From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Alan Stern <stern@rowland.harvard.edu>,
"Artem S . Tashkinov" <aros@gmx.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Sasha Levin <sashal@kernel.org>,
linux-usb@vger.kernel.org
Subject: [PATCH AUTOSEL 6.1 09/26] USB: core: Change configuration warnings to notices
Date: Fri, 23 Dec 2022 20:29:13 -0500 [thread overview]
Message-ID: <20221224012930.392358-9-sashal@kernel.org> (raw)
In-Reply-To: <20221224012930.392358-1-sashal@kernel.org>
From: Alan Stern <stern@rowland.harvard.edu>
[ Upstream commit 7a09c1269702db8eccb6f718da2b00173e1e0034 ]
It has been pointed out that the kernel log messages warning about
problems in USB configuration and related descriptors are vexing for
users. The warning log level has a fairly high priority, but the user
can do nothing to fix the underlying errors in the device's firmware.
To reduce the amount of useless information produced by tools that
filter high-priority log messages, we can change these warnings to
notices, i.e., change dev_warn() to dev_notice(). The same holds for
a few messages that currently use dev_err(): Unless they indicate a
failure that might make a device unusable (such as inability to
transfer a config descriptor), change them to dev_notice() also.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216630
Suggested-by: Artem S. Tashkinov <aros@gmx.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Y2KzPx0h6z1jXCuN@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/core/config.c | 82 +++++++++++++++++++--------------------
1 file changed, 41 insertions(+), 41 deletions(-)
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 48bc8a4814ac..725b8dbcfe5f 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -61,7 +61,7 @@ static void usb_parse_ssp_isoc_endpoint_companion(struct device *ddev,
desc = (struct usb_ssp_isoc_ep_comp_descriptor *) buffer;
if (desc->bDescriptorType != USB_DT_SSP_ISOC_ENDPOINT_COMP ||
size < USB_DT_SSP_ISOC_EP_COMP_SIZE) {
- dev_warn(ddev, "Invalid SuperSpeedPlus isoc endpoint companion"
+ dev_notice(ddev, "Invalid SuperSpeedPlus isoc endpoint companion"
"for config %d interface %d altsetting %d ep %d.\n",
cfgno, inum, asnum, ep->desc.bEndpointAddress);
return;
@@ -83,7 +83,7 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP ||
size < USB_DT_SS_EP_COMP_SIZE) {
- dev_warn(ddev, "No SuperSpeed endpoint companion for config %d "
+ dev_notice(ddev, "No SuperSpeed endpoint companion for config %d "
" interface %d altsetting %d ep %d: "
"using minimum values\n",
cfgno, inum, asnum, ep->desc.bEndpointAddress);
@@ -109,13 +109,13 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
/* Check the various values */
if (usb_endpoint_xfer_control(&ep->desc) && desc->bMaxBurst != 0) {
- dev_warn(ddev, "Control endpoint with bMaxBurst = %d in "
+ dev_notice(ddev, "Control endpoint with bMaxBurst = %d in "
"config %d interface %d altsetting %d ep %d: "
"setting to zero\n", desc->bMaxBurst,
cfgno, inum, asnum, ep->desc.bEndpointAddress);
ep->ss_ep_comp.bMaxBurst = 0;
} else if (desc->bMaxBurst > 15) {
- dev_warn(ddev, "Endpoint with bMaxBurst = %d in "
+ dev_notice(ddev, "Endpoint with bMaxBurst = %d in "
"config %d interface %d altsetting %d ep %d: "
"setting to 15\n", desc->bMaxBurst,
cfgno, inum, asnum, ep->desc.bEndpointAddress);
@@ -125,7 +125,7 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
if ((usb_endpoint_xfer_control(&ep->desc) ||
usb_endpoint_xfer_int(&ep->desc)) &&
desc->bmAttributes != 0) {
- dev_warn(ddev, "%s endpoint with bmAttributes = %d in "
