From: Hal Feng <hal.feng@linux.starfivetech.com> To: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Paul Walmsley <paul.walmsley@sifive.com>, Palmer Dabbelt <palmer@dabbelt.com>, Albert Ou <aou@eecs.berkeley.edu>, Daniel Lezcano <daniel.lezcano@linaro.org>, Thomas Gleixner <tglx@linutronix.de>, Marc Zyngier <maz@kernel.org>, Philipp Zabel <p.zabel@pengutronix.de>, Stephen Boyd <sboyd@kernel.org>, Michael Turquette <mturquette@baylibre.com>, Linus Walleij <linus.walleij@linaro.org>, Emil Renner Berthing <kernel@esmil.dk>, Hal Feng <hal.feng@linux.starfivetech.com>, linux-kernel@vger.kernel.org Subject: [PATCH v1 00/30] Basic StarFive JH7110 RISC-V SoC support Date: Thu, 29 Sep 2022 22:31:55 +0800 [thread overview] Message-ID: <20220929143225.17907-1-hal.feng@linux.starfivetech.com> (raw) This series adds basic support for the StarFive JH7110 RISC-V SoC to boot up and get a serial console. This series includes basic clock, reset, pinctrl and uart drivers, which are necessary for booting. It's should be noted that the reset and clock driver codes of JH7110 are partly common with those of JH7100, so the common codes are factored out and can be reused by drivers of JH7110 and other more SoCs from StarFive. The JH7110 is the upgraded version of JH7100 and also the first official released version of JH71XX series SoCs from StarFive Technology Ltd. The VisionFive 2 boards equipped with JH7110 SoCs are launched recently [1]. More information and support can visit RVspace wiki [2]. This series is also available at https://github.com/hal-feng/linux/commits/visionfive2-minimal [1] https://www.cnx-software.com/2022/08/23/starfive-visionfive-2-quad-core-risc-v-sbc-linux/ [2] https://wiki.rvspace.org/ Emil Renner Berthing (17): dt-bindings: riscv: Add StarFive JH7110 bindings dt-bindings: timer: Add StarFive JH7110 clint dt-bindings: interrupt-controller: Add StarFive JH7110 plic dt-bindings: sifive-l2-cache: Support StarFive JH71x0 SoCs soc: sifive: l2 cache: Convert to platform driver soc: sifive: l2 cache: Add StarFive JH71x0 support reset: starfive: jh7100: Use 32bit I/O on 32bit registers dt-bindings: reset: Add StarFive JH7110 reset definitions clk: starfive: Factor out common clock driver code dt-bindings: clock: Add StarFive JH7110 system clock definitions dt-bindings: clock: Add starfive,jh7110-clkgen-sys bindings clk: starfive: Add StarFive JH7110 system clock driver dt-bindings: clock: Add StarFive JH7110 always-on definitions dt-bindings: clock: Add starfive,jh7110-clkgen-aon bindings clk: starfive: Add StarFive JH7110 always-on clock driver RISC-V: Add initial StarFive JH7110 device tree RISC-V: Add StarFive JH7110 VisionFive2 board device tree Hal Feng (8): reset: starfive: jh7100: Use regmap APIs to operate registers reset: starfive: jh7100: Move necessary properties to device tree reset: starfive: Rename 'reset-starfive-jh7100.c' to 'reset-starfive.c' dt-bindings: reset: Add starfive,jh7110-reset bindings reset: starfive: Add StarFive JH7110 SoC support clk: starfive: Use regmap APIs to