing environment.
I will try to repro this this week. I'll let you know what I find.
>
> diff --git a/lib/upload.sh b/lib/upload.sh
> index 257b498db..e8801736e 100755
> --- a/lib/upload.sh
> +++ b/lib/upload.sh
> @@ -181,7 +181,8 @@ upload_files()
> fi
> else
> # 9pfs, copy directly
> - upload_files_copy "$@"
> + wget 127.0.0.1
> return
> fi
> }
>
> After applying above hack, I've tried to run 20 times on base and v3 patch
> respectively. All runs of base are good, but there are 8 crash runs of v3.
>
> Reproducing steps:
>
> cd linux
> git remote add net-next https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git
> git fetch net-next master
> git checkout 949d6b405e61 # checkout to base
> git am <v3.patch>
>
> cp config-5.19.0-rc7-01443-g03d56978dd24 .config # config file is attached
> make ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> mkdir <mod-install-dir>
> make ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> cd <mod-install-dir>
> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
>
> git clone https://github.com/intel/lkp-tests.git
> cd lkp-tests
> # apply the hack mentioned above
> bin/lkp qemu -k <bzImage> -m <mod-install-dir>/modules.cgz job-script # job-script is attached in this email
>
> --
> Best Regards,
> Yujie
>
> >
> > I don't think this bug report is related to the bhash2 changes. But
> > please let me know if you disagree.
> >
> > Thanks,
> > Joanne
> >
> >>
> >>
> >> --
> >> 0-DAY CI Kernel Test Service
> >> https://01.org/lkp
> >>
> >>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [net] 03d56978dd: BUG:Bad_page_map_in_process
@ 2022-08-09 16:52 ` Joanne Koong
0 siblings, 0 replies; 21+ messages in thread
From: Joanne Koong @ 2022-08-09 16:52 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 10471 bytes --]
On Fri, Aug 5, 2022 at 12:30 AM Yujie Liu <yujie.liu@intel.com> wrote:
>
> Hi Joanne,
>
> On 7/28/2022 07:41, Joanne Koong wrote:
> > On Sun, Jul 24, 2022 at 7:05 AM kernel test robot <oliver.sang@intel.com> wrote:
> >>
> >>
> >>
> >> Greeting,
> >>
> >> FYI, we noticed the following commit (built with gcc-11):
> >>
> >> commit: 03d56978dd246147e151916e4dc72af7bc24d5c9 ("[PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address")
> >> url: https://github.com/intel-lab-lkp/linux/commits/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
> >> base: https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git 949d6b405e6160ae44baea39192d67b39cb7eeac
> >> patch link: https://lore.kernel.org/netdev/20220722195406.1304948-2-joannelkoong(a)gmail.com
> >>
> >> in testcase: boot
> >>
> >> on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
> >>
> >> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
> >>
> >>
> >>
> >> If you fix the issue, kindly add following tag
> >> Reported-by: kernel test robot <oliver.sang@intel.com>
> >>
> >>
> >> [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
> >> [ 103.873143][ T486] addr:00007f9fe52a2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f928adcb58 index:1a1
> >> [ 103.875128][ T486] file:libcrypto.so.1.1 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> >> [ 103.877339][ T486] CPU: 0 PID: 486 Comm: rsync Not tainted 5.19.0-rc7-01443-g03d56978dd24 #1
> >> [ 103.879032][ T486] Call Trace:
> >> [ 103.879742][ T486] <TASK>
> >> [ 103.880329][ T486] ? simple_write_end+0x140/0x140
> >> [ 103.881338][ T486] dump_stack_lvl+0x3b/0x53
> >> [ 103.882274][ T486] ? __filemap_get_folio+0x780/0x780
> >> [ 103.883270][ T486] print_bad_pte.cold+0x15b/0x1c5
> >> [ 103.884202][ T486] vm_normal_page+0x65/0x140
> >> [ 103.885062][ T486] zap_pte_range+0x23b/0x9c0
> >> [ 103.885897][ T486] unmap_page_range+0x263/0x5c0
> >> [ 103.886846][ T486] unmap_vmas+0x121/0x200
> >> [ 103.887628][ T486] exit_mmap+0xb5/0x240
> >> [ 103.888401][ T486] mmput+0x3b/0x140
> >> [ 103.889134][ T486] exit_mm+0xff/0x180
> >> [ 103.889877][ T486] do_exit+0x100/0x400
> >> [ 103.890661][ T486] do_group_exit+0x3e/0x100
> >> [ 103.891514][ T486] __x64_sys_exit_group+0x18/0x40
> >> [ 103.892494][ T486] do_syscall_64+0x5d/0x80
> >> [ 103.893294][ T486] ? do_user_addr_fault+0x257/0x6c0
> >> [ 103.894238][ T486] ? lock_release+0x6e/0x100
> >> [ 103.895171][ T486] ? up_read+0x12/0x40
> >> [ 103.896036][ T486] ? exc_page_fault+0xb2/0x2c0
> >> [ 103.897021][ T486] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> >> [ 103.898243][ T486] RIP: 0033:0x7f9fe5007699
> >> [ 103.899149][ T486] Code: Unable to access opcode bytes at RIP 0x7f9fe500766f.
> >> [ 103.900511][ T486] RSP: 002b:00007fff7e32c3a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> >> [ 103.902027][ T486] RAX: ffffffffffffffda RBX: 00007f9fe50fc610 RCX: 00007f9fe5007699
> >> [ 103.903477][ T486] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> >> [ 103.904943][ T486] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> >> [ 103.906384][ T486] R10: 000000000000000b R11: 0000000000000246 R12: 00007f9fe50fc610
> >> [ 103.907823][ T486] R13: 0000000000000001 R14: 00007f9fe50fcae8 R15: 0000000000000000
> >> [ 103.909290][ T486] </TASK>
> >> [ 103.910423][ T486] Disabling lock debugging due to kernel taint
> >> [ 107.503093][ T508] BUG: Bad page map in process rsync pte:ffff92f93b7fe508 pmd:13aa1c067
> >> [ 107.504948][ T508] addr:00007fced9aa2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f92891ab58 index:9a
> >> [ 107.507070][ T508] file:libzstd.so.1.4.8 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> >> [ 107.508825][ T508] CPU: 0 PID: 508 Comm: rsync Tainted: G B 5.19.0-rc7-01443-g03d56978dd24 #1
> >> [ 107.510762][ T508] Call Trace:
> >> [ 107.511458][ T508] <TASK>
> >> [ 107.512058][ T508] ? simple_write_end+0x140/0x140
> >> [ 107.513072][ T508] dump_stack_lvl+0x3b/0x53
> >> [ 107.513990][ T508] ? __filemap_get_folio+0x780/0x780
> >> [ 107.519166][ T508] print_bad_pte.cold+0x15b/0x1c5
> >> [ 107.520032][ T508] vm_normal_page+0x65/0x140
> >> [ 107.520802][ T508] zap_pte_range+0x23b/0x9c0
> >> [ 107.521548][ T508] unmap_page_range+0x263/0x5c0
> >> [ 107.522355][ T508] unmap_vmas+0x121/0x200
> >> [ 107.523247][ T508] exit_mmap+0xb5/0x240
> >> [ 107.524107][ T508] mmput+0x3b/0x140
> >> [ 107.524908][ T508] exit_mm+0xff/0x180
> >> [ 107.525716][ T508] do_exit+0x100/0x400
> >> [ 107.526613][ T508] do_group_exit+0x3e/0x100
> >> [ 107.527541][ T508] __x64_sys_exit_group+0x18/0x40
> >> [ 107.528450][ T508] do_syscall_64+0x5d/0x80
> >> [ 107.529368][ T508] ? up_read+0x12/0x40
> >> [ 107.530228][ T508] ? do_user_addr_fault+0x257/0x6c0
> >> [ 107.531121][ T508] ? rcu_read_lock_sched_held+0x5/0x40
> >> [ 107.532046][ T508] ? exc_page_fault+0xb2/0x2c0
> >> [ 107.532843][ T508] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> >> [ 107.533866][ T508] RIP: 0033:0x7fced95ff699
> >> [ 107.534781][ T508] Code: Unable to access opcode bytes at RIP 0x7fced95ff66f.