+ dev_notice(ddev, "%s endpoint with bmAttributes = %d in "
"config %d interface %d altsetting %d ep %d: "
"setting to zero\n",
usb_endpoint_xfer_control(&ep->desc) ? "Control" : "Bulk",
@@ -134,7 +134,7 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
ep->ss_ep_comp.bmAttributes = 0;
} else if (usb_endpoint_xfer_bulk(&ep->desc) &&
desc->bmAttributes > 16) {
- dev_warn(ddev, "Bulk endpoint with more than 65536 streams in "
+ dev_notice(ddev, "Bulk endpoint with more than 65536 streams in "
"config %d interface %d altsetting %d ep %d: "
"setting to max\n",
cfgno, inum, asnum, ep->desc.bEndpointAddress);
@@ -142,7 +142,7 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
} else if (usb_endpoint_xfer_isoc(&ep->desc) &&
!USB_SS_SSP_ISOC_COMP(desc->bmAttributes) &&
USB_SS_MULT(desc->bmAttributes) > 3) {
- dev_warn(ddev, "Isoc endpoint has Mult of %d in "
+ dev_notice(ddev, "Isoc endpoint has Mult of %d in "
"config %d interface %d altsetting %d ep %d: "
"setting to 3\n",
USB_SS_MULT(desc->bmAttributes),
@@ -160,7 +160,7 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
else
max_tx = 999999;
if (le16_to_cpu(desc->wBytesPerInterval) > max_tx) {
- dev_warn(ddev, "%s endpoint with wBytesPerInterval of %d in "
+ dev_notice(ddev, "%s endpoint with wBytesPerInterval of %d in "
"config %d interface %d altsetting %d ep %d: "
"setting to %d\n",
usb_endpoint_xfer_isoc(&ep->desc) ? "Isoc" : "Int",
@@ -273,7 +273,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
else if (d->bLength >= USB_DT_ENDPOINT_SIZE)
n = USB_DT_ENDPOINT_SIZE;
else {
- dev_warn(ddev, "config %d interface %d altsetting %d has an "
+ dev_notice(ddev, "config %d interface %d altsetting %d has an "
"invalid endpoint descriptor of length %d, skipping\n",
cfgno, inum, asnum, d->bLength);
goto skip_to_next_endpoint_or_interface_descriptor;
@@ -281,7 +281,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK;
if (i >= 16 || i == 0) {
- dev_warn(ddev, "config %d interface %d altsetting %d has an "
+ dev_notice(ddev, "config %d interface %d altsetting %d has an "
"invalid endpoint with address 0x%X, skipping\n",
cfgno, inum, asnum, d->bEndpointAddress);
goto skip_to_next_endpoint_or_interface_descriptor;
@@ -293,7 +293,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
/* Check for duplicate endpoint addresses */
if (config_endpoint_is_duplicate(config, inum, asnum, d)) {
- dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
+ dev_notice(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
cfgno, inum, asnum, d->bEndpointAddress);
goto skip_to_next_endpoint_or_interface_descriptor;
}
@@ -301,7 +301,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
/* Ignore some endpoints */
if (udev->quirks & USB_QUIRK_ENDPOINT_IGNORE) {
if (usb_endpoint_is_ignored(udev, ifp, d)) {
- dev_warn(ddev, "config %d interface %d altsetting %d has an ignored endpoint with address 0x%X, skipping\n",
+ dev_notice(ddev, "config %d interface %d altsetting %d has an ignored endpoint with address 0x%X, skipping\n",
cfgno, inum, asnum,
d->bEndpointAddress);
goto skip_to_next_endpoint_or_interface_descriptor;
@@ -378,7 +378,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
}
}
if (d->bInterval < i || d->bInterval > j) {
- dev_warn(ddev, "config %d interface %d altsetting %d "
+ dev_notice(ddev, "config %d interface %d altsetting %d "
"endpoint 0x%X has an invalid bInterval %d, "
"changing to %d\n",
cfgno, inum, asnum,
@@ -391,7 +391,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
* them usable, we will try treating them as Interrupt endpoints.