operate registers RISC-V: defconfig: Enable CONFIG_SERIAL_8250_DW RISC-V: Add StarFive JH7100 and JH7110 SoC Kconfig options Jianlong Huang (5): pinctrl: Create subdirectory for StarFive drivers pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" dt-bindings: pinctrl: Add StarFive JH7110 pinctrl definitions dt-bindings: pinctrl: Add StarFive JH7110 pinctrl bindings pinctrl: starfive: Add StarFive JH7110 driver .../clock/starfive,jh7110-clkgen-aon.yaml | 62 ++ .../clock/starfive,jh7110-clkgen-sys.yaml | 69 ++ .../sifive,plic-1.0.0.yaml | 1 + .../pinctrl/starfive,jh7100-pinctrl.yaml | 2 +- .../pinctrl/starfive,jh7110-pinctrl.yaml | 202 ++++ .../bindings/reset/starfive,jh7100-reset.yaml | 20 + .../bindings/reset/starfive,jh7110-reset.yaml | 54 + .../bindings/riscv/sifive-l2-cache.yaml | 4 + .../devicetree/bindings/riscv/starfive.yaml | 3 + .../bindings/timer/sifive,clint.yaml | 1 + MAINTAINERS | 27 +- arch/riscv/Kconfig.socs | 28 +- arch/riscv/boot/dts/starfive/Makefile | 3 +- .../dts/starfive/jh7100-beaglev-starlight.dts | 2 +- arch/riscv/boot/dts/starfive/jh7100.dtsi | 3 + .../jh7110-starfive-visionfive-v2.dts | 91 ++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 449 +++++++++ arch/riscv/configs/defconfig | 1 + drivers/clk/starfive/Kconfig | 29 +- drivers/clk/starfive/Makefile | 6 +- .../clk/starfive/clk-starfive-jh7100-audio.c | 138 +-- drivers/clk/starfive/clk-starfive-jh7100.c | 836 +++++----------- drivers/clk/starfive/clk-starfive-jh7100.h | 112 --- .../clk/starfive/clk-starfive-jh7110-aon.c | 161 +++ .../clk/starfive/clk-starfive-jh7110-sys.c | 648 ++++++++++++ drivers/clk/starfive/clk-starfive.c | 349 +++++++ drivers/clk/starfive/clk-starfive.h | 112 +++ drivers/pinctrl/Kconfig | 18 +- drivers/pinctrl/Makefile | 2 +- drivers/pinctrl/starfive/Kconfig | 37 + drivers/pinctrl/starfive/Makefile | 8 + drivers/pinctrl/starfive/pinctrl-jh7110-aon.c | 718 ++++++++++++++ drivers/pinctrl/starfive/pinctrl-jh7110-sys.c | 925 +++++++++++++++++ .../pinctrl-starfive-jh7100.c} | 10 +- drivers/pinctrl/starfive/pinctrl-starfive.c | 539 ++++++++++ drivers/pinctrl/starfive/pinctrl-starfive.h | 131 +++ drivers/reset/Kconfig | 7 +- drivers/reset/Makefile | 2 +- drivers/reset/reset-starfive-jh7100.c | 173 ---- drivers/reset/reset-starfive.c | 218 ++++ drivers/soc/Makefile | 2 +- drivers/soc/sifive/Kconfig | 2 +- drivers/soc/sifive/sifive_l2_cache.c | 86 +- .../dt-bindings/clock/starfive-jh7110-aon.h | 26 + .../dt-bindings/clock/starfive-jh7110-sys.h | 215 ++++ ...l-starfive.h => pinctrl-starfive-jh7100.h} | 6 +- .../pinctrl/pinctrl-starfive-jh7110.h | 931 ++++++++++++++++++ include/dt-bindings/reset/starfive-jh7110.h | 154 +++ 48 files changed, 6604 insertions(+), 1019 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-clkgen-aon.yaml create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-clkgen-sys.