All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lino Sanfilippo <LinoSanfilippo@gmx.de>
To: peterhuewe@gmx.de, jarkko@kernel.org, jgg@ziepe.ca
Cc: stefanb@linux.vnet.ibm.com, linux@mniewoehner.de,
	linux-integrity@vger.kernel.org, linux-kernel@vger.kernel.org,
	jandryuk@gmail.com, pmenzel@molgen.mpg.de,
	l.sanfilippo@kunbus.com, LinoSanfilippo@gmx.de, lukas@wunner.de,
	p.rosenberger@kunbus.com
Subject: [PATCH v9 05/12] tpm, tpm_tis: Only handle supported interrupts
Date: Thu, 10 Nov 2022 16:25:26 +0100	[thread overview]
Message-ID: <20221110152533.24243-6-LinoSanfilippo@gmx.de> (raw)
In-Reply-To: <20221110152533.24243-1-LinoSanfilippo@gmx.de>

From: Lino Sanfilippo <l.sanfilippo@kunbus.com>

According to the TPM Interface Specification (TIS) support for "stsValid"
and "commandReady" interrupts is only optional.
This has to be taken into account when handling the interrupts in functions
like wait_for_tpm_stat(). To determine the supported interrupts use the
capability query.

Also adjust wait_for_tpm_stat() to only wait for interrupt reported status
changes. After that process all the remaining status changes by polling
the status register.

Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
---
 drivers/char/tpm/tpm_tis_core.c | 120 +++++++++++++++++++-------------
 drivers/char/tpm/tpm_tis_core.h |   1 +
 2 files changed, 73 insertions(+), 48 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 52205a1fee9e..d07debc3182c 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -53,41 +53,63 @@ static int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask,
 	long rc;
 	u8 status;
 	bool canceled = false;
+	u8 sts_mask = 0;
+	int ret = 0;
 
 	/* check current status */
 	status = chip->ops->status(chip);
 	if ((status & mask) == mask)
 		return 0;
 
-	stop = jiffies + timeout;
+	/* check what status changes can be handled by irqs */
+	if (priv->int_mask & TPM_INTF_STS_VALID_INT)
+		sts_mask |= TPM_STS_VALID;
 
-	if (chip->flags & TPM_CHIP_FLAG_IRQ) {
+	if (priv->int_mask & TPM_INTF_DATA_AVAIL_INT)
+		sts_mask |= TPM_STS_DATA_AVAIL;
+
+	if (priv->int_mask & TPM_INTF_CMD_READY_INT)
+		sts_mask |= TPM_STS_COMMAND_READY;
+
+	sts_mask &= mask;
+
+	stop = jiffies + timeout;
+	/* process status changes with irq support */
+	if (sts_mask) {
+		ret = -ETIME;
 again:
 		timeout = stop - jiffies;
 		if ((long)timeout <= 0)
 			return -ETIME;
 		rc = wait_event_interruptible_timeout(*queue,
-			wait_for_tpm_stat_cond(chip, mask, check_cancel,
+			wait_for_tpm_stat_cond(chip, sts_mask, check_cancel,
 					       &canceled),
 			timeout);
 		if (rc > 0) {
 			if (canceled)
 				return -ECANCELED;
-			return 0;
+			ret = 0;
 		}
 		if (rc == -ERESTARTSYS && freezing(current)) {
 			clear_thread_flag(TIF_SIGPENDING);
 			goto again;
 		}
-	} else {
-		do {
-			usleep_range(priv->timeout_min,
-				     priv->timeout_max);
-			status = chip->ops->status(chip);
-			if ((status & mask) == mask)
-				return 0;
-		} while (time_before(jiffies, stop));
 	}
+
+	if (ret)
+		return ret;
+
+	mask &= ~sts_mask;
+	if (!mask) /* all done */
+		return 0;
+	/* process status changes without irq support */
+	do {
+		status = chip->ops->status(chip);
+		if ((status & mask) == mask)
+			return 0;
+		usleep_range(priv->timeout_min,
+			     priv->timeout_max);
+	} while (time_before(jiffies, stop));
 	return -ETIME;
 }
 
@@ -1021,8 +1043,40 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 	if (rc < 0)
 		goto out_err;
 
-	intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
-		   TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
+	/* Figure out the capabilities */
+	rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps);
+	if (rc < 0)
+		goto out_err;
+
+	dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
+		intfcaps);
+	if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
+		dev_dbg(dev, "\tBurst Count Static\n");
+	if (intfcaps & TPM_INTF_CMD_READY_INT) {
+		intmask |= TPM_INTF_CMD_READY_INT;
+		dev_dbg(dev, "\tCommand Ready Int Support\n");
+	}
+	if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
+		dev_dbg(dev, "\tInterrupt Edge Falling\n");
+	if (intfcaps & TPM_INTF_INT_EDGE_RISING)
+		dev_dbg(dev, "\tInterrupt Edge Rising\n");
+	if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
+		dev_dbg(dev, "\tInterrupt Level Low\n");
+	if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
+		dev_dbg(dev, "\tInterrupt Level High\n");
+	if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT) {
+		intmask |= TPM_INTF_LOCALITY_CHANGE_INT;
+		dev_dbg(dev, "\tLocality Change Int Support\n");
+	}
+	if (intfcaps & TPM_INTF_STS_VALID_INT) {
+		intmask |= TPM_INTF_STS_VALID_INT;
+		dev_dbg(dev, "\tSts Valid Int Support\n");
+	}
+	if (intfcaps & TPM_INTF_DATA_AVAIL_INT) {
+		intmask |= TPM_INTF_DATA_AVAIL_INT;
+		dev_dbg(dev, "\tData Avail Int Support\n");
+	}
+
 	intmask &= ~TPM_GLOBAL_INT_ENABLE;
 
 	rc = request_locality(chip, 0);
@@ -1056,32 +1110,6 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 		goto out_err;
 	}
 