*/
if (udev->speed == USB_SPEED_LOW && usb_endpoint_xfer_bulk(d)) {
- dev_warn(ddev, "config %d interface %d altsetting %d "
+ dev_notice(ddev, "config %d interface %d altsetting %d "
"endpoint 0x%X is Bulk; changing to Interrupt\n",
cfgno, inum, asnum, d->bEndpointAddress);
endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT;
@@ -408,7 +408,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
*/
maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize);
if (maxp == 0 && !(usb_endpoint_xfer_isoc(d) && asnum == 0)) {
- dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid wMaxPacketSize 0\n",
+ dev_notice(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid wMaxPacketSize 0\n",
cfgno, inum, asnum, d->bEndpointAddress);
}
@@ -439,7 +439,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
j = maxpacket_maxes[usb_endpoint_type(&endpoint->desc)];
if (maxp > j) {
- dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid maxpacket %d, setting to %d\n",
+ dev_notice(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid maxpacket %d, setting to %d\n",
cfgno, inum, asnum, d->bEndpointAddress, maxp, j);
maxp = j;
endpoint->desc.wMaxPacketSize = cpu_to_le16(i | maxp);
@@ -452,7 +452,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
*/
if (udev->speed == USB_SPEED_HIGH && usb_endpoint_xfer_bulk(d)) {
if (maxp != 512)
- dev_warn(ddev, "config %d interface %d altsetting %d "
+ dev_notice(ddev, "config %d interface %d altsetting %d "
"bulk endpoint 0x%X has invalid maxpacket %d\n",
cfgno, inum, asnum, d->bEndpointAddress,
maxp);
@@ -533,7 +533,7 @@ static int usb_parse_interface(struct device *ddev, int cfgno,
i < intfc->num_altsetting;
(++i, ++alt)) {
if (alt->desc.bAlternateSetting == asnum) {
- dev_warn(ddev, "Duplicate descriptor for config %d "
+ dev_notice(ddev, "Duplicate descriptor for config %d "
"interface %d altsetting %d, skipping\n",
cfgno, inum, asnum);
goto skip_to_next_interface_descriptor;
@@ -559,7 +559,7 @@ static int usb_parse_interface(struct device *ddev, int cfgno,
num_ep = num_ep_orig = alt->desc.bNumEndpoints;
alt->desc.bNumEndpoints = 0; /* Use as a counter */
if (num_ep > USB_MAXENDPOINTS) {
- dev_warn(ddev, "too many endpoints for config %d interface %d "
+ dev_notice(ddev, "too many endpoints for config %d interface %d "
"altsetting %d: %d, using maximum allowed: %d\n",
cfgno, inum, asnum, num_ep, USB_MAXENDPOINTS);
num_ep = USB_MAXENDPOINTS;
@@ -590,7 +590,7 @@ static int usb_parse_interface(struct device *ddev, int cfgno,
}
if (n != num_ep_orig)
- dev_warn(ddev, "config %d interface %d altsetting %d has %d "
+ dev_notice(ddev, "config %d interface %d altsetting %d has %d "
"endpoint descriptor%s, different from the interface "
"descriptor's value: %d\n",
cfgno, inum, asnum, n, plural(n), num_ep_orig);
@@ -625,7 +625,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
if (config->desc.bDescriptorType != USB_DT_CONFIG ||
config->desc.bLength < USB_DT_CONFIG_SIZE ||
config->desc.bLength > size) {
- dev_err(ddev, "invalid descriptor for config index %d: "
+ dev_notice(ddev, "invalid descriptor for config index %d: "
"type = 0x%X, length = %d\n", cfgidx,
config->desc.bDescriptorType, config->desc.bLength);
return -EINVAL;
@@ -636,7 +636,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
size -= config->desc.bLength;
if (nintf > USB_MAXINTERFACES) {
- dev_warn(ddev, "config %d has too many interfaces: %d, "
+ dev_notice(ddev, "config %d has too many interfaces: %d, "
"using maximum allowed: %d\n",
cfgno, nintf, USB_MAXINTERFACES);
nintf = USB_MAXINTERFACES;
@@ -650,7 +650,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
(buffer2 += header->bLength, size2 -= header->bLength)) {
if (size2 < sizeof(struct usb_descriptor_header)) {
- dev_warn(ddev, "config %d descriptor has %d excess "
+ dev_notice(ddev, "config %d descriptor has %d excess "
"byte%s, ignoring\n",
cfgno, size2, plural(size2));
break;
@@ -658,7 +658,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
header = (struct usb_descriptor_header *) buffer2;
if ((header->bLength > size2) || (header->bLength < 2)) {
- dev_warn(ddev, "config %d has an invalid descriptor "
+ dev_notice(ddev, "config %d has an invalid descriptor "
"of length %d, skipping remainder of the config\n",
cfgno, header->bLength);
