[PATCH net-next v4 0/7] add generic PSE support

[PATCH net-next v4 0/7] add generic PSE support

[Oleksij Rempel]

Add generic support for the Ethernet Power Sourcing Equipment.

changes are listed within patches.

Oleksij Rempel (7):
  dt-bindings: net: phy: add PoDL PSE property
  net: add framework to support Ethernet PSE and PDs devices
  net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
  net: mdiobus: search for PSE nodes by parsing PHY nodes.
  ethtool: add interface to interact with Ethernet Power Equipment
  dt-bindings: net: pse-dt: add bindings for generic PSE controller
  net: pse-pd: add regulator based PSE driver

 .../devicetree/bindings/net/ethernet-phy.yaml |   5 +
 .../bindings/net/pse-pd/pse-regulator.yaml    |  40 ++
 Documentation/networking/ethtool-netlink.rst  |  59 +++
 drivers/net/Kconfig                           |   2 +
 drivers/net/Makefile                          |   1 +
 drivers/net/mdio/fwnode_mdio.c                |  55 ++-
 drivers/net/phy/phy_device.c                  |   2 +
 drivers/net/pse-pd/Kconfig                    |  22 ++
 drivers/net/pse-pd/Makefile                   |   6 +
 drivers/net/pse-pd/pse_core.c                 | 363 ++++++++++++++++++
 drivers/net/pse-pd/pse_regulator.c            | 148 +++++++
 include/linux/phy.h                           |   2 +
 include/linux/pse-pd/pse.h                    | 155 ++++++++
 include/uapi/linux/ethtool.h                  |  45 +++
 include/uapi/linux/ethtool_netlink.h          |  17 +
 net/ethtool/Makefile                          |   3 +-
 net/ethtool/common.h                          |   1 +
 net/ethtool/netlink.c                         |  19 +
 net/ethtool/netlink.h                         |   4 +
 net/ethtool/pse-pd.c                          | 178 +++++++++
 20 files changed, 1115 insertions(+), 12 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/pse-pd/pse-regulator.yaml
 create mode 100644 drivers/net/pse-pd/Kconfig
 create mode 100644 drivers/net/pse-pd/Makefile
 create mode 100644 drivers/net/pse-pd/pse_core.c
 create mode 100644 drivers/net/pse-pd/pse_regulator.c
 create mode 100644 include/linux/pse-pd/pse.h
 create mode 100644 net/ethtool/pse-pd.c

-- 
2.30.2

[PATCH net-next v4 1/7] dt-bindings: net: phy: add PoDL PSE property

[Oleksij Rempel]

Add property to reference node representing a PoDL Power Sourcing Equipment.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 Documentation/devicetree/bindings/net/ethernet-phy.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index ed1415a4381f2..0b7b9dc69d454 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -144,6 +144,11 @@ properties:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
+  ieee802.3-pse:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies a reference to a node representing a Power Sourcing Equipment.
+
   phy-is-integrated:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
-- 
2.30.2

[PATCH net-next v4 2/7] net: add framework to support Ethernet PSE and PDs devices

[Oleksij Rempel]

This framework was create with intention to provide support for Ethernet PSE
(Power Sourcing Equipment) and PDs (Powered Device).

At current step this patch implements generic PSE support for PoDL (Power over
Data Lines 802.3bu) specification with reserving name space for PD devices as
well.

This framework can be extended to support 802.3af and 802.3at "Power via the
Media Dependent Interface" (or PoE/Power over Ethernet)

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
changes v4:
- add Reviewed-by: Andrew Lunn
changes v2:
- remove ethtool interface support from this patch
---
 drivers/net/Kconfig           |   2 +
 drivers/net/Makefile          |   1 +
 drivers/net/pse-pd/Kconfig    |  11 ++
 drivers/net/pse-pd/Makefile   |   4 +
 drivers/net/pse-pd/pse_core.c | 294 ++++++++++++++++++++++++++++++++++
 include/linux/pse-pd/pse.h    |  93 +++++++++++
 6 files changed, 405 insertions(+)
 create mode 100644 drivers/net/pse-pd/Kconfig
 create mode 100644 drivers/net/pse-pd/Makefile
 create mode 100644 drivers/net/pse-pd/pse_core.c
 create mode 100644 include/linux/pse-pd/pse.h

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 94c889802566a..15d4a38b1351d 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -500,6 +500,8 @@ config NET_SB1000
 
 source "drivers/net/phy/Kconfig"
 
+source "drivers/net/pse-pd/Kconfig"
+
 source "drivers/net/can/Kconfig"
 