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/reset/starfive,jh7110-reset.yaml create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi delete mode 100644 drivers/clk/starfive/clk-starfive-jh7100.h create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-aon.c create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-sys.c create mode 100644 drivers/clk/starfive/clk-starfive.c create mode 100644 drivers/clk/starfive/clk-starfive.h create mode 100644 drivers/pinctrl/starfive/Kconfig create mode 100644 drivers/pinctrl/starfive/Makefile create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-aon.c create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-sys.c rename drivers/pinctrl/{pinctrl-starfive.c => starfive/pinctrl-starfive-jh7100.c} (99%) create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.c create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.h delete mode 100644 drivers/reset/reset-starfive-jh7100.c create mode 100644 drivers/reset/reset-starfive.c create mode 100644 include/dt-bindings/clock/starfive-jh7110-aon.h create mode 100644 include/dt-bindings/clock/starfive-jh7110-sys.h rename include/dt-bindings/pinctrl/{pinctrl-starfive.h => pinctrl-starfive-jh7100.h} (98%) create mode 100644 include/dt-bindings/pinctrl/pinctrl-starfive-jh7110.h create mode 100644 include/dt-bindings/reset/starfive-jh7110.h -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Hal Feng <hal.feng@linux.starfivetech.com> To: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Paul Walmsley <paul.walmsley@sifive.com>, Palmer Dabbelt <palmer@dabbelt.com>, Albert Ou <aou@eecs.berkeley.edu>, Daniel Lezcano <daniel.lezcano@linaro.org>, Thomas Gleixner <tglx@linutronix.de>, Marc Zyngier <maz@kernel.org>, Philipp Zabel <p.zabel@pengutronix.de>, Stephen Boyd <sboyd@kernel.org>, Michael Turquette <mturquette@baylibre.com>, Linus Walleij <linus.walleij@linaro.org>, Emil Renner Berthing <kernel@esmil.dk>, Hal Feng <hal.feng@linux.starfivetech.com>, linux-kernel@vger.kernel.org Subject: [PATCH v1 00/30] Basic StarFive JH7110 RISC-V SoC support Date: Thu, 29 Sep 2022 22:31:55 +0800 [thread overview] Message-ID: <20220929143225.17907-1-hal.feng@linux.starfivetech.com> (raw) This series adds basic support for the StarFive JH7110 RISC-V SoC to boot up and get a serial console. This series includes basic clock, reset, pinctrl and uart drivers, which are necessary for booting. It's should be noted that the reset and clock driver codes of JH7110 are partly common with those of JH7100, so the common codes are factored out and can be reused by drivers of JH7110 and other more SoCs from StarFive. The JH7110 is the upgraded version of JH7100 and also the first official released version of JH71XX series SoCs from StarFive Technology Ltd. The VisionFive 2 boards equipped with JH7110 SoCs are launched recently [1]. More information and support can visit RVspace wiki [2]. This series is also available at https://github.com/hal-feng/linux/commits/visionfive2-minimal [1] https://www.cnx-software.com/2022/08/23/starfive-visionfive-2-quad-core-risc-v-sbc-linux/ [2] https://wiki.rvspace.org/ Emil Renner Berthing (17): dt-bindings: riscv: Add StarFive JH7110 bindings dt-bindings: timer: Add StarFive JH7110 