> >> [ 107.536225][ T508] RSP: 002b:00007fff162474c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> >> [ 107.537871][ T508] RAX: ffffffffffffffda RBX: 00007fced96f4610 RCX: 00007fced95ff699
> >> [ 107.539506][ T508] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> >> [ 107.541126][ T508] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> >> [ 107.542743][ T508] R10: 000000000000000b R11: 0000000000000246 R12: 00007fced96f4610
> >> [ 107.544310][ T508] R13: 0000000000000001 R14: 00007fced96f4ae8 R15: 0000000000000000
> >> [ 107.545881][ T508] </TASK>
> >>
> >>
> >>
> >> To reproduce:
> >>
> >> # build kernel
> >> cd linux
> >> cp config-5.19.0-rc7-01443-g03d56978dd24 .config
> >> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> >> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> >> cd <mod-install-dir>
> >> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
> >>
> >>
> >> git clone https://github.com/intel/lkp-tests.git
> >> cd lkp-tests
> >> bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
> >>
> >> # if come across any failure that blocks the test,
> >> # please remove ~/.lkp and /lkp dir to run from a clean state.
> >>
> > I ran this in a loop ~20 times but I'm not able to repro the crash.
> > This is a snippet of what I see (and I can also attach or paste the
> > entire log if that would be helpful):
> >
> > I examined more closely the changes between v2 and v3 and I don't see
> > anything that would lead to this error either (I'm assuming v2 is
> > okay because this report wasn't generated for it). Looking at the
> > stack trace too, I'm not seeing anything that sticks out (eg this
> > looks like a memory mapping failure and bhash2 didn't modify mapping
> > or paging code).
>
> We chose commit 949d6b405e61 (net: add missing includes and forward
> declarations under net/) as base, which used to be the head of
> net-next/master branch then, and apply your v3 patches on top of it.
> So the test result is a comparison between 949d6b405e61 and v3.
>
> Refer to the bug info:
>
> [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
>
> The BUG happens in rsync, and it reminds me that we have some extra
> steps when running the test in our infrastructure. We will use some
> commands such as `wget` and `rsync` to transfer the test result to
> our server, but these steps are not included when reproducing locally.
>
> Then I come up with an idea that maybe the kernel can boot successfully,
> but the v3 patch may have some impacts on the command involving network
> operations.
>
> Could you please help to apply below hack on the latest version of
> lkp-tests, and retry to see if can reproduce the crash? It is just
> a meaningless `wget` command to involve network in local test and align
> with the steps in our testing environment.
I will try to repro this this week. I'll let you know what I find.
>
> diff --git a/lib/upload.sh b/lib/upload.sh
> index 257b498db..e8801736e 100755
> --- a/lib/upload.sh
> +++ b/lib/upload.sh
> @@ -181,7 +181,8 @@ upload_files()
> fi
> else
> # 9pfs, copy directly
> - upload_files_copy "$@"
> + wget 127.0.0.1
> return
> fi
> }
>
> After applying above hack, I've tried to run 20 times on base and v3 patch
> respectively. All runs of base are good, but there are 8 crash runs of v3.
>
> Reproducing steps:
>
> cd linux
> git remote add net-next https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git
> git fetch net-next master
> git checkout 949d6b405e61 # checkout to base
> git am <v3.patch>
>
> cp config-5.19.0-rc7-01443-g03d56978dd24 .config # config file is attached
> make ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> mkdir <mod-install-dir>
> make ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> cd <mod-install-dir>
> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
>
> git clone https://github.com/intel/lkp-tests.git
> cd lkp-tests
> # apply the hack mentioned above
> bin/lkp qemu -k <bzImage> -m <mod-install-dir>/modules.cgz job-script # job-script is attached in this email
>
> --
> Best Regards,
> Yujie
>
> >
> > I don't think this bug report is related to the bhash2 changes. But
> > please let me know if you disagree.
> >
> > Thanks,
> > Joanne
> >
> >>
> >>
> >> --
> >> 0-DAY CI Kernel Test Service
> >> https://01.org/lkp
> >>
> >>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [net] 03d56978dd: BUG:Bad_page_map_in_process
@ 2022-08-09 16:52 ` Joanne Koong
0 siblings, 0 replies; 21+ messages in thread
From: Joanne Koong @ 2022-08-09 16:52 UTC (permalink / raw)
To: dccp
On Fri, Aug 5, 2022 at 12:30 AM Yujie Liu <yujie.liu@intel.com> wrote:
>
> Hi Joanne,
>
> On 7/28/2022 07:41, Joanne Koong wrote:
> > On Sun, Jul 24, 2022 at 7:05 AM kernel test robot <oliver.sang@intel.com> wrote:
> >>
> >>
> >>
> >> Greeting,
> >>
> >> FYI, we noticed the following commit (built with gcc-11):
> >>
> >> commit: 03d56978dd246147e151916e4dc72af7bc24d5c9 ("[PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address")
> >> url: https://github.com/intel-lab-lkp/linux/commits/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
> >> base: https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git 949d6b405e6160ae44baea39192d67b39cb7eeac
> >> patch link: https://lore.kernel.org/netdev/20220722195406.1304948-2-joannelkoong@gmail.com
> >>
> >> in testcase: boot
> >>
> >> on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
> >>
> >> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
> >>
> >>
> >>
> >> If you fix the issue, kindly add following tag
> >> Reported-by: kernel test robot <oliver.sang@intel.com>
> >>
> >>
> >> [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
> >> [ 103.873143][ T486] addr:00007f9fe52a2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f928adcb58 index:1a1
> >> [ 103.875128][ T486] file:libcrypto.so.1.1 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> >> [ 103.877339][ T486] CPU: 0 PID: 486 Comm: rsync Not tainted 5.19.0-rc7-01443-g03d56978dd24 #1
> >> [ 103.879032][ T486] Call Trace:
> >> [ 103.879742][ T486] <TASK>
> >> [ 103.880329][ T486] ? simple_write_end+0x140/0x140
> >> [ 103.881338][ T486] dump_stack_lvl+0x3b/0x53
> >> [ 103.882274][ T486] ? __filemap_get_folio+0x780/0x780
> >> [ 103.883270][ T486] print_bad_pte.cold+0x15b/0x1c5
> >> [ 103.884202][ T486] vm_normal_page+0x65/0x140
> >> [ 103.885062][ T486] zap_pte_range+0x23b/0x9c0
> >> [ 103.885897][ T486] unmap_page_range+0x263/0x5c0
> >> [ 103.886846][ T486] unmap_vmas+0x121/0x200
> >> [ 103.887628][ T486] exit_mmap+0xb5/0x240
> >> [ 103.888401][ T486] mmput+0x3b/0x140
> >> [ 103.889134][ T486] exit_mm+0xff/0x180
> >> [ 103.889877][ T486] do_exit+0x100/0x400
> >> [ 103.890661][ T486] do_group_exit+0x3e/0x100
> >> [ 103.891514][ T486] __x64_sys_exit_group+0x18/0x40
> >> [ 103.892494][ T486] do_syscall_64+0x5d/0x80
> >> [ 103.893294][ T486] ? do_user_addr_fault+0x257/0x6c0
> >> [ 103.894238][ T486] ? lock_release+0x6e/0x100
> >> [ 103.895171][ T486] ? up_read+0x12/0x40
> >> [ 103.896036][ T486] ? exc_page_fault+0xb2/0x2c0
> >> [ 103.897021][ T486] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> >> [ 103.898243][ T486] RIP: 0033:0x7f9fe5007699
> >> [ 103.899149][ T486] Code: Unable to access opcode bytes at RIP 0x7f9fe500766f.
