All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anusha Srivatsa <anusha.srivatsa@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Subject: [Intel-gfx] [PATCH 1/2] drm/i915/display: Do both crawl and squash when changing cdclk
Date: Mon, 31 Oct 2022 15:56:47 -0700	[thread overview]
Message-ID: <20221031225648.552363-1-anusha.srivatsa@intel.com> (raw)

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

For MTL, changing cdclk from between certain frequencies has
both squash and crawl. Use the current cdclk config and
the new(desired) cdclk config to construtc a mid cdclk config.
Set the cdclk twice:
- Current cdclk -> mid cdclk
- mid cdclk -> desired cdclk

v2: Add check in intel_modeset_calc_cdclk() to avoid cdclk
change via modeset for platforms that support squash_crawl sequences(Ville)

v3: Add checks for:
- scenario where only slow clock is used and
cdclk is actually 0 (bringing up display).
- PLLs are on before looking up the waveform.
- Squash and crawl capability checks.(Ville)

v4: Rebase
- Move checks to be more consistent (Ville)
- Add comments (Bala)
v5:
- Further small changes. Move checks around.
- Make if-else better looking (Ville)

Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_cdclk.c | 156 +++++++++++++++++----
 1 file changed, 128 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
index eada931cb1c8..d79cf282faa8 100644
--- a/drivers/gpu/drm/i915/display/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
@@ -1716,37 +1716,74 @@ static void dg2_cdclk_squash_program(struct drm_i915_private *i915,
 	intel_de_write(i915, CDCLK_SQUASH_CTL, squash_ctl);
 }
 
-static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_config *cdclk_config,
-			  enum pipe pipe)
+static int cdclk_squash_divider(u16 waveform)
+{
+	return hweight16(waveform ?: 0xffff);
+}
+
+static bool cdclk_crawl_and_squash(struct drm_i915_private *i915,
+				   const struct intel_cdclk_config *old_cdclk_config,
+				   const struct intel_cdclk_config *new_cdclk_config,
+				   struct intel_cdclk_config *mid_cdclk_config)
+{
+	u16 old_waveform, new_waveform, mid_waveform;
+	int size = 16;
+	int div = 2;
+
+	/* Return if both Squash and Crawl are not present */
+	if (!HAS_CDCLK_CRAWL(i915) || !HAS_CDCLK_SQUASH(i915))
+		return false;
+
+	old_waveform = cdclk_squash_waveform(i915, old_cdclk_config->cdclk);
+	new_waveform = cdclk_squash_waveform(i915, new_cdclk_config->cdclk);
+
+	/* Return if Squash only or Crawl only is the desired action */
+	if (old_cdclk_config->vco <= 0 || new_cdclk_config->vco <= 0 ||
+	    old_cdclk_config->vco == new_cdclk_config->vco ||
+	    old_waveform == new_waveform)
+		return false;
+
+	*mid_cdclk_config = *new_cdclk_config;
+
+	/* Populate the mid_cdclk_config accordingly.
+	 * - If moving to a higher cdclk, the desired action is squashing.
+	 * The mid cdclk config should have the new (squash) waveform.
+	 * - If moving to a lower cdclk, the desired action is crawling.
+	 * The mid cdclk config should have the new vco.
+	 */
+
+	if (cdclk_squash_divider(new_waveform) > cdclk_squash_divider(old_waveform)) {
+		mid_cdclk_config->vco = old_cdclk_config->vco;
+		mid_waveform = new_waveform;
+	} else {
+		mid_cdclk_config->vco = new_cdclk_config->vco;
+		mid_waveform = old_waveform;
+	}
+
+	mid_cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_squash_divider(mid_waveform) *
+						    mid_cdclk_config->vco, size * div);
+
+	/* make sure the mid clock came out sane */
+
+	drm_WARN_ON(&i915->drm, mid_cdclk_config->cdclk <
+		    min(old_cdclk_config->cdclk, new_cdclk_config->cdclk));
+	drm_WARN_ON(&i915->drm, mid_cdclk_config->cdclk >
+		    i915->display.cdclk.max_cdclk_freq);
+	drm_WARN_ON(&i915->drm, cdclk_squash_waveform(i915, mid_cdclk_config->cdclk) !=
+		    mid_waveform);
+
+	return true;
+}
+
+static void _bxt_set_cdclk(struct drm_i915_private *dev_priv,
+			   const struct intel_cdclk_config *cdclk_config,
+			   enum pipe pipe)
 {
 	int cdclk = cdclk_config->cdclk;
 	int vco = cdclk_config->vco;
 	u32 val;
 	u16 waveform;
 	int clock;
-	int ret;
-
-	/* Inform power controller of upcoming frequency change. */
-	if (DISPLAY_VER(dev_priv) >= 11)
-		ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
-					SKL_CDCLK_PREPARE_FOR_CHANGE,
-					SKL_CDCLK_READY_FOR_CHANGE,
-					SKL_CDCLK_READY_FOR_CHANGE, 3);
-	else
-		/*
-		 * BSpec requires us to wait up to 150usec, but that leads to
-		 * timeouts; the 2ms used here is based on experiment.
-		 */
-		ret = snb_pcode_write_timeout(&dev_priv->uncore,
-					      HSW_PCODE_DE_WRITE_FREQ_REQ,
-					      0x80000000, 150, 2);
-	if (ret) {
-		drm_err(&dev_priv->drm,
-			"Failed to inform PCU about cdclk change (err %d, freq %d)\n",
-			ret, cdclk);
-		return;
-	}
 
