All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: Jens Axboe <axboe@kernel.dk>, Keith Busch <kbusch@kernel.org>,
	Sagi Grimberg <sagi@grimberg.me>, Chao Leng <lengchao@huawei.com>
Cc: Ming Lei <ming.lei@redhat.com>,
	linux-nvme@lists.infradead.org, linux-block@vger.kernel.org
Subject: [PATCH 8/8] nvme: use blk_mq_[un]quiesce_tagset
Date: Thu, 20 Oct 2022 12:56:08 +0200	[thread overview]
Message-ID: <20221020105608.1581940-9-hch@lst.de> (raw)
In-Reply-To: <20221020105608.1581940-1-hch@lst.de>

From: Chao Leng <lengchao@huawei.com>

All controller namespaces share the same tagset, so we can use this
interface which does the optimal operation for parallel quiesce based on
the tagset type(e.g. blocking tagsets and non-blocking tagsets).

nvme connect_q should not be quiesced when quiesce tagset, so set the
QUEUE_FLAG_SKIP_TAGSET_QUIESCE to skip it when init connect_q.

Currently we use NVME_NS_STOPPED to ensure pairing quiescing and
unquiescing. If use blk_mq_[un]quiesce_tagset, NVME_NS_STOPPED will be
invalided, so introduce NVME_CTRL_STOPPED to replace NVME_NS_STOPPED.
In addition, we never really quiesce a single namespace. It is a better
choice to move the flag from ns to ctrl.

Signed-off-by: Chao Leng <lengchao@huawei.com>
[hch: rebased on top of prep patches]
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/nvme/host/core.c | 38 +++++++++-----------------------------
 drivers/nvme/host/nvme.h |  2 +-
 2 files changed, 10 insertions(+), 30 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 0ab3a18fd9f85..cc71f1001144f 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -4891,6 +4891,7 @@ int nvme_alloc_io_tag_set(struct nvme_ctrl *ctrl, struct blk_mq_tag_set *set,
 			ret = PTR_ERR(ctrl->connect_q);
 			goto out_free_tag_set;
 		}
+		blk_queue_flag_set(QUEUE_FLAG_SKIP_TAGSET_QUIESCE, ctrl->connect_q);
 	}
 
 	ctrl->tagset = set;
@@ -5090,20 +5091,6 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct device *dev,
 }
 EXPORT_SYMBOL_GPL(nvme_init_ctrl);
 
-static void nvme_start_ns_queue(struct nvme_ns *ns)
-{
-	if (test_and_clear_bit(NVME_NS_STOPPED, &ns->flags))
-		blk_mq_unquiesce_queue(ns->queue);
-}
-
-static void nvme_stop_ns_queue(struct nvme_ns *ns)
-{
-	if (!test_and_set_bit(NVME_NS_STOPPED, &ns->flags))
-		blk_mq_quiesce_queue(ns->queue);
-	else
-		blk_mq_wait_quiesce_done(ns->queue->tag_set);
-}
-
 /**
  * nvme_kill_queues(): Ends all namespace queues
  * @ctrl: the dead controller that needs to end
@@ -5120,10 +5107,9 @@ void nvme_kill_queues(struct nvme_ctrl *ctrl)
 	if (ctrl->admin_q && !blk_queue_dying(ctrl->admin_q))
 		nvme_start_admin_queue(ctrl);
 	if (!test_and_set_bit(NVME_CTRL_NS_DEAD, &ctrl->flags)) {
-		list_for_each_entry(ns, &ctrl->namespaces, list) {
+		list_for_each_entry(ns, &ctrl->namespaces, list)
 			blk_mark_disk_dead(ns->disk);
-			nvme_start_ns_queue(ns);
-		}
+		nvme_start_queues(ctrl);
 	}
 	up_read(&ctrl->namespaces_rwsem);
 }
@@ -5179,23 +5165,17 @@ EXPORT_SYMBOL_GPL(nvme_start_freeze);
 
 void nvme_stop_queues(struct nvme_ctrl *ctrl)
 {
-	struct nvme_ns *ns;
-
-	down_read(&ctrl->namespaces_rwsem);
-	list_for_each_entry(ns, &ctrl->namespaces, list)
-		nvme_stop_ns_queue(ns);
-	up_read(&ctrl->namespaces_rwsem);
+	if (!test_and_set_bit(NVME_CTRL_STOPPED, &ctrl->flags))
+		blk_mq_quiesce_tagset(ctrl->tagset);
+	else
+		blk_mq_wait_quiesce_done(ctrl->tagset);
 }
 EXPORT_SYMBOL_GPL(nvme_stop_queues);
 
 void nvme_start_queues(struct nvme_ctrl *ctrl)
 {
-	struct nvme_ns *ns;
-
-	down_read(&ctrl->namespaces_rwsem);
-	list_for_each_entry(ns, &ctrl->namespaces, list)
-		nvme_start_ns_queue(ns);
-	up_read(&ctrl->namespaces_rwsem);
+	if (test_and_clear_bit(NVME_CTRL_STOPPED, &ctrl->flags))
+		blk_mq_unquiesce_tagset(ctrl->tagset);
 }
 EXPORT_SYMBOL_GPL(nvme_start_queues);
 
