All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jimmy Assarsson <extja@kvaser.com>
To: linux-can@vger.kernel.org, Marc Kleine-Budde <mkl@pengutronix.de>,
	Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: Jimmy Assarsson <jimmyassarsson@gmail.com>,
	stable@vger.kernel.org, Jimmy Assarsson <extja@kvaser.com>
Subject: [PATCH v5 1/4] can: kvaser_usb_leaf: Fix overread with an invalid command
Date: Mon, 10 Oct 2022 17:08:26 +0200	[thread overview]
Message-ID: <20221010150829.199676-2-extja@kvaser.com> (raw)
In-Reply-To: <20221010150829.199676-1-extja@kvaser.com>

From: Anssi Hannula <anssi.hannula@bitwise.fi>

For command events read from the device,
kvaser_usb_leaf_read_bulk_callback() verifies that cmd->len does not
exceed the size of the received data, but the actual kvaser_cmd handlers
will happily read any kvaser_cmd fields without checking for cmd->len.

This can cause an overread if the last cmd in the buffer is shorter than
expected for the command type (with cmd->len showing the actual short
size).

Maximum overread seems to be 22 bytes (CMD_LEAF_LOG_MESSAGE), some of
which are delivered to userspace as-is.

Fix that by verifying the length of command before handling it.

This issue can only occur after RX URBs have been set up, i.e. the
interface has been opened at least once.

Cc: stable@vger.kernel.org
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
---
Changes in v5:
 - Split series and rebased

Changes in v4:
 - No changes

Changes in v3:
 - Rebased on 1d5eeda23f36 ("can: kvaser_usb: advertise timestamping capabilities and add ioctl support")
 - Add stable to CC
 - Add S-o-b

Changes in v2:
  - Rebased on b3b6df2c56d8 ("can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits")

 .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c  | 75 +++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
index 07f687f29b34..8e11cda85624 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
@@ -310,6 +310,38 @@ struct kvaser_cmd {
 	} u;
 } __packed;
 
+#define CMD_SIZE_ANY 0xff
+#define kvaser_fsize(field) sizeof_field(struct kvaser_cmd, field)
+
+static const u8 kvaser_usb_leaf_cmd_sizes_leaf[] = {
+	[CMD_START_CHIP_REPLY]		= kvaser_fsize(u.simple),
+	[CMD_STOP_CHIP_REPLY]		= kvaser_fsize(u.simple),
+	[CMD_GET_CARD_INFO_REPLY]	= kvaser_fsize(u.cardinfo),
+	[CMD_TX_ACKNOWLEDGE]		= kvaser_fsize(u.tx_acknowledge_header),
+	[CMD_GET_SOFTWARE_INFO_REPLY]	= kvaser_fsize(u.leaf.softinfo),
+	[CMD_RX_STD_MESSAGE]		= kvaser_fsize(u.leaf.rx_can),
+	[CMD_RX_EXT_MESSAGE]		= kvaser_fsize(u.leaf.rx_can),
+	[CMD_LEAF_LOG_MESSAGE]		= kvaser_fsize(u.leaf.log_message),
+	[CMD_CHIP_STATE_EVENT]		= kvaser_fsize(u.leaf.chip_state_event),
+	[CMD_CAN_ERROR_EVENT]		= kvaser_fsize(u.leaf.error_event),
+	/* ignored events: */
+	[CMD_FLUSH_QUEUE_REPLY]		= CMD_SIZE_ANY,
+};
+
+static const u8 kvaser_usb_leaf_cmd_sizes_usbcan[] = {
+	[CMD_START_CHIP_REPLY]		= kvaser_fsize(u.simple),
+	[CMD_STOP_CHIP_REPLY]		= kvaser_fsize(u.simple),
+	[CMD_GET_CARD_INFO_REPLY]	= kvaser_fsize(u.cardinfo),
+	[CMD_TX_ACKNOWLEDGE]		= kvaser_fsize(u.tx_acknowledge_header),
+	[CMD_GET_SOFTWARE_INFO_REPLY]	= kvaser_fsize(u.usbcan.softinfo),
+	[CMD_RX_STD_MESSAGE]		= kvaser_fsize(u.usbcan.rx_can),
+	[CMD_RX_EXT_MESSAGE]		= kvaser_fsize(u.usbcan.rx_can),
+	[CMD_CHIP_STATE_EVENT]		= kvaser_fsize(u.usbcan.chip_state_event),
+	[CMD_CAN_ERROR_EVENT]		= kvaser_fsize(u.usbcan.error_event),
+	/* ignored events: */
+	[CMD_USBCAN_CLOCK_OVERFLOW_EVENT] = CMD_SIZE_ANY,
+};
+
 /* Summary of a kvaser error event, for a unified Leaf/Usbcan error
  * handling. Some discrepancies between the two families exist:
  *
@@ -397,6 +429,43 @@ static const struct kvaser_usb_dev_cfg kvaser_usb_leaf_imx_dev_cfg_32mhz = {
 	.bittiming_const = &kvaser_usb_flexc_bittiming_const,
 };
 
