All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Marcus Folkesson <marcus.folkesson@gmail.com>
Cc: Kent Gustavsson <kent@minoris.se>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register
Date: Sat, 20 Aug 2022 13:41:50 +0100	[thread overview]
Message-ID: <20220820134150.2b45339c@jic23-huawei> (raw)
In-Reply-To: <20220815061625.35568-5-marcus.folkesson@gmail.com>

On Mon, 15 Aug 2022 08:16:20 +0200
Marcus Folkesson <marcus.folkesson@gmail.com> wrote:

> Keep using managed resources as much as possible.
> 
> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> ---
>  drivers/iio/adc/mcp3911.c | 53 ++++++++++++---------------------------
>  1 file changed, 16 insertions(+), 37 deletions(-)
> 
> diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c
> index 890af7dca62d..7e2efe702e57 100644
> --- a/drivers/iio/adc/mcp3911.c
> +++ b/drivers/iio/adc/mcp3911.c
> @@ -258,6 +258,13 @@ static int mcp3911_config(struct mcp3911 *adc)
>  	return  mcp3911_write(adc, MCP3911_REG_CONFIG, configreg, 2);
>  }
>  
> +static void mcp3911_cleanup_regulator(void *_adc)

Missed this on previous versions, but why not pass
the regulator pointer in as the parameter for the callback?

static void mcp391_cleanup_regulator(void *reg)
{
	regulator_disable(adc->vref);
}

Note this can't use the new devm_regulator_get_enable()
because we need access to the regulator within the driver.

I can tidy this up whilst applying (or given it's really minor I might
not bother :)

Note we are stalled at the moment with this series on getting the
fixes upstream.  I'll probably send that pull request shortly.

> +{
> +	struct mcp3911 *adc = _adc;
> +
> +	regulator_disable(adc->vref);
> +}
> +
>  static int mcp3911_probe(struct spi_device *spi)
>  {
>  	struct iio_dev *indio_dev;
> @@ -286,9 +293,14 @@ static int mcp3911_probe(struct spi_device *spi)
>  		ret = regulator_enable(adc->vref);
>  		if (ret)
>  			return ret;
> +
> +		ret = devm_add_action_or_reset(&spi->dev,
> +				mcp3911_cleanup_regulator, adc);
> +		if (ret)
> +			return ret;
>  	}
>  
> -	adc->clki = devm_clk_get(&adc->spi->dev, NULL);
> +	adc->clki = devm_clk_get_enabled(&adc->spi->dev, NULL);
>  	if (IS_ERR(adc->clki)) {
>  		if (PTR_ERR(adc->clki) == -ENOENT) {
>  			adc->clki = NULL;
> @@ -296,21 +308,13 @@ static int mcp3911_probe(struct spi_device *spi)
>  			dev_err(&adc->spi->dev,
>  				"failed to get adc clk (%ld)\n",
>  				PTR_ERR(adc->clki));
> -			ret = PTR_ERR(adc->clki);
> -			goto reg_disable;
> -		}
> -	} else {
> -		ret = clk_prepare_enable(adc->clki);
> -		if (ret < 0) {
> -			dev_err(&adc->spi->dev,
> -				"Failed to enable clki: %d\n", ret);
> -			goto reg_disable;
> +			return PTR_ERR(adc->clki);
>  		}
>  	}
>  
>  	ret = mcp3911_config(adc);
>  	if (ret)
> -		goto clk_disable;
> +		return ret;
>  
>  	indio_dev->name = spi_get_device_id(spi)->name;
>  	indio_dev->modes = INDIO_DIRECT_MODE;
> @@ -322,31 +326,7 @@ static int mcp3911_probe(struct spi_device *spi)
>  
>  	mutex_init(&adc->lock);
>  
> -	ret = iio_device_register(indio_dev);
> -	if (ret)
> -		goto clk_disable;
> -
> -	return ret;
> -
> -clk_disable:
> -	clk_disable_unprepare(adc->clki);
> -reg_disable:
> -	if (adc->vref)
> -		regulator_disable(adc->vref);
> -
> -	return ret;
> -}
> -
> -static void mcp3911_remove(struct spi_device *spi)
> -{
> -	struct iio_dev *indio_dev = spi_get_drvdata(spi);
> -	struct mcp3911 *adc = iio_priv(indio_dev);
> -
> -	iio_device_unregister(indio_dev);
> -
> -	clk_disable_unprepare(adc->clki);
> -	if (adc->vref)
> -		regulator_disable(adc->vref);
> +	return devm_iio_device_register(&adc->spi->dev, indio_dev);
>  }
>  
>  static const struct of_device_id mcp3911_dt_ids[] = {
> @@ -367,7 +347,6 @@ static struct spi_driver mcp3911_driver = {
>  		.of_match_table = mcp3911_dt_ids,
>  	},
>  	.probe = mcp3911_probe,
> -	.remove = mcp3911_remove,
>  	.id_table = mcp3911_id,
>  };
>  module_spi_driver(mcp3911_driver);


  reply	other threads:[~2022-08-20 12:31 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-15  6:16 [PATCH v6 0/9] Improve MCP3911 driver Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 1/9] iio: adc: mcp3911: make use of the sign bit Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 2/9] iio: adc: mcp3911: correct "microchip,device-addr" property Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 3/9] iio: adc: mcp3911: use correct formula for AD conversion Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register Marcus Folkesson
2022-08-20 12:41   ` Jonathan Cameron [this message]
2022-09-12 11:02     ` Marcus Folkesson
2022-09-19 15:36       ` Jonathan Cameron
2022-09-21 20:13         ` Jonathan Cameron
2022-08-15  6:16 ` [PATCH v6 5/9] iio: adc: mcp3911: add support for buffers Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 6/9] iio: adc: mcp3911: add support for interrupts Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 8/9] iio: adc: mcp3911: add support for oversampling ratio Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 9/9] iio: adc: mcp3911: add support to set PGA Marcus Folkesson
2022-08-16 10:22 ` [PATCH v6 0/9] Improve MCP3911 driver Krzysztof Kozlowski
2022-08-16 14:57   ` Marcus Folkesson
2022-08-17  6:12     ` Krzysztof Kozlowski
2022-08-17 16:08 ` Marcus Folkesson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220820134150.2b45339c@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=andy.shevchenko@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kent@minoris.se \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcus.folkesson@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.