All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergey Senozhatsky <senozhatsky@chromium.org>
To: Minchan Kim <minchan@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>
Cc: Nitin Gupta <ngupta@vflare.org>,
	Suleiman Souhlal <suleiman@google.com>,
	linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	Sergey Senozhatsky <senozhatsky@chromium.org>
Subject: [PATCHv5 02/13] zram: Add recompression algorithm sysfs knob
Date: Wed,  9 Nov 2022 20:50:36 +0900	[thread overview]
Message-ID: <20221109115047.2921851-3-senozhatsky@chromium.org> (raw)
In-Reply-To: <20221109115047.2921851-1-senozhatsky@chromium.org>

Introduce recomp_algorithm sysfs knob that controls
secondary algorithm selection used for recompression.

We will support up to 3 secondary compression algorithms
which are sorted in order of their priority. To select an
algorithm user has to provide its name and priority:

  echo "algo=zstd priority=1" > /sys/block/zramX/recomp_algorithm
  echo "algo=deflate priority=2" > /sys/block/zramX/recomp_algorithm

During recompression zram iterates through the list of registered
secondary algorithms in order of their priorities.

We also have a short version for cases when there is only
one secondary compression algorithm:

  echo "algo=zstd" > /sys/block/zramX/recomp_algorithm

This will register zstd as the secondary algorithm with priority 1.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
---
 drivers/block/zram/zram_drv.c | 124 ++++++++++++++++++++++++++++------
 1 file changed, 105 insertions(+), 19 deletions(-)

diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index 5371ed63c785..56026a6deb70 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -1000,31 +1000,28 @@ static ssize_t max_comp_streams_store(struct device *dev,
 	return len;
 }
 
-static ssize_t comp_algorithm_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
+static void comp_algorithm_set(struct zram *zram, u32 prio, const char *alg)
 {
-	size_t sz;
-	struct zram *zram = dev_to_zram(dev);
+	/* Do not free statically defined compression algorithms */
+	if (zram->comp_algs[prio] != default_compressor)
+		kfree(zram->comp_algs[prio]);
+
+	zram->comp_algs[prio] = alg;
+}
+
+static ssize_t __comp_algorithm_show(struct zram *zram, u32 prio, char *buf)
+{
+	ssize_t sz;
 
 	down_read(&zram->init_lock);
-	sz = zcomp_available_show(zram->comp_algs[ZRAM_PRIMARY_COMP], buf);
+	sz = zcomp_available_show(zram->comp_algs[prio], buf);
 	up_read(&zram->init_lock);
 
 	return sz;
 }
 
-static void comp_algorithm_set(struct zram *zram, u32 prio, const char *alg)
+static int __comp_algorithm_store(struct zram *zram, u32 prio, const char *buf)
 {
-	/* Do not kfree() algs that we didn't allocate, IOW the default ones */
-	if (zram->comp_algs[prio] != default_compressor)
-		kfree(zram->comp_algs[prio]);
-	zram->comp_algs[prio] = alg;
-}
-
-static ssize_t comp_algorithm_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t len)
-{
-	struct zram *zram = dev_to_zram(dev);
 	char *compressor;
 	size_t sz;
 
@@ -1053,11 +1050,94 @@ static ssize_t comp_algorithm_store(struct device *dev,
 		return -EBUSY;
 	}
 
-	comp_algorithm_set(zram, ZRAM_PRIMARY_COMP, compressor);
+	comp_algorithm_set(zram, prio, compressor);
 	up_write(&zram->init_lock);
-	return len;
+	return 0;
+}
+
+static ssize_t comp_algorithm_show(struct device *dev,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	struct zram *zram = dev_to_zram(dev);
+
+	return __comp_algorithm_show(zram, ZRAM_PRIMARY_COMP, buf);
+}
+
+static ssize_t comp_algorithm_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf,
+				    size_t len)
+{
+	struct zram *zram = dev_to_zram(dev);
+	int ret;
+
+	ret = __comp_algorithm_store(zram, ZRAM_PRIMARY_COMP, buf);
+	return ret ? ret : len;
 }
 