 source "drivers/net/mctp/Kconfig"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 3f1192d3c52d3..6ce076462dbfd 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_NET) += loopback.o
 obj-$(CONFIG_NETDEV_LEGACY_INIT) += Space.o
 obj-$(CONFIG_NETCONSOLE) += netconsole.o
 obj-y += phy/
+obj-y += pse-pd/
 obj-y += mdio/
 obj-y += pcs/
 obj-$(CONFIG_RIONET) += rionet.o
diff --git a/drivers/net/pse-pd/Kconfig b/drivers/net/pse-pd/Kconfig
new file mode 100644
index 0000000000000..49c7f0bcff526
--- /dev/null
+++ b/drivers/net/pse-pd/Kconfig
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Ethernet Power Sourcing Equipment drivers
+#
+
+menuconfig PSE_CONTROLLER
+	bool "Ethernet Power Sourcing Equipment Support"
+	help
+	  Generic Power Sourcing Equipment Controller support.
+
+	  If unsure, say no.
diff --git a/drivers/net/pse-pd/Makefile b/drivers/net/pse-pd/Makefile
new file mode 100644
index 0000000000000..cfa780c7801dd
--- /dev/null
+++ b/drivers/net/pse-pd/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Makefile for Linux PSE drivers
+
+obj-$(CONFIG_PSE_CONTROLLER) += pse_core.o
diff --git a/drivers/net/pse-pd/pse_core.c b/drivers/net/pse-pd/pse_core.c
new file mode 100644
index 0000000000000..7bf3acc721c0a
--- /dev/null
+++ b/drivers/net/pse-pd/pse_core.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Framework for Ethernet Power Sourcing Equipment
+//
+// Copyright (c) 2022 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+//
+
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/pse-pd/pse.h>
+
+static DEFINE_MUTEX(pse_list_mutex);
+static LIST_HEAD(pse_controller_list);
+
+/**
+ * struct pse_control - a PSE control
+ * @pcdev: a pointer to the PSE controller device
+ *         this PSE control belongs to
+ * @list: list entry for the pcdev's PSE controller list
+ * @id: ID of the PSE line in the PSE controller device
+ * @refcnt: Number of gets of this pse_control
+ */
+struct pse_control {
+	struct pse_controller_dev *pcdev;
+	struct list_head list;
+	unsigned int id;
+	struct kref refcnt;
+};
+
+/**
+ * of_pse_zero_xlate - dummy function for controllers with one only control
+ * @pcdev: a pointer to the PSE controller device
+ * @pse_spec: PSE line specifier as found in the device tree
+ *
+ * This static translation function is used by default if of_xlate in
+ * :c:type:`pse_controller_dev` is not set. It is useful for all PSE
+ * controllers with #pse-cells = <0>.
+ */
+static int of_pse_zero_xlate(struct pse_controller_dev *pcdev,
+			     const struct of_phandle_args *pse_spec)
+{
+	return 0;
+}
+
+/**
+ * of_pse_simple_xlate - translate pse_spec to the PSE line number
+ * @pcdev: a pointer to the PSE controller device
+ * @pse_spec: PSE line specifier as found in the device tree
+ *
+ * This static translation function is used by default if of_xlate in
+ * :c:type:`pse_controller_dev` is not set. It is useful for all PSE
+ * controllers with 1:1 mapping, where PSE lines can be indexed by number
+ * without gaps.
+ */
+static int of_pse_simple_xlate(struct pse_controller_dev *pcdev,
+			       const struct of_phandle_args *pse_spec)
+{
+	if (pse_spec->args[0] >= pcdev->nr_lines)
+		return -EINVAL;
+
+	return pse_spec->args[0];
+}
+
+/**
+ * pse_controller_register - register a PSE controller device
+ * @pcdev: a pointer to the initialized PSE controller device
+ */
+int pse_controller_register(struct pse_controller_dev *pcdev)
+{
+	if (!pcdev->of_xlate) {
+		if (pcdev->of_pse_n_cells == 0)
+			pcdev->of_xlate = of_pse_zero_xlate;
+		else if (pcdev->of_pse_n_cells == 1)
+			pcdev->of_xlate = of_pse_simple_xlate;
+	}
+
+	mutex_init(&pcdev->lock);
+	INIT_LIST_HEAD(&pcdev->pse_control_head);
+
+	mutex_lock(&pse_list_mutex);
+	list_add(&pcdev->list, &pse_controller_list);
+	mutex_unlock(&pse_list_mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pse_controller_register);
+
+/**
+ * pse_controller_unregister - unregister a PSE controller device
+ * @pcdev: a pointer to the PSE controller device
+ */
+void pse_controller_unregister(struct pse_controller_dev *pcdev)
+{
+	mutex_lock(&pse_list_mutex);
+	list_del(&pcdev->list);
+	mutex_unlock(&pse_list_mutex);
+}
+EXPORT_SYMBOL_GPL(pse_controller_unregister);
+
+static void devm_pse_controller_release(struct device *dev, void *res)
+{
+	pse_controller_unregister(*(struct pse_controller_dev **)res);
+}
+
+/**
+ * devm_pse_controller_register - resource managed pse_controller_register()
+ * @dev: device that is registering this PSE controller
+ * @pcdev: a pointer to the initialized PSE controller device
+ *
+ * Managed pse_controller_register(). For PSE controllers registered by
+ * this function, pse_controller_unregister() is automatically called on
+ * driver detach. See pse_controller_register() for more information.
+ */
+int devm_pse_controller_register(struct device *dev,
+				 struct pse_controller_dev *pcdev)
+{
+	struct pse_controller_dev **pcdevp;
+	int ret;
+
+	pcdevp = devres_alloc(devm_pse_controller_release, sizeof(*pcdevp),
+			      GFP_KERNEL);
+	if (!pcdevp)
+		return -ENOMEM;
+
+	ret = pse_controller_register(pcdev);
+	if (ret) {
+		devres_free(pcdevp);
+		return ret;
+	}
+
+	*pcdevp = pcdev;
+	devres_add(dev, pcdevp);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devm_pse_controller_register);
+
+/* PSE control section */
+
+static void __pse_control_release(struct kref *kref)
+{
+	struct pse_control *psec = container_of(kref, struct pse_control,
+						  refcnt);
+
+	lockdep_assert_held(&pse_list_mutex);
+
+	module_put(psec->pcdev->owner);
+
+	list_del(&psec->list);
+	kfree(psec);
+}
+
+static void __pse_control_put_internal(struct pse_control *psec)
+{
+	lockdep_assert_held(&pse_list_mutex);
+
+	kref_put(&psec->refcnt, __pse_control_release);
+}
+
+/**
+ * pse_control_put - free the PSE control
+ * @psec: PSE control pointer
+ */
+void pse_control_put(struct pse_control *psec)
+{
+	if (IS_ERR_OR_NULL(psec))
+		return;
+
+	mutex_lock(&pse_list_mutex);
+	__pse_control_put_internal(psec);
+	mutex_unlock(&pse_list_mutex);
+}
+EXPORT_SYMBOL_GPL(pse_control_put);
+
+static struct pse_control *
+pse_control_get_internal(struct pse_controller_dev *pcdev, unsigned int index)
+{
+	struct pse_control *psec;
+
+	lockdep_assert_held(&pse_list_mutex);
+
+	list_for_each_entry(psec, &pcdev->pse_control_head, list) {
+		if (psec->id == index) {
+			kref_get(&psec->refcnt);
+			return psec;
+		}
+	}
+
+	psec = kzalloc(sizeof(*psec), GFP_KERNEL);
+	if (!psec)
+		return ERR_PTR(-ENOMEM);
+
+	if (!try_module_get(pcdev->owner)) {
+		kfree(psec);
+		return ERR_PTR(-ENODEV);
+	}
+
+	psec->pcdev = pcdev;
+	list_add(&psec->list, &pcdev->pse_control_head);
+	psec->id = index;
+	kref_init(&psec->refcnt);
+
+	return psec;
+}
+
+struct pse_control *
+of_pse_control_get(struct device_node *node)
+{
+	struct pse_controller_dev *r, *pcdev;
+	struct of_phandle_args args;
+	struct pse_control *psec;
+	int psec_id;
+	int ret;
+
+	if (!node)
+		return ERR_PTR(-EINVAL);
+
+	ret = of_parse_phandle_with_args(node, "ieee802.3-pse",
+					 "#pse-cells", 0, &args);
+	if (ret)
+		return ERR_PTR(ret);
+
+	mutex_lock(&pse_list_mutex);
+	pcdev = NULL;
+	list_for_each_entry(r, &pse_controller_list, list) {
+		if (args.np == r->dev->of_node) {
+			pcdev = r;
+			break;
+		}
+	}
+
+	if (!pcdev) {
+		psec = ERR_PTR(-EPROBE_DEFER);
+		goto out;
+	}
+
+	if (WARN_ON(args.args_count != pcdev->of_pse_n_cells)) {
+		psec = ERR_PTR(-EINVAL);
+		goto out;
+	}
+
+	psec_id = pcdev->of_xlate(pcdev, &args);
+	if (psec_id < 0) {
+		psec = ERR_PTR(psec_id);
+		goto out;
+	}
+
+	/* pse_list_mutex also protects the pcdev's pse_control list */
+	psec = pse_control_get_internal(pcdev, psec_id);
+
+out:
+	mutex_unlock(&pse_list_mutex);
+	of_node_put(args.np);
+
+	return psec;
+}
+EXPORT_SYMBOL_GPL(of_pse_control_get);
+
+struct pse_control *pse_control_get(struct device *dev)
+{
+	if (!dev->of_node)
+		return ERR_PTR(-ENODEV);
+
+	return of_pse_control_get(dev->of_node);
+}
+EXPORT_SYMBOL_GPL(pse_control_get);
+
+static void devm_pse_control_release(struct device *dev, void *res)
+{
+	pse_control_put(*(struct pse_control **)res);
+}
+
+struct pse_control *
+devm_pse_control_get(struct device *dev)
+{
+	struct pse_control **ptr, *psec;
+
+	ptr = devres_alloc(devm_pse_control_release, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	psec = pse_control_get(dev);
+	if (IS_ERR_OR_NULL(psec)) {
+		devres_free(ptr);
+		return psec;
+	}
+
+	*ptr = psec;
+	devres_add(dev, ptr);
+
+	return psec;
+}
+EXPORT_SYMBOL_GPL(devm_pse_control_get);
diff --git a/include/linux/pse-pd/pse.h b/include/linux/pse-pd/pse.h
new file mode 100644
index 0000000000000..8bf84288db418
--- /dev/null
+++ b/include/linux/pse-pd/pse.h
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+// Copyright (c) 2022 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+ */
+#ifndef _LINUX_PSE_CONTROLLER_H
+#define _LINUX_PSE_CONTROLLER_H
+
+#include <linux/ethtool.h>
+#include <linux/list.h>
+#include <uapi/linux/ethtool.h>
+
+struct module;
+struct device_node;
+struct of_phandle_args;
+struct pse_control;
+
+/**
+ * struct pse_controller_dev - PSE controller entity that might
+ *                             provide multiple PSE controls
+ * @ops: a pointer to device specific struct pse_controller_ops
+ * @owner: kernel module of the PSE controller driver
+ * @list: internal list of PSE controller devices
+ * @pse_control_head: head of internal list of requested PSE controls
+ * @dev: corresponding driver model device struct
+ * @of_pse_n_cells: number of cells in PSE line specifiers
+ * @of_xlate: translation function to translate from specifier as found in the
+ *            device tree to id as given to the PSE control ops
+ * @nr_lines: number of PSE controls in this controller device
+ */
+struct pse_controller_dev {
+	const struct pse_controller_ops *ops;
+	struct module *owner;
+	struct list_head list;
+	struct list_head pse_control_head;
+	struct device *dev;
+	int of_pse_n_cells;
+	int (*of_xlate)(struct pse_controller_dev *pcdev,
+			const struct of_phandle_args *pse_spec);
+	unsigned int nr_lines;
+	struct mutex lock;
+};
+
+#if IS_ENABLED(CONFIG_PSE_CONTROLLER)
+int pse_controller_register(struct pse_controller_dev *pcdev);
+void pse_controller_unregister(struct pse_controller_dev *pcdev);
+struct device;
+int devm_pse_controller_register(struct device *dev,
+				 struct pse_controller_dev *pcdev);
+
+struct pse_control *pse_control_get(struct device *dev);
+struct pse_control *devm_pse_control_get( struct device *dev);
+struct pse_control *of_pse_control_get(struct device_node *node);
+void pse_control_put(struct pse_control *psec);
+
+#else
+
+static inline int pse_controller_register(struct pse_controller_dev *pcdev)
+{
+	return -ENOTSUPP;
+}
+
+static inline void pse_controller_unregister(struct pse_controller_dev *pcdev)
+{
+}
+
+static inline int devm_pse_controller_register(struct device *dev,
+						 struct pse_controller_dev *pcdev)
+{
+	return -ENOTSUPP;
+}
+
+static inline struct pse_control *pse_control_get(struct device *dev)
+{
+	return ERR_PTR(-ENOTSUPP);
+}
+
+static inline struct pse_control *devm_pse_control_get( struct device *dev)
+{
+	return ERR_PTR(-ENOTSUPP);
+}
+
+static inline struct pse_control *of_pse_control_get(struct device_node *node)
+{
+	return ERR_PTR(-ENOTSUPP);
+}
+
+static inline void pse_control_put(struct pse_control *psec)
+{
+}
+
+#endif
+
+#endif
-- 
2.30.2

[PATCH net-next v4 3/7] net: mdiobus: fwnode_mdiobus_register_phy() rework error handling

[Oleksij Rempel]

