All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
@ 2022-08-03 17:54 ` William Zhang
  0 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Rob Herring,
	Krzysztof Kozlowski,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	open list, Philipp Zabel, open list:I2C SUBSYSTEM HOST DRIVERS,
	open list:MEMORY TECHNOLOGY DEVICES (MTD),
	open list:NETWORKING DRIVERS,
	open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS,
	open list:GENERIC PHY FRAMEWORK, open list:PIN CONTROL SUBSYSTEM,
	open list:BROADCOM BMIPS MIPS ARCHITECTURE,
	open list:SERIAL DRIVERS, open list:WATCHDOG DEVICE DRIVERS,
	Catalin Marinas, Will Deacon

[-- Attachment #1: Type: text/plain, Size: 3276 bytes --]

BCM4908 is one of the Broadcom Broadband origin WLAN Router/Access
Pointer SoCs. It was originally added by Rafał before Broadcom started
to upstream the support for broadband SoCs. All other ARM based Broadcom
Broadband SoCs are now supported under arch ARCH_BCMBCA. This patch
series migrate the BCM4908 support to ARCH_BCMBCA.

Changes in v3:
- Add Reviewed-by tag
- Add Acked-by tags
- Remove the dts break warning from commit message

Changes in v2:
- Add Acked-by tag
- Improve commit message with more details
- Insert the 4908 generic compatible string in alphabetical order

William Zhang (9):
  dt-bindings: arm64: bcmbca: Merge BCM4908 into BCMBCA
  dt-bindings: arm64: bcmbca: Update BCM4908 description
  arm64: dts: bcmbca: update BCM4908 board dts files
  arm64: dts: Move BCM4908 dts to bcmbca folder
  arm64: dts: Add BCM4908 generic board dts
  arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA
  MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry
  arm64: defconfig: remove BCM4908

 .../bindings/arm/bcm/brcm,bcm4908.yaml        | 42 -------------------
 .../bindings/arm/bcm/brcm,bcmbca.yaml         | 25 +++++++++++
 MAINTAINERS                                   |  1 +
 arch/arm64/Kconfig.platforms                  | 10 +----
 arch/arm64/boot/dts/broadcom/Makefile         |  1 -
 arch/arm64/boot/dts/broadcom/bcm4908/Makefile |  5 ---
 arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |  5 +++
 .../bcm4906-netgear-r8000p.dts                |  2 +-
 .../bcm4906-tplink-archer-c2300-v1.dts        |  2 +-
 .../broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi |  0
 .../bcm4908-asus-gt-ac5300.dts                |  2 +-
 .../bcm4908-netgear-raxe500.dts               |  2 +-
 .../broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi |  0
 .../boot/dts/broadcom/bcmbca/bcm94908.dts     | 30 +++++++++++++
 arch/arm64/configs/defconfig                  |  1 -
 drivers/i2c/busses/Kconfig                    |  4 +-
 drivers/mtd/parsers/Kconfig                   |  6 +--
 drivers/net/ethernet/broadcom/Kconfig         |  4 +-
 drivers/pci/controller/Kconfig                |  2 +-
 drivers/phy/broadcom/Kconfig                  |  4 +-
 drivers/pinctrl/bcm/Kconfig                   |  4 +-
 drivers/reset/Kconfig                         |  2 +-
 drivers/soc/bcm/bcm63xx/Kconfig               |  4 +-
 drivers/tty/serial/Kconfig                    |  4 +-
 drivers/watchdog/Kconfig                      |  2 +-
 25 files changed, 84 insertions(+), 80 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
 delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts (96%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts (99%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi (100%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts (97%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts (89%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi (100%)
 create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts

-- 
2.34.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

^ permalink raw reply	[flat|nested] 44+ messages in thread
* [PATCH v3 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
@ 2022-08-03 17:54 ` William Zhang
  0 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Rob Herring,
	Krzysztof Kozlowski,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	open list, Philipp Zabel, open list:I2C SUBSYSTEM HOST DRIVERS,
	open list:MEMORY TECHNOLOGY DEVICES (MTD),
	open list:NETWORKING DRIVERS,
	open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS,
	open list:GENERIC PHY FRAMEWORK, open list:PIN CONTROL SUBSYSTEM,
	open list:BROADCOM BMIPS MIPS ARCHITECTURE,
	open list:SERIAL DRIVERS, open list:WATCHDOG DEVICE DRIVERS,
	Catalin Marinas, Will Deacon


[-- Attachment #1.1: Type: text/plain, Size: 3276 bytes --]

BCM4908 is one of the Broadcom Broadband origin WLAN Router/Access
Pointer SoCs. It was originally added by Rafał before Broadcom started
to upstream the support for broadband SoCs. All other ARM based Broadcom
Broadband SoCs are now supported under arch ARCH_BCMBCA. This patch
series migrate the BCM4908 support to ARCH_BCMBCA.

Changes in v3:
- Add Reviewed-by tag
- Add Acked-by tags
- Remove the dts break warning from commit message

Changes in v2:
- Add Acked-by tag
- Improve commit message with more details
- Insert the 4908 generic compatible string in alphabetical order

William Zhang (9):
  dt-bindings: arm64: bcmbca: Merge BCM4908 into BCMBCA
  dt-bindings: arm64: bcmbca: Update BCM4908 description
  arm64: dts: bcmbca: update BCM4908 board dts files
  arm64: dts: Move BCM4908 dts to bcmbca folder
  arm64: dts: Add BCM4908 generic board dts
  arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA
  MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry
  arm64: defconfig: remove BCM4908

 .../bindings/arm/bcm/brcm,bcm4908.yaml        | 42 -------------------
 .../bindings/arm/bcm/brcm,bcmbca.yaml         | 25 +++++++++++
 MAINTAINERS                                   |  1 +
 arch/arm64/Kconfig.platforms                  | 10 +----
 arch/arm64/boot/dts/broadcom/Makefile         |  1 -
 arch/arm64/boot/dts/broadcom/bcm4908/Makefile |  5 ---
 arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |  5 +++
 .../bcm4906-netgear-r8000p.dts                |  2 +-
 .../bcm4906-tplink-archer-c2300-v1.dts        |  2 +-
 .../broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi |  0
 .../bcm4908-asus-gt-ac5300.dts                |  2 +-
 .../bcm4908-netgear-raxe500.dts               |  2 +-
 .../broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi |  0
 .../boot/dts/broadcom/bcmbca/bcm94908.dts     | 30 +++++++++++++
 arch/arm64/configs/defconfig                  |  1 -
 drivers/i2c/busses/Kconfig                    |  4 +-
 drivers/mtd/parsers/Kconfig                   |  6 +--
 drivers/net/ethernet/broadcom/Kconfig         |  4 +-
 drivers/pci/controller/Kconfig                |  2 +-
 drivers/phy/broadcom/Kconfig                  |  4 +-
 drivers/pinctrl/bcm/Kconfig                   |  4 +-
 drivers/reset/Kconfig                         |  2 +-
 drivers/soc/bcm/bcm63xx/Kconfig               |  4 +-
 drivers/tty/serial/Kconfig                    |  4 +-
 drivers/watchdog/Kconfig                      |  2 +-
 25 files changed, 84 insertions(+), 80 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
 delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts (96%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts (99%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi (100%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts (97%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts (89%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi (100%)
 create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts

-- 
2.34.1


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

[-- Attachment #2: Type: text/plain, Size: 112 bytes --]

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

^ permalink raw reply	[flat|nested] 44+ messages in thread
* [PATCH v3 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
@ 2022-08-03 17:54 ` William Zhang
  0 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Rob Herring,
	Krzysztof Kozlowski,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	open list, Philipp Zabel, open list:I2C SUBSYSTEM HOST DRIVERS,
	open list:MEMORY TECHNOLOGY DEVICES (MTD),
	open list:NETWORKING DRIVERS,
	open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS,
	open list:GENERIC PHY FRAMEWORK, open list:PIN CONTROL SUBSYSTEM,
	open list:BROADCOM BMIPS MIPS ARCHITECTURE,
	open list:SERIAL DRIVERS, open list:WATCHDOG DEVICE DRIVERS,
	Catalin Marinas, Will Deacon


[-- Attachment #1.1: Type: text/plain, Size: 3276 bytes --]

BCM4908 is one of the Broadcom Broadband origin WLAN Router/Access
Pointer SoCs. It was originally added by Rafał before Broadcom started
to upstream the support for broadband SoCs. All other ARM based Broadcom
Broadband SoCs are now supported under arch ARCH_BCMBCA. This patch
series migrate the BCM4908 support to ARCH_BCMBCA.

Changes in v3:
- Add Reviewed-by tag
- Add Acked-by tags
- Remove the dts break warning from commit message

Changes in v2:
- Add Acked-by tag
- Improve commit message with more details
- Insert the 4908 generic compatible string in alphabetical order

William Zhang (9):
  dt-bindings: arm64: bcmbca: Merge BCM4908 into BCMBCA
  dt-bindings: arm64: bcmbca: Update BCM4908 description
  arm64: dts: bcmbca: update BCM4908 board dts files
  arm64: dts: Move BCM4908 dts to bcmbca folder
  arm64: dts: Add BCM4908 generic board dts
  arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA
  MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry
  arm64: defconfig: remove BCM4908

 .../bindings/arm/bcm/brcm,bcm4908.yaml        | 42 -------------------
 .../bindings/arm/bcm/brcm,bcmbca.yaml         | 25 +++++++++++
 MAINTAINERS                                   |  1 +
 arch/arm64/Kconfig.platforms                  | 10 +----
 arch/arm64/boot/dts/broadcom/Makefile         |  1 -
 arch/arm64/boot/dts/broadcom/bcm4908/Makefile |  5 ---
 arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |  5 +++
 .../bcm4906-netgear-r8000p.dts                |  2 +-
 .../bcm4906-tplink-archer-c2300-v1.dts        |  2 +-
 .../broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi |  0
 .../bcm4908-asus-gt-ac5300.dts                |  2 +-
 .../bcm4908-netgear-raxe500.dts               |  2 +-
 .../broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi |  0
 .../boot/dts/broadcom/bcmbca/bcm94908.dts     | 30 +++++++++++++
 arch/arm64/configs/defconfig                  |  1 -
 drivers/i2c/busses/Kconfig                    |  4 +-
 drivers/mtd/parsers/Kconfig                   |  6 +--
 drivers/net/ethernet/broadcom/Kconfig         |  4 +-
 drivers/pci/controller/Kconfig                |  2 +-
 drivers/phy/broadcom/Kconfig                  |  4 +-
 drivers/pinctrl/bcm/Kconfig                   |  4 +-
 drivers/reset/Kconfig                         |  2 +-
 drivers/soc/bcm/bcm63xx/Kconfig               |  4 +-
 drivers/tty/serial/Kconfig                    |  4 +-
 drivers/watchdog/Kconfig                      |  2 +-
 25 files changed, 84 insertions(+), 80 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
 delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts (96%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts (99%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi (100%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts (97%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts (89%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi (100%)
 create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts

-- 
2.34.1


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

[-- Attachment #2: Type: text/plain, Size: 144 bytes --]

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 44+ messages in thread
* [PATCH v3 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
@ 2022-08-03 17:54 ` William Zhang
  0 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Rob Herring,
	Krzysztof Kozlowski,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	open list, Philipp Zabel, open list:I2C SUBSYSTEM HOST DRIVERS,
	open list:MEMORY TECHNOLOGY DEVICES (MTD),
	open list:NETWORKING DRIVERS,
	open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS,
	open list:GENERIC PHY FRAMEWORK, open list:PIN CONTROL SUBSYSTEM,
	open list:BROADCOM BMIPS MIPS ARCHITECTURE,
	open list:SERIAL DRIVERS, open list:WATCHDOG DEVICE DRIVERS,
	Catalin Marinas, Will Deacon


[-- Attachment #1.1: Type: text/plain, Size: 3276 bytes --]

BCM4908 is one of the Broadcom Broadband origin WLAN Router/Access
Pointer SoCs. It was originally added by Rafał before Broadcom started
to upstream the support for broadband SoCs. All other ARM based Broadcom
Broadband SoCs are now supported under arch ARCH_BCMBCA. This patch
series migrate the BCM4908 support to ARCH_BCMBCA.

