All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
	kernel@pengutronix.de, Marc Kleine-Budde <mkl@pengutronix.de>,
	Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Subject: [PATCH net 3/3] can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported
Date: Wed, 21 Sep 2022 10:36:09 +0200	[thread overview]
Message-ID: <20220921083609.419768-4-mkl@pengutronix.de> (raw)
In-Reply-To: <20220921083609.419768-1-mkl@pengutronix.de>

Until commit 409c188c57cd ("can: tree-wide: advertise software
timestamping capabilities") the ethtool_ops was only assigned for
devices which support the GS_CAN_FEATURE_IDENTIFY feature. That commit
assigns ethtool_ops unconditionally.

This results on controllers without GS_CAN_FEATURE_IDENTIFY support
for the following ethtool error:

| $ ethtool -p can0 1
| Cannot identify NIC: Broken pipe

Restore the correct error value by checking for
GS_CAN_FEATURE_IDENTIFY in the gs_usb_set_phys_id() function.

| $ ethtool -p can0 1
| Cannot identify NIC: Operation not supported

While there use the variable "netdev" for the "struct net_device"
pointer and "dev" for the "struct gs_can" pointer as in the rest of
the driver.

Fixes: 409c188c57cd ("can: tree-wide: advertise software timestamping capabilities")
Link: http://lore.kernel.org/all/20220818143853.2671854-1-mkl@pengutronix.de
Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/usb/gs_usb.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c
index 553e2c7b0b12..c1ff3c046d62 100644
--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -925,17 +925,21 @@ static int gs_usb_set_identify(struct net_device *netdev, bool do_identify)
 }
 
 /* blink LED's for finding the this interface */
-static int gs_usb_set_phys_id(struct net_device *dev,
+static int gs_usb_set_phys_id(struct net_device *netdev,
 			      enum ethtool_phys_id_state state)
 {
+	const struct gs_can *dev = netdev_priv(netdev);
 	int rc = 0;
 
+	if (!(dev->feature & GS_CAN_FEATURE_IDENTIFY))
+		return -EOPNOTSUPP;
+
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
-		rc = gs_usb_set_identify(dev, GS_CAN_IDENTIFY_ON);
+		rc = gs_usb_set_identify(netdev, GS_CAN_IDENTIFY_ON);
 		break;
 	case ETHTOOL_ID_INACTIVE:
-		rc = gs_usb_set_identify(dev, GS_CAN_IDENTIFY_OFF);
+		rc = gs_usb_set_identify(netdev, GS_CAN_IDENTIFY_OFF);
 		break;
 	default:
 		break;
@@ -1072,9 +1076,10 @@ static struct gs_can *gs_make_candev(unsigned int channel,
 		dev->feature |= GS_CAN_FEATURE_REQ_USB_QUIRK_LPC546XX |
 			GS_CAN_FEATURE_QUIRK_BREQ_CANTACT_PRO;
 
-	if (le32_to_cpu(dconf->sw_version) > 1)
-		if (feature & GS_CAN_FEATURE_IDENTIFY)
-			netdev->ethtool_ops = &gs_usb_ethtool_ops;
+	/* GS_CAN_FEATURE_IDENTIFY is only supported for sw_version > 1 */
+	if (!(le32_to_cpu(dconf->sw_version) > 1 &&
+	      feature & GS_CAN_FEATURE_IDENTIFY))
+		dev->feature &= ~GS_CAN_FEATURE_IDENTIFY;
 
 	kfree(bt_const);
 
-- 
2.35.1



      parent reply	other threads:[~2022-09-21  8:36 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-21  8:36 [PATCH net 0/3] pull-request: can 2022-09-21 Marc Kleine-Budde
2022-09-21  8:36 ` [PATCH net 1/3] can: flexcan: flexcan_mailbox_read() fix return value for drop = true Marc Kleine-Budde
2022-09-21 14:20   ` patchwork-bot+netdevbpf
2022-09-21  8:36 ` [PATCH net 2/3] can: gs_usb: gs_can_open(): fix race dev->can.state condition Marc Kleine-Budde
2022-09-22  8:04   ` Matthieu Baerts
2022-09-22  8:23     ` Marc Kleine-Budde
2022-09-22 20:05       ` Jakub Kicinski
2022-09-23  9:24         ` Matthieu Baerts
2022-09-21  8:36 ` Marc Kleine-Budde [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220921083609.419768-4-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=davem@davemloft.net \
    --cc=kernel@pengutronix.de \
    --cc=kuba@kernel.org \
    --cc=linux-can@vger.kernel.org \
    --cc=mailhol.vincent@wanadoo.fr \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.