[PATCH v3 0/6] crypto: stm32 hash - reuse for Ux500

[PATCH v3 0/6] crypto: stm32 hash - reuse for Ux500

[Linus Walleij]

By taking some small portions of the Ux500 HASH driver and
adding to the STM32 driver, it turns out we can support both
platforms with the more modern STM32 driver.

The STM32 driver is more modern and compact thanks to using
things like the crypto engine.

We add a polled mode since the Ux500 does not have any
interrupt. Incidentally, this could perhaps be re-used to
implement synchronous mode, if this is desireable.

To: Herbert Xu <herbert@gondor.apana.org.au>
To: "David S. Miller" <davem@davemloft.net>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Maxime Coquelin <mcoquelin.stm32@gmail.com>
To: Alexandre Torgue <alexandre.torgue@foss.st.com>
To: Lionel Debieve <lionel.debieve@foss.st.com>
Cc: linux-crypto@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
Changes in v3:
- Allocate the synchronous fallback algorithm in .cra_init()
  and free it in .cra_exit().
- Pick up some review tags.
- Link to v2: https://lore.kernel.org/r/20221227-ux500-stm32-hash-v2-0-bc443bc44ca4@linaro.org

Changes in v2:
- Use an else-clause in the DT bindings.
- Fix up issues pointed out by Lionel in the driver extension.
- Dropped the patch converting dma_mode to a bool after
  Lionel explained how this works.
- Link to v1: https://lore.kernel.org/r/20221227-ux500-stm32-hash-v1-0-b637ac4cda01@linaro.org

---
Linus Walleij (6):
      dt-bindings: crypto: Let STM32 define Ux500 HASH
      crypto: stm32/hash: Simplify code
      crypto: stm32/hash: Use existing busy poll function
      crypto: stm32/hash: Wait for idle before final CPU xmit
      crypto: stm32/hash: Support Ux500 hash
      crypto: ux500/hash - delete driver

 .../devicetree/bindings/crypto/st,stm32-hash.yaml  |   23 +-
 drivers/crypto/Kconfig                             |   10 -
 drivers/crypto/Makefile                            |    1 -
 drivers/crypto/stm32/stm32-hash.c                  |  266 ++-
 drivers/crypto/ux500/Kconfig                       |   22 -
 drivers/crypto/ux500/Makefile                      |    7 -
 drivers/crypto/ux500/hash/Makefile                 |   11 -
 drivers/crypto/ux500/hash/hash_alg.h               |  398 ----
 drivers/crypto/ux500/hash/hash_core.c              | 1966 --------------------
 9 files changed, 249 insertions(+), 2455 deletions(-)
---
base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2
change-id: 20221227-ux500-stm32-hash-9ee26834292f

Best regards,
-- 
Linus Walleij <linus.walleij@linaro.org>

[PATCH v3 0/6] crypto: stm32 hash - reuse for Ux500

[Linus Walleij]

By taking some small portions of the Ux500 HASH driver and
adding to the STM32 driver, it turns out we can support both
platforms with the more modern STM32 driver.

The STM32 driver is more modern and compact thanks to using
things like the crypto engine.

We add a polled mode since the Ux500 does not have any
interrupt. Incidentally, this could perhaps be re-used to
implement synchronous mode, if this is desireable.

To: Herbert Xu <herbert@gondor.apana.org.au>
To: "David S. Miller" <davem@davemloft.net>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
To: Maxime Coquelin <mcoquelin.stm32@gmail.com>
To: Alexandre Torgue <alexandre.torgue@foss.st.com>
To: Lionel Debieve <lionel.debieve@foss.st.com>
Cc: linux-crypto@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
Changes in v3:
- Allocate the synchronous fallback algorithm in .cra_init()
  and free it in .cra_exit().
- Pick up some review tags.
- Link to v2: https://lore.kernel.org/r/20221227-ux500-stm32-hash-v2-0-bc443bc44ca4@linaro.org

Changes in v2:
- Use an else-clause in the DT bindings.
- Fix up issues pointed out by Lionel in the driver extension.
- Dropped the patch converting dma_mode to a bool after
  Lionel explained how this works.
- Link to v1: https://lore.kernel.org/r/20221227-ux500-stm32-hash-v1-0-b637ac4cda01@linaro.org

---
Linus Walleij (6):
      dt-bindings: crypto: Let STM32 define Ux500 HASH
      crypto: stm32/hash: Simplify code
      crypto: stm32/hash: Use existing busy poll function
      crypto: stm32/hash: Wait for idle before final CPU xmit
      crypto: stm32/hash: Support Ux500 hash
      crypto: ux500/hash - delete driver

 .../devicetree/bindings/crypto/st,stm32-hash.yaml  |   23 +-
 drivers/crypto/Kconfig                             |   10 -
 drivers/crypto/Makefile                            |    1 -
 drivers/crypto/stm32/stm32-hash.c                  |  266 ++-
 drivers/crypto/ux500/Kconfig                       |   22 -
 drivers/crypto/ux500/Makefile                      |    7 -
 drivers/crypto/ux500/hash/Makefile                 |   11 -
 drivers/crypto/ux500/hash/hash_alg.h               |  398 ----
 drivers/crypto/ux500/hash/hash_core.c              | 1966 --------------------
 9 files changed, 249 insertions(+), 2455 deletions(-)
---
base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2
change-id: 20221227-ux500-stm32-hash-9ee26834292f

Best regards,
-- 
Linus Walleij <linus.walleij@linaro.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 1/6] dt-bindings: crypto: Let STM32 define Ux500 HASH

[Linus Walleij]

This adds device tree bindings for the Ux500 HASH block
as a compatible in the STM32 HASH bindings.

The Ux500 HASH binding has been used for ages in the kernel
device tree for Ux500 but was never documented, so fill in
the gap by making it a sibling of the STM32 HASH block,
which is what it is.

The relationship to the existing STM32 HASH block is pretty
obvious when looking at the register map, and I have written
patches to reuse the STM32 HASH driver on the Ux500.

The main difference from the outside is that the Ux500 HASH
lacks the interrupt line, so some special if-clauses are
needed to accomodate this in the binding.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Pick up Rob's review tag.
ChangeLog v1->v2:
- Use an else construction instead of if/if not.
---
 .../devicetree/bindings/crypto/st,stm32-hash.yaml  | 23 +++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
index 4ccb335e8063..b767ec72a999 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
@@ -6,12 +6,18 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: STMicroelectronics STM32 HASH
 
+description: The STM32 HASH block is built on the HASH block found in
+  the STn8820 SoC introduced in 2007, and subsequently used in the U8500
+  SoC in 2010.
+
 maintainers:
   - Lionel Debieve <lionel.debieve@foss.st.com>
 
 properties:
   compatible:
     enum:
+      - st,stn8820-hash
+      - stericsson,ux500-hash
       - st,stm32f456-hash
       - st,stm32f756-hash
 
@@ -41,11 +47,26 @@ properties:
     maximum: 2
     default: 0
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
   - clocks
-  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          items:
+            const: stericsson,ux500-hash
+    then:
+      properties:
+        interrupts: false
+    else:
+      required:
+        - interrupts
 
 additionalProperties: false
 

-- 
2.39.0

[PATCH v3 1/6] dt-bindings: crypto: Let STM32 define Ux500 HASH

[Linus Walleij]

This adds device tree bindings for the Ux500 HASH block
as a compatible in the STM32 HASH bindings.

The Ux500 HASH binding has been used for ages in the kernel
device tree for Ux500 but was never documented, so fill in
the gap by making it a sibling of the STM32 HASH block,
which is what it is.

The relationship to the existing STM32 HASH block is pretty
obvious when looking at the register map, and I have written
patches to reuse the STM32 HASH driver on the Ux500.

The main difference from the outside is that the Ux500 HASH
lacks the interrupt line, so some special if-clauses are
needed to accomodate this in the binding.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Pick up Rob's review tag.
ChangeLog v1->v2:
- Use an else construction instead of if/if not.
---
 .../devicetree/bindings/crypto/st,stm32-hash.yaml  | 23 +++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
index 4ccb335e8063..b767ec72a999 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
@@ -6,12 +6,18 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: STMicroelectronics STM32 HASH
 
+description: The STM32 HASH block is built on the HASH block found in
+  the STn8820 SoC introduced in 2007, and subsequently used in the U8500
+  SoC in 2010.
+
 maintainers:
   - Lionel Debieve <lionel.debieve@foss.st.com>
 
 properties:
   compatible:
     enum:
+      - st,stn8820-hash
+      - stericsson,ux500-hash
       - st,stm32f456-hash
       - st,stm32f756-hash
 
@@ -41,11 +47,26 @@ properties:
     maximum: 2
     default: 0
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
   - clocks
-  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          items:
+            const: stericsson,ux500-hash
+    then:
+      properties:
+        interrupts: false
+    else:
+      required:
+        - interrupts
 
 additionalProperties: false
 

-- 
2.39.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/6] crypto: stm32/hash: Simplify code

[Linus Walleij]

We are passing (rctx->flags & HASH_FLAGS_FINUP) as indicator
for the final request but we already know this to be true since
we are in the (final) arm of an if-statement set from the same
flag. Just open-code it as true.

Acked-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- No changes
ChangeLog v1->v2:
- Pick up Lionel's ACK
---
 drivers/crypto/stm32/stm32-hash.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/crypto/stm32/stm32-hash.c b/drivers/crypto/stm32/stm32-hash.c
index d33006d43f76..0473ced7b4ea 100644
--- a/drivers/crypto/stm32/stm32-hash.c
+++ b/drivers/crypto/stm32/stm32-hash.c
@@ -399,8 +399,7 @@ static int stm32_hash_update_cpu(struct stm32_hash_dev *hdev)
 	if (final) {
 		bufcnt = rctx->bufcnt;
 		rctx->bufcnt = 0;
-		err = stm32_hash_xmit_cpu(hdev, rctx->buffer, bufcnt,
-					  (rctx->flags & HASH_FLAGS_FINUP));
+		err = stm32_hash_xmit_cpu(hdev, rctx->buffer, bufcnt, 1);
 	}
 
 	return err;

-- 
2.39.0

[PATCH v3 2/6] crypto: stm32/hash: Simplify code

[Linus Walleij]

We are passing (rctx->flags & HASH_FLAGS_FINUP) as indicator
for the final request but we already know this to be true since
we are in the (final) arm of an if-statement set from the same
flag. Just open-code it as true.

Acked-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- No changes
ChangeLog v1->v2:
- Pick up Lionel's ACK
---
 drivers/crypto/stm32/stm32-hash.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/crypto/stm32/stm32-hash.c b/drivers/crypto/stm32/stm32-hash.c
index d33006d43f76..0473ced7b4ea 100644
--- a/drivers/crypto/stm32/stm32-hash.c
+++ b/drivers/crypto/stm32/stm32-hash.c
@@ -399,8 +399,7 @@ static int stm32_hash_update_cpu(struct stm32_hash_dev *hdev)
 	if (final) {
 		bufcnt = rctx->bufcnt;
 		rctx->bufcnt = 0;
-		err = stm32_hash_xmit_cpu(hdev, rctx->buffer, bufcnt,
-					  (rctx->flags & HASH_FLAGS_FINUP));
+		err = stm32_hash_xmit_cpu(hdev, rctx->buffer, bufcnt, 1);
 	}
 
 	return err;

-- 
2.39.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 3/6] crypto: stm32/hash: Use existing busy poll function

[Linus Walleij]

When exporting state we are waiting indefinitely in the same
was as the ordinary stm32_hash_wait_busy() poll-for-completion
function but without a timeout, which means we could hang in
an eternal loop. Fix this by waiting for completion like the
rest of the code.

Acked-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- No changes
ChangeLog v1->v2:
- Pick up Lionel's ACK
---
 drivers/crypto/stm32/stm32-hash.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/stm32/stm32-hash.c b/drivers/crypto/stm32/stm32-hash.c
index 0473ced7b4ea..cc0a4e413a82 100644
--- a/drivers/crypto/stm32/stm32-hash.c
+++ b/drivers/crypto/stm32/stm32-hash.c
@@ -960,11 +960,13 @@ static int stm32_hash_export(struct ahash_request *req, void *out)
 	struct stm32_hash_dev *hdev = stm32_hash_find_dev(ctx);
 	u32 *preg;
 	unsigned int i;
+	int ret;
 
 	pm_runtime_get_sync(hdev->dev);
 
-	while ((stm32_hash_read(hdev, HASH_SR) & HASH_SR_BUSY))
-		cpu_relax();
+	ret = stm32_hash_wait_busy(hdev);
+	if (ret)
+		return ret;
 
 	rctx->hw_context = kmalloc_array(3 + HASH_CSR_REGISTER_NUMBER,
 					 sizeof(u32),

-- 
2.39.0

[PATCH v3 3/6] crypto: stm32/hash: Use existing busy poll function

[Linus Walleij]

When exporting state we are waiting indefinitely in the same
was as the ordinary stm32_hash_wait_busy() poll-for-completion
function but without a timeout, which means we could hang in
an eternal loop. Fix this by waiting for completion like the
rest of the code.

Acked-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- No changes
ChangeLog v1->v2:
- Pick up Lionel's ACK
---
 drivers/crypto/stm32/stm32-hash.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/stm32/stm32-hash.c b/drivers/crypto/stm32/stm32-hash.c
index 0473ced7b4ea..cc0a4e413a82 100644
--- a/drivers/crypto/stm32/stm32-hash.c
+++ b/drivers/crypto/stm32/stm32-hash.c
@@ -960,11 +960,13 @@ static int stm32_hash_export(struct ahash_request *req, void *out)
 	struct stm32_hash_dev *hdev = stm32_hash_find_dev(ctx);
 	u32 *preg;
 	unsigned int i;
+	int ret;
 
 	pm_runtime_get_sync(hdev->dev);
 
-	while ((stm32_hash_read(hdev, HASH_SR) & HASH_SR_BUSY))
-		cpu_relax();
+	ret = stm32_hash_wait_busy(hdev);
+	if (ret)
+		return ret;
 
 	rctx->hw_context = kmalloc_array(3 + HASH_CSR_REGISTER_NUMBER,
 					 sizeof(u32),

-- 
2.39.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 4/6] crypto: stm32/hash: Wait for idle before final CPU xmit

[Linus Walleij]

When calculating the hash using the CPU, right before the final
hash calculation, heavy testing on Ux500 reveals that it is wise
to wait for the hardware to go idle before calculating the
final hash.

The default test vectors mostly worked fine, but when I used the
extensive tests and stress the hardware I ran into this problem.

Acked-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- No changes
ChangeLog v1->v2:
- Pick up Lionel's ACK
---
 drivers/crypto/stm32/stm32-hash.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/crypto/stm32/stm32-hash.c b/drivers/crypto/stm32/stm32-hash.c
index cc0a4e413a82..d4eefd8292ff 100644
--- a/drivers/crypto/stm32/stm32-hash.c
+++ b/drivers/crypto/stm32/stm32-hash.c
@@ -362,6 +362,9 @@ static int stm32_hash_xmit_cpu(struct stm32_hash_dev *hdev,
 		stm32_hash_write(hdev, HASH_DIN, buffer[count]);
 
 	if (final) {
+		if (stm32_hash_wait_busy(hdev))
+			return -ETIMEDOUT;
+
 		stm32_hash_set_nblw(hdev, length);
 		reg = stm32_hash_read(hdev, HASH_STR);
 		reg |= HASH_STR_DCAL;

-- 
2.39.0

[PATCH v3 4/6] crypto: stm32/hash: Wait for idle before final CPU xmit

[Linus Walleij]

When calculating the hash using the CPU, right before the final
hash calculation, heavy testing on Ux500 reveals that it is wise
to wait for the hardware to go idle before calculating the
final hash.

The default test vectors mostly worked fine, but when I used the
extensive tests and stress the hardware I ran into this problem.

Acked-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- No changes
ChangeLog v1->v2:
- Pick up Lionel's ACK
---
 drivers/crypto/stm32/stm32-hash.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/crypto/stm32/stm32-hash.c b/drivers/crypto/stm32/stm32-hash.c
index cc0a4e413a82..d4eefd8292ff 100644
--- a/drivers/crypto/stm32/stm32-hash.c
+++ b/drivers/crypto/stm32/stm32-hash.c
@@ -362,6 +362,9 @@ static int stm32_hash_xmit_cpu(struct stm32_hash_dev *hdev,
 		stm32_hash_write(hdev, HASH_DIN, buffer[count]);
 
 	if (final) {
+		if (stm32_hash_wait_busy(hdev))
+			return -ETIMEDOUT;
+
 		stm32_hash_set_nblw(hdev, length);
 		reg = stm32_hash_read(hdev, HASH_STR);
 		reg |= HASH_STR_DCAL;

-- 
2.39.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 5/6] crypto: stm32/hash: Support Ux500 hash

[Linus Walleij]

The Ux500 has a hash block which is an ancestor to the STM32
hash block. With some minor code path additions we can
support also this variant in the STM32 driver. Differences:

- Ux500 only supports SHA1 and SHA256 (+/- MAC) so we split
  up the algorithm registration per-algorithm and register
  each algorithm along with its MAC variant separately.

- Ux500 does not have an interrupt to indicate that hash
  calculation is complete, so we add code paths to handle
  polling for completion if the interrupt is missing in the
  device tree.

- Ux500 is lacking the SR status register, to check if an
  operating is complete, we need to poll the HASH_STR_DCAL
  bit in the HASH_STR register instead.

- Ux500 had the resulting hash at address offset 0x0c and
  8 32bit registers ahead. We account for this with a special
  code path when reading out the hash digest.

- Ux500 need a special bit set in the control register before
  performing the final hash calculation on an empty message.

- Ux500 hashes on empty messages will be performed if the
  above bit is set, but are incorrect. For this reason we
  just make an inline synchronous hash using a fallback
  hash.

Tested on the Ux500 Golden device with the extended tests.

