All of lore.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Marek Vasut <marex@denx.de>
Cc: devicetree@vger.kernel.org, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	linux-watchdog@vger.kernel.org
Subject: Re: [PATCH v3] dt-bindings: watchdog: gpio: Convert bindings to YAML
Date: Tue, 15 Nov 2022 05:29:47 -0800	[thread overview]
Message-ID: <20221115132947.GB4189373@roeck-us.net> (raw)
In-Reply-To: <20221107160338.27910-1-marex@denx.de>

On Mon, Nov 07, 2022 at 05:03:38PM +0100, Marek Vasut wrote:
> Convert the gpio-wdt bindings from text to YAML ones, to permit DT validation.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Marek Vasut <marex@denx.de>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
> Cc: linux-watchdog@vger.kernel.org
> To: devicetree@vger.kernel.org
> ---
> V2: - Add missing required: properties
>     - Drop quotes around ref: referenced schema file name
> V3: - Add Guenter as maintainer of the bindings
>     - Add RB from Rob
> ---
>  .../devicetree/bindings/watchdog/gpio-wdt.txt | 28 -----------
>  .../bindings/watchdog/linux,wdt-gpio.yaml     | 47 +++++++++++++++++++
>  2 files changed, 47 insertions(+), 28 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/watchdog/gpio-wdt.txt
>  create mode 100644 Documentation/devicetree/bindings/watchdog/linux,wdt-gpio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt b/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt
> deleted file mode 100644
> index 198794963786b..0000000000000
> --- a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt
> +++ /dev/null
> @@ -1,28 +0,0 @@
> -* GPIO-controlled Watchdog
> -
> -Required Properties:
> -- compatible: Should contain "linux,wdt-gpio".
> -- gpios: From common gpio binding; gpio connection to WDT reset pin.
> -- hw_algo: The algorithm used by the driver. Should be one of the
> -  following values:
> -  - toggle: Either a high-to-low or a low-to-high transition clears
> -    the WDT counter. The watchdog timer is disabled when GPIO is
> -    left floating or connected to a three-state buffer.
> -  - level: Low or high level starts counting WDT timeout,
> -    the opposite level disables the WDT. Active level is determined
> -    by the GPIO flags.
> -- hw_margin_ms: Maximum time to reset watchdog circuit (milliseconds).
> -
> -Optional Properties:
> -- always-running: If the watchdog timer cannot be disabled, add this flag to
> -  have the driver keep toggling the signal without a client. It will only cease
> -  to toggle the signal when the device is open and the timeout elapsed.
> -
> -Example:
> -	watchdog: watchdog {
> -		/* ADM706 */
> -		compatible = "linux,wdt-gpio";
> -		gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
> -		hw_algo = "toggle";
> -		hw_margin_ms = <1600>;
> -	};
> diff --git a/Documentation/devicetree/bindings/watchdog/linux,wdt-gpio.yaml b/Documentation/devicetree/bindings/watchdog/linux,wdt-gpio.yaml
> new file mode 100644
> index 0000000000000..c729c96a5dc75
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/linux,wdt-gpio.yaml
> @@ -0,0 +1,47 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/watchdog/linux,wdt-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: GPIO-controlled Watchdog
> +
> +maintainers:
> +  - Guenter Roeck <linux@roeck-us.net>
> +
> +properties:
> +  compatible:
> +    const: linux,wdt-gpio
> +
> +  gpios:
> +    description: gpio connection to WDT reset pin
> +    maxItems: 1
> +
> +  hw_algo:
> +    description: The algorithm used by the driver.
> +    enum: [ level, toggle ]
> +
> +  hw_margin_ms:
> +    description: Maximum time to reset watchdog circuit (milliseconds).
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +required:
> +  - compatible
> +  - gpios
> +  - hw_algo
> +  - hw_margin_ms
> +
> +allOf:
> +  - $ref: watchdog.yaml#
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    watchdog {
> +        compatible = "linux,wdt-gpio";
> +        gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
> +        hw_algo = "toggle";
> +        hw_margin_ms = <1600>;
> +    };
> -- 
> 2.35.1
> 

  reply	other threads:[~2022-11-15 13:30 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-07 16:03 [PATCH v3] dt-bindings: watchdog: gpio: Convert bindings to YAML Marek Vasut
2022-11-15 13:29 ` Guenter Roeck [this message]
2022-12-15 20:37 ` Rob Herring
2022-12-15 22:45   ` Marek Vasut
2022-12-15 22:46     ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221115132947.GB4189373@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=marex@denx.de \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.