All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Johan Hovold <johan+linaro@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>,
	Andy Gross <agross@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 6/9] arm64: dts: qcom: sc8280xp-crd: enable WiFi controller
Date: Thu, 10 Nov 2022 17:05:13 +0530	[thread overview]
Message-ID: <20221110113513.GA18247@thinkpad> (raw)
In-Reply-To: <20221110103558.12690-7-johan+linaro@kernel.org>

On Thu, Nov 10, 2022 at 11:35:55AM +0100, Johan Hovold wrote:
> Enable the Qualcomm QCNFA765 Wireless Network Adapter connected to
> PCIe4.
> 
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
>  arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 65 +++++++++++++++++++++++
>  1 file changed, 65 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> index 5b9e37a16f9f..ab5b0aadeead 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> @@ -81,6 +81,22 @@ vreg_misc_3p3: regulator-misc-3p3 {
>  		regulator-always-on;
>  	};
>  
> +	vreg_wlan: regulator-wlan {
> +		compatible = "regulator-fixed";
> +
> +		regulator-name = "VCC_WLAN_3R9";
> +		regulator-min-microvolt = <3900000>;
> +		regulator-max-microvolt = <3900000>;
> +
> +		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&hastings_reg_en>;

Hastings is the family name of QCA639x WLAN chipsets. I don't think it would be
applicable here. Please use "wlan_reg_en" as that matches the convention used
throughout this file.

Thanks,
Mani

> +
> +		regulator-boot-on;
> +	};
> +
>  	vreg_wwan: regulator-wwan {
>  		compatible = "regulator-fixed";
>  
> @@ -246,6 +262,25 @@ &pcie3a_phy {
>  	status = "okay";
>  };
>  
> +&pcie4 {
> +	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
> +	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
> +
> +	vddpe-3v3-supply = <&vreg_wlan>;
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie4_default>;
> +
> +	status = "okay";
> +};
> +
> +&pcie4_phy {
> +	vdda-phy-supply = <&vreg_l6d>;
> +	vdda-pll-supply = <&vreg_l4d>;
> +
> +	status = "okay";
> +};
> +
>  &pmc8280c_lpg {
>  	status = "okay";
>  };
> @@ -445,6 +480,13 @@ edp_bl_pwm: edp-bl-pwm-state {
>  	};
>  };
>  
> +&pmr735a_gpios {
> +	hastings_reg_en: hastings-reg-en-state {
> +		pins = "gpio1";
> +		function = "normal";
> +	};
> +};
> +
>  &tlmm {
>  	gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
>  
> @@ -521,6 +563,29 @@ wake-n-pins {
>  		};
>  	};
>  
> +	pcie4_default: pcie4-default-state {
> +		clkreq-n-pins {
> +			pins = "gpio140";
> +			function = "pcie4_clkreq";
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +
> +		perst-n-pins {
> +			pins = "gpio141";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-pull-down;
> +		};
> +
> +		wake-n-pins {
> +			pins = "gpio139";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +	};
> +
>  	qup0_i2c4_default: qup0-i2c4-default-state {
>  		pins = "gpio171", "gpio172";
>  		function = "qup4";
> -- 
> 2.37.4
> 

-- 
மணிவண்ணன் சதாசிவம்

  reply	other threads:[~2022-11-10 11:35 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-10 10:35 [PATCH 0/9] arm64: dts: qcom: sc8280xp/sa8540p: add support for PCIe Johan Hovold
2022-11-10 10:35 ` [PATCH 1/9] arm64: dts: qcom: sc8280xp/sa8540p: add PCIe2-4 nodes Johan Hovold
2022-11-10 10:58   ` Konrad Dybcio
2022-11-10 10:35 ` [PATCH 2/9] arm64: dts: qcom: sa8295p-adp: enable PCIe Johan Hovold
2022-11-10 11:02   ` Konrad Dybcio
2022-11-10 10:35 ` [PATCH 3/9] arm64: dts: qcom: sc8280xp-crd: rename backlight and misc regulators Johan Hovold
2022-11-10 11:07   ` Konrad Dybcio
2022-11-10 10:35 ` [PATCH 4/9] arm64: dts: qcom: sc8280xp-crd: enable NVMe SSD Johan Hovold
2022-11-10 11:06   ` Konrad Dybcio
2022-11-11 16:22     ` Johan Hovold
2022-11-12 13:01       ` Konrad Dybcio
2022-11-10 10:35 ` [PATCH 5/9] arm64: dts: qcom: sc8280xp-crd: enable SDX55 modem Johan Hovold
2022-11-10 10:35 ` [PATCH 6/9] arm64: dts: qcom: sc8280xp-crd: enable WiFi controller Johan Hovold
2022-11-10 11:35   ` Manivannan Sadhasivam [this message]
2022-11-11 16:27     ` Johan Hovold
2022-11-11 20:40       ` Bjorn Andersson
2022-11-12 14:39         ` Manivannan Sadhasivam
2022-11-10 10:35 ` [PATCH 7/9] arm64: dts: qcom: sc8280xp-x13s: enable NVMe SSD Johan Hovold
2022-11-10 10:35 ` [PATCH 8/9] arm64: dts: qcom: sc8280xp-x13s: enable modem Johan Hovold
2022-11-10 10:35 ` [PATCH 9/9] arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller Johan Hovold
2022-11-12  3:51 ` [PATCH 0/9] arm64: dts: qcom: sc8280xp/sa8540p: add support for PCIe Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221110113513.GA18247@thinkpad \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=johan+linaro@kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.