[RFC PATCH] arm64: dts: qcom: Use plural _gpios node label for PMIC gpios

[Marijn Suijten <marijn.suijten@somainline.org>]

The gpio node in PMIC dts'es define access to multiple GPIOs.  Most Qcom
PMICs were already using the plural _gpios label to point to this node,
but a few PMICs were left behind including the recently-pulled
pm(i)8950.

Rename it from *_gpio to *_gpios for pm6125, pm6150(l), pm8005,
pm(i)8950, and pm(i)8998.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>

---

This was brought up for discussion in [1] but hasn't seen any relevant
reply, unfortunately.

[1]: https://lore.kernel.org/linux-arm-msm/20221104234435.xwjpwfxs73puvfca@SoMainline.org/
---
 arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts  |  8 ++++----
 .../dts/qcom/msm8998-oneplus-cheeseburger.dts    |  4 ++--
 .../boot/dts/qcom/msm8998-oneplus-common.dtsi    |  6 +++---
 .../qcom/msm8998-sony-xperia-yoshino-maple.dts   |  4 ++--
 .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi    | 16 ++++++++--------
 .../arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts |  4 ++--
 arch/arm64/boot/dts/qcom/pm6125.dtsi             |  4 ++--
 arch/arm64/boot/dts/qcom/pm6150.dtsi             |  4 ++--
 arch/arm64/boot/dts/qcom/pm6150l.dtsi            |  4 ++--
 arch/arm64/boot/dts/qcom/pm8005.dtsi             |  4 ++--
 arch/arm64/boot/dts/qcom/pm8950.dtsi             |  4 ++--
 arch/arm64/boot/dts/qcom/pm8998.dtsi             |  4 ++--
 arch/arm64/boot/dts/qcom/pmi8950.dtsi            |  4 ++--
 arch/arm64/boot/dts/qcom/pmi8998.dtsi            |  4 ++--
 arch/arm64/boot/dts/qcom/sc7180-idp.dts          |  4 ++--
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi     |  4 ++--
 arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi       |  4 ++--
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts       | 16 ++++++++--------
 arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi   |  4 ++--
 .../boot/dts/qcom/sdm845-oneplus-common.dtsi     |  6 +++---
 .../arm64/boot/dts/qcom/sdm845-shift-axolotl.dts |  4 ++--
 .../boot/dts/qcom/sdm845-sony-xperia-tama.dtsi   |  2 +-
 .../dts/qcom/sdm845-xiaomi-beryllium-common.dtsi |  4 ++--
 .../boot/dts/qcom/sdm845-xiaomi-polaris.dts      |  4 ++--
 .../dts/qcom/sm6125-sony-xperia-seine-pdx201.dts |  2 +-
 25 files changed, 64 insertions(+), 64 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index 310f7a2df1e8..0e273938b59d 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -113,7 +113,7 @@ gpio-keys {
 			    <&cam_snapshot_pin_a>;
 		button-vol-up {
 			label = "Volume Up";
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_VOLUMEUP>;
 			gpio-key,wakeup;
@@ -122,7 +122,7 @@ button-vol-up {
 
 		button-camera-snapshot {
 			label = "Camera Snapshot";
-			gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_CAMERA>;
 			debounce-interval = <15>;
@@ -130,7 +130,7 @@ button-camera-snapshot {
 
 		button-camera-focus {
 			label = "Camera Focus";
-			gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_CAMERA_FOCUS>;
 			debounce-interval = <15>;
@@ -338,7 +338,7 @@ pm8005_s1: s1 { /* VDD_GFX supply */
 	};
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	vol_up_pin_a: vol-up-active-state {
 		pins = "gpio6";
 		function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
index 9fb1fb9b8529..d36b36af49d0 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
@@ -23,7 +23,7 @@ leds {
 		pinctrl-0 = <&button_backlight_default>;
 
 		led-keypad-backlight {
-			gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>;
+			gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
 			color = <LED_COLOR_ID_WHITE>;
 			function = LED_FUNCTION_KBD_BACKLIGHT;
 			default-state = "off";
@@ -31,7 +31,7 @@ led-keypad-backlight {
 	};
 };
 