-	/* Figure out the capabilities */
-	rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps);
-	if (rc < 0)
-		goto out_err;
-
-	dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
-		intfcaps);
-	if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
-		dev_dbg(dev, "\tBurst Count Static\n");
-	if (intfcaps & TPM_INTF_CMD_READY_INT)
-		dev_dbg(dev, "\tCommand Ready Int Support\n");
-	if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
-		dev_dbg(dev, "\tInterrupt Edge Falling\n");
-	if (intfcaps & TPM_INTF_INT_EDGE_RISING)
-		dev_dbg(dev, "\tInterrupt Edge Rising\n");
-	if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
-		dev_dbg(dev, "\tInterrupt Level Low\n");
-	if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
-		dev_dbg(dev, "\tInterrupt Level High\n");
-	if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
-		dev_dbg(dev, "\tLocality Change Int Support\n");
-	if (intfcaps & TPM_INTF_STS_VALID_INT)
-		dev_dbg(dev, "\tSts Valid Int Support\n");
-	if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
-		dev_dbg(dev, "\tData Avail Int Support\n");
-
 	/* INTERRUPT Setup */
 	init_waitqueue_head(&priv->read_queue);
 	init_waitqueue_head(&priv->int_queue);
@@ -1112,7 +1140,9 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 		else
 			tpm_tis_probe_irq(chip, intmask);
 
-		if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) {
+		if (chip->flags & TPM_CHIP_FLAG_IRQ) {
+			priv->int_mask = intmask;
+		} else {
 			dev_err(&chip->dev, FW_BUG
 					"TPM interrupt not working, polling instead\n");
 
@@ -1159,13 +1189,7 @@ static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
 	if (rc < 0)
 		goto out;
 
-	rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
-	if (rc < 0)
-		goto out;
-
-	intmask |= TPM_INTF_CMD_READY_INT
-	    | TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
-	    | TPM_INTF_STS_VALID_INT | TPM_GLOBAL_INT_ENABLE;
+	intmask = priv->int_mask | TPM_GLOBAL_INT_ENABLE;
 
 	tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
 
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index 695a2516dce0..2deef11c88db 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -93,6 +93,7 @@ struct tpm_tis_data {
 	u16 manufacturer_id;
 	int locality;
 	int irq;
+	unsigned int int_mask;
 	unsigned long flags;
 	void __iomem *ilb_base_addr;
 	u16 clkrun_enabled;
-- 
2.36.1


  parent reply	other threads:[~2022-11-10 15:26 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-10 15:25 [PATCH v9 00/12] TPM IRQ fixes Lino Sanfilippo
2022-11-10 15:25 ` [PATCH v9 01/12] tpm, tpm_tis: Avoid cache incoherency in test for interrupts Lino Sanfilippo
2022-11-10 15:25 ` [PATCH v9 02/12] tpm, tpm_tis: Claim locality before writing TPM_INT_ENABLE register Lino Sanfilippo
2022-11-10 15:25 ` [PATCH v9 03/12] tpm, tpm_tis: Disable interrupts if tpm_tis_probe_irq() failed Lino Sanfilippo
2022-11-10 15:25 ` [PATCH v9 04/12] tpm, tmp_tis: Claim locality before writing interrupt registers Lino Sanfilippo
2022-11-10 15:25 ` Lino Sanfilippo [this message]
2022-11-10 15:25 ` [PATCH v9 06/12] tpm, tpm_tis: Move interrupt mask checks into own function Lino Sanfilippo
2022-11-10 15:25 ` [PATCH v9 07/12] tpm, tpm_tis: do not check for the active locality in interrupt handler Lino Sanfilippo
2022-11-10 15:25 ` [PATCH v9 08/12] tpm, tpm: Implement usage counter for locality Lino Sanfilippo
2022-11-10 15:25 ` [PATCH v9 09/12] tpm, tpm_tis: Request threaded interrupt handler Lino Sanfilippo
2022-11-10 15:25 ` [PATCH v9 10/12] tpm, tpm_tis: Claim locality in " Lino Sanfilippo
2022-11-10 15:25 ` [PATCH v9 11/12] tpm, tpm_tis: Claim locality when interrupts are reenabled on resume Lino Sanfilippo
2022-11-10 15:25 ` [PATCH v9 12/12] tpm, tpm_tis: Enable interrupt test Lino Sanfilippo
2022-11-14 13:35   ` Lino Sanfilippo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221110152533.24243-6-LinoSanfilippo@gmx.de \
    --to=linosanfilippo@gmx.de \
    --cc=jandryuk@gmail.com \
    --cc=jarkko@kernel.org \
    --cc=jgg@ziepe.ca \
    --cc=l.sanfilippo@kunbus.com \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@mniewoehner.de \
    --cc=lukas@wunner.de \
    --cc=p.rosenberger@kunbus.com \
    --cc=peterhuewe@gmx.de \
    --cc=pmenzel@molgen.mpg.de \
    --cc=stefanb@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.