Rework error handling as preparation for PSE patch. This patch should
make it easier to extend this function.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
changes v4
- add Reviewed-by: Andrew Lunn
---
 drivers/net/mdio/fwnode_mdio.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
index 3e79c2c519298..e78ad55c0e091 100644
--- a/drivers/net/mdio/fwnode_mdio.c
+++ b/drivers/net/mdio/fwnode_mdio.c
@@ -108,8 +108,8 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 	else
 		phy = phy_device_create(bus, addr, phy_id, 0, NULL);
 	if (IS_ERR(phy)) {
-		unregister_mii_timestamper(mii_ts);
-		return PTR_ERR(phy);
+		rc = PTR_ERR(phy);
+		goto clean_mii_ts;
 	}
 
 	if (is_acpi_node(child)) {
@@ -123,17 +123,13 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 		/* All data is now stored in the phy struct, so register it */
 		rc = phy_device_register(phy);
 		if (rc) {
-			phy_device_free(phy);
 			fwnode_handle_put(phy->mdio.dev.fwnode);
-			return rc;
+			goto clean_phy;
 		}
 	} else if (is_of_node(child)) {
 		rc = fwnode_mdiobus_phy_device_register(bus, phy, child, addr);
-		if (rc) {
-			unregister_mii_timestamper(mii_ts);
-			phy_device_free(phy);
-			return rc;
-		}
+		if (rc)
+			goto clean_phy;
 	}
 
 	/* phy->mii_ts may already be defined by the PHY driver. A
@@ -143,5 +139,12 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 	if (mii_ts)
 		phy->mii_ts = mii_ts;
 	return 0;
+
+clean_phy:
+	phy_device_free(phy);
+clean_mii_ts:
+	unregister_mii_timestamper(mii_ts);
+
+	return rc;
 }
 EXPORT_SYMBOL(fwnode_mdiobus_register_phy);
-- 
2.30.2

[PATCH net-next v4 4/7] net: mdiobus: search for PSE nodes by parsing PHY nodes.

[Oleksij Rempel]

Some PHYs can be linked with PSE (Power Sourcing Equipment), so search
for related nodes and attach it to the phydev.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
changes v4:
- add Reviewed-by: Andrew Lunn
- put pse_control_put() after unregister_mii_timestamper()
changes v3
- remove is_acpi_node() check
- rework fwnode_find_pse_control() error handling
---
 drivers/net/mdio/fwnode_mdio.c | 34 ++++++++++++++++++++++++++++++++--
 drivers/net/phy/phy_device.c   |  2 ++
 include/linux/phy.h            |  2 ++
 3 files changed, 36 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
index e78ad55c0e091..8e8296964c4e6 100644
--- a/drivers/net/mdio/fwnode_mdio.c
+++ b/drivers/net/mdio/fwnode_mdio.c
@@ -10,10 +10,28 @@
 #include <linux/fwnode_mdio.h>
 #include <linux/of.h>
 #include <linux/phy.h>
+#include <linux/pse-pd/pse.h>
 
 MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>");
 MODULE_LICENSE("GPL");
 
+static struct pse_control *
+fwnode_find_pse_control(struct fwnode_handle *fwnode)
+{
+	struct pse_control *psec;
+	struct device_node *np;
+
+	np = to_of_node(fwnode);
+	if (!np)
+		return NULL;
+
+	psec = of_pse_control_get(np);
+	if (PTR_ERR(psec) == -ENOENT)
+		return NULL;
+
+	return psec;
+}
+
 static struct mii_timestamper *
 fwnode_find_mii_timestamper(struct fwnode_handle *fwnode)
 {
@@ -89,14 +107,21 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 				struct fwnode_handle *child, u32 addr)
 {
 	struct mii_timestamper *mii_ts = NULL;
+	struct pse_control *psec = NULL;
 	struct phy_device *phy;
 	bool is_c45 = false;
 	u32 phy_id;
 	int rc;
 
+	psec = fwnode_find_pse_control(child);
+	if (IS_ERR(psec))
+		return PTR_ERR(psec);
+
 	mii_ts = fwnode_find_mii_timestamper(child);
-	if (IS_ERR(mii_ts))
-		return PTR_ERR(mii_ts);
+	if (IS_ERR(mii_ts)) {
+		rc = PTR_ERR(mii_ts);
+		goto clean_pse;
+	}
 
 	rc = fwnode_property_match_string(child, "compatible",
 					  "ethernet-phy-ieee802.3-c45");
@@ -132,18 +157,23 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 			goto clean_phy;
 	}
 
+	phy->psec = psec;
+
 	/* phy->mii_ts may already be defined by the PHY driver. A
 	 * mii_timestamper probed via the device tree will still have
 	 * precedence.
 	 */
 	if (mii_ts)
 		phy->mii_ts = mii_ts;
+
 	return 0;
 
 clean_phy:
 	phy_device_free(phy);
 clean_mii_ts:
 	unregister_mii_timestamper(mii_ts);
+clean_pse:
+	pse_control_put(psec);
 
 	return rc;
 }
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 12ff276b80aed..e54b7200ad211 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -26,6 +26,7 @@
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 #include <linux/phy_led_triggers.h>
+#include <linux/pse-pd/pse.h>
 #include <linux/property.h>
 #include <linux/sfp.h>
 #include <linux/skbuff.h>
@@ -989,6 +990,7 @@ EXPORT_SYMBOL(phy_device_register);
 void phy_device_remove(struct phy_device *phydev)
 {
 	unregister_mii_timestamper(phydev->mii_ts);
+	pse_control_put(phydev->psec);
 
 	device_del(&phydev->mdio.dev);
 
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 7c49ab95441b1..472df77935ec6 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -592,6 +592,7 @@ struct macsec_ops;
  * @master_slave_get: Current master/slave advertisement
  * @master_slave_state: Current master/slave configuration
  * @mii_ts: Pointer to time stamper callbacks
+ * @psec: Pointer to Power Sourcing Equipment control struct
  * @lock:  Mutex for serialization access to PHY
  * @state_queue: Work queue for state machine
  * @shared: Pointer to private data shared by phys in one package
@@ -705,6 +706,7 @@ struct phy_device {
 	struct phylink *phylink;
 	struct net_device *attached_dev;
 	struct mii_timestamper *mii_ts;
+	struct pse_control *psec;
 
 	u8 mdix;
 	u8 mdix_ctrl;
-- 
2.30.2

[PATCH net-next v4 5/7] ethtool: add interface to interact with Ethernet Power Equipment

[Oleksij Rempel]

Add interface to support Power Sourcing Equipment. At current step it
provides generic way to address all variants of PSE devices as defined
in IEEE 802.3-2018 but support only objects specified for IEEE 802.3-2018 104.4
PoDL Power Sourcing Equipment (PSE).

Currently supported and mandatory objects are:
IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus
IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState
IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl

This is minimal interface needed to control PSE on each separate
ethernet port but it provides not all mandatory objects specified in
IEEE 802.3-2018.

Since "PoDL PSE" and "PSE" have similar names, but some different values
I decide to not merge them and keep separate naming schema. This should
allow as to be as close to IEEE 802.3 spec as possible and avoid name
conflicts in the future.

This implementation is connected to PHYs instead of MACs because PSE
auto classification can potentially interfere with PHY auto negotiation.
So, may be some extra PHY related initialization will be needed.

With WIP version of ethtools interaction with PSE capable link looks
as following:

$ ip l
...
5: t1l1@eth0: <BROADCAST,MULTICAST> ..
...

$ ethtool --show-pse t1l1
PSE attributs for t1l1:
PoDL PSE Admin State: disabled
PoDL PSE Power Detection Status: disabled

$ ethtool --set-pse t1l1 podl-pse-admin-control enable
$ ethtool --show-pse t1l1
PSE attributs for t1l1:
PoDL PSE Admin State: enabled
PoDL PSE Power Detection Status: delivering power

Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
changes v3:
- drop ethtool_set_ethtool_pse_ops()
- remove todo artifact
- remove ETHTOOL_PODL_PSE_*_COUNT, enums
- fix kdoc warnings

changes v2:
- rework PSE ethtool API. Reduce it to get_status and set_config cbs
- remove phydev locking. Use PSE own locking instead.
---
 Documentation/networking/ethtool-netlink.rst |  59 ++++++
 drivers/net/pse-pd/pse_core.c                |  69 +++++++
 include/linux/pse-pd/pse.h                   |  62 +++++++
 include/uapi/linux/ethtool.h                 |  45 +++++
 include/uapi/linux/ethtool_netlink.h         |  17 ++
 net/ethtool/Makefile                         |   3 +-
 net/ethtool/common.h                         |   1 +
 net/ethtool/netlink.c                        |  19 ++
 net/ethtool/netlink.h                        |   4 +
 net/ethtool/pse-pd.c                         | 178 +++++++++++++++++++
 10 files changed, 456 insertions(+), 1 deletion(-)
 create mode 100644 net/ethtool/pse-pd.c

diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index dbca3e9ec782f..12093324545d8 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -220,6 +220,8 @@ Userspace to kernel:
   ``ETHTOOL_MSG_PHC_VCLOCKS_GET``       get PHC virtual clocks info
   ``ETHTOOL_MSG_MODULE_SET``            set transceiver module parameters
   ``ETHTOOL_MSG_MODULE_GET``            get transceiver module parameters
+  ``ETHTOOL_MSG_PSE_SET``               set PSE parameters
+  ``ETHTOOL_MSG_PSE_GET``               get PSE parameters
   ===================================== =================================
 
 Kernel to userspace:
@@ -260,6 +262,7 @@ Kernel to userspace:
   ``ETHTOOL_MSG_STATS_GET_REPLY``          standard statistics
   ``ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY``    PHC virtual clocks info
   ``ETHTOOL_MSG_MODULE_GET_REPLY``         transceiver module parameters
+  ``ETHTOOL_MSG_PSE_GET_REPLY``            PSE parameters
   ======================================== =================================
 
 ``GET`` requests are sent by userspace applications to retrieve device
@@ -1625,6 +1628,62 @@ For SFF-8636 modules, low power mode is forced by the host according to table
 For CMIS modules, low power mode is forced by the host according to table 6-12
 in revision 5.0 of the specification.
 
