From: Daniel Lezcano <daniel.lezcano@linaro.org> To: daniel.lezcano@linaro.org, rafael@kernel.org Cc: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, rui.zhang@intel.com, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>, Amit Kucheria <amitk@kernel.org>, Alim Akhtar <alim.akhtar@samsung.com>, linux-samsung-soc@vger.kernel.org (open list:SAMSUNG THERMAL DRIVER), linux-arm-kernel@lists.infradead.org (moderated list:ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES) Subject: [PATCH v6 07/29] thermal/drivers/exynos: Use generic thermal_zone_get_trip() function Date: Tue, 27 Sep 2022 16:32:17 +0200 [thread overview] Message-ID: <20220927143239.376737-8-daniel.lezcano@linaro.org> (raw) In-Reply-To: <20220927143239.376737-1-daniel.lezcano@linaro.org> The thermal framework gives the possibility to register the trip points with the thermal zone. When that is done, no get_trip_* ops are needed and they can be removed. Convert ops content logic into generic trip points and register them with the thermal zone. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- drivers/thermal/samsung/exynos_tmu.c | 41 +++++++++++----------------- 1 file changed, 16 insertions(+), 25 deletions(-) diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 51874d0a284c..0e33d32a9d2e 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -260,16 +260,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct thermal_zone_device *tzd = data->tzd; - const struct thermal_trip * const trips = - of_thermal_get_trip_points(tzd); unsigned int status; - int ret = 0, temp, hyst; - - if (!trips) { - dev_err(&pdev->dev, - "Cannot get trip points from device tree!\n"); - return -ENODEV; - } + int ret = 0, temp; if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */ ret = tzd->ops->get_crit_temp(tzd, &temp); @@ -303,19 +295,16 @@ static int exynos_tmu_initialize(struct platform_device *pdev) /* Write temperature code for rising and falling threshold */ for (i = 0; i < ntrips; i++) { - /* Write temperature code for rising threshold */ - ret = tzd->ops->get_trip_temp(tzd, i, &temp); - if (ret) - goto err; - temp /= MCELSIUS; - data->tmu_set_trip_temp(data, i, temp); - /* Write temperature code for falling threshold */ - ret = tzd->ops->get_trip_hyst(tzd, i, &hyst); + struct thermal_trip trip; + + ret = thermal_zone_get_trip(tzd, i, &trip); if (ret) goto err; - hyst /= MCELSIUS; - data->tmu_set_trip_hyst(data, i, temp, hyst); + + data->tmu_set_trip_temp(data, i, trip.temperature / MCELSIUS); + data->tmu_set_trip_hyst(data, i, trip.temperature / MCELSIUS, + trip.hysteresis / MCELSIUS); } data->tmu_clear_irqs(data); @@ -360,21 +349,23 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) } static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data, - int trip, u8 temp) + int trip_id, u8 temp) { - const struct thermal_trip * const trips = - of_thermal_get_trip_points(data->tzd); + struct thermal_trip trip; u8 ref, th_code; - ref = trips[0].temperature / MCELSIUS; + if (thermal_zone_get_trip(data->tzd, 0, &trip)) + return; - if (trip == 0) { + ref = trip.temperature / MCELSIUS; + + if (trip_id == 0) { th_code = temp_to_code(data, ref); writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP); } temp -= ref; - writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip * 4); + writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip_id * 4); } /* failing thresholds are not supported on Exynos4210 */ -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Daniel Lezcano <daniel.lezcano@linaro.org> To: daniel.lezcano@linaro.org, rafael@kernel.org Cc: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, rui.zhang@intel.com, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>, Amit Kucheria <amitk@kernel.org>, Alim Akhtar <alim.akhtar@samsung.com>, linux-samsung-soc@vger.kernel.org (open list:SAMSUNG THERMAL DRIVER), linux-arm-kernel@lists.infradead.org (moderated list:ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES) Subject: [PATCH v6 07/29] thermal/drivers/exynos: Use generic thermal_zone_get_trip() function Date: Tue, 27 Sep 2022 16:32:17 +0200 [thread overview] Message-ID: <20220927143239.376737-8-daniel.lezcano@linaro.org> (raw) In-Reply-To: <20220927143239.376737-1-daniel.lezcano@linaro.org> The thermal framework gives the possibility to register the trip points with the thermal zone. When that is done, no get_trip_* ops are needed and they can be removed. Convert ops content logic into generic trip points and register them with the thermal zone. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- drivers/thermal/samsung/exynos_tmu.c | 41 +++++++++++----------------- 1 file changed, 16 insertions(+), 25 deletions(-) diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 51874d0a284c..0e33d32a9d2e 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -260,16 +260,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct thermal_zone_device *tzd = data->tzd; - const struct thermal_trip * const trips = - of_thermal_get_trip_points(tzd); unsigned int status; - int ret = 0, temp, hyst; - - if (!trips) { - dev_err(&pdev->dev, - "Cannot get trip points from device tree!