> >> [ 103.900511][ T486] RSP: 002b:00007fff7e32c3a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> >> [ 103.902027][ T486] RAX: ffffffffffffffda RBX: 00007f9fe50fc610 RCX: 00007f9fe5007699
> >> [ 103.903477][ T486] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> >> [ 103.904943][ T486] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> >> [ 103.906384][ T486] R10: 000000000000000b R11: 0000000000000246 R12: 00007f9fe50fc610
> >> [ 103.907823][ T486] R13: 0000000000000001 R14: 00007f9fe50fcae8 R15: 0000000000000000
> >> [ 103.909290][ T486] </TASK>
> >> [ 103.910423][ T486] Disabling lock debugging due to kernel taint
> >> [ 107.503093][ T508] BUG: Bad page map in process rsync pte:ffff92f93b7fe508 pmd:13aa1c067
> >> [ 107.504948][ T508] addr:00007fced9aa2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f92891ab58 index:9a
> >> [ 107.507070][ T508] file:libzstd.so.1.4.8 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> >> [ 107.508825][ T508] CPU: 0 PID: 508 Comm: rsync Tainted: G B 5.19.0-rc7-01443-g03d56978dd24 #1
> >> [ 107.510762][ T508] Call Trace:
> >> [ 107.511458][ T508] <TASK>
> >> [ 107.512058][ T508] ? simple_write_end+0x140/0x140
> >> [ 107.513072][ T508] dump_stack_lvl+0x3b/0x53
> >> [ 107.513990][ T508] ? __filemap_get_folio+0x780/0x780
> >> [ 107.519166][ T508] print_bad_pte.cold+0x15b/0x1c5
> >> [ 107.520032][ T508] vm_normal_page+0x65/0x140
> >> [ 107.520802][ T508] zap_pte_range+0x23b/0x9c0
> >> [ 107.521548][ T508] unmap_page_range+0x263/0x5c0
> >> [ 107.522355][ T508] unmap_vmas+0x121/0x200
> >> [ 107.523247][ T508] exit_mmap+0xb5/0x240
> >> [ 107.524107][ T508] mmput+0x3b/0x140
> >> [ 107.524908][ T508] exit_mm+0xff/0x180
> >> [ 107.525716][ T508] do_exit+0x100/0x400
> >> [ 107.526613][ T508] do_group_exit+0x3e/0x100
> >> [ 107.527541][ T508] __x64_sys_exit_group+0x18/0x40
> >> [ 107.528450][ T508] do_syscall_64+0x5d/0x80
> >> [ 107.529368][ T508] ? up_read+0x12/0x40
> >> [ 107.530228][ T508] ? do_user_addr_fault+0x257/0x6c0
> >> [ 107.531121][ T508] ? rcu_read_lock_sched_held+0x5/0x40
> >> [ 107.532046][ T508] ? exc_page_fault+0xb2/0x2c0
> >> [ 107.532843][ T508] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> >> [ 107.533866][ T508] RIP: 0033:0x7fced95ff699
> >> [ 107.534781][ T508] Code: Unable to access opcode bytes at RIP 0x7fced95ff66f.
> >> [ 107.536225][ T508] RSP: 002b:00007fff162474c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> >> [ 107.537871][ T508] RAX: ffffffffffffffda RBX: 00007fced96f4610 RCX: 00007fced95ff699
> >> [ 107.539506][ T508] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> >> [ 107.541126][ T508] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> >> [ 107.542743][ T508] R10: 000000000000000b R11: 0000000000000246 R12: 00007fced96f4610
> >> [ 107.544310][ T508] R13: 0000000000000001 R14: 00007fced96f4ae8 R15: 0000000000000000
> >> [ 107.545881][ T508] </TASK>
> >>
> >>
> >>
> >> To reproduce:
> >>
> >> # build kernel
> >> cd linux
> >> cp config-5.19.0-rc7-01443-g03d56978dd24 .config
> >> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> >> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> >> cd <mod-install-dir>
> >> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
> >>
> >>
> >> git clone https://github.com/intel/lkp-tests.git
> >> cd lkp-tests
> >> bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
> >>
> >> # if come across any failure that blocks the test,
> >> # please remove ~/.lkp and /lkp dir to run from a clean state.
> >>
> > I ran this in a loop ~20 times but I'm not able to repro the crash.
> > This is a snippet of what I see (and I can also attach or paste the
> > entire log if that would be helpful):
> >
> > I examined more closely the changes between v2 and v3 and I don't see
> > anything that would lead to this error either (I'm assuming v2 is
> > okay because this report wasn't generated for it). Looking at the
> > stack trace too, I'm not seeing anything that sticks out (eg this
> > looks like a memory mapping failure and bhash2 didn't modify mapping
> > or paging code).
>
> We chose commit 949d6b405e61 (net: add missing includes and forward
> declarations under net/) as base, which used to be the head of
> net-next/master branch then, and apply your v3 patches on top of it.
> So the test result is a comparison between 949d6b405e61 and v3.
>
> Refer to the bug info:
>
> [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
>
> The BUG happens in rsync, and it reminds me that we have some extra
> steps when running the test in our infrastructure. We will use some
> commands such as `wget` and `rsync` to transfer the test result to
> our server, but these steps are not included when reproducing locally.
>
> Then I come up with an idea that maybe the kernel can boot successfully,
> but the v3 patch may have some impacts on the command involving network
> operations.
>
> Could you please help to apply below hack on the latest version of
> lkp-tests, and retry to see if can reproduce the crash? It is just
> a meaningless `wget` command to involve network in local test and align
> with the steps in our testing environment.
I will try to repro this this week. I'll let you know what I find.
>
> diff --git a/lib/upload.sh b/lib/upload.sh
> index 257b498db..e8801736e 100755
> --- a/lib/upload.sh
> +++ b/lib/upload.sh
> @@ -181,7 +181,8 @@ upload_files()
> fi
> else
> # 9pfs, copy directly
> - upload_files_copy "$@"
> + wget 127.0.0.1
> return
> fi
> }
>
> After applying above hack, I've tried to run 20 times on base and v3 patch
> respectively. All runs of base are good, but there are 8 crash runs of v3.
>
> Reproducing steps:
>
> cd linux
> git remote add net-next https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git
> git fetch net-next master
> git checkout 949d6b405e61 # checkout to base
> git am <v3.patch>
>
> cp config-5.19.0-rc7-01443-g03d56978dd24 .config # config file is attached
> make ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> mkdir <mod-install-dir>
> make ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> cd <mod-install-dir>
> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
>
> git clone https://github.com/intel/lkp-tests.git
> cd lkp-tests
> # apply the hack mentioned above
> bin/lkp qemu -k <bzImage> -m <mod-install-dir>/modules.cgz job-script # job-script is attached in this email
>
> --
> Best Regards,
> Yujie
>
> >
> > I don't think this bug report is related to the bhash2 changes. But
> > please let me know if you disagree.
> >
> > Thanks,
> > Joanne
> >
> >>
> >>
> >> --
> >> 0-DAY CI Kernel Test Service
> >> https://01.org/lkp
> >>
> >>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [net] 03d56978dd: BUG:Bad_page_map_in_process
2022-08-09 16:52 ` Joanne Koong
(?)
