* [PULL V2] IIO: First set of new device support, features and cleanup for 6.2
@ 2022-11-23 20:08 Jonathan Cameron
2022-11-25 17:36 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2022-11-23 20:08 UTC (permalink / raw)
To: gregkh, linux-iio
The following changes since commit 30a0b95b1335e12efef89dd78518ed3e4a71a763:
Linux 6.1-rc3 (2022-10-30 15:19:28 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.2a-take2
for you to fetch changes up to 12491d35551df69709777bd7769e1e33641943cc:
iio: pressure: bmp280: convert to i2c's .probe_new() (2022-11-23 20:01:38 +0000)
----------------------------------------------------------------
1st set of IIO new device support, feature and cleanup for 6.2 (take2)
We have finally managed to take the mlock mutex entirely private so as
to avoid it being used for multiple purposes. Now it is just used to
protect device mode transitions (typically to and from buffered capture).
Includes merge of an immutable i2c branch to get the new
i2c_client_get_device_id() (thanks to Wolfram for providing the branch).
Based on rc3 to pick up some precursor fixes from early in the cycle and
avoid an unnecessarily messy history.
New device support
* adi,ad4310
- New driver to support this very flexible measurement device including
a 24 bit ADC. Later fix for documentation build issue.
* adi,adxl355
- Add support of the ADXL359 accelerometer.
* adi,ltc2983
- Support additional variants of the temperatures sensor:
LTC2984 with an EEPROM
LTC2985, LTC2986 with only 10 channels.
* invensense,icm42600
- Add support for icm42631 (needed only ID and WHOAMI)
* kionix,kx022a
- New driver for this 3 axis accelerometer.
* maxim,max11401
- New driver to support this 24-bit 10 channel ADC.
Includes some new ABI to support configuration of notch filters.
* mediatek,mt6370
- Add new driver to support the ADC part of the mt6370.
* st,lsm6dsx
- Add support for LSM6DSV accelerometer and gyroscope. Simple additional
of chip specific data and IDs.
- Add support for LSM6DSV16X accelerometer and gyroscope. Compatible with
features currently implemented for the LSM6DSV.
* st,stm32-adc
- Add support for stm32pm13x SoCs.
core / subsystem wide:
- Add new IIO_STATIC_CONST_DEVICE_ATTR() which is a dance necessary to
allow for the wrapping of attributes in the code that duplicates them
for multiple buffers.
- Harden against future issues with expectation that all buffer attributes
are iio_dev_attrs by changing the code to take an array of pointers
of the correct type.
- Last transitions of drivers to local locks rather than missuses of mlock.
- Add an iio_device_claim_buffer_mode() callback to avoid a race in the
max30100 driver without directly using mlock.
- Move mlock to the opaque IIO device structure to prevent misuse.
- Add missing spi_device_id tables to support auto loading of modules.
- Update some ADI maintainers in DT bindings.
- A few more moves of bus drivers and core module sets to export
name spaces.
- Extensive use of new devm_regulator_get_enable() and friends.
- Switch a bunch of i2c drivers to probe_new() including the bmp280
which makes use of the new i2c_client_get_device_id() helper to
simplify this change.
dt-bindings:
- More use of spi-peripheral-props.yaml.
Features
* freescale,mpl115
- Use runtime PM to implement shutdown GPIO support.
* melexis,mlx90632
- More sophisticated runtime power management
- Provide access to sampling frequency.
- Trivial follow up fixes.
* microchip,mcp3911
- Support control of PGA.
* st,lsm6dsx
- Add support for software triggers for cases where the IRQ lines
are not wired up.
* vishay,vcnl4000
- Add control of integration time.
Minor cleanups and fixes
* adi,ad4130
- Improve ABI documentation formatting.
- Kconfig dependency fixup.
* adi,ad5758
- Minor dt binding fix.
* adi,ad9834
- Tidy up line breaks.
* adi,ade7854
- Minor improvement in code clarity by replacing a ternary.
