[PATCH 11/11] hw/ppc/e500: Add Freescale eSDHC to e500 boards

[Bernhard Beschow <shentey@gmail.com>]

Adds missing functionality to emulated e500 SOCs which increases the
chance of given "real" firmware images to access SD cards.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
---
 docs/system/ppc/ppce500.rst | 13 +++++++++++++
 hw/ppc/Kconfig              |  1 +
 hw/ppc/e500.c               | 32 ++++++++++++++++++++++++++++++++
 3 files changed, 46 insertions(+)

diff --git a/docs/system/ppc/ppce500.rst b/docs/system/ppc/ppce500.rst
index c3f55c6f3d..50b199c8f3 100644
--- a/docs/system/ppc/ppce500.rst
+++ b/docs/system/ppc/ppce500.rst
@@ -19,6 +19,7 @@ The ``ppce500`` machine supports the following devices:
 * Power-off functionality via one GPIO pin
 * 1 Freescale MPC8xxx PCI host controller
 * VirtIO devices via PCI bus
+* 1 Freescale Enhanced Secure Digital Host controller (eSDHC)
 * 1 Freescale Enhanced Triple Speed Ethernet controller (eTSEC)
 
 Hardware configuration information
@@ -131,6 +132,18 @@ be used as follows:
       -drive if=pflash,file=/path/to/rootfs.ext2,format=raw \
       -append "rootwait root=/dev/mtdblock0"
 
+Alternatively, the root file system can also reside on an emulated SD card
+whose size must again be a power of two:
+
+.. code-block:: bash
+
+  $ qemu-system-ppc64 -M ppce500 -cpu e500mc -smp 4 -m 2G \
+      -display none -serial stdio \
+      -kernel vmlinux \
+      -device sd-card,drive=mydrive \
+      -drive id=mydrive,if=none,file=/path/to/rootfs.ext2,format=raw \
+      -append "rootwait root=/dev/mmcblk0"
+
 Running U-Boot
 --------------
 
diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
index 769a1ead1c..6e31f568ba 100644
--- a/hw/ppc/Kconfig
+++ b/hw/ppc/Kconfig
@@ -129,6 +129,7 @@ config E500
     select PFLASH_CFI01
     select PLATFORM_BUS
     select PPCE500_PCI
+    select SDHCI
     select SERIAL
     select MPC_I2C
     select FDT_PPC
diff --git a/hw/ppc/e500.c b/hw/ppc/e500.c
index 7843a4e04b..87a03fd4a9 100644
--- a/hw/ppc/e500.c
+++ b/hw/ppc/e500.c
@@ -48,6 +48,7 @@
 #include "hw/net/fsl_etsec/etsec.h"
 #include "hw/i2c/i2c.h"
 #include "hw/irq.h"
+#include "hw/sd/sdhci.h"
 
 #define EPAPR_MAGIC                (0x45504150)
 #define DTC_LOAD_PAD               0x1800000
@@ -66,11 +67,14 @@
 #define MPC8544_SERIAL1_REGS_OFFSET 0x4600ULL
 #define MPC8544_PCI_REGS_OFFSET    0x8000ULL
 #define MPC8544_PCI_REGS_SIZE      0x1000ULL
+#define MPC85XX_ESDHC_REGS_OFFSET  0x2e000ULL
+#define MPC85XX_ESDHC_REGS_SIZE    0x1000ULL
 #define MPC8544_UTIL_OFFSET        0xe0000ULL
 #define MPC8XXX_GPIO_OFFSET        0x000FF000ULL
 #define MPC8544_I2C_REGS_OFFSET    0x3000ULL
 #define MPC8XXX_GPIO_IRQ           47
 #define MPC8544_I2C_IRQ            43
+#define MPC85XX_ESDHC_IRQ          72
 #define RTC_REGS_OFFSET            0x68
 
 #define PLATFORM_CLK_FREQ_HZ       (400 * 1000 * 1000)
@@ -203,6 +207,25 @@ static void dt_i2c_create(void *fdt, const char *soc, const char *mpic,
     g_free(i2c);
 }
 
+static void dt_sdhc_create(void *fdt, const char *parent, const char *mpic)
+{
+    hwaddr mmio = MPC85XX_ESDHC_REGS_OFFSET;
+    hwaddr size = MPC85XX_ESDHC_REGS_SIZE;
+    int irq = MPC85XX_ESDHC_IRQ;
+    char *name;
+
+    name = g_strdup_printf("%s/sdhc@%" PRIx64, parent, mmio);
+    qemu_fdt_add_subnode(fdt, name);
+    /* qemu_fdt_setprop_cells(fdt, name, "voltage-ranges", 3300, 3300); */
+    qemu_fdt_setprop_cells(fdt, name, "clock-frequency", 167000000);
+    qemu_fdt_setprop(fdt, name, "sdhci,auto-cmd12", NULL, 0);
+    qemu_fdt_setprop_phandle(fdt, name, "interrupt-parent", mpic);
+    qemu_fdt_setprop_cells(fdt, name, "bus-width", 4);
+    qemu_fdt_setprop_cells(fdt, name, "interrupts", irq, 0x2);
+    qemu_fdt_setprop_cells(fdt, name, "reg", mmio, size);
+    qemu_fdt_setprop_string(fdt, name, "compatible", "fsl,esdhc");
+    g_free(name);
+}
 
 typedef struct PlatformDevtreeData {
     void *fdt;
@@ -556,6 +579,8 @@ static int ppce500_load_device_tree(PPCE500MachineState *pms,
 
     dt_rtc_create(fdt, "i2c", "rtc");
 
+    /* sdhc */
+    dt_sdhc_create(fdt, soc, mpic);
 
     gutil = g_strdup_printf("%s/global-utilities@%llx", soc,
                             MPC8544_UTIL_OFFSET);
@@ -996,6 +1021,13 @@ void ppce500_init(MachineState *machine)
     i2c_slave_create_simple(i2c, "ds1338", RTC_REGS_OFFSET);
 
 
+    /* eSDHC */
+    dev = qdev_new(TYPE_FSL_ESDHC);
+    s = SYS_BUS_DEVICE(dev);
+    sysbus_realize_and_unref(s, &error_fatal);
+    sysbus_mmio_map(s, 0, pmc->ccsrbar_base + MPC85XX_ESDHC_REGS_OFFSET);
+    sysbus_connect_irq(s, 0, qdev_get_gpio_in(mpicdev, MPC85XX_ESDHC_IRQ));
+
     /* General Utility device */
     dev = qdev_new("mpc8544-guts");
     s = SYS_BUS_DEVICE(dev);
-- 
2.37.3