All of lore.kernel.org
 help / color / mirror / Atom feed
From: "YoungJun.Park" <her0gyugyu@gmail.com>
To: Amir Goldstein <amir73il@gmail.com>
Cc: linux-unionfs@vger.kernel.org
Subject: Re: Re: Question about ESTALE error whene deleting upper directory file.
Date: Tue, 8 Nov 2022 04:37:34 -0800	[thread overview]
Message-ID: <20221108123734.GA19150@ubuntu> (raw)
In-Reply-To: <CAOQ4uxi2aGUOCrPb55Q9LGVbqz4M9ZKOhNLnm8kKnsDQgdxYHQ@mail.gmail.com>

On Tue, Nov 08, 2022 at 11:22:14AM +0200, Amir Goldstein wrote:
> On Tue, Nov 8, 2022, 10:14 AM YoungJun.Park <her0gyugyu@gmail.com> wrote:
> 
> > On Mon, Nov 07, 2022 at 10:49:57AM +0200, Amir Goldstein wrote:
> > > On Mon, Nov 7, 2022 at 9:06 AM YoungJun.Park <her0gyugyu@gmail.com>
> > wrote:
> > > >
> > > > On Mon, Nov 07, 2022 at 08:40:02AM +0200, Amir Goldstein wrote:
> > > > > On Mon, Nov 7, 2022 at 6:38 AM YoungJun.Park <her0gyugyu@gmail.com>
> > wrote:
> > > > > >
> > > > > > Here is my curious scenario.
> > > > > >
> > > > > > 1. create a file on overlayfs.
> > > > > > 2. delete a file on upper directory.
> > > > > > 3. can see file contents using read sys call. (may file operations
> > all success)
> > > > > > 4. cannot remove, rename. it return -ESTALE error (may inode
> > operations fail)
> > > > > >
> > > > > > I understand this scenario onto the code level.
> > > > > > But I don't understand this situation itself.
> > > > > >
> > > > > > I found a overlay kernel docs and it comments
> > > > > > Changes to underlying filesystems section
> > > > > >
> > > > > > ...
> > > > > > Changes to the underlying filesystems while part of a mounted
> > overlay filesystem are not allowed.
> > > > > > If the underlying filesystem is changed, the behavior of the
> > overlay is undefined,
> > > > > > though it will not result in a crash or deadlock.
> > > > > > ....
> > > > > >
> > > > > > So here is my question (may it is suggestion)
> > > > > >
> > > > > > 1. underlying file system change is not allowed, then how about
> > implementing shadow upper directory from user?
> > > > > > 2. if read, write system call is allowed, how about changing
> > remove, rename(and more I does not percept) operation success?
> > > > > >
> > > > >
> > > > > What is your use case?
> > > > > Why do you think this is worth spending time on?
> > > > > If anything, we could implement revalidate to return ESTALE also
> > from open
> > > > > in such a case.
> > > > > But again, why do you think that would matter?
> > > > >
> > > > > Thanks,
> > > > > Amir.
> > > >
> > > > Thank you for replying.
> > > > I develop antivirus scanner.
> > > > When developing, I am confronted the situaion below.
> > > >
> > > > 1. make a docker container using overlayfs
> > > > 2. our antivirus scanner detect on upperdir and remove it.
> > > > 3. When I check container, the file contents can be read, buf file
> > cannot be removed.(-ESTALE error)
> > > >
> > > > And as I think, the reason is upperdir is touchable. So it is better
> > to hide upperdir.
> > > > If it is hard to implement(or maybe there is a other reson that I don'
> > know)
> > > > it is better to make the situation is clear
> > > > (file operation error, inode operations error or file operation
> > success , inode operation success)
> > > >
> > >
> > > Error on read is not an option because reading from an open and deleted
> > > file is perfectly valid even without overlayfs.
> > >
> > > ESTALE error on open is doable and makes sense and I believe it may
> > > be sufficient for your use case.
> > >
> > > I have an old branch that implements that behavior:
> > > https://github.com/amir73il/linux/commits/ovl-revalidate
> > >
> > > You can try it out and see if that works for you.
> > > If it does, I can post the patches.
> > >
> > > Note that the use case that you described does not need the last patch,
> > > but if the anti-virus would have moved a lower file to quarantine
> > > instead of deleting it, the last patch would also be useful for you.
> > >
> > > Thanks,
> > > Amir.
> >
> > After applying the branch, I tested the scenario.
> > But it does not work. file open is success on overlayfs filesystem.
> >
> > In my scnario, the dentry is not negative and just unhashed on upper.
> >
> 
> Yeh my bad.
> I also noticed that after I sent you the link.
> I think my patch also has a memleak somewhere I seen kmemleak reports
> during testing.
> 
> If we check dentry is unhashed we properly block open on my scenario.
> > I write the patch and tested it working.
> > (Maybe I does not catch your point, if you give a guide then I follow it)
> >
> 
> Please place the unhashed check inside ovl_revalidate_real() same as my
> checks for negative upper and renamed lower dentry.
> 
> The dentry should only be considered stale if the real dentry is unhashed
> but ovl entry is hashed.
> 
> The state of both ovl dentry and real dentry unhashed is possible and valid
> I think, but it should not interfere with your use case where ovl dentry is
> hashed and real upper is unhashed.
> 
> I may be missing something so better if Miklos also takes a look at the
> patch.
> 
> Thanks,
> Amir.
> 
> 
> > Signed-off-by: YoungJun.park <her0gyugyu@gmail.com>
> > ---
> >  fs/overlayfs/file.c | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/fs/overlayfs/file.c b/fs/overlayfs/file.c
> > index 6512d147c223..629dbcc49070 100644
> > --- a/fs/overlayfs/file.c
> > +++ b/fs/overlayfs/file.c
> > @@ -157,6 +157,10 @@ static int ovl_open(struct inode *inode, struct file
> > *file)
> >     file->f_flags &= ~(O_CREAT | O_EXCL | O_NOCTTY | O_TRUNC);
> >
> >     ovl_path_realdata(dentry, &realpath);
> > +
> > +    if (d_unhashed(realpath.dentry))
> > +        return -ESTALE;
> > +
> >     realfile = ovl_open_realfile(file, &realpath);
> >     if (IS_ERR(realfile))
> >         return PTR_ERR(realfile);
> > --
> > 2.25.1
> >
> > And I have one more question.
> > Why upper dir must be visible..?
> > The reson I think making upper dir unvisible is like the below.
> > 1. If making a upperdir is unvisible, then these kind of problem disappear.
> > 2. upperdir visibility makes a passage to convey container's file to
> > hostland.
> > (in view of container using overlayfs)
> > making unvisible remove this kind of problem.
> > 3. Changing upper dir scenario makes undefined behavior. So, if removing
> > the interface
> > user can access, then we can make the undefined scenario itself.
> >
> > Thanks Amir.
> > Best regards
> >