clint dt-bindings: interrupt-controller: Add StarFive JH7110 plic dt-bindings: sifive-l2-cache: Support StarFive JH71x0 SoCs soc: sifive: l2 cache: Convert to platform driver soc: sifive: l2 cache: Add StarFive JH71x0 support reset: starfive: jh7100: Use 32bit I/O on 32bit registers dt-bindings: reset: Add StarFive JH7110 reset definitions clk: starfive: Factor out common clock driver code dt-bindings: clock: Add StarFive JH7110 system clock definitions dt-bindings: clock: Add starfive,jh7110-clkgen-sys bindings clk: starfive: Add StarFive JH7110 system clock driver dt-bindings: clock: Add StarFive JH7110 always-on definitions dt-bindings: clock: Add starfive,jh7110-clkgen-aon bindings clk: starfive: Add StarFive JH7110 always-on clock driver RISC-V: Add initial StarFive JH7110 device tree RISC-V: Add StarFive JH7110 VisionFive2 board device tree Hal Feng (8): reset: starfive: jh7100: Use regmap APIs to operate registers reset: starfive: jh7100: Move necessary properties to device tree reset: starfive: Rename 'reset-starfive-jh7100.c' to 'reset-starfive.c' dt-bindings: reset: Add starfive,jh7110-reset bindings reset: starfive: Add StarFive JH7110 SoC support clk: starfive: Use regmap APIs to operate registers RISC-V: defconfig: Enable CONFIG_SERIAL_8250_DW RISC-V: Add StarFive JH7100 and JH7110 SoC Kconfig options Jianlong Huang (5): pinctrl: Create subdirectory for StarFive drivers pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" dt-bindings: pinctrl: Add StarFive JH7110 pinctrl definitions dt-bindings: pinctrl: Add StarFive JH7110 pinctrl bindings pinctrl: starfive: Add StarFive JH7110 driver .../clock/starfive,jh7110-clkgen-aon.yaml | 62 ++ .../clock/starfive,jh7110-clkgen-sys.yaml | 69 ++ .../sifive,plic-1.0.0.yaml | 1 + .../pinctrl/starfive,jh7100-pinctrl.yaml | 2 +- .../pinctrl/starfive,jh7110-pinctrl.yaml | 202 ++++ .../bindings/reset/starfive,jh7100-reset.yaml | 20 + .../bindings/reset/starfive,jh7110-reset.yaml | 54 + .../bindings/riscv/sifive-l2-cache.yaml | 4 + .../devicetree/bindings/riscv/starfive.yaml | 3 + .../bindings/timer/sifive,clint.yaml | 1 + MAINTAINERS | 27 +- arch/riscv/Kconfig.socs | 28 +- arch/riscv/boot/dts/starfive/Makefile | 3 +- .../dts/starfive/jh7100-beaglev-starlight.dts | 2 +- arch/riscv/boot/dts/starfive/jh7100.dtsi | 3 + .../jh7110-starfive-visionfive-v2.dts | 91 ++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 449 +++++++++ arch/riscv/configs/defconfig | 1 + drivers/clk/starfive/Kconfig | 29 +- drivers/clk/starfive/Makefile | 6 +- .../clk/starfive/clk-starfive-jh7100-audio.c | 138 +-- drivers/clk/starfive/clk-starfive-jh7100.c | 836 +++++----------- drivers/clk/starfive/clk-starfive-jh7100.h | 112 --- .../clk/starfive/clk-starfive-jh7110-aon.c | 161 +++ .../clk/starfive/clk-starfive-jh7110-sys.c | 648 ++++++++++++ drivers/clk/starfive/clk-starfive.c | 349 +++++++ drivers/clk/starfive/clk-starfive.h | 112 +++ drivers/pinctrl/Kconfig | 18 +- drivers/pinctrl/Makefile | 2 +- drivers/pinctrl/starfive/Kconfig | 37 + drivers/pinctrl/starfive/Makefile | 