Changes in v3:
- Add Reviewed-by tag
- Add Acked-by tags
- Remove the dts break warning from commit message

Changes in v2:
- Add Acked-by tag
- Improve commit message with more details
- Insert the 4908 generic compatible string in alphabetical order

William Zhang (9):
  dt-bindings: arm64: bcmbca: Merge BCM4908 into BCMBCA
  dt-bindings: arm64: bcmbca: Update BCM4908 description
  arm64: dts: bcmbca: update BCM4908 board dts files
  arm64: dts: Move BCM4908 dts to bcmbca folder
  arm64: dts: Add BCM4908 generic board dts
  arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA
  MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry
  arm64: defconfig: remove BCM4908

 .../bindings/arm/bcm/brcm,bcm4908.yaml        | 42 -------------------
 .../bindings/arm/bcm/brcm,bcmbca.yaml         | 25 +++++++++++
 MAINTAINERS                                   |  1 +
 arch/arm64/Kconfig.platforms                  | 10 +----
 arch/arm64/boot/dts/broadcom/Makefile         |  1 -
 arch/arm64/boot/dts/broadcom/bcm4908/Makefile |  5 ---
 arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |  5 +++
 .../bcm4906-netgear-r8000p.dts                |  2 +-
 .../bcm4906-tplink-archer-c2300-v1.dts        |  2 +-
 .../broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi |  0
 .../bcm4908-asus-gt-ac5300.dts                |  2 +-
 .../bcm4908-netgear-raxe500.dts               |  2 +-
 .../broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi |  0
 .../boot/dts/broadcom/bcmbca/bcm94908.dts     | 30 +++++++++++++
 arch/arm64/configs/defconfig                  |  1 -
 drivers/i2c/busses/Kconfig                    |  4 +-
 drivers/mtd/parsers/Kconfig                   |  6 +--
 drivers/net/ethernet/broadcom/Kconfig         |  4 +-
 drivers/pci/controller/Kconfig                |  2 +-
 drivers/phy/broadcom/Kconfig                  |  4 +-
 drivers/pinctrl/bcm/Kconfig                   |  4 +-
 drivers/reset/Kconfig                         |  2 +-
 drivers/soc/bcm/bcm63xx/Kconfig               |  4 +-
 drivers/tty/serial/Kconfig                    |  4 +-
 drivers/watchdog/Kconfig                      |  2 +-
 25 files changed, 84 insertions(+), 80 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
 delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts (96%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts (99%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi (100%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts (97%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts (89%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi (100%)
 create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts

-- 
2.34.1


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 44+ messages in thread
* [PATCH v3 1/9] dt-bindings: arm64: bcmbca: Merge BCM4908 into BCMBCA
  2022-08-03 17:54 ` William Zhang
@ 2022-08-03 17:54   ` William Zhang
  -1 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Rob Herring,
	Anand Gore, Krzysztof Kozlowski, Kursad Oney, Rob Herring,
	devicetree, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 3422 bytes --]

BCM4908 is one of the Broadcom Broadband origin WLAN Router/Access
Pointer SoCs. It was originally added by Rafał before Broadcom
started to upstream the support for broadband SoCs. Now that Broadcom
Broadband SoC is supported under arch ARCH_BCMBCA, this patch moves
BCM4908 SoC device tree descriptions into BCMBCA binding.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>

---

Changes in v3:
- Add Reviewed-by tag

Changes in v2:
- Add Acked-by tag
- Improve commit message with more details

 .../bindings/arm/bcm/brcm,bcm4908.yaml        | 42 -------------------
 .../bindings/arm/bcm/brcm,bcmbca.yaml         | 21 ++++++++++
 2 files changed, 21 insertions(+), 42 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml

diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
deleted file mode 100644
index 9b745531ff04..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
+++ /dev/null
@@ -1,42 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4908.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Broadcom BCM4908 device tree bindings
-
-description:
-  Broadcom BCM4906 / BCM4908 / BCM49408 Wi-Fi/network SoCs with Brahma CPUs.
-
-maintainers:
-  - Rafał Miłecki <rafal@milecki.pl>
-
-properties:
-  $nodename:
-    const: '/'
-  compatible:
-    oneOf:
-      - description: BCM4906 based boards
-        items:
-          - enum:
-              - netgear,r8000p
-              - tplink,archer-c2300-v1
-          - const: brcm,bcm4906
-          - const: brcm,bcm4908
-
-      - description: BCM4908 based boards
-        items:
-          - enum:
-              - asus,gt-ac5300
-              - netgear,raxe500
-          - const: brcm,bcm4908
-
-      - description: BCM49408 based boards
-        items:
-          - const: brcm,bcm49408
-          - const: brcm,bcm4908
-
-additionalProperties: true
-
-...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
index 324e59104360..6a64afa95918 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
@@ -15,6 +15,7 @@ maintainers:
   - William Zhang <william.zhang@broadcom.com>
   - Anand Gore <anand.gore@broadcom.com>
   - Kursad Oney <kursad.oney@broadcom.com>
+  - Rafał Miłecki <rafal@milecki.pl>
 
 properties:
   $nodename:
@@ -28,6 +29,26 @@ properties:
           - const: brcm,bcm47622
           - const: brcm,bcmbca
 
+      - description: BCM4906 based boards
+        items:
+          - enum:
+              - netgear,r8000p
+              - tplink,archer-c2300-v1
+          - const: brcm,bcm4906
+          - const: brcm,bcm4908
+
+      - description: BCM4908 based boards
+        items:
+          - enum:
+              - asus,gt-ac5300
+              - netgear,raxe500
+          - const: brcm,bcm4908
+
+      - description: BCM49408 based boards
+        items:
+          - const: brcm,bcm49408
+          - const: brcm,bcm4908
+
       - description: BCM4912 based boards
         items:
           - enum:
-- 
2.34.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 1/9] dt-bindings: arm64: bcmbca: Merge BCM4908 into BCMBCA
@ 2022-08-03 17:54   ` William Zhang
  0 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Rob Herring,
	Anand Gore, Krzysztof Kozlowski, Kursad Oney, Rob Herring,
	devicetree, linux-kernel


[-- Attachment #1.1: Type: text/plain, Size: 3422 bytes --]

BCM4908 is one of the Broadcom Broadband origin WLAN Router/Access
Pointer SoCs. It was originally added by Rafał before Broadcom
started to upstream the support for broadband SoCs. Now that Broadcom
Broadband SoC is supported under arch ARCH_BCMBCA, this patch moves
BCM4908 SoC device tree descriptions into BCMBCA binding.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>

---

Changes in v3:
- Add Reviewed-by tag

Changes in v2:
- Add Acked-by tag
- Improve commit message with more details

 .../bindings/arm/bcm/brcm,bcm4908.yaml        | 42 -------------------
 .../bindings/arm/bcm/brcm,bcmbca.yaml         | 21 ++++++++++
 2 files changed, 21 insertions(+), 42 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml

diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
deleted file mode 100644
index 9b745531ff04..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
+++ /dev/null
@@ -1,42 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4908.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Broadcom BCM4908 device tree bindings
-
-description:
-  Broadcom BCM4906 / BCM4908 / BCM49408 Wi-Fi/network SoCs with Brahma CPUs.
-
-maintainers:
-  - Rafał Miłecki <rafal@milecki.pl>
-
-properties:
-  $nodename:
-    const: '/'
-  compatible:
-    oneOf:
-      - description: BCM4906 based boards
-        items:
-          - enum:
-              - netgear,r8000p
-              - tplink,archer-c2300-v1
-          - const: brcm,bcm4906
-          - const: brcm,bcm4908
-
-      - description: BCM4908 based boards
-        items:
-          - enum:
-              - asus,gt-ac5300
-              - netgear,raxe500
-          - const: brcm,bcm4908
-
-      - description: BCM49408 based boards
-        items:
-          - const: brcm,bcm49408
-          - const: brcm,bcm4908
-
-additionalProperties: true
-
-...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
index 324e59104360..6a64afa95918 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
@@ -15,6 +15,7 @@ maintainers:
   - William Zhang <william.zhang@broadcom.com>
   - Anand Gore <anand.gore@broadcom.com>
   - Kursad Oney <kursad.oney@broadcom.com>
+  - Rafał Miłecki <rafal@milecki.pl>
 
 properties:
   $nodename:
@@ -28,6 +29,26 @@ properties:
           - const: brcm,bcm47622
           - const: brcm,bcmbca
 
+      - description: BCM4906 based boards
+        items:
+          - enum:
+              - netgear,r8000p
+              - tplink,archer-c2300-v1
+          - const: brcm,bcm4906
+          - const: brcm,bcm4908
+
+      - description: BCM4908 based boards
+        items:
+          - enum:
+              - asus,gt-ac5300
+              - netgear,raxe500
+          - const: brcm,bcm4908
+
+      - description: BCM49408 based boards
+        items:
+          - const: brcm,bcm49408
+          - const: brcm,bcm4908
+
       - description: BCM4912 based boards
         items:
           - enum:
-- 
2.34.1


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 2/9] dt-bindings: arm64: bcmbca: Update BCM4908 description
  2022-08-03 17:54 ` William Zhang
@ 2022-08-03 17:54   ` William Zhang
  -1 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Rob Herring,
	Anand Gore, Krzysztof Kozlowski, Kursad Oney, Rob Herring,
	devicetree, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1725 bytes --]

Append "brcm,bcmbca" to BCM4908 chip family compatible strings to
follow the convention of BCMBCA chip and help identifying chip family.

Also add a bare bone generic 4908 board compatbile string to support any
4908 based board. This is useful for board bring-up test and kernel test
with CPU and memory related change.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Rob Herring <robh@kernel.org>

---

Changes in v3:
- Add Acked-by tag

Changes in v2:
- Add Acked-by tag
- Insert the 4908 generic compatible string in alphabetical order
- Update commit message with more details of 4908 generic board dts

 Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
index 6a64afa95918..84866e29cab0 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
@@ -36,18 +36,22 @@ properties:
               - tplink,archer-c2300-v1
           - const: brcm,bcm4906
           - const: brcm,bcm4908
+          - const: brcm,bcmbca
 
       - description: BCM4908 based boards
         items:
           - enum:
               - asus,gt-ac5300
+              - brcm,bcm94908
               - netgear,raxe500
           - const: brcm,bcm4908
+          - const: brcm,bcmbca
 
       - description: BCM49408 based boards
         items:
           - const: brcm,bcm49408
           - const: brcm,bcm4908
+          - const: brcm,bcmbca
 
       - description: BCM4912 based boards
         items:
-- 
2.34.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 2/9] dt-bindings: arm64: bcmbca: Update BCM4908 description
@ 2022-08-03 17:54   ` William Zhang
  0 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Rob Herring,
	Anand Gore, Krzysztof Kozlowski, Kursad Oney, Rob Herring,
	devicetree, linux-kernel


[-- Attachment #1.1: Type: text/plain, Size: 1725 bytes --]

Append "brcm,bcmbca" to BCM4908 chip family compatible strings to
follow the convention of BCMBCA chip and help identifying chip family.

