From: Chris Packham <judge.packham@gmail.com>
To: Stefan Roese <sr@denx.de>
Cc: "Elad Nachman" <enachman@marvell.com>,
"Vadym Kochan" <vadym.kochan@plvision.eu>,
"Chris Packham" <judge.packham@gmail.com>,
"Adam Ford" <aford173@gmail.com>, "Alice Guo" <alice.guo@nxp.com>,
"Amjad Ouled-Ameur" <aouledameur@baylibre.com>,
"Andre Przywara" <andre.przywara@arm.com>,
"Chris Packham" <chris.packham@alliedtelesis.co.nz>,
"Christian Hewitt" <christianshewitt@gmail.com>,
"Fabio Estevam" <festevam@denx.de>,
"Jim Liu" <jim.t90615@gmail.com>,
"Joe Hershberger" <joe.hershberger@ni.com>,
Keerthy <j-keerthy@ti.com>, "Lukasz Majewski" <lukma@denx.de>,
"Marcel Ziswiler" <marcel.ziswiler@toradex.com>,
"Marek Behún" <kabel@kernel.org>, "Marek Vasut" <marex@denx.de>,
"Michael Scott" <mike@foundries.io>,
"Michael Walle" <michael@walle.cc>,
"Pali Rohár" <pali@kernel.org>, "Peng Fan" <peng.fan@nxp.com>,
"Ramon Fried" <rfried.dev@gmail.com>,
"Samuel Holland" <samuel@sholland.org>,
"Sean Anderson" <sean.anderson@seco.com>,
"Simon Glass" <sjg@chromium.org>,
"Tim Harvey" <tharvey@gateworks.com>,
"Tom Rini" <trini@konsulko.com>,
"Weijie Gao" <weijie.gao@mediatek.com>, "Ye Li" <ye.li@nxp.com>,
"Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org>,
u-boot@lists.denx.de
Subject: [PATCH 0/7] arm: mvebu: Support for 98DX25xx/98DX35xx (AlleyCat5)
Date: Fri, 16 Sep 2022 16:54:16 +1200 [thread overview]
Message-ID: <20220916045423.3635985-1-judge.packham@gmail.com> (raw)
These patches are based on Marvell's bootloader for the AlleyCat5/5X
which was based on u-boot 2018.03. I've split that code into consumable
chunks and dropped as much unnecessary stuff as I can. I've also tried
to sync the device trees as much as possible with the support that will
land in Linux 6.0 although there are still some differences
Chris Packham (7):
net: mvneta: Add support for AlleyCat5
usb: ehci: ehci-marvell: Support for marvell,ac5-ehci
pinctrl: mvebu: Add AlleyCat5 support
misc: mvebu: Add sample at reset driver
arm: mvebu: Support for 98DX25xx/98DX35xx SoC
arm: mvebu: Add RD-AC5X board
tools: kwboot: Add knowledge of Marvell's TIM
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/ac5-98dx25xx.dtsi | 292 +++++++++++++++++++++
arch/arm/dts/ac5-98dx35xx-rd.dts | 155 +++++++++++
arch/arm/dts/ac5-98dx35xx.dtsi | 17 ++
arch/arm/mach-mvebu/Kconfig | 14 +-
arch/arm/mach-mvebu/Makefile | 1 +
arch/arm/mach-mvebu/alleycat5/Makefile | 9 +
arch/arm/mach-mvebu/alleycat5/clock.c | 49 ++++
arch/arm/mach-mvebu/alleycat5/cpu.c | 129 +++++++++
arch/arm/mach-mvebu/alleycat5/soc.c | 229 ++++++++++++++++
arch/arm/mach-mvebu/arm64-common.c | 15 ++
arch/arm/mach-mvebu/include/mach/clock.h | 11 +
arch/arm/mach-mvebu/include/mach/cpu.h | 4 +
arch/arm/mach-mvebu/include/mach/soc.h | 4 +
board/Marvell/mvebu_alleycat-5/MAINTAINERS | 6 +
board/Marvell/mvebu_alleycat-5/Makefile | 3 +
board/Marvell/mvebu_alleycat-5/board.c | 35 +++
configs/mvebu_ac5_rd_defconfig | 89 +++++++
drivers/misc/Kconfig | 6 +
drivers/misc/Makefile | 1 +
drivers/misc/mvebu_sar/Makefile | 4 +
drivers/misc/mvebu_sar/ac5_sar.c | 119 +++++++++
drivers/misc/mvebu_sar/sar-uclass.c | 146 +++++++++++
drivers/net/Kconfig | 2 +-
drivers/net/mvneta.c | 66 ++++-
drivers/pinctrl/mvebu/Kconfig | 2 +-
drivers/usb/host/Kconfig | 1 +
drivers/usb/host/ehci-marvell.c | 57 +++-
include/configs/mvebu_alleycat-5.h | 92 +++++++
