[PATCH 0/1] uvc gadget sg performance issues

From: Dan Vacura <w36195@motorola.com>
To: linux-usb@vger.kernel.org
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
	Dan Vacura <w36195@motorola.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Felipe Balbi <balbi@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Michael Grzeschik <m.grzeschik@pengutronix.de>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 0/1] uvc gadget sg performance issues
Date: Mon, 26 Sep 2022 14:53:06 -0500	[thread overview]
Message-ID: <20220926195307.110121-1-w36195@motorola.com> (raw)

Hello uvc gadget developers,

I'm working on a 5.15.41 based kernel on a qcom chipset with the dwc3
controller and I'm encountering two problems related to the recent performance
improvement changes:

https://patchwork.kernel.org/project/linux-usb/patch/20210628155311.16762-5-m.grzeschik@pengutronix.de/  and 
https://patchwork.kernel.org/project/linux-usb/patch/20210628155311.16762-6-m.grzeschik@pengutronix.de/

If I revert these two changes, then I have much improved stability and a
transmission problem I'm seeing is gone. Has there been any success from
others on 5.15 with this uvc improvement and any recommendations for my
current problems?  Those being:

1) a smmu panic, snippet here: 

    <3>[  718.314900][  T803] arm-smmu 15000000.apps-smmu: Unhandled arm-smmu context fault from a600000.dwc3!
    <3>[  718.314994][  T803] arm-smmu 15000000.apps-smmu: FAR    = 0x00000000efe60800
    <3>[  718.315023][  T803] arm-smmu 15000000.apps-smmu: PAR    = 0x0000000000000000
    <3>[  718.315048][  T803] arm-smmu 15000000.apps-smmu: FSR    = 0x40000402 [TF R SS ]
    <3>[  718.315074][  T803] arm-smmu 15000000.apps-smmu: FSYNR0    = 0x5f0003
    <3>[  718.315096][  T803] arm-smmu 15000000.apps-smmu: FSYNR1    = 0xaa02
    <3>[  718.315117][  T803] arm-smmu 15000000.apps-smmu: context bank#    = 0x1b
    <3>[  718.315141][  T803] arm-smmu 15000000.apps-smmu: TTBR0  = 0x001b0000c2a92000
    <3>[  718.315165][  T803] arm-smmu 15000000.apps-smmu: TTBR1  = 0x001b000000000000
    <3>[  718.315192][  T803] arm-smmu 15000000.apps-smmu: SCTLR  = 0x0a5f00e7 ACTLR  = 0x00000003
    <3>[  718.315245][  T803] arm-smmu 15000000.apps-smmu: CBAR  = 0x0001f300
    <3>[  718.315274][  T803] arm-smmu 15000000.apps-smmu: MAIR0   = 0xf404ff44 MAIR1   = 0x0000efe4
    <3>[  718.315297][  T803] arm-smmu 15000000.apps-smmu: SID = 0x40
    <3>[  718.315318][  T803] arm-smmu 15000000.apps-smmu: Client info: BID=0x5, PID=0xa, MID=0x2
    <3>[  718.315377][  T803] arm-smmu 15000000.apps-smmu: soft iova-to-phys=0x0000000000000000

    I can reduce this panic with the proposed patch, but it still happens until I
    disable the "req->no_interrupt = 1" logic.

2) The frame is not fully transmitted in dwc3 with sg support enabled. 

    There seems to be a mapping limit I'm seeing where only the roughly first
    70% of the total frame is sent. Interestingly, if I allocate a larger
    size for the buffer upfront, in uvc_queue_setup(), like sizes[0] =
    video->imagesize * 3. Then the issue rarely happens. For example, when I
    do YUYV I see green, uninitialized data, at the bottom part of the
    frame. If I do MJPG with smaller filled sizes, the transmission is fine.

    +-------------------------+
    |                         |
    |                         |
    |                         |
    |      Good data          |
    |                         |
    |                         |
    |                         |
    +-------------------------+
    |xxxxxxxxxxxxxxxxxxxxxxxxx|
    |xxxx  Bad data  xxxxxxxxx|
    |xxxxxxxxxxxxxxxxxxxxxxxxx|
    +-------------------------+

Appreciate any thoughts or feedback related to these issues.

Dan Vacura (1):
  usb: gadget: uvc: fix sg handling in error case

 drivers/usb/gadget/function/uvc_queue.c |  8 +++++---
 drivers/usb/gadget/function/uvc_queue.h |  2 +-
 drivers/usb/gadget/function/uvc_video.c | 18 ++++++++++++++----
 3 files changed, 20 insertions(+), 8 deletions(-)

-- 
2.20.4