All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jimmy Assarsson <extja@kvaser.com>
To: linux-can@vger.kernel.org, Marc Kleine-Budde <mkl@pengutronix.de>,
	Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: Jimmy Assarsson <jimmyassarsson@gmail.com>,
	stable@vger.kernel.org, Jimmy Assarsson <extja@kvaser.com>
Subject: [PATCH v3 12/15] can: kvaser_usb_leaf: Ignore stale bus-off after start
Date: Thu,  1 Sep 2022 14:27:26 +0200	[thread overview]
Message-ID: <20220901122729.271-13-extja@kvaser.com> (raw)
In-Reply-To: <20220901122729.271-1-extja@kvaser.com>

From: Anssi Hannula <anssi.hannula@bitwise.fi>

With 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 it was observed
that if the device was bus-off when stopped, at next start (either via
interface down/up or manual bus-off restart) the initial
CMD_CHIP_STATE_EVENT received just after CMD_START_CHIP_REPLY will have
the M16C_STATE_BUS_OFF bit still set, causing the interface to
immediately go bus-off again.

The bit seems to internally clear quickly afterwards but we do not get
another CMD_CHIP_STATE_EVENT.

Fix the issue by ignoring any initial bus-off state until we see at
least one bus-on state. Also, poll the state periodically until that
occurs.

It is possible we lose one actual immediately occurring bus-off event
here in which case the HW will auto-recover and we see the recovery
event. We will then catch the next bus-off event, if any.

This issue did not reproduce with 0bfd:0017 Kvaser Memorator
Professional HS/HS FW 2.0.50.

Cc: stable@vger.kernel.org
Fixes: 71873a9b38d1 ("can: kvaser_usb: Add support for more Kvaser Leaf v2 devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
---
Changes in v3:
 - Rebased on 1d5eeda23f36 ("can: kvaser_usb: advertise timestamping capabilities and add ioctl support")
 - Add stable to CC
 - Add S-o-b

Changes in v2:
  - Rebased on b3b6df2c56d8 ("can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits")

 .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c  | 31 ++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index 4f9c76f4d0da..f8a12a285050 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -427,6 +427,9 @@ struct kvaser_usb_net_leaf_priv {
 	struct kvaser_usb_net_priv *net;
 
 	struct delayed_work chip_state_req_work;
+
+	/* started but not reported as bus-on yet */
+	bool joining_bus;
 };
 
 static const struct can_bittiming_const kvaser_usb_leaf_m16c_bittiming_const = {
@@ -966,6 +969,7 @@ kvaser_usb_leaf_rx_error_update_can_state(struct kvaser_usb_net_priv *priv,
 					const struct kvaser_usb_err_summary *es,
 					struct can_frame *cf)
 {
+	struct kvaser_usb_net_leaf_priv *leaf = priv->sub_priv;
 	struct kvaser_usb *dev = priv->dev;
 	struct net_device_stats *stats = &priv->netdev->stats;
 	enum can_state cur_state, new_state, tx_state, rx_state;
@@ -990,6 +994,22 @@ kvaser_usb_leaf_rx_error_update_can_state(struct kvaser_usb_net_priv *priv,
 		new_state = CAN_STATE_ERROR_ACTIVE;
 	}
 
+	/* 0bfd:0124 FW 4.18.778 was observed to send the initial
+	 * CMD_CHIP_STATE_EVENT after CMD_START_CHIP with M16C_STATE_BUS_OFF
+	 * bit set if the channel was bus-off when it was last stopped (even
+	 * across chip resets). This bit will clear shortly afterwards, without
+	 * triggering a second unsolicited chip state event.
+	 * Ignore this initial bus-off.
+	 */
+	if (leaf->joining_bus) {
+		if (new_state == CAN_STATE_BUS_OFF) {
+			netdev_dbg(priv->netdev, "ignoring bus-off during startup");
+			new_state = cur_state;
+		} else {
+			leaf->joining_bus = false;
+		}
+	}
+
 	if (new_state != cur_state) {
 		tx_state = (es->txerr >= es->rxerr) ? new_state : 0;
 		rx_state = (es->txerr <= es->rxerr) ? new_state : 0;
@@ -1065,9 +1085,12 @@ static void kvaser_usb_leaf_rx_error(const struct kvaser_usb *dev,
 
 	/* If there are errors, request status updates periodically as we do
 	 * not get automatic notifications of improved state.
+	 * Also request updates if we saw a stale BUS_OFF during startup
+	 * (joining_bus).
 	 */
 	if (new_state < CAN_STATE_BUS_OFF &&
-	    (es->rxerr || es->txerr || new_state == CAN_STATE_ERROR_PASSIVE))
+	    (es->rxerr || es->txerr || new_state == CAN_STATE_ERROR_PASSIVE ||
+	     leaf->joining_bus))
 		schedule_delayed_work(&leaf->chip_state_req_work,
 				      msecs_to_jiffies(500));
 
@@ -1587,8 +1610,11 @@ static int kvaser_usb_leaf_set_opt_mode(const struct kvaser_usb_net_priv *priv)
 
 static int kvaser_usb_leaf_start_chip(struct kvaser_usb_net_priv *priv)
 {
+	struct kvaser_usb_net_leaf_priv *leaf = priv->sub_priv;
 	int err;
 
+	leaf->joining_bus = true;
+
 	reinit_completion(&priv->start_comp);
 
 	err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_START_CHIP,
@@ -1719,12 +1745,15 @@ static int kvaser_usb_leaf_set_mode(struct net_device *netdev,
 				    enum can_mode mode)
 {
 	struct kvaser_usb_net_priv *priv = netdev_priv(netdev);
+	struct kvaser_usb_net_leaf_priv *leaf = priv->sub_priv;
 	int err;
 
 	switch (mode) {
 	case CAN_MODE_START:
 		kvaser_usb_unlink_tx_urbs(priv);
 
+		leaf->joining_bus = true;
+
 		err = kvaser_usb_leaf_simple_cmd_async(priv, CMD_START_CHIP);
 		if (err)
 			return err;
-- 
2.37.3


  parent reply	other threads:[~2022-09-01 12:29 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-01 12:27 [PATCH v3 00/15] can: kvaser_usb: Various fixes Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 01/15] can: kvaser_usb_leaf: Fix overread with an invalid command Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 02/15] can: kvaser_usb: Fix use of uninitialized completion Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 03/15] can: kvaser_usb: Fix possible completions during init_completion Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 04/15] can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device Jimmy Assarsson
2022-09-02 11:40   ` Anssi Hannula
2022-09-03 18:21     ` Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 05/15] can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 06/15] can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 07/15] can: kvaser_usb_leaf: Set Warning state even without bus errors Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 08/15] can: kvaser_usb_leaf: Fix TX queue out of sync after restart Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 09/15] can: kvaser_usb_leaf: Fix CAN state " Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 10/15] can: kvaser_usb_leaf: Fix improved state not being reported Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 11/15] can: kvaser_usb_leaf: Fix wrong CAN state after stopping Jimmy Assarsson
2022-09-01 12:27 ` Jimmy Assarsson [this message]
2022-09-01 12:27 ` [PATCH v3 13/15] can: kvaser_usb_leaf: Fix bogus restart events Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 14/15] can: kvaser_usb: Add struct kvaser_usb_busparams Jimmy Assarsson
2022-09-01 12:27 ` [PATCH v3 15/15] can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming Jimmy Assarsson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220901122729.271-13-extja@kvaser.com \
    --to=extja@kvaser.com \
    --cc=anssi.hannula@bitwise.fi \
    --cc=jimmyassarsson@gmail.com \
    --cc=linux-can@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.