+static int kvaser_usb_leaf_verify_size(const struct kvaser_usb *dev,
+				       const struct kvaser_cmd *cmd)
+{
+	/* buffer size >= cmd->len ensured by caller */
+	u8 min_size = 0;
+
+	switch (dev->driver_info->family) {
+	case KVASER_LEAF:
+		if (cmd->id < ARRAY_SIZE(kvaser_usb_leaf_cmd_sizes_leaf))
+			min_size = kvaser_usb_leaf_cmd_sizes_leaf[cmd->id];
+		break;
+	case KVASER_USBCAN:
+		if (cmd->id < ARRAY_SIZE(kvaser_usb_leaf_cmd_sizes_usbcan))
+			min_size = kvaser_usb_leaf_cmd_sizes_usbcan[cmd->id];
+		break;
+	}
+
+	if (min_size == CMD_SIZE_ANY)
+		return 0;
+
+	if (min_size) {
+		min_size += CMD_HEADER_LEN;
+		if (cmd->len >= min_size)
+			return 0;
+
+		dev_err_ratelimited(&dev->intf->dev,
+				    "Received command %u too short (size %u, needed %u)",
+				    cmd->id, cmd->len, min_size);
+		return -EIO;
+	}
+
+	dev_warn_ratelimited(&dev->intf->dev,
+			     "Unhandled command (%d, size %d)\n",
+			     cmd->id, cmd->len);
+	return -EINVAL;
+}
+
 static void *
 kvaser_usb_leaf_frame_to_cmd(const struct kvaser_usb_net_priv *priv,
 			     const struct sk_buff *skb, int *cmd_len,
@@ -502,6 +571,9 @@ static int kvaser_usb_leaf_wait_cmd(const struct kvaser_usb *dev, u8 id,
 end:
 	kfree(buf);
 
+	if (err == 0)
+		err = kvaser_usb_leaf_verify_size(dev, cmd);
+
 	return err;
 }
 
@@ -1133,6 +1205,9 @@ static void kvaser_usb_leaf_stop_chip_reply(const struct kvaser_usb *dev,
 static void kvaser_usb_leaf_handle_command(const struct kvaser_usb *dev,
 					   const struct kvaser_cmd *cmd)
 {
+	if (kvaser_usb_leaf_verify_size(dev, cmd) < 0)
+		return;
+
 	switch (cmd->id) {
 	case CMD_START_CHIP_REPLY:
 		kvaser_usb_leaf_start_chip_reply(dev, cmd);
-- 
2.38.0


  reply	other threads:[~2022-10-10 15:09 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-10 15:08 [PATCH v5 0/4] can: kvaser_usb: Various fixes Jimmy Assarsson
2022-10-10 15:08 ` Jimmy Assarsson [this message]
2022-10-10 15:08 ` [PATCH v5 2/4] can: kvaser_usb: Fix use of uninitialized completion Jimmy Assarsson
2022-10-10 15:08 ` [PATCH v5 3/4] can: kvaser_usb_leaf: Fix TX queue out of sync after restart Jimmy Assarsson
2022-10-10 15:08 ` [PATCH v5 4/4] can: kvaser_usb_leaf: Fix CAN state " Jimmy Assarsson
2022-10-11  6:57 ` [PATCH v5 0/4] can: kvaser_usb: Various fixes Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221010150829.199676-2-extja@kvaser.com \
    --to=extja@kvaser.com \
    --cc=anssi.hannula@bitwise.fi \
    --cc=jimmyassarsson@gmail.com \
    --cc=linux-can@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.