+PSE_GET
+=======
+
+Gets PSE attributes.
+
+Request contents:
+
+  =====================================  ======  ==========================
+  ``ETHTOOL_A_PSE_HEADER``               nested  request header
+  =====================================  ======  ==========================
+
+Kernel response contents:
+
+  ======================================  ======  =============================
+  ``ETHTOOL_A_PSE_HEADER``                nested  reply header
+  ``ETHTOOL_A_PODL_PSE_ADMIN_STATE``          u8  Operational state of the PoDL
+                                                  PSE functions
+  ``ETHTOOL_A_PODL_PSE_PW_D_STATUS``          u8  power detection status of the
+                                                  PoDL PSE.
+  ======================================  ======  =============================
+
+When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies
+the operational state of the PoDL PSE functions.  The operational state of the
+PSE function can be changed using the ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL``
+action. This option is corresponding to IEEE 802.3-2018 30.15.1.1.2
+aPoDLPSEAdminState. Possible values are:
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+    :identifiers: ethtool_podl_pse_admin_state
+
+When set, the optional ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` attribute identifies
+the power detection status of the PoDL PSE.  The status depend on internal PSE
+state machine and automatic PD classification support. This option is
+corresponding to IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus.
+Possible values are:
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+    :identifiers: ethtool_podl_pse_pw_d_status
+
+PSE_SET
+=======
+
+Sets PSE parameters.
+
+Request contents:
+
+  ======================================  ======  =============================
+  ``ETHTOOL_A_PSE_HEADER``                nested  request header
+  ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL``        u8  Control PoDL PSE Admin state
+  ======================================  ======  =============================
+
+When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used
+to control PoDL PSE Admin functions. This option is implementing
+IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl. See
+``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` for supported values.
+
 Request translation
 ===================
 
diff --git a/drivers/net/pse-pd/pse_core.c b/drivers/net/pse-pd/pse_core.c
index 7bf3acc721c0a..6d7f8bd874337 100644
--- a/drivers/net/pse-pd/pse_core.c
+++ b/drivers/net/pse-pd/pse_core.c
@@ -292,3 +292,72 @@ devm_pse_control_get(struct device *dev)
 	return psec;
 }
 EXPORT_SYMBOL_GPL(devm_pse_control_get);
+
+/**
+ * pse_ethtool_get_status - get status of PSE control
+ * @psec: PSE control pointer
+ * @extack: extack for reporting useful error messages
+ */
+int pse_ethtool_get_status(struct pse_control *psec,
+			   struct netlink_ext_ack *extack,
+			   struct pse_control_status *status)
+{
+	const struct pse_controller_ops *ops;
+	int err;
+
+	if (!psec)
+		return 0;
+
+	if (WARN_ON(IS_ERR(psec)))
+		return -EINVAL;
+
+	ops = psec->pcdev->ops;
+
+	if (!ops->ethtool_get_status) {
+		NL_SET_ERR_MSG(extack,
+			       "PSE driver does not support status report");
+		return -EOPNOTSUPP;
+	}
+
+	mutex_lock(&psec->pcdev->lock);
+	err = ops->ethtool_get_status(psec->pcdev, psec->id, extack, status);
+	mutex_unlock(&psec->pcdev->lock);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(pse_ethtool_get_status);
+
+/**
+ * pse_ethtool_set_config - set PSE control configuration
+ * @psec: PSE control pointer
+ * @extack: extack for reporting useful error messages
+ * @config: Configuration of the test to run
+ */
+int pse_ethtool_set_config(struct pse_control *psec,
+			   struct netlink_ext_ack *extack,
+			   const struct pse_control_config *config)
+{
+	const struct pse_controller_ops *ops;
+	int err;
+
+	if (!psec)
+		return 0;
+
+	if (WARN_ON(IS_ERR(psec)))
+		return -EINVAL;
+
+	ops = psec->pcdev->ops;
+
+	if (!ops->ethtool_set_config) {
+		NL_SET_ERR_MSG(extack,
+			       "PSE driver does not configuration");
+		return -EOPNOTSUPP;
+	}
+
+	mutex_lock(&psec->pcdev->lock);
+	err = ops->ethtool_set_config(psec->pcdev, psec->id, extack, config);
+	mutex_unlock(&psec->pcdev->lock);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(pse_ethtool_set_config);
diff --git a/include/linux/pse-pd/pse.h b/include/linux/pse-pd/pse.h
index 8bf84288db418..7ef66eeb32d03 100644
--- a/include/linux/pse-pd/pse.h
+++ b/include/linux/pse-pd/pse.h
@@ -9,6 +9,47 @@
 #include <linux/list.h>
 #include <uapi/linux/ethtool.h>
 
+struct phy_device;
+struct pse_controller_dev;
+
+/**
+ * struct pse_control_config - PSE control/channel configuration.
+ *
+ * @admin_cotrol: set PoDL PSE admin control as described in
+ *	IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl
+ */
+struct pse_control_config {
+	enum ethtool_podl_pse_admin_state admin_cotrol;
+};
+
+/**
+ * struct pse_control_status - PSE control/channel status.
+ *
+ * @admin_state: operational state of the PoDL PSE
+ *	functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState
+ * @pw_status: power detection status of the PoDL PSE.
+ *	IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus:
+ */
+struct pse_control_status {
+	enum ethtool_podl_pse_admin_state podl_admin_state;
+	enum ethtool_podl_pse_pw_d_status podl_pw_status;
+};
+
+/**
+ * struct pse_controller_ops - PSE controller driver callbacks
+ *
+ * @get_status: get PSE control status for ethtool interface
+ * @set_config: set PSE control configuration over ethtool interface
+ */
+struct pse_controller_ops {
+	int (*ethtool_get_status)(struct pse_controller_dev *pcdev,
+		unsigned long id, struct netlink_ext_ack *extack,
+		struct pse_control_status *status);
+	int (*ethtool_set_config)(struct pse_controller_dev *pcdev,
+		unsigned long id, struct netlink_ext_ack *extack,
+		const struct pse_control_config *config);
+};
+
 struct module;
 struct device_node;
 struct of_phandle_args;
@@ -52,6 +93,13 @@ struct pse_control *devm_pse_control_get( struct device *dev);
 struct pse_control *of_pse_control_get(struct device_node *node);
 void pse_control_put(struct pse_control *psec);
 
+int pse_ethtool_get_status(struct pse_control *psec,
+			   struct netlink_ext_ack *extack,
+			   struct pse_control_status *status);
+int pse_ethtool_set_config(struct pse_control *psec,
+			   struct netlink_ext_ack *extack,
+			   const struct pse_control_config *config);
+
 #else
 
 static inline int pse_controller_register(struct pse_controller_dev *pcdev)
@@ -88,6 +136,20 @@ static inline void pse_control_put(struct pse_control *psec)
 {
 }
 
+int pse_ethtool_get_status(struct pse_control *psec,
+			   struct netlink_ext_ack *extack,
+			   struct pse_control_status *status)
+{
+	return -ENOTSUPP;
+}
+
+int pse_ethtool_set_config(struct pse_control *psec,
+			   struct netlink_ext_ack *extack,
+			   const struct pse_control_config *config)
+{
+	return -ENOTSUPP;
+}
+
 #endif
 
 #endif
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 2d5741fd44bbc..0bb889194251c 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -736,6 +736,51 @@ enum ethtool_module_power_mode {
 	ETHTOOL_MODULE_POWER_MODE_HIGH,
 };
 