Thank you for kind guidance Amir.
Before I will do next step, I want to recheck your point Amir :)

1.
> Please place the unhashed check inside ovl_revalidate_real() same as my
> checks for negative upper and renamed lower dentry.

You mean I modify your commit? It is from your branch then 
How I fix it...? (Am I misunderstood somthing?)
here is pseudo patch.

invalidate dentry if dentry is unhashed

Signed-off-by: YoungJun.park <her0gyugyu@gmail.com>
---
 fs/overlayfs/super.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c
index 6a4f2b87f1a3..411d3ed8aec1 100644
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -129,8 +129,8 @@ static int ovl_revalidate_real(struct dentry *d, unsigned int flags, bool weak,
 {
    int ret = 1;

-   /* Invalidate dentry if real was deleted/renamed since we found it */
-   if (ovl_dentry_is_dead(d) || (hash && hash != d->d_name.hash_len)) {
+   /* Invalidate dentry if real was deleted/renamed/unhashed since we found it */
+   if (ovl_dentry_is_dead(d) || (hash && hash != d->d_name.hash_len) || d_unhashed(d)) {
        ret = 0;
    } else if (weak) {
        if (d->d_flags & DCACHE_OP_WEAK_REVALIDATE)
--
2.25.1

2. 

> The dentry should only be considered stale if the real dentry is unhashed
> but ovl entry is hashed.
> 
> The state of both ovl dentry and real dentry unhashed is possible and valid
> I think, but it should not interfere with your use case where ovl dentry is
> hashed and real upper is unhashed.
> 
> I may be missing something so better if Miklos also takes a look at the
> patch.
>

You mean, if I modify the code you said, then the patch I sent works properly? (file open fail)
If you mean it, then I post my patch :)

And the last question, I really curious "hide upperdir from user" idea. If it is meaningful
I want to try to implement it, If it isn't then could you explain why this idea is not meaningful..?

Thanks Amir.

  parent reply	other threads:[~2022-11-08 12:37 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-07  4:29 Question about ESTALE error whene deleting upper directory file YoungJun.Park
2022-11-07  6:40 ` Amir Goldstein
2022-11-07  7:06   ` YoungJun.Park
2022-11-07  8:49     ` Amir Goldstein
2022-11-08  8:14       ` YoungJun.Park
     [not found]         ` <CAOQ4uxi2aGUOCrPb55Q9LGVbqz4M9ZKOhNLnm8kKnsDQgdxYHQ@mail.gmail.com>
2022-11-08 12:37           ` YoungJun.Park [this message]
2022-11-08 19:22             ` Amir Goldstein
2022-11-09  4:16               ` YoungJun.Park
2022-11-09  9:16                 ` Amir Goldstein
2022-11-09  9:34                   ` YoungJun.Park

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221108123734.GA19150@ubuntu \
    --to=her0gyugyu@gmail.com \
    --cc=amir73il@gmail.com \
    --cc=linux-unionfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.