-&pmi8998_gpio {
+&pmi8998_gpios {
 	button_backlight_default: button-backlight-state {
 		pins = "gpio5";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
index 7d4a67d07501..ce03c7c239e5 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -92,7 +92,7 @@ gpio-keys {
 
 		button-vol-down {
 			label = "Volume down";
-			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 			debounce-interval = <15>;
 			wakeup-source;
@@ -100,7 +100,7 @@ button-vol-down {
 
 		button-vol-up {
 			label = "Volume up";
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			debounce-interval = <15>;
 			wakeup-source;
@@ -269,7 +269,7 @@ pm8005_s1: s1 {
 	};
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	vol_keys_default: vol-keys-state {
 		pins = "gpio5", "gpio6";
 		function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
index 20fe0394a3c1..1868ad649415 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
@@ -20,7 +20,7 @@ disp_dvdd_vreg: disp-dvdd-vreg {
 		regulator-max-microvolt = <1350000>;
 		startup-delay-us = <0>;
 		enable-active-high;
-		gpio = <&pmi8998_gpio 10 GPIO_ACTIVE_HIGH>;
+		gpio = <&pmi8998_gpios 10 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&disp_dvdd_en>;
 	};
@@ -37,7 +37,7 @@ &lab {
 	qcom,soft-start-us = <200>;
 };
 
-&pmi8998_gpio {
+&pmi8998_gpios {
 	disp_dvdd_en: disp-dvdd-en-active-state {
 		pins = "gpio10";
 		function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 5da87baa2b23..1f64b70260fe 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -25,7 +25,7 @@ div1_mclk: divclk1 {
 			pinctrl-names = "default";
 			clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
 			#clock-cells = <0>;
-			enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>;
+			enable-gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -65,7 +65,7 @@ cam_vio_vreg: cam-vio-vreg {
 		regulator-name = "cam_vio_vreg";
 		startup-delay-us = <0>;
 		enable-active-high;
-		gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>;
+		gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cam_vio_default>;
 		vin-supply = <&vreg_lvs1a_1p8>;
@@ -103,7 +103,7 @@ gpio-keys {
 			    <&cam_snapshot_pin_a>;
 		button-vol-down {
 			label = "Volume Down";
-			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_VOLUMEDOWN>;
 			gpio-key,wakeup;
@@ -112,7 +112,7 @@ button-vol-down {
 
 		button-camera-snapshot {
 			label = "Camera Snapshot";
-			gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_CAMERA>;
 			debounce-interval = <15>;
@@ -120,7 +120,7 @@ button-camera-snapshot {
 
 		button-camera-focus {
 			label = "Camera Focus";
-			gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
 			linux,code = <KEY_CAMERA_FOCUS>;
 			debounce-interval = <15>;
@@ -187,7 +187,7 @@ ramoops@ffc00000 {
 
 	vibrator {
 		compatible = "gpio-vibrator";
-		enable-gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vib_default>;
 	};
@@ -303,7 +303,7 @@ pm8005_s1: s1 {
 	};
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	vol_down_pin_a: vol-down-active-state {
 		pins = "gpio5";
 		function = PMIC_GPIO_FUNC_NORMAL;
@@ -335,7 +335,7 @@ audio_mclk_pin: audio-mclk-pin-active-state {
 	};
 };
 
-&pmi8998_gpio {
+&pmi8998_gpios {
 	cam_vio_default: cam-vio-active-state {
 		pins = "gpio1";
 		function = PMIC_GPIO_FUNC_NORMAL;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
index b1aac7311ef9..7956b151c7a4 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
@@ -133,7 +133,7 @@ gpio-keys {
 
 		key-vol-up {
 			label = "Volume up";
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			debounce-interval = <15>;
 			wakeup-source;
@@ -278,7 +278,7 @@ pm8005_s1: s1 { /* VDD_GFX supply */
 	};
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	vol_up_key_default: vol-up-key-default-state {
 		pins = "gpio6";
 		function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/pm6125.dtsi b/arch/arm64/boot/dts/qcom/pm6125.dtsi
index 1c8ccda26ffb..59092a551a16 100644
--- a/arch/arm64/boot/dts/qcom/pm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6125.dtsi
@@ -136,11 +136,11 @@ pm6125_rtc: rtc@6000 {
 			status = "disabled";
 		};
 
-		pm6125_gpio: gpio@c000 {
+		pm6125_gpios: gpio@c000 {
 			compatible = "qcom,pm6125-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pm6125_gpio 0 0 9>;
+			gpio-ranges = <&pm6125_gpios 0 0 9>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
index 3d91fb405ca2..2e6afa296141 100644
--- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -88,11 +88,11 @@ pm6150_adc_tm: adc-tm@3500 {
 			status = "disabled";
 		};
 