+/**
+ * enum ethtool_podl_pse_admin_state - operational state of the PoDL PSE
+ *	functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState
+ * @ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN: state of PoDL PSE functions are
+ * 	unknown
+ * @ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED: PoDL PSE functions are disabled
+ * @ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED: PoDL PSE functions are enabled
+ */
+enum ethtool_podl_pse_admin_state {
+	ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN = 1,
+	ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED,
+	ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED,
+};
+
+/**
+ * enum ethtool_podl_pse_pw_d_status - power detection status of the PoDL PSE.
+ *	IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus:
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_UNKNOWN: PoDL PSE
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED: "The enumeration “disabled” is
+ *	asserted true when the PoDL PSE state diagram variable mr_pse_enable is
+ *	false"
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_SEARCHING: "The enumeration “searching” is
+ *	asserted true when either of the PSE state diagram variables
+ *	pi_detecting or pi_classifying is true."
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING: "The enumeration “deliveringPower”
+ *	is asserted true when the PoDL PSE state diagram variable pi_powered is
+ *	true."
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_SLEEP: "The enumeration “sleep” is asserted
+ *	true when the PoDL PSE state diagram variable pi_sleeping is true."
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_IDLE: "The enumeration “idle” is asserted true
+ *	when the logical combination of the PoDL PSE state diagram variables
+ *	pi_prebiased*!pi_sleeping is true."
+ * @ETHTOOL_PODL_PSE_PW_D_STATUS_ERROR: "The enumeration “error” is asserted
+ *	true when the PoDL PSE state diagram variable overload_held is true."
+ */
+enum ethtool_podl_pse_pw_d_status {
+	ETHTOOL_PODL_PSE_PW_D_STATUS_UNKNOWN = 1,
+	ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED,
+	ETHTOOL_PODL_PSE_PW_D_STATUS_SEARCHING,
+	ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING,
+	ETHTOOL_PODL_PSE_PW_D_STATUS_SLEEP,
+	ETHTOOL_PODL_PSE_PW_D_STATUS_IDLE,
+	ETHTOOL_PODL_PSE_PW_D_STATUS_ERROR,
+};
+
 /**
  * struct ethtool_gstrings - string set for data tagging
  * @cmd: Command number = %ETHTOOL_GSTRINGS
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index d2fb4f7be61b2..1c890a37a35b5 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -49,6 +49,8 @@ enum {
 	ETHTOOL_MSG_PHC_VCLOCKS_GET,
 	ETHTOOL_MSG_MODULE_GET,
 	ETHTOOL_MSG_MODULE_SET,
+	ETHTOOL_MSG_PSE_GET,
+	ETHTOOL_MSG_PSE_SET,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_USER_CNT,
@@ -94,6 +96,8 @@ enum {
 	ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY,
 	ETHTOOL_MSG_MODULE_GET_REPLY,
 	ETHTOOL_MSG_MODULE_NTF,
+	ETHTOOL_MSG_PSE_GET_REPLY,
+	ETHTOOL_MSG_PSE_NTF,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_KERNEL_CNT,
@@ -862,6 +866,19 @@ enum {
 	ETHTOOL_A_MODULE_MAX = (__ETHTOOL_A_MODULE_CNT - 1)
 };
 
+/* Power Sourcing Equipment */
+enum {
+	ETHTOOL_A_PSE_UNSPEC,
+	ETHTOOL_A_PSE_HEADER,			/* nest - _A_HEADER_* */
+	ETHTOOL_A_PODL_PSE_ADMIN_STATE,		/* u8 */
+	ETHTOOL_A_PODL_PSE_ADMIN_CONTROL,	/* u8 */
+	ETHTOOL_A_PODL_PSE_PW_D_STATUS,		/* u8 */
+
+	/* add new constants above here */
+	__ETHTOOL_A_PSE_CNT,
+	ETHTOOL_A_PSE_MAX = (__ETHTOOL_A_PSE_CNT - 1)
+};
+
 /* generic netlink info */
 #define ETHTOOL_GENL_NAME "ethtool"
 #define ETHTOOL_GENL_VERSION 1
diff --git a/net/ethtool/Makefile b/net/ethtool/Makefile
index b76432e70e6ba..72ab0944262af 100644
--- a/net/ethtool/Makefile
+++ b/net/ethtool/Makefile
@@ -7,4 +7,5 @@ obj-$(CONFIG_ETHTOOL_NETLINK)	+= ethtool_nl.o
 ethtool_nl-y	:= netlink.o bitset.o strset.o linkinfo.o linkmodes.o \
 		   linkstate.o debug.o wol.o features.o privflags.o rings.o \
 		   channels.o coalesce.o pause.o eee.o tsinfo.o cabletest.o \
-		   tunnels.o fec.o eeprom.o stats.o phc_vclocks.o module.o
+		   tunnels.o fec.o eeprom.o stats.o phc_vclocks.o module.o \
+		   pse-pd.o
diff --git a/net/ethtool/common.h b/net/ethtool/common.h
index 2dc2b80aea5f5..c1779657e074f 100644
--- a/net/ethtool/common.h
+++ b/net/ethtool/common.h
@@ -46,6 +46,7 @@ int ethtool_get_max_rxfh_channel(struct net_device *dev, u32 *max);
 int __ethtool_get_ts_info(struct net_device *dev, struct ethtool_ts_info *info);
 
 extern const struct ethtool_phy_ops *ethtool_phy_ops;
+extern const struct ethtool_pse_ops *ethtool_pse_ops;
 
 int ethtool_get_module_info_call(struct net_device *dev,
 				 struct ethtool_modinfo *modinfo);
diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c
index e26079e11835c..ec84a12ba4918 100644
--- a/net/ethtool/netlink.c
+++ b/net/ethtool/netlink.c
@@ -286,6 +286,7 @@ ethnl_default_requests[__ETHTOOL_MSG_USER_CNT] = {
 	[ETHTOOL_MSG_STATS_GET]		= &ethnl_stats_request_ops,
 	[ETHTOOL_MSG_PHC_VCLOCKS_GET]	= &ethnl_phc_vclocks_request_ops,
 	[ETHTOOL_MSG_MODULE_GET]	= &ethnl_module_request_ops,
+	[ETHTOOL_MSG_PSE_GET]		= &ethnl_pse_request_ops,
 };
 
 static struct ethnl_dump_ctx *ethnl_dump_context(struct netlink_callback *cb)
@@ -598,6 +599,7 @@ ethnl_default_notify_ops[ETHTOOL_MSG_KERNEL_MAX + 1] = {
 	[ETHTOOL_MSG_EEE_NTF]		= &ethnl_eee_request_ops,
 	[ETHTOOL_MSG_FEC_NTF]		= &ethnl_fec_request_ops,
 	[ETHTOOL_MSG_MODULE_NTF]	= &ethnl_module_request_ops,
+	[ETHTOOL_MSG_PSE_NTF]		= &ethnl_pse_request_ops,
 };
 
 /* default notification handler */
@@ -691,6 +693,7 @@ static const ethnl_notify_handler_t ethnl_notify_handlers[] = {
 	[ETHTOOL_MSG_EEE_NTF]		= ethnl_default_notify,
 	[ETHTOOL_MSG_FEC_NTF]		= ethnl_default_notify,
 	[ETHTOOL_MSG_MODULE_NTF]	= ethnl_default_notify,
+	[ETHTOOL_MSG_PSE_NTF]		= ethnl_default_notify,
 };
 
 void ethtool_notify(struct net_device *dev, unsigned int cmd, const void *data)
@@ -1020,6 +1023,22 @@ static const struct genl_ops ethtool_genl_ops[] = {
 		.policy = ethnl_module_set_policy,
 		.maxattr = ARRAY_SIZE(ethnl_module_set_policy) - 1,
 	},
+	{
+		.cmd	= ETHTOOL_MSG_PSE_GET,
+		.doit	= ethnl_default_doit,
+		.start	= ethnl_default_start,
+		.dumpit	= ethnl_default_dumpit,
+		.done	= ethnl_default_done,
+		.policy = ethnl_pse_get_policy,
+		.maxattr = ARRAY_SIZE(ethnl_pse_get_policy) - 1,
+	},
+	{
+		.cmd	= ETHTOOL_MSG_PSE_SET,
+		.flags	= GENL_UNS_ADMIN_PERM,
+		.doit	= ethnl_set_pse,
+		.policy = ethnl_pse_set_policy,
+		.maxattr = ARRAY_SIZE(ethnl_pse_set_policy) - 1,
+	},
 };
 
 static const struct genl_multicast_group ethtool_nl_mcgrps[] = {
diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h
index c0d5876118546..1bfd374f97188 100644
--- a/net/ethtool/netlink.h
+++ b/net/ethtool/netlink.h
@@ -345,6 +345,7 @@ extern const struct ethnl_request_ops ethnl_module_eeprom_request_ops;
 extern const struct ethnl_request_ops ethnl_stats_request_ops;
 extern const struct ethnl_request_ops ethnl_phc_vclocks_request_ops;
 extern const struct ethnl_request_ops ethnl_module_request_ops;
+extern const struct ethnl_request_ops ethnl_pse_request_ops;
 
 extern const struct nla_policy ethnl_header_policy[ETHTOOL_A_HEADER_FLAGS + 1];
 extern const struct nla_policy ethnl_header_policy_stats[ETHTOOL_A_HEADER_FLAGS + 1];
@@ -383,6 +384,8 @@ extern const struct nla_policy ethnl_stats_get_policy[ETHTOOL_A_STATS_GROUPS + 1
 extern const struct nla_policy ethnl_phc_vclocks_get_policy[ETHTOOL_A_PHC_VCLOCKS_HEADER + 1];
 extern const struct nla_policy ethnl_module_get_policy[ETHTOOL_A_MODULE_HEADER + 1];
 extern const struct nla_policy ethnl_module_set_policy[ETHTOOL_A_MODULE_POWER_MODE_POLICY + 1];
+extern const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1];
+extern const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1];
 
 int ethnl_set_linkinfo(struct sk_buff *skb, struct genl_info *info);
 int ethnl_set_linkmodes(struct sk_buff *skb, struct genl_info *info);
@@ -402,6 +405,7 @@ int ethnl_tunnel_info_start(struct netlink_callback *cb);
 int ethnl_tunnel_info_dumpit(struct sk_buff *skb, struct netlink_callback *cb);
 int ethnl_set_fec(struct sk_buff *skb, struct genl_info *info);
 int ethnl_set_module(struct sk_buff *skb, struct genl_info *info);
+int ethnl_set_pse(struct sk_buff *skb, struct genl_info *info);
 