break;
@@ -670,7 +670,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
d = (struct usb_interface_descriptor *) header;
if (d->bLength < USB_DT_INTERFACE_SIZE) {
- dev_warn(ddev, "config %d has an invalid "
+ dev_notice(ddev, "config %d has an invalid "
"interface descriptor of length %d, "
"skipping\n", cfgno, d->bLength);
continue;
@@ -680,7 +680,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
if ((dev->quirks & USB_QUIRK_HONOR_BNUMINTERFACES) &&
n >= nintf_orig) {
- dev_warn(ddev, "config %d has more interface "
+ dev_notice(ddev, "config %d has more interface "
"descriptors, than it declares in "
"bNumInterfaces, ignoring interface "
"number: %d\n", cfgno, inum);
@@ -688,7 +688,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
}
if (inum >= nintf_orig)
- dev_warn(ddev, "config %d has an invalid "
+ dev_notice(ddev, "config %d has an invalid "
"interface number: %d but max is %d\n",
cfgno, inum, nintf_orig - 1);
@@ -713,14 +713,14 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
d = (struct usb_interface_assoc_descriptor *)header;
if (d->bLength < USB_DT_INTERFACE_ASSOCIATION_SIZE) {
- dev_warn(ddev,
+ dev_notice(ddev,
"config %d has an invalid interface association descriptor of length %d, skipping\n",
cfgno, d->bLength);
continue;
}
if (iad_num == USB_MAXIADS) {
- dev_warn(ddev, "found more Interface "
+ dev_notice(ddev, "found more Interface "
"Association Descriptors "
"than allocated for in "
"configuration %d\n", cfgno);
@@ -731,7 +731,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
} else if (header->bDescriptorType == USB_DT_DEVICE ||
header->bDescriptorType == USB_DT_CONFIG)
- dev_warn(ddev, "config %d contains an unexpected "
+ dev_notice(ddev, "config %d contains an unexpected "
"descriptor of type 0x%X, skipping\n",
cfgno, header->bDescriptorType);
@@ -740,11 +740,11 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
config->desc.wTotalLength = cpu_to_le16(buffer2 - buffer0);
if (n != nintf)
- dev_warn(ddev, "config %d has %d interface%s, different from "
+ dev_notice(ddev, "config %d has %d interface%s, different from "
"the descriptor's value: %d\n",
cfgno, n, plural(n), nintf_orig);
else if (n == 0)
- dev_warn(ddev, "config %d has no interfaces?\n", cfgno);
+ dev_notice(ddev, "config %d has no interfaces?\n", cfgno);
config->desc.bNumInterfaces = nintf = n;
/* Check for missing interface numbers */
@@ -754,7 +754,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
break;
}
if (j >= nintf)
- dev_warn(ddev, "config %d has no interface number "
+ dev_notice(ddev, "config %d has no interface number "
"%d\n", cfgno, i);
}
@@ -762,7 +762,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
for (i = 0; i < nintf; ++i) {
j = nalts[i];
if (j > USB_MAXALTSETTING) {
- dev_warn(ddev, "too many alternate settings for "
+ dev_notice(ddev, "too many alternate settings for "
"config %d interface %d: %d, "
"using maximum allowed: %d\n",
cfgno, inums[i], j, USB_MAXALTSETTING);
@@ -811,7 +811,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
break;
}
if (n >= intfc->num_altsetting)
- dev_warn(ddev, "config %d interface %d has no "
+ dev_notice(ddev, "config %d interface %d has no "
"altsetting %d\n", cfgno, inums[i], j);
}
}
@@ -868,7 +868,7 @@ int usb_get_configuration(struct usb_device *dev)
int result;
if (ncfg > USB_MAXCONFIG) {
- dev_warn(ddev, "too many configurations: %d, "
+ dev_notice(ddev, "too many configurations: %d, "
"using maximum allowed: %d\n", ncfg, USB_MAXCONFIG);
dev->descriptor.bNumConfigurations = ncfg = USB_MAXCONFIG;
}
@@ -902,7 +902,7 @@ int usb_get_configuration(struct usb_device *dev)
"descriptor/%s: %d\n", cfgno, "start", result);
if (result != -EPIPE)
goto err;
- dev_err(ddev, "chopping to %d config(s)\n", cfgno);
+ dev_notice(ddev, "chopping to %d config(s)\n", cfgno);
dev->descriptor.bNumConfigurations = cfgno;
break;
} else if (result < 4) {
@@ -934,7 +934,7 @@ int usb_get_configuration(struct usb_device *dev)
goto err;
}
if (result < length) {
- dev_warn(ddev, "config index %d descriptor too short "
+ dev_notice(ddev, "config index %d descriptor too short "
"(expected %i, got %i)\n", cfgno, length, result);
length = result;
}
@@ -993,7 +993,7 @@ int usb_get_bos_descriptor(struct usb_device *dev)
/* Get BOS descriptor */