* adi,admv8818
- Harden code against hardware returning wrong values.
* adi,adxl355
- Warn only if unknown device ID detected to allow for fall back
device tree compatibles on future devices.
* adi,ltc2983
- dt-bindings clarifications and general improvements.
- Ensure DMA safe buffer for bulk writes without relying on current
regmap implementation choices.
* avago,adps9960
- Fix up a disconnect between event enable attributes and what was
enabled.
* bosch,bma400
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* cosmic,cc10001
- Fully devm managed probe() and related tidying up.
* meas,ms5611
- Add an example of spi-max-frequency.
* meleixs,mlx90632
- Tidy up confusing error return value.
- Style improvements.
* multiplexer
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* qcom,spmi-vadc
- Minor dt binding improvements.
* rockchip,saradc
- Add ID for rv1126.
* semtech,sx9360
- Add SAMM0208 ACPI ID. Doesn't appear to be a valid vendor prefix
but is in the wild.
* st,lsm6dsx
- Factor out common code as _device_set_enable().
- Fix up wrong docs after LSM6DSV addition.
* st,stm32-adc
- Manage the min sampling time on all internal channels.
* trig,sysfs
- Improve error labels.
----------------------------------------------------------------
Angel Iglesias (2):
i2c: core: Introduce i2c_client_get_device_id helper function
iio: pressure: bmp280: convert to i2c's .probe_new()
Bagas Sanjaya (1):
Documentation: ad4130: format list of in_voltage-voltage_filter_mode_available modes
ChiaEn Wu (1):
iio: adc: mt6370: Add MediaTek MT6370 support
Colin Ian King (1):
iio: adc: ad4130: Fix spelling mistake "diffreential" -> "differential"
Cosmin Tanislav (16):
dt-bindings: iio: adc: add AD4130
iio: adc: ad4130: add AD4130 driver
iio: temperature: ltc2983: make bulk write buffer DMA-safe
dt-bindings: iio: temperature: ltc2983: add default values
dt-bindings: iio: temperature: ltc2983: use hex for sensor address
dt-bindings: iio: temperature: ltc2983: remove qutations from phandle ref
dt-bindings: iio: temperature: ltc2983: describe matrix items
dt-bindings: iio: temperature: ltc2983: require custom sensor tables
dt-bindings: iio: temperature: ltc2983: require 4 wire rtd for current rotate
dt-bindings: iio: temperature: ltc2983: change default excitation for custom thermistors
dt-bindings: iio: temperature: ltc2983: refine descriptions
dt-bindings: iio: temperature: ltc2983: describe broken mux delay property
dt-bindings: iio: temperature: ltc2983: use generic node name in example
dt-bindings: iio: temperature: ltc2983: support more parts
iio: temperature: ltc2983: support more parts
iio: adc: ad4130: depend on GPIOLIB
Crt Mori (4):
iio: temperature: mlx90632 Add runtime powermanagement modes
iio: temperature: mlx90632 Read sampling frequency
iio: temperature: mlx90632 Change return value of sensor measurement channel
iio: temperature: mlx90632 Style alignment for the driver
Deepak R Varma (2):
staging: iio: frequency: ad9834: merge unnecessary split lines
staging: iio: meter: replace ternary operator by if condition
Gwendal Grignou (1):
iio: proximity: sx9360: Add a new ACPI hardware ID
Ibrahim Tilki (3):
iio: adc: add max11410 adc driver
dt-bindings: iio: adc: add adi,max11410.yaml
Documentation: ABI: testing: add max11410 doc
Jagan Teki (1):
dt-bindings: iio: adc: rockchip-saradc: Add saradc for rv1126
Jay Greco (2):
iio: imu: inv_icm42600: Add support for icm42631
dt-bindings: iio: imu: Add inv_icm42600 documentation
Jonathan Cameron (23):
iio: accel: fxls8962af: Use new EXPORT_NS_GPL_DEV_PM_OPS()
iio: gyro: fxas210002c: Move exports to IIO_FXAS210002C namespace.