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 82989a3322130..54d8127fb6dc5 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -238,6 +238,7 @@ enum nvme_ctrl_flags {
 	NVME_CTRL_ADMIN_Q_STOPPED	= 1,
 	NVME_CTRL_STARTED_ONCE		= 2,
 	NVME_CTRL_NS_DEAD     		= 3,
+	NVME_CTRL_STOPPED		= 4,
 };
 
 struct nvme_ctrl {
@@ -487,7 +488,6 @@ struct nvme_ns {
 #define NVME_NS_ANA_PENDING	2
 #define NVME_NS_FORCE_RO	3
 #define NVME_NS_READY		4
-#define NVME_NS_STOPPED		5
 
 	struct cdev		cdev;
 	struct device		cdev_device;
-- 
2.30.2


  parent reply	other threads:[~2022-10-20 10:57 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-20 10:56 per-tagset SRCU struct and quiesce Christoph Hellwig
2022-10-20 10:56 ` [PATCH 1/8] block: set the disk capacity to 0 in blk_mark_disk_dead Christoph Hellwig
2022-10-20 13:16   ` Sagi Grimberg
2022-10-21  1:09   ` Ming Lei
2022-10-21 13:11     ` Christoph Hellwig
2022-10-21  1:53   ` Chao Leng
2022-10-21  6:49   ` Hannes Reinecke
2022-10-21 13:13     ` Christoph Hellwig
2022-10-21 21:12   ` Bart Van Assche
2022-10-20 10:56 ` [PATCH 2/8] blk-mq: skip non-mq queues in blk_mq_quiesce_queue Christoph Hellwig
2022-10-20 13:16   ` Sagi Grimberg
2022-10-21  1:13   ` Ming Lei
2022-10-21 13:19     ` Christoph Hellwig
2022-10-21 15:08       ` Ming Lei
2022-10-21  2:47   ` Chao Leng
2022-10-21  3:16     ` Chao Leng
2022-10-21  6:49   ` Hannes Reinecke
2022-10-20 10:56 ` [PATCH 3/8] blk-mq: move the srcu_struct used for quiescing to the tagset Christoph Hellwig
2022-10-20 13:23   ` Sagi Grimberg
2022-10-20 17:26   ` Keith Busch
2022-10-21 13:20     ` Christoph Hellwig
2022-10-21  1:41   ` Ming Lei
2022-10-21  2:49   ` Chao Leng
2022-10-21  6:50   ` Hannes Reinecke
2022-10-21  7:16   ` Chao Leng
2022-10-21 13:22     ` Christoph Hellwig
2022-10-20 10:56 ` [PATCH 4/8] blk-mq: pass a tagset to blk_mq_wait_quiesce_done Christoph Hellwig
2022-10-20 13:23   ` Sagi Grimberg
2022-10-21  1:46   ` Ming Lei
2022-10-21 13:23     ` Christoph Hellwig
2022-10-21  2:49   ` Chao Leng
2022-10-21  6:50   ` Hannes Reinecke
2022-10-21 21:18   ` Bart Van Assche
2022-10-20 10:56 ` [PATCH 5/8] blk-mq: add tagset quiesce interface Christoph Hellwig
2022-10-20 13:24   ` Sagi Grimberg
2022-10-21  1:53   ` Ming Lei
2022-10-21  2:49   ` Chao Leng
2022-10-21  6:51   ` Hannes Reinecke
2022-10-21 21:22   ` Bart Van Assche
2022-10-24  1:57     ` Chao Leng
2022-10-24 13:35       ` Bart Van Assche
2022-10-25  1:38         ` Chao Leng
2022-10-20 10:56 ` [PATCH 6/8] nvme: move the NS_DEAD flag to the controller Christoph Hellwig
2022-10-20 13:30   ` Sagi Grimberg
2022-10-21 13:28     ` Christoph Hellwig
2022-10-24  8:43       ` Sagi Grimberg
2022-10-24  8:50         ` Sagi Grimberg
2022-10-21  2:49   ` Chao Leng
2022-10-21  6:51   ` Hannes Reinecke
2022-10-20 10:56 ` [PATCH 7/8] nvme: remove nvme_set_queue_dying Christoph Hellwig
2022-10-20 13:10   ` Sagi Grimberg
2022-10-21 13:29     ` Christoph Hellwig
2022-10-24  8:48       ` Sagi Grimberg
2022-10-21  2:50   ` Chao Leng
2022-10-21  6:52   ` Hannes Reinecke
2022-10-20 10:56 ` Christoph Hellwig [this message]
2022-10-20 13:35   ` [PATCH 8/8] nvme: use blk_mq_[un]quiesce_tagset Sagi Grimberg
2022-10-21  2:50   ` Chao Leng
2022-10-21  6:52   ` Hannes Reinecke
2022-10-20 13:16 ` per-tagset SRCU struct and quiesce Sagi Grimberg
2022-10-21 18:06 ` Keith Busch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221020105608.1581940-9-hch@lst.de \
    --to=hch@lst.de \
    --cc=axboe@kernel.dk \
    --cc=kbusch@kernel.org \
    --cc=lengchao@huawei.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=ming.lei@redhat.com \
    --cc=sagi@grimberg.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.