@ 2022-08-12 19:01 ` Joanne Koong
-1 siblings, 0 replies; 21+ messages in thread
From: Joanne Koong @ 2022-08-12 18:57 UTC (permalink / raw)
To: dccp
On Tue, Aug 9, 2022 at 9:52 AM Joanne Koong <joannelkoong@gmail.com> wrote:
>
> On Fri, Aug 5, 2022 at 12:30 AM Yujie Liu <yujie.liu@intel.com> wrote:
> >
> > Hi Joanne,
> >
> > On 7/28/2022 07:41, Joanne Koong wrote:
> > > On Sun, Jul 24, 2022 at 7:05 AM kernel test robot <oliver.sang@intel.com> wrote:
> > >>
> > >>
> > >>
> > >> Greeting,
> > >>
> > >> FYI, we noticed the following commit (built with gcc-11):
> > >>
> > >> commit: 03d56978dd246147e151916e4dc72af7bc24d5c9 ("[PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address")
> > >> url: https://github.com/intel-lab-lkp/linux/commits/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
> > >> base: https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git 949d6b405e6160ae44baea39192d67b39cb7eeac
> > >> patch link: https://lore.kernel.org/netdev/20220722195406.1304948-2-joannelkoong@gmail.com
> > >>
> > >> in testcase: boot
> > >>
> > >> on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
> > >>
> > >> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
> > >>
> > >>
> > >>
> > >> If you fix the issue, kindly add following tag
> > >> Reported-by: kernel test robot <oliver.sang@intel.com>
> > >>
> > >>
> > >> [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
> > >> [ 103.873143][ T486] addr:00007f9fe52a2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f928adcb58 index:1a1
> > >> [ 103.875128][ T486] file:libcrypto.so.1.1 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> > >> [ 103.877339][ T486] CPU: 0 PID: 486 Comm: rsync Not tainted 5.19.0-rc7-01443-g03d56978dd24 #1
> > >> [ 103.879032][ T486] Call Trace:
> > >> [ 103.879742][ T486] <TASK>
> > >> [ 103.880329][ T486] ? simple_write_end+0x140/0x140
> > >> [ 103.881338][ T486] dump_stack_lvl+0x3b/0x53
> > >> [ 103.882274][ T486] ? __filemap_get_folio+0x780/0x780
> > >> [ 103.883270][ T486] print_bad_pte.cold+0x15b/0x1c5
> > >> [ 103.884202][ T486] vm_normal_page+0x65/0x140
> > >> [ 103.885062][ T486] zap_pte_range+0x23b/0x9c0
> > >> [ 103.885897][ T486] unmap_page_range+0x263/0x5c0
> > >> [ 103.886846][ T486] unmap_vmas+0x121/0x200
> > >> [ 103.887628][ T486] exit_mmap+0xb5/0x240
> > >> [ 103.888401][ T486] mmput+0x3b/0x140
> > >> [ 103.889134][ T486] exit_mm+0xff/0x180
> > >> [ 103.889877][ T486] do_exit+0x100/0x400
> > >> [ 103.890661][ T486] do_group_exit+0x3e/0x100
> > >> [ 103.891514][ T486] __x64_sys_exit_group+0x18/0x40
> > >> [ 103.892494][ T486] do_syscall_64+0x5d/0x80
> > >> [ 103.893294][ T486] ? do_user_addr_fault+0x257/0x6c0
> > >> [ 103.894238][ T486] ? lock_release+0x6e/0x100
> > >> [ 103.895171][ T486] ? up_read+0x12/0x40
> > >> [ 103.896036][ T486] ? exc_page_fault+0xb2/0x2c0
> > >> [ 103.897021][ T486] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> > >> [ 103.898243][ T486] RIP: 0033:0x7f9fe5007699
> > >> [ 103.899149][ T486] Code: Unable to access opcode bytes at RIP 0x7f9fe500766f.
> > >> [ 103.900511][ T486] RSP: 002b:00007fff7e32c3a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> > >> [ 103.902027][ T486] RAX: ffffffffffffffda RBX: 00007f9fe50fc610 RCX: 00007f9fe5007699
> > >> [ 103.903477][ T486] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> > >> [ 103.904943][ T486] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> > >> [ 103.906384][ T486] R10: 000000000000000b R11: 0000000000000246 R12: 00007f9fe50fc610
> > >> [ 103.907823][ T486] R13: 0000000000000001 R14: 00007f9fe50fcae8 R15: 0000000000000000
> > >> [ 103.909290][ T486] </TASK>
> > >> [ 103.910423][ T486] Disabling lock debugging due to kernel taint
> > >> [ 107.503093][ T508] BUG: Bad page map in process rsync pte:ffff92f93b7fe508 pmd:13aa1c067
> > >> [ 107.504948][ T508] addr:00007fced9aa2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f92891ab58 index:9a
> > >> [ 107.507070][ T508] file:libzstd.so.1.4.8 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> > >> [ 107.508825][ T508] CPU: 0 PID: 508 Comm: rsync Tainted: G B 5.19.0-rc7-01443-g03d56978dd24 #1
> > >> [ 107.510762][ T508] Call Trace:
> > >> [ 107.511458][ T508] <TASK>
> > >> [ 107.512058][ T508] ? simple_write_end+0x140/0x140
> > >> [ 107.513072][ T508] dump_stack_lvl+0x3b/0x53
> > >> [ 107.513990][ T508] ? __filemap_get_folio+0x780/0x780
> > >> [ 107.519166][ T508] print_bad_pte.cold+0x15b/0x1c5
> > >> [ 107.520032][ T508] vm_normal_page+0x65/0x140
> > >> [ 107.520802][ T508] zap_pte_range+0x23b/0x9c0
> > >> [ 107.521548][ T508] unmap_page_range+0x263/0x5c0
> > >> [ 107.522355][ T508] unmap_vmas+0x121/0x200
> > >> [ 107.523247][ T508] exit_mmap+0xb5/0x240
> > >> [ 107.524107][ T508] mmput+0x3b/0x140
> > >> [ 107.524908][ T508] exit_mm+0xff/0x180
> > >> [ 107.525716][ T508] do_exit+0x100/0x400
> > >> [ 107.526613][ T508] do_group_exit+0x3e/0x100
> > >> [ 107.527541][ T508] __x64_sys_exit_group+0x18/0x40
> > >> [ 107.528450][ T508] do_syscall_64+0x5d/0x80
> > >> [ 107.529368][ T508] ? up_read+0x12/0x40
> > >> [ 107.530228][ T508] ? do_user_addr_fault+0x257/0x6c0
> > >> [ 107.531121][ T508] ? rcu_read_lock_sched_held+0x5/0x40
> > >> [ 107.532046][ T508] ? exc_page_fault+0xb2/0x2c0
> > >> [ 107.532843][ T508] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> > >> [ 107.533866][ T508] RIP: 0033:0x7fced95ff699
> > >> [ 107.534781][ T508] Code: Unable to access opcode bytes at RIP 0x7fced95ff66f.