 extern const char stats_std_names[__ETHTOOL_STATS_CNT][ETH_GSTRING_LEN];
 extern const char stats_eth_phy_names[__ETHTOOL_A_STATS_ETH_PHY_CNT][ETH_GSTRING_LEN];
diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
new file mode 100644
index 0000000000000..ef8ab7676d7a9
--- /dev/null
+++ b/net/ethtool/pse-pd.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// ethtool interface for for Ethernet PSE (Power Sourcing Equipment)
+// and PD (Powered Device)
+//
+// Copyright (c) 2022 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+//
+
+#include "common.h"
+#include "linux/pse-pd/pse.h"
+#include "netlink.h"
+#include <linux/ethtool_netlink.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+struct pse_req_info {
+	struct ethnl_req_info base;
+};
+
+struct pse_reply_data {
+	struct ethnl_reply_data	base;
+	struct pse_control_status status;
+};
+
+#define PSE_REPDATA(__reply_base) \
+	container_of(__reply_base, struct pse_reply_data, base)
+
+/* PSE_GET */
+
+const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1] = {
+	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+};
+
+static int pse_get_pse_attributs(struct net_device *dev,
+				 struct netlink_ext_ack *extack,
+				 struct pse_reply_data *data)
+{
+	struct phy_device *phydev = dev->phydev;
+
+	if (!phydev)
+		return -EOPNOTSUPP;
+
+	if (!phydev->psec)
+		return -EOPNOTSUPP;
+
+	memset(&data->status, 0, sizeof(data->status));
+
+	return pse_ethtool_get_status(phydev->psec, extack, &data->status);
+}
+
+static int pse_prepare_data(const struct ethnl_req_info *req_base,
+			       struct ethnl_reply_data *reply_base,
+			       struct genl_info *info)
+{
+	struct pse_reply_data *data = PSE_REPDATA(reply_base);
+	struct net_device *dev = reply_base->dev;
+	int ret;
+
+	ret = ethnl_ops_begin(dev);
+	if (ret < 0)
+		return 0;
+
+	ret = pse_get_pse_attributs(dev, info->extack, data);
+
+	ethnl_ops_complete(dev);
+
+	return ret;
+}
+
+static int pse_reply_size(const struct ethnl_req_info *req_base,
+			  const struct ethnl_reply_data *reply_base)
+{
+	const struct pse_reply_data *data = PSE_REPDATA(reply_base);
+	const struct pse_control_status *st = &data->status;
+	int len = 0;
+
+	if (st->podl_admin_state >= 0)
+		len += nla_total_size(sizeof(u8)); /* _PODL_PSE_ADMIN_STATE */
+	if (st->podl_pw_status >= 0)
+		len += nla_total_size(sizeof(u8)); /* _PODL_PSE_PW_D_STATUS */
+
+	return len;
+}
+
+static int pse_fill_reply(struct sk_buff *skb,
+			  const struct ethnl_req_info *req_base,
+			  const struct ethnl_reply_data *reply_base)
+{
+	const struct pse_reply_data *data = PSE_REPDATA(reply_base);
+	const struct pse_control_status *st = &data->status;
+
+	if (st->podl_admin_state > 0 &&
+	    nla_put_u8(skb, ETHTOOL_A_PODL_PSE_ADMIN_STATE,
+		       st->podl_admin_state))
+		return -EMSGSIZE;
+
+	if (st->podl_pw_status > 0 &&
+	    nla_put_u8(skb, ETHTOOL_A_PODL_PSE_PW_D_STATUS,
+		       st->podl_pw_status))
+		return -EMSGSIZE;
+
+	return 0;
+}
+
+const struct ethnl_request_ops ethnl_pse_request_ops = {
+	.request_cmd		= ETHTOOL_MSG_PSE_GET,
+	.reply_cmd		= ETHTOOL_MSG_PSE_GET_REPLY,
+	.hdr_attr		= ETHTOOL_A_PSE_HEADER,
+	.req_info_size		= sizeof(struct pse_req_info),
+	.reply_data_size	= sizeof(struct pse_reply_data),
+
+	.prepare_data		= pse_prepare_data,
+	.reply_size		= pse_reply_size,
+	.fill_reply		= pse_fill_reply,
+};
+
+/* PSE_SET */
+
+const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
+	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+	[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] =
+		NLA_POLICY_RANGE(NLA_U8, ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED,
+				 ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED),
+};
+
+static int pse_set_pse_config(struct net_device *dev,
+			      struct netlink_ext_ack *extack,
+			      struct nlattr **tb)
+{
+	struct phy_device *phydev = dev->phydev;
+	struct pse_control_config config = {};
+	int ret;
+
+	/* Optional attribute. Do not return error if not set. */
+	if (!tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL])
+		return 0;
+
+	/* this values are already validated by the ethnl_pse_set_policy */
+	config.admin_cotrol = nla_get_u8(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
+
+	if (!phydev)
+		return -EOPNOTSUPP;
+
+	if (!phydev->psec)
+		ret = -EOPNOTSUPP;
+	else
+		ret = pse_ethtool_set_config(phydev->psec, extack, &config);
+
+	return ret;
+}
+
+int ethnl_set_pse(struct sk_buff *skb, struct genl_info *info)
+{
+	struct ethnl_req_info req_info = {};
+	struct nlattr **tb = info->attrs;
+	struct net_device *dev;
+	int ret;
+
+	ret = ethnl_parse_header_dev_get(&req_info, tb[ETHTOOL_A_PSE_HEADER],
+					 genl_info_net(info), info->extack,
+					 true);
+	if (ret < 0)
+		return ret;
+	dev = req_info.dev;
+
+	rtnl_lock();
+	ret = ethnl_ops_begin(dev);
+	if (ret < 0)
+		goto out_rtnl;
+
+	ret = pse_set_pse_config(dev, info->extack, tb);
+
+	ethnl_ops_complete(dev);
+out_rtnl:
+	rtnl_unlock();
+	ethnl_parse_header_dev_put(&req_info);
+	return ret;
+}
-- 
2.30.2

[PATCH net-next v4 6/7] dt-bindings: net: pse-dt: add bindings for generic PSE controller

[Oleksij Rempel]

Add binding for generic Ethernet PSE controller.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
changes v4:
- rename to PSE regulator
- drop currently unused properties
- use own compatible for PoDL PSE
changes v2:
- rename compatible to more generic "ieee802.3-pse"
- add class and type properties for PoDL and PoE variants
- add pairs property
---
 .../bindings/net/pse-pd/pse-regulator.yaml    | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/pse-pd/pse-regulator.yaml

diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-regulator.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-regulator.yaml
new file mode 100644
index 0000000000000..1a906d2135a7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pse-pd/pse-regulator.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pse-pd/pse-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator based Power Sourcing Equipment
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: Regulator based PSE controller. The device must be referenced by
+  the PHY node to control power injection to the Ethernet cable.
+
+properties:
+  compatible:
+    description: Regulator based PoDL PSE controller for a single twisted-pair
+      link.
+    const: podl-pse-regulator
+
+  '#pse-cells':
+    const: 0
+
+  pse-supply:
+    description: Power supply for the PSE controller
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#pse-cells'
+  - pse-supply
+
+examples:
+  - |
+    pse_t1l2: ethernet-pse-1 {
+      compatible = "podl-pse-regulator";
+      pse-supply = <&reg_t1l1>;
+      #pse-cells = <0>;
+    };
-- 
2.30.2

[PATCH net-next v4 7/7] net: pse-pd: add regulator based PSE driver

[Oleksij Rempel]

Add generic, regulator based PSE driver to support simple Power Sourcing
Equipment without automatic classification support.

This driver was tested on 10Bast-T1L switch with regulator based PoDL PSE.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
changes v4:
- rename to pse_regulator
changes v2:
- add regulator_enable test to the probe
- migrate to the new PSE ethtool API
---
 drivers/net/pse-pd/Kconfig         |  11 +++
 drivers/net/pse-pd/Makefile        |   2 +
 drivers/net/pse-pd/pse_regulator.c | 148 +++++++++++++++++++++++++++++
 3 files changed, 161 insertions(+)
 create mode 100644 drivers/net/pse-pd/pse_regulator.c

diff --git a/drivers/net/pse-pd/Kconfig b/drivers/net/pse-pd/Kconfig
index 49c7f0bcff526..73d163704068a 100644
--- a/drivers/net/pse-pd/Kconfig
+++ b/drivers/net/pse-pd/Kconfig
@@ -9,3 +9,14 @@ menuconfig PSE_CONTROLLER
 	  Generic Power Sourcing Equipment Controller support.
 