-		pm6150_gpio: gpio@c000 {
+		pm6150_gpios: gpio@c000 {
 			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pm6150_gpio 0 0 10>;
+			gpio-ranges = <&pm6150_gpios 0 0 10>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
index 90aac61ad264..2479625ed08a 100644
--- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -95,11 +95,11 @@ pm6150l_adc_tm: adc-tm@3500 {
 			status = "disabled";
 		};
 
-		pm6150l_gpio: gpio@c000 {
+		pm6150l_gpios: gpio@c000 {
 			compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pm6150l_gpio 0 0 12>;
+			gpio-ranges = <&pm6150l_gpios 0 0 12>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
index 8d4b081b4e9d..0f0ab2da8305 100644
--- a/arch/arm64/boot/dts/qcom/pm8005.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
@@ -11,11 +11,11 @@ pm8005_lsid0: pmic@4 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pm8005_gpio: gpio@c000 {
+		pm8005_gpios: gpio@c000 {
 			compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pm8005_gpio 0 0 4>;
+			gpio-ranges = <&pm8005_gpios 0 0 4>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi
index 07c3896bd36f..631761f98999 100644
--- a/arch/arm64/boot/dts/qcom/pm8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi
@@ -141,11 +141,11 @@ pm8950_mpps: mpps@a000 {
 			#interrupt-cells = <2>;
 		};
 
-		pm8950_gpio: gpio@c000 {
+		pm8950_gpios: gpio@c000 {
 			compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pm8950_gpio 0 0 8>;
+			gpio-ranges = <&pm8950_gpios 0 0 8>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index 6a5854333b2b..adbba9f4089a 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -109,11 +109,11 @@ rtc@6000 {
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pm8998_gpio: gpio@c000 {
+		pm8998_gpios: gpio@c000 {
 			compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pm8998_gpio 0 0 26>;
+			gpio-ranges = <&pm8998_gpios 0 0 26>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
index 8008f02434a9..4891be3cd68a 100644
--- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
@@ -67,11 +67,11 @@ pmi8950_mpps: mpps@a000 {
 			#interrupt-cells = <2>;
 		};
 
-		pmi8950_gpio: gpio@c000 {
+		pmi8950_gpios: gpio@c000 {
 			compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pmi8950_gpio 0 0 2>;
+			gpio-ranges = <&pmi8950_gpios 0 0 2>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index cd1caeae8281..ffe587f281d8 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -9,11 +9,11 @@ pmi8998_lsid0: pmic@2 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pmi8998_gpio: gpio@c000 {
+		pmi8998_gpios: gpio@c000 {
 			compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pmi8998_gpio 0 0 14>;
+			gpio-ranges = <&pmi8998_gpios 0 0 14>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 70fd9ff8dfa2..7c2ff02eb869 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -304,7 +304,7 @@ panel@0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&disp_pins>;
 
-		reset-gpios = <&pm6150l_gpio 3 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>;
 
 		ports {
 			#address-cells = <1>;
@@ -467,7 +467,7 @@ wifi-firmware {
 
 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
 
-&pm6150l_gpio {
+&pm6150l_gpios {
 	disp_pins: disp-state {
 		pinconf {
 			pins = "gpio3";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index f1defb94d670..b82956f8f1cf 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -1141,11 +1141,11 @@ &sec_mi2s_active {
 
 /* PINCTRL - board-specific pinctrl */
 
-&pm6150_gpio {
+&pm6150_gpios {
 	status = "disabled"; /* No GPIOs are connected */
 };
 
-&pm6150l_gpio {
+&pm6150l_gpios {
 	gpio-line-names = "AP_SUSPEND",
 			  "",
 			  "",
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index ca676e04687b..ab9bf5282910 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -1096,7 +1096,7 @@ pinconf-rx {
 };
 