> > >> [ 107.536225][ T508] RSP: 002b:00007fff162474c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> > >> [ 107.537871][ T508] RAX: ffffffffffffffda RBX: 00007fced96f4610 RCX: 00007fced95ff699
> > >> [ 107.539506][ T508] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> > >> [ 107.541126][ T508] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> > >> [ 107.542743][ T508] R10: 000000000000000b R11: 0000000000000246 R12: 00007fced96f4610
> > >> [ 107.544310][ T508] R13: 0000000000000001 R14: 00007fced96f4ae8 R15: 0000000000000000
> > >> [ 107.545881][ T508] </TASK>
> > >>
> > >>
> > >>
> > >> To reproduce:
> > >>
> > >> # build kernel
> > >> cd linux
> > >> cp config-5.19.0-rc7-01443-g03d56978dd24 .config
> > >> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> > >> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> > >> cd <mod-install-dir>
> > >> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
> > >>
> > >>
> > >> git clone https://github.com/intel/lkp-tests.git
> > >> cd lkp-tests
> > >> bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
> > >>
> > >> # if come across any failure that blocks the test,
> > >> # please remove ~/.lkp and /lkp dir to run from a clean state.
> > >>
> > > I ran this in a loop ~20 times but I'm not able to repro the crash.
> > > This is a snippet of what I see (and I can also attach or paste the
> > > entire log if that would be helpful):
> > >
> > > I examined more closely the changes between v2 and v3 and I don't see
> > > anything that would lead to this error either (I'm assuming v2 is
> > > okay because this report wasn't generated for it). Looking at the
> > > stack trace too, I'm not seeing anything that sticks out (eg this
> > > looks like a memory mapping failure and bhash2 didn't modify mapping
> > > or paging code).
> >
> > We chose commit 949d6b405e61 (net: add missing includes and forward
> > declarations under net/) as base, which used to be the head of
> > net-next/master branch then, and apply your v3 patches on top of it.
> > So the test result is a comparison between 949d6b405e61 and v3.
> >
> > Refer to the bug info:
> >
> > [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
> >
> > The BUG happens in rsync, and it reminds me that we have some extra
> > steps when running the test in our infrastructure. We will use some
> > commands such as `wget` and `rsync` to transfer the test result to
> > our server, but these steps are not included when reproducing locally.
> >
> > Then I come up with an idea that maybe the kernel can boot successfully,
> > but the v3 patch may have some impacts on the command involving network
> > operations.
> >
> > Could you please help to apply below hack on the latest version of
> > lkp-tests, and retry to see if can reproduce the crash? It is just
> > a meaningless `wget` command to involve network in local test and align
> > with the steps in our testing environment.
>
> I will try to repro this this week. I'll let you know what I find.
I applied the wget change you suggested and was able to reproduce the crash.
This is happening because in the case where there is a connect() call
on address 0 on an unbound socket, the socket gets added to the bind
bucket twice. The first happens in inet_bhash2_update_saddr() and the
second happens when __inet_hash_connect() calls inet_bind_hash(). The
fix is to update the bhash2 table only if the socket is already bound.
I will submit v4 with this fix added. There is already a selftest
("sk_connect_zero_addr") in the 3rd patch that simulates this case but
it doesn't trigger the bad page table entry state when unmapping.
Thanks for reporting.
>
> >
> > diff --git a/lib/upload.sh b/lib/upload.sh
> > index 257b498db..e8801736e 100755
> > --- a/lib/upload.sh
> > +++ b/lib/upload.sh
> > @@ -181,7 +181,8 @@ upload_files()
> > fi
> > else
> > # 9pfs, copy directly
> > - upload_files_copy "$@"
> > + wget 127.0.0.1
> > return
> > fi
> > }
> >
> > After applying above hack, I've tried to run 20 times on base and v3 patch
> > respectively. All runs of base are good, but there are 8 crash runs of v3.
> >
> > Reproducing steps:
> >
> > cd linux
> > git remote add net-next https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git
> > git fetch net-next master
> > git checkout 949d6b405e61 # checkout to base
> > git am <v3.patch>
> >
> > cp config-5.19.0-rc7-01443-g03d56978dd24 .config # config file is attached
> > make ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> > mkdir <mod-install-dir>
> > make ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> > cd <mod-install-dir>
> > find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
> >
> > git clone https://github.com/intel/lkp-tests.git
> > cd lkp-tests
> > # apply the hack mentioned above
> > bin/lkp qemu -k <bzImage> -m <mod-install-dir>/modules.cgz job-script # job-script is attached in this email
> >
> > --
> > Best Regards,
> > Yujie
> >
> > >
> > > I don't think this bug report is related to the bhash2 changes. But
> > > please let me know if you disagree.
> > >
> > > Thanks,
> > > Joanne
> > >
> > >>
> > >>
> > >> --
> > >> 0-DAY CI Kernel Test Service
> > >> https://01.org/lkp
> > >>
> > >>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [net] 03d56978dd: BUG:Bad_page_map_in_process
@ 2022-08-12 19:01 ` Joanne Koong
0 siblings, 0 replies; 21+ messages in thread
From: Joanne Koong @ 2022-08-12 19:01 UTC (permalink / raw)
To: Yujie Liu
Cc: 0day robot, LKML, netdev, dccp, lkp, Paolo Abeni, Eric Dumazet,
Jakub Kicinski, Martin KaFai Lau, David Miller,
kernel test robot
On Tue, Aug 9, 2022 at 9:52 AM Joanne Koong <joannelkoong@gmail.com> wrote:
>
> On Fri, Aug 5, 2022 at 12:30 AM Yujie Liu <yujie.liu@intel.com> wrote:
> >
> > Hi Joanne,
> >
> > On 7/28/2022 07:41, Joanne Koong wrote:
> > > On Sun, Jul 24, 2022 at 7:05 AM kernel test robot <oliver.sang@intel.com> wrote:
> > >>
> > >>
> > >>
> > >> Greeting,
> > >>
> > >> FYI, we noticed the following commit (built with gcc-11):
> > >>
> > >> commit: 03d56978dd246147e151916e4dc72af7bc24d5c9 ("[PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address")
> > >> url: https://github.com/intel-lab-lkp/linux/commits/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
> > >> base: https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git 949d6b405e6160ae44baea39192d67b39cb7eeac
> > >> patch link: https://lore.kernel.org/netdev/20220722195406.1304948-2-joannelkoong@gmail.com
> > >>
> > >> in testcase: boot
> > >>
> > >> on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
> > >>
> > >> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
> > >>
> > >>
> > >>
> > >> If you fix the issue, kindly add following tag
> > >> Reported-by: kernel test robot <oliver.sang@intel.com>
> > >>
> > >>
> > >> [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
> > >> [ 103.873143][ T486] addr:00007f9fe52a2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f928adcb58 index:1a1
> > >> [ 103.875128][ T486] file:libcrypto.so.1.1 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> > >> [ 103.877339][ T486] CPU: 0 PID: 486 Comm: rsync Not tainted 5.19.0-rc7-01443-g03d56978dd24 #1
> > >> [ 103.879032][ T486] Call Trace:
> > >> [ 103.879742][ T486] <TASK>
> > >> [ 103.880329][ T486] ? simple_write_end+0x140/0x140
> > >> [ 103.881338][ T486] dump_stack_lvl+0x3b/0x53
> > >> [ 103.882274][ T486] ? __filemap_get_folio+0x780/0x780
> > >> [ 103.883270][ T486] print_bad_pte.cold+0x15b/0x1c5
> > >> [ 103.884202][ T486] vm_normal_page+0x65/0x140
> > >> [ 103.885062][ T486] zap_pte_range+0x23b/0x9c0
> > >> [ 103.885897][ T486] unmap_page_range+0x263/0x5c0
> > >> [ 103.886846][ T486] unmap_vmas+0x121/0x200
> > >> [ 103.887628][ T486] exit_mmap+0xb5/0x240
> > >> [ 103.888401][ T486] mmput+0x3b/0x140
> > >> [ 103.889134][ T486] exit_mm+0xff/0x180
> > >> [ 103.889877][ T486] do_exit+0x100/0x400
> > >> [ 103.890661][ T486] do_group_exit+0x3e/0x100
> > >> [ 103.891514][ T486] __x64_sys_exit_group+0x18/0x40
> > >> [ 103.892494][ T486] do_syscall_64+0x5d/0x80
> > >> [ 103.893294][ T486] ? do_user_addr_fault+0x257/0x6c0
> > >> [ 103.894238][ T486] ? lock_release+0x6e/0x100
> > >> [ 103.895171][ T486] ? up_read+0x12/0x40
> > >> [ 103.896036][ T486] ? exc_page_fault+0xb2/0x2c0
> > >> [ 103.897021][ T486] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> > >> [ 103.898243][ T486] RIP: 0033:0x7f9fe5007699
> > >> [ 103.899149][ T486] Code: Unable to access opcode bytes at RIP 0x7f9fe500766f.