Acked-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Changed to allocating the fallback algorithm in .cra_init()
  and free it in .cra_exit(), store the fallback in the context.
- Picked up Lionel's ACK reluctantly, please take a second
  look Lionel as I changed some stuff.
ChangeLog v1->v2:
- Rename flag for mdmat from has_mdma to has_mdmat
- Fix some random whitespacing errors
- Fix the errorpath in the synchronous fallback
---
 drivers/crypto/stm32/stm32-hash.c | 254 ++++++++++++++++++++++++++++++++------
 1 file changed, 219 insertions(+), 35 deletions(-)

diff --git a/drivers/crypto/stm32/stm32-hash.c b/drivers/crypto/stm32/stm32-hash.c
index d4eefd8292ff..7bf805563ac2 100644
--- a/drivers/crypto/stm32/stm32-hash.c
+++ b/drivers/crypto/stm32/stm32-hash.c
@@ -32,6 +32,7 @@
 #define HASH_CR				0x00
 #define HASH_DIN			0x04
 #define HASH_STR			0x08
+#define HASH_UX500_HREG(x)		(0x0c + ((x) * 0x04))
 #define HASH_IMR			0x20
 #define HASH_SR				0x24
 #define HASH_CSR(x)			(0x0F8 + ((x) * 0x04))
@@ -54,6 +55,10 @@
 #define HASH_CR_ALGO_SHA224		0x40000
 #define HASH_CR_ALGO_SHA256		0x40080
 
+#define HASH_CR_UX500_EMPTYMSG		BIT(20)
+#define HASH_CR_UX500_ALGO_SHA1		BIT(7)
+#define HASH_CR_UX500_ALGO_SHA256	0x0
+
 /* Interrupt */
 #define HASH_DINIE			BIT(0)
 #define HASH_DCIE			BIT(1)
@@ -115,6 +120,7 @@ enum stm32_hash_data_format {
 struct stm32_hash_ctx {
 	struct crypto_engine_ctx enginectx;
 	struct stm32_hash_dev	*hdev;
+	struct crypto_shash	*xtfm;
 	unsigned long		flags;
 
 	u8			key[HASH_MAX_KEY_SIZE];
@@ -157,6 +163,10 @@ struct stm32_hash_algs_info {
 struct stm32_hash_pdata {
 	struct stm32_hash_algs_info	*algs_info;
 	size_t				algs_info_size;
+	bool				has_sr;
+	bool				has_mdmat;
+	bool				broken_emptymsg;
+	bool				ux500;
 };
 
 struct stm32_hash_dev {
@@ -168,6 +178,7 @@ struct stm32_hash_dev {
 	phys_addr_t		phys_base;
 	u32			dma_mode;
 	u32			dma_maxburst;
+	bool			polled;
 
 	struct ahash_request	*req;
 	struct crypto_engine	*engine;
@@ -208,6 +219,11 @@ static inline int stm32_hash_wait_busy(struct stm32_hash_dev *hdev)
 {
 	u32 status;
 
+	/* The Ux500 lacks the special status register, we poll the DCAL bit instead */
+	if (!hdev->pdata->has_sr)
+		return readl_relaxed_poll_timeout(hdev->io_base + HASH_STR, status,
+						  !(status & HASH_STR_DCAL), 10, 10000);
+
 	return readl_relaxed_poll_timeout(hdev->io_base + HASH_SR, status,
 				   !(status & HASH_SR_BUSY), 10, 10000);
 }
@@ -249,7 +265,7 @@ static int stm32_hash_write_key(struct stm32_hash_dev *hdev)
 	return 0;
 }
 
-static void stm32_hash_write_ctrl(struct stm32_hash_dev *hdev)
+static void stm32_hash_write_ctrl(struct stm32_hash_dev *hdev, int bufcnt)
 {
 	struct stm32_hash_request_ctx *rctx = ahash_request_ctx(hdev->req);
 	struct crypto_ahash *tfm = crypto_ahash_reqtfm(hdev->req);
@@ -263,13 +279,19 @@ static void stm32_hash_write_ctrl(struct stm32_hash_dev *hdev)
 			reg |= HASH_CR_ALGO_MD5;
 			break;
 		case HASH_FLAGS_SHA1:
-			reg |= HASH_CR_ALGO_SHA1;
+			if (hdev->pdata->ux500)
+				reg |= HASH_CR_UX500_ALGO_SHA1;
+			else
+				reg |= HASH_CR_ALGO_SHA1;
 			break;
 		case HASH_FLAGS_SHA224:
 			reg |= HASH_CR_ALGO_SHA224;
 			break;
 		case HASH_FLAGS_SHA256:
-			reg |= HASH_CR_ALGO_SHA256;
+			if (hdev->pdata->ux500)
+				reg |= HASH_CR_UX500_ALGO_SHA256;
+			else
+				reg |= HASH_CR_ALGO_SHA256;
 			break;
 		default:
 			reg |= HASH_CR_ALGO_MD5;
@@ -284,7 +306,15 @@ static void stm32_hash_write_ctrl(struct stm32_hash_dev *hdev)
 				reg |= HASH_CR_LKEY;
 		}
 
-		stm32_hash_write(hdev, HASH_IMR, HASH_DCIE);
+		/*
+		 * On the Ux500 we need to set a special flag to indicate that
+		 * the message is zero length.
+		 */
+		if (hdev->pdata->ux500 && bufcnt == 0)
+			reg |= HASH_CR_UX500_EMPTYMSG;
+
+		if (!hdev->polled)
+			stm32_hash_write(hdev, HASH_IMR, HASH_DCIE);
 
 		stm32_hash_write(hdev, HASH_CR, reg);
 
@@ -345,7 +375,7 @@ static int stm32_hash_xmit_cpu(struct stm32_hash_dev *hdev,
 
 	hdev->flags |= HASH_FLAGS_CPU;
 
-	stm32_hash_write_ctrl(hdev);
+	stm32_hash_write_ctrl(hdev, length);
 
 	if (stm32_hash_wait_busy(hdev))
 		return -ETIMEDOUT;
@@ -403,6 +433,14 @@ static int stm32_hash_update_cpu(struct stm32_hash_dev *hdev)
 		bufcnt = rctx->bufcnt;
 		rctx->bufcnt = 0;
 		err = stm32_hash_xmit_cpu(hdev, rctx->buffer, bufcnt, 1);
+
+		/* If we have an IRQ, wait for that, else poll for completion */
+		if (hdev->polled) {
+			if (stm32_hash_wait_busy(hdev))
+				return -ETIMEDOUT;
+			hdev->flags |= HASH_FLAGS_OUTPUT_READY;
+			err = 0;
+		}
 	}
 
 	return err;
@@ -433,11 +471,12 @@ static int stm32_hash_xmit_dma(struct stm32_hash_dev *hdev,
 
 	reg = stm32_hash_read(hdev, HASH_CR);
 
-	if (mdma)
-		reg |= HASH_CR_MDMAT;
-	else
-		reg &= ~HASH_CR_MDMAT;
-
+	if (!hdev->pdata->has_mdmat) {
+		if (mdma)
+			reg |= HASH_CR_MDMAT;
+		else
+			reg &= ~HASH_CR_MDMAT;
+	}
 	reg |= HASH_CR_DMAE;
 
 	stm32_hash_write(hdev, HASH_CR, reg);
@@ -558,7 +597,7 @@ static int stm32_hash_dma_send(struct stm32_hash_dev *hdev)
 	if (rctx->nents < 0)
 		return -EINVAL;
 
-	stm32_hash_write_ctrl(hdev);
+	stm32_hash_write_ctrl(hdev, rctx->total);
 
 	if (hdev->flags & HASH_FLAGS_HMAC) {
 		err = stm32_hash_hmac_dma_send(hdev);
@@ -745,16 +784,57 @@ static int stm32_hash_final_req(struct stm32_hash_dev *hdev)
 	else
 		err = stm32_hash_xmit_cpu(hdev, rctx->buffer, buflen, 1);
 
+	/* If we have an IRQ, wait for that, else poll for completion */
+	if (hdev->polled) {
+		if (stm32_hash_wait_busy(hdev))
+			return -ETIMEDOUT;
+		hdev->flags |= HASH_FLAGS_OUTPUT_READY;
+		/* Caller will call stm32_hash_finish_req() */
+		err = 0;
+	}
 
 	return err;
 }
 
+static void stm32_hash_emptymsg_fallback(struct ahash_request *req)
+{
+	struct crypto_ahash *ahash = crypto_ahash_reqtfm(req);
+	struct stm32_hash_ctx *ctx = crypto_ahash_ctx(ahash);
+	struct stm32_hash_request_ctx *rctx = ahash_request_ctx(req);
+	struct stm32_hash_dev *hdev = rctx->hdev;
+	int ret;
+
+	dev_dbg(hdev->dev, "use fallback message size 0 key size %d\n",
+		ctx->keylen);
+
+	if (!ctx->xtfm) {
+		dev_err(hdev->dev, "no fallback engine\n");
+		return;
+	}
+
+	if (ctx->keylen) {
+		ret = crypto_shash_setkey(ctx->xtfm, ctx->key, ctx->keylen);
+		if (ret) {
+			dev_err(hdev->dev, "failed to set key ret=%d\n", ret);
+			return;
+		}
+	}
+
+	ret = crypto_shash_tfm_digest(ctx->xtfm, NULL, 0, rctx->digest);
+	if (ret)
+		dev_err(hdev->dev, "shash digest error\n");
+}
+
 static void stm32_hash_copy_hash(struct ahash_request *req)
 {
 	struct stm32_hash_request_ctx *rctx = ahash_request_ctx(req);
+	struct stm32_hash_dev *hdev = rctx->hdev;
 	__be32 *hash = (void *)rctx->digest;
 	unsigned int i, hashsize;
 
+	if (hdev->pdata->broken_emptymsg && !req->nbytes)
+		return stm32_hash_emptymsg_fallback(req);
+
 	switch (rctx->flags & HASH_FLAGS_ALGO_MASK) {
 	case HASH_FLAGS_MD5:
 		hashsize = MD5_DIGEST_SIZE;
@@ -772,9 +852,14 @@ static void stm32_hash_copy_hash(struct ahash_request *req)
 		return;
 	}
 
-	for (i = 0; i < hashsize / sizeof(u32); i++)
-		hash[i] = cpu_to_be32(stm32_hash_read(rctx->hdev,
-						      HASH_HREG(i)));
+	for (i = 0; i < hashsize / sizeof(u32); i++) {
+		if (hdev->pdata->ux500)
+			hash[i] = cpu_to_be32(stm32_hash_read(hdev,
+					      HASH_UX500_HREG(i)));
+		else
+			hash[i] = cpu_to_be32(stm32_hash_read(hdev,
+					      HASH_HREG(i)));
+	}
 }
 
 static int stm32_hash_finish(struct ahash_request *req)
@@ -977,7 +1062,8 @@ static int stm32_hash_export(struct ahash_request *req, void *out)
 
 	preg = rctx->hw_context;
 
-	*preg++ = stm32_hash_read(hdev, HASH_IMR);
+	if (!hdev->pdata->ux500)
+		*preg++ = stm32_hash_read(hdev, HASH_IMR);
 	*preg++ = stm32_hash_read(hdev, HASH_STR);
 	*preg++ = stm32_hash_read(hdev, HASH_CR);
 	for (i = 0; i < HASH_CSR_REGISTER_NUMBER; i++)
@@ -1006,7 +1092,8 @@ static int stm32_hash_import(struct ahash_request *req, const void *in)
 
 	pm_runtime_get_sync(hdev->dev);
 
-	stm32_hash_write(hdev, HASH_IMR, *preg++);
+	if (!hdev->pdata->ux500)
+		stm32_hash_write(hdev, HASH_IMR, *preg++);
 	stm32_hash_write(hdev, HASH_STR, *preg++);
 	stm32_hash_write(hdev, HASH_CR, *preg);
 	reg = *preg++ | HASH_CR_INIT;
@@ -1038,6 +1125,29 @@ static int stm32_hash_setkey(struct crypto_ahash *tfm,
 	return 0;
 }
 
+static int stm32_hash_init_fallback(struct crypto_tfm *tfm)
+{
+	struct stm32_hash_ctx *ctx = crypto_tfm_ctx(tfm);
+	struct stm32_hash_dev *hdev = stm32_hash_find_dev(ctx);
+	const char *name = crypto_tfm_alg_name(tfm);
+	struct crypto_shash *xtfm;
+
+	/* The fallback is only needed on Ux500 */
+	if (!hdev->pdata->ux500)
+		return 0;
+
+	xtfm = crypto_alloc_shash(name, 0, CRYPTO_ALG_NEED_FALLBACK);
+	if (IS_ERR(xtfm)) {
+		dev_err(hdev->dev, "failed to allocate %s fallback\n",
+			name);
+		return PTR_ERR(xtfm);
+	}
+	dev_info(hdev->dev, "allocated %s fallback\n", name);
+	ctx->xtfm = xtfm;
+
+	return 0;
+}
+
 static int stm32_hash_cra_init_algs(struct crypto_tfm *tfm,
 				    const char *algs_hmac_name)
 {
@@ -1054,7 +1164,8 @@ static int stm32_hash_cra_init_algs(struct crypto_tfm *tfm,
 	ctx->enginectx.op.do_one_request = stm32_hash_one_request;
 	ctx->enginectx.op.prepare_request = stm32_hash_prepare_req;
 	ctx->enginectx.op.unprepare_request = NULL;
-	return 0;
+
+	return stm32_hash_init_fallback(tfm);
 }
 
 static int stm32_hash_cra_init(struct crypto_tfm *tfm)
@@ -1082,6 +1193,14 @@ static int stm32_hash_cra_sha256_init(struct crypto_tfm *tfm)
 	return stm32_hash_cra_init_algs(tfm, "sha256");
 }
 
+static void stm32_hash_cra_exit(struct crypto_tfm *tfm)
+{
+	struct stm32_hash_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	if (ctx->xtfm)
+		crypto_free_shash(ctx->xtfm);
+}
+
 static irqreturn_t stm32_hash_irq_thread(int irq, void *dev_id)
 {
 	struct stm32_hash_dev *hdev = dev_id;
@@ -1125,7 +1244,7 @@ static irqreturn_t stm32_hash_irq_handler(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-static struct ahash_alg algs_md5_sha1[] = {
+static struct ahash_alg algs_md5[] = {
 	{
 		.init = stm32_hash_init,
 		.update = stm32_hash_update,
@@ -1147,6 +1266,7 @@ static struct ahash_alg algs_md5_sha1[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
@@ -1173,10 +1293,14 @@ static struct ahash_alg algs_md5_sha1[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_md5_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
 	},
+};
+
+static struct ahash_alg algs_sha1[] = {
 	{
 		.init = stm32_hash_init,
 		.update = stm32_hash_update,
@@ -1198,6 +1322,7 @@ static struct ahash_alg algs_md5_sha1[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
@@ -1224,13 +1349,14 @@ static struct ahash_alg algs_md5_sha1[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_sha1_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
 	},
 };
 
-static struct ahash_alg algs_sha224_sha256[] = {
+static struct ahash_alg algs_sha224[] = {
 	{
 		.init = stm32_hash_init,
 		.update = stm32_hash_update,
@@ -1252,6 +1378,7 @@ static struct ahash_alg algs_sha224_sha256[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
@@ -1278,10 +1405,14 @@ static struct ahash_alg algs_sha224_sha256[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_sha224_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
 	},
+};
+
+static struct ahash_alg algs_sha256[] = {
 	{
 		.init = stm32_hash_init,
 		.update = stm32_hash_update,
@@ -1303,6 +1434,7 @@ static struct ahash_alg algs_sha224_sha256[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
@@ -1329,6 +1461,7 @@ static struct ahash_alg algs_sha224_sha256[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_sha256_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
@@ -1374,35 +1507,73 @@ static int stm32_hash_unregister_algs(struct stm32_hash_dev *hdev)
 	return 0;
 }
 
+static struct stm32_hash_algs_info stm32_hash_algs_info_ux500[] = {
+	{
+		.algs_list	= algs_sha1,
+		.size		= ARRAY_SIZE(algs_sha1),
+	},
+	{
+		.algs_list	= algs_sha256,
+		.size		= ARRAY_SIZE(algs_sha256),
+	},
+};
+
+static const struct stm32_hash_pdata stm32_hash_pdata_ux500 = {
+	.algs_info	= stm32_hash_algs_info_ux500,
+	.algs_info_size	= ARRAY_SIZE(stm32_hash_algs_info_ux500),
+	.broken_emptymsg = true,
+	.ux500		= true,
+};
+
 static struct stm32_hash_algs_info stm32_hash_algs_info_stm32f4[] = {
 	{
-		.algs_list	= algs_md5_sha1,
-		.size		= ARRAY_SIZE(algs_md5_sha1),
+		.algs_list	= algs_md5,
+		.size		= ARRAY_SIZE(algs_md5),
+	},
+	{
+		.algs_list	= algs_sha1,
+		.size		= ARRAY_SIZE(algs_sha1),
 	},
 };
 
 static const struct stm32_hash_pdata stm32_hash_pdata_stm32f4 = {
 	.algs_info	= stm32_hash_algs_info_stm32f4,
 	.algs_info_size	= ARRAY_SIZE(stm32_hash_algs_info_stm32f4),
+	.has_sr		= true,
+	.has_mdmat	= true,
 };
 
 static struct stm32_hash_algs_info stm32_hash_algs_info_stm32f7[] = {
 	{
-		.algs_list	= algs_md5_sha1,
-		.size		= ARRAY_SIZE(algs_md5_sha1),
+		.algs_list	= algs_md5,
+		.size		= ARRAY_SIZE(algs_md5),
+	},
+	{
+		.algs_list	= algs_sha1,
+		.size		= ARRAY_SIZE(algs_sha1),
 	},
 	{
-		.algs_list	= algs_sha224_sha256,
-		.size		= ARRAY_SIZE(algs_sha224_sha256),
+		.algs_list	= algs_sha224,
+		.size		= ARRAY_SIZE(algs_sha224),
+	},
+	{
+		.algs_list	= algs_sha256,
+		.size		= ARRAY_SIZE(algs_sha256),
 	},
 };
 
 static const struct stm32_hash_pdata stm32_hash_pdata_stm32f7 = {
 	.algs_info	= stm32_hash_algs_info_stm32f7,
 	.algs_info_size	= ARRAY_SIZE(stm32_hash_algs_info_stm32f7),
+	.has_sr		= true,
+	.has_mdmat	= true,
 };
 
 static const struct of_device_id stm32_hash_of_match[] = {
+	{
+		.compatible = "stericsson,ux500-hash",
+		.data = &stm32_hash_pdata_ux500,
+	},
 	{
 		.compatible = "st,stm32f456-hash",
 		.data = &stm32_hash_pdata_stm32f4,
@@ -1456,16 +1627,23 @@ static int stm32_hash_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
+	irq = platform_get_irq_optional(pdev, 0);
+	if (irq < 0 && irq != -ENXIO)
 		return irq;
 
-	ret = devm_request_threaded_irq(dev, irq, stm32_hash_irq_handler,
-					stm32_hash_irq_thread, IRQF_ONESHOT,
-					dev_name(dev), hdev);
-	if (ret) {
-		dev_err(dev, "Cannot grab IRQ\n");
-		return ret;
+	if (irq > 0) {
+		ret = devm_request_threaded_irq(dev, irq,
+						stm32_hash_irq_handler,
+						stm32_hash_irq_thread,
+						IRQF_ONESHOT,
+						dev_name(dev), hdev);
+		if (ret) {
+			dev_err(dev, "Cannot grab IRQ\n");
+			return ret;
+		}
+	} else {
+		dev_info(dev, "No IRQ, use polling mode\n");
+		hdev->polled = true;
 	}
 
 	hdev->clk = devm_clk_get(&pdev->dev, NULL);
@@ -1507,9 +1685,11 @@ static int stm32_hash_probe(struct platform_device *pdev)
 	case 0:
 		break;
 	case -ENOENT:
-		dev_dbg(dev, "DMA mode not available\n");
+	case -ENODEV:
+		dev_info(dev, "DMA mode not available\n");
 		break;
 	default:
+		dev_err(dev, "DMA init error %d\n", ret);
 		goto err_dma;
 	}
 
@@ -1528,7 +1708,11 @@ static int stm32_hash_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_engine_start;
 
-	hdev->dma_mode = stm32_hash_read(hdev, HASH_HWCFGR);
+	if (hdev->pdata->ux500)
+		/* FIXME: implement DMA mode for Ux500 */
+		hdev->dma_mode = 0;
+	else
+		hdev->dma_mode = stm32_hash_read(hdev, HASH_HWCFGR);
 
 	/* Register algos */
 	ret = stm32_hash_register_algs(hdev);

-- 
2.39.0

[PATCH v3 5/6] crypto: stm32/hash: Support Ux500 hash

[Linus Walleij]

The Ux500 has a hash block which is an ancestor to the STM32
hash block. With some minor code path additions we can
support also this variant in the STM32 driver. Differences:

- Ux500 only supports SHA1 and SHA256 (+/- MAC) so we split
  up the algorithm registration per-algorithm and register
  each algorithm along with its MAC variant separately.