 	if (HAS_CDCLK_CRAWL(dev_priv) && dev_priv->display.cdclk.hw.vco > 0 && vco > 0) {
 		if (dev_priv->display.cdclk.hw.vco != vco)
@@ -1781,6 +1818,44 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 
 	if (pipe != INVALID_PIPE)
 		intel_crtc_wait_for_next_vblank(intel_crtc_for_pipe(dev_priv, pipe));
+}
+
+static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
+			  const struct intel_cdclk_config *cdclk_config,
+			  enum pipe pipe)
+{
+	struct intel_cdclk_config mid_cdclk_config;
+	int cdclk = cdclk_config->cdclk;
+	int ret;
+
+	/* Inform power controller of upcoming frequency change. */
+	if (DISPLAY_VER(dev_priv) >= 11)
+		ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
+					SKL_CDCLK_PREPARE_FOR_CHANGE,
+					SKL_CDCLK_READY_FOR_CHANGE,
+					SKL_CDCLK_READY_FOR_CHANGE, 3);
+	else
+		/*
+		 * BSpec requires us to wait up to 150usec, but that leads to
+		 * timeouts; the 2ms used here is based on experiment.
+		 */
+		ret = snb_pcode_write_timeout(&dev_priv->uncore,
+					      HSW_PCODE_DE_WRITE_FREQ_REQ,
+					      0x80000000, 150, 2);
+	if (ret) {
+		drm_err(&dev_priv->drm,
+			"Failed to inform PCU about cdclk change (err %d, freq %d)\n",
+			ret, cdclk);
+		return;
+	}
+
+	if (cdclk_crawl_and_squash(dev_priv, &dev_priv->display.cdclk.hw,
+				   cdclk_config, &mid_cdclk_config)) {
+		_bxt_set_cdclk(dev_priv, &mid_cdclk_config, pipe);
+		_bxt_set_cdclk(dev_priv, cdclk_config, pipe);
+	} else {
+		_bxt_set_cdclk(dev_priv, cdclk_config, pipe);
+	}
 
 	if (DISPLAY_VER(dev_priv) >= 11) {
 		ret = snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
@@ -1953,6 +2028,26 @@ void intel_cdclk_uninit_hw(struct drm_i915_private *i915)
 		skl_cdclk_uninit_hw(i915);
 }
 