> > >> [ 103.900511][ T486] RSP: 002b:00007fff7e32c3a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> > >> [ 103.902027][ T486] RAX: ffffffffffffffda RBX: 00007f9fe50fc610 RCX: 00007f9fe5007699
> > >> [ 103.903477][ T486] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> > >> [ 103.904943][ T486] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> > >> [ 103.906384][ T486] R10: 000000000000000b R11: 0000000000000246 R12: 00007f9fe50fc610
> > >> [ 103.907823][ T486] R13: 0000000000000001 R14: 00007f9fe50fcae8 R15: 0000000000000000
> > >> [ 103.909290][ T486] </TASK>
> > >> [ 103.910423][ T486] Disabling lock debugging due to kernel taint
> > >> [ 107.503093][ T508] BUG: Bad page map in process rsync pte:ffff92f93b7fe508 pmd:13aa1c067
> > >> [ 107.504948][ T508] addr:00007fced9aa2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f92891ab58 index:9a
> > >> [ 107.507070][ T508] file:libzstd.so.1.4.8 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> > >> [ 107.508825][ T508] CPU: 0 PID: 508 Comm: rsync Tainted: G B 5.19.0-rc7-01443-g03d56978dd24 #1
> > >> [ 107.510762][ T508] Call Trace:
> > >> [ 107.511458][ T508] <TASK>
> > >> [ 107.512058][ T508] ? simple_write_end+0x140/0x140
> > >> [ 107.513072][ T508] dump_stack_lvl+0x3b/0x53
> > >> [ 107.513990][ T508] ? __filemap_get_folio+0x780/0x780
> > >> [ 107.519166][ T508] print_bad_pte.cold+0x15b/0x1c5
> > >> [ 107.520032][ T508] vm_normal_page+0x65/0x140
> > >> [ 107.520802][ T508] zap_pte_range+0x23b/0x9c0
> > >> [ 107.521548][ T508] unmap_page_range+0x263/0x5c0
> > >> [ 107.522355][ T508] unmap_vmas+0x121/0x200
> > >> [ 107.523247][ T508] exit_mmap+0xb5/0x240
> > >> [ 107.524107][ T508] mmput+0x3b/0x140
> > >> [ 107.524908][ T508] exit_mm+0xff/0x180
> > >> [ 107.525716][ T508] do_exit+0x100/0x400
> > >> [ 107.526613][ T508] do_group_exit+0x3e/0x100
> > >> [ 107.527541][ T508] __x64_sys_exit_group+0x18/0x40
> > >> [ 107.528450][ T508] do_syscall_64+0x5d/0x80
> > >> [ 107.529368][ T508] ? up_read+0x12/0x40
> > >> [ 107.530228][ T508] ? do_user_addr_fault+0x257/0x6c0
> > >> [ 107.531121][ T508] ? rcu_read_lock_sched_held+0x5/0x40
> > >> [ 107.532046][ T508] ? exc_page_fault+0xb2/0x2c0
> > >> [ 107.532843][ T508] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> > >> [ 107.533866][ T508] RIP: 0033:0x7fced95ff699
> > >> [ 107.534781][ T508] Code: Unable to access opcode bytes at RIP 0x7fced95ff66f.
> > >> [ 107.536225][ T508] RSP: 002b:00007fff162474c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> > >> [ 107.537871][ T508] RAX: ffffffffffffffda RBX: 00007fced96f4610 RCX: 00007fced95ff699
> > >> [ 107.539506][ T508] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> > >> [ 107.541126][ T508] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> > >> [ 107.542743][ T508] R10: 000000000000000b R11: 0000000000000246 R12: 00007fced96f4610
> > >> [ 107.544310][ T508] R13: 0000000000000001 R14: 00007fced96f4ae8 R15: 0000000000000000
> > >> [ 107.545881][ T508] </TASK>
> > >>
> > >>
> > >>
> > >> To reproduce:
> > >>
> > >> # build kernel
> > >> cd linux
> > >> cp config-5.19.0-rc7-01443-g03d56978dd24 .config
> > >> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> > >> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> > >> cd <mod-install-dir>
> > >> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
> > >>
> > >>
> > >> git clone https://github.com/intel/lkp-tests.git
> > >> cd lkp-tests
> > >> bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
> > >>
> > >> # if come across any failure that blocks the test,
> > >> # please remove ~/.lkp and /lkp dir to run from a clean state.
> > >>
> > > I ran this in a loop ~20 times but I'm not able to repro the crash.
> > > This is a snippet of what I see (and I can also attach or paste the
> > > entire log if that would be helpful):
> > >
> > > I examined more closely the changes between v2 and v3 and I don't see
> > > anything that would lead to this error either (I'm assuming v2 is
> > > okay because this report wasn't generated for it). Looking at the
> > > stack trace too, I'm not seeing anything that sticks out (eg this
> > > looks like a memory mapping failure and bhash2 didn't modify mapping
> > > or paging code).
> >
> > We chose commit 949d6b405e61 (net: add missing includes and forward
> > declarations under net/) as base, which used to be the head of
> > net-next/master branch then, and apply your v3 patches on top of it.
> > So the test result is a comparison between 949d6b405e61 and v3.
> >
> > Refer to the bug info:
> >
> > [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
> >
> > The BUG happens in rsync, and it reminds me that we have some extra
> > steps when running the test in our infrastructure. We will use some
> > commands such as `wget` and `rsync` to transfer the test result to
> > our server, but these steps are not included when reproducing locally.
> >
> > Then I come up with an idea that maybe the kernel can boot successfully,
> > but the v3 patch may have some impacts on the command involving network
> > operations.
> >
> > Could you please help to apply below hack on the latest version of
> > lkp-tests, and retry to see if can reproduce the crash? It is just
> > a meaningless `wget` command to involve network in local test and align
> > with the steps in our testing environment.
>
> I will try to repro this this week. I'll let you know what I find.
I applied the wget change you suggested and was able to reproduce the crash.
This is happening because in the case where there is a connect() call
on address 0 on an unbound socket, the socket gets added to the bind
bucket twice. The first happens in inet_bhash2_update_saddr() and the
second happens when __inet_hash_connect() calls inet_bind_hash(). The
fix is to update the bhash2 table only if the socket is already bound.
I will submit v4 with this fix added. There is already a selftest
("sk_connect_zero_addr") in the 3rd patch that simulates this case but
it doesn't trigger the bad page table entry state when unmapping.
Thanks for reporting.
>
> >
> > diff --git a/lib/upload.sh b/lib/upload.sh
> > index 257b498db..e8801736e 100755
> > --- a/lib/upload.sh
> > +++ b/lib/upload.sh
> > @@ -181,7 +181,8 @@ upload_files()
> > fi
> > else
> > # 9pfs, copy directly
> > - upload_files_copy "$@"
> > + wget 127.0.0.1
> > return
> > fi
> > }
> >
> > After applying above hack, I've tried to run 20 times on base and v3 patch
> > respectively. All runs of base are good, but there are 8 crash runs of v3.