Also add a bare bone generic 4908 board compatbile string to support any
4908 based board. This is useful for board bring-up test and kernel test
with CPU and memory related change.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Rob Herring <robh@kernel.org>

---

Changes in v3:
- Add Acked-by tag

Changes in v2:
- Add Acked-by tag
- Insert the 4908 generic compatible string in alphabetical order
- Update commit message with more details of 4908 generic board dts

 Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
index 6a64afa95918..84866e29cab0 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
@@ -36,18 +36,22 @@ properties:
               - tplink,archer-c2300-v1
           - const: brcm,bcm4906
           - const: brcm,bcm4908
+          - const: brcm,bcmbca
 
       - description: BCM4908 based boards
         items:
           - enum:
               - asus,gt-ac5300
+              - brcm,bcm94908
               - netgear,raxe500
           - const: brcm,bcm4908
+          - const: brcm,bcmbca
 
       - description: BCM49408 based boards
         items:
           - const: brcm,bcm49408
           - const: brcm,bcm4908
+          - const: brcm,bcmbca
 
       - description: BCM4912 based boards
         items:
-- 
2.34.1


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 3/9] arm64: dts: bcmbca: update BCM4908 board dts files
  2022-08-03 17:54 ` William Zhang
@ 2022-08-03 17:54   ` William Zhang
  -1 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Krzysztof Kozlowski,
	Rob Herring, devicetree, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 2912 bytes --]

Append "brcm,bcmbca" to compatible strings based on the new bcmbca
binding rule for BCM4908 family based boards.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>

---

Changes in v3:
- Remove the dts break warning from commit message

Changes in v2:
- Add Acked-by tag

 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 2 +-
 .../dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts     | 2 +-
 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 2 +-
 .../arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index 2dd028438c22..d8b60575eb4f 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -7,7 +7,7 @@
 #include "bcm4906.dtsi"
 
 / {
-	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908";
+	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
 	model = "Netgear R8000P";
 
 	memory@0 {
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
index 064f7f549665..296393d4aaab 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
@@ -7,7 +7,7 @@
 #include "bcm4906.dtsi"
 
 / {
-	compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908";
+	compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
 	model = "TP-Link Archer C2300 V1";
 
 	memory@0 {
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index 04f8524b5335..787c7ddf9102 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -6,7 +6,7 @@
 #include "bcm4908.dtsi"
 
 / {
-	compatible = "asus,gt-ac5300", "brcm,bcm4908";
+	compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca";
 	model = "Asus GT-AC5300";
 
 	memory@0 {
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
index 3c2cf2d238b6..23b96c663239 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
@@ -3,7 +3,7 @@
 #include "bcm4908.dtsi"
 
 / {
-	compatible = "netgear,raxe500", "brcm,bcm4908";
+	compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca";
 	model = "Netgear RAXE500";
 
 	memory@0 {
-- 
2.34.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 3/9] arm64: dts: bcmbca: update BCM4908 board dts files
@ 2022-08-03 17:54   ` William Zhang
  0 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Krzysztof Kozlowski,
	Rob Herring, devicetree, linux-kernel


[-- Attachment #1.1: Type: text/plain, Size: 2912 bytes --]

Append "brcm,bcmbca" to compatible strings based on the new bcmbca
binding rule for BCM4908 family based boards.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>

---

Changes in v3:
- Remove the dts break warning from commit message

Changes in v2:
- Add Acked-by tag

 arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 2 +-
 .../dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts     | 2 +-
 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 2 +-
 .../arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index 2dd028438c22..d8b60575eb4f 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -7,7 +7,7 @@
 #include "bcm4906.dtsi"
 
 / {
-	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908";
+	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
 	model = "Netgear R8000P";
 
 	memory@0 {
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
index 064f7f549665..296393d4aaab 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
@@ -7,7 +7,7 @@
 #include "bcm4906.dtsi"
 
 / {
-	compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908";
+	compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
 	model = "TP-Link Archer C2300 V1";
 
 	memory@0 {
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index 04f8524b5335..787c7ddf9102 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -6,7 +6,7 @@
 #include "bcm4908.dtsi"
 
 / {
-	compatible = "asus,gt-ac5300", "brcm,bcm4908";
+	compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca";
 	model = "Asus GT-AC5300";
 
 	memory@0 {
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
index 3c2cf2d238b6..23b96c663239 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
@@ -3,7 +3,7 @@
 #include "bcm4908.dtsi"
 
 / {
-	compatible = "netgear,raxe500", "brcm,bcm4908";
+	compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca";
 	model = "Netgear RAXE500";
 
 	memory@0 {
-- 
2.34.1


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 4/9] arm64: dts: Move BCM4908 dts to bcmbca folder
  2022-08-03 17:54 ` William Zhang
@ 2022-08-03 17:54   ` William Zhang
  -1 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Anand Gore,
	Krzysztof Kozlowski, Kursad Oney, Nicolas Saenz Julienne,
	Rob Herring, Stefan Wahren, devicetree, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 4879 bytes --]

As part of ARCH_BCM4908 to ARCH_BCMBCA migration, move the BCM4908 dts
files to bcmbca folder and use CONFIG_ARCH_BCMBCA to build all the
BCM4908 board dts. Delete bcm4908 folder and its makefile as well.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
---

(no changes since v1)

 arch/arm64/boot/dts/broadcom/Makefile                        | 1 -
 arch/arm64/boot/dts/broadcom/bcm4908/Makefile                | 5 -----
 arch/arm64/boot/dts/broadcom/bcmbca/Makefile                 | 4 ++++
 .../broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts  | 0
 .../{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts   | 0
 .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi | 0
 .../broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts  | 0
 .../broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts | 0
 .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi | 0
 9 files changed, 4 insertions(+), 6 deletions(-)
 delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts (100%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts (100%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi (100%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts (100%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts (100%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi (100%)

diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index e8584d3b698f..05d8c5ecf3b0 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -8,7 +8,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
 			      bcm2837-rpi-cm3-io3.dtb \
 			      bcm2837-rpi-zero-2-w.dtb
 
-subdir-y	+= bcm4908
 subdir-y	+= bcmbca
 subdir-y	+= northstar2
 subdir-y	+= stingray
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
deleted file mode 100644
index 6e364e304d4f..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
index 38f14307184b..d30fa75f0611 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
@@ -1,5 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_BCMBCA) += \
+				bcm4906-netgear-r8000p.dtb \
+				bcm4906-tplink-archer-c2300-v1.dtb \
+				bcm4908-asus-gt-ac5300.dtb \
+				bcm4908-netgear-raxe500.dtb \
 				bcm4912-asus-gt-ax6000.dtb \
 				bcm94912.dtb \
 				bcm963158.dtb \
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-- 
2.34.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 4/9] arm64: dts: Move BCM4908 dts to bcmbca folder
@ 2022-08-03 17:54   ` William Zhang
  0 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Anand Gore,
	Krzysztof Kozlowski, Kursad Oney, Nicolas Saenz Julienne,
	Rob Herring, Stefan Wahren, devicetree, linux-kernel


[-- Attachment #1.1: Type: text/plain, Size: 4879 bytes --]

As part of ARCH_BCM4908 to ARCH_BCMBCA migration, move the BCM4908 dts
files to bcmbca folder and use CONFIG_ARCH_BCMBCA to build all the
BCM4908 board dts. Delete bcm4908 folder and its makefile as well.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
---

(no changes since v1)

 arch/arm64/boot/dts/broadcom/Makefile                        | 1 -
 arch/arm64/boot/dts/broadcom/bcm4908/Makefile                | 5 -----
 arch/arm64/boot/dts/broadcom/bcmbca/Makefile                 | 4 ++++
 .../broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts  | 0
 .../{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts   | 0
 .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi | 0
 .../broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts  | 0
 .../broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts | 0
 .../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi | 0
 9 files changed, 4 insertions(+), 6 deletions(-)
 delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts (100%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts (100%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi (100%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts (100%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts (100%)
 rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi (100%)

diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index e8584d3b698f..05d8c5ecf3b0 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -8,7 +8,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
 			      bcm2837-rpi-cm3-io3.dtb \
 			      bcm2837-rpi-zero-2-w.dtb
 
-subdir-y	+= bcm4908
 subdir-y	+= bcmbca
 subdir-y	+= northstar2
 subdir-y	+= stingray
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
deleted file mode 100644
index 6e364e304d4f..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
index 38f14307184b..d30fa75f0611 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
@@ -1,5 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_BCMBCA) += \
+				bcm4906-netgear-r8000p.dtb \
+				bcm4906-tplink-archer-c2300-v1.dtb \
+				bcm4908-asus-gt-ac5300.dtb \
+				bcm4908-netgear-raxe500.dtb \
 				bcm4912-asus-gt-ax6000.dtb \
 				bcm94912.dtb \
 				bcm963158.dtb \
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-- 
2.34.1


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 5/9] arm64: dts: Add BCM4908 generic board dts
  2022-08-03 17:54 ` William Zhang
@ 2022-08-03 17:54   ` William Zhang
  -1 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Anand Gore,
	Krzysztof Kozlowski, Kursad Oney, Rob Herring, devicetree,
	linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1829 bytes --]

Add generic bare bone bcm94908.dts file to support any 4908 based
design. It supports cpu subsystem, memory and an uart console. This can
be useful for board bring-up and cpu subsystem and memory related kernel
test as well.

Signed-off-by: William Zhang <william.zhang@broadcom.com>

---

(no changes since v2)

Changes in v2:
- Update commit message with more details

 arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |  1 +
 .../boot/dts/broadcom/bcmbca/bcm94908.dts     | 30 +++++++++++++++++++
 2 files changed, 31 insertions(+)
 create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts

diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
index d30fa75f0611..27741b71ba9e 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \
 				bcm4906-tplink-archer-c2300-v1.dtb \
 				bcm4908-asus-gt-ac5300.dtb \
 				bcm4908-netgear-raxe500.dtb \
+				bcm94908.dtb \
 				bcm4912-asus-gt-ax6000.dtb \
 				bcm94912.dtb \
 				bcm963158.dtb \
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
new file mode 100644
index 000000000000..fcbd3c430ace
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm4908.dtsi"
+
+/ {
+	model = "Broadcom BCM94908 Reference Board";
+	compatible = "brcm,bcm94908", "brcm,bcm4908", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
-- 
2.34.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 5/9] arm64: dts: Add BCM4908 generic board dts
@ 2022-08-03 17:54   ` William Zhang
  0 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Anand Gore,
	Krzysztof Kozlowski, Kursad Oney, Rob Herring, devicetree,
	linux-kernel


[-- Attachment #1.1: Type: text/plain, Size: 1829 bytes --]

Add generic bare bone bcm94908.dts file to support any 4908 based
design. It supports cpu subsystem, memory and an uart console. This can
be useful for board bring-up and cpu subsystem and memory related kernel
test as well.