+static bool intel_cdclk_can_crawl_and_squash(struct drm_i915_private *i915,
+					     const struct intel_cdclk_config *a,
+					     const struct intel_cdclk_config *b)
+{
+	u16 old_waveform;
+	u16 new_waveform;
+
+	if (a->vco == 0 || b->vco == 0)
+		return false;
+
+	if (!HAS_CDCLK_CRAWL(i915) && !HAS_CDCLK_SQUASH(i915))
+		return false;
+
+	old_waveform = cdclk_squash_waveform(i915, a->cdclk);
+	new_waveform = cdclk_squash_waveform(i915, b->cdclk);
+
+	return a->vco != b->vco &&
+	       old_waveform != new_waveform;
+}
+
 static bool intel_cdclk_can_crawl(struct drm_i915_private *dev_priv,
 				  const struct intel_cdclk_config *a,
 				  const struct intel_cdclk_config *b)
@@ -2759,9 +2854,14 @@ int intel_modeset_calc_cdclk(struct intel_atomic_state *state)
 			pipe = INVALID_PIPE;
 	}
 
-	if (intel_cdclk_can_squash(dev_priv,
-				   &old_cdclk_state->actual,
-				   &new_cdclk_state->actual)) {
+	if (intel_cdclk_can_crawl_and_squash(dev_priv,
+					     &old_cdclk_state->actual,
+					     &new_cdclk_state->actual)) {
+		drm_dbg_kms(&dev_priv->drm,
+			    "Can change cdclk via crawling and squashing\n");
+	} else if (intel_cdclk_can_squash(dev_priv,
+					&old_cdclk_state->actual,
+					&new_cdclk_state->actual)) {
 		drm_dbg_kms(&dev_priv->drm,
 			    "Can change cdclk via squashing\n");
 	} else if (intel_cdclk_can_crawl(dev_priv,
-- 
2.25.1


             reply	other threads:[~2022-10-31 22:56 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-31 22:56 Anusha Srivatsa [this message]
2022-10-31 22:56 ` [Intel-gfx] [PATCH 2/2] drm/i915/display: Add CDCLK Support for MTL Anusha Srivatsa
2022-11-01  0:33 ` [Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915/display: Do both crawl and squash when changing cdclk Patchwork
2022-11-01  2:29 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2022-11-01 23:25 ` [Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915/display: Do both crawl and squash when changing cdclk (rev2) Patchwork
2022-11-02  7:59 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2022-11-04 22:26 [Intel-gfx] [PATCH 1/2] drm/i915/display: Do both crawl and squash when changing cdclk Anusha Srivatsa
2022-11-08 23:42 ` Matt Roper
2022-11-08 23:56   ` Srivatsa, Anusha
2022-11-09  0:24     ` Matt Roper
2022-11-09 11:29       ` Ville Syrjälä
2022-11-09 21:49         ` Srivatsa, Anusha
2022-10-28 21:32 Anusha Srivatsa
2022-10-26 23:22 Anusha Srivatsa
2022-10-27  2:35 ` kernel test robot
2022-10-28  9:05 ` Ville Syrjälä
2022-10-28 21:27   ` Srivatsa, Anusha
2022-10-13 23:32 Anusha Srivatsa
2022-10-20 11:32 ` Ville Syrjälä
2022-10-20 19:37   ` Srivatsa, Anusha
2022-10-20 14:42 ` Balasubramani Vivekanandan
2022-10-20 15:14   ` Ville Syrjälä
2022-10-20 19:43     ` Srivatsa, Anusha
2022-10-20 19:40   ` Srivatsa, Anusha
2022-09-30 21:34 Anusha Srivatsa
2022-09-28 19:04 Anusha Srivatsa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221031225648.552363-1-anusha.srivatsa@intel.com \
    --to=anusha.srivatsa@intel.com \
    --cc=balasubramani.vivekanandan@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.