- Ux500 does not have an interrupt to indicate that hash
  calculation is complete, so we add code paths to handle
  polling for completion if the interrupt is missing in the
  device tree.

- Ux500 is lacking the SR status register, to check if an
  operating is complete, we need to poll the HASH_STR_DCAL
  bit in the HASH_STR register instead.

- Ux500 had the resulting hash at address offset 0x0c and
  8 32bit registers ahead. We account for this with a special
  code path when reading out the hash digest.

- Ux500 need a special bit set in the control register before
  performing the final hash calculation on an empty message.

- Ux500 hashes on empty messages will be performed if the
  above bit is set, but are incorrect. For this reason we
  just make an inline synchronous hash using a fallback
  hash.

Tested on the Ux500 Golden device with the extended tests.

Acked-by: Lionel Debieve <lionel.debieve@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Changed to allocating the fallback algorithm in .cra_init()
  and free it in .cra_exit(), store the fallback in the context.
- Picked up Lionel's ACK reluctantly, please take a second
  look Lionel as I changed some stuff.
ChangeLog v1->v2:
- Rename flag for mdmat from has_mdma to has_mdmat
- Fix some random whitespacing errors
- Fix the errorpath in the synchronous fallback
---
 drivers/crypto/stm32/stm32-hash.c | 254 ++++++++++++++++++++++++++++++++------
 1 file changed, 219 insertions(+), 35 deletions(-)

diff --git a/drivers/crypto/stm32/stm32-hash.c b/drivers/crypto/stm32/stm32-hash.c
index d4eefd8292ff..7bf805563ac2 100644
--- a/drivers/crypto/stm32/stm32-hash.c
+++ b/drivers/crypto/stm32/stm32-hash.c
@@ -32,6 +32,7 @@
 #define HASH_CR				0x00
 #define HASH_DIN			0x04
 #define HASH_STR			0x08
+#define HASH_UX500_HREG(x)		(0x0c + ((x) * 0x04))
 #define HASH_IMR			0x20
 #define HASH_SR				0x24
 #define HASH_CSR(x)			(0x0F8 + ((x) * 0x04))
@@ -54,6 +55,10 @@
 #define HASH_CR_ALGO_SHA224		0x40000
 #define HASH_CR_ALGO_SHA256		0x40080
 
+#define HASH_CR_UX500_EMPTYMSG		BIT(20)
+#define HASH_CR_UX500_ALGO_SHA1		BIT(7)
+#define HASH_CR_UX500_ALGO_SHA256	0x0
+
 /* Interrupt */
 #define HASH_DINIE			BIT(0)
 #define HASH_DCIE			BIT(1)
@@ -115,6 +120,7 @@ enum stm32_hash_data_format {
 struct stm32_hash_ctx {
 	struct crypto_engine_ctx enginectx;
 	struct stm32_hash_dev	*hdev;
+	struct crypto_shash	*xtfm;
 	unsigned long		flags;
 
 	u8			key[HASH_MAX_KEY_SIZE];
@@ -157,6 +163,10 @@ struct stm32_hash_algs_info {
 struct stm32_hash_pdata {
 	struct stm32_hash_algs_info	*algs_info;
 	size_t				algs_info_size;
+	bool				has_sr;
+	bool				has_mdmat;
+	bool				broken_emptymsg;
+	bool				ux500;
 };
 
 struct stm32_hash_dev {
@@ -168,6 +178,7 @@ struct stm32_hash_dev {
 	phys_addr_t		phys_base;
 	u32			dma_mode;
 	u32			dma_maxburst;
+	bool			polled;
 
 	struct ahash_request	*req;
 	struct crypto_engine	*engine;
@@ -208,6 +219,11 @@ static inline int stm32_hash_wait_busy(struct stm32_hash_dev *hdev)
 {
 	u32 status;
 
+	/* The Ux500 lacks the special status register, we poll the DCAL bit instead */
+	if (!hdev->pdata->has_sr)
+		return readl_relaxed_poll_timeout(hdev->io_base + HASH_STR, status,
+						  !(status & HASH_STR_DCAL), 10, 10000);
+
 	return readl_relaxed_poll_timeout(hdev->io_base + HASH_SR, status,
 				   !(status & HASH_SR_BUSY), 10, 10000);
 }
@@ -249,7 +265,7 @@ static int stm32_hash_write_key(struct stm32_hash_dev *hdev)
 	return 0;
 }
 
-static void stm32_hash_write_ctrl(struct stm32_hash_dev *hdev)
+static void stm32_hash_write_ctrl(struct stm32_hash_dev *hdev, int bufcnt)
 {
 	struct stm32_hash_request_ctx *rctx = ahash_request_ctx(hdev->req);
 	struct crypto_ahash *tfm = crypto_ahash_reqtfm(hdev->req);
@@ -263,13 +279,19 @@ static void stm32_hash_write_ctrl(struct stm32_hash_dev *hdev)
 			reg |= HASH_CR_ALGO_MD5;
 			break;
 		case HASH_FLAGS_SHA1:
-			reg |= HASH_CR_ALGO_SHA1;
+			if (hdev->pdata->ux500)
+				reg |= HASH_CR_UX500_ALGO_SHA1;
+			else
+				reg |= HASH_CR_ALGO_SHA1;
 			break;
 		case HASH_FLAGS_SHA224:
 			reg |= HASH_CR_ALGO_SHA224;
 			break;
 		case HASH_FLAGS_SHA256:
-			reg |= HASH_CR_ALGO_SHA256;
+			if (hdev->pdata->ux500)
+				reg |= HASH_CR_UX500_ALGO_SHA256;
+			else
+				reg |= HASH_CR_ALGO_SHA256;
 			break;
 		default:
 			reg |= HASH_CR_ALGO_MD5;
@@ -284,7 +306,15 @@ static void stm32_hash_write_ctrl(struct stm32_hash_dev *hdev)
 				reg |= HASH_CR_LKEY;
 		}
 
-		stm32_hash_write(hdev, HASH_IMR, HASH_DCIE);
+		/*
+		 * On the Ux500 we need to set a special flag to indicate that
+		 * the message is zero length.
+		 */
+		if (hdev->pdata->ux500 && bufcnt == 0)
+			reg |= HASH_CR_UX500_EMPTYMSG;
+
+		if (!hdev->polled)
+			stm32_hash_write(hdev, HASH_IMR, HASH_DCIE);
 
 		stm32_hash_write(hdev, HASH_CR, reg);
 
@@ -345,7 +375,7 @@ static int stm32_hash_xmit_cpu(struct stm32_hash_dev *hdev,
 
 	hdev->flags |= HASH_FLAGS_CPU;
 
-	stm32_hash_write_ctrl(hdev);
+	stm32_hash_write_ctrl(hdev, length);
 
 	if (stm32_hash_wait_busy(hdev))
 		return -ETIMEDOUT;
@@ -403,6 +433,14 @@ static int stm32_hash_update_cpu(struct stm32_hash_dev *hdev)
 		bufcnt = rctx->bufcnt;
 		rctx->bufcnt = 0;
 		err = stm32_hash_xmit_cpu(hdev, rctx->buffer, bufcnt, 1);
+
+		/* If we have an IRQ, wait for that, else poll for completion */
+		if (hdev->polled) {
+			if (stm32_hash_wait_busy(hdev))
+				return -ETIMEDOUT;
+			hdev->flags |= HASH_FLAGS_OUTPUT_READY;
+			err = 0;
+		}
 	}
 
 	return err;
@@ -433,11 +471,12 @@ static int stm32_hash_xmit_dma(struct stm32_hash_dev *hdev,
 
 	reg = stm32_hash_read(hdev, HASH_CR);
 
-	if (mdma)
-		reg |= HASH_CR_MDMAT;
-	else
-		reg &= ~HASH_CR_MDMAT;
-
+	if (!hdev->pdata->has_mdmat) {
+		if (mdma)
+			reg |= HASH_CR_MDMAT;
+		else
+			reg &= ~HASH_CR_MDMAT;
+	}
 	reg |= HASH_CR_DMAE;
 
 	stm32_hash_write(hdev, HASH_CR, reg);
@@ -558,7 +597,7 @@ static int stm32_hash_dma_send(struct stm32_hash_dev *hdev)
 	if (rctx->nents < 0)
 		return -EINVAL;
 
-	stm32_hash_write_ctrl(hdev);
+	stm32_hash_write_ctrl(hdev, rctx->total);
 
 	if (hdev->flags & HASH_FLAGS_HMAC) {
 		err = stm32_hash_hmac_dma_send(hdev);
@@ -745,16 +784,57 @@ static int stm32_hash_final_req(struct stm32_hash_dev *hdev)
 	else
 		err = stm32_hash_xmit_cpu(hdev, rctx->buffer, buflen, 1);
 
+	/* If we have an IRQ, wait for that, else poll for completion */
+	if (hdev->polled) {
+		if (stm32_hash_wait_busy(hdev))
+			return -ETIMEDOUT;
+		hdev->flags |= HASH_FLAGS_OUTPUT_READY;
+		/* Caller will call stm32_hash_finish_req() */
+		err = 0;
+	}
 
 	return err;
 }
 
+static void stm32_hash_emptymsg_fallback(struct ahash_request *req)
+{
+	struct crypto_ahash *ahash = crypto_ahash_reqtfm(req);
+	struct stm32_hash_ctx *ctx = crypto_ahash_ctx(ahash);
+	struct stm32_hash_request_ctx *rctx = ahash_request_ctx(req);
+	struct stm32_hash_dev *hdev = rctx->hdev;
+	int ret;
+
+	dev_dbg(hdev->dev, "use fallback message size 0 key size %d\n",
+		ctx->keylen);
+
+	if (!ctx->xtfm) {
+		dev_err(hdev->dev, "no fallback engine\n");
+		return;
+	}
+
+	if (ctx->keylen) {
+		ret = crypto_shash_setkey(ctx->xtfm, ctx->key, ctx->keylen);
+		if (ret) {
+			dev_err(hdev->dev, "failed to set key ret=%d\n", ret);
+			return;
+		}
+	}
+
+	ret = crypto_shash_tfm_digest(ctx->xtfm, NULL, 0, rctx->digest);
+	if (ret)
+		dev_err(hdev->dev, "shash digest error\n");
+}
+
 static void stm32_hash_copy_hash(struct ahash_request *req)
 {
 	struct stm32_hash_request_ctx *rctx = ahash_request_ctx(req);
+	struct stm32_hash_dev *hdev = rctx->hdev;
 	__be32 *hash = (void *)rctx->digest;
 	unsigned int i, hashsize;
 
+	if (hdev->pdata->broken_emptymsg && !req->nbytes)
+		return stm32_hash_emptymsg_fallback(req);
+
 	switch (rctx->flags & HASH_FLAGS_ALGO_MASK) {
 	case HASH_FLAGS_MD5:
 		hashsize = MD5_DIGEST_SIZE;
@@ -772,9 +852,14 @@ static void stm32_hash_copy_hash(struct ahash_request *req)
 		return;
 	}
 
-	for (i = 0; i < hashsize / sizeof(u32); i++)
-		hash[i] = cpu_to_be32(stm32_hash_read(rctx->hdev,
-						      HASH_HREG(i)));
+	for (i = 0; i < hashsize / sizeof(u32); i++) {
+		if (hdev->pdata->ux500)
+			hash[i] = cpu_to_be32(stm32_hash_read(hdev,
+					      HASH_UX500_HREG(i)));
+		else
+			hash[i] = cpu_to_be32(stm32_hash_read(hdev,
+					      HASH_HREG(i)));
+	}
 }
 
 static int stm32_hash_finish(struct ahash_request *req)
@@ -977,7 +1062,8 @@ static int stm32_hash_export(struct ahash_request *req, void *out)
 
 	preg = rctx->hw_context;
 
-	*preg++ = stm32_hash_read(hdev, HASH_IMR);
+	if (!hdev->pdata->ux500)
+		*preg++ = stm32_hash_read(hdev, HASH_IMR);
 	*preg++ = stm32_hash_read(hdev, HASH_STR);
 	*preg++ = stm32_hash_read(hdev, HASH_CR);
 	for (i = 0; i < HASH_CSR_REGISTER_NUMBER; i++)
@@ -1006,7 +1092,8 @@ static int stm32_hash_import(struct ahash_request *req, const void *in)
 
 	pm_runtime_get_sync(hdev->dev);
 
-	stm32_hash_write(hdev, HASH_IMR, *preg++);
+	if (!hdev->pdata->ux500)
+		stm32_hash_write(hdev, HASH_IMR, *preg++);
 	stm32_hash_write(hdev, HASH_STR, *preg++);
 	stm32_hash_write(hdev, HASH_CR, *preg);
 	reg = *preg++ | HASH_CR_INIT;
@@ -1038,6 +1125,29 @@ static int stm32_hash_setkey(struct crypto_ahash *tfm,
 	return 0;
 }
 
+static int stm32_hash_init_fallback(struct crypto_tfm *tfm)
+{
+	struct stm32_hash_ctx *ctx = crypto_tfm_ctx(tfm);
+	struct stm32_hash_dev *hdev = stm32_hash_find_dev(ctx);
+	const char *name = crypto_tfm_alg_name(tfm);
+	struct crypto_shash *xtfm;
+
+	/* The fallback is only needed on Ux500 */
+	if (!hdev->pdata->ux500)
+		return 0;
+
+	xtfm = crypto_alloc_shash(name, 0, CRYPTO_ALG_NEED_FALLBACK);
+	if (IS_ERR(xtfm)) {
+		dev_err(hdev->dev, "failed to allocate %s fallback\n",
+			name);
+		return PTR_ERR(xtfm);
+	}
+	dev_info(hdev->dev, "allocated %s fallback\n", name);
+	ctx->xtfm = xtfm;
+
+	return 0;
+}
+
 static int stm32_hash_cra_init_algs(struct crypto_tfm *tfm,
 				    const char *algs_hmac_name)
 {
@@ -1054,7 +1164,8 @@ static int stm32_hash_cra_init_algs(struct crypto_tfm *tfm,
 	ctx->enginectx.op.do_one_request = stm32_hash_one_request;
 	ctx->enginectx.op.prepare_request = stm32_hash_prepare_req;
 	ctx->enginectx.op.unprepare_request = NULL;
-	return 0;
+
+	return stm32_hash_init_fallback(tfm);
 }
 
 static int stm32_hash_cra_init(struct crypto_tfm *tfm)
@@ -1082,6 +1193,14 @@ static int stm32_hash_cra_sha256_init(struct crypto_tfm *tfm)
 	return stm32_hash_cra_init_algs(tfm, "sha256");
 }
 
+static void stm32_hash_cra_exit(struct crypto_tfm *tfm)
+{
+	struct stm32_hash_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	if (ctx->xtfm)
+		crypto_free_shash(ctx->xtfm);
+}
+
 static irqreturn_t stm32_hash_irq_thread(int irq, void *dev_id)
 {
 	struct stm32_hash_dev *hdev = dev_id;
@@ -1125,7 +1244,7 @@ static irqreturn_t stm32_hash_irq_handler(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-static struct ahash_alg algs_md5_sha1[] = {
+static struct ahash_alg algs_md5[] = {
 	{
 		.init = stm32_hash_init,
 		.update = stm32_hash_update,
@@ -1147,6 +1266,7 @@ static struct ahash_alg algs_md5_sha1[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
@@ -1173,10 +1293,14 @@ static struct ahash_alg algs_md5_sha1[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_md5_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
 	},
+};
+
+static struct ahash_alg algs_sha1[] = {
 	{
 		.init = stm32_hash_init,
 		.update = stm32_hash_update,
@@ -1198,6 +1322,7 @@ static struct ahash_alg algs_md5_sha1[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
@@ -1224,13 +1349,14 @@ static struct ahash_alg algs_md5_sha1[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_sha1_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
 	},
 };
 
-static struct ahash_alg algs_sha224_sha256[] = {
+static struct ahash_alg algs_sha224[] = {
 	{
 		.init = stm32_hash_init,
 		.update = stm32_hash_update,
@@ -1252,6 +1378,7 @@ static struct ahash_alg algs_sha224_sha256[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
@@ -1278,10 +1405,14 @@ static struct ahash_alg algs_sha224_sha256[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_sha224_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
 	},
+};
+
+static struct ahash_alg algs_sha256[] = {
 	{
 		.init = stm32_hash_init,
 		.update = stm32_hash_update,
@@ -1303,6 +1434,7 @@ static struct ahash_alg algs_sha224_sha256[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
@@ -1329,6 +1461,7 @@ static struct ahash_alg algs_sha224_sha256[] = {
 				.cra_ctxsize = sizeof(struct stm32_hash_ctx),
 				.cra_alignmask = 3,
 				.cra_init = stm32_hash_cra_sha256_init,
+				.cra_exit = stm32_hash_cra_exit,
 				.cra_module = THIS_MODULE,
 			}
 		}
@@ -1374,35 +1507,73 @@ static int stm32_hash_unregister_algs(struct stm32_hash_dev *hdev)
 	return 0;
 }
 
+static struct stm32_hash_algs_info stm32_hash_algs_info_ux500[] = {
+	{
+		.algs_list	= algs_sha1,
+		.size		= ARRAY_SIZE(algs_sha1),
+	},
+	{
+		.algs_list	= algs_sha256,
+		.size		= ARRAY_SIZE(algs_sha256),
+	},
+};
+
+static const struct stm32_hash_pdata stm32_hash_pdata_ux500 = {
+	.algs_info	= stm32_hash_algs_info_ux500,
+	.algs_info_size	= ARRAY_SIZE(stm32_hash_algs_info_ux500),
+	.broken_emptymsg = true,
+	.ux500		= true,
+};
+
 static struct stm32_hash_algs_info stm32_hash_algs_info_stm32f4[] = {
 	{
-		.algs_list	= algs_md5_sha1,
-		.size		= ARRAY_SIZE(algs_md5_sha1),
+		.algs_list	= algs_md5,
+		.size		= ARRAY_SIZE(algs_md5),
+	},
+	{
+		.algs_list	= algs_sha1,
+		.size		= ARRAY_SIZE(algs_sha1),
 	},
 };
 
 static const struct stm32_hash_pdata stm32_hash_pdata_stm32f4 = {
 	.algs_info	= stm32_hash_algs_info_stm32f4,
 	.algs_info_size	= ARRAY_SIZE(stm32_hash_algs_info_stm32f4),
+	.has_sr		= true,
+	.has_mdmat	= true,
 };
 
 static struct stm32_hash_algs_info stm32_hash_algs_info_stm32f7[] = {
 	{
-		.algs_list	= algs_md5_sha1,
-		.size		= ARRAY_SIZE(algs_md5_sha1),
+		.algs_list	= algs_md5,
+		.size		= ARRAY_SIZE(algs_md5),
+	},
+	{
+		.algs_list	= algs_sha1,
+		.size		= ARRAY_SIZE(algs_sha1),
 	},
 	{
-		.algs_list	= algs_sha224_sha256,
-		.size		= ARRAY_SIZE(algs_sha224_sha256),
+		.algs_list	= algs_sha224,
+		.size		= ARRAY_SIZE(algs_sha224),
+	},
+	{
+		.algs_list	= algs_sha256,
+		.size		= ARRAY_SIZE(algs_sha256),
 	},
 };
 
 static const struct stm32_hash_pdata stm32_hash_pdata_stm32f7 = {
 	.algs_info	= stm32_hash_algs_info_stm32f7,
 	.algs_info_size	= ARRAY_SIZE(stm32_hash_algs_info_stm32f7),
+	.has_sr		= true,
+	.has_mdmat	= true,
 };
 
 static const struct of_device_id stm32_hash_of_match[] = {
+	{
+		.compatible = "stericsson,ux500-hash",
+		.data = &stm32_hash_pdata_ux500,
+	},
 	{
 		.compatible = "st,stm32f456-hash",
 		.data = &stm32_hash_pdata_stm32f4,
@@ -1456,16 +1627,23 @@ static int stm32_hash_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
+	irq = platform_get_irq_optional(pdev, 0);
+	if (irq < 0 && irq != -ENXIO)
 		return irq;
 