Signed-off-by: William Zhang <william.zhang@broadcom.com>

---

(no changes since v2)

Changes in v2:
- Update commit message with more details

 arch/arm64/boot/dts/broadcom/bcmbca/Makefile  |  1 +
 .../boot/dts/broadcom/bcmbca/bcm94908.dts     | 30 +++++++++++++++++++
 2 files changed, 31 insertions(+)
 create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts

diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
index d30fa75f0611..27741b71ba9e 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \
 				bcm4906-tplink-archer-c2300-v1.dtb \
 				bcm4908-asus-gt-ac5300.dtb \
 				bcm4908-netgear-raxe500.dtb \
+				bcm94908.dtb \
 				bcm4912-asus-gt-ax6000.dtb \
 				bcm94912.dtb \
 				bcm963158.dtb \
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
new file mode 100644
index 000000000000..fcbd3c430ace
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm4908.dtsi"
+
+/ {
+	model = "Broadcom BCM94908 Reference Board";
+	compatible = "brcm,bcm94908", "brcm,bcm4908", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
-- 
2.34.1


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  2022-08-03 17:54 ` William Zhang
  (?)
  (?)
@ 2022-08-03 17:54   ` William Zhang
  -1 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Guenter Roeck,
	Bjorn Helgaas, Wolfram Sang, Philipp Zabel, Miquel Raynal,
	David S. Miller, Rob Herring, Kishon Vijay Abraham I, Vinod Koul,
	Linus Walleij, Greg Kroah-Hartman, Wim Van Sebroeck,
	open list:I2C SUBSYSTEM HOST DRIVERS, open list,
	open list:MEMORY TECHNOLOGY DEVICES (MTD),
	open list:NETWORKING DRIVERS,
	open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS,
	open list:GENERIC PHY FRAMEWORK, open list:PIN CONTROL SUBSYSTEM,
	open list:BROADCOM BMIPS MIPS ARCHITECTURE,
	open list:SERIAL DRIVERS, open list:WATCHDOG DEVICE DRIVERS

[-- Attachment #1: Type: text/plain, Size: 7653 bytes --]

With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this
patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence
replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c)
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset)

---

Changes in v3:
- Add Acked-by tags

Changes in v2:
- Add Acked-by tags
- Update commit message with more details

 drivers/i2c/busses/Kconfig            | 4 ++--
 drivers/mtd/parsers/Kconfig           | 6 +++---
 drivers/net/ethernet/broadcom/Kconfig | 4 ++--
 drivers/pci/controller/Kconfig        | 2 +-
 drivers/phy/broadcom/Kconfig          | 4 ++--
 drivers/pinctrl/bcm/Kconfig           | 4 ++--
 drivers/reset/Kconfig                 | 2 +-
 drivers/soc/bcm/bcm63xx/Kconfig       | 4 ++--
 drivers/tty/serial/Kconfig            | 4 ++--
 drivers/watchdog/Kconfig              | 2 +-
 10 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 45a4e9f1b639..fd9a4dd01997 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -487,8 +487,8 @@ config I2C_BCM_KONA
 
 config I2C_BRCMSTB
 	tristate "BRCM Settop/DSL I2C controller"
-	depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
-		   ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+	depends on ARCH_BCM2835 || ARCH_BCMBCA || ARCH_BRCMSTB || \
+		   BMIPS_GENERIC || COMPILE_TEST
 	default y
 	help
 	  If you say yes to this option, support will be included for the
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
index b43df73927a0..d6db655a1d24 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -69,8 +69,8 @@ config MTD_OF_PARTS
 
 config MTD_OF_PARTS_BCM4908
 	bool "BCM4908 partitioning support"
-	depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST)
-	default ARCH_BCM4908
+	depends on MTD_OF_PARTS && (ARCH_BCMBCA || COMPILE_TEST)
+	default ARCH_BCMBCA
 	help
 	  This provides partitions parser for BCM4908 family devices
 	  that can have multiple "firmware" partitions. It takes care of
@@ -78,7 +78,7 @@ config MTD_OF_PARTS_BCM4908
 
 config MTD_OF_PARTS_LINKSYS_NS
 	bool "Linksys Northstar partitioning support"
-	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST)
+	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCMBCA || COMPILE_TEST)
 	default ARCH_BCM_5301X
 	help
 	  This provides partitions parser for Linksys devices based on Broadcom
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 56e0fb07aec7..f4e1ca68d831 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -53,8 +53,8 @@ config B44_PCI
 
 config BCM4908_ENET
 	tristate "Broadcom BCM4908 internal mac support"
-	depends on ARCH_BCM4908 || COMPILE_TEST
-	default y if ARCH_BCM4908
+	depends on ARCH_BCMBCA || COMPILE_TEST
+	default y if ARCH_BCMBCA
 	help
 	  This driver supports Ethernet controller integrated into Broadcom
 	  BCM4908 family SoCs.
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index d1c5fcf00a8a..bfd9bac37e24 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -274,7 +274,7 @@ config VMD
 
 config PCIE_BRCMSTB
 	tristate "Broadcom Brcmstb PCIe host controller"
-	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || \
+	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \
 		   BMIPS_GENERIC || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index 93a6a8ee4716..1d89a2fd9b79 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -93,11 +93,11 @@ config PHY_BRCM_SATA
 
 config PHY_BRCM_USB
 	tristate "Broadcom STB USB PHY driver"
-	depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
+	depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST
 	depends on OF
 	select GENERIC_PHY
 	select SOC_BRCMSTB if ARCH_BRCMSTB
-	default ARCH_BCM4908 || ARCH_BRCMSTB
+	default ARCH_BCMBCA || ARCH_BRCMSTB
 	help
 	  Enable this to support the Broadcom STB USB PHY.
 	  This driver is required by the USB XHCI, EHCI and OHCI
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 8f4d89806fcb..35b51ce4298e 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -31,13 +31,13 @@ config PINCTRL_BCM2835
 
 config PINCTRL_BCM4908
 	tristate "Broadcom BCM4908 pinmux driver"
-	depends on OF && (ARCH_BCM4908 || COMPILE_TEST)
+	depends on OF && (ARCH_BCMBCA || COMPILE_TEST)
 	select PINMUX
 	select PINCONF
 	select GENERIC_PINCONF
 	select GENERIC_PINCTRL_GROUPS
 	select GENERIC_PINMUX_FUNCTIONS
-	default ARCH_BCM4908
+	default ARCH_BCMBCA
 	help
 	  Driver for BCM4908 family SoCs with integrated pin controller.
 
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index f9a7cee01659..7ae71535fe2a 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -201,7 +201,7 @@ config RESET_SCMI
 
 config RESET_SIMPLE
 	bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
-	default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
+	default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
 	help
 	  This enables a simple reset controller driver for reset lines that
 	  that can be asserted and deasserted by toggling bits in a contiguous,
diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig
index 9e501c8ac5ce..355c34482076 100644
--- a/drivers/soc/bcm/bcm63xx/Kconfig
+++ b/drivers/soc/bcm/bcm63xx/Kconfig
@@ -13,8 +13,8 @@ endif # SOC_BCM63XX
 
 config BCM_PMB
 	bool "Broadcom PMB (Power Management Bus) driver"
-	depends on ARCH_BCM4908 || (COMPILE_TEST && OF)
-	default ARCH_BCM4908
+	depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
+	default ARCH_BCMBCA
 	select PM_GENERIC_DOMAINS if PM
 	help
 	  This enables support for the Broadcom's PMB (Power Management Bus) that
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index e3279544b03c..f32bb01c3feb 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1100,8 +1100,8 @@ config SERIAL_TIMBERDALE
 config SERIAL_BCM63XX
 	tristate "Broadcom BCM63xx/BCM33xx UART support"
 	select SERIAL_CORE
-	depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
-	default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
+	depends on ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+	default ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
 	help
 	  This enables the driver for the onchip UART core found on
 	  the following chipsets:
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 32fd37698932..1f85ec8a4b3b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1798,7 +1798,7 @@ config BCM7038_WDT
 	tristate "BCM63xx/BCM7038 Watchdog"
 	select WATCHDOG_CORE
 	depends on HAS_IOMEM
-	depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
+	depends on ARCH_BCMBCA || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
 	help
 	  Watchdog driver for the built-in hardware in Broadcom 7038 and
 	  later SoCs used in set-top boxes.  BCM7038 was made public
-- 
2.34.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
@ 2022-08-03 17:54   ` William Zhang
  0 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Guenter Roeck,
	Bjorn Helgaas, Wolfram Sang, Philipp Zabel, Miquel Raynal,
	David S. Miller, Rob Herring, Kishon Vijay Abraham I, Vinod Koul,
	Linus Walleij, Greg Kroah-Hartman, Wim Van Sebroeck,
	open list:I2C SUBSYSTEM HOST DRIVERS, open list,
	open list:MEMORY TECHNOLOGY DEVICES (MTD),
	open list:NETWORKING DRIVERS,
	open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS,
	open list:GENERIC PHY FRAMEWORK, open list:PIN CONTROL SUBSYSTEM,
	open list:BROADCOM BMIPS MIPS ARCHITECTURE,
	open list:SERIAL DRIVERS, open list:WATCHDOG DEVICE DRIVERS


[-- Attachment #1.1: Type: text/plain, Size: 7653 bytes --]

With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this
patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence
replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c)
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset)

---

Changes in v3:
- Add Acked-by tags

Changes in v2:
- Add Acked-by tags
- Update commit message with more details

 drivers/i2c/busses/Kconfig            | 4 ++--
 drivers/mtd/parsers/Kconfig           | 6 +++---
 drivers/net/ethernet/broadcom/Kconfig | 4 ++--
 drivers/pci/controller/Kconfig        | 2 +-
 drivers/phy/broadcom/Kconfig          | 4 ++--
 drivers/pinctrl/bcm/Kconfig           | 4 ++--
 drivers/reset/Kconfig                 | 2 +-
 drivers/soc/bcm/bcm63xx/Kconfig       | 4 ++--
 drivers/tty/serial/Kconfig            | 4 ++--
 drivers/watchdog/Kconfig              | 2 +-
 10 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 45a4e9f1b639..fd9a4dd01997 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -487,8 +487,8 @@ config I2C_BCM_KONA
 
 config I2C_BRCMSTB
 	tristate "BRCM Settop/DSL I2C controller"
-	depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
-		   ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+	depends on ARCH_BCM2835 || ARCH_BCMBCA || ARCH_BRCMSTB || \
+		   BMIPS_GENERIC || COMPILE_TEST
 	default y
 	help
 	  If you say yes to this option, support will be included for the
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
index b43df73927a0..d6db655a1d24 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -69,8 +69,8 @@ config MTD_OF_PARTS
 
 config MTD_OF_PARTS_BCM4908
 	bool "BCM4908 partitioning support"
-	depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST)
-	default ARCH_BCM4908
+	depends on MTD_OF_PARTS && (ARCH_BCMBCA || COMPILE_TEST)
+	default ARCH_BCMBCA
 	help
 	  This provides partitions parser for BCM4908 family devices
 	  that can have multiple "firmware" partitions. It takes care of
@@ -78,7 +78,7 @@ config MTD_OF_PARTS_BCM4908
 
 config MTD_OF_PARTS_LINKSYS_NS
 	bool "Linksys Northstar partitioning support"
-	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST)
+	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCMBCA || COMPILE_TEST)
 	default ARCH_BCM_5301X
 	help
 	  This provides partitions parser for Linksys devices based on Broadcom
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 56e0fb07aec7..f4e1ca68d831 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -53,8 +53,8 @@ config B44_PCI
 
 config BCM4908_ENET
 	tristate "Broadcom BCM4908 internal mac support"
-	depends on ARCH_BCM4908 || COMPILE_TEST
-	default y if ARCH_BCM4908
+	depends on ARCH_BCMBCA || COMPILE_TEST
+	default y if ARCH_BCMBCA
 	help
 	  This driver supports Ethernet controller integrated into Broadcom
 	  BCM4908 family SoCs.
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index d1c5fcf00a8a..bfd9bac37e24 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -274,7 +274,7 @@ config VMD
 