 	  If unsure, say no.
+
+if PSE_CONTROLLER
+
+config PSE_REGULATOR
+	tristate "Regulator based PSE controller"
+	help
+	  This module provides support for simple regulator based Ethernet Power
+	  Sourcing Equipment without automatic classification support. For
+	  example for basic implementation of PoDL (802.3bu) specification.
+
+endif
diff --git a/drivers/net/pse-pd/Makefile b/drivers/net/pse-pd/Makefile
index cfa780c7801dd..1b8aa4c70f0b9 100644
--- a/drivers/net/pse-pd/Makefile
+++ b/drivers/net/pse-pd/Makefile
@@ -2,3 +2,5 @@
 # Makefile for Linux PSE drivers
 
 obj-$(CONFIG_PSE_CONTROLLER) += pse_core.o
+
+obj-$(CONFIG_PSE_REGULATOR) += pse_regulator.o
diff --git a/drivers/net/pse-pd/pse_regulator.c b/drivers/net/pse-pd/pse_regulator.c
new file mode 100644
index 0000000000000..46ea5b8215dcd
--- /dev/null
+++ b/drivers/net/pse-pd/pse_regulator.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Driver for the regulator based Ethernet Power Sourcing Equipment, without
+// auto classification support.
+//
+// Copyright (c) 2022 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+//
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pse-pd/pse.h>
+#include <linux/regulator/consumer.h>
+
+struct pse_reg_priv {
+	struct pse_controller_dev pcdev;
+	struct regulator *ps; /*power source */
+	enum ethtool_podl_pse_admin_state admin_state;
+};
+
+static struct pse_reg_priv *to_pse_reg(struct pse_controller_dev *pcdev)
+{
+	return container_of(pcdev, struct pse_reg_priv, pcdev);
+}
+
+static int
+pse_reg_ethtool_set_config(struct pse_controller_dev *pcdev, unsigned long id,
+			   struct netlink_ext_ack *extack,
+			   const struct pse_control_config *config)
+{
+	struct pse_reg_priv *priv = to_pse_reg(pcdev);
+	int ret;
+
+	if (priv->admin_state == config->admin_cotrol)
+		return 0;
+
+	switch (config->admin_cotrol) {
+	case ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED:
+		ret = regulator_enable(priv->ps);
+		break;
+	case ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED:
+		ret = regulator_disable(priv->ps);
+		break;
+	default:
+		dev_err(pcdev->dev, "Unknown admin state %i\n",
+			config->admin_cotrol);
+		ret = -ENOTSUPP;
+	}
+
+	if (ret)
+		return ret;
+
+	priv->admin_state = config->admin_cotrol;
+
+	return 0;
+}
+
+static int
+pse_reg_ethtool_get_status(struct pse_controller_dev *pcdev, unsigned long id,
+			   struct netlink_ext_ack *extack,
+			   struct pse_control_status *status)
+{
+	struct pse_reg_priv *priv = to_pse_reg(pcdev);
+	int ret;
+
+	ret = regulator_is_enabled(priv->ps);
+	if (ret < 0)
+		return ret;
+
+	if (!ret)
+		status->podl_pw_status = ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED;
+	else
+		status->podl_pw_status =
+			ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING;
+
+	status->podl_admin_state = priv->admin_state;
+
+	return 0;
+}
+
+static const struct pse_controller_ops pse_reg_ops = {
+	.ethtool_get_status = pse_reg_ethtool_get_status,
+	.ethtool_set_config = pse_reg_ethtool_set_config,
+};
+
+static int
+pse_reg_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pse_reg_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	if (!pdev->dev.of_node)
+		return -ENOENT;
+
+	priv->ps = devm_regulator_get_exclusive(dev, "pse");
+	if (IS_ERR(priv->ps)) {
+		dev_err(dev, "failed to get PSE regulator (%pe)\n", priv->ps);
+		return PTR_ERR(priv->ps);
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	ret = regulator_is_enabled(priv->ps);
+	if (ret < 0)
+		return ret;
+
+	if (ret)
+		priv->admin_state = ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED;
+	else
+		priv->admin_state = ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED;
+
+	priv->pcdev.owner = THIS_MODULE;
+	priv->pcdev.ops = &pse_reg_ops;
+	priv->pcdev.dev = dev;
+	ret = devm_pse_controller_register(dev, &priv->pcdev);
+	if (ret) {
+		dev_err(dev, "failed to register PSE controller (%pe)\n",
+			ERR_PTR(ret));
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id pse_reg_of_match[] = {
+	{ .compatible = "podl-pse-regulator", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, pse_reg_of_match);
+
+static struct platform_driver pse_reg_driver = {
+	.probe		= pse_reg_probe,
+	.driver		= {
+		.name		= "PSE regulator",
+		.of_match_table = of_match_ptr(pse_reg_of_match),
+	},
+};
+module_platform_driver(pse_reg_driver);
+
+MODULE_AUTHOR("Oleksij Rempel <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("regulator based Ethernet Power Sourcing Equipment");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:pse-regulator");
-- 
2.30.2

Re: [PATCH net-next v4 6/7] dt-bindings: net: pse-dt: add bindings for generic PSE controller

[Krzysztof Kozlowski]

On 28/08/2022 09:30, Oleksij Rempel wrote:
> Add binding for generic Ethernet PSE controller.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> changes v4:
> - rename to PSE regulator
> - drop currently unused properties
> - use own compatible for PoDL PSE
> changes v2:
> - rename compatible to more generic "ieee802.3-pse"
> - add class and type properties for PoDL and PoE variants
> - add pairs property
> ---
>  .../bindings/net/pse-pd/pse-regulator.yaml    | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/pse-pd/pse-regulator.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-regulator.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-regulator.yaml
> new file mode 100644
> index 0000000000000..1a906d2135a7a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/pse-pd/pse-regulator.yaml
> @@ -0,0 +1,40 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/pse-pd/pse-regulator.yaml#

The convention is filename based on compatible, so "podl-pse-regulator.yaml"

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Regulator based Power Sourcing Equipment
> +
> +maintainers:
> +  - Oleksij Rempel <o.rempel@pengutronix.de>
> +
> +description: Regulator based PSE controller. The device must be referenced by
> +  the PHY node to control power injection to the Ethernet cable.
> +
> +properties:
> +  compatible:
> +    description: Regulator based PoDL PSE controller for a single twisted-pair
> +      link.

Why description of compatible? Description of hardware goes to top-level
description.

> +    const: podl-pse-regulator
> +
> +  '#pse-cells':
> +    const: 0
> +
> +  pse-supply:
> +    description: Power supply for the PSE controller
> +
> +additionalProperties: false
> +
> +required:
> +  - compatible
> +  - '#pse-cells'
> +  - pse-supply
> +
> +examples:
> +  - |
> +    pse_t1l2: ethernet-pse-1 {

Node name: ethernet-pse
(unless -1 stands for something generic?)

Also, no need for label.

Best regards,
Krzysztof

Re: [PATCH net-next v4 7/7] net: pse-pd: add regulator based PSE driver

[Krzysztof Kozlowski]

