All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bin Meng <bmeng@tinylab.org>
To: u-boot@lists.denx.de
Cc: "Ashok Reddy Soma" <ashok.reddy.soma@xilinx.com>,
	"Derald D. Woods" <woods.technical@gmail.com>,
	"Joe Hershberger" <joe.hershberger@ni.com>,
	"Marek Behún" <kabel@kernel.org>,
	"Michal Simek" <michal.simek@amd.com>,
	"Pali Rohár" <pali@kernel.org>,
	"Priyanka Jain" <priyanka.jain@nxp.com>,
	"Priyanka Singh" <priyanka.singh@nxp.com>,
	"Ramon Fried" <rfried.dev@gmail.com>,
	"Simon Glass" <sjg@chromium.org>, "Stefan Roese" <sr@denx.de>,
	"Vladimir Oltean" <vladimir.oltean@nxp.com>,
	"Wolfgang Denk" <wd@denx.de>
Subject: [PATCH] treewide: Remove the unnecessary space before semicolon
Date: Wed, 26 Oct 2022 12:40:07 +0800	[thread overview]
Message-ID: <20221026044007.2473420-1-bmeng@tinylab.org> (raw)

%s/return ;/return;

Signed-off-by: Bin Meng <bmeng@tinylab.org>
---

 arch/powerpc/cpu/mpc85xx/cpu_init.c       | 2 +-
 arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 2 +-
 arch/powerpc/cpu/mpc85xx/fdt.c            | 6 +++---
 arch/powerpc/cpu/mpc85xx/liodn.c          | 4 ++--
 arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c | 2 +-
 arch/powerpc/cpu/mpc85xx/portals.c        | 8 ++++----
 arch/powerpc/cpu/mpc85xx/tlb.c            | 2 +-
 arch/powerpc/cpu/mpc8xxx/fdt.c            | 2 +-
 arch/powerpc/cpu/mpc8xxx/law.c            | 2 +-
 arch/powerpc/lib/bootm.c                  | 4 ++--
 board/ti/evm/evm.c                        | 2 +-
 drivers/ddr/fsl/util.c                    | 2 +-
 drivers/net/fm/init.c                     | 4 ++--
 13 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 92a7e608ce..90f024d0a7 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -446,7 +446,7 @@ ulong cpu_init_f(void)
 /* Implement a dummy function for those platforms w/o SERDES */
 static void __fsl_serdes__init(void)
 {
-	return ;
+	return;
 }
 __attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
 
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index 1bba216371..e6347cfd2d 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -76,7 +76,7 @@ void setup_ifc(void)
 	ifc_out32(&(ifc_regs.gregs->csor_cs[0].csor), CONFIG_SYS_CSOR0);
 	ifc_out32(&(ifc_regs.gregs->amask_cs[0].amask), CONFIG_SYS_AMASK0);
 
-	return ;
+	return;
 }
 #endif
 
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index c8ad6a1b01..61d8aa7f4c 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -271,13 +271,13 @@ static inline void ft_fixup_l2cache(void *blob)
 
 	if (ph == NULL) {
 		debug("no next-level-cache property\n");
-		return ;
+		return;
 	}
 
 	off = fdt_node_offset_by_phandle(blob, *ph);
 	if (off < 0) {
 		printf("%s: %s\n", __func__, fdt_strerror(off));
-		return ;
+		return;
 	}
 
 	ft_fixup_l2cache_compatible(blob, off);
@@ -373,7 +373,7 @@ next:
 		l3_off = fdt_node_offset_by_phandle(blob, l3_off);
 		if (l3_off < 0) {
 			printf("%s: %s\n", __func__, fdt_strerror(off));
-			return ;
+			return;
 		}
 		ft_fixup_l3cache(blob, l3_off);
 	}
diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c
index a084002494..34974c92bd 100644
--- a/arch/powerpc/cpu/mpc85xx/liodn.c
+++ b/arch/powerpc/cpu/mpc85xx/liodn.c
@@ -111,7 +111,7 @@ static void setup_fman_liodn_base(enum fsl_dpaa_dev dev,
 #endif
 	default:
 		printf("Error: Invalid device type to %s\n", __FUNCTION__);
-		return ;
+		return;
 	}
 
 	base = (liodn_bases[dev].id[0] << 16) | liodn_bases[dev].id[0];
@@ -232,7 +232,7 @@ static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl)
 	/* search for srio node, if doesn't exist just return - nothing todo */
 	srio_off = fdt_node_offset_by_compatible(blob, -1, "fsl,srio");
 	if (srio_off < 0)
-		return ;
+		return;
 
 	for (i = 0; i < srio_liodn_tbl_sz; i++) {
 		int off, portid = tbl[i].portid;
diff --git a/arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c
index 2a5c3e3200..38f30afdfc 100644
--- a/arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c
@@ -45,7 +45,7 @@ void fsl_serdes_init(void)
 
 	if (srds1_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
 		printf("Invalid PORDEVSR[IO_SEL] = %d\n", srds1_cfg);
-		return ;
+		return;
 	}
 
 	for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c
index 52e2124fb9..6b4cbddcdf 100644
--- a/arch/powerpc/cpu/mpc85xx/portals.c
+++ b/arch/powerpc/cpu/mpc85xx/portals.c
@@ -21,7 +21,7 @@ void fdt_portal(void *blob, const char *compat, const char *container,
 
 	off = fdt_node_offset_by_compatible(blob, -1, compat);
 	if (off < 0)
-		return ;
+		return;
 