iio: imu: inv_icm42600: Move exports to IIO_ICM42600 namespace
iio: imu: inv_mpu: Move exports to IIO_MPU6050 namespace
iio: accel: adxl367: Use devm_regulator_bulk_get_enable()
iio: accel: fxls8962af: Use devm_regulator_get_enable()
iio: accel: kxcjk-1013: Use devm_regulator_bulk_get_enable()
iio: accel: msa311: Use devm_regulator_get_enable()
iio: cdc: ad7150: Use devm_regulator_get_enable()
iio: st_sensors: core and lsm9ds0 switch to devm_regulator_bulk_get_enable()
iio: frequency: ad9523: Use devm_regulator_get_enable()
iio: humidity: hts211: Use devm_regulator_get_enable()
iio: light: ltr501: Use devm_regulator_bulk_get_enable()
iio: light: noa1305: Use devm_regulator_get_enable()
iio: proximity: sx_common: Use devm_regulator_bulk_get_enable()
iio: adc: cc10001: Add local struct device *dev variable to avoid repitition
iio: adc: cc10001: Add devm_add_action_or_reset() to disable regulator.
iio: adc: cc10001: Use devm_clk_get_enabled() to avoid boilerplate.
iio: adc: cc10001: Use devm_ to call device power down.
iio: adc: cc10001: Switch remaining IIO calls in probe to devm_ forms.
iio: temperature: mlx90632: Add error handling for devm_pm_runtime_enable()
iio: temperature: mlx90632: Add missing static marking on devm_pm_ops
Merge remote-tracking branch 'i2c/i2c/client_device_id_helper-immutable' into togreg
Krzysztof Kozlowski (10):
dt-bindings: iio: addac: adi,ad74413r: use spi-peripheral-props.yaml
dt-bindings: iio: addac: adi,ad74413r: improve example
dt-bindings: iio: frequency: use spi-peripheral-props.yaml
dt-bindings: iio: gyroscope: use spi-peripheral-props.yaml
dt-bindings: iio: imu: adi,adis16475: use spi-peripheral-props.yaml
dt-bindings: iio: pressure: use spi-peripheral-props.yaml
dt-bindings: iio: proximity: ams,as3935: use spi-peripheral-props.yaml
dt-bindings: iio: resolver: adi,ad2s90: use spi-peripheral-props.yaml
dt-bindings: iio: adc: qcom,spmi-vadc: simplify compatible enum
dt-bindings: iio: adc: qcom,spmi-vadc: extend example
Lorenzo Bianconi (7):
iio: imu: st_lsm6dsx: introduce st_lsm6dsx_device_set_enable routine
iio: imu: st_lsm6dsx: introduce sw trigger support
iio: imu: st_lsm6dsx: add support to LSM6DSV
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsv device bindings
iio: imu: st_lsm6dsx: add support to LSM6DSV16X
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsv16x
iio: imu: st_lsm6dsx: fix LSM6DSV sensor description
Marcus Folkesson (1):
iio: adc: mcp3911: add support to set PGA
Matti Vaittinen (18):
iio: adc: ad7192: Simplify using devm_regulator_get_enable()
iio: dac: ltc2688: Simplify using devm_regulator_*get_enable()
iio: gyro: bmg160_core: Simplify using devm_regulator_*get_enable()
iio: imu: st_lsm6dsx: Simplify using devm_regulator_*get_enable()
iio: adc: ad7476: simplify using devm_regulator_get_enable()
iio: adc: ad7606: simplify using devm_regulator_get_enable()
iio: adc: max1241: simplify using devm_regulator_get_enable()
iio: adc: max1363: simplify using devm_regulator_get_enable()
iio: amplifier: hmc425a: simplify using devm_regulator_get_enable()
