All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Heiko Stuebner <heiko@sntech.de>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	phone-devel@vger.kernel.org,
	Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Subject: [PATCH v5 0/1] Add support for the Pine64 PinePhone Pro phone
Date: Mon, 29 Aug 2022 15:00:39 +1000	[thread overview]
Message-ID: <20220829050040.17330-1-tom@tom-fitzhenry.me.uk> (raw)

PinePhone Pro is a RK3399 based phone produced by Pine64.

Add a basic DTS for it. This is a working base that will allow myself and
others to add more nodes.

Relies on "dt-bindings: arm: rockchip: Add PinePhone Pro bindings"[0].

dtbs_check found some violations, but they were all common to the
rk3399.dtsi (and thus occurred on other RK3399 SoC DTs).

0. https://lore.kernel.org/all/20220815123004.252014-2-tom@tom-fitzhenry.me.uk/

Changes since v4:
* Add regulator vcc1v8_codec.
* Un-enable unused regulators for codec and touch.
* Fix voltage ranges on vdd_center and vccio_sd.
* Un-modify unused gpu_opp_table.

Changes since v3:
* Fix regulator min/max voltages, to align with RK3399-T datasheet.
* Re-enable cluster1_opp/opp06, with freq/volts as per RK3399-T datasheet.
* Fix gpu_opp_table voltages to align with RK3399-T datasheet.
* Change regulator names, to align with PinePhone Pro datasheet.
* Use DT Generic Names Recommendation: power -> key-power.
* Remove unused label vcc_wl on regulator.
* Fix code style.

Changes since v2:
* Used rk3399-opp.dtsi (+ disabled) rather than introdu4cing rk3399-t-opp.dtsi
* Removed superfluous comments.
* Followed DT Generic Names Recommendation
* Set 'From:' of DTS patch to be Martijn, the primary contributor to the DT.

Changes since v1:
* Simplified the DT to a minimal base.
* Introduced the RK3399-T OPPs.

Martijn Braam (1):
  arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro

 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3399-pinephone-pro.dts     | 398 ++++++++++++++++++
 2 files changed, 399 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts


base-commit: 2e1170c71ec0c0fb785ce76fca7c682e930af2b8
prerequisite-patch-id: 41a5419f57b2712f7127d5c6cf1dbf062f6570da
-- 
2.37.1


WARNING: multiple messages have this Message-ID (diff)
From: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Heiko Stuebner <heiko@sntech.de>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	phone-devel@vger.kernel.org,
	Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Subject: [PATCH v5 0/1] Add support for the Pine64 PinePhone Pro phone
Date: Mon, 29 Aug 2022 15:00:39 +1000	[thread overview]
Message-ID: <20220829050040.17330-1-tom@tom-fitzhenry.me.uk> (raw)

PinePhone Pro is a RK3399 based phone produced by Pine64.

Add a basic DTS for it. This is a working base that will allow myself and
others to add more nodes.

Relies on "dt-bindings: arm: rockchip: Add PinePhone Pro bindings"[0].

dtbs_check found some violations, but they were all common to the
rk3399.dtsi (and thus occurred on other RK3399 SoC DTs).

0. https://lore.kernel.org/all/20220815123004.252014-2-tom@tom-fitzhenry.me.uk/

Changes since v4:
* Add regulator vcc1v8_codec.
* Un-enable unused regulators for codec and touch.
* Fix voltage ranges on vdd_center and vccio_sd.
* Un-modify unused gpu_opp_table.

Changes since v3:
* Fix regulator min/max voltages, to align with RK3399-T datasheet.
* Re-enable cluster1_opp/opp06, with freq/volts as per RK3399-T datasheet.
* Fix gpu_opp_table voltages to align with RK3399-T datasheet.
* Change regulator names, to align with PinePhone Pro datasheet.
* Use DT Generic Names Recommendation: power -> key-power.
* Remove unused label vcc_wl on regulator.
* Fix code style.