8 + drivers/pinctrl/starfive/pinctrl-jh7110-aon.c | 718 ++++++++++++++ drivers/pinctrl/starfive/pinctrl-jh7110-sys.c | 925 +++++++++++++++++ .../pinctrl-starfive-jh7100.c} | 10 +- drivers/pinctrl/starfive/pinctrl-starfive.c | 539 ++++++++++ drivers/pinctrl/starfive/pinctrl-starfive.h | 131 +++ drivers/reset/Kconfig | 7 +- drivers/reset/Makefile | 2 +- drivers/reset/reset-starfive-jh7100.c | 173 ---- drivers/reset/reset-starfive.c | 218 ++++ drivers/soc/Makefile | 2 +- drivers/soc/sifive/Kconfig | 2 +- drivers/soc/sifive/sifive_l2_cache.c | 86 +- .../dt-bindings/clock/starfive-jh7110-aon.h | 26 + .../dt-bindings/clock/starfive-jh7110-sys.h | 215 ++++ ...l-starfive.h => pinctrl-starfive-jh7100.h} | 6 +- .../pinctrl/pinctrl-starfive-jh7110.h | 931 ++++++++++++++++++ include/dt-bindings/reset/starfive-jh7110.h | 154 +++ 48 files changed, 6604 insertions(+), 1019 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-clkgen-aon.yaml create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-clkgen-sys.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7110-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/reset/starfive,jh7110-reset.yaml create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi delete mode 100644 drivers/clk/starfive/clk-starfive-jh7100.h create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-aon.c create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-sys.c create mode 100644 drivers/clk/starfive/clk-starfive.c create mode 100644 drivers/clk/starfive/clk-starfive.h create mode 100644 drivers/pinctrl/starfive/Kconfig create mode 100644 drivers/pinctrl/starfive/Makefile create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-aon.c create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-sys.c rename drivers/pinctrl/{pinctrl-starfive.c => starfive/pinctrl-starfive-jh7100.c} (99%) create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.c create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.h delete mode 100644 drivers/reset/reset-starfive-jh7100.c create mode 100644 drivers/reset/reset-starfive.c create mode 100644 include/dt-bindings/clock/starfive-jh7110-aon.h create mode 100644 include/dt-bindings/clock/starfive-jh7110-sys.h rename include/dt-bindings/pinctrl/{pinctrl-starfive.h => pinctrl-starfive-jh7100.h} (98%) create mode 100644 include/dt-bindings/pinctrl/pinctrl-starfive-jh7110.h create mode 100644 include/dt-bindings/reset/starfive-jh7110.h -- 2.17.1 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv
next reply other threads:[~2022-09-29 14:33 UTC|newest] Thread overview: 210+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-29 14:31 Hal Feng [this message] 2022-09-29 14:31 ` [PATCH v1 00/30] Basic StarFive JH7110 RISC-V SoC support Hal Feng 2022-09-29 14:31 ` [PATCH v1 01/30] dt-bindings: riscv: Add StarFive JH7110 bindings Hal Feng 2022-09-29 14:31 ` Hal Feng 2022-09-29 14:34 ` Krzysztof Kozlowski 2022-09-29 14:34 ` Krzysztof Kozlowski 2022-10-08 3:44 ` Hal Feng 2022-10-08 3:44 ` Hal Feng 2022-09-29 14:31 ` [PATCH v1 02/30] dt-bindings: timer: Add StarFive JH7110 clint Hal Feng 2022-09-29 14:31 ` Hal Feng 2022-09-29 14:34 ` Krzysztof Kozlowski 2022-09-29 14:34 ` Krzysztof Kozlowski 2022-09-29 14:31 ` [PATCH v1 03/30] dt-bindings: interrupt-controller: Add StarFive JH7110 plic Hal Feng 2022-09-29 14:31 ` Hal Feng 2022-09-29 14:35 ` Krzysztof Kozlowski 2022-09-29 14:35 ` Krzysztof Kozlowski 2022-09-29 14:31 ` [PATCH v1 04/30] dt-bindings: sifive-l2-cache: Support StarFive JH71x0 SoCs Hal Feng 2022-09-29 14:31 ` Hal Feng 2022-09-29 14:36 ` Krzysztof Kozlowski 2022-09-29 14:36 ` Krzysztof Kozlowski 2022-09-29 15:33 ` Conor Dooley 2022-09-29 15:33 ` Conor Dooley 2022-10-03 9:26 ` Ben Dooks 2022-10-03 9:26 ` Ben Dooks 2022-10-08 18:54 ` Hal Feng 2022-10-08 18:54 ` Hal Feng 2022-09-29 14:32 ` [PATCH v1 05/30] soc: sifive: l2 cache: Convert to platform driver Hal Feng 2022-09-29 14:32 ` Hal Feng 2022-09-29 15:32 ` Conor Dooley 2022-09-29 15:32 ` Conor Dooley 2022-09-29 17:57 ` Ben Dooks 2022-09-29 17:57 ` Ben Dooks 2022-10-05 13:44 ` Emil Renner Berthing 2022-10-05 13:44 ` Emil Renner Berthing 2022-10-05 13:48 ` Ben Dooks 2022-10-05 13:48 ` Ben Dooks 2022-10-05 13:55 ` Emil Renner Berthing 2022-10-05 13:55 ` Emil Renner Berthing 2022-10-05 14:05 ` Conor Dooley 2022-10-05 14:05 ` Conor Dooley 2022-10-08 18:07 ` Hal Feng 2022-10-08 18:07 ` Hal Feng 2022-09-29 14:32 ` [PATCH v1 06/30] soc: sifive: l2 cache: Add StarFive JH71x0 support Hal Feng 2022-09-29 14:32 ` Hal Feng 2022-09-29 14:32 ` [PATCH v1 07/30] reset: starfive: jh7100: Use 32bit I/O on 32bit registers Hal Feng 2022-09-29 14:32 ` Hal Feng 2022-09-29 14:32 ` [PATCH v1 08/30] reset: starfive: jh7100: Use regmap APIs to operate registers Hal Feng 2022-09-29 14:32 ` Hal Feng 2022-09-29 14:32 ` [PATCH v1 09/30] reset: starfive: jh7100: Move necessary properties to device tree Hal Feng 2022-09-29 14:32 ` Hal Feng 2022-09-30 20:49 ` Rob Herring 2022-09-30 20:49 ` Rob Herring 2022-10-05 13:20 ` Emil Renner Berthing 2022-10-05 13:20 ` Emil Renner Berthing 2022-09-29 14:32 ` [PATCH v1 10/30] reset: starfive: Rename 'reset-starfive-jh7100.c' to 'reset-starfive.c' Hal Feng 2022-09-29 14:32 ` Hal Feng 2022-09-29 14:45 ` [PATCH v1 00/30] Basic StarFive JH7110 RISC-V SoC support Krzysztof Kozlowski 2022-09-29 14:45 ` Krzysztof Kozlowski 2022-09-29 17:59 ` Conor Dooley 2022-09-29 17:59 ` Conor Dooley 2022-10-01 1:13 ` hal.feng 2022-10-01 1:13 ` hal.feng 2022-09-29 16:35 ` [PATCH v1 11/30] dt-bindings: reset: Add StarFive JH7110 reset definitions Hal Feng 2022-09-29 16:35 ` Hal Feng 2022-09-29 17:51 ` [PATCH v1 12/30] dt-bindings: reset: Add starfive,jh7110-reset bindings Hal Feng 2022-09-29 17:51 ` Hal Feng 2022-09-29 18:21 ` Rob Herring 2022-09-29 18:21 ` Rob Herring 2022-09-29 18:40 ` Rob Herring 2022-09-29 18:40 ` Rob Herring 2022-09-29 18:43 ` Rob Herring 2022-09-29 18:43 ` Rob Herring 2022-10-11 15:30 ` Hal Feng 2022-10-11 15:30 ` Hal Feng 2022-10-11 16:36 ` Krzysztof Kozlowski 2022-10-11 16:36 ` Krzysztof Kozlowski 2022-10-12 13:16 ` Hal Feng 2022-10-12 13:16 ` Hal Feng 2022-10-12 