 config PCIE_BRCMSTB
 	tristate "Broadcom Brcmstb PCIe host controller"
-	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || \
+	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \
 		   BMIPS_GENERIC || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index 93a6a8ee4716..1d89a2fd9b79 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -93,11 +93,11 @@ config PHY_BRCM_SATA
 
 config PHY_BRCM_USB
 	tristate "Broadcom STB USB PHY driver"
-	depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
+	depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST
 	depends on OF
 	select GENERIC_PHY
 	select SOC_BRCMSTB if ARCH_BRCMSTB
-	default ARCH_BCM4908 || ARCH_BRCMSTB
+	default ARCH_BCMBCA || ARCH_BRCMSTB
 	help
 	  Enable this to support the Broadcom STB USB PHY.
 	  This driver is required by the USB XHCI, EHCI and OHCI
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 8f4d89806fcb..35b51ce4298e 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -31,13 +31,13 @@ config PINCTRL_BCM2835
 
 config PINCTRL_BCM4908
 	tristate "Broadcom BCM4908 pinmux driver"
-	depends on OF && (ARCH_BCM4908 || COMPILE_TEST)
+	depends on OF && (ARCH_BCMBCA || COMPILE_TEST)
 	select PINMUX
 	select PINCONF
 	select GENERIC_PINCONF
 	select GENERIC_PINCTRL_GROUPS
 	select GENERIC_PINMUX_FUNCTIONS
-	default ARCH_BCM4908
+	default ARCH_BCMBCA
 	help
 	  Driver for BCM4908 family SoCs with integrated pin controller.
 
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index f9a7cee01659..7ae71535fe2a 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -201,7 +201,7 @@ config RESET_SCMI
 
 config RESET_SIMPLE
 	bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
-	default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
+	default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
 	help
 	  This enables a simple reset controller driver for reset lines that
 	  that can be asserted and deasserted by toggling bits in a contiguous,
diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig
index 9e501c8ac5ce..355c34482076 100644
--- a/drivers/soc/bcm/bcm63xx/Kconfig
+++ b/drivers/soc/bcm/bcm63xx/Kconfig
@@ -13,8 +13,8 @@ endif # SOC_BCM63XX
 
 config BCM_PMB
 	bool "Broadcom PMB (Power Management Bus) driver"
-	depends on ARCH_BCM4908 || (COMPILE_TEST && OF)
-	default ARCH_BCM4908
+	depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
+	default ARCH_BCMBCA
 	select PM_GENERIC_DOMAINS if PM
 	help
 	  This enables support for the Broadcom's PMB (Power Management Bus) that
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index e3279544b03c..f32bb01c3feb 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1100,8 +1100,8 @@ config SERIAL_TIMBERDALE
 config SERIAL_BCM63XX
 	tristate "Broadcom BCM63xx/BCM33xx UART support"
 	select SERIAL_CORE
-	depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
-	default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
+	depends on ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+	default ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
 	help
 	  This enables the driver for the onchip UART core found on
 	  the following chipsets:
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 32fd37698932..1f85ec8a4b3b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1798,7 +1798,7 @@ config BCM7038_WDT
 	tristate "BCM63xx/BCM7038 Watchdog"
 	select WATCHDOG_CORE
 	depends on HAS_IOMEM
-	depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
+	depends on ARCH_BCMBCA || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
 	help
 	  Watchdog driver for the built-in hardware in Broadcom 7038 and
 	  later SoCs used in set-top boxes.  BCM7038 was made public
-- 
2.34.1


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

[-- Attachment #2: Type: text/plain, Size: 144 bytes --]

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
@ 2022-08-03 17:54   ` William Zhang
  0 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Guenter Roeck,
	Bjorn Helgaas, Wolfram Sang, Philipp Zabel, Miquel Raynal,
	David S. Miller, Rob Herring, Kishon Vijay Abraham I, Vinod Koul,
	Linus Walleij, Greg Kroah-Hartman, Wim Van Sebroeck,
	open list:I2C SUBSYSTEM HOST DRIVERS, open list,
	open list:MEMORY TECHNOLOGY DEVICES (MTD),
	open list:NETWORKING DRIVERS,
	open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS,
	open list:GENERIC PHY FRAMEWORK, open list:PIN CONTROL SUBSYSTEM,
	open list:BROADCOM BMIPS MIPS ARCHITECTURE,
	open list:SERIAL DRIVERS, open list:WATCHDOG DEVICE DRIVERS


[-- Attachment #1.1: Type: text/plain, Size: 7653 bytes --]

With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this
patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence
replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c)
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset)

---

Changes in v3:
- Add Acked-by tags

Changes in v2:
- Add Acked-by tags
- Update commit message with more details

 drivers/i2c/busses/Kconfig            | 4 ++--
 drivers/mtd/parsers/Kconfig           | 6 +++---
 drivers/net/ethernet/broadcom/Kconfig | 4 ++--
 drivers/pci/controller/Kconfig        | 2 +-
 drivers/phy/broadcom/Kconfig          | 4 ++--
 drivers/pinctrl/bcm/Kconfig           | 4 ++--
 drivers/reset/Kconfig                 | 2 +-
 drivers/soc/bcm/bcm63xx/Kconfig       | 4 ++--
 drivers/tty/serial/Kconfig            | 4 ++--
 drivers/watchdog/Kconfig              | 2 +-
 10 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 45a4e9f1b639..fd9a4dd01997 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -487,8 +487,8 @@ config I2C_BCM_KONA
 
 config I2C_BRCMSTB
 	tristate "BRCM Settop/DSL I2C controller"
-	depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
-		   ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+	depends on ARCH_BCM2835 || ARCH_BCMBCA || ARCH_BRCMSTB || \
+		   BMIPS_GENERIC || COMPILE_TEST
 	default y
 	help
 	  If you say yes to this option, support will be included for the
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
index b43df73927a0..d6db655a1d24 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -69,8 +69,8 @@ config MTD_OF_PARTS
 
 config MTD_OF_PARTS_BCM4908
 	bool "BCM4908 partitioning support"
-	depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST)
-	default ARCH_BCM4908
+	depends on MTD_OF_PARTS && (ARCH_BCMBCA || COMPILE_TEST)
+	default ARCH_BCMBCA
 	help
 	  This provides partitions parser for BCM4908 family devices
 	  that can have multiple "firmware" partitions. It takes care of
@@ -78,7 +78,7 @@ config MTD_OF_PARTS_BCM4908
 
 config MTD_OF_PARTS_LINKSYS_NS
 	bool "Linksys Northstar partitioning support"
-	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST)
+	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCMBCA || COMPILE_TEST)
 	default ARCH_BCM_5301X
 	help
 	  This provides partitions parser for Linksys devices based on Broadcom
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 56e0fb07aec7..f4e1ca68d831 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -53,8 +53,8 @@ config B44_PCI
 
 config BCM4908_ENET
 	tristate "Broadcom BCM4908 internal mac support"
-	depends on ARCH_BCM4908 || COMPILE_TEST
-	default y if ARCH_BCM4908
+	depends on ARCH_BCMBCA || COMPILE_TEST
+	default y if ARCH_BCMBCA
 	help
 	  This driver supports Ethernet controller integrated into Broadcom
 	  BCM4908 family SoCs.
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index d1c5fcf00a8a..bfd9bac37e24 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -274,7 +274,7 @@ config VMD
 
 config PCIE_BRCMSTB
 	tristate "Broadcom Brcmstb PCIe host controller"
-	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || \
+	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \
 		   BMIPS_GENERIC || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index 93a6a8ee4716..1d89a2fd9b79 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -93,11 +93,11 @@ config PHY_BRCM_SATA
 
 config PHY_BRCM_USB
 	tristate "Broadcom STB USB PHY driver"
-	depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
+	depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST
 	depends on OF
 	select GENERIC_PHY
 	select SOC_BRCMSTB if ARCH_BRCMSTB
-	default ARCH_BCM4908 || ARCH_BRCMSTB
+	default ARCH_BCMBCA || ARCH_BRCMSTB
 	help
 	  Enable this to support the Broadcom STB USB PHY.
 	  This driver is required by the USB XHCI, EHCI and OHCI
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 8f4d89806fcb..35b51ce4298e 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -31,13 +31,13 @@ config PINCTRL_BCM2835
 
 config PINCTRL_BCM4908
 	tristate "Broadcom BCM4908 pinmux driver"
-	depends on OF && (ARCH_BCM4908 || COMPILE_TEST)
+	depends on OF && (ARCH_BCMBCA || COMPILE_TEST)
 	select PINMUX
 	select PINCONF
 	select GENERIC_PINCONF
 	select GENERIC_PINCTRL_GROUPS
 	select GENERIC_PINMUX_FUNCTIONS
-	default ARCH_BCM4908
+	default ARCH_BCMBCA
 	help
 	  Driver for BCM4908 family SoCs with integrated pin controller.
 
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index f9a7cee01659..7ae71535fe2a 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -201,7 +201,7 @@ config RESET_SCMI
 
 config RESET_SIMPLE
 	bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
-	default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
+	default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
 	help
 	  This enables a simple reset controller driver for reset lines that
 	  that can be asserted and deasserted by toggling bits in a contiguous,
diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig
index 9e501c8ac5ce..355c34482076 100644
--- a/drivers/soc/bcm/bcm63xx/Kconfig
+++ b/drivers/soc/bcm/bcm63xx/Kconfig
@@ -13,8 +13,8 @@ endif # SOC_BCM63XX
 
 config BCM_PMB
 	bool "Broadcom PMB (Power Management Bus) driver"
-	depends on ARCH_BCM4908 || (COMPILE_TEST && OF)
-	default ARCH_BCM4908
+	depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
+	default ARCH_BCMBCA
 	select PM_GENERIC_DOMAINS if PM
 	help
 	  This enables support for the Broadcom's PMB (Power Management Bus) that
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index e3279544b03c..f32bb01c3feb 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1100,8 +1100,8 @@ config SERIAL_TIMBERDALE
 config SERIAL_BCM63XX
 	tristate "Broadcom BCM63xx/BCM33xx UART support"
 	select SERIAL_CORE
-	depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
-	default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
+	depends on ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+	default ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
 	help
 	  This enables the driver for the onchip UART core found on
 	  the following chipsets:
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 32fd37698932..1f85ec8a4b3b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1798,7 +1798,7 @@ config BCM7038_WDT
 	tristate "BCM63xx/BCM7038 Watchdog"
 	select WATCHDOG_CORE
 	depends on HAS_IOMEM
-	depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
+	depends on ARCH_BCMBCA || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
 	help
 	  Watchdog driver for the built-in hardware in Broadcom 7038 and
 	  later SoCs used in set-top boxes.  BCM7038 was made public
-- 
2.34.1


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

[-- Attachment #2: Type: text/plain, Size: 112 bytes --]

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
@ 2022-08-03 17:54   ` William Zhang
  0 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Guenter Roeck,
	Bjorn Helgaas, Wolfram Sang, Philipp Zabel, Miquel Raynal,
	David S. Miller, Rob Herring, Kishon Vijay Abraham I, Vinod Koul,
	Linus Walleij, Greg Kroah-Hartman, Wim Van Sebroeck,
	open list:I2C SUBSYSTEM HOST DRIVERS, open list,
	open list:MEMORY TECHNOLOGY DEVICES (MTD),
	open list:NETWORKING DRIVERS,
	open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS,
	open list:GENERIC PHY FRAMEWORK, open list:PIN CONTROL SUBSYSTEM,
	open list:BROADCOM BMIPS MIPS ARCHITECTURE,
	open list:SERIAL DRIVERS, open list:WATCHDOG DEVICE DRIVERS