dt-bindings: iio: Add KX022A accelerometer
iio: accel: Support Kionix/ROHM KX022A accelerometer
MAINTAINERS: Add KX022A maintainer entry
iio: Add IIO_STATIC_CONST_DEVICE_ATTR
iio: adxl367: Use IIO_STATIC_CONST_DEVICE_ATTR()
iio: adxl372: Use IIO_STATIC_CONST_DEVICE_ATTR()
iio: bmc150-accel-core: Use IIO_STATIC_CONST_DEVICE_ATTR()
iio: at91-sama5d2_adc: Use IIO_STATIC_CONST_DEVICE_ATTR()
iio: Don't silently expect attribute types
Mitja Spes (1):
dt-bindings: iio: pressure: meas,ms5611: add max SPI frequency to the example
Mårten Lindahl (2):
iio: light: vcnl4000: Preserve conf bits when toggle power
iio: light: vcnl4000: Add ps_it attributes for vcnl4040
Nuno Sá (19):
iio: adc: ad_sigma_delta: do not use internal iio_dev lock
iio: adc: ad799x: do not use internal iio_dev lock
iio: adc: axp288_adc: do not use internal iio_dev lock
iio: adc: imx7d_adc: do not use internal iio_dev lock
iio: adc: lpc32xx_adc: do not use internal iio_dev lock
iio: adc: ltc2947-core: do not use internal iio_dev lock
iio: adc: meson_saradc: do not use internal iio_dev lock
iio: adc: rockchip_saradc: do not use internal iio_dev lock
iio: adc: sc27xx_adc: do not use internal iio_dev lock
iio: adc: vf610_adc: add helper function to read samples
iio: adc: vf610_adc: vf610_adc: do not use internal iio_dev lock
iio: common: scmi_iio: do not use internal iio_dev lock
iio: gyro: itg3200_core: do not use internal iio_dev lock
dt-bindings: iio: dac: change ad5766 maintainer
dt-bindings: iio: frequency: change admv4420 maintainer
iio: core: introduce iio_device_{claim|release}_buffer_mode() APIs
iio: health: max30100: do not use internal iio_dev lock
iio: health: max30102: do not use internal iio_dev lock
iio: core: move 'mlock' to 'struct iio_dev_opaque'
Olivier Moysan (3):
dt-bindings: iio: adc: stm32-adc: add stm32mp13 compatibles
iio: adc: stm32-adc: add stm32mp13 support
iio: adc: stm32: manage min sampling time on all internal channels
Rajat Khandelwal (1):
iio: pressure: mpl115: Implementing low power mode by shutdown gpio
Ramona Bolboaca (3):
drivers: iio: accel: Use warning if invalid device id is detected
dt-bindings: iio: accel: Add docs for ADXL359
drivers: iio: accel: Add support for ADXL359 device
Rob Herring (1):
dt-bindings: iio: dac: adi,ad5758: Drop 'contains' from 'adi,dc-dc-mode'
Subhajit Ghosh (1):
iio: light: apds9960: Fix iio_event_spec structures
Uwe Kleine-König (14):
iio: accel: adxl367: Convert to i2c's .probe_new()
iio: accel: da311: Convert to i2c's .probe_new()
iio: accel: dmard06: Convert to i2c's .probe_new()
iio: accel: dmard09: Convert to i2c's .probe_new()
iio: accel: dmard10: Convert to i2c's .probe_new()
iio: accel: kxsd9: Convert to i2c's .probe_new()
iio: accel: mc3230: Convert to i2c's .probe_new()
iio: accel: mma7660: Convert to i2c's .probe_new()
iio: accel: mxc4005: Convert to i2c's .probe_new()
iio: accel: mxc6255: Convert to i2c's .probe_new()
iio: accel: stk8312: Convert to i2c's .probe_new()
iio: accel: stk8ba50: Convert to i2c's .probe_new()
iio: accel: st_magn: Convert to i2c's .probe_new()
