From: Rongwei Liu <rongweil@nvidia.com>
To: <matan@nvidia.com>, <viacheslavo@nvidia.com>, <orika@nvidia.com>,
<thomas@monjalon.net>
Cc: <dev@dpdk.org>, <rasland@nvidia.com>
Subject: [RFC 3/9] net/mlx5: adopt new flex item definition
Date: Wed, 21 Dec 2022 10:42:58 +0200 [thread overview]
Message-ID: <20221221084304.3680690-4-rongweil@nvidia.com> (raw)
In-Reply-To: <20221221084304.3680690-1-rongweil@nvidia.com>
Per newest PRM definition, sample_id stands for 3 parts
of information instead of single uint32_t id: sample_id +
modify_filed_id + formate_select_dw.
Also new FW capability bits have been introduces to identify
the new capability.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
---
drivers/common/mlx5/mlx5_devx_cmds.c | 13 +++++++++++--
drivers/common/mlx5/mlx5_devx_cmds.h | 7 ++++++-
drivers/common/mlx5/mlx5_prm.h | 22 ++++++++++++++++++++--
drivers/net/mlx5/mlx5.c | 15 +++++++++++----
drivers/net/mlx5/mlx5.h | 3 ++-
drivers/net/mlx5/mlx5_flow_flex.c | 14 +++++++++++---
6 files changed, 61 insertions(+), 13 deletions(-)
diff --git a/drivers/common/mlx5/mlx5_devx_cmds.c b/drivers/common/mlx5/mlx5_devx_cmds.c
index 59cebb530f..ccd03e2a94 100644
--- a/drivers/common/mlx5/mlx5_devx_cmds.c
+++ b/drivers/common/mlx5/mlx5_devx_cmds.c
@@ -607,7 +607,8 @@ mlx5_devx_cmd_query_hca_vdpa_attr(void *ctx,
int
mlx5_devx_cmd_query_parse_samples(struct mlx5_devx_obj *flex_obj,
- uint32_t ids[], uint32_t num)
+ struct mlx5_ext_sample_id ids[],
+ uint32_t num, uint8_t *anchor)
{
uint32_t in[MLX5_ST_SZ_DW(general_obj_in_cmd_hdr)] = {0};
uint32_t out[MLX5_ST_SZ_DW(create_flex_parser_out)] = {0};
@@ -636,6 +637,7 @@ mlx5_devx_cmd_query_parse_samples(struct mlx5_devx_obj *flex_obj,
(void *)flex_obj);
return -rte_errno;
}
+ *anchor = MLX5_GET(parse_graph_flex, flex, head_anchor_id);
for (i = 0; i < MLX5_GRAPH_NODE_SAMPLE_NUM; i++) {
void *s_off = (void *)((char *)sample + i *
MLX5_ST_SZ_BYTES(parse_graph_flow_match_sample));
@@ -645,8 +647,9 @@ mlx5_devx_cmd_query_parse_samples(struct mlx5_devx_obj *flex_obj,
flow_match_sample_en);
if (!en)
continue;
- ids[idx++] = MLX5_GET(parse_graph_flow_match_sample, s_off,
+ ids[idx++].id = MLX5_GET(parse_graph_flow_match_sample, s_off,
flow_match_sample_field_id);
+ printf("id index %d val %x\n", idx - 1, ids[idx-1].id);
}
if (num != idx) {
rte_errno = EINVAL;
@@ -794,6 +797,12 @@ mlx5_devx_cmd_query_hca_parse_graph_node_cap
max_num_arc_out);
attr->max_num_sample = MLX5_GET(parse_graph_node_cap, hcattr,
max_num_sample);
+ attr->anchor_en = MLX5_GET(parse_graph_node_cap, hcattr, anchor_en);
+ attr->ext_sample_id = MLX5_GET(parse_graph_node_cap, hcattr, ext_sample_id);
+ attr->sample_tunnel_inner2 = MLX5_GET(parse_graph_node_cap, hcattr,
+ sample_tunnel_inner2);
+ attr->zero_size_supported = MLX5_GET(parse_graph_node_cap, hcattr,