 /* PINCTRL - board-specific pinctrl */
-&pm8005_gpio {
+&pm8005_gpios {
 	gpio-line-names = "",
 			  "",
 			  "SLB",
@@ -1130,7 +1130,7 @@ adc-chan@51 {
 	};
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	gpio-line-names = "",
 			  "",
 			  "SW_CTRL",
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index f41c6d600ea8..7c3efe3cbf5b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -54,7 +54,7 @@ gpio-keys {
 		key-vol-up {
 			label = "Volume Up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -65,7 +65,7 @@ led-0 {
 			label = "green:user4";
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>;
+			gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "panic-indicator";
 			default-state = "off";
 		};
@@ -74,7 +74,7 @@ led-1 {
 			label = "yellow:wlan";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_YELLOW>;
-			gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>;
+			gpios = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tx";
 			default-state = "off";
 		};
@@ -83,7 +83,7 @@ led-2 {
 			label = "blue:bt";
 			function = LED_FUNCTION_BLUETOOTH;
 			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>;
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "bluetooth-power";
 			default-state = "off";
 		};
@@ -148,7 +148,7 @@ cam0_dvdd_1v2: reg_cam0_dvdd_1v2 {
 		regulator-min-microvolt = <1200000>;
 		regulator-max-microvolt = <1200000>;
 		enable-active-high;
-		gpio = <&pm8998_gpio 12 GPIO_ACTIVE_HIGH>;
+		gpio = <&pm8998_gpios 12 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cam0_dvdd_1v2_en_default>;
 		vin-supply = <&vbat>;
@@ -160,7 +160,7 @@ cam0_avdd_2v8: reg_cam0_avdd_2v8 {
 		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <2800000>;
 		enable-active-high;
-		gpio = <&pm8998_gpio 10 GPIO_ACTIVE_HIGH>;
+		gpio = <&pm8998_gpios 10 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cam0_avdd_2v8_en_default>;
 		vin-supply = <&vbat>;
@@ -559,7 +559,7 @@ &pcie1_phy {
 	vdda-pll-supply = <&vreg_l26a_1p2>;
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	gpio-line-names =
 		"NC",
 		"NC",
@@ -1170,7 +1170,7 @@ pinconf-rx {
 	};
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 1eb423e4be24..f54d3302fb8a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -132,7 +132,7 @@ gpio-keys {
 		key-vol-up {
 			label = "Volume up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -603,7 +603,7 @@ pinconf {
 	};
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	vol_up_pin_a: vol-up-active-state {
 		pins = "gpio6";
 		function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 42cf4dd5ea28..f5751f3244cb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -37,14 +37,14 @@ gpio-keys {
 		key-vol-down {
 			label = "Volume down";
 			linux,code = <KEY_VOLUMEDOWN>;
-			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 		};
 
 		key-vol-up {
 			label = "Volume up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 		};
 	};
@@ -440,7 +440,7 @@ &mss_pil {
 	firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	volume_down_gpio: pm8998-gpio5-state {
 		pinconf {
 			pins = "gpio5";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index bb77ccfdc68c..1934662c2bde 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -54,7 +54,7 @@ gpio-keys {
 		key-vol-up {
 			label = "volume_up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 		};
 	};
@@ -510,7 +510,7 @@ &mss_pil {
 	firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn";
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	volume_up_gpio: pm8998-gpio6-state {
 		pinconf {
 			pins = "gpio6";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index 87dd0fc36747..df92e8d7bf30 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -21,7 +21,7 @@ gpio-keys {
 
 		key-vol-down {
 			label = "volume_down";
-			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 			debounce-interval = <15>;
 			gpio-key,wakeup;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index eb6b2b676eca..ba5a37cb3c9e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -46,7 +46,7 @@ gpio-keys {
 		key-vol-up {
 			label = "Volume Up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -304,7 +304,7 @@ &ipa {
 	firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn";
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	vol_up_pin_a: vol-up-active-state {
 		pins = "gpio6";
 		function = "normal";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index 38ba809a95cd..46346f7146ed 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -55,7 +55,7 @@ gpio-keys {
 		key-vol-up {
 			label = "Volume Up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 			debounce-interval = <15>;
 		};
 	};
@@ -518,7 +518,7 @@ &pmi8998_wled {
 	status = "okay";
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	volume_up_gpio: pm8998-gpio6-state {
 		pinconf {
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 0de6c5b7f742..650819c028b6 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -217,7 +217,7 @@ rf-pa1-therm@3 {
 	};
 };
 
-&pm6125_gpio {
+&pm6125_gpios {
 	camera_flash_therm: camera-flash-therm-state {
 		pins = "gpio3";
 		function = PMIC_GPIO_FUNC_NORMAL;
-- 
2.38.1