All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jiasheng Jiang <jiasheng@iscas.ac.cn>
To: gregkh@linuxfoundation.org
Cc: johan@kernel.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Jiasheng Jiang <jiasheng@iscas.ac.cn>
Subject: [PATCH v2] USB: serial: ftdi_sio: Convert to use dev_groups
Date: Fri,  2 Sep 2022 15:58:53 +0800	[thread overview]
Message-ID: <20220902075853.3931834-1-jiasheng@iscas.ac.cn> (raw)

The driver core supports the ability to handle the creation and removal
of device-specific sysfs files in a race-free manner. Moreover, it can
guarantee the success of creation. Therefore, it should be better to
move the definition of ftdi_sio_device to the end, remove
create_sysfs_attrs and remove_sysfs_attrs, and convert to use dev_groups.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
---
Changelog:

v1 -> v2:

1. Change the title.
2. Switch to use an attribute group.
---
 drivers/usb/serial/ftdi_sio.c | 124 ++++++++++++----------------------
 1 file changed, 42 insertions(+), 82 deletions(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index d5a3986dfee7..41d8bfb02322 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1108,41 +1108,6 @@ static u32 ftdi_232bm_baud_to_divisor(int baud);
 static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base);
 static u32 ftdi_2232h_baud_to_divisor(int baud);
 
-static struct usb_serial_driver ftdi_sio_device = {
-	.driver = {
-		.owner =	THIS_MODULE,
-		.name =		"ftdi_sio",
-	},
-	.description =		"FTDI USB Serial Device",
-	.id_table =		id_table_combined,
-	.num_ports =		1,
-	.bulk_in_size =		512,
-	.bulk_out_size =	256,
-	.probe =		ftdi_sio_probe,
-	.port_probe =		ftdi_sio_port_probe,
-	.port_remove =		ftdi_sio_port_remove,
-	.open =			ftdi_open,
-	.dtr_rts =		ftdi_dtr_rts,
-	.throttle =		usb_serial_generic_throttle,
-	.unthrottle =		usb_serial_generic_unthrottle,
-	.process_read_urb =	ftdi_process_read_urb,
-	.prepare_write_buffer =	ftdi_prepare_write_buffer,
-	.tiocmget =		ftdi_tiocmget,
-	.tiocmset =		ftdi_tiocmset,
-	.tiocmiwait =		usb_serial_generic_tiocmiwait,
-	.get_icount =           usb_serial_generic_get_icount,
-	.ioctl =		ftdi_ioctl,
-	.get_serial =		get_serial_info,
-	.set_serial =		set_serial_info,
-	.set_termios =		ftdi_set_termios,
-	.break_ctl =		ftdi_break_ctl,
-	.tx_empty =		ftdi_tx_empty,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
-	&ftdi_sio_device, NULL
-};
-
 
 #define WDR_TIMEOUT 5000 /* default urb timeout */
 #define WDR_SHORT_TIMEOUT 1000	/* shorter urb timeout */
@@ -1729,50 +1694,12 @@ static ssize_t event_char_store(struct device *dev,
 }
 static DEVICE_ATTR_WO(event_char);
 
-static int create_sysfs_attrs(struct usb_serial_port *port)
-{
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	int retval = 0;
-
-	/* XXX I've no idea if the original SIO supports the event_char
-	 * sysfs parameter, so I'm playing it safe.  */
-	if (priv->chip_type != SIO) {
-		dev_dbg(&port->dev, "sysfs attributes for %s\n", ftdi_chip_name[priv->chip_type]);
-		retval = device_create_file(&port->dev, &dev_attr_event_char);
-		if ((!retval) &&
-		    (priv->chip_type == FT232BM ||
-		     priv->chip_type == FT2232C ||
-		     priv->chip_type == FT232RL ||
-		     priv->chip_type == FT2232H ||
-		     priv->chip_type == FT4232H ||
-		     priv->chip_type == FT232H ||
-		     priv->chip_type == FTX)) {
-			retval = device_create_file(&port->dev,
-						    &dev_attr_latency_timer);
-		}
-	}
-	return retval;
-}
-
-static void remove_sysfs_attrs(struct usb_serial_port *port)
-{
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-
-	/* XXX see create_sysfs_attrs */
-	if (priv->chip_type != SIO) {
-		device_remove_file(&port->dev, &dev_attr_event_char);
-		if (priv->chip_type == FT232BM ||
-		    priv->chip_type == FT2232C ||
-		    priv->chip_type == FT232RL ||
-		    priv->chip_type == FT2232H ||
-		    priv->chip_type == FT4232H ||
-		    priv->chip_type == FT232H ||
-		    priv->chip_type == FTX) {
-			device_remove_file(&port->dev, &dev_attr_latency_timer);
-		}
-	}
-
-}
+static struct attribute *ftdi_sio_attrs[] = {
+	&dev_attr_event_char.attr,
+	&dev_attr_latency_timer.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(ftdi_sio);
 
 #ifdef CONFIG_GPIOLIB
 
@@ -2251,7 +2178,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	if (read_latency_timer(port) < 0)
 		priv->latency = 16;
 	write_latency_timer(port);
-	create_sysfs_attrs(port);
 
 	result = ftdi_gpio_init(port);
 	if (result < 0) {
@@ -2377,8 +2303,6 @@ static void ftdi_sio_port_remove(struct usb_serial_port *port)
 
 	ftdi_gpio_remove(port);
 
-	remove_sysfs_attrs(port);
-
 	kfree(priv);
 }
 
@@ -2915,6 +2839,42 @@ static int ftdi_ioctl(struct tty_struct *tty,
 	return -ENOIOCTLCMD;
 }
 
+static struct usb_serial_driver ftdi_sio_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"ftdi_sio",
+		.dev_groups =	ftdi_sio_groups,
+	},
+	.description =		"FTDI USB Serial Device",
+	.id_table =		id_table_combined,
+	.num_ports =		1,
+	.bulk_in_size =		512,
+	.bulk_out_size =	256,
+	.probe =		ftdi_sio_probe,
+	.port_probe =		ftdi_sio_port_probe,
+	.port_remove =		ftdi_sio_port_remove,
+	.open =			ftdi_open,
+	.dtr_rts =		ftdi_dtr_rts,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.process_read_urb =	ftdi_process_read_urb,
+	.prepare_write_buffer =	ftdi_prepare_write_buffer,
+	.tiocmget =		ftdi_tiocmget,
+	.tiocmset =		ftdi_tiocmset,
+	.tiocmiwait =		usb_serial_generic_tiocmiwait,
+	.get_icount =           usb_serial_generic_get_icount,
+	.ioctl =		ftdi_ioctl,
+	.get_serial =		get_serial_info,
+	.set_serial =		set_serial_info,
+	.set_termios =		ftdi_set_termios,
+	.break_ctl =		ftdi_break_ctl,
+	.tx_empty =		ftdi_tx_empty,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ftdi_sio_device, NULL
+};
+
 module_usb_serial_driver(serial_drivers, id_table_combined);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
-- 
2.25.1


             reply	other threads:[~2022-09-02  7:59 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-02  7:58 Jiasheng Jiang [this message]
2022-09-02  8:06 ` [PATCH v2] USB: serial: ftdi_sio: Convert to use dev_groups Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220902075853.3931834-1-jiasheng@iscas.ac.cn \
    --to=jiasheng@iscas.ac.cn \
    --cc=gregkh@linuxfoundation.org \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.