 	off = fdt_parent_offset(blob, off);
 	/* if non-zero assume we have a container */
@@ -35,7 +35,7 @@ void fdt_portal(void *blob, const char *compat, const char *container,
 		range = fdt_getprop_w(blob, off, "ranges", &len);
 		if (range == NULL) {
 			printf("ERROR: container for %s has no ranges", compat);
-			return ;
+			return;
 		}
 
 		range[0] = 0;
@@ -61,13 +61,13 @@ void fdt_portal(void *blob, const char *compat, const char *container,
 		if (container && (memcmp(container, name, len))) {
 			printf("WARNING: container names didn't match %s %s\n",
 				container, name);
-			return ;
+			return;
 		}
 
 		memcpy(&buf, name, len);
 		len += sprintf(&buf[len], "@%llx", addr);
 		fdt_set_name(blob, off, buf);
-		return ;
+		return;
 	}
 
 	printf("ERROR: %s isn't in a container.  Not supported\n", compat);
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index e39fe14382..81e60722f9 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -41,7 +41,7 @@ __weak void init_tlbs(void)
 			  tlb_table[i].mas7);
 	}
 
-	return ;
+	return;
 }
 
 #if !defined(CONFIG_NAND_SPL) && \
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 871554a7f4..3004290248 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -128,7 +128,7 @@ void ft_srio_setup(void *blob)
 	/* search for srio node, if doesn't exist just return - nothing todo */
 	srio_off = fdt_node_offset_by_compatible(blob, -1, "fsl,srio");
 	if (srio_off < 0)
-		return ;
+		return;
 
 #ifdef CONFIG_SRIO1
 	if (is_serdes_configured(SRIO1))
diff --git a/arch/powerpc/cpu/mpc8xxx/law.c b/arch/powerpc/cpu/mpc8xxx/law.c
index 198b5b10a5..24bbe3b45f 100644
--- a/arch/powerpc/cpu/mpc8xxx/law.c
+++ b/arch/powerpc/cpu/mpc8xxx/law.c
@@ -353,5 +353,5 @@ void init_laws(void)
 	}
 #endif
 
-	return ;
+	return;
 }
diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c
index 512787854c..8ae8d8a3e7 100644
--- a/arch/powerpc/lib/bootm.c
+++ b/arch/powerpc/lib/bootm.c
@@ -113,7 +113,7 @@ static void boot_jump_linux(struct bootm_headers *images)
 			   cmd_start, cmd_end, 0, 0);
 		/* does not return */
 	}
-	return ;
+	return;
 }
 
 void arch_lmb_reserve(struct lmb *lmb)
@@ -148,7 +148,7 @@ void arch_lmb_reserve(struct lmb *lmb)
 	cpu_mp_lmb_reserve(lmb);
 #endif
 
-	return ;
+	return;
 }
 
 static void boot_prep_linux(struct bootm_headers *images)
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index 39b5c706a9..a7f9a7eca1 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -234,7 +234,7 @@ static void reset_net_chip(void)
 	ret = gpio_request(rst_gpio, "");
 	if (ret < 0) {
 		printf("Unable to get GPIO %d\n", rst_gpio);
-		return ;
+		return;
 	}
 
 	/* Configure as output */
diff --git a/drivers/ddr/fsl/util.c b/drivers/ddr/fsl/util.c
index 43cb01804b..589d7df731 100644
--- a/drivers/ddr/fsl/util.c
+++ b/drivers/ddr/fsl/util.c
@@ -147,7 +147,7 @@ __fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
 	if (set_ddr_laws(base, size, law_memctl) < 0) {
 		printf("%s: ERROR (ctrl #%d, TRGT ID=%x)\n", __func__, ctrl_num,
 			law_memctl);
-		return ;
+		return;
 	}
 	debug("setup ddr law base = 0x%llx, size 0x%llx, TRGT_ID 0x%x\n",
 		base, size, law_memctl);
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
index af94dabe29..43d2000d24 100644
--- a/drivers/net/fm/init.c
+++ b/drivers/net/fm/init.c
@@ -149,7 +149,7 @@ void fman_enet_init(void)
 		}
 	}
 
-	return ;
+	return;
 }
 
 void fm_disable_port(enum fm_port port)
@@ -233,7 +233,7 @@ static void
 __def_board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
 				enum fm_port port, int offset)
 {
-	return ;
+	return;
 }
 
 void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
-- 
2.34.1


             reply	other threads:[~2022-10-26 11:22 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-26  4:40 Bin Meng [this message]
2022-10-26  4:54 ` [PATCH] treewide: Remove the unnecessary space before semicolon Stefan Roese
2022-11-03 16:58 ` Tom Rini
  -- strict thread matches above, loose matches on Subject: below --
2022-10-24  7:28 Bin Meng
2022-10-24  8:17 ` Pavel Pisa
2022-10-24  8:31 ` Michael S. Tsirkin
2022-10-24 10:17 ` Peter Maydell
2022-10-24 11:25 ` Christian Schoenebeck
2022-10-24 11:42 ` Laurent Vivier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221026044007.2473420-1-bmeng@tinylab.org \
    --to=bmeng@tinylab.org \
    --cc=ashok.reddy.soma@xilinx.com \
    --cc=joe.hershberger@ni.com \
    --cc=kabel@kernel.org \
    --cc=michal.simek@amd.com \
    --cc=pali@kernel.org \
    --cc=priyanka.jain@nxp.com \
    --cc=priyanka.singh@nxp.com \
    --cc=rfried.dev@gmail.com \
    --cc=sjg@chromium.org \
    --cc=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    --cc=vladimir.oltean@nxp.com \
    --cc=wd@denx.de \
    --cc=woods.technical@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.