[-- Attachment #1.1: Type: text/plain, Size: 7653 bytes --]

With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this
patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence
replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c)
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset)

---

Changes in v3:
- Add Acked-by tags

Changes in v2:
- Add Acked-by tags
- Update commit message with more details

 drivers/i2c/busses/Kconfig            | 4 ++--
 drivers/mtd/parsers/Kconfig           | 6 +++---
 drivers/net/ethernet/broadcom/Kconfig | 4 ++--
 drivers/pci/controller/Kconfig        | 2 +-
 drivers/phy/broadcom/Kconfig          | 4 ++--
 drivers/pinctrl/bcm/Kconfig           | 4 ++--
 drivers/reset/Kconfig                 | 2 +-
 drivers/soc/bcm/bcm63xx/Kconfig       | 4 ++--
 drivers/tty/serial/Kconfig            | 4 ++--
 drivers/watchdog/Kconfig              | 2 +-
 10 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 45a4e9f1b639..fd9a4dd01997 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -487,8 +487,8 @@ config I2C_BCM_KONA
 
 config I2C_BRCMSTB
 	tristate "BRCM Settop/DSL I2C controller"
-	depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
-		   ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+	depends on ARCH_BCM2835 || ARCH_BCMBCA || ARCH_BRCMSTB || \
+		   BMIPS_GENERIC || COMPILE_TEST
 	default y
 	help
 	  If you say yes to this option, support will be included for the
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
index b43df73927a0..d6db655a1d24 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -69,8 +69,8 @@ config MTD_OF_PARTS
 
 config MTD_OF_PARTS_BCM4908
 	bool "BCM4908 partitioning support"
-	depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST)
-	default ARCH_BCM4908
+	depends on MTD_OF_PARTS && (ARCH_BCMBCA || COMPILE_TEST)
+	default ARCH_BCMBCA
 	help
 	  This provides partitions parser for BCM4908 family devices
 	  that can have multiple "firmware" partitions. It takes care of
@@ -78,7 +78,7 @@ config MTD_OF_PARTS_BCM4908
 
 config MTD_OF_PARTS_LINKSYS_NS
 	bool "Linksys Northstar partitioning support"
-	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST)
+	depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCMBCA || COMPILE_TEST)
 	default ARCH_BCM_5301X
 	help
 	  This provides partitions parser for Linksys devices based on Broadcom
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
index 56e0fb07aec7..f4e1ca68d831 100644
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -53,8 +53,8 @@ config B44_PCI
 
 config BCM4908_ENET
 	tristate "Broadcom BCM4908 internal mac support"
-	depends on ARCH_BCM4908 || COMPILE_TEST
-	default y if ARCH_BCM4908
+	depends on ARCH_BCMBCA || COMPILE_TEST
+	default y if ARCH_BCMBCA
 	help
 	  This driver supports Ethernet controller integrated into Broadcom
 	  BCM4908 family SoCs.
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index d1c5fcf00a8a..bfd9bac37e24 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -274,7 +274,7 @@ config VMD
 
 config PCIE_BRCMSTB
 	tristate "Broadcom Brcmstb PCIe host controller"
-	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || \
+	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \
 		   BMIPS_GENERIC || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index 93a6a8ee4716..1d89a2fd9b79 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -93,11 +93,11 @@ config PHY_BRCM_SATA
 
 config PHY_BRCM_USB
 	tristate "Broadcom STB USB PHY driver"
-	depends on ARCH_BCM4908 || ARCH_BRCMSTB || COMPILE_TEST
+	depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST
 	depends on OF
 	select GENERIC_PHY
 	select SOC_BRCMSTB if ARCH_BRCMSTB
-	default ARCH_BCM4908 || ARCH_BRCMSTB
+	default ARCH_BCMBCA || ARCH_BRCMSTB
 	help
 	  Enable this to support the Broadcom STB USB PHY.
 	  This driver is required by the USB XHCI, EHCI and OHCI
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 8f4d89806fcb..35b51ce4298e 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -31,13 +31,13 @@ config PINCTRL_BCM2835
 
 config PINCTRL_BCM4908
 	tristate "Broadcom BCM4908 pinmux driver"
-	depends on OF && (ARCH_BCM4908 || COMPILE_TEST)
+	depends on OF && (ARCH_BCMBCA || COMPILE_TEST)
 	select PINMUX
 	select PINCONF
 	select GENERIC_PINCONF
 	select GENERIC_PINCTRL_GROUPS
 	select GENERIC_PINMUX_FUNCTIONS
-	default ARCH_BCM4908
+	default ARCH_BCMBCA
 	help
 	  Driver for BCM4908 family SoCs with integrated pin controller.
 
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index f9a7cee01659..7ae71535fe2a 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -201,7 +201,7 @@ config RESET_SCMI
 
 config RESET_SIMPLE
 	bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
-	default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
+	default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
 	help
 	  This enables a simple reset controller driver for reset lines that
 	  that can be asserted and deasserted by toggling bits in a contiguous,
diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig
index 9e501c8ac5ce..355c34482076 100644
--- a/drivers/soc/bcm/bcm63xx/Kconfig
+++ b/drivers/soc/bcm/bcm63xx/Kconfig
@@ -13,8 +13,8 @@ endif # SOC_BCM63XX
 
 config BCM_PMB
 	bool "Broadcom PMB (Power Management Bus) driver"
-	depends on ARCH_BCM4908 || (COMPILE_TEST && OF)
-	default ARCH_BCM4908
+	depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
+	default ARCH_BCMBCA
 	select PM_GENERIC_DOMAINS if PM
 	help
 	  This enables support for the Broadcom's PMB (Power Management Bus) that
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index e3279544b03c..f32bb01c3feb 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1100,8 +1100,8 @@ config SERIAL_TIMBERDALE
 config SERIAL_BCM63XX
 	tristate "Broadcom BCM63xx/BCM33xx UART support"
 	select SERIAL_CORE
-	depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
-	default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
+	depends on ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+	default ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
 	help
 	  This enables the driver for the onchip UART core found on
 	  the following chipsets:
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 32fd37698932..1f85ec8a4b3b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1798,7 +1798,7 @@ config BCM7038_WDT
 	tristate "BCM63xx/BCM7038 Watchdog"
 	select WATCHDOG_CORE
 	depends on HAS_IOMEM
-	depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
+	depends on ARCH_BCMBCA || ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
 	help
 	  Watchdog driver for the built-in hardware in Broadcom 7038 and
 	  later SoCs used in set-top boxes.  BCM7038 was made public
-- 
2.34.1


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 7/9] arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA
  2022-08-03 17:54 ` William Zhang
@ 2022-08-03 17:54   ` William Zhang
  -1 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Catalin Marinas,
	Will Deacon, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1247 bytes --]

Delete ARCH_BCM4908 platform Kconfig for BCM4908 SoC as it is replaced
by ARCH_BCMBCA and move its selection to ARCH_BCMBCA.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
---

(no changes since v1)

 arch/arm64/Kconfig.platforms | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index e2700db35701..6124349b9b2d 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -47,15 +47,6 @@ config ARCH_BCM2835
 	  This enables support for the Broadcom BCM2837 and BCM2711 SoC.
 	  These SoCs are used in the Raspberry Pi 3 and 4 devices.
 
-config ARCH_BCM4908
-	bool "Broadcom BCM4908 family"
-	select ARCH_BCMBCA
-	select GPIOLIB
-	help
-	  This enables support for the Broadcom BCM4906, BCM4908 and
-	  BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be
-	  found in home routers.
-
 config ARCH_BCM_IPROC
 	bool "Broadcom iProc SoC Family"
 	select COMMON_CLK_IPROC
@@ -66,6 +57,7 @@ config ARCH_BCM_IPROC
 
 config ARCH_BCMBCA
 	bool "Broadcom Broadband Carrier Access (BCA) origin SoC"
+	select GPIOLIB
 	help
 	  Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based
 	  BCA chipset.
-- 
2.34.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 7/9] arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA
@ 2022-08-03 17:54   ` William Zhang
  0 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Catalin Marinas,
	Will Deacon, linux-kernel


[-- Attachment #1.1: Type: text/plain, Size: 1247 bytes --]

Delete ARCH_BCM4908 platform Kconfig for BCM4908 SoC as it is replaced
by ARCH_BCMBCA and move its selection to ARCH_BCMBCA.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
---

(no changes since v1)

 arch/arm64/Kconfig.platforms | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index e2700db35701..6124349b9b2d 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -47,15 +47,6 @@ config ARCH_BCM2835
 	  This enables support for the Broadcom BCM2837 and BCM2711 SoC.
 	  These SoCs are used in the Raspberry Pi 3 and 4 devices.
 
-config ARCH_BCM4908
-	bool "Broadcom BCM4908 family"
-	select ARCH_BCMBCA
-	select GPIOLIB
-	help
-	  This enables support for the Broadcom BCM4906, BCM4908 and
-	  BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be
-	  found in home routers.
-
 config ARCH_BCM_IPROC
 	bool "Broadcom iProc SoC Family"
 	select COMMON_CLK_IPROC
@@ -66,6 +57,7 @@ config ARCH_BCM_IPROC
 
 config ARCH_BCMBCA
 	bool "Broadcom Broadband Carrier Access (BCA) origin SoC"
+	select GPIOLIB
 	help
 	  Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based
 	  BCA chipset.
-- 
2.34.1


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 8/9] MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry
  2022-08-03 17:54 ` William Zhang
@ 2022-08-03 17:54   ` William Zhang
  -1 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 780 bytes --]

Since BCM4908 SoC support is merged into ARCH_BCMBCA, add BCM4908
maintainer Rafal to bcmbca maintainer list.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
---

(no changes since v1)

 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 87e7467d8097..bcc508f4e6c7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3919,6 +3919,7 @@ M:	William Zhang <william.zhang@broadcom.com>
 M:	Anand Gore <anand.gore@broadcom.com>
 M:	Kursad Oney <kursad.oney@broadcom.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Rafał Miłecki <rafal@milecki.pl>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-- 
2.34.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 8/9] MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry
@ 2022-08-03 17:54   ` William Zhang
  0 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, linux-kernel


[-- Attachment #1.1: Type: text/plain, Size: 780 bytes --]

Since BCM4908 SoC support is merged into ARCH_BCMBCA, add BCM4908
maintainer Rafal to bcmbca maintainer list.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
---

(no changes since v1)

 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 87e7467d8097..bcc508f4e6c7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3919,6 +3919,7 @@ M:	William Zhang <william.zhang@broadcom.com>
 M:	Anand Gore <anand.gore@broadcom.com>
 M:	Kursad Oney <kursad.oney@broadcom.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	Rafał Miłecki <rafal@milecki.pl>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-- 
2.34.1


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 9/9] arm64: defconfig: remove BCM4908
  2022-08-03 17:54 ` William Zhang
@ 2022-08-03 17:54   ` William Zhang
  -1 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Biju Das,
	Bjorn Andersson, Catalin Marinas, Dmitry Baryshkov,
	Geert Uytterhoeven, Marcel Ziswiler, Shawn Guo, Vinod Koul,
	Will Deacon, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 617 bytes --]

Remove CONFIG_ARCH_BCM4908. It is supported under CONFIG_ARCH_BCMBCA.