-	ret = devm_request_threaded_irq(dev, irq, stm32_hash_irq_handler,
-					stm32_hash_irq_thread, IRQF_ONESHOT,
-					dev_name(dev), hdev);
-	if (ret) {
-		dev_err(dev, "Cannot grab IRQ\n");
-		return ret;
+	if (irq > 0) {
+		ret = devm_request_threaded_irq(dev, irq,
+						stm32_hash_irq_handler,
+						stm32_hash_irq_thread,
+						IRQF_ONESHOT,
+						dev_name(dev), hdev);
+		if (ret) {
+			dev_err(dev, "Cannot grab IRQ\n");
+			return ret;
+		}
+	} else {
+		dev_info(dev, "No IRQ, use polling mode\n");
+		hdev->polled = true;
 	}
 
 	hdev->clk = devm_clk_get(&pdev->dev, NULL);
@@ -1507,9 +1685,11 @@ static int stm32_hash_probe(struct platform_device *pdev)
 	case 0:
 		break;
 	case -ENOENT:
-		dev_dbg(dev, "DMA mode not available\n");
+	case -ENODEV:
+		dev_info(dev, "DMA mode not available\n");
 		break;
 	default:
+		dev_err(dev, "DMA init error %d\n", ret);
 		goto err_dma;
 	}
 
@@ -1528,7 +1708,11 @@ static int stm32_hash_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_engine_start;
 
-	hdev->dma_mode = stm32_hash_read(hdev, HASH_HWCFGR);
+	if (hdev->pdata->ux500)
+		/* FIXME: implement DMA mode for Ux500 */
+		hdev->dma_mode = 0;
+	else
+		hdev->dma_mode = stm32_hash_read(hdev, HASH_HWCFGR);
 
 	/* Register algos */
 	ret = stm32_hash_register_algs(hdev);

-- 
2.39.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 6/6] crypto: ux500/hash - delete driver

[Linus Walleij]

It turns out we can just modify the newer STM32 HASH driver
to be used with Ux500 and now that we have done that, delete
the old and sparsely maintained Ux500 HASH driver.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- No changes
ChangeLog v1->v2:
- Resending with the rest.
---
 drivers/crypto/Kconfig                |   10 -
 drivers/crypto/Makefile               |    1 -
 drivers/crypto/ux500/Kconfig          |   22 -
 drivers/crypto/ux500/Makefile         |    7 -
 drivers/crypto/ux500/hash/Makefile    |   11 -
 drivers/crypto/ux500/hash/hash_alg.h  |  398 -------
 drivers/crypto/ux500/hash/hash_core.c | 1966 ---------------------------------
 7 files changed, 2415 deletions(-)

diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index dfb103f81a64..3b2516d1433f 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -390,16 +390,6 @@ if CRYPTO_DEV_NX
 	source "drivers/crypto/nx/Kconfig"
 endif
 
