Re: [PATCH v3 06/14] iio: ad7192: Simplify using devm_regulator_get_enable()

[Jonathan Cameron <jic23@kernel.org>]

On Fri, 19 Aug 2022 22:19:01 +0300
Matti Vaittinen <mazziesaccount@gmail.com> wrote:

> Use devm_regulator_get_enable() instead of open coded get, enable,
> add-action-to-disable-at-detach - pattern. Also drop the seemingly unused
> struct member 'dvdd'.
> 
> Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Now the required dependencies are upstream...

Applied to the togreg branch of iio.git.

Thanks,

Jonathan

> 
> ---
> v2 => v3
> Split to own patch.
> ---
>  drivers/iio/adc/ad7192.c | 15 ++-------------
>  1 file changed, 2 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
> index d71977be7d22..8a52c0dec3f9 100644
> --- a/drivers/iio/adc/ad7192.c
> +++ b/drivers/iio/adc/ad7192.c
> @@ -177,7 +177,6 @@ struct ad7192_chip_info {
>  struct ad7192_state {
>  	const struct ad7192_chip_info	*chip_info;
>  	struct regulator		*avdd;
> -	struct regulator		*dvdd;
>  	struct clk			*mclk;
>  	u16				int_vref_mv;
>  	u32				fclk;
> @@ -1015,19 +1014,9 @@ static int ad7192_probe(struct spi_device *spi)
>  	if (ret)
>  		return ret;
>  
> -	st->dvdd = devm_regulator_get(&spi->dev, "dvdd");
> -	if (IS_ERR(st->dvdd))
> -		return PTR_ERR(st->dvdd);
> -
> -	ret = regulator_enable(st->dvdd);
> -	if (ret) {
> -		dev_err(&spi->dev, "Failed to enable specified DVdd supply\n");
> -		return ret;
> -	}
> -
> -	ret = devm_add_action_or_reset(&spi->dev, ad7192_reg_disable, st->dvdd);
> +	ret = devm_regulator_get_enable(&spi->dev, "dvdd");
>  	if (ret)
> -		return ret;
> +		return dev_err_probe(&spi->dev, ret, "Failed to enable specified DVdd supply\n");
>  
>  	ret = regulator_get_voltage(st->avdd);
>  	if (ret < 0) {