Signed-off-by: William Zhang <william.zhang@broadcom.com>

---

(no changes since v1)

 arch/arm64/configs/defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 84b203877f91..d0e89702a4da 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -35,7 +35,6 @@ CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_APPLE=y
 CONFIG_ARCH_BCM2835=y
-CONFIG_ARCH_BCM4908=y
 CONFIG_ARCH_BCMBCA=y
 CONFIG_ARCH_BCM_IPROC=y
 CONFIG_ARCH_BERLIN=y
-- 
2.34.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* [PATCH v3 9/9] arm64: defconfig: remove BCM4908
@ 2022-08-03 17:54   ` William Zhang
  0 siblings, 0 replies; 44+ messages in thread
From: William Zhang @ 2022-08-03 17:54 UTC (permalink / raw)
  To: Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, William Zhang, Biju Das,
	Bjorn Andersson, Catalin Marinas, Dmitry Baryshkov,
	Geert Uytterhoeven, Marcel Ziswiler, Shawn Guo, Vinod Koul,
	Will Deacon, linux-kernel


[-- Attachment #1.1: Type: text/plain, Size: 617 bytes --]

Remove CONFIG_ARCH_BCM4908. It is supported under CONFIG_ARCH_BCMBCA.

Signed-off-by: William Zhang <william.zhang@broadcom.com>

---

(no changes since v1)

 arch/arm64/configs/defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 84b203877f91..d0e89702a4da 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -35,7 +35,6 @@ CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_APPLE=y
 CONFIG_ARCH_BCM2835=y
-CONFIG_ARCH_BCM4908=y
 CONFIG_ARCH_BCMBCA=y
 CONFIG_ARCH_BCM_IPROC=y
 CONFIG_ARCH_BERLIN=y
-- 
2.34.1


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 2/9] dt-bindings: arm64: bcmbca: Update BCM4908 description
  2022-08-03 17:54   ` William Zhang
@ 2022-08-15 16:49     ` Florian Fainelli
  -1 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:49 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, William Zhang, Linux ARM List
  Cc: joel.peshkin, dan.beygelman, krzysztof.kozlowski, rafal,
	Rob Herring, Anand Gore, Krzysztof Kozlowski, Kursad Oney,
	Rob Herring, devicetree, linux-kernel

On Wed,  3 Aug 2022 10:54:48 -0700, William Zhang <william.zhang@broadcom.com> wrote:
> Append "brcm,bcmbca" to BCM4908 chip family compatible strings to
> follow the convention of BCMBCA chip and help identifying chip family.
> 
> Also add a bare bone generic 4908 board compatbile string to support any
> 4908 based board. This is useful for board bring-up test and kernel test
> with CPU and memory related change.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> Acked-by: Rafał Miłecki <rafal@milecki.pl>
> Acked-by: Rob Herring <robh@kernel.org>
> 
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 2/9] dt-bindings: arm64: bcmbca: Update BCM4908 description
@ 2022-08-15 16:49     ` Florian Fainelli
  0 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:49 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, William Zhang, Linux ARM List
  Cc: joel.peshkin, dan.beygelman, krzysztof.kozlowski, rafal,
	Rob Herring, Anand Gore, Krzysztof Kozlowski, Kursad Oney,
	Rob Herring, devicetree, linux-kernel

On Wed,  3 Aug 2022 10:54:48 -0700, William Zhang <william.zhang@broadcom.com> wrote:
> Append "brcm,bcmbca" to BCM4908 chip family compatible strings to
> follow the convention of BCMBCA chip and help identifying chip family.
> 
> Also add a bare bone generic 4908 board compatbile string to support any
> 4908 based board. This is useful for board bring-up test and kernel test
> with CPU and memory related change.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> Acked-by: Rafał Miłecki <rafal@milecki.pl>
> Acked-by: Rob Herring <robh@kernel.org>
> 
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 3/9] arm64: dts: bcmbca: update BCM4908 board dts files
  2022-08-03 17:54   ` William Zhang
@ 2022-08-15 16:50     ` Florian Fainelli
  -1 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:50 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, William Zhang, Linux ARM List
  Cc: joel.peshkin, dan.beygelman, krzysztof.kozlowski, rafal,
	Krzysztof Kozlowski, Rob Herring, devicetree, linux-kernel

On Wed,  3 Aug 2022 10:54:49 -0700, William Zhang <william.zhang@broadcom.com> wrote:
> Append "brcm,bcmbca" to compatible strings based on the new bcmbca
> binding rule for BCM4908 family based boards.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> Acked-by: Rafał Miłecki <rafal@milecki.pl>
> 
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 3/9] arm64: dts: bcmbca: update BCM4908 board dts files
@ 2022-08-15 16:50     ` Florian Fainelli
  0 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:50 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, William Zhang, Linux ARM List
  Cc: joel.peshkin, dan.beygelman, krzysztof.kozlowski, rafal,
	Krzysztof Kozlowski, Rob Herring, devicetree, linux-kernel

On Wed,  3 Aug 2022 10:54:49 -0700, William Zhang <william.zhang@broadcom.com> wrote:
> Append "brcm,bcmbca" to compatible strings based on the new bcmbca
> binding rule for BCM4908 family based boards.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> Acked-by: Rafał Miłecki <rafal@milecki.pl>
> 
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 4/9] arm64: dts: Move BCM4908 dts to bcmbca folder
  2022-08-03 17:54   ` William Zhang
@ 2022-08-15 16:51     ` Florian Fainelli
  -1 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:51 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, William Zhang, Linux ARM List
  Cc: joel.peshkin, dan.beygelman, krzysztof.kozlowski, rafal,
	Anand Gore, Krzysztof Kozlowski, Kursad Oney,
	Nicolas Saenz Julienne, Rob Herring, Stefan Wahren, devicetree,
	linux-kernel

On Wed,  3 Aug 2022 10:54:50 -0700, William Zhang <william.zhang@broadcom.com> wrote:
> As part of ARCH_BCM4908 to ARCH_BCMBCA migration, move the BCM4908 dts
> files to bcmbca folder and use CONFIG_ARCH_BCMBCA to build all the
> BCM4908 board dts. Delete bcm4908 folder and its makefile as well.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 4/9] arm64: dts: Move BCM4908 dts to bcmbca folder
@ 2022-08-15 16:51     ` Florian Fainelli
  0 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:51 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, William Zhang, Linux ARM List
  Cc: joel.peshkin, dan.beygelman, krzysztof.kozlowski, rafal,
	Anand Gore, Krzysztof Kozlowski, Kursad Oney,
	Nicolas Saenz Julienne, Rob Herring, Stefan Wahren, devicetree,
	linux-kernel

On Wed,  3 Aug 2022 10:54:50 -0700, William Zhang <william.zhang@broadcom.com> wrote:
> As part of ARCH_BCM4908 to ARCH_BCMBCA migration, move the BCM4908 dts
> files to bcmbca folder and use CONFIG_ARCH_BCMBCA to build all the
> BCM4908 board dts. Delete bcm4908 folder and its makefile as well.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 5/9] arm64: dts: Add BCM4908 generic board dts
  2022-08-03 17:54   ` William Zhang
@ 2022-08-15 16:51     ` Florian Fainelli
  -1 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:51 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, William Zhang, Linux ARM List
  Cc: joel.peshkin, dan.beygelman, krzysztof.kozlowski, rafal,
	Anand Gore, Krzysztof Kozlowski, Kursad Oney, Rob Herring,
	devicetree, linux-kernel

On Wed,  3 Aug 2022 10:54:51 -0700, William Zhang <william.zhang@broadcom.com> wrote:
> Add generic bare bone bcm94908.dts file to support any 4908 based
> design. It supports cpu subsystem, memory and an uart console. This can
> be useful for board bring-up and cpu subsystem and memory related kernel
> test as well.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> 
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 5/9] arm64: dts: Add BCM4908 generic board dts
@ 2022-08-15 16:51     ` Florian Fainelli
  0 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:51 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, William Zhang, Linux ARM List
  Cc: joel.peshkin, dan.beygelman, krzysztof.kozlowski, rafal,
	Anand Gore, Krzysztof Kozlowski, Kursad Oney, Rob Herring,
	devicetree, linux-kernel

On Wed,  3 Aug 2022 10:54:51 -0700, William Zhang <william.zhang@broadcom.com> wrote:
> Add generic bare bone bcm94908.dts file to support any 4908 based
> design. It supports cpu subsystem, memory and an uart console. This can
> be useful for board bring-up and cpu subsystem and memory related kernel
> test as well.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> 
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 7/9] arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA
  2022-08-03 17:54   ` William Zhang
@ 2022-08-15 16:56     ` Florian Fainelli
  -1 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:56 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, William Zhang, Linux ARM List
  Cc: joel.peshkin, dan.beygelman, krzysztof.kozlowski, rafal,
	Catalin Marinas, Will Deacon, linux-kernel

On Wed,  3 Aug 2022 10:54:53 -0700, William Zhang <william.zhang@broadcom.com> wrote:
> Delete ARCH_BCM4908 platform Kconfig for BCM4908 SoC as it is replaced
> by ARCH_BCMBCA and move its selection to ARCH_BCMBCA.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 7/9] arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA
@ 2022-08-15 16:56     ` Florian Fainelli
  0 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:56 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, William Zhang, Linux ARM List
  Cc: joel.peshkin, dan.beygelman, krzysztof.kozlowski, rafal,
	Catalin Marinas, Will Deacon, linux-kernel

On Wed,  3 Aug 2022 10:54:53 -0700, William Zhang <william.zhang@broadcom.com> wrote:
> Delete ARCH_BCM4908 platform Kconfig for BCM4908 SoC as it is replaced
> by ARCH_BCMBCA and move its selection to ARCH_BCMBCA.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 8/9] MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry
  2022-08-03 17:54   ` William Zhang
@ 2022-08-15 16:56     ` Florian Fainelli
  -1 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:56 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, William Zhang, Linux ARM List
  Cc: joel.peshkin, dan.beygelman, krzysztof.kozlowski, rafal, linux-kernel

On Wed,  3 Aug 2022 10:54:54 -0700, William Zhang <william.zhang@broadcom.com> wrote:
> Since BCM4908 SoC support is merged into ARCH_BCMBCA, add BCM4908
> maintainer Rafal to bcmbca maintainer list.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/maintainers/next, thanks!
--
Florian

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 8/9] MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry
@ 2022-08-15 16:56     ` Florian Fainelli
  0 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:56 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, William Zhang, Linux ARM List
  Cc: joel.peshkin, dan.beygelman, krzysztof.kozlowski, rafal, linux-kernel

On Wed,  3 Aug 2022 10:54:54 -0700, William Zhang <william.zhang@broadcom.com> wrote:
> Since BCM4908 SoC support is merged into ARCH_BCMBCA, add BCM4908
> maintainer Rafal to bcmbca maintainer list.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/maintainers/next, thanks!
--
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  2022-08-03 17:54   ` William Zhang
  (?)
  (?)
@ 2022-08-15 16:57     ` Florian Fainelli
  -1 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:57 UTC (permalink / raw)
  To: William Zhang, Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, Guenter Roeck, Bjorn Helgaas,
	Wolfram Sang, Philipp Zabel, Miquel Raynal, David S. Miller,
	Rob Herring, Kishon Vijay Abraham I, Vinod Koul, Linus Walleij,
	Greg Kroah-Hartman, Wim Van Sebroeck,
	open list:I2C SUBSYSTEM HOST DRIVERS, open list,
	open list:MEMORY TECHNOLOGY DEVICES (MTD),
	open list:NETWORKING DRIVERS,
	open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS,
	open list:GENERIC PHY FRAMEWORK, open list:PIN CONTROL SUBSYSTEM,
	open list:BROADCOM BMIPS MIPS ARCHITECTURE,
	open list:SERIAL DRIVERS, open list:WATCHDOG DEVICE DRIVERS