-config CRYPTO_DEV_UX500
-	tristate "Driver for ST-Ericsson UX500 crypto hardware acceleration"
-	depends on ARCH_U8500
-	help
-	  Driver for ST-Ericsson UX500 crypto engine.
-
-if CRYPTO_DEV_UX500
-	source "drivers/crypto/ux500/Kconfig"
-endif # if CRYPTO_DEV_UX500
-
 config CRYPTO_DEV_ATMEL_AUTHENC
 	bool "Support for Atmel IPSEC/SSL hw accelerator"
 	depends on ARCH_AT91 || COMPILE_TEST
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index fa8bf1be1a8c..476f1a25ca32 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -43,7 +43,6 @@ obj-$(CONFIG_CRYPTO_DEV_SAHARA) += sahara.o
 obj-$(CONFIG_CRYPTO_DEV_SL3516) += gemini/
 obj-y += stm32/
 obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
-obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/
 obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio/
 obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/
 obj-$(CONFIG_CRYPTO_DEV_BCM_SPU) += bcm/
diff --git a/drivers/crypto/ux500/Kconfig b/drivers/crypto/ux500/Kconfig
deleted file mode 100644
index dcbd7404768f..000000000000
--- a/drivers/crypto/ux500/Kconfig
+++ /dev/null
@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Copyright (C) ST-Ericsson SA 2010
-# Author: Shujuan Chen (shujuan.chen@stericsson.com)
-#
-
-config CRYPTO_DEV_UX500_HASH
-	tristate "UX500 crypto driver for HASH block"
-	depends on CRYPTO_DEV_UX500
-	select CRYPTO_HASH
-	select CRYPTO_SHA1
-	select CRYPTO_SHA256
-	help
-	  This selects the hash driver for the UX500_HASH hardware.
-	  Depends on UX500/STM DMA if running in DMA mode.
-
-config CRYPTO_DEV_UX500_DEBUG
-	bool "Activate ux500 platform debug-mode for crypto and hash block"
-	depends on CRYPTO_DEV_UX500_CRYP || CRYPTO_DEV_UX500_HASH
-	help
-	  Say Y if you want to add debug prints to ux500_hash and
-	  ux500_cryp devices.
diff --git a/drivers/crypto/ux500/Makefile b/drivers/crypto/ux500/Makefile
deleted file mode 100644
index f1aa4edf66f4..000000000000
--- a/drivers/crypto/ux500/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Copyright (C) ST-Ericsson SA 2010
-# Author: Shujuan Chen (shujuan.chen@stericsson.com)
-#
-
-obj-$(CONFIG_CRYPTO_DEV_UX500_HASH) += hash/
diff --git a/drivers/crypto/ux500/hash/Makefile b/drivers/crypto/ux500/hash/Makefile
deleted file mode 100644
index a8f088724772..000000000000
--- a/drivers/crypto/ux500/hash/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Copyright (C) ST-Ericsson SA 2010
-# Author: Shujuan Chen (shujuan.chen@stericsson.com)
-#
-ifdef CONFIG_CRYPTO_DEV_UX500_DEBUG
-CFLAGS_hash_core.o := -DDEBUG
-endif
-
-obj-$(CONFIG_CRYPTO_DEV_UX500_HASH) += ux500_hash.o
-ux500_hash-objs :=  hash_core.o
diff --git a/drivers/crypto/ux500/hash/hash_alg.h b/drivers/crypto/ux500/hash/hash_alg.h
deleted file mode 100644
index 7c9bcc15125f..000000000000
--- a/drivers/crypto/ux500/hash/hash_alg.h
+++ /dev/null
@@ -1,398 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Shujuan Chen (shujuan.chen@stericsson.com)
- * Author: Joakim Bech (joakim.xx.bech@stericsson.com)
- * Author: Berne Hebark (berne.hebark@stericsson.com))
- */
-#ifndef _HASH_ALG_H
-#define _HASH_ALG_H
-
-#include <linux/bitops.h>
-
-#define HASH_BLOCK_SIZE			64
-#define HASH_DMA_FIFO			4
-#define HASH_DMA_ALIGN_SIZE		4
-#define HASH_DMA_PERFORMANCE_MIN_SIZE	1024
-#define HASH_BYTES_PER_WORD		4
-
-/* Maximum value of the length's high word */
-#define HASH_HIGH_WORD_MAX_VAL		0xFFFFFFFFUL
-
-/* Power on Reset values HASH registers */
-#define HASH_RESET_CR_VALUE		0x0
-#define HASH_RESET_STR_VALUE		0x0
-
-/* Number of context swap registers */
-#define HASH_CSR_COUNT			52
-
-#define HASH_RESET_CSRX_REG_VALUE	0x0
-#define HASH_RESET_CSFULL_REG_VALUE	0x0
-#define HASH_RESET_CSDATAIN_REG_VALUE	0x0
-
-#define HASH_RESET_INDEX_VAL		0x0
-#define HASH_RESET_BIT_INDEX_VAL	0x0
-#define HASH_RESET_BUFFER_VAL		0x0
-#define HASH_RESET_LEN_HIGH_VAL		0x0
-#define HASH_RESET_LEN_LOW_VAL		0x0
-
-/* Control register bitfields */
-#define HASH_CR_RESUME_MASK	0x11FCF
-
-#define HASH_CR_SWITCHON_POS	31
-#define HASH_CR_SWITCHON_MASK	BIT(31)
-
-#define HASH_CR_EMPTYMSG_POS	20
-#define HASH_CR_EMPTYMSG_MASK	BIT(20)
-
-#define HASH_CR_DINF_POS	12
-#define HASH_CR_DINF_MASK	BIT(12)
-
-#define HASH_CR_NBW_POS		8
-#define HASH_CR_NBW_MASK	0x00000F00UL
-
-#define HASH_CR_LKEY_POS	16
-#define HASH_CR_LKEY_MASK	BIT(16)
-
-#define HASH_CR_ALGO_POS	7
-#define HASH_CR_ALGO_MASK	BIT(7)
-
-#define HASH_CR_MODE_POS	6
-#define HASH_CR_MODE_MASK	BIT(6)
-
-#define HASH_CR_DATAFORM_POS	4
-#define HASH_CR_DATAFORM_MASK	(BIT(4) | BIT(5))
-
-#define HASH_CR_DMAE_POS	3
-#define HASH_CR_DMAE_MASK	BIT(3)
-
-#define HASH_CR_INIT_POS	2
-#define HASH_CR_INIT_MASK	BIT(2)
-
-#define HASH_CR_PRIVN_POS	1
-#define HASH_CR_PRIVN_MASK	BIT(1)
-
-#define HASH_CR_SECN_POS	0
-#define HASH_CR_SECN_MASK	BIT(0)
-
-/* Start register bitfields */
-#define HASH_STR_DCAL_POS	8
-#define HASH_STR_DCAL_MASK	BIT(8)
-#define HASH_STR_DEFAULT	0x0
-
-#define HASH_STR_NBLW_POS	0
-#define HASH_STR_NBLW_MASK	0x0000001FUL
-
-#define HASH_NBLW_MAX_VAL	0x1F
-
-/* PrimeCell IDs */
-#define HASH_P_ID0		0xE0
-#define HASH_P_ID1		0x05
-#define HASH_P_ID2		0x38
-#define HASH_P_ID3		0x00
-#define HASH_CELL_ID0		0x0D
-#define HASH_CELL_ID1		0xF0
-#define HASH_CELL_ID2		0x05
-#define HASH_CELL_ID3		0xB1
-
-#define HASH_SET_BITS(reg_name, mask)	\
-	writel_relaxed((readl_relaxed(reg_name) | mask), reg_name)
-
-#define HASH_CLEAR_BITS(reg_name, mask)	\
-	writel_relaxed((readl_relaxed(reg_name) & ~mask), reg_name)
-
-#define HASH_PUT_BITS(reg, val, shift, mask)	\
-	writel_relaxed(((readl(reg) & ~(mask)) |	\
-		(((u32)val << shift) & (mask))), reg)
-
-#define HASH_SET_DIN(val, len)	writesl(&device_data->base->din, (val), (len))
-
-#define HASH_INITIALIZE			\
-	HASH_PUT_BITS(			\
-		&device_data->base->cr,	\
-		0x01, HASH_CR_INIT_POS,	\
-		HASH_CR_INIT_MASK)
-
-#define HASH_SET_DATA_FORMAT(data_format)				\
-		HASH_PUT_BITS(						\
-			&device_data->base->cr,				\
-			(u32) (data_format), HASH_CR_DATAFORM_POS,	\
-			HASH_CR_DATAFORM_MASK)
-#define HASH_SET_NBLW(val)					\
-		HASH_PUT_BITS(					\
-			&device_data->base->str,		\
-			(u32) (val), HASH_STR_NBLW_POS,		\
-			HASH_STR_NBLW_MASK)
-#define HASH_SET_DCAL					\
-		HASH_PUT_BITS(				\
-			&device_data->base->str,	\
-			0x01, HASH_STR_DCAL_POS,	\
-			HASH_STR_DCAL_MASK)
-
-/* Hardware access method */
-enum hash_mode {
-	HASH_MODE_CPU,
-	HASH_MODE_DMA
-};
-
-/**
- * struct uint64 - Structure to handle 64 bits integers.
- * @high_word:	Most significant bits.
- * @low_word:	Least significant bits.
- *
- * Used to handle 64 bits integers.
- */
-struct uint64 {
-	u32 high_word;
-	u32 low_word;
-};
-
-/**
- * struct hash_register - Contains all registers in ux500 hash hardware.
- * @cr:		HASH control register (0x000).
- * @din:	HASH data input register (0x004).
- * @str:	HASH start register (0x008).
- * @hx:		HASH digest register 0..7 (0x00c-0x01C).
- * @padding0:	Reserved (0x02C).
- * @itcr:	Integration test control register (0x080).
- * @itip:	Integration test input register (0x084).
- * @itop:	Integration test output register (0x088).
- * @padding1:	Reserved (0x08C).
- * @csfull:	HASH context full register (0x0F8).
- * @csdatain:	HASH context swap data input register (0x0FC).
- * @csrx:	HASH context swap register 0..51 (0x100-0x1CC).
- * @padding2:	Reserved (0x1D0).
- * @periphid0:	HASH peripheral identification register 0 (0xFE0).
- * @periphid1:	HASH peripheral identification register 1 (0xFE4).
- * @periphid2:	HASH peripheral identification register 2 (0xFE8).
- * @periphid3:	HASH peripheral identification register 3 (0xFEC).
- * @cellid0:	HASH PCell identification register 0 (0xFF0).
- * @cellid1:	HASH PCell identification register 1 (0xFF4).
- * @cellid2:	HASH PCell identification register 2 (0xFF8).
- * @cellid3:	HASH PCell identification register 3 (0xFFC).
- *
- * The device communicates to the HASH via 32-bit-wide control registers
- * accessible via the 32-bit width AMBA rev. 2.0 AHB Bus. Below is a structure
- * with the registers used.
- */
-struct hash_register {
-	u32 cr;
-	u32 din;
-	u32 str;
-	u32 hx[8];
-
-	u32 padding0[(0x080 - 0x02C) / sizeof(u32)];
-
-	u32 itcr;
-	u32 itip;
-	u32 itop;
-
-	u32 padding1[(0x0F8 - 0x08C) / sizeof(u32)];
-
-	u32 csfull;
-	u32 csdatain;
-	u32 csrx[HASH_CSR_COUNT];
-
-	u32 padding2[(0xFE0 - 0x1D0) / sizeof(u32)];
-
-	u32 periphid0;
-	u32 periphid1;
-	u32 periphid2;
-	u32 periphid3;
-
-	u32 cellid0;
-	u32 cellid1;
-	u32 cellid2;
-	u32 cellid3;
-};
-
-/**
- * struct hash_state - Hash context state.
- * @temp_cr:	Temporary HASH Control Register.
- * @str_reg:	HASH Start Register.
- * @din_reg:	HASH Data Input Register.
- * @csr[52]:	HASH Context Swap Registers 0-39.
- * @csfull:	HASH Context Swap Registers 40 ie Status flags.
- * @csdatain:	HASH Context Swap Registers 41 ie Input data.
- * @buffer:	Working buffer for messages going to the hardware.
- * @length:	Length of the part of message hashed so far (floor(N/64) * 64).
- * @index:	Valid number of bytes in buffer (N % 64).
- * @bit_index:	Valid number of bits in buffer (N % 8).
- *
- * This structure is used between context switches, i.e. when ongoing jobs are
- * interupted with new jobs. When this happens we need to store intermediate
- * results in software.
- *
- * WARNING: "index" is the  member of the structure, to be sure  that "buffer"
- * is aligned on a 4-bytes boundary. This is highly implementation dependent
- * and MUST be checked whenever this code is ported on new platforms.
- */
-struct hash_state {
-	u32		temp_cr;
-	u32		str_reg;
-	u32		din_reg;
-	u32		csr[52];
-	u32		csfull;
-	u32		csdatain;
-	u32		buffer[HASH_BLOCK_SIZE / sizeof(u32)];
-	struct uint64	length;
-	u8		index;
-	u8		bit_index;
-};
-
-/**
- * enum hash_device_id - HASH device ID.
- * @HASH_DEVICE_ID_0: Hash hardware with ID 0
- * @HASH_DEVICE_ID_1: Hash hardware with ID 1
- */
-enum hash_device_id {
-	HASH_DEVICE_ID_0 = 0,
-	HASH_DEVICE_ID_1 = 1
-};
-
-/**
- * enum hash_data_format - HASH data format.
- * @HASH_DATA_32_BITS:	32 bits data format
- * @HASH_DATA_16_BITS:	16 bits data format
- * @HASH_DATA_8_BITS:	8 bits data format.
- * @HASH_DATA_1_BITS:	1 bit data format.
- */
-enum hash_data_format {
-	HASH_DATA_32_BITS	= 0x0,
-	HASH_DATA_16_BITS	= 0x1,
-	HASH_DATA_8_BITS	= 0x2,
-	HASH_DATA_1_BIT		= 0x3
-};
-
-/**
- * enum hash_algo - Enumeration for selecting between SHA1 or SHA2 algorithm.
- * @HASH_ALGO_SHA1: Indicates that SHA1 is used.
- * @HASH_ALGO_SHA2: Indicates that SHA2 (SHA256) is used.
- */
-enum hash_algo {
-	HASH_ALGO_SHA1		= 0x0,
-	HASH_ALGO_SHA256	= 0x1
-};
-
-/**
- * enum hash_op - Enumeration for selecting between HASH or HMAC mode.
- * @HASH_OPER_MODE_HASH: Indicates usage of normal HASH mode.
- * @HASH_OPER_MODE_HMAC: Indicates usage of HMAC.
- */
-enum hash_op {
-	HASH_OPER_MODE_HASH = 0x0,
-	HASH_OPER_MODE_HMAC = 0x1
-};
-
-/**
- * struct hash_config - Configuration data for the hardware.
- * @data_format:	Format of data entered into the hash data in register.
- * @algorithm:		Algorithm selection bit.
- * @oper_mode:		Operating mode selection bit.
- */
-struct hash_config {
-	int data_format;
-	int algorithm;
-	int oper_mode;
-};
-
-/**
- * struct hash_dma - Structure used for dma.
- * @mask:		DMA capabilities bitmap mask.
- * @complete:		Used to maintain state for a "completion".
- * @chan_mem2hash:	DMA channel.
- * @cfg_mem2hash:	DMA channel configuration.
- * @sg_len:		Scatterlist length.
- * @sg:			Scatterlist.
- * @nents:		Number of sg entries.
- */
-struct hash_dma {
-	dma_cap_mask_t		mask;
-	struct completion	complete;
-	struct dma_chan		*chan_mem2hash;
-	void			*cfg_mem2hash;
-	int			sg_len;
-	struct scatterlist	*sg;
-	int			nents;
-};
-
-/**
- * struct hash_ctx - The context used for hash calculations.
- * @key:	The key used in the operation.
- * @keylen:	The length of the key.
- * @state:	The state of the current calculations.
- * @config:	The current configuration.
- * @digestsize:	The size of current digest.
- * @device:	Pointer to the device structure.
- */
-struct hash_ctx {
-	u8			*key;
-	u32			keylen;
-	struct hash_config	config;
-	int			digestsize;
-	struct hash_device_data	*device;
-};
-
-/**
- * struct hash_ctx - The request context used for hash calculations.
- * @state:	The state of the current calculations.
- * @dma_mode:	Used in special cases (workaround), e.g. need to change to
- *		cpu mode, if not supported/working in dma mode.
- * @updated:	Indicates if hardware is initialized for new operations.
- */
-struct hash_req_ctx {
-	struct hash_state	state;
-	bool			dma_mode;
-	u8			updated;
-};
-
-/**
- * struct hash_device_data - structure for a hash device.
- * @base:		Pointer to virtual base address of the hash device.
- * @phybase:		Pointer to physical memory location of the hash device.
- * @list_node:		For inclusion in klist.
- * @dev:		Pointer to the device dev structure.
- * @ctx_lock:		Spinlock for current_ctx.
- * @current_ctx:	Pointer to the currently allocated context.
- * @power_state:	TRUE = power state on, FALSE = power state off.
- * @power_state_lock:	Spinlock for power_state.
- * @regulator:		Pointer to the device's power control.
- * @clk:		Pointer to the device's clock control.
- * @restore_dev_state:	TRUE = saved state, FALSE = no saved state.
- * @dma:		Structure used for dma.
- */
-struct hash_device_data {
-	struct hash_register __iomem	*base;
-	phys_addr_t             phybase;
-	struct klist_node	list_node;
-	struct device		*dev;
-	spinlock_t		ctx_lock;
-	struct hash_ctx		*current_ctx;
-	bool			power_state;
-	spinlock_t		power_state_lock;
-	struct regulator	*regulator;
-	struct clk		*clk;
-	bool			restore_dev_state;
-	struct hash_state	state; /* Used for saving and resuming state */
-	struct hash_dma		dma;
-};
-
-int hash_check_hw(struct hash_device_data *device_data);
-
-int hash_setconfiguration(struct hash_device_data *device_data,
-		struct hash_config *config);
-
-void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx);
-
-void hash_get_digest(struct hash_device_data *device_data,
-		u8 *digest, int algorithm);
-
-int hash_hw_update(struct ahash_request *req);
-
-int hash_save_state(struct hash_device_data *device_data,
-		struct hash_state *state);
-
-int hash_resume_state(struct hash_device_data *device_data,
-		const struct hash_state *state);
-
-#endif
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
deleted file mode 100644
index f104e8a43036..000000000000
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ /dev/null
@@ -1,1966 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Cryptographic API.
- * Support for Nomadik hardware crypto engine.
-
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson
- * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson
- * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson.
- * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson.
- * Author: Andreas Westin <andreas.westin@stericsson.com> for ST-Ericsson.
- */
-
-#define pr_fmt(fmt) "hashX hashX: " fmt
-
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/klist.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/platform_device.h>
-#include <linux/crypto.h>
-
-#include <linux/regulator/consumer.h>
-#include <linux/dmaengine.h>
-#include <linux/bitops.h>
-
-#include <crypto/internal/hash.h>
-#include <crypto/sha1.h>
-#include <crypto/sha2.h>
-#include <crypto/scatterwalk.h>
-#include <crypto/algapi.h>
-
-#include <linux/platform_data/crypto-ux500.h>
-
-#include "hash_alg.h"
-
-static int hash_mode;
-module_param(hash_mode, int, 0);
-MODULE_PARM_DESC(hash_mode, "CPU or DMA mode. CPU = 0 (default), DMA = 1");
-
-/* HMAC-SHA1, no key */
-static const u8 zero_message_hmac_sha1[SHA1_DIGEST_SIZE] = {
-	0xfb, 0xdb, 0x1d, 0x1b, 0x18, 0xaa, 0x6c, 0x08,
-	0x32, 0x4b, 0x7d, 0x64, 0xb7, 0x1f, 0xb7, 0x63,
-	0x70, 0x69, 0x0e, 0x1d
-};
-
-/* HMAC-SHA256, no key */
-static const u8 zero_message_hmac_sha256[SHA256_DIGEST_SIZE] = {
-	0xb6, 0x13, 0x67, 0x9a, 0x08, 0x14, 0xd9, 0xec,
-	0x77, 0x2f, 0x95, 0xd7, 0x78, 0xc3, 0x5f, 0xc5,
-	0xff, 0x16, 0x97, 0xc4, 0x93, 0x71, 0x56, 0x53,
-	0xc6, 0xc7, 0x12, 0x14, 0x42, 0x92, 0xc5, 0xad
-};
-
-/**
- * struct hash_driver_data - data specific to the driver.
- *
- * @device_list:	A list of registered devices to choose from.
- * @device_allocation:	A semaphore initialized with number of devices.
- */
-struct hash_driver_data {
-	struct klist		device_list;
-	struct semaphore	device_allocation;
-};
-
-static struct hash_driver_data	driver_data;
-
-/* Declaration of functions */
-/**
- * hash_messagepad - Pads a message and write the nblw bits.
- * @device_data:	Structure for the hash device.
- * @message:		Last word of a message
- * @index_bytes:	The number of bytes in the last message
- *
- * This function manages the final part of the digest calculation, when less
- * than 512 bits (64 bytes) remain in message. This means index_bytes < 64.
- *
- */
-static void hash_messagepad(struct hash_device_data *device_data,
-			    const u32 *message, u8 index_bytes);
-
-/**
- * release_hash_device - Releases a previously allocated hash device.
- * @device_data:	Structure for the hash device.
- *
- */
-static void release_hash_device(struct hash_device_data *device_data)
-{
-	spin_lock(&device_data->ctx_lock);
-	device_data->current_ctx->device = NULL;
-	device_data->current_ctx = NULL;
-	spin_unlock(&device_data->ctx_lock);
-
-	/*
-	 * The down_interruptible part for this semaphore is called in
-	 * cryp_get_device_data.
-	 */
-	up(&driver_data.device_allocation);
-}
-
-static void hash_dma_setup_channel(struct hash_device_data *device_data,
-				   struct device *dev)
-{
-	struct hash_platform_data *platform_data = dev->platform_data;
-	struct dma_slave_config conf = {
-		.direction = DMA_MEM_TO_DEV,
-		.dst_addr = device_data->phybase + HASH_DMA_FIFO,
-		.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
-		.dst_maxburst = 16,
-	};
-
-	dma_cap_zero(device_data->dma.mask);
-	dma_cap_set(DMA_SLAVE, device_data->dma.mask);
-
-	device_data->dma.cfg_mem2hash = platform_data->mem_to_engine;
-	device_data->dma.chan_mem2hash =
-		dma_request_channel(device_data->dma.mask,
-				    platform_data->dma_filter,
-				    device_data->dma.cfg_mem2hash);
-
-	dmaengine_slave_config(device_data->dma.chan_mem2hash, &conf);
-
-	init_completion(&device_data->dma.complete);
-}
-
-static void hash_dma_callback(void *data)
-{
-	struct hash_ctx *ctx = data;
-
-	complete(&ctx->device->dma.complete);
-}
-
-static int hash_set_dma_transfer(struct hash_ctx *ctx, struct scatterlist *sg,
-				 int len, enum dma_data_direction direction)
-{
-	struct dma_async_tx_descriptor *desc = NULL;
-	struct dma_chan *channel = NULL;
-
-	if (direction != DMA_TO_DEVICE) {
-		dev_err(ctx->device->dev, "%s: Invalid DMA direction\n",
-			__func__);
-		return -EFAULT;
-	}
-
-	sg->length = ALIGN(sg->length, HASH_DMA_ALIGN_SIZE);
-
-	channel = ctx->device->dma.chan_mem2hash;
-	ctx->device->dma.sg = sg;
-	ctx->device->dma.sg_len = dma_map_sg(channel->device->dev,
-			ctx->device->dma.sg, ctx->device->dma.nents,
-			direction);
-
-	if (!ctx->device->dma.sg_len) {
-		dev_err(ctx->device->dev, "%s: Could not map the sg list (TO_DEVICE)\n",
-			__func__);
-		return -EFAULT;
-	}
-
-	dev_dbg(ctx->device->dev, "%s: Setting up DMA for buffer (TO_DEVICE)\n",
-		__func__);
-	desc = dmaengine_prep_slave_sg(channel,
-			ctx->device->dma.sg, ctx->device->dma.sg_len,
-			DMA_MEM_TO_DEV, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
-	if (!desc) {
-		dev_err(ctx->device->dev,
-			"%s: dmaengine_prep_slave_sg() failed!\n", __func__);
-		return -EFAULT;
-	}
-
-	desc->callback = hash_dma_callback;
-	desc->callback_param = ctx;
-
-	dmaengine_submit(desc);
-	dma_async_issue_pending(channel);
-
-	return 0;
-}
-
-static void hash_dma_done(struct hash_ctx *ctx)
-{
-	struct dma_chan *chan;
-
-	chan = ctx->device->dma.chan_mem2hash;
-	dmaengine_terminate_all(chan);
-	dma_unmap_sg(chan->device->dev, ctx->device->dma.sg,
-		     ctx->device->dma.nents, DMA_TO_DEVICE);
-}
-
-static int hash_dma_write(struct hash_ctx *ctx,
-			  struct scatterlist *sg, int len)
-{
-	int error = hash_set_dma_transfer(ctx, sg, len, DMA_TO_DEVICE);
-	if (error) {
-		dev_dbg(ctx->device->dev,
-			"%s: hash_set_dma_transfer() failed\n", __func__);
-		return error;
-	}
-
-	return len;
-}
-
-/**
- * get_empty_message_digest - Returns a pre-calculated digest for
- * the empty message.
- * @device_data:	Structure for the hash device.
- * @zero_hash:		Buffer to return the empty message digest.
- * @zero_hash_size:	Hash size of the empty message digest.
- * @zero_digest:	True if zero_digest returned.
- */
-static int get_empty_message_digest(
-		struct hash_device_data *device_data,
-		u8 *zero_hash, u32 *zero_hash_size, bool *zero_digest)
-{
-	int ret = 0;
-	struct hash_ctx *ctx = device_data->current_ctx;
-	*zero_digest = false;
-
-	/**
-	 * Caller responsible for ctx != NULL.
-	 */
-
-	if (HASH_OPER_MODE_HASH == ctx->config.oper_mode) {
-		if (HASH_ALGO_SHA1 == ctx->config.algorithm) {
-			memcpy(zero_hash, &sha1_zero_message_hash[0],
-			       SHA1_DIGEST_SIZE);
-			*zero_hash_size = SHA1_DIGEST_SIZE;
-			*zero_digest = true;
-		} else if (HASH_ALGO_SHA256 ==
-				ctx->config.algorithm) {
-			memcpy(zero_hash, &sha256_zero_message_hash[0],
-			       SHA256_DIGEST_SIZE);
-			*zero_hash_size = SHA256_DIGEST_SIZE;
-			*zero_digest = true;
-		} else {
-			dev_err(device_data->dev, "%s: Incorrect algorithm!\n",
-				__func__);
-			ret = -EINVAL;
-			goto out;
-		}
-	} else if (HASH_OPER_MODE_HMAC == ctx->config.oper_mode) {
-		if (!ctx->keylen) {
-			if (HASH_ALGO_SHA1 == ctx->config.algorithm) {
-				memcpy(zero_hash, &zero_message_hmac_sha1[0],
-				       SHA1_DIGEST_SIZE);
-				*zero_hash_size = SHA1_DIGEST_SIZE;
-				*zero_digest = true;
-			} else if (HASH_ALGO_SHA256 == ctx->config.algorithm) {
-				memcpy(zero_hash, &zero_message_hmac_sha256[0],
-				       SHA256_DIGEST_SIZE);
-				*zero_hash_size = SHA256_DIGEST_SIZE;
-				*zero_digest = true;
-			} else {
-				dev_err(device_data->dev, "%s: Incorrect algorithm!\n",
-					__func__);
-				ret = -EINVAL;
-				goto out;
-			}
-		} else {
-			dev_dbg(device_data->dev,
-				"%s: Continue hash calculation, since hmac key available\n",
-				__func__);
-		}
-	}
-out:
-
-	return ret;
-}
-
-/**
- * hash_disable_power - Request to disable power and clock.