include/dm/uclass-id.h | 1 +
include/fdtdec.h | 4 +
include/mvebu/mvebu_chip_sar.h | 73 ++++++
include/mvebu/sar.h | 57 ++++
include/mvebu/var.h | 28 ++
include/sar-uclass.h | 23 ++
lib/fdtdec.c | 6 +-
tools/kwbimage.h | 29 ++
tools/kwboot.c | 3 +
38 files changed, 1767 insertions(+), 18 deletions(-)
create mode 100644 arch/arm/dts/ac5-98dx25xx.dtsi
create mode 100644 arch/arm/dts/ac5-98dx35xx-rd.dts
create mode 100644 arch/arm/dts/ac5-98dx35xx.dtsi
create mode 100644 arch/arm/mach-mvebu/alleycat5/Makefile
create mode 100644 arch/arm/mach-mvebu/alleycat5/clock.c
create mode 100644 arch/arm/mach-mvebu/alleycat5/cpu.c
create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.c
create mode 100644 arch/arm/mach-mvebu/include/mach/clock.h
create mode 100644 board/Marvell/mvebu_alleycat-5/MAINTAINERS
create mode 100644 board/Marvell/mvebu_alleycat-5/Makefile
create mode 100644 board/Marvell/mvebu_alleycat-5/board.c
create mode 100644 configs/mvebu_ac5_rd_defconfig
create mode 100644 drivers/misc/mvebu_sar/Makefile
create mode 100644 drivers/misc/mvebu_sar/ac5_sar.c
create mode 100644 drivers/misc/mvebu_sar/sar-uclass.c
create mode 100644 include/configs/mvebu_alleycat-5.h
create mode 100644 include/mvebu/mvebu_chip_sar.h
create mode 100644 include/mvebu/sar.h
create mode 100644 include/mvebu/var.h
create mode 100644 include/sar-uclass.h
--
2.37.3
next reply other threads:[~2022-09-16 12:23 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-16 4:54 Chris Packham [this message]
2022-09-16 4:54 ` [PATCH 1/7] net: mvneta: Add support for AlleyCat5 Chris Packham
2022-09-16 4:54 ` [PATCH 2/7] usb: ehci: ehci-marvell: Support for marvell,ac5-ehci Chris Packham
2022-09-16 4:54 ` [PATCH 3/7] pinctrl: mvebu: Add AlleyCat5 support Chris Packham
2022-09-16 4:54 ` [PATCH 4/7] misc: mvebu: Add sample at reset driver Chris Packham
2022-09-16 4:54 ` [PATCH 5/7] arm: mvebu: Support for 98DX25xx/98DX35xx SoC Chris Packham
2022-09-16 4:54 ` [PATCH 6/7] arm: mvebu: Add RD-AC5X board Chris Packham
2022-09-16 10:58 ` Pali Rohár
2022-09-17 9:03 ` Chris Packham
2022-09-16 4:54 ` [PATCH 7/7] tools: kwboot: Add knowledge of Marvell's TIM Chris Packham
2022-09-16 8:11 ` Pali Rohár
2022-09-16 10:34 ` Chris Packham
2022-09-16 10:50 ` Pali Rohár
2022-09-16 12:36 ` Pali Rohár
2022-09-18 22:57 ` Chris Packham
2022-09-18 23:02 ` Pali Rohár
2022-09-19 8:24 ` Chris Packham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220916045423.3635985-1-judge.packham@gmail.com \
--to=judge.packham@gmail.com \
--cc=aford173@gmail.com \
--cc=alice.guo@nxp.com \
--cc=andre.przywara@arm.com \
--cc=aouledameur@baylibre.com \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=christianshewitt@gmail.com \
--cc=enachman@marvell.com \
--cc=festevam@denx.de \
--cc=j-keerthy@ti.com \
--cc=jim.t90615@gmail.com \
--cc=joe.hershberger@ni.com \
--cc=kabel@kernel.org \
--cc=lukma@denx.de \
--cc=marcel.ziswiler@toradex.com \
--cc=marex@denx.de \
--cc=michael@walle.cc \
--cc=mike@foundries.io \
--cc=pali@kernel.org \
--cc=paul.liu@linaro.org \
--cc=peng.fan@nxp.com \
--cc=rfried.dev@gmail.com \
--cc=samuel@sholland.org \
--cc=sean.anderson@seco.com \
--cc=sjg@chromium.org \
--cc=sr@denx.de \
--cc=tharvey@gateworks.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vadym.kochan@plvision.eu \
--cc=weijie.gao@mediatek.com \
--cc=ye.li@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.