+ zero_size_supported);
attr->sample_id_in_out = MLX5_GET(parse_graph_node_cap, hcattr,
sample_id_in_out);
attr->max_base_header_length = MLX5_GET(parse_graph_node_cap, hcattr,
diff --git a/drivers/common/mlx5/mlx5_devx_cmds.h b/drivers/common/mlx5/mlx5_devx_cmds.h
index c94b9eac06..5b33010155 100644
--- a/drivers/common/mlx5/mlx5_devx_cmds.h
+++ b/drivers/common/mlx5/mlx5_devx_cmds.h
@@ -114,6 +114,10 @@ struct mlx5_hca_flex_attr {
uint8_t max_num_arc_out;
uint8_t max_num_sample;
uint8_t max_num_prog_sample:5; /* From HCA CAP 2 */
+ uint8_t anchor_en:1;
+ uint8_t ext_sample_id:1;
+ uint8_t sample_tunnel_inner2:1;
+ uint8_t zero_size_supported:1;
uint8_t sample_id_in_out:1;
uint16_t max_base_header_length;
uint8_t max_sample_base_offset;
@@ -706,7 +710,8 @@ int mlx5_devx_cmd_modify_tir(struct mlx5_devx_obj *tir,
struct mlx5_devx_modify_tir_attr *tir_attr);
__rte_internal
int mlx5_devx_cmd_query_parse_samples(struct mlx5_devx_obj *flex_obj,
- uint32_t ids[], uint32_t num);
+ struct mlx5_ext_sample_id ids[],
+ uint32_t num, uint8_t *anchor);
__rte_internal
struct mlx5_devx_obj *
diff --git a/drivers/common/mlx5/mlx5_prm.h b/drivers/common/mlx5/mlx5_prm.h
index 2b5c43ee6e..1545b929b6 100644
--- a/drivers/common/mlx5/mlx5_prm.h
+++ b/drivers/common/mlx5/mlx5_prm.h
@@ -1890,7 +1890,11 @@ struct mlx5_ifc_parse_graph_node_cap_bits {
u8 max_num_arc_in[0x08];
u8 max_num_arc_out[0x08];
u8 max_num_sample[0x08];
- u8 reserved_at_78[0x07];
+ u8 reserved_at_78[0x03];
+ u8 anchor_en[0x1];
+ u8 ext_sample_id[0x1];
+ u8 sample_tunnel_inner2[0x1];
+ u8 zero_size_supported[0x1];
u8 sample_id_in_out[0x1];
u8 max_base_header_length[0x10];
u8 reserved_at_90[0x08];
@@ -1900,6 +1904,18 @@ struct mlx5_ifc_parse_graph_node_cap_bits {
u8 header_length_mask_width[0x08];
};
+/* ext_sample_id structure, see PRM Table 539. */
+struct mlx5_ext_sample_id {
+ union {
+ struct {
+ uint32_t format_select_dw:8;
+ uint32_t modify_field_id:12;
+ uint32_t sample_id:12;
+ };
+ uint32_t id;
+ };
+};
+
struct mlx5_ifc_flow_table_prop_layout_bits {
u8 ft_support[0x1];
u8 flow_tag[0x1];
@@ -4455,7 +4471,9 @@ struct mlx5_ifc_parse_graph_flex_bits {
u8 header_length_mode[0x4];
u8 header_length_field_offset[0x10];
u8 next_header_field_offset[0x10];
- u8 reserved_at_160[0x1b];
+ u8 reserved_at_160[0x12];
+ u8 head_anchor_id[0x6];
+ u8 reserved_at_178[0x3];
u8 next_header_field_size[0x5];
u8 header_length_field_mask[0x20];
u8 reserved_at_224[0x20];
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index e55be8720e..04b641aa75 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -964,11 +964,13 @@ int
mlx5_flex_parser_ecpri_alloc(struct rte_eth_dev *dev)
{
struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_hca_flex_attr *attr = &priv->sh->cdev->config.hca_attr.flex;