- * @device_data:	Structure for the hash device.
- * @save_device_state:	If true, saves the current hw state.
- *
- * This function request for disabling power (regulator) and clock,
- * and could also save current hw state.
- */
-static int hash_disable_power(struct hash_device_data *device_data,
-			      bool save_device_state)
-{
-	int ret = 0;
-	struct device *dev = device_data->dev;
-
-	spin_lock(&device_data->power_state_lock);
-	if (!device_data->power_state)
-		goto out;
-
-	if (save_device_state) {
-		hash_save_state(device_data,
-				&device_data->state);
-		device_data->restore_dev_state = true;
-	}
-
-	clk_disable(device_data->clk);
-	ret = regulator_disable(device_data->regulator);
-	if (ret)
-		dev_err(dev, "%s: regulator_disable() failed!\n", __func__);
-
-	device_data->power_state = false;
-
-out:
-	spin_unlock(&device_data->power_state_lock);
-
-	return ret;
-}
-
-/**
- * hash_enable_power - Request to enable power and clock.
- * @device_data:		Structure for the hash device.
- * @restore_device_state:	If true, restores a previous saved hw state.
- *
- * This function request for enabling power (regulator) and clock,
- * and could also restore a previously saved hw state.
- */
-static int hash_enable_power(struct hash_device_data *device_data,
-			     bool restore_device_state)
-{
-	int ret = 0;
-	struct device *dev = device_data->dev;
-
-	spin_lock(&device_data->power_state_lock);
-	if (!device_data->power_state) {
-		ret = regulator_enable(device_data->regulator);
-		if (ret) {
-			dev_err(dev, "%s: regulator_enable() failed!\n",
-				__func__);
-			goto out;
-		}
-		ret = clk_enable(device_data->clk);
-		if (ret) {
-			dev_err(dev, "%s: clk_enable() failed!\n", __func__);
-			ret = regulator_disable(
-					device_data->regulator);
-			goto out;
-		}
-		device_data->power_state = true;
-	}
-
-	if (device_data->restore_dev_state) {
-		if (restore_device_state) {
-			device_data->restore_dev_state = false;
-			hash_resume_state(device_data, &device_data->state);
-		}
-	}
-out:
-	spin_unlock(&device_data->power_state_lock);
-
-	return ret;
-}
-
-/**
- * hash_get_device_data - Checks for an available hash device and return it.
- * @ctx:		Structure for the hash context.
- * @device_data:	Structure for the hash device.
- *
- * This function check for an available hash device and return it to
- * the caller.
- * Note! Caller need to release the device, calling up().
- */
-static int hash_get_device_data(struct hash_ctx *ctx,
-				struct hash_device_data **device_data)
-{
-	int			ret;
-	struct klist_iter	device_iterator;
-	struct klist_node	*device_node;
-	struct hash_device_data *local_device_data = NULL;
-
-	/* Wait until a device is available */
-	ret = down_interruptible(&driver_data.device_allocation);
-	if (ret)
-		return ret;  /* Interrupted */
-
-	/* Select a device */
-	klist_iter_init(&driver_data.device_list, &device_iterator);
-	device_node = klist_next(&device_iterator);
-	while (device_node) {
-		local_device_data = container_of(device_node,
-					   struct hash_device_data, list_node);
-		spin_lock(&local_device_data->ctx_lock);
-		/* current_ctx allocates a device, NULL = unallocated */
-		if (local_device_data->current_ctx) {
-			device_node = klist_next(&device_iterator);
-		} else {
-			local_device_data->current_ctx = ctx;
-			ctx->device = local_device_data;
-			spin_unlock(&local_device_data->ctx_lock);
-			break;
-		}
-		spin_unlock(&local_device_data->ctx_lock);
-	}
-	klist_iter_exit(&device_iterator);
-
-	if (!device_node) {
-		/**
-		 * No free device found.
-		 * Since we allocated a device with down_interruptible, this
-		 * should not be able to happen.
-		 * Number of available devices, which are contained in
-		 * device_allocation, is therefore decremented by not doing
-		 * an up(device_allocation).
-		 */
-		return -EBUSY;
-	}
-
-	*device_data = local_device_data;
-
-	return 0;
-}
-
-/**
- * hash_hw_write_key - Writes the key to the hardware registries.
- *
- * @device_data:	Structure for the hash device.
- * @key:		Key to be written.
- * @keylen:		The lengt of the key.
- *
- * Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the hw design spec. Either due to incorrect info in the
- * spec or due to a bug in the hw.
- */
-static void hash_hw_write_key(struct hash_device_data *device_data,
-			      const u8 *key, unsigned int keylen)
-{
-	u32 word = 0;
-	int nwords = 1;
-
-	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
-
-	while (keylen >= 4) {
-		u32 *key_word = (u32 *)key;
-
-		HASH_SET_DIN(key_word, nwords);
-		keylen -= 4;
-		key += 4;
-	}
-
-	/* Take care of the remaining bytes in the last word */
-	if (keylen) {
-		word = 0;
-		while (keylen) {
-			word |= (key[keylen - 1] << (8 * (keylen - 1)));
-			keylen--;
-		}
-
-		HASH_SET_DIN(&word, nwords);
-	}
-
-	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-		cpu_relax();
-
-	HASH_SET_DCAL;
-
-	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-		cpu_relax();
-}
-
-/**
- * init_hash_hw - Initialise the hash hardware for a new calculation.
- * @device_data:	Structure for the hash device.
- * @ctx:		The hash context.
- *
- * This function will enable the bits needed to clear and start a new
- * calculation.
- */
-static int init_hash_hw(struct hash_device_data *device_data,
-			struct hash_ctx *ctx)
-{
-	int ret = 0;
-
-	ret = hash_setconfiguration(device_data, &ctx->config);
-	if (ret) {
-		dev_err(device_data->dev, "%s: hash_setconfiguration() failed!\n",
-			__func__);
-		return ret;
-	}
-
-	hash_begin(device_data, ctx);
-
-	if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC)
-		hash_hw_write_key(device_data, ctx->key, ctx->keylen);
-
-	return ret;
-}
-
-/**
- * hash_get_nents - Return number of entries (nents) in scatterlist (sg).
- *
- * @sg:		Scatterlist.
- * @size:	Size in bytes.
- * @aligned:	True if sg data aligned to work in DMA mode.
- *
- */
-static int hash_get_nents(struct scatterlist *sg, int size, bool *aligned)
-{
-	int nents = 0;
-	bool aligned_data = true;
-
-	while (size > 0 && sg) {
-		nents++;
-		size -= sg->length;
-
-		/* hash_set_dma_transfer will align last nent */
-		if ((aligned && !IS_ALIGNED(sg->offset, HASH_DMA_ALIGN_SIZE)) ||
-		    (!IS_ALIGNED(sg->length, HASH_DMA_ALIGN_SIZE) && size > 0))
-			aligned_data = false;
-
-		sg = sg_next(sg);
-	}
-
-	if (aligned)
-		*aligned = aligned_data;
-
-	if (size != 0)
-		return -EFAULT;
-
-	return nents;
-}
-
-/**
- * hash_dma_valid_data - checks for dma valid sg data.
- * @sg:		Scatterlist.
- * @datasize:	Datasize in bytes.
- *
- * NOTE! This function checks for dma valid sg data, since dma
- * only accept datasizes of even wordsize.
- */
-static bool hash_dma_valid_data(struct scatterlist *sg, int datasize)
-{
-	bool aligned;
-
-	/* Need to include at least one nent, else error */
-	if (hash_get_nents(sg, datasize, &aligned) < 1)
-		return false;
-
-	return aligned;
-}
-
-/**
- * ux500_hash_init - Common hash init function for SHA1/SHA2 (SHA256).
- * @req: The hash request for the job.
- *
- * Initialize structures.
- */
-static int ux500_hash_init(struct ahash_request *req)
-{
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
-
-	if (!ctx->key)
-		ctx->keylen = 0;
-
-	memset(&req_ctx->state, 0, sizeof(struct hash_state));
-	req_ctx->updated = 0;
-	if (hash_mode == HASH_MODE_DMA) {
-		if (req->nbytes < HASH_DMA_ALIGN_SIZE) {
-			req_ctx->dma_mode = false; /* Don't use DMA */
-
-			pr_debug("%s: DMA mode, but direct to CPU mode for data size < %d\n",
-				 __func__, HASH_DMA_ALIGN_SIZE);
-		} else {
-			if (req->nbytes >= HASH_DMA_PERFORMANCE_MIN_SIZE &&
-			    hash_dma_valid_data(req->src, req->nbytes)) {
-				req_ctx->dma_mode = true;
-			} else {
-				req_ctx->dma_mode = false;
-				pr_debug("%s: DMA mode, but use CPU mode for datalength < %d or non-aligned data, except in last nent\n",
-					 __func__,
-					 HASH_DMA_PERFORMANCE_MIN_SIZE);
-			}
-		}
-	}
-	return 0;
-}
-
-/**
- * hash_processblock - This function processes a single block of 512 bits (64
- *                     bytes), word aligned, starting at message.
- * @device_data:	Structure for the hash device.
- * @message:		Block (512 bits) of message to be written to
- *			the HASH hardware.
- * @length:		Message length
- *
- */
-static void hash_processblock(struct hash_device_data *device_data,
-			      const u32 *message, int length)
-{
-	int len = length / HASH_BYTES_PER_WORD;
-	/*
-	 * NBLW bits. Reset the number of bits in last word (NBLW).
-	 */
-	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
-
-	/*
-	 * Write message data to the HASH_DIN register.
-	 */
-	HASH_SET_DIN(message, len);
-}
-
-/**
- * hash_messagepad - Pads a message and write the nblw bits.
- * @device_data:	Structure for the hash device.
- * @message:		Last word of a message.
- * @index_bytes:	The number of bytes in the last message.
- *
- * This function manages the final part of the digest calculation, when less
- * than 512 bits (64 bytes) remain in message. This means index_bytes < 64.
- *
- */
-static void hash_messagepad(struct hash_device_data *device_data,
-			    const u32 *message, u8 index_bytes)
-{
-	int nwords = 1;
-
-	/*
-	 * Clear hash str register, only clear NBLW
-	 * since DCAL will be reset by hardware.
-	 */
-	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
-
-	/* Main loop */
-	while (index_bytes >= 4) {
-		HASH_SET_DIN(message, nwords);
-		index_bytes -= 4;
-		message++;
-	}
-
-	if (index_bytes)
-		HASH_SET_DIN(message, nwords);
-
-	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-		cpu_relax();
-
-	/* num_of_bytes == 0 => NBLW <- 0 (32 bits valid in DATAIN) */
-	HASH_SET_NBLW(index_bytes * 8);
-	dev_dbg(device_data->dev, "%s: DIN=0x%08x NBLW=%lu\n",
-		__func__, readl_relaxed(&device_data->base->din),
-		readl_relaxed(&device_data->base->str) & HASH_STR_NBLW_MASK);
-	HASH_SET_DCAL;
-	dev_dbg(device_data->dev, "%s: after dcal -> DIN=0x%08x NBLW=%lu\n",
-		__func__, readl_relaxed(&device_data->base->din),
-		readl_relaxed(&device_data->base->str) & HASH_STR_NBLW_MASK);
-
-	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-		cpu_relax();
-}
-
-/**
- * hash_incrementlength - Increments the length of the current message.
- * @ctx: Hash context
- * @incr: Length of message processed already
- *
- * Overflow cannot occur, because conditions for overflow are checked in
- * hash_hw_update.
- */
-static void hash_incrementlength(struct hash_req_ctx *ctx, u32 incr)
-{
-	ctx->state.length.low_word += incr;
-
-	/* Check for wrap-around */
-	if (ctx->state.length.low_word < incr)
-		ctx->state.length.high_word++;
-}
-
-/**
- * hash_setconfiguration - Sets the required configuration for the hash
- *                         hardware.
- * @device_data:	Structure for the hash device.
- * @config:		Pointer to a configuration structure.
- */
-int hash_setconfiguration(struct hash_device_data *device_data,
-			  struct hash_config *config)
-{
-	int ret = 0;
-
-	if (config->algorithm != HASH_ALGO_SHA1 &&
-	    config->algorithm != HASH_ALGO_SHA256)
-		return -EPERM;
-
-	/*
-	 * DATAFORM bits. Set the DATAFORM bits to 0b11, which means the data
-	 * to be written to HASH_DIN is considered as 32 bits.
-	 */
-	HASH_SET_DATA_FORMAT(config->data_format);
-
-	/*
-	 * ALGO bit. Set to 0b1 for SHA-1 and 0b0 for SHA-256
-	 */
-	switch (config->algorithm) {
-	case HASH_ALGO_SHA1:
-		HASH_SET_BITS(&device_data->base->cr, HASH_CR_ALGO_MASK);
-		break;
-
-	case HASH_ALGO_SHA256:
-		HASH_CLEAR_BITS(&device_data->base->cr, HASH_CR_ALGO_MASK);
-		break;
-
-	default:
-		dev_err(device_data->dev, "%s: Incorrect algorithm\n",
-			__func__);
-		return -EPERM;
-	}
-
-	/*
-	 * MODE bit. This bit selects between HASH or HMAC mode for the
-	 * selected algorithm. 0b0 = HASH and 0b1 = HMAC.
-	 */
-	if (HASH_OPER_MODE_HASH == config->oper_mode)
-		HASH_CLEAR_BITS(&device_data->base->cr,
-				HASH_CR_MODE_MASK);
-	else if (HASH_OPER_MODE_HMAC == config->oper_mode) {
-		HASH_SET_BITS(&device_data->base->cr, HASH_CR_MODE_MASK);
-		if (device_data->current_ctx->keylen > HASH_BLOCK_SIZE) {
-			/* Truncate key to blocksize */
-			dev_dbg(device_data->dev, "%s: LKEY set\n", __func__);
-			HASH_SET_BITS(&device_data->base->cr,
-				      HASH_CR_LKEY_MASK);
-		} else {
-			dev_dbg(device_data->dev, "%s: LKEY cleared\n",
-				__func__);
-			HASH_CLEAR_BITS(&device_data->base->cr,
-					HASH_CR_LKEY_MASK);
-		}
-	} else {	/* Wrong hash mode */
-		ret = -EPERM;
-		dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
-			__func__);
-	}
-	return ret;
-}
-
-/**
- * hash_begin - This routine resets some globals and initializes the hash
- *              hardware.
- * @device_data:	Structure for the hash device.
- * @ctx:		Hash context.
- */
-void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx)
-{
-	/* HW and SW initializations */
-	/* Note: there is no need to initialize buffer and digest members */
-
-	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-		cpu_relax();
-
-	/*
-	 * INIT bit. Set this bit to 0b1 to reset the HASH processor core and
-	 * prepare the initialize the HASH accelerator to compute the message
-	 * digest of a new message.
-	 */
-	HASH_INITIALIZE;
-
-	/*
-	 * NBLW bits. Reset the number of bits in last word (NBLW).
-	 */
-	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
-}
-
-static int hash_process_data(struct hash_device_data *device_data,
-			     struct hash_ctx *ctx, struct hash_req_ctx *req_ctx,
-			     int msg_length, u8 *data_buffer, u8 *buffer,
-			     u8 *index)
-{
-	int ret = 0;
-	u32 count;
-
-	do {
-		if ((*index + msg_length) < HASH_BLOCK_SIZE) {
-			for (count = 0; count < msg_length; count++) {
-				buffer[*index + count] =
-					*(data_buffer + count);
-			}
-			*index += msg_length;
-			msg_length = 0;
-		} else {
-			if (req_ctx->updated) {
-				ret = hash_resume_state(device_data,
-						&device_data->state);
-				memmove(req_ctx->state.buffer,
-					device_data->state.buffer,
-					HASH_BLOCK_SIZE);
-				if (ret) {
-					dev_err(device_data->dev,
-						"%s: hash_resume_state() failed!\n",
-						__func__);
-					goto out;
-				}
-			} else {
-				ret = init_hash_hw(device_data, ctx);
-				if (ret) {
-					dev_err(device_data->dev,
-						"%s: init_hash_hw() failed!\n",
-						__func__);
-					goto out;
-				}
-				req_ctx->updated = 1;
-			}
-			/*
-			 * If 'data_buffer' is four byte aligned and
-			 * local buffer does not have any data, we can
-			 * write data directly from 'data_buffer' to
-			 * HW peripheral, otherwise we first copy data
-			 * to a local buffer
-			 */
-			if (IS_ALIGNED((unsigned long)data_buffer, 4) &&
-			    (0 == *index))
-				hash_processblock(device_data,
-						  (const u32 *)data_buffer,
-						  HASH_BLOCK_SIZE);
-			else {
-				for (count = 0;
-				     count < (u32)(HASH_BLOCK_SIZE - *index);
-				     count++) {
-					buffer[*index + count] =
-						*(data_buffer + count);
-				}
-				hash_processblock(device_data,
-						  (const u32 *)buffer,
-						  HASH_BLOCK_SIZE);
-			}
-			hash_incrementlength(req_ctx, HASH_BLOCK_SIZE);
-			data_buffer += (HASH_BLOCK_SIZE - *index);
-
-			msg_length -= (HASH_BLOCK_SIZE - *index);
-			*index = 0;
-
-			ret = hash_save_state(device_data,
-					&device_data->state);
-
-			memmove(device_data->state.buffer,
-				req_ctx->state.buffer,
-				HASH_BLOCK_SIZE);
-			if (ret) {
-				dev_err(device_data->dev, "%s: hash_save_state() failed!\n",
-					__func__);
-				goto out;
-			}
-		}
-	} while (msg_length != 0);
-out:
-
-	return ret;
-}
-
-/**
- * hash_dma_final - The hash dma final function for SHA1/SHA256.
- * @req:	The hash request for the job.
- */
-static int hash_dma_final(struct ahash_request *req)
-{
-	int ret = 0;
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
-	struct hash_device_data *device_data;
-	u8 digest[SHA256_DIGEST_SIZE];
-	int bytes_written = 0;
-
-	ret = hash_get_device_data(ctx, &device_data);
-	if (ret)
-		return ret;
-
-	dev_dbg(device_data->dev, "%s: (ctx=0x%lx)!\n", __func__,
-		(unsigned long)ctx);
-
-	if (req_ctx->updated) {
-		ret = hash_resume_state(device_data, &device_data->state);
-
-		if (ret) {
-			dev_err(device_data->dev, "%s: hash_resume_state() failed!\n",
-				__func__);
-			goto out;
-		}
-	} else {
-		ret = hash_setconfiguration(device_data, &ctx->config);
-		if (ret) {
-			dev_err(device_data->dev,
-				"%s: hash_setconfiguration() failed!\n",
-				__func__);
-			goto out;
-		}
-
-		/* Enable DMA input */
-		if (hash_mode != HASH_MODE_DMA || !req_ctx->dma_mode) {
-			HASH_CLEAR_BITS(&device_data->base->cr,
-					HASH_CR_DMAE_MASK);
-		} else {
-			HASH_SET_BITS(&device_data->base->cr,
-				      HASH_CR_DMAE_MASK);
-			HASH_SET_BITS(&device_data->base->cr,
-				      HASH_CR_PRIVN_MASK);
-		}
-
-		HASH_INITIALIZE;
-
-		if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC)
-			hash_hw_write_key(device_data, ctx->key, ctx->keylen);
-
-		/* Number of bits in last word = (nbytes * 8) % 32 */
-		HASH_SET_NBLW((req->nbytes * 8) % 32);
-		req_ctx->updated = 1;
-	}
-
-	/* Store the nents in the dma struct. */
-	ctx->device->dma.nents = hash_get_nents(req->src, req->nbytes, NULL);
-	if (!ctx->device->dma.nents) {
-		dev_err(device_data->dev, "%s: ctx->device->dma.nents = 0\n",
-			__func__);
-		ret = ctx->device->dma.nents;
-		goto out;
-	}
-
-	bytes_written = hash_dma_write(ctx, req->src, req->nbytes);
-	if (bytes_written != req->nbytes) {
-		dev_err(device_data->dev, "%s: hash_dma_write() failed!\n",
-			__func__);
-		ret = bytes_written;
-		goto out;
-	}
-
-	wait_for_completion(&ctx->device->dma.complete);
-	hash_dma_done(ctx);
-
-	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-		cpu_relax();
-
-	if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC && ctx->key) {
-		unsigned int keylen = ctx->keylen;
-		u8 *key = ctx->key;
-
-		dev_dbg(device_data->dev, "%s: keylen: %d\n",
-			__func__, ctx->keylen);
-		hash_hw_write_key(device_data, key, keylen);
-	}
-
-	hash_get_digest(device_data, digest, ctx->config.algorithm);
-	memcpy(req->result, digest, ctx->digestsize);
-
-out:
-	release_hash_device(device_data);
-
-	/**
-	 * Allocated in setkey, and only used in HMAC.
-	 */
-	kfree(ctx->key);
-
-	return ret;
-}
-
-/**
- * hash_hw_final - The final hash calculation function
- * @req:	The hash request for the job.
- */
-static int hash_hw_final(struct ahash_request *req)
-{
-	int ret = 0;
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
-	struct hash_device_data *device_data;
-	u8 digest[SHA256_DIGEST_SIZE];
-
-	ret = hash_get_device_data(ctx, &device_data);
-	if (ret)
-		return ret;
-
-	dev_dbg(device_data->dev, "%s: (ctx=0x%lx)!\n", __func__,
-		(unsigned long)ctx);
-
-	if (req_ctx->updated) {
-		ret = hash_resume_state(device_data, &device_data->state);
-
-		if (ret) {
-			dev_err(device_data->dev,
-				"%s: hash_resume_state() failed!\n", __func__);
-			goto out;
-		}
-	} else if (req->nbytes == 0 && ctx->keylen == 0) {
-		u8 zero_hash[SHA256_DIGEST_SIZE];
-		u32 zero_hash_size = 0;
-		bool zero_digest = false;
-		/**
-		 * Use a pre-calculated empty message digest
-		 * (workaround since hw return zeroes, hw bug!?)
-		 */
-		ret = get_empty_message_digest(device_data, &zero_hash[0],
-				&zero_hash_size, &zero_digest);
-		if (!ret && likely(zero_hash_size == ctx->digestsize) &&
-		    zero_digest) {
-			memcpy(req->result, &zero_hash[0], ctx->digestsize);
-			goto out;
-		} else if (!ret && !zero_digest) {
-			dev_dbg(device_data->dev,
-				"%s: HMAC zero msg with key, continue...\n",
-				__func__);
-		} else {
-			dev_err(device_data->dev,
-				"%s: ret=%d, or wrong digest size? %s\n",
-				__func__, ret,
-				zero_hash_size == ctx->digestsize ?
-				"true" : "false");
-			/* Return error */
-			goto out;
-		}
-	} else if (req->nbytes == 0 && ctx->keylen > 0) {
-		ret = -EPERM;
-		dev_err(device_data->dev, "%s: Empty message with keylength > 0, NOT supported\n",
-			__func__);
-		goto out;
-	}
-
-	if (!req_ctx->updated) {
-		ret = init_hash_hw(device_data, ctx);
-		if (ret) {
-			dev_err(device_data->dev,
-				"%s: init_hash_hw() failed!\n", __func__);
-			goto out;
-		}
-	}
-
-	if (req_ctx->state.index) {
-		hash_messagepad(device_data, req_ctx->state.buffer,
-				req_ctx->state.index);
-	} else {
-		HASH_SET_DCAL;
-		while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-			cpu_relax();
-	}
-
-	if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC && ctx->key) {
-		unsigned int keylen = ctx->keylen;
-		u8 *key = ctx->key;
-
-		dev_dbg(device_data->dev, "%s: keylen: %d\n",
-			__func__, ctx->keylen);
-		hash_hw_write_key(device_data, key, keylen);
-	}
-
-	hash_get_digest(device_data, digest, ctx->config.algorithm);
-	memcpy(req->result, digest, ctx->digestsize);
-
-out:
-	release_hash_device(device_data);
-
-	/**
-	 * Allocated in setkey, and only used in HMAC.
-	 */
-	kfree(ctx->key);
-
-	return ret;
-}
-
-/**
- * hash_hw_update - Updates current HASH computation hashing another part of
- *                  the message.
- * @req:	Byte array containing the message to be hashed (caller
- *		allocated).
- */
-int hash_hw_update(struct ahash_request *req)
-{
-	int ret = 0;
-	u8 index = 0;
-	u8 *buffer;
-	struct hash_device_data *device_data;
-	u8 *data_buffer;
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
-	struct crypto_hash_walk walk;
-	int msg_length;
-
-	index = req_ctx->state.index;
-	buffer = (u8 *)req_ctx->state.buffer;
-
-	ret = hash_get_device_data(ctx, &device_data);
-	if (ret)
-		return ret;
-
-	msg_length = crypto_hash_walk_first(req, &walk);
-
-	/* Empty message ("") is correct indata */
-	if (msg_length == 0) {
-		ret = 0;
-		goto release_dev;
-	}
-
-	/* Check if ctx->state.length + msg_length
-	   overflows */
-	if (msg_length > (req_ctx->state.length.low_word + msg_length) &&
-	    HASH_HIGH_WORD_MAX_VAL == req_ctx->state.length.high_word) {
-		pr_err("%s: HASH_MSG_LENGTH_OVERFLOW!\n", __func__);
-		ret = crypto_hash_walk_done(&walk, -EPERM);
-		goto release_dev;
-	}
-
-	/* Main loop */
-	while (0 != msg_length) {
-		data_buffer = walk.data;
-		ret = hash_process_data(device_data, ctx, req_ctx, msg_length,
-				data_buffer, buffer, &index);
-
-		if (ret) {
-			dev_err(device_data->dev, "%s: hash_internal_hw_update() failed!\n",
-				__func__);
-			crypto_hash_walk_done(&walk, ret);
-			goto release_dev;
-		}
-
-		msg_length = crypto_hash_walk_done(&walk, 0);