> >
> > Reproducing steps:
> >
> > cd linux
> > git remote add net-next https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git
> > git fetch net-next master
> > git checkout 949d6b405e61 # checkout to base
> > git am <v3.patch>
> >
> > cp config-5.19.0-rc7-01443-g03d56978dd24 .config # config file is attached
> > make ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> > mkdir <mod-install-dir>
> > make ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> > cd <mod-install-dir>
> > find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
> >
> > git clone https://github.com/intel/lkp-tests.git
> > cd lkp-tests
> > # apply the hack mentioned above
> > bin/lkp qemu -k <bzImage> -m <mod-install-dir>/modules.cgz job-script # job-script is attached in this email
> >
> > --
> > Best Regards,
> > Yujie
> >
> > >
> > > I don't think this bug report is related to the bhash2 changes. But
> > > please let me know if you disagree.
> > >
> > > Thanks,
> > > Joanne
> > >
> > >>
> > >>
> > >> --
> > >> 0-DAY CI Kernel Test Service
> > >> https://01.org/lkp
> > >>
> > >>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [net] 03d56978dd: BUG:Bad_page_map_in_process
@ 2022-08-12 19:01 ` Joanne Koong
0 siblings, 0 replies; 21+ messages in thread
From: Joanne Koong @ 2022-08-12 19:01 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 11649 bytes --]
On Tue, Aug 9, 2022 at 9:52 AM Joanne Koong <joannelkoong@gmail.com> wrote:
>
> On Fri, Aug 5, 2022 at 12:30 AM Yujie Liu <yujie.liu@intel.com> wrote:
> >
> > Hi Joanne,
> >
> > On 7/28/2022 07:41, Joanne Koong wrote:
> > > On Sun, Jul 24, 2022 at 7:05 AM kernel test robot <oliver.sang@intel.com> wrote:
> > >>
> > >>
> > >>
> > >> Greeting,
> > >>
> > >> FYI, we noticed the following commit (built with gcc-11):
> > >>
> > >> commit: 03d56978dd246147e151916e4dc72af7bc24d5c9 ("[PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address")
> > >> url: https://github.com/intel-lab-lkp/linux/commits/Joanne-Koong/Add-a-second-bind-table-hashed-by-port-address/20220723-035903
> > >> base: https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git 949d6b405e6160ae44baea39192d67b39cb7eeac
> > >> patch link: https://lore.kernel.org/netdev/20220722195406.1304948-2-joannelkoong(a)gmail.com
> > >>
> > >> in testcase: boot
> > >>
> > >> on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G
> > >>
> > >> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
> > >>
> > >>
> > >>
> > >> If you fix the issue, kindly add following tag
> > >> Reported-by: kernel test robot <oliver.sang@intel.com>
> > >>
> > >>
> > >> [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
> > >> [ 103.873143][ T486] addr:00007f9fe52a2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f928adcb58 index:1a1
> > >> [ 103.875128][ T486] file:libcrypto.so.1.1 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> > >> [ 103.877339][ T486] CPU: 0 PID: 486 Comm: rsync Not tainted 5.19.0-rc7-01443-g03d56978dd24 #1
> > >> [ 103.879032][ T486] Call Trace:
> > >> [ 103.879742][ T486] <TASK>
> > >> [ 103.880329][ T486] ? simple_write_end+0x140/0x140
> > >> [ 103.881338][ T486] dump_stack_lvl+0x3b/0x53
> > >> [ 103.882274][ T486] ? __filemap_get_folio+0x780/0x780
> > >> [ 103.883270][ T486] print_bad_pte.cold+0x15b/0x1c5
> > >> [ 103.884202][ T486] vm_normal_page+0x65/0x140
> > >> [ 103.885062][ T486] zap_pte_range+0x23b/0x9c0
> > >> [ 103.885897][ T486] unmap_page_range+0x263/0x5c0
> > >> [ 103.886846][ T486] unmap_vmas+0x121/0x200
> > >> [ 103.887628][ T486] exit_mmap+0xb5/0x240
> > >> [ 103.888401][ T486] mmput+0x3b/0x140
> > >> [ 103.889134][ T486] exit_mm+0xff/0x180
> > >> [ 103.889877][ T486] do_exit+0x100/0x400
> > >> [ 103.890661][ T486] do_group_exit+0x3e/0x100
> > >> [ 103.891514][ T486] __x64_sys_exit_group+0x18/0x40
> > >> [ 103.892494][ T486] do_syscall_64+0x5d/0x80
> > >> [ 103.893294][ T486] ? do_user_addr_fault+0x257/0x6c0
> > >> [ 103.894238][ T486] ? lock_release+0x6e/0x100
> > >> [ 103.895171][ T486] ? up_read+0x12/0x40
> > >> [ 103.896036][ T486] ? exc_page_fault+0xb2/0x2c0
> > >> [ 103.897021][ T486] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> > >> [ 103.898243][ T486] RIP: 0033:0x7f9fe5007699
> > >> [ 103.899149][ T486] Code: Unable to access opcode bytes at RIP 0x7f9fe500766f.
> > >> [ 103.900511][ T486] RSP: 002b:00007fff7e32c3a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> > >> [ 103.902027][ T486] RAX: ffffffffffffffda RBX: 00007f9fe50fc610 RCX: 00007f9fe5007699
> > >> [ 103.903477][ T486] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> > >> [ 103.904943][ T486] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> > >> [ 103.906384][ T486] R10: 000000000000000b R11: 0000000000000246 R12: 00007f9fe50fc610
> > >> [ 103.907823][ T486] R13: 0000000000000001 R14: 00007f9fe50fcae8 R15: 0000000000000000
> > >> [ 103.909290][ T486] </TASK>
> > >> [ 103.910423][ T486] Disabling lock debugging due to kernel taint
> > >> [ 107.503093][ T508] BUG: Bad page map in process rsync pte:ffff92f93b7fe508 pmd:13aa1c067
> > >> [ 107.504948][ T508] addr:00007fced9aa2000 vm_flags:00000075 anon_vma:0000000000000000 mapping:ffff92f92891ab58 index:9a
> > >> [ 107.507070][ T508] file:libzstd.so.1.4.8 fault:filemap_fault mmap:generic_file_mmap read_folio:simple_read_folio
> > >> [ 107.508825][ T508] CPU: 0 PID: 508 Comm: rsync Tainted: G B 5.19.0-rc7-01443-g03d56978dd24 #1
> > >> [ 107.510762][ T508] Call Trace:
> > >> [ 107.511458][ T508] <TASK>
> > >> [ 107.512058][ T508] ? simple_write_end+0x140/0x140
> > >> [ 107.513072][ T508] dump_stack_lvl+0x3b/0x53
> > >> [ 107.513990][ T508] ? __filemap_get_folio+0x780/0x780
> > >> [ 107.519166][ T508] print_bad_pte.cold+0x15b/0x1c5
> > >> [ 107.520032][ T508] vm_normal_page+0x65/0x140
> > >> [ 107.520802][ T508] zap_pte_range+0x23b/0x9c0
> > >> [ 107.521548][ T508] unmap_page_range+0x263/0x5c0
> > >> [ 107.522355][ T508] unmap_vmas+0x121/0x200
> > >> [ 107.523247][ T508] exit_mmap+0xb5/0x240
> > >> [ 107.524107][ T508] mmput+0x3b/0x140
> > >> [ 107.524908][ T508] exit_mm+0xff/0x180
> > >> [ 107.525716][ T508] do_exit+0x100/0x400
> > >> [ 107.526613][ T508] do_group_exit+0x3e/0x100
> > >> [ 107.527541][ T508] __x64_sys_exit_group+0x18/0x40
> > >> [ 107.528450][ T508] do_syscall_64+0x5d/0x80
> > >> [ 107.529368][ T508] ? up_read+0x12/0x40
> > >> [ 107.530228][ T508] ? do_user_addr_fault+0x257/0x6c0
> > >> [ 107.531121][ T508] ? rcu_read_lock_sched_held+0x5/0x40
> > >> [ 107.532046][ T508] ? exc_page_fault+0xb2/0x2c0
> > >> [ 107.532843][ T508] entry_SYSCALL_64_after_hwframe+0x5d/0xc7
> > >> [ 107.533866][ T508] RIP: 0033:0x7fced95ff699
> > >> [ 107.534781][ T508] Code: Unable to access opcode bytes at RIP 0x7fced95ff66f.