On 28/08/2022 09:30, Oleksij Rempel wrote:
> Add generic, regulator based PSE driver to support simple Power Sourcing
> Equipment without automatic classification support.
> 
> This driver was tested on 10Bast-T1L switch with regulator based PoDL PSE.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> changes v4:
> - rename to pse_regulator
> changes v2:
> - add regulator_enable test to the probe
> - migrate to the new PSE ethtool API
> ---
>  drivers/net/pse-pd/Kconfig         |  11 +++
>  drivers/net/pse-pd/Makefile        |   2 +
>  drivers/net/pse-pd/pse_regulator.c | 148 +++++++++++++++++++++++++++++
>  3 files changed, 161 insertions(+)
>  create mode 100644 drivers/net/pse-pd/pse_regulator.c
> 
> diff --git a/drivers/net/pse-pd/Kconfig b/drivers/net/pse-pd/Kconfig
> index 49c7f0bcff526..73d163704068a 100644
> --- a/drivers/net/pse-pd/Kconfig
> +++ b/drivers/net/pse-pd/Kconfig
> @@ -9,3 +9,14 @@ menuconfig PSE_CONTROLLER
>  	  Generic Power Sourcing Equipment Controller support.
>  
>  	  If unsure, say no.
> +
> +if PSE_CONTROLLER
> +
> +config PSE_REGULATOR
> +	tristate "Regulator based PSE controller"
> +	help
> +	  This module provides support for simple regulator based Ethernet Power
> +	  Sourcing Equipment without automatic classification support. For
> +	  example for basic implementation of PoDL (802.3bu) specification.
> +
> +endif
> diff --git a/drivers/net/pse-pd/Makefile b/drivers/net/pse-pd/Makefile
> index cfa780c7801dd..1b8aa4c70f0b9 100644
> --- a/drivers/net/pse-pd/Makefile
> +++ b/drivers/net/pse-pd/Makefile
> @@ -2,3 +2,5 @@
>  # Makefile for Linux PSE drivers
>  
>  obj-$(CONFIG_PSE_CONTROLLER) += pse_core.o
> +
> +obj-$(CONFIG_PSE_REGULATOR) += pse_regulator.o
> diff --git a/drivers/net/pse-pd/pse_regulator.c b/drivers/net/pse-pd/pse_regulator.c
> new file mode 100644
> index 0000000000000..46ea5b8215dcd
> --- /dev/null
> +++ b/drivers/net/pse-pd/pse_regulator.c
> @@ -0,0 +1,148 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +//
> +// Driver for the regulator based Ethernet Power Sourcing Equipment, without
> +// auto classification support.
> +//
> +// Copyright (c) 2022 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
> +//
> +
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pse-pd/pse.h>
> +#include <linux/regulator/consumer.h>
> +
> +struct pse_reg_priv {
> +	struct pse_controller_dev pcdev;
> +	struct regulator *ps; /*power source */
> +	enum ethtool_podl_pse_admin_state admin_state;
> +};
> +
> +static struct pse_reg_priv *to_pse_reg(struct pse_controller_dev *pcdev)
> +{
> +	return container_of(pcdev, struct pse_reg_priv, pcdev);
> +}
> +
> +static int
> +pse_reg_ethtool_set_config(struct pse_controller_dev *pcdev, unsigned long id,
> +			   struct netlink_ext_ack *extack,
> +			   const struct pse_control_config *config)
> +{
> +	struct pse_reg_priv *priv = to_pse_reg(pcdev);
> +	int ret;
> +
> +	if (priv->admin_state == config->admin_cotrol)
> +		return 0;
> +
> +	switch (config->admin_cotrol) {
> +	case ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED:
> +		ret = regulator_enable(priv->ps);
> +		break;
> +	case ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED:
> +		ret = regulator_disable(priv->ps);
> +		break;
> +	default:
> +		dev_err(pcdev->dev, "Unknown admin state %i\n",
> +			config->admin_cotrol);
> +		ret = -ENOTSUPP;
> +	}
> +
> +	if (ret)
> +		return ret;
> +
> +	priv->admin_state = config->admin_cotrol;
> +
> +	return 0;
> +}
> +
> +static int
> +pse_reg_ethtool_get_status(struct pse_controller_dev *pcdev, unsigned long id,
> +			   struct netlink_ext_ack *extack,
> +			   struct pse_control_status *status)
> +{
> +	struct pse_reg_priv *priv = to_pse_reg(pcdev);
> +	int ret;
> +
> +	ret = regulator_is_enabled(priv->ps);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (!ret)
> +		status->podl_pw_status = ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED;
> +	else
> +		status->podl_pw_status =
> +			ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING;
> +
> +	status->podl_admin_state = priv->admin_state;
> +
> +	return 0;
> +}
> +
> +static const struct pse_controller_ops pse_reg_ops = {
> +	.ethtool_get_status = pse_reg_ethtool_get_status,
> +	.ethtool_set_config = pse_reg_ethtool_set_config,
> +};
> +
> +static int
> +pse_reg_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct pse_reg_priv *priv;
> +	int ret;
> +
> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	if (!pdev->dev.of_node)
> +		return -ENOENT;
> +
> +	priv->ps = devm_regulator_get_exclusive(dev, "pse");
> +	if (IS_ERR(priv->ps)) {
> +		dev_err(dev, "failed to get PSE regulator (%pe)\n", priv->ps);

return dev_err_probe().

> +		return PTR_ERR(priv->ps);
> +	}
> +
> +	platform_set_drvdata(pdev, priv);
> +
> +	ret = regulator_is_enabled(priv->ps);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (ret)
> +		priv->admin_state = ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED;
> +	else
> +		priv->admin_state = ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED;
> +
> +	priv->pcdev.owner = THIS_MODULE;
> +	priv->pcdev.ops = &pse_reg_ops;
> +	priv->pcdev.dev = dev;
> +	ret = devm_pse_controller_register(dev, &priv->pcdev);
> +	if (ret) {
> +		dev_err(dev, "failed to register PSE controller (%pe)\n",
> +			ERR_PTR(ret));

return dev_err_probe()

> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id pse_reg_of_match[] = {
> +	{ .compatible = "podl-pse-regulator", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, pse_reg_of_match);
> +
> +static struct platform_driver pse_reg_driver = {
> +	.probe		= pse_reg_probe,
> +	.driver		= {
> +		.name		= "PSE regulator",
> +		.of_match_table = of_match_ptr(pse_reg_of_match),

You need to compile test it... No of_match_ptr() or add maybe_unused to
the table.

Best regards,
Krzysztof

Re: [PATCH net-next v4 6/7] dt-bindings: net: pse-dt: add bindings for generic PSE controller

[Rob Herring]

On Sun, Aug 28, 2022 at 08:30:20AM +0200, Oleksij Rempel wrote:
> Add binding for generic Ethernet PSE controller.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> changes v4:
> - rename to PSE regulator
> - drop currently unused properties
> - use own compatible for PoDL PSE
> changes v2:
> - rename compatible to more generic "ieee802.3-pse"
> - add class and type properties for PoDL and PoE variants
> - add pairs property
> ---
>  .../bindings/net/pse-pd/pse-regulator.yaml    | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/pse-pd/pse-regulator.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-regulator.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-regulator.yaml
> new file mode 100644
> index 0000000000000..1a906d2135a7a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/pse-pd/pse-regulator.yaml
> @@ -0,0 +1,40 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/pse-pd/pse-regulator.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Regulator based Power Sourcing Equipment
> +
> +maintainers:
> +  - Oleksij Rempel <o.rempel@pengutronix.de>
> +
> +description: Regulator based PSE controller. The device must be referenced by
> +  the PHY node to control power injection to the Ethernet cable.
> +
> +properties:
> +  compatible:
> +    description: Regulator based PoDL PSE controller for a single twisted-pair
> +      link.
> +    const: podl-pse-regulator
> +
> +  '#pse-cells':
> +    const: 0

Do you have intentions that this would be non-zero? This series is 
defining a new common binding, but only creating a specific schema. 
You need to define in a common schema what the purpose of the cells may 
be and if there's common constraints defining those in the common 
schema. There's several examples where only 0 or 1 is allowed for 
example.

There's a standard pattern of '#foo-cells' for the provider and 'foos' 
for the consumer. Ultimately, anything that doesn't follow that pattern 
needs explicit support in dtschema to decode the consumers. IOW, try to 
follow the pattern. Either '#ieee802.3-pse-cells'/'ieee802.3-pses' or 
'#pse-cells'/'pses'. Neither seems great to me. The former is a bit too 
specific and the latter a bit too short. Shrug.

Rob

Re: [PATCH net-next v4 1/7] dt-bindings: net: phy: add PoDL PSE property

[Rob Herring]

On Sun, Aug 28, 2022 at 08:30:15AM +0200, Oleksij Rempel wrote:
> Add property to reference node representing a PoDL Power Sourcing Equipment.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  Documentation/devicetree/bindings/net/ethernet-phy.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> index ed1415a4381f2..0b7b9dc69d454 100644
> --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
> @@ -144,6 +144,11 @@ properties:
>        Mark the corresponding energy efficient ethernet mode as
>        broken and request the ethernet to stop advertising it.
>  
> +  ieee802.3-pse:
> +    $ref: /schemas/types.yaml#/definitions/phandle

If you are saying this is the only location we'll ever find 
'ieee802.3-pse', then defining it here is okay. Otherwise, it 
needs to be it's own file so there's exactly 1 type definition. As 
you've said it might have cells by defining #pse-cells, 'phandle' is 
the wrong type. 'phandle-array' is what you want, but then actual users 
need to define how many entries (i.e. maxItems). Just like all the 
other provider/consumer bindings are structured.

Rob

Re: [PATCH net-next v4 5/7] ethtool: add interface to interact with Ethernet Power Equipment

[Jakub Kicinski]

On Sun, 28 Aug 2022 08:30:19 +0200 Oleksij Rempel wrote:
> +  ``ETHTOOL_A_PODL_PSE_ADMIN_STATE``          u8  Operational state of the PoDL
> +                                                  PSE functions
> +  ``ETHTOOL_A_PODL_PSE_PW_D_STATUS``          u8  power detection status of the
> +                                                  PoDL PSE.

If you don't mind a nit pick - u32 on these, netlink rounds up
attribute size to 4B, there's no difference in size for the two
so no point limiting ourselves.

Re: [PATCH net-next v4 5/7] ethtool: add interface to interact with Ethernet Power Equipment

[Jakub Kicinski]

On Sun, 28 Aug 2022 08:30:19 +0200 Oleksij Rempel wrote:
> Add interface to support Power Sourcing Equipment. At current step it
> provides generic way to address all variants of PSE devices as defined
> in IEEE 802.3-2018 but support only objects specified for IEEE 802.3-2018 104.4
> PoDL Power Sourcing Equipment (PSE).
> 
> Currently supported and mandatory objects are:
> IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus
> IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState
> IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl

warning here:

drivers/net/pse-pd/pse_core.c:304: warning: Function parameter or member 'status' not described in 'pse_ethtool_get_status'

Re: [PATCH net-next v4 2/7] net: add framework to support Ethernet PSE and PDs devices

[Jakub Kicinski]

On Sun, 28 Aug 2022 08:30:16 +0200 Oleksij Rempel wrote:
> This framework was create with intention to provide support for Ethernet PSE
> (Power Sourcing Equipment) and PDs (Powered Device).
> 
> At current step this patch implements generic PSE support for PoDL (Power over
> Data Lines 802.3bu) specification with reserving name space for PD devices as
> well.
> 
> This framework can be extended to support 802.3af and 802.3at "Power via the
> Media Dependent Interface" (or PoE/Power over Ethernet)

scripts/kernel-doc says:

include/linux/pse-pd/pse.h:42: warning: Function parameter or member 'lock' not described in 'pse_controller_dev'