+#ifdef CONFIG_ZRAM_MULTI_COMP
+static ssize_t recomp_algorithm_show(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct zram *zram = dev_to_zram(dev);
+	ssize_t sz = 0;
+	u32 prio;
+
+	for (prio = ZRAM_SECONDARY_COMP; prio < ZRAM_MAX_COMPS; prio++) {
+		if (!zram->comp_algs[prio])
+			continue;
+
+		sz += scnprintf(buf + sz, PAGE_SIZE - sz - 2, "#%d: ", prio);
+		sz += __comp_algorithm_show(zram, prio, buf + sz);
+	}
+
+	return sz;
+}
+
+static ssize_t recomp_algorithm_store(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf,
+				      size_t len)
+{
+	struct zram *zram = dev_to_zram(dev);
+	int prio = ZRAM_SECONDARY_COMP;
+	char *args, *param, *val;
+	char *alg = NULL;
+	int ret;
+
+	args = skip_spaces(buf);
+	while (*args) {
+		args = next_arg(args, &param, &val);
+
+		if (!*val)
+			return -EINVAL;
+
+		if (!strcmp(param, "algo")) {
+			alg = val;
+			continue;
+		}
+
+		if (!strcmp(param, "priority")) {
+			ret = kstrtoint(val, 10, &prio);
+			if (ret)
+				return ret;
+			continue;
+		}
+	}
+
+	if (!alg)
+		return -EINVAL;
+
+	if (prio < ZRAM_SECONDARY_COMP || prio >= ZRAM_MAX_COMPS)
+		return -EINVAL;
+
+	ret = __comp_algorithm_store(zram, prio, alg);
+	return ret ? ret : len;
+}
+#endif
+
 static ssize_t compact_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t len)
 {
@@ -1898,6 +1978,9 @@ static DEVICE_ATTR_WO(writeback);
 static DEVICE_ATTR_RW(writeback_limit);
 static DEVICE_ATTR_RW(writeback_limit_enable);
 #endif
+#ifdef CONFIG_ZRAM_MULTI_COMP
+static DEVICE_ATTR_RW(recomp_algorithm);
+#endif
 
 static struct attribute *zram_disk_attrs[] = {
 	&dev_attr_disksize.attr,
@@ -1921,6 +2004,9 @@ static struct attribute *zram_disk_attrs[] = {
 	&dev_attr_bd_stat.attr,
 #endif
 	&dev_attr_debug_stat.attr,
+#ifdef CONFIG_ZRAM_MULTI_COMP
+	&dev_attr_recomp_algorithm.attr,
+#endif
 	NULL,
 };
 
@@ -2000,7 +2086,7 @@ static int zram_add(void)
 	if (ret)
 		goto out_cleanup_disk;
 
-	zram->comp_algs[ZRAM_PRIMARY_COMP] = default_compressor;
+	comp_algorithm_set(zram, ZRAM_PRIMARY_COMP, default_compressor);
 
 	zram_debugfs_register(zram);
 	pr_info("Added device: %s\n", zram->disk->disk_name);
-- 
2.38.1.431.g37b22c650d-goog


  parent reply	other threads:[~2022-11-09 11:51 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-09 11:50 [PATCHv5 00/13] zram: Support multiple compression streams Sergey Senozhatsky
2022-11-09 11:50 ` [PATCHv5 01/13] zram: Preparation for multi-zcomp support Sergey Senozhatsky
2022-11-09 11:50 ` Sergey Senozhatsky [this message]
2022-11-09 11:50 ` [PATCHv5 03/13] zram: Factor out WB and non-WB zram read functions Sergey Senozhatsky
2022-11-09 11:50 ` [PATCHv5 04/13] zram: Introduce recompress sysfs knob Sergey Senozhatsky
2022-11-10 13:09   ` Nathan Chancellor
2022-11-10 14:31     ` Sergey Senozhatsky
2022-11-10 14:38       ` Sergey Senozhatsky
2022-11-10 15:18         ` Nathan Chancellor
2022-11-10 14:34   ` [PATCH] zram: we should always zero out err variable in recompress loop Sergey Senozhatsky
2022-11-14  2:14   ` [PATCH] zram: explicitly limit prio_max for static analyzers Sergey Senozhatsky
2022-11-15  0:41     ` Andrew Morton
2022-11-15  0:47       ` Sergey Senozhatsky
2022-11-09 11:50 ` [PATCHv5 05/13] zram: Add recompress flag to read_block_state() Sergey Senozhatsky
2022-11-09 11:50 ` [PATCHv5 06/13] zram: Clarify writeback_store() comment Sergey Senozhatsky
2022-11-09 11:50 ` [PATCHv5 07/13] zram: Use IS_ERR_VALUE() to check for zs_malloc() errors Sergey Senozhatsky
2022-11-09 11:50 ` [PATCHv5 08/13] zram: add size class equals check into recompression Sergey Senozhatsky
2022-11-09 11:50 ` [PATCHv5 09/13] zram: remove redundant checks from zram_recompress() Sergey Senozhatsky
2022-11-09 11:50 ` [PATCHv5 10/13] zram: Add algo parameter support to zram_recompress() Sergey Senozhatsky
2022-11-09 11:50 ` [PATCHv5 11/13] documentation: Add zram recompression documentation Sergey Senozhatsky
2022-11-09 11:50 ` [PATCHv5 12/13] zram: add incompressible writeback Sergey Senozhatsky
2022-11-09 11:50 ` [PATCHv5 13/13] zram: Add incompressible flag to read_block_state() Sergey Senozhatsky
2022-11-09 21:46 ` [PATCHv5 00/13] zram: Support multiple compression streams Minchan Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221109115047.2921851-3-senozhatsky@chromium.org \
    --to=senozhatsky@chromium.org \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=minchan@kernel.org \
    --cc=ngupta@vflare.org \
    --cc=suleiman@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.