> > >> [ 107.536225][ T508] RSP: 002b:00007fff162474c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
> > >> [ 107.537871][ T508] RAX: ffffffffffffffda RBX: 00007fced96f4610 RCX: 00007fced95ff699
> > >> [ 107.539506][ T508] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
> > >> [ 107.541126][ T508] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 0000000000000001
> > >> [ 107.542743][ T508] R10: 000000000000000b R11: 0000000000000246 R12: 00007fced96f4610
> > >> [ 107.544310][ T508] R13: 0000000000000001 R14: 00007fced96f4ae8 R15: 0000000000000000
> > >> [ 107.545881][ T508] </TASK>
> > >>
> > >>
> > >>
> > >> To reproduce:
> > >>
> > >> # build kernel
> > >> cd linux
> > >> cp config-5.19.0-rc7-01443-g03d56978dd24 .config
> > >> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> > >> make HOSTCC=gcc-11 CC=gcc-11 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> > >> cd <mod-install-dir>
> > >> find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
> > >>
> > >>
> > >> git clone https://github.com/intel/lkp-tests.git
> > >> cd lkp-tests
> > >> bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email
> > >>
> > >> # if come across any failure that blocks the test,
> > >> # please remove ~/.lkp and /lkp dir to run from a clean state.
> > >>
> > > I ran this in a loop ~20 times but I'm not able to repro the crash.
> > > This is a snippet of what I see (and I can also attach or paste the
> > > entire log if that would be helpful):
> > >
> > > I examined more closely the changes between v2 and v3 and I don't see
> > > anything that would lead to this error either (I'm assuming v2 is
> > > okay because this report wasn't generated for it). Looking at the
> > > stack trace too, I'm not seeing anything that sticks out (eg this
> > > looks like a memory mapping failure and bhash2 didn't modify mapping
> > > or paging code).
> >
> > We chose commit 949d6b405e61 (net: add missing includes and forward
> > declarations under net/) as base, which used to be the head of
> > net-next/master branch then, and apply your v3 patches on top of it.
> > So the test result is a comparison between 949d6b405e61 and v3.
> >
> > Refer to the bug info:
> >
> > [ 103.871133][ T486] BUG: Bad page map in process rsync pte:ffff92f93b759508 pmd:13fc1e067
> >
> > The BUG happens in rsync, and it reminds me that we have some extra
> > steps when running the test in our infrastructure. We will use some
> > commands such as `wget` and `rsync` to transfer the test result to
> > our server, but these steps are not included when reproducing locally.
> >
> > Then I come up with an idea that maybe the kernel can boot successfully,
> > but the v3 patch may have some impacts on the command involving network
> > operations.
> >
> > Could you please help to apply below hack on the latest version of
> > lkp-tests, and retry to see if can reproduce the crash? It is just
> > a meaningless `wget` command to involve network in local test and align
> > with the steps in our testing environment.
>
> I will try to repro this this week. I'll let you know what I find.
I applied the wget change you suggested and was able to reproduce the crash.
This is happening because in the case where there is a connect() call
on address 0 on an unbound socket, the socket gets added to the bind
bucket twice. The first happens in inet_bhash2_update_saddr() and the
second happens when __inet_hash_connect() calls inet_bind_hash(). The
fix is to update the bhash2 table only if the socket is already bound.
I will submit v4 with this fix added. There is already a selftest
("sk_connect_zero_addr") in the 3rd patch that simulates this case but
it doesn't trigger the bad page table entry state when unmapping.
Thanks for reporting.
>
> >
> > diff --git a/lib/upload.sh b/lib/upload.sh
> > index 257b498db..e8801736e 100755
> > --- a/lib/upload.sh
> > +++ b/lib/upload.sh
> > @@ -181,7 +181,8 @@ upload_files()
> > fi
> > else
> > # 9pfs, copy directly
> > - upload_files_copy "$@"
> > + wget 127.0.0.1
> > return
> > fi
> > }
> >
> > After applying above hack, I've tried to run 20 times on base and v3 patch
> > respectively. All runs of base are good, but there are 8 crash runs of v3.
> >
> > Reproducing steps:
> >
> > cd linux
> > git remote add net-next https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git
> > git fetch net-next master
> > git checkout 949d6b405e61 # checkout to base
> > git am <v3.patch>
> >
> > cp config-5.19.0-rc7-01443-g03d56978dd24 .config # config file is attached
> > make ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
> > mkdir <mod-install-dir>
> > make ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
> > cd <mod-install-dir>
> > find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz
> >
> > git clone https://github.com/intel/lkp-tests.git
> > cd lkp-tests
> > # apply the hack mentioned above
> > bin/lkp qemu -k <bzImage> -m <mod-install-dir>/modules.cgz job-script # job-script is attached in this email
> >
> > --
> > Best Regards,
> > Yujie
> >
> > >
> > > I don't think this bug report is related to the bhash2 changes. But
> > > please let me know if you disagree.
> > >
> > > Thanks,
> > > Joanne
> > >
> > >>
> > >>
> > >> --
> > >> 0-DAY CI Kernel Test Service
> > >> https://01.org/lkp
> > >>
> > >>
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2022-08-12 19:02 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-07-22 19:54 [PATCH net-next v3 0/3] Add a second bind table hashed by port + address Joanne Koong
2022-07-22 19:54 ` [PATCH net-next v3 1/3] net: Add a bhash2 " Joanne Koong
2022-07-24 14:04 ` [net] 03d56978dd: BUG:Bad_page_map_in_process kernel test robot
2022-07-25 16:58 ` kernel test robot
2022-07-27 23:41 ` Joanne Koong
2022-07-27 23:41 ` Joanne Koong
2022-07-27 23:41 ` Joanne Koong
2022-07-29 5:45 ` Oliver Sang
2022-07-29 5:45 ` Oliver Sang
2022-07-29 5:45 ` Oliver Sang
2022-08-05 7:29 ` Yujie Liu
2022-08-05 7:29 ` Yujie Liu
2022-08-09 16:52 ` Joanne Koong
2022-08-09 16:52 ` Joanne Koong
2022-08-09 16:52 ` Joanne Koong
2022-08-12 18:57 ` Joanne Koong
2022-08-12 19:01 ` Joanne Koong
2022-08-12 19:01 ` Joanne Koong
2022-07-31 18:46 ` [PATCH net-next v3 1/3] net: Add a bhash2 table hashed by port + address kernel test robot
2022-07-22 19:54 ` [PATCH net-next v3 2/3] selftests/net: Add test for timing a bind request to a port with a populated bhash entry Joanne Koong
2022-07-22 19:54 ` [PATCH net-next v3 3/3] selftests/net: Add sk_bind_sendto_listen and sk_connect_zero_addr Joanne Koong
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.