13:33 ` Krzysztof Kozlowski 2022-10-12 13:33 ` Krzysztof Kozlowski 2022-10-12 14:05 ` Conor Dooley 2022-10-12 14:05 ` Conor Dooley 2022-10-12 15:21 ` Hal Feng 2022-10-12 15:21 ` Hal Feng 2022-10-12 14:53 ` Hal Feng 2022-10-12 14:53 ` Hal Feng 2022-10-12 8:01 ` Emil Renner Berthing 2022-10-12 8:01 ` Emil Renner Berthing 2022-09-29 17:53 ` [PATCH v1 13/30] reset: starfive: Add StarFive JH7110 SoC support Hal Feng 2022-09-29 17:53 ` Hal Feng 2022-09-29 17:54 ` [PATCH v1 14/30] clk: starfive: Factor out common clock driver code Hal Feng 2022-09-29 17:54 ` Hal Feng 2022-09-30 21:43 ` Stephen Boyd 2022-09-30 21:43 ` Stephen Boyd 2022-09-29 17:56 ` [PATCH v1 15/30] clk: starfive: Use regmap APIs to operate registers Hal Feng 2022-09-29 17:56 ` Hal Feng 2022-09-30 21:48 ` Stephen Boyd 2022-09-30 21:48 ` Stephen Boyd 2022-10-05 13:14 ` Emil Renner Berthing 2022-10-05 13:14 ` Emil Renner Berthing 2022-10-12 23:05 ` Stephen Boyd 2022-10-12 23:05 ` Stephen Boyd 2022-10-23 4:11 ` Hal Feng 2022-10-23 4:11 ` Hal Feng 2022-10-23 10:25 ` Conor Dooley 2022-10-23 10:25 ` Conor Dooley 2022-10-28 3:16 ` Hal Feng 2022-10-28 3:16 ` Hal Feng 2022-10-27 1:26 ` Stephen Boyd 2022-10-27 1:26 ` Stephen Boyd 2022-10-28 2:46 ` Hal Feng 2022-10-28 2:46 ` Hal Feng 2022-09-29 17:56 ` [PATCH v1 16/30] dt-bindings: clock: Add StarFive JH7110 system clock definitions Hal Feng 2022-09-29 17:56 ` Hal Feng 2022-09-29 22:26 ` [PATCH v1 17/30] dt-bindings: clock: Add starfive,jh7110-clkgen-sys bindings Hal Feng 2022-09-29 22:26 ` Hal Feng 2022-09-30 1:55 ` Rob Herring 2022-09-30 1:55 ` Rob Herring 2022-09-30 10:58 ` Krzysztof Kozlowski 2022-09-30 10:58 ` Krzysztof Kozlowski 2022-10-11 17:52 ` Hal Feng 2022-10-11 17:52 ` Hal Feng 2022-09-30 1:50 ` [PATCH v1 18/30] clk: starfive: Add StarFive JH7110 system clock driver Hal Feng 2022-09-30 1:50 ` Hal Feng 2022-09-30 5:49 ` [PATCH v1 19/30] dt-bindings: clock: Add StarFive JH7110 always-on definitions Hal Feng 2022-09-30 5:49 ` Hal Feng 2022-09-30 5:56 ` [PATCH v1 20/30] dt-bindings: clock: Add starfive,jh7110-clkgen-aon bindings Hal Feng 2022-09-30 5:56 ` Hal Feng 2022-09-30 10:59 ` Krzysztof Kozlowski 2022-09-30 10:59 ` Krzysztof Kozlowski 2022-10-11 18:01 ` Hal Feng 2022-10-11 18:01 ` Hal Feng 2022-09-30 12:51 ` Rob Herring 2022-09-30 12:51 ` Rob Herring 2022-09-30 6:03 ` [PATCH v1 21/30] clk: starfive: Add StarFive JH7110 always-on clock driver Hal Feng 2022-09-30 6:03 ` Hal Feng 2022-09-30 6:08 ` [PATCH v1 22/30] pinctrl: Create subdirectory for StarFive drivers Hal Feng 2022-09-30 6:08 ` Hal Feng 2022-10-04 8:43 ` Linus Walleij 2022-10-04 8:43 ` Linus Walleij 2022-09-30 6:14 ` [PATCH v1 23/30] pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" Hal Feng 2022-09-30 6:14 ` Hal Feng 2022-09-30 21:28 ` Rob Herring 2022-09-30 21:28 ` Rob Herring 2022-10-04 8:48 ` Linus Walleij 2022-10-04 8:48 ` Linus Walleij 2022-10-04 8:58 ` Conor Dooley 2022-10-04 8:58 ` Conor Dooley 2022-10-04 9:13 ` Linus Walleij 2022-10-04 9:13 ` Linus Walleij 2022-10-04 9:21 ` Conor Dooley 2022-10-04 9:21 ` Conor