ret = usb_get_descriptor(dev, USB_DT_BOS, 0, bos, USB_DT_BOS_SIZE);
if (ret < USB_DT_BOS_SIZE || bos->bLength < USB_DT_BOS_SIZE) {
- dev_err(ddev, "unable to get BOS descriptor or descriptor too short\n");
+ dev_notice(ddev, "unable to get BOS descriptor or descriptor too short\n");
if (ret >= 0)
ret = -ENOMSG;
kfree(bos);
@@ -1021,7 +1021,7 @@ int usb_get_bos_descriptor(struct usb_device *dev)
ret = usb_get_descriptor(dev, USB_DT_BOS, 0, buffer, total_len);
if (ret < total_len) {
- dev_err(ddev, "unable to get BOS descriptor set\n");
+ dev_notice(ddev, "unable to get BOS descriptor set\n");
if (ret >= 0)
ret = -ENOMSG;
goto err;
@@ -1046,7 +1046,7 @@ int usb_get_bos_descriptor(struct usb_device *dev)
}
if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) {
- dev_warn(ddev, "descriptor type invalid, skip\n");
+ dev_notice(ddev, "descriptor type invalid, skip\n");
continue;
}
--
2.35.1
next prev parent reply other threads:[~2022-12-24 1:30 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-24 1:29 [PATCH AUTOSEL 6.1 01/26] gpiolib: of: add a quirk for legacy names in Mediatek mt2701-cs42448 Sasha Levin
2022-12-24 1:29 ` Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 02/26] gpiolib: of: consolidate simple renames into a single quirk Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 03/26] gpiolib: of: tighten selection of gpio renaming quirks Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 04/26] gpiolib: of: add quirk for locating reset lines with legacy bindings Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 05/26] gpiolib: of: add a quirk for reset line for Marvell NFC controller Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 06/26] gpiolib: of: add a quirk for reset line for Cirrus CS42L56 codec Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 07/26] gpiolib: of: add a quirk for legacy names in MOXA ART RTC Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 08/26] kset: fix memory leak when kset_register() returns error Sasha Levin
2022-12-24 1:29 ` Sasha Levin [this message]
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 10/26] usb: core: stop USB enumeration if too many retries Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 11/26] usb: gadget: aspeed: fix buffer overflow Sasha Levin
2022-12-24 1:29 ` Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 12/26] usb: gadget: u_ether: Do not make UDC parent of the net device Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 13/26] usb: gadget: f_ecm: Always set current gadget in ecm_bind() Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 14/26] devres: Use kmalloc_size_roundup() to match ksize() usage Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 15/26] chardev: Fix potential memory leak when cdev_add() failed Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 16/26] usb/usbip: Fix v_recv_cmd_submit() to use PIPE_BULK define Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 17/26] char: xillybus: Prevent use-after-free due to race condition Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 18/26] habanalabs: zero ts registration buff when allocated Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 19/26] char: xillybus: Fix trivial bug with mutex Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 20/26] iio: filter: admv8818: close potential out-of-bounds read in __admv8818_read_[h|l]pf_freq() Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 21/26] xhci: disable U3 suspended ports in S4 hibernate poweroff_late stage Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 22/26] ACPICA: Fix operand resolution Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 23/26] ksmbd: Fix resource leak in smb2_lock() Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 24/26] writeback: Add asserts for adding freed inode to lists Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 25/26] exfat: fix overflow in sector and cluster conversion Sasha Levin
2022-12-24 1:29 ` [PATCH AUTOSEL 6.1 26/26] fbdev: smscufx: fix error handling code in ufx_usb_probe Sasha Levin
2022-12-24 1:29 ` Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221224012930.392358-9-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=aros@gmx.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.