On Thu, Aug 11, 2022 at 10:47:18AM +0300, Matwey V. Kornilov wrote:

> Can somebody please advise me working CONFIG_DEBUG_UART _* values for
> the board? I think I need to obtain some output from the board to
> debug it further.

Reading arch/arm/dts/am33xx-l4.dtsi isn't as easy to read as I would
personally like but 0x44e09000 is UART0 and so forth. Updating 
doc/board/ti/am335x_evm.rst once you're done with a note about using
DEBUG_UART would be appreciated, thanks.

-- 
Tom