struct mlx5_ecpri_parser_profile *prf = &priv->sh->ecpri_parser;
struct mlx5_devx_graph_node_attr node = {
.modify_field_select = 0,
};
- uint32_t ids[8];
+ struct mlx5_ext_sample_id ids[8];
+ uint8_t anchor_id;
int ret;
if (!priv->sh->cdev->config.hca_attr.parse_graph_flex_node) {
@@ -1004,15 +1006,20 @@ mlx5_flex_parser_ecpri_alloc(struct rte_eth_dev *dev)
return (rte_errno == 0) ? -ENODEV : -rte_errno;
}
prf->num = 2;
- ret = mlx5_devx_cmd_query_parse_samples(prf->obj, ids, prf->num);
+ ret = mlx5_devx_cmd_query_parse_samples(prf->obj, ids, prf->num, &anchor_id);
if (ret) {
DRV_LOG(ERR, "Failed to query sample IDs.");
return (rte_errno == 0) ? -ENODEV : -rte_errno;
}
prf->offset[0] = 0x0;
prf->offset[1] = sizeof(uint32_t);
- prf->ids[0] = ids[0];
- prf->ids[1] = ids[1];
+ if (attr->ext_sample_id) {
+ prf->ids[0] = ids[0].sample_id;
+ prf->ids[1] = ids[1].sample_id;
+ } else {
+ prf->ids[0] = ids[0].id;
+ prf->ids[1] = ids[1].id;
+ }
return 0;
}
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 31982002ee..1c11b77ac3 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -1307,9 +1307,10 @@ struct mlx5_lag {
struct mlx5_flex_parser_devx {
struct mlx5_list_entry entry; /* List element at the beginning. */
uint32_t num_samples;
+ uint8_t anchor_id;
void *devx_obj;
struct mlx5_devx_graph_node_attr devx_conf;
- uint32_t sample_ids[MLX5_GRAPH_NODE_SAMPLE_NUM];
+ struct mlx5_ext_sample_id sample_ids[MLX5_GRAPH_NODE_SAMPLE_NUM];
};
/* Pattern field descriptor - how to translate flex pattern into samples. */
diff --git a/drivers/net/mlx5/mlx5_flow_flex.c b/drivers/net/mlx5/mlx5_flow_flex.c
index fb08910ddb..35f2a9923d 100644
--- a/drivers/net/mlx5/mlx5_flow_flex.c
+++ b/drivers/net/mlx5/mlx5_flow_flex.c
@@ -226,15 +226,18 @@ mlx5_flex_flow_translate_item(struct rte_eth_dev *dev,
void *misc4_m = MLX5_ADDR_OF(fte_match_param, matcher,
misc_parameters_4);
void *misc4_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_4);
+ struct mlx5_priv *priv = dev->data->dev_private;
+ struct mlx5_hca_flex_attr *attr = &priv->sh->cdev->config.hca_attr.flex;
struct mlx5_flex_item *tp;
uint32_t i, pos = 0;
+ uint32_t sample_id;
RTE_SET_USED(dev);
MLX5_ASSERT(item->spec && item->mask);
spec = item->spec;
mask = item->mask;
tp = (struct mlx5_flex_item *)spec->handle;
- MLX5_ASSERT(mlx5_flex_index(dev->data->dev_private, tp) >= 0);
+ MLX5_ASSERT(mlx5_flex_index(priv, tp) >= 0);
for (i = 0; i < tp->mapnum; i++) {
struct mlx5_flex_pattern_field *map = tp->map + i;
uint32_t id = map->reg_id;
@@ -257,9 +260,13 @@ mlx5_flex_flow_translate_item(struct rte_eth_dev *dev,
MLX5_ASSERT(id < num_samples);
id += num_samples;
}
+ if (attr->ext_sample_id)
+ sample_id = tp->devx_fp->sample_ids[id].sample_id;
+ else
+ sample_id = tp->devx_fp->sample_ids[id].id;