iio: accel: vl6180: Convert to i2c's .probe_new()
Wei Yongjun (6):
iio: filter: admv8818: close potential out-of-bounds read in __admv8818_read_[h|l]pf_freq()
iio: adc: ti-ads131e08: Silence no spi_device_id warnings
iio: accel: sca3300: Silence no spi_device_id warning
iio: adc: ad9467: Silence no spi_device_id warnings
iio: adc: ad7192: Silence no spi_device_id warnings
iio: adc: ad7124: Silence no spi_device_id warnings
Yang Yingliang (2):
iio: multiplexer: Switch to use dev_err_probe() helper
iio: trigger: sysfs: rename error label in iio_sysfs_trigger_probe()
Yuan Can (1):
iio: accel: bma400: Switch to use dev_err_probe() helper
Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 | 46 +
.../ABI/testing/sysfs-bus-iio-adc-max11410 | 13 +
.../devicetree/bindings/iio/accel/adi,adxl355.yaml | 8 +-
.../bindings/iio/accel/kionix,kx022a.yaml | 65 +
.../devicetree/bindings/iio/adc/adi,ad4130.yaml | 259 +++
.../devicetree/bindings/iio/adc/adi,max11410.yaml | 177 ++
.../bindings/iio/adc/qcom,spmi-vadc.yaml | 106 +-
.../bindings/iio/adc/rockchip-saradc.yaml | 1 +
.../devicetree/bindings/iio/adc/st,stm32-adc.yaml | 68 +-
.../bindings/iio/addac/adi,ad74413r.yaml | 12 +-
.../devicetree/bindings/iio/dac/adi,ad5758.yaml | 3 +-
.../devicetree/bindings/iio/dac/adi,ad5766.yaml | 2 +-
.../bindings/iio/frequency/adi,adf4350.yaml | 7 +-
.../bindings/iio/frequency/adi,admv1013.yaml | 5 +-
.../bindings/iio/frequency/adi,admv1014.yaml | 5 +-
.../bindings/iio/frequency/adi,admv4420.yaml | 8 +-
.../bindings/iio/frequency/adi,adrf6780.yaml | 5 +-
.../bindings/iio/gyroscope/adi,adxrs290.yaml | 5 +-
.../bindings/iio/gyroscope/nxp,fxas21002c.yaml | 5 +-
.../devicetree/bindings/iio/imu/adi,adis16475.yaml | 3 +-
.../bindings/iio/imu/invensense,icm42600.yaml | 1 +
.../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 4 +
.../bindings/iio/pressure/meas,ms5611.yaml | 6 +-
.../bindings/iio/pressure/murata,zpa2326.yaml | 5 +-
.../bindings/iio/proximity/ams,as3935.yaml | 5 +-
.../bindings/iio/resolver/adi,ad2s90.yaml | 7 +-
.../bindings/iio/temperature/adi,ltc2983.yaml | 335 ++--
MAINTAINERS | 15 +
drivers/i2c/i2c-core-base.c | 14 +
drivers/iio/TODO | 3 -
drivers/iio/accel/Kconfig | 21 +
drivers/iio/accel/Makefile | 3 +
drivers/iio/accel/adxl355.h | 20 +-
drivers/iio/accel/adxl355_core.c | 93 +-
drivers/iio/accel/adxl355_i2c.c | 22 +-
drivers/iio/accel/adxl355_spi.c | 19 +-
drivers/iio/accel/adxl367.c | 57 +-
drivers/iio/accel/adxl367_i2c.c | 5 +-
drivers/iio/accel/adxl372.c | 29 +-
drivers/iio/accel/bma400_core.c | 10 +-
drivers/iio/accel/bmc150-accel-core.c | 31 +-
drivers/iio/accel/da311.c | 5 +-
drivers/iio/accel/dmard06.c | 5 +-
drivers/iio/accel/dmard09.c | 5 +-
drivers/iio/accel/dmard10.c | 5 +-
drivers/iio/accel/fxls8962af-core.c | 40 +-
drivers/iio/accel/fxls8962af-i2c.c | 2 +-
drivers/iio/accel/fxls8962af-spi.c | 2 +-
drivers/iio/accel/kionix-kx022a-i2c.c | 51 +
drivers/iio/accel/kionix-kx022a-spi.c | 58 +
drivers/iio/accel/kionix-kx022a.c | 1142 +++++++++++
drivers/iio/accel/kionix-kx022a.h | 82 +