Changes since v2:
* Used rk3399-opp.dtsi (+ disabled) rather than introdu4cing rk3399-t-opp.dtsi
* Removed superfluous comments.
* Followed DT Generic Names Recommendation
* Set 'From:' of DTS patch to be Martijn, the primary contributor to the DT.

Changes since v1:
* Simplified the DT to a minimal base.
* Introduced the RK3399-T OPPs.

Martijn Braam (1):
  arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro

 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3399-pinephone-pro.dts     | 398 ++++++++++++++++++
 2 files changed, 399 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts


base-commit: 2e1170c71ec0c0fb785ce76fca7c682e930af2b8
prerequisite-patch-id: 41a5419f57b2712f7127d5c6cf1dbf062f6570da
-- 
2.37.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Heiko Stuebner <heiko@sntech.de>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	phone-devel@vger.kernel.org,
	Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Subject: [PATCH v5 0/1] Add support for the Pine64 PinePhone Pro phone
Date: Mon, 29 Aug 2022 15:00:39 +1000	[thread overview]
Message-ID: <20220829050040.17330-1-tom@tom-fitzhenry.me.uk> (raw)

PinePhone Pro is a RK3399 based phone produced by Pine64.

Add a basic DTS for it. This is a working base that will allow myself and
others to add more nodes.

Relies on "dt-bindings: arm: rockchip: Add PinePhone Pro bindings"[0].

dtbs_check found some violations, but they were all common to the
rk3399.dtsi (and thus occurred on other RK3399 SoC DTs).

0. https://lore.kernel.org/all/20220815123004.252014-2-tom@tom-fitzhenry.me.uk/

Changes since v4:
* Add regulator vcc1v8_codec.
* Un-enable unused regulators for codec and touch.
* Fix voltage ranges on vdd_center and vccio_sd.
* Un-modify unused gpu_opp_table.

Changes since v3:
* Fix regulator min/max voltages, to align with RK3399-T datasheet.
* Re-enable cluster1_opp/opp06, with freq/volts as per RK3399-T datasheet.
* Fix gpu_opp_table voltages to align with RK3399-T datasheet.
* Change regulator names, to align with PinePhone Pro datasheet.
* Use DT Generic Names Recommendation: power -> key-power.
* Remove unused label vcc_wl on regulator.
* Fix code style.

Changes since v2:
* Used rk3399-opp.dtsi (+ disabled) rather than introdu4cing rk3399-t-opp.dtsi
* Removed superfluous comments.
* Followed DT Generic Names Recommendation
* Set 'From:' of DTS patch to be Martijn, the primary contributor to the DT.

Changes since v1:
* Simplified the DT to a minimal base.
* Introduced the RK3399-T OPPs.

Martijn Braam (1):
  arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro

 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3399-pinephone-pro.dts     | 398 ++++++++++++++++++
 2 files changed, 399 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts


base-commit: 2e1170c71ec0c0fb785ce76fca7c682e930af2b8
prerequisite-patch-id: 41a5419f57b2712f7127d5c6cf1dbf062f6570da
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2022-08-29  5:01 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-29  5:00 Tom Fitzhenry [this message]
2022-08-29  5:00 ` [PATCH v5 0/1] Add support for the Pine64 PinePhone Pro phone Tom Fitzhenry
2022-08-29  5:00 ` Tom Fitzhenry
2022-08-29  5:00 ` [PATCH v5 1/1] arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro Tom Fitzhenry
2022-08-29  5:00   ` Tom Fitzhenry
2022-08-29  5:00   ` Tom Fitzhenry
2022-09-04 17:22 ` [PATCH v5 0/1] Add support for the Pine64 PinePhone Pro phone Heiko Stuebner
2022-09-04 17:22   ` Heiko Stuebner
2022-09-04 17:22   ` Heiko Stuebner
2022-09-05 21:00   ` Tom Fitzhenry
2022-09-05 21:00     ` Tom Fitzhenry
2022-09-05 21:00     ` Tom Fitzhenry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220829050040.17330-1-tom@tom-fitzhenry.me.uk \
    --to=tom@tom-fitzhenry.me.uk \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.