On 8/3/22 10:54, William Zhang wrote:
> With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this
> patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence
> replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog)
> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
> Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c)
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset)

Applied to https://github.com/Broadcom/stblinux/commits/drivers/next, 
thanks!
-- 
Florian

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
@ 2022-08-15 16:57     ` Florian Fainelli
  0 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:57 UTC (permalink / raw)
  To: William Zhang, Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, Guenter Roeck, Bjorn Helgaas,
	Wolfram Sang, Philipp Zabel, Miquel Raynal, David S. Miller,
	Rob Herring, Kishon Vijay Abraham I, Vinod Koul, Linus Walleij,
	Greg Kroah-Hartman, Wim Van Sebroeck,
	open list:I2C SUBSYSTEM HOST DRIVERS, open list,
	open list:MEMORY TECHNOLOGY DEVICES (MTD),
	open list:NETWORKING DRIVERS,
	open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS,
	open list:GENERIC PHY FRAMEWORK, open list:PIN CONTROL SUBSYSTEM,
	open list:BROADCOM BMIPS MIPS ARCHITECTURE,
	open list:SERIAL DRIVERS, open list:WATCHDOG DEVICE DRIVERS

On 8/3/22 10:54, William Zhang wrote:
> With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this
> patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence
> replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog)
> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
> Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c)
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset)

Applied to https://github.com/Broadcom/stblinux/commits/drivers/next, 
thanks!
-- 
Florian

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
@ 2022-08-15 16:57     ` Florian Fainelli
  0 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:57 UTC (permalink / raw)
  To: William Zhang, Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, Guenter Roeck, Bjorn Helgaas,
	Wolfram Sang, Philipp Zabel, Miquel Raynal, David S. Miller,
	Rob Herring, Kishon Vijay Abraham I, Vinod Koul, Linus Walleij,
	Greg Kroah-Hartman, Wim Van Sebroeck,
	open list:I2C SUBSYSTEM HOST DRIVERS, open list,
	open list:MEMORY TECHNOLOGY DEVICES (MTD),
	open list:NETWORKING DRIVERS,
	open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS,
	open list:GENERIC PHY FRAMEWORK, open list:PIN CONTROL SUBSYSTEM,
	open list:BROADCOM BMIPS MIPS ARCHITECTURE,
	open list:SERIAL DRIVERS, open list:WATCHDOG DEVICE DRIVERS

On 8/3/22 10:54, William Zhang wrote:
> With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this
> patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence
> replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog)
> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
> Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c)
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset)

Applied to https://github.com/Broadcom/stblinux/commits/drivers/next, 
thanks!
-- 
Florian

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
@ 2022-08-15 16:57     ` Florian Fainelli
  0 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:57 UTC (permalink / raw)
  To: William Zhang, Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, Guenter Roeck, Bjorn Helgaas,
	Wolfram Sang, Philipp Zabel, Miquel Raynal, David S. Miller,
	Rob Herring, Kishon Vijay Abraham I, Vinod Koul, Linus Walleij,
	Greg Kroah-Hartman, Wim Van Sebroeck,
	open list:I2C SUBSYSTEM HOST DRIVERS, open list,
	open list:MEMORY TECHNOLOGY DEVICES (MTD),
	open list:NETWORKING DRIVERS,
	open list:PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS,
	open list:GENERIC PHY FRAMEWORK, open list:PIN CONTROL SUBSYSTEM,
	open list:BROADCOM BMIPS MIPS ARCHITECTURE,
	open list:SERIAL DRIVERS, open list:WATCHDOG DEVICE DRIVERS

On 8/3/22 10:54, William Zhang wrote:
> With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this
> patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence
> replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> Acked-by: Guenter Roeck <linux@roeck-us.net> (for watchdog)
> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
> Acked-by: Wolfram Sang <wsa@kernel.org> (for i2c)
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> (for reset)

Applied to https://github.com/Broadcom/stblinux/commits/drivers/next, 
thanks!
-- 
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 9/9] arm64: defconfig: remove BCM4908
  2022-08-03 17:54   ` William Zhang
@ 2022-08-15 16:57     ` Florian Fainelli
  -1 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:57 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, William Zhang, Linux ARM List
  Cc: joel.peshkin, dan.beygelman, krzysztof.kozlowski, rafal,
	Biju Das, Bjorn Andersson, Catalin Marinas, Dmitry Baryshkov,
	Geert Uytterhoeven, Marcel Ziswiler, Shawn Guo, Vinod Koul,
	Will Deacon, linux-kernel

On Wed,  3 Aug 2022 10:54:55 -0700, William Zhang <william.zhang@broadcom.com> wrote:
> Remove CONFIG_ARCH_BCM4908. It is supported under CONFIG_ARCH_BCMBCA.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> 
> ---

Applied to https://github.com/Broadcom/stblinux/commits/defconfig-arm64/next, thanks!
--
Florian

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 9/9] arm64: defconfig: remove BCM4908
@ 2022-08-15 16:57     ` Florian Fainelli
  0 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:57 UTC (permalink / raw)
  To: bcm-kernel-feedback-list, William Zhang, Linux ARM List
  Cc: joel.peshkin, dan.beygelman, krzysztof.kozlowski, rafal,
	Biju Das, Bjorn Andersson, Catalin Marinas, Dmitry Baryshkov,
	Geert Uytterhoeven, Marcel Ziswiler, Shawn Guo, Vinod Koul,
	Will Deacon, linux-kernel

On Wed,  3 Aug 2022 10:54:55 -0700, William Zhang <william.zhang@broadcom.com> wrote:
> Remove CONFIG_ARCH_BCM4908. It is supported under CONFIG_ARCH_BCMBCA.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> 
> ---

Applied to https://github.com/Broadcom/stblinux/commits/defconfig-arm64/next, thanks!
--
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 1/9] dt-bindings: arm64: bcmbca: Merge BCM4908 into BCMBCA
  2022-08-03 17:54   ` William Zhang
@ 2022-08-15 16:58     ` Florian Fainelli
  -1 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:58 UTC (permalink / raw)
  To: William Zhang, Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, Rob Herring, Anand Gore,
	Krzysztof Kozlowski, Kursad Oney, Rob Herring, devicetree,
	linux-kernel

On 8/3/22 10:54, William Zhang wrote:
> BCM4908 is one of the Broadcom Broadband origin WLAN Router/Access
> Pointer SoCs. It was originally added by Rafał before Broadcom
> started to upstream the support for broadband SoCs. Now that Broadcom
> Broadband SoC is supported under arch ARCH_BCMBCA, this patch moves
> BCM4908 SoC device tree descriptions into BCMBCA binding.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> Acked-by: Rafał Miłecki <rafal@milecki.pl>
> Reviewed-by: Rob Herring <robh@kernel.org>
> 
> ---

Applied to https://github.com/Broadcom/stblinux/devicetree/next, thanks!
-- 
Florian

^ permalink raw reply	[flat|nested] 44+ messages in thread
* Re: [PATCH v3 1/9] dt-bindings: arm64: bcmbca: Merge BCM4908 into BCMBCA
@ 2022-08-15 16:58     ` Florian Fainelli
  0 siblings, 0 replies; 44+ messages in thread
From: Florian Fainelli @ 2022-08-15 16:58 UTC (permalink / raw)
  To: William Zhang, Linux ARM List
  Cc: Broadcom Kernel List, joel.peshkin, dan.beygelman, f.fainelli,
	krzysztof.kozlowski, rafal, Rob Herring, Anand Gore,
	Krzysztof Kozlowski, Kursad Oney, Rob Herring, devicetree,
	linux-kernel

On 8/3/22 10:54, William Zhang wrote:
> BCM4908 is one of the Broadcom Broadband origin WLAN Router/Access
> Pointer SoCs. It was originally added by Rafał before Broadcom
> started to upstream the support for broadband SoCs. Now that Broadcom
> Broadband SoC is supported under arch ARCH_BCMBCA, this patch moves
> BCM4908 SoC device tree descriptions into BCMBCA binding.
> 
> Signed-off-by: William Zhang <william.zhang@broadcom.com>
> Acked-by: Rafał Miłecki <rafal@milecki.pl>
> Reviewed-by: Rob Herring <robh@kernel.org>
> 
> ---

Applied to https://github.com/Broadcom/stblinux/devicetree/next, thanks!
-- 
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 44+ messages in thread
end of thread, other threads:[~2022-08-15 17:44 UTC | newest]

Thread overview: 44+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-08-03 17:54 [PATCH v3 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA William Zhang
2022-08-03 17:54 ` William Zhang
2022-08-03 17:54 ` William Zhang
2022-08-03 17:54 ` William Zhang
2022-08-03 17:54 ` [PATCH v3 1/9] dt-bindings: arm64: bcmbca: Merge BCM4908 into BCMBCA William Zhang
2022-08-03 17:54   ` William Zhang
2022-08-15 16:58   ` Florian Fainelli
2022-08-15 16:58     ` Florian Fainelli
2022-08-03 17:54 ` [PATCH v3 2/9] dt-bindings: arm64: bcmbca: Update BCM4908 description William Zhang
2022-08-03 17:54   ` William Zhang
2022-08-15 16:49   ` Florian Fainelli
2022-08-15 16:49     ` Florian Fainelli
2022-08-03 17:54 ` [PATCH v3 3/9] arm64: dts: bcmbca: update BCM4908 board dts files William Zhang
2022-08-03 17:54   ` William Zhang
2022-08-15 16:50   ` Florian Fainelli
2022-08-15 16:50     ` Florian Fainelli
2022-08-03 17:54 ` [PATCH v3 4/9] arm64: dts: Move BCM4908 dts to bcmbca folder William Zhang
2022-08-03 17:54   ` William Zhang
2022-08-15 16:51   ` Florian Fainelli
2022-08-15 16:51     ` Florian Fainelli
2022-08-03 17:54 ` [PATCH v3 5/9] arm64: dts: Add BCM4908 generic board dts William Zhang
2022-08-03 17:54   ` William Zhang
2022-08-15 16:51   ` Florian Fainelli
2022-08-15 16:51     ` Florian Fainelli
2022-08-03 17:54 ` [PATCH v3 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA William Zhang
2022-08-03 17:54   ` William Zhang
2022-08-03 17:54   ` William Zhang
2022-08-03 17:54   ` William Zhang
2022-08-15 16:57   ` Florian Fainelli
2022-08-15 16:57     ` Florian Fainelli
2022-08-15 16:57     ` Florian Fainelli
2022-08-15 16:57     ` Florian Fainelli
2022-08-03 17:54 ` [PATCH v3 7/9] arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA William Zhang
2022-08-03 17:54   ` William Zhang
2022-08-15 16:56   ` Florian Fainelli
2022-08-15 16:56     ` Florian Fainelli
2022-08-03 17:54 ` [PATCH v3 8/9] MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry William Zhang
2022-08-03 17:54   ` William Zhang
2022-08-15 16:56   ` Florian Fainelli
2022-08-15 16:56     ` Florian Fainelli
2022-08-03 17:54 ` [PATCH v3 9/9] arm64: defconfig: remove BCM4908 William Zhang
2022-08-03 17:54   ` William Zhang
2022-08-15 16:57   ` Florian Fainelli
2022-08-15 16:57     ` Florian Fainelli

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.