drivers/iio/accel/kxcjk-1013.c | 25 +-
drivers/iio/accel/kxsd9-i2c.c | 5 +-
drivers/iio/accel/mc3230.c | 5 +-
drivers/iio/accel/mma7660.c | 5 +-
drivers/iio/accel/msa311.c | 21 +-
drivers/iio/accel/mxc4005.c | 5 +-
drivers/iio/accel/mxc6255.c | 5 +-
drivers/iio/accel/sca3300.c | 12 +-
drivers/iio/accel/stk8312.c | 5 +-
drivers/iio/accel/stk8ba50.c | 5 +-
drivers/iio/adc/Kconfig | 40 +
drivers/iio/adc/Makefile | 3 +
drivers/iio/adc/ad4130.c | 2100 ++++++++++++++++++++
drivers/iio/adc/ad7124.c | 10 +
drivers/iio/adc/ad7192.c | 27 +-
drivers/iio/adc/ad7476.c | 11 +-
drivers/iio/adc/ad7606.c | 22 +-
drivers/iio/adc/ad7606.h | 2 -
drivers/iio/adc/ad799x.c | 20 +-
drivers/iio/adc/ad9467.c | 11 +
drivers/iio/adc/ad_sigma_delta.c | 8 +-
drivers/iio/adc/at91-sama5d2_adc.c | 33 +-
drivers/iio/adc/axp288_adc.c | 9 +-
drivers/iio/adc/cc10001_adc.c | 89 +-
drivers/iio/adc/imx7d_adc.c | 14 +-
drivers/iio/adc/lpc32xx_adc.c | 11 +-
drivers/iio/adc/ltc2497-core.c | 7 +-
drivers/iio/adc/ltc2497.h | 2 +
drivers/iio/adc/max11410.c | 1050 ++++++++++
drivers/iio/adc/max1241.c | 28 +-
drivers/iio/adc/max1363.c | 12 +-
drivers/iio/adc/mcp3911.c | 104 +-
drivers/iio/adc/meson_saradc.c | 11 +-
drivers/iio/adc/mt6370-adc.c | 305 +++
drivers/iio/adc/rockchip_saradc.c | 15 +-
drivers/iio/adc/sc27xx_adc.c | 14 +-
drivers/iio/adc/stm32-adc-core.c | 30 +-
drivers/iio/adc/stm32-adc-core.h | 30 +
drivers/iio/adc/stm32-adc.c | 236 ++-
drivers/iio/adc/ti-ads131e08.c | 11 +
drivers/iio/adc/vf610_adc.c | 104 +-
drivers/iio/amplifiers/hmc425a.c | 17 +-
drivers/iio/buffer/industrialio-buffer-dmaengine.c | 4 +-
drivers/iio/buffer/industrialio-triggered-buffer.c | 4 +-
drivers/iio/buffer/kfifo_buf.c | 2 +-
drivers/iio/cdc/ad7150.c | 18 +-
.../common/cros_ec_sensors/cros_ec_sensors_core.c | 6 +-
.../iio/common/hid-sensors/hid-sensor-trigger.c | 8 +-
drivers/iio/common/scmi_sensors/scmi_iio.c | 9 +-
drivers/iio/common/st_sensors/st_sensors_core.c | 39 +-
drivers/iio/dac/ltc2688.c | 23 +-
drivers/iio/filter/admv8818.c | 4 +-
drivers/iio/frequency/ad9523.c | 22 +-
drivers/iio/gyro/bmg160_core.c | 24 +-
drivers/iio/gyro/fxas21002c_core.c | 21 +-
drivers/iio/gyro/fxas21002c_i2c.c | 3 +-
drivers/iio/gyro/fxas21002c_spi.c | 3 +-
drivers/iio/gyro/itg3200_core.c | 10 +-
drivers/iio/health/max30100.c | 15 +-
drivers/iio/health/max30102.c | 19 +-
drivers/iio/humidity/hts221.h | 2 -
drivers/iio/humidity/hts221_core.c | 27 +-
drivers/iio/imu/inv_icm42600/inv_icm42600.h | 2 +
drivers/iio/imu/inv_icm42600/inv_icm42600_core.c | 26 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c | 6 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c | 6 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 17 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 3 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 3 +-
drivers/iio/imu/st_lsm6dsx/Kconfig | 3 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 20 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 16 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 333 +++-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 10 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 4 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 10 +
drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c | 65 +-
drivers/iio/industrialio-buffer.c | 40 +-
drivers/iio/industrialio-core.c | 58 +-
drivers/iio/industrialio-event.c | 4 +-
drivers/iio/industrialio-trigger.c | 12 +-
drivers/iio/light/apds9960.c | 20 +-
drivers/iio/light/ltr501.c | 27 +-
drivers/iio/light/noa1305.c | 26 +-
drivers/iio/light/vcnl4000.c | 185 +-
drivers/iio/light/vl6180.c | 5 +-
drivers/iio/magnetometer/st_magn_i2c.c | 5 +-
drivers/iio/multiplexer/iio-mux.c | 8 +-
drivers/iio/pressure/bmp280-i2c.c | 6 +-
drivers/iio/pressure/mpl115.c | 62 +-
drivers/iio/pressure/mpl115.h | 5 +
drivers/iio/pressure/mpl115_i2c.c | 1 +
drivers/iio/pressure/mpl115_spi.c | 1 +
drivers/iio/proximity/sx9360.c | 1 +
drivers/iio/proximity/sx_common.c | 23 +-
drivers/iio/proximity/sx_common.h | 2 -
drivers/iio/temperature/ltc2983.c | 193 +-
drivers/iio/temperature/mlx90632.c | 474 ++++-
drivers/iio/trigger/iio-trig-sysfs.c | 14 +-
drivers/staging/iio/frequency/ad9834.c | 6 +-
drivers/staging/iio/meter/ade7854-i2c.c | 5 +-
include/linux/i2c.h | 1 +
include/linux/iio/buffer_impl.h | 2 +-
include/linux/iio/common/st_sensors.h | 4 -
include/linux/iio/gyro/itg3200.h | 2 +
include/linux/iio/iio-opaque.h | 2 +
include/linux/iio/iio.h | 5 +-
include/linux/iio/kfifo_buf.h | 3 +-
include/linux/iio/sysfs.h | 11 +
include/linux/iio/triggered_buffer.h | 6 +-
162 files changed, 8083 insertions(+), 1307 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-max11410
create mode 100644 Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml
create mode 100644 drivers/iio/accel/kionix-kx022a-i2c.c
create mode 100644 drivers/iio/accel/kionix-kx022a-spi.c
create mode 100644 drivers/iio/accel/kionix-kx022a.c
create mode 100644 drivers/iio/accel/kionix-kx022a.h
create mode 100644 drivers/iio/adc/ad4130.c
create mode 100644 drivers/iio/adc/max11410.c
create mode 100644 drivers/iio/adc/mt6370-adc.c
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PULL V2] IIO: First set of new device support, features and cleanup for 6.2
2022-11-23 20:08 [PULL V2] IIO: First set of new device support, features and cleanup for 6.2 Jonathan Cameron
@ 2022-11-25 17:36 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2022-11-25 17:36 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Wed, Nov 23, 2022 at 08:08:02PM +0000, Jonathan Cameron wrote:
> The following changes since commit 30a0b95b1335e12efef89dd78518ed3e4a71a763:
>
> Linux 6.1-rc3 (2022-10-30 15:19:28 -0700)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.2a-take2
>
That worked, thanks for fixing it up. pulled and pushed out now.
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-11-25 17:37 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-23 20:08 [PULL V2] IIO: First set of new device support, features and cleanup for 6.2 Jonathan Cameron
2022-11-25 17:36 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.