mlx5_flex_set_match_sample(misc4_m, misc4_v,
def, msk & def, val & msk & def,
- tp->devx_fp->sample_ids[id], id);
+ sample_id, id);
pos += map->width;
}
}
@@ -1298,7 +1305,8 @@ mlx5_flex_parser_create_cb(void *list_ctx, void *ctx)
/* Query the firmware assigned sample ids. */
ret = mlx5_devx_cmd_query_parse_samples(fp->devx_obj,
fp->sample_ids,
- fp->num_samples);
+ fp->num_samples,
+ &fp->anchor_id);
if (ret)
goto error;
DRV_LOG(DEBUG, "DEVx flex parser %p created, samples num: %u",
--
2.27.0
next prev parent reply other threads:[~2022-12-21 8:43 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-21 8:42 [RFC 0/9] support ipv6 routing header matching Rongwei Liu
2022-12-21 8:42 ` [RFC 1/9] ethdev: add IPv6 routing extension header definition Rongwei Liu
2023-01-16 16:15 ` Ori Kam
2023-01-17 2:50 ` Rongwei Liu
2023-01-19 3:11 ` [PATCH v2 0/8] add IPv6 routing extension support Rongwei Liu
2023-01-19 3:11 ` [PATCH v2 1/8] ethdev: add IPv6 routing extension header definition Rongwei Liu
2023-01-20 9:20 ` Andrew Rybchenko
2023-01-30 3:46 ` Rongwei Liu
2023-01-30 3:59 ` [PATCH v3 0/8] add IPv6 routing extension support Rongwei Liu
2023-01-30 3:59 ` [PATCH v3 1/8] ethdev: add IPv6 routing extension header definition Rongwei Liu
2023-01-30 16:47 ` Stephen Hemminger
2023-01-31 2:03 ` Rongwei Liu
2023-01-31 2:27 ` Rongwei Liu
2023-01-31 2:55 ` Stephen Hemminger
2023-01-31 3:20 ` Rongwei Liu
2023-01-30 16:50 ` Stephen Hemminger
2023-01-31 2:05 ` Rongwei Liu
2023-01-31 3:02 ` Stephen Hemminger
2023-01-31 3:24 ` Rongwei Liu
2023-01-31 9:18 ` Rongwei Liu
2023-01-31 9:42 ` Thomas Monjalon
2023-01-31 11:42 ` Ori Kam
2023-01-31 9:36 ` [PATCH v4 0/3] add IPv6 routing extension support Rongwei Liu
2023-01-31 9:36 ` [PATCH v4 1/3] ethdev: add IPv6 routing extension header definition Rongwei Liu
2023-02-01 9:21 ` Andrew Rybchenko
2023-02-01 9:27 ` Rongwei Liu
2023-02-01 9:31 ` Andrew Rybchenko
2023-02-01 11:35 ` [PATCH v5 0/3] add IPv6 routing extension support Rongwei Liu
2023-02-01 11:35 ` [PATCH v5 1/3] ethdev: add IPv6 routing extension header definition Rongwei Liu
2023-02-01 11:39 ` Andrew Rybchenko
2023-02-01 13:44 ` Thomas Monjalon
2023-02-02 10:00 ` [PATCH v6 0/3] add IPv6 routing extension support Rongwei Liu
2023-02-02 10:00 ` [PATCH v6 1/3] ethdev: add IPv6 routing extension header definition Rongwei Liu
2023-02-02 10:00 ` [PATCH v6 2/3] ethdev: add modify IPv6 protocol field Rongwei Liu
2023-02-02 10:00 ` [PATCH v6 3/3] app/testpmd: add IPv6 routing extension header in raw encap Rongwei Liu
2023-02-03 18:36 ` [PATCH v6 0/3] add IPv6 routing extension support Ferruh Yigit
2023-02-01 11:35 ` [PATCH v5 2/3] ethdev: add modify IPv6 protocol field Rongwei Liu
2023-02-01 11:39 ` Andrew Rybchenko
2023-02-01 16:55 ` Stephen Hemminger