-	}
-
-	req_ctx->state.index = index;
-	dev_dbg(device_data->dev, "%s: indata length=%d, bin=%d\n",
-		__func__, req_ctx->state.index, req_ctx->state.bit_index);
-
-release_dev:
-	release_hash_device(device_data);
-
-	return ret;
-}
-
-/**
- * hash_resume_state - Function that resumes the state of an calculation.
- * @device_data:	Pointer to the device structure.
- * @device_state:	The state to be restored in the hash hardware
- */
-int hash_resume_state(struct hash_device_data *device_data,
-		      const struct hash_state *device_state)
-{
-	u32 temp_cr;
-	s32 count;
-	int hash_mode = HASH_OPER_MODE_HASH;
-
-	if (NULL == device_state) {
-		dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
-			__func__);
-		return -EPERM;
-	}
-
-	/* Check correctness of index and length members */
-	if (device_state->index > HASH_BLOCK_SIZE ||
-	    (device_state->length.low_word % HASH_BLOCK_SIZE) != 0) {
-		dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
-			__func__);
-		return -EPERM;
-	}
-
-	/*
-	 * INIT bit. Set this bit to 0b1 to reset the HASH processor core and
-	 * prepare the initialize the HASH accelerator to compute the message
-	 * digest of a new message.
-	 */
-	HASH_INITIALIZE;
-
-	temp_cr = device_state->temp_cr;
-	writel_relaxed(temp_cr & HASH_CR_RESUME_MASK, &device_data->base->cr);
-
-	if (readl(&device_data->base->cr) & HASH_CR_MODE_MASK)
-		hash_mode = HASH_OPER_MODE_HMAC;
-	else
-		hash_mode = HASH_OPER_MODE_HASH;
-
-	for (count = 0; count < HASH_CSR_COUNT; count++) {
-		if ((count >= 36) && (hash_mode == HASH_OPER_MODE_HASH))
-			break;
-
-		writel_relaxed(device_state->csr[count],
-			       &device_data->base->csrx[count]);
-	}
-
-	writel_relaxed(device_state->csfull, &device_data->base->csfull);
-	writel_relaxed(device_state->csdatain, &device_data->base->csdatain);
-
-	writel_relaxed(device_state->str_reg, &device_data->base->str);
-	writel_relaxed(temp_cr, &device_data->base->cr);
-
-	return 0;
-}
-
-/**
- * hash_save_state - Function that saves the state of hardware.
- * @device_data:	Pointer to the device structure.
- * @device_state:	The strucure where the hardware state should be saved.
- */
-int hash_save_state(struct hash_device_data *device_data,
-		    struct hash_state *device_state)
-{
-	u32 temp_cr;
-	u32 count;
-	int hash_mode = HASH_OPER_MODE_HASH;
-
-	if (NULL == device_state) {
-		dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
-			__func__);
-		return -ENOTSUPP;
-	}
-
-	/* Write dummy value to force digest intermediate calculation. This
-	 * actually makes sure that there isn't any ongoing calculation in the
-	 * hardware.
-	 */
-	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-		cpu_relax();
-
-	temp_cr = readl_relaxed(&device_data->base->cr);
-
-	device_state->str_reg = readl_relaxed(&device_data->base->str);
-
-	device_state->din_reg = readl_relaxed(&device_data->base->din);
-
-	if (readl(&device_data->base->cr) & HASH_CR_MODE_MASK)
-		hash_mode = HASH_OPER_MODE_HMAC;
-	else
-		hash_mode = HASH_OPER_MODE_HASH;
-
-	for (count = 0; count < HASH_CSR_COUNT; count++) {
-		if ((count >= 36) && (hash_mode == HASH_OPER_MODE_HASH))
-			break;
-
-		device_state->csr[count] =
-			readl_relaxed(&device_data->base->csrx[count]);
-	}
-
-	device_state->csfull = readl_relaxed(&device_data->base->csfull);
-	device_state->csdatain = readl_relaxed(&device_data->base->csdatain);
-
-	device_state->temp_cr = temp_cr;
-
-	return 0;
-}
-
-/**
- * hash_check_hw - This routine checks for peripheral Ids and PCell Ids.
- * @device_data:
- *
- */
-int hash_check_hw(struct hash_device_data *device_data)
-{
-	/* Checking Peripheral Ids  */
-	if (HASH_P_ID0 == readl_relaxed(&device_data->base->periphid0) &&
-	    HASH_P_ID1 == readl_relaxed(&device_data->base->periphid1) &&
-	    HASH_P_ID2 == readl_relaxed(&device_data->base->periphid2) &&
-	    HASH_P_ID3 == readl_relaxed(&device_data->base->periphid3) &&
-	    HASH_CELL_ID0 == readl_relaxed(&device_data->base->cellid0) &&
-	    HASH_CELL_ID1 == readl_relaxed(&device_data->base->cellid1) &&
-	    HASH_CELL_ID2 == readl_relaxed(&device_data->base->cellid2) &&
-	    HASH_CELL_ID3 == readl_relaxed(&device_data->base->cellid3)) {
-		return 0;
-	}
-
-	dev_err(device_data->dev, "%s: HASH_UNSUPPORTED_HW!\n", __func__);
-	return -ENOTSUPP;
-}
-
-/**
- * hash_get_digest - Gets the digest.
- * @device_data:	Pointer to the device structure.
- * @digest:		User allocated byte array for the calculated digest.
- * @algorithm:		The algorithm in use.
- */
-void hash_get_digest(struct hash_device_data *device_data,
-		     u8 *digest, int algorithm)
-{
-	u32 temp_hx_val, count;
-	int loop_ctr;
-
-	if (algorithm != HASH_ALGO_SHA1 && algorithm != HASH_ALGO_SHA256) {
-		dev_err(device_data->dev, "%s: Incorrect algorithm %d\n",
-			__func__, algorithm);
-		return;
-	}
-
-	if (algorithm == HASH_ALGO_SHA1)
-		loop_ctr = SHA1_DIGEST_SIZE / sizeof(u32);
-	else
-		loop_ctr = SHA256_DIGEST_SIZE / sizeof(u32);
-
-	dev_dbg(device_data->dev, "%s: digest array:(0x%lx)\n",
-		__func__, (unsigned long)digest);
-
-	/* Copy result into digest array */
-	for (count = 0; count < loop_ctr; count++) {
-		temp_hx_val = readl_relaxed(&device_data->base->hx[count]);
-		digest[count * 4] = (u8) ((temp_hx_val >> 24) & 0xFF);
-		digest[count * 4 + 1] = (u8) ((temp_hx_val >> 16) & 0xFF);
-		digest[count * 4 + 2] = (u8) ((temp_hx_val >> 8) & 0xFF);
-		digest[count * 4 + 3] = (u8) ((temp_hx_val >> 0) & 0xFF);
-	}
-}
-
-/**
- * ahash_update - The hash update function for SHA1/SHA2 (SHA256).
- * @req: The hash request for the job.
- */
-static int ahash_update(struct ahash_request *req)
-{
-	int ret = 0;
-	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
-
-	if (hash_mode != HASH_MODE_DMA || !req_ctx->dma_mode)
-		ret = hash_hw_update(req);
-	/* Skip update for DMA, all data will be passed to DMA in final */
-
-	if (ret) {
-		pr_err("%s: hash_hw_update() failed!\n", __func__);
-	}
-
-	return ret;
-}
-
-/**
- * ahash_final - The hash final function for SHA1/SHA2 (SHA256).
- * @req:	The hash request for the job.
- */
-static int ahash_final(struct ahash_request *req)
-{
-	int ret = 0;
-	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
-
-	pr_debug("%s: data size: %d\n", __func__, req->nbytes);
-
-	if ((hash_mode == HASH_MODE_DMA) && req_ctx->dma_mode)
-		ret = hash_dma_final(req);
-	else
-		ret = hash_hw_final(req);
-
-	if (ret) {
-		pr_err("%s: hash_hw/dma_final() failed\n", __func__);
-	}
-
-	return ret;
-}
-
-static int hash_setkey(struct crypto_ahash *tfm,
-		       const u8 *key, unsigned int keylen, int alg)
-{
-	int ret = 0;
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-
-	/**
-	 * Freed in final.
-	 */
-	ctx->key = kmemdup(key, keylen, GFP_KERNEL);
-	if (!ctx->key) {
-		pr_err("%s: Failed to allocate ctx->key for %d\n",
-		       __func__, alg);
-		return -ENOMEM;
-	}
-	ctx->keylen = keylen;
-
-	return ret;
-}
-
-static int ahash_sha1_init(struct ahash_request *req)
-{
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-
-	ctx->config.data_format = HASH_DATA_8_BITS;
-	ctx->config.algorithm = HASH_ALGO_SHA1;
-	ctx->config.oper_mode = HASH_OPER_MODE_HASH;
-	ctx->digestsize = SHA1_DIGEST_SIZE;
-
-	return ux500_hash_init(req);
-}
-
-static int ahash_sha256_init(struct ahash_request *req)
-{
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-
-	ctx->config.data_format = HASH_DATA_8_BITS;
-	ctx->config.algorithm = HASH_ALGO_SHA256;
-	ctx->config.oper_mode = HASH_OPER_MODE_HASH;
-	ctx->digestsize = SHA256_DIGEST_SIZE;
-
-	return ux500_hash_init(req);
-}
-
-static int ahash_sha1_digest(struct ahash_request *req)
-{
-	int ret2, ret1;
-
-	ret1 = ahash_sha1_init(req);
-	if (ret1)
-		goto out;
-
-	ret1 = ahash_update(req);
-	ret2 = ahash_final(req);
-
-out:
-	return ret1 ? ret1 : ret2;
-}
-
-static int ahash_sha256_digest(struct ahash_request *req)
-{
-	int ret2, ret1;
-
-	ret1 = ahash_sha256_init(req);
-	if (ret1)
-		goto out;
-
-	ret1 = ahash_update(req);
-	ret2 = ahash_final(req);
-
-out:
-	return ret1 ? ret1 : ret2;
-}
-
-static int ahash_noimport(struct ahash_request *req, const void *in)
-{
-	return -ENOSYS;
-}
-
-static int ahash_noexport(struct ahash_request *req, void *out)
-{
-	return -ENOSYS;
-}
-
-static int hmac_sha1_init(struct ahash_request *req)
-{
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-
-	ctx->config.data_format	= HASH_DATA_8_BITS;
-	ctx->config.algorithm	= HASH_ALGO_SHA1;
-	ctx->config.oper_mode	= HASH_OPER_MODE_HMAC;
-	ctx->digestsize		= SHA1_DIGEST_SIZE;
-
-	return ux500_hash_init(req);
-}
-
-static int hmac_sha256_init(struct ahash_request *req)
-{
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-
-	ctx->config.data_format	= HASH_DATA_8_BITS;
-	ctx->config.algorithm	= HASH_ALGO_SHA256;
-	ctx->config.oper_mode	= HASH_OPER_MODE_HMAC;
-	ctx->digestsize		= SHA256_DIGEST_SIZE;
-
-	return ux500_hash_init(req);
-}
-
-static int hmac_sha1_digest(struct ahash_request *req)
-{
-	int ret2, ret1;
-
-	ret1 = hmac_sha1_init(req);
-	if (ret1)
-		goto out;
-
-	ret1 = ahash_update(req);
-	ret2 = ahash_final(req);
-
-out:
-	return ret1 ? ret1 : ret2;
-}
-
-static int hmac_sha256_digest(struct ahash_request *req)
-{
-	int ret2, ret1;
-
-	ret1 = hmac_sha256_init(req);
-	if (ret1)
-		goto out;
-
-	ret1 = ahash_update(req);
-	ret2 = ahash_final(req);
-
-out:
-	return ret1 ? ret1 : ret2;
-}
-
-static int hmac_sha1_setkey(struct crypto_ahash *tfm,
-			    const u8 *key, unsigned int keylen)
-{
-	return hash_setkey(tfm, key, keylen, HASH_ALGO_SHA1);
-}
-
-static int hmac_sha256_setkey(struct crypto_ahash *tfm,
-			      const u8 *key, unsigned int keylen)
-{
-	return hash_setkey(tfm, key, keylen, HASH_ALGO_SHA256);
-}
-
-struct hash_algo_template {
-	struct hash_config conf;
-	struct ahash_alg hash;
-};
-
-static int hash_cra_init(struct crypto_tfm *tfm)
-{
-	struct hash_ctx *ctx = crypto_tfm_ctx(tfm);
-	struct crypto_alg *alg = tfm->__crt_alg;
-	struct hash_algo_template *hash_alg;
-
-	hash_alg = container_of(__crypto_ahash_alg(alg),
-			struct hash_algo_template,
-			hash);
-
-	crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
-				 sizeof(struct hash_req_ctx));
-
-	ctx->config.data_format = HASH_DATA_8_BITS;
-	ctx->config.algorithm = hash_alg->conf.algorithm;
-	ctx->config.oper_mode = hash_alg->conf.oper_mode;
-
-	ctx->digestsize = hash_alg->hash.halg.digestsize;
-
-	return 0;
-}
-
-static struct hash_algo_template hash_algs[] = {
-	{
-		.conf.algorithm = HASH_ALGO_SHA1,
-		.conf.oper_mode = HASH_OPER_MODE_HASH,
-		.hash = {
-			.init = ux500_hash_init,
-			.update = ahash_update,
-			.final = ahash_final,
-			.digest = ahash_sha1_digest,
-			.export = ahash_noexport,
-			.import = ahash_noimport,
-			.halg.digestsize = SHA1_DIGEST_SIZE,
-			.halg.statesize = sizeof(struct hash_ctx),
-			.halg.base = {
-				.cra_name = "sha1",
-				.cra_driver_name = "sha1-ux500",
-				.cra_flags = CRYPTO_ALG_ASYNC,
-				.cra_blocksize = SHA1_BLOCK_SIZE,
-				.cra_ctxsize = sizeof(struct hash_ctx),
-				.cra_init = hash_cra_init,
-				.cra_module = THIS_MODULE,
-			}
-		}
-	},
-	{
-		.conf.algorithm	= HASH_ALGO_SHA256,
-		.conf.oper_mode	= HASH_OPER_MODE_HASH,
-		.hash = {
-			.init = ux500_hash_init,
-			.update	= ahash_update,
-			.final = ahash_final,
-			.digest = ahash_sha256_digest,
-			.export = ahash_noexport,
-			.import = ahash_noimport,
-			.halg.digestsize = SHA256_DIGEST_SIZE,
-			.halg.statesize = sizeof(struct hash_ctx),
-			.halg.base = {
-				.cra_name = "sha256",
-				.cra_driver_name = "sha256-ux500",
-				.cra_flags = CRYPTO_ALG_ASYNC,
-				.cra_blocksize = SHA256_BLOCK_SIZE,
-				.cra_ctxsize = sizeof(struct hash_ctx),
-				.cra_init = hash_cra_init,
-				.cra_module = THIS_MODULE,
-			}
-		}
-	},
-	{
-		.conf.algorithm = HASH_ALGO_SHA1,
-		.conf.oper_mode = HASH_OPER_MODE_HMAC,
-			.hash = {
-			.init = ux500_hash_init,
-			.update = ahash_update,
-			.final = ahash_final,
-			.digest = hmac_sha1_digest,
-			.setkey = hmac_sha1_setkey,
-			.export = ahash_noexport,
-			.import = ahash_noimport,
-			.halg.digestsize = SHA1_DIGEST_SIZE,
-			.halg.statesize = sizeof(struct hash_ctx),
-			.halg.base = {
-				.cra_name = "hmac(sha1)",
-				.cra_driver_name = "hmac-sha1-ux500",
-				.cra_flags = CRYPTO_ALG_ASYNC,
-				.cra_blocksize = SHA1_BLOCK_SIZE,
-				.cra_ctxsize = sizeof(struct hash_ctx),
-				.cra_init = hash_cra_init,
-				.cra_module = THIS_MODULE,
-			}
-		}
-	},
-	{
-		.conf.algorithm = HASH_ALGO_SHA256,
-		.conf.oper_mode = HASH_OPER_MODE_HMAC,
-		.hash = {
-			.init = ux500_hash_init,
-			.update = ahash_update,
-			.final = ahash_final,
-			.digest = hmac_sha256_digest,
-			.setkey = hmac_sha256_setkey,
-			.export = ahash_noexport,
-			.import = ahash_noimport,
-			.halg.digestsize = SHA256_DIGEST_SIZE,
-			.halg.statesize = sizeof(struct hash_ctx),
-			.halg.base = {
-				.cra_name = "hmac(sha256)",
-				.cra_driver_name = "hmac-sha256-ux500",
-				.cra_flags = CRYPTO_ALG_ASYNC,
-				.cra_blocksize = SHA256_BLOCK_SIZE,
-				.cra_ctxsize = sizeof(struct hash_ctx),
-				.cra_init = hash_cra_init,
-				.cra_module = THIS_MODULE,
-			}
-		}
-	}
-};
-
-static int ahash_algs_register_all(struct hash_device_data *device_data)
-{
-	int ret;
-	int i;
-	int count;
-
-	for (i = 0; i < ARRAY_SIZE(hash_algs); i++) {
-		ret = crypto_register_ahash(&hash_algs[i].hash);
-		if (ret) {
-			count = i;
-			dev_err(device_data->dev, "%s: alg registration failed\n",
-				hash_algs[i].hash.halg.base.cra_driver_name);
-			goto unreg;
-		}
-	}
-	return 0;
-unreg:
-	for (i = 0; i < count; i++)
-		crypto_unregister_ahash(&hash_algs[i].hash);
-	return ret;
-}
-
-static void ahash_algs_unregister_all(struct hash_device_data *device_data)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(hash_algs); i++)
-		crypto_unregister_ahash(&hash_algs[i].hash);
-}
-
-/**
- * ux500_hash_probe - Function that probes the hash hardware.
- * @pdev: The platform device.
- */
-static int ux500_hash_probe(struct platform_device *pdev)
-{
-	int			ret = 0;
-	struct resource		*res = NULL;
-	struct hash_device_data *device_data;
-	struct device		*dev = &pdev->dev;
-
-	device_data = devm_kzalloc(dev, sizeof(*device_data), GFP_KERNEL);
-	if (!device_data) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	device_data->dev = dev;
-	device_data->current_ctx = NULL;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_dbg(dev, "%s: platform_get_resource() failed!\n", __func__);
-		ret = -ENODEV;
-		goto out;
-	}
-
-	device_data->phybase = res->start;
-	device_data->base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(device_data->base)) {
-		ret = PTR_ERR(device_data->base);
-		goto out;
-	}
-	spin_lock_init(&device_data->ctx_lock);
-	spin_lock_init(&device_data->power_state_lock);
-
-	/* Enable power for HASH1 hardware block */
-	device_data->regulator = regulator_get(dev, "v-ape");
-	if (IS_ERR(device_data->regulator)) {
-		dev_err(dev, "%s: regulator_get() failed!\n", __func__);
-		ret = PTR_ERR(device_data->regulator);
-		device_data->regulator = NULL;
-		goto out;
-	}
-
-	/* Enable the clock for HASH1 hardware block */
-	device_data->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(device_data->clk)) {
-		dev_err(dev, "%s: clk_get() failed!\n", __func__);
-		ret = PTR_ERR(device_data->clk);
-		goto out_regulator;
-	}
-
-	ret = clk_prepare(device_data->clk);
-	if (ret) {
-		dev_err(dev, "%s: clk_prepare() failed!\n", __func__);
-		goto out_regulator;
-	}
-
-	/* Enable device power (and clock) */
-	ret = hash_enable_power(device_data, false);
-	if (ret) {
-		dev_err(dev, "%s: hash_enable_power() failed!\n", __func__);
-		goto out_clk_unprepare;
-	}
-
-	ret = hash_check_hw(device_data);
-	if (ret) {
-		dev_err(dev, "%s: hash_check_hw() failed!\n", __func__);
-		goto out_power;
-	}
-
-	if (hash_mode == HASH_MODE_DMA)
-		hash_dma_setup_channel(device_data, dev);
-
-	platform_set_drvdata(pdev, device_data);
-
-	/* Put the new device into the device list... */
-	klist_add_tail(&device_data->list_node, &driver_data.device_list);
-	/* ... and signal that a new device is available. */
-	up(&driver_data.device_allocation);
-
-	ret = ahash_algs_register_all(device_data);
-	if (ret) {
-		dev_err(dev, "%s: ahash_algs_register_all() failed!\n",
-			__func__);
-		goto out_power;
-	}
-
-	dev_info(dev, "successfully registered\n");
-	return 0;
-
-out_power:
-	hash_disable_power(device_data, false);
-
-out_clk_unprepare:
-	clk_unprepare(device_data->clk);
-
-out_regulator:
-	regulator_put(device_data->regulator);
-
-out:
-	return ret;
-}
-
-/**
- * ux500_hash_remove - Function that removes the hash device from the platform.
- * @pdev: The platform device.
- */
-static int ux500_hash_remove(struct platform_device *pdev)
-{
-	struct hash_device_data *device_data;
-	struct device		*dev = &pdev->dev;
-
-	device_data = platform_get_drvdata(pdev);
-	if (!device_data) {
-		dev_err(dev, "%s: platform_get_drvdata() failed!\n", __func__);
-		return -ENOMEM;
-	}
-
-	/* Try to decrease the number of available devices. */
-	if (down_trylock(&driver_data.device_allocation))
-		return -EBUSY;
-
-	/* Check that the device is free */
-	spin_lock(&device_data->ctx_lock);
-	/* current_ctx allocates a device, NULL = unallocated */
-	if (device_data->current_ctx) {
-		/* The device is busy */
-		spin_unlock(&device_data->ctx_lock);
-		/* Return the device to the pool. */
-		up(&driver_data.device_allocation);
-		return -EBUSY;
-	}
-
-	spin_unlock(&device_data->ctx_lock);
-
-	/* Remove the device from the list */
-	if (klist_node_attached(&device_data->list_node))
-		klist_remove(&device_data->list_node);
-
-	/* If this was the last device, remove the services */
-	if (list_empty(&driver_data.device_list.k_list))
-		ahash_algs_unregister_all(device_data);
-
-	if (hash_disable_power(device_data, false))
-		dev_err(dev, "%s: hash_disable_power() failed\n",
-			__func__);
-
-	clk_unprepare(device_data->clk);
-	regulator_put(device_data->regulator);
-
-	return 0;
-}
-
-/**
- * ux500_hash_shutdown - Function that shutdown the hash device.
- * @pdev: The platform device
- */
-static void ux500_hash_shutdown(struct platform_device *pdev)
-{
-	struct hash_device_data *device_data;
-
-	device_data = platform_get_drvdata(pdev);
-	if (!device_data) {
-		dev_err(&pdev->dev, "%s: platform_get_drvdata() failed!\n",
-			__func__);
-		return;
-	}
-
-	/* Check that the device is free */
-	spin_lock(&device_data->ctx_lock);
-	/* current_ctx allocates a device, NULL = unallocated */
-	if (!device_data->current_ctx) {
-		if (down_trylock(&driver_data.device_allocation))
-			dev_dbg(&pdev->dev, "%s: Cryp still in use! Shutting down anyway...\n",
-				__func__);
-		/**
-		 * (Allocate the device)
-		 * Need to set this to non-null (dummy) value,
-		 * to avoid usage if context switching.
-		 */
-		device_data->current_ctx++;
-	}
-	spin_unlock(&device_data->ctx_lock);
-
-	/* Remove the device from the list */
-	if (klist_node_attached(&device_data->list_node))
-		klist_remove(&device_data->list_node);
-
-	/* If this was the last device, remove the services */
-	if (list_empty(&driver_data.device_list.k_list))
-		ahash_algs_unregister_all(device_data);
-
-	if (hash_disable_power(device_data, false))
-		dev_err(&pdev->dev, "%s: hash_disable_power() failed\n",
-			__func__);
-}
-
-#ifdef CONFIG_PM_SLEEP
-/**
- * ux500_hash_suspend - Function that suspends the hash device.
- * @dev:	Device to suspend.
- */
-static int ux500_hash_suspend(struct device *dev)
-{
-	int ret;
-	struct hash_device_data *device_data;
-	struct hash_ctx *temp_ctx = NULL;
-
-	device_data = dev_get_drvdata(dev);
-	if (!device_data) {
-		dev_err(dev, "%s: platform_get_drvdata() failed!\n", __func__);
-		return -ENOMEM;
-	}
-
-	spin_lock(&device_data->ctx_lock);
-	if (!device_data->current_ctx)
-		device_data->current_ctx++;
-	spin_unlock(&device_data->ctx_lock);
-
-	if (device_data->current_ctx == ++temp_ctx) {
-		if (down_interruptible(&driver_data.device_allocation))
-			dev_dbg(dev, "%s: down_interruptible() failed\n",
-				__func__);
-		ret = hash_disable_power(device_data, false);
-
-	} else {
-		ret = hash_disable_power(device_data, true);
-	}
-
-	if (ret)
-		dev_err(dev, "%s: hash_disable_power()\n", __func__);
-
-	return ret;
-}
-
-/**
- * ux500_hash_resume - Function that resume the hash device.
- * @dev:	Device to resume.
- */
-static int ux500_hash_resume(struct device *dev)
-{
-	int ret = 0;
-	struct hash_device_data *device_data;
-	struct hash_ctx *temp_ctx = NULL;
-
-	device_data = dev_get_drvdata(dev);
-	if (!device_data) {
-		dev_err(dev, "%s: platform_get_drvdata() failed!\n", __func__);
-		return -ENOMEM;
-	}
-
-	spin_lock(&device_data->ctx_lock);
-	if (device_data->current_ctx == ++temp_ctx)
-		device_data->current_ctx = NULL;
-	spin_unlock(&device_data->ctx_lock);
-
-	if (!device_data->current_ctx)
-		up(&driver_data.device_allocation);
-	else
-		ret = hash_enable_power(device_data, true);
-
-	if (ret)
-		dev_err(dev, "%s: hash_enable_power() failed!\n", __func__);
-
-	return ret;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(ux500_hash_pm, ux500_hash_suspend, ux500_hash_resume);
-
-static const struct of_device_id ux500_hash_match[] = {
-	{ .compatible = "stericsson,ux500-hash" },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, ux500_hash_match);
-
-static struct platform_driver hash_driver = {
-	.probe  = ux500_hash_probe,
-	.remove = ux500_hash_remove,
-	.shutdown = ux500_hash_shutdown,
-	.driver = {
-		.name  = "hash1",
-		.of_match_table = ux500_hash_match,
-		.pm    = &ux500_hash_pm,
-	}
-};
-
-/**
- * ux500_hash_mod_init - The kernel module init function.
- */
-static int __init ux500_hash_mod_init(void)
-{
-	klist_init(&driver_data.device_list, NULL, NULL);
-	/* Initialize the semaphore to 0 devices (locked state) */
-	sema_init(&driver_data.device_allocation, 0);
-
-	return platform_driver_register(&hash_driver);
-}
-
-/**
- * ux500_hash_mod_fini - The kernel module exit function.
- */
-static void __exit ux500_hash_mod_fini(void)
-{
-	platform_driver_unregister(&hash_driver);
-}
-
-module_init(ux500_hash_mod_init);
-module_exit(ux500_hash_mod_fini);
-
-MODULE_DESCRIPTION("Driver for ST-Ericsson UX500 HASH engine.");
-MODULE_LICENSE("GPL");
-
-MODULE_ALIAS_CRYPTO("sha1-all");
-MODULE_ALIAS_CRYPTO("sha256-all");
-MODULE_ALIAS_CRYPTO("hmac-sha1-all");
-MODULE_ALIAS_CRYPTO("hmac-sha256-all");