Dooley 2022-10-04 9:24 ` Conor Dooley 2022-10-04 9:24 ` Conor Dooley 2022-10-06 9:07 ` Geert Uytterhoeven 2022-10-06 9:07 ` Geert Uytterhoeven 2022-09-30 7:33 ` [PATCH v1 24/30] dt-bindings: pinctrl: Add StarFive JH7110 pinctrl definitions Hal Feng 2022-09-30 7:33 ` Hal Feng 2022-09-30 11:00 ` Krzysztof Kozlowski 2022-09-30 11:00 ` Krzysztof Kozlowski 2022-09-30 7:38 ` [PATCH v1 25/30] dt-bindings: pinctrl: Add StarFive JH7110 pinctrl bindings Hal Feng 2022-09-30 7:38 ` Hal Feng 2022-09-30 11:05 ` Krzysztof Kozlowski 2022-09-30 11:05 ` Krzysztof Kozlowski 2022-09-30 12:16 ` Rob Herring 2022-09-30 12:16 ` Rob Herring 2022-10-20 7:28 ` Icenowy Zheng 2022-10-20 7:28 ` Icenowy Zheng 2022-09-30 7:43 ` [PATCH v1 26/30] pinctrl: starfive: Add StarFive JH7110 driver Hal Feng 2022-09-30 7:43 ` Hal Feng 2022-10-01 14:35 ` kernel test robot 2022-10-01 14:35 ` kernel test robot 2022-10-04 8:56 ` Linus Walleij 2022-10-04 8:56 ` Linus Walleij 2022-10-05 13:31 ` Emil Renner Berthing 2022-10-05 13:31 ` Emil Renner Berthing 2022-10-14 2:05 ` Hal Feng 2022-10-14 2:05 ` Hal Feng 2022-09-30 7:49 ` [PATCH v1 27/30] RISC-V: Add initial StarFive JH7110 device tree Hal Feng 2022-09-30 7:49 ` Hal Feng 2022-10-01 10:52 ` Conor Dooley 2022-10-01 10:52 ` Conor Dooley 2022-10-03 7:45 ` Krzysztof Kozlowski 2022-10-03 7:45 ` Krzysztof Kozlowski 2022-10-14 9:41 ` Hal Feng 2022-10-14 9:41 ` Hal Feng 2022-09-30 7:53 ` [PATCH v1 28/30] RISC-V: Add StarFive JH7110 VisionFive2 board " Hal Feng 2022-09-30 7:53 ` Hal Feng 2022-10-01 11:14 ` Conor Dooley 2022-10-01 11:14 ` Conor Dooley 2022-10-29 8:18 ` Hal Feng 2022-10-29 8:18 ` Hal Feng 2022-09-30 9:06 ` [PATCH v1 29/30] RISC-V: defconfig: Enable CONFIG_SERIAL_8250_DW Hal Feng 2022-09-30 9:06 ` Hal Feng 2022-09-30 20:54 ` Ben Dooks 2022-09-30 20:54 ` Ben Dooks 2022-09-30 21:41 ` Conor Dooley 2022-09-30 21:41 ` Conor Dooley 2022-10-14 3:24 ` Hal Feng 2022-10-14 3:24 ` Hal Feng 2022-09-30 12:23 ` [PATCH v1 30/30] RISC-V: Add StarFive JH7100 and JH7110 SoC Kconfig options Hal Feng 2022-09-30 12:23 ` Hal Feng 2022-09-30 12:37 ` Conor Dooley 2022-09-30 12:37 ` Conor Dooley 2022-10-11 18:32 ` Hal Feng 2022-10-11 18:32 ` Hal Feng 2022-10-05 13:05 ` [PATCH v1 00/30] Basic StarFive JH7110 RISC-V SoC support Emil Renner Berthing 2022-10-05 13:05 ` Emil Renner Berthing 2022-10-08 3:18 ` Hal Feng 2022-10-08 3:18 ` Hal Feng
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220929143225.17907-1-hal.feng@linux.starfivetech.com \ --to=hal.feng@linux.starfivetech.com \ --cc=aou@eecs.berkeley.edu \ --cc=daniel.lezcano@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=kernel@esmil.dk \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linus.walleij@linaro.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-riscv@lists.infradead.org \ --cc=maz@kernel.org \ --cc=mturquette@baylibre.com \ --cc=p.zabel@pengutronix.de \ --cc=palmer@dabbelt.com \ --cc=paul.walmsley@sifive.com \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ --cc=tglx@linutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.