2023-02-02 2:12 ` Rongwei Liu
2023-02-01 11:35 ` [PATCH v5 3/3] app/testpmd: add IPv6 routing extension header in raw encap Rongwei Liu
2023-01-31 9:36 ` [PATCH v4 2/3] ethdev: add modify IPv6 protocol field Rongwei Liu
2023-02-01 9:14 ` Andrew Rybchenko
2023-01-31 9:36 ` [PATCH v4 3/3] app/testpmd: add IPv6 routing extension header in raw encap Rongwei Liu
2023-01-30 3:59 ` [PATCH v3 2/8] net/mlx5: adopt IPv6 routing extension prm definition Rongwei Liu
2023-01-30 3:59 ` [PATCH v3 3/8] net/mlx5/hws: Definer, add mlx5dr context to definer_conv_data Rongwei Liu
2023-01-30 3:59 ` [PATCH v3 4/8] net/mlx5/hws: add IPv6 routing extension matching support Rongwei Liu
2023-01-30 3:59 ` [PATCH v3 5/8] app/testpmd: add IPv6 routing extension header in raw encap Rongwei Liu
2023-01-30 3:59 ` [PATCH v3 6/8] ethdev: add modify IPv6 protocol field Rongwei Liu
2023-01-30 3:59 ` [PATCH v3 7/8] net/mlx5: add modify IPv6 protocol implementation Rongwei Liu
2023-01-30 3:59 ` [PATCH v3 8/8] doc/mlx5: add IPv6 routing extension matching docs Rongwei Liu
2023-01-19 3:11 ` [PATCH v2 2/8] net/mlx5: adopt IPv6 routing extension prm definition Rongwei Liu
2023-01-19 3:11 ` [PATCH v2 3/8] net/mlx5/hws: Definer, add mlx5dr context to definer_conv_data Rongwei Liu
2023-01-19 3:11 ` [PATCH v2 4/8] net/mlx5/hws: add IPv6 routing extension matching support Rongwei Liu
2023-01-19 3:11 ` [PATCH v2 5/8] app/testpmd: add IPv6 routing extension header in raw encap Rongwei Liu
2023-01-19 3:11 ` [PATCH v2 6/8] ethdev: add modify IPv6 protocol field Rongwei Liu
2023-01-19 3:11 ` [PATCH v2 7/8] net/mlx5: add modify IPv6 protocol implementation Rongwei Liu
2023-01-19 3:11 ` [PATCH v2 8/8] doc/mlx5: add IPv6 routing extension matching docs Rongwei Liu
2022-12-21 8:42 ` [RFC 2/9] app/testpmd: add IPv6 routing extension header support Rongwei Liu
2022-12-21 8:42 ` Rongwei Liu [this message]
2022-12-21 8:42 ` [RFC 4/9] net/mlx5/hws: Definer, add mlx5dr context to definer_conv_data Rongwei Liu
2022-12-21 8:43 ` [RFC 5/9] net/mlx5/hws: add IPv6 routing extension matching support Rongwei Liu
2022-12-21 8:43 ` [RFC 6/9] app/testpmd: add IPv6 routing extension header in raw encap Rongwei Liu
2022-12-21 8:43 ` [RFC 7/9] ethdev: add modify IPv6 protocol field Rongwei Liu
2023-01-16 16:20 ` Ori Kam
2022-12-21 8:43 ` [RFC 8/9] app/testpmd: add modify IPv6 protocol command line Rongwei Liu
2022-12-21 8:43 ` [RFC 9/9] net/mlx5/hws: add modify IPv6 protocol implementation Rongwei Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221221084304.3680690-4-rongweil@nvidia.com \
--to=rongweil@nvidia.com \
--cc=dev@dpdk.org \
--cc=matan@nvidia.com \
--cc=orika@nvidia.com \
--cc=rasland@nvidia.com \
--cc=thomas@monjalon.net \
--cc=viacheslavo@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.