\n"); - return -ENODEV; - } + int ret = 0, temp; if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */ ret = tzd->ops->get_crit_temp(tzd, &temp); @@ -303,19 +295,16 @@ static int exynos_tmu_initialize(struct platform_device *pdev) /* Write temperature code for rising and falling threshold */ for (i = 0; i < ntrips; i++) { - /* Write temperature code for rising threshold */ - ret = tzd->ops->get_trip_temp(tzd, i, &temp); - if (ret) - goto err; - temp /= MCELSIUS; - data->tmu_set_trip_temp(data, i, temp); - /* Write temperature code for falling threshold */ - ret = tzd->ops->get_trip_hyst(tzd, i, &hyst); + struct thermal_trip trip; + + ret = thermal_zone_get_trip(tzd, i, &trip); if (ret) goto err; - hyst /= MCELSIUS; - data->tmu_set_trip_hyst(data, i, temp, hyst); + + data->tmu_set_trip_temp(data, i, trip.temperature / MCELSIUS); + data->tmu_set_trip_hyst(data, i, trip.temperature / MCELSIUS, + trip.hysteresis / MCELSIUS); } data->tmu_clear_irqs(data); @@ -360,21 +349,23 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) } static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data, - int trip, u8 temp) + int trip_id, u8 temp) { - const struct thermal_trip * const trips = - of_thermal_get_trip_points(data->tzd); + struct thermal_trip trip; u8 ref, th_code; - ref = trips[0].temperature / MCELSIUS; + if (thermal_zone_get_trip(data->tzd, 0, &trip)) + return; - if (trip == 0) { + ref = trip.temperature / MCELSIUS; + + if (trip_id == 0) { th_code = temp_to_code(data, ref); writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP); } temp -= ref; - writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip * 4); + writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip_id * 4); } /* failing thresholds are not supported on Exynos4210 */ -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-27 14:34 UTC|newest] Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-27 14:32 [PATCH v5 00/30] Rework the trip points creation Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 01/29] thermal/core: Add a generic thermal_zone_get_trip() function Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 02/29] thermal/sysfs: Always expose hysteresis attributes Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 03/29] thermal/core: Add a generic thermal_zone_set_trip() function Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 04/29] thermal/core/governors: Use thermal_zone_get_trip() instead of ops functions Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 05/29] thermal/of: Use generic thermal_zone_get_trip() function Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 06/29] thermal/of: Remove unused functions Daniel Lezcano 2022-09-27 14:32 ` Daniel Lezcano [this message] 2022-09-27 14:32 ` [PATCH v6 07/29] thermal/drivers/exynos: Use generic thermal_zone_get_trip() function Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 08/29] thermal/drivers/exynos: of_thermal_get_ntrips() Daniel Lezcano 2022-09-27 14:32 ` Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 09/29] thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by thermal_zone_get_trip() Daniel Lezcano 2022-09-27 14:32 ` Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 10/29] thermal/drivers/tegra: Use generic thermal_zone_get_trip() function Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 11/29] thermal/drivers/uniphier: " Daniel Lezcano 2022-09-27 14:32 ` Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 12/29] thermal/drivers/hisi: " Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 13/29] thermal/drivers/qcom: " Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 14/29] thermal/drivers/armada: " Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 15/29] thermal/drivers/rcar_gen3: Use the generic function to get the number of trips Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 16/29] thermal/of: Remove of_thermal_get_ntrips() Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 17/29] thermal/of: Remove of_thermal_is_trip_valid() Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 18/29] thermal/of: Remove of_thermal_set_trip_hyst() Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 19/29] thermal/of: Remove of_thermal_get_crit_temp() Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 20/29] thermal/drivers/st: Use generic trip points Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 21/29] thermal/drivers/imx: Use generic thermal_zone_get_trip() function Daniel Lezcano 2022-09-27 14:32 ` Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 22/29] thermal/drivers/rcar: " Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 23/29] thermal/drivers/broadcom: " Daniel Lezcano 2022-09-27 14:32 ` Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 24/29] thermal/drivers/da9062: " Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 25/29] thermal/drivers/ti: Remove unused macros ti_thermal_get_trip_value() / ti_thermal_trip_is_valid() Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 26/29] thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 27/29] thermal/drivers/cxgb4: " Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 28/29] thermal/intel/int340x: Replace parameter to simplify Daniel Lezcano 2022-09-27 14:32 ` [PATCH v6 29/29] thermal/drivers/intel: Use generic thermal_zone_get_trip() function Daniel Lezcano 2022-09-27 14:35 ` [PATCH v5 00/30] Rework the trip points creation Dmitry Baryshkov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220927143239.376737-8-daniel.lezcano@linaro.org \ --to=daniel.lezcano@linaro.org \ --cc=alim.akhtar@samsung.com \ --cc=amitk@kernel.org \ --cc=bzolnier@gmail.com \ --cc=krzysztof.kozlowski@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=rafael@kernel.org \ --cc=rui.zhang@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.