-- 
2.39.0

[PATCH v3 6/6] crypto: ux500/hash - delete driver

[Linus Walleij]

It turns out we can just modify the newer STM32 HASH driver
to be used with Ux500 and now that we have done that, delete
the old and sparsely maintained Ux500 HASH driver.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- No changes
ChangeLog v1->v2:
- Resending with the rest.
---
 drivers/crypto/Kconfig                |   10 -
 drivers/crypto/Makefile               |    1 -
 drivers/crypto/ux500/Kconfig          |   22 -
 drivers/crypto/ux500/Makefile         |    7 -
 drivers/crypto/ux500/hash/Makefile    |   11 -
 drivers/crypto/ux500/hash/hash_alg.h  |  398 -------
 drivers/crypto/ux500/hash/hash_core.c | 1966 ---------------------------------
 7 files changed, 2415 deletions(-)

diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index dfb103f81a64..3b2516d1433f 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -390,16 +390,6 @@ if CRYPTO_DEV_NX
 	source "drivers/crypto/nx/Kconfig"
 endif
 
-config CRYPTO_DEV_UX500
-	tristate "Driver for ST-Ericsson UX500 crypto hardware acceleration"
-	depends on ARCH_U8500
-	help
-	  Driver for ST-Ericsson UX500 crypto engine.
-
-if CRYPTO_DEV_UX500
-	source "drivers/crypto/ux500/Kconfig"
-endif # if CRYPTO_DEV_UX500
-
 config CRYPTO_DEV_ATMEL_AUTHENC
 	bool "Support for Atmel IPSEC/SSL hw accelerator"
 	depends on ARCH_AT91 || COMPILE_TEST
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index fa8bf1be1a8c..476f1a25ca32 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -43,7 +43,6 @@ obj-$(CONFIG_CRYPTO_DEV_SAHARA) += sahara.o
 obj-$(CONFIG_CRYPTO_DEV_SL3516) += gemini/
 obj-y += stm32/
 obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
-obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/
 obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio/
 obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/
 obj-$(CONFIG_CRYPTO_DEV_BCM_SPU) += bcm/
diff --git a/drivers/crypto/ux500/Kconfig b/drivers/crypto/ux500/Kconfig
deleted file mode 100644
index dcbd7404768f..000000000000
--- a/drivers/crypto/ux500/Kconfig
+++ /dev/null
@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Copyright (C) ST-Ericsson SA 2010
-# Author: Shujuan Chen (shujuan.chen@stericsson.com)
-#
-
-config CRYPTO_DEV_UX500_HASH
-	tristate "UX500 crypto driver for HASH block"
-	depends on CRYPTO_DEV_UX500
-	select CRYPTO_HASH
-	select CRYPTO_SHA1
-	select CRYPTO_SHA256
-	help
-	  This selects the hash driver for the UX500_HASH hardware.
-	  Depends on UX500/STM DMA if running in DMA mode.
-
-config CRYPTO_DEV_UX500_DEBUG
-	bool "Activate ux500 platform debug-mode for crypto and hash block"
-	depends on CRYPTO_DEV_UX500_CRYP || CRYPTO_DEV_UX500_HASH
-	help
-	  Say Y if you want to add debug prints to ux500_hash and
-	  ux500_cryp devices.
diff --git a/drivers/crypto/ux500/Makefile b/drivers/crypto/ux500/Makefile
deleted file mode 100644
index f1aa4edf66f4..000000000000
--- a/drivers/crypto/ux500/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Copyright (C) ST-Ericsson SA 2010
-# Author: Shujuan Chen (shujuan.chen@stericsson.com)
-#
-
-obj-$(CONFIG_CRYPTO_DEV_UX500_HASH) += hash/
diff --git a/drivers/crypto/ux500/hash/Makefile b/drivers/crypto/ux500/hash/Makefile
deleted file mode 100644
index a8f088724772..000000000000
--- a/drivers/crypto/ux500/hash/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Copyright (C) ST-Ericsson SA 2010
-# Author: Shujuan Chen (shujuan.chen@stericsson.com)
-#
-ifdef CONFIG_CRYPTO_DEV_UX500_DEBUG
-CFLAGS_hash_core.o := -DDEBUG
-endif
-
-obj-$(CONFIG_CRYPTO_DEV_UX500_HASH) += ux500_hash.o
-ux500_hash-objs :=  hash_core.o
diff --git a/drivers/crypto/ux500/hash/hash_alg.h b/drivers/crypto/ux500/hash/hash_alg.h
deleted file mode 100644
index 7c9bcc15125f..000000000000
--- a/drivers/crypto/ux500/hash/hash_alg.h
+++ /dev/null
@@ -1,398 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Shujuan Chen (shujuan.chen@stericsson.com)
- * Author: Joakim Bech (joakim.xx.bech@stericsson.com)
- * Author: Berne Hebark (berne.hebark@stericsson.com))
- */
-#ifndef _HASH_ALG_H
-#define _HASH_ALG_H
-
-#include <linux/bitops.h>
-
-#define HASH_BLOCK_SIZE			64
-#define HASH_DMA_FIFO			4
-#define HASH_DMA_ALIGN_SIZE		4
-#define HASH_DMA_PERFORMANCE_MIN_SIZE	1024
-#define HASH_BYTES_PER_WORD		4
-
-/* Maximum value of the length's high word */
-#define HASH_HIGH_WORD_MAX_VAL		0xFFFFFFFFUL
-
-/* Power on Reset values HASH registers */
-#define HASH_RESET_CR_VALUE		0x0
-#define HASH_RESET_STR_VALUE		0x0
-
-/* Number of context swap registers */
-#define HASH_CSR_COUNT			52
-
-#define HASH_RESET_CSRX_REG_VALUE	0x0
-#define HASH_RESET_CSFULL_REG_VALUE	0x0
-#define HASH_RESET_CSDATAIN_REG_VALUE	0x0
-
-#define HASH_RESET_INDEX_VAL		0x0
-#define HASH_RESET_BIT_INDEX_VAL	0x0
-#define HASH_RESET_BUFFER_VAL		0x0
-#define HASH_RESET_LEN_HIGH_VAL		0x0
-#define HASH_RESET_LEN_LOW_VAL		0x0
-
-/* Control register bitfields */
-#define HASH_CR_RESUME_MASK	0x11FCF
-
-#define HASH_CR_SWITCHON_POS	31
-#define HASH_CR_SWITCHON_MASK	BIT(31)
-
-#define HASH_CR_EMPTYMSG_POS	20
-#define HASH_CR_EMPTYMSG_MASK	BIT(20)
-
-#define HASH_CR_DINF_POS	12
-#define HASH_CR_DINF_MASK	BIT(12)
-
-#define HASH_CR_NBW_POS		8
-#define HASH_CR_NBW_MASK	0x00000F00UL
-
-#define HASH_CR_LKEY_POS	16
-#define HASH_CR_LKEY_MASK	BIT(16)
-
-#define HASH_CR_ALGO_POS	7
-#define HASH_CR_ALGO_MASK	BIT(7)
-
-#define HASH_CR_MODE_POS	6
-#define HASH_CR_MODE_MASK	BIT(6)
-
-#define HASH_CR_DATAFORM_POS	4
-#define HASH_CR_DATAFORM_MASK	(BIT(4) | BIT(5))
-
-#define HASH_CR_DMAE_POS	3
-#define HASH_CR_DMAE_MASK	BIT(3)
-
-#define HASH_CR_INIT_POS	2
-#define HASH_CR_INIT_MASK	BIT(2)
-
-#define HASH_CR_PRIVN_POS	1
-#define HASH_CR_PRIVN_MASK	BIT(1)
-
-#define HASH_CR_SECN_POS	0
-#define HASH_CR_SECN_MASK	BIT(0)
-
-/* Start register bitfields */
-#define HASH_STR_DCAL_POS	8
-#define HASH_STR_DCAL_MASK	BIT(8)
-#define HASH_STR_DEFAULT	0x0
-
-#define HASH_STR_NBLW_POS	0
-#define HASH_STR_NBLW_MASK	0x0000001FUL
-
-#define HASH_NBLW_MAX_VAL	0x1F
-
-/* PrimeCell IDs */
-#define HASH_P_ID0		0xE0
-#define HASH_P_ID1		0x05
-#define HASH_P_ID2		0x38
-#define HASH_P_ID3		0x00
-#define HASH_CELL_ID0		0x0D
-#define HASH_CELL_ID1		0xF0
-#define HASH_CELL_ID2		0x05
-#define HASH_CELL_ID3		0xB1
-
-#define HASH_SET_BITS(reg_name, mask)	\
-	writel_relaxed((readl_relaxed(reg_name) | mask), reg_name)
-
-#define HASH_CLEAR_BITS(reg_name, mask)	\
-	writel_relaxed((readl_relaxed(reg_name) & ~mask), reg_name)
-
-#define HASH_PUT_BITS(reg, val, shift, mask)	\
-	writel_relaxed(((readl(reg) & ~(mask)) |	\
-		(((u32)val << shift) & (mask))), reg)
-
-#define HASH_SET_DIN(val, len)	writesl(&device_data->base->din, (val), (len))
-
-#define HASH_INITIALIZE			\
-	HASH_PUT_BITS(			\
-		&device_data->base->cr,	\
-		0x01, HASH_CR_INIT_POS,	\
-		HASH_CR_INIT_MASK)
-
-#define HASH_SET_DATA_FORMAT(data_format)				\
-		HASH_PUT_BITS(						\
-			&device_data->base->cr,				\
-			(u32) (data_format), HASH_CR_DATAFORM_POS,	\
-			HASH_CR_DATAFORM_MASK)
-#define HASH_SET_NBLW(val)					\
-		HASH_PUT_BITS(					\
-			&device_data->base->str,		\
-			(u32) (val), HASH_STR_NBLW_POS,		\
-			HASH_STR_NBLW_MASK)
-#define HASH_SET_DCAL					\
-		HASH_PUT_BITS(				\
-			&device_data->base->str,	\
-			0x01, HASH_STR_DCAL_POS,	\
-			HASH_STR_DCAL_MASK)
-
-/* Hardware access method */
-enum hash_mode {
-	HASH_MODE_CPU,
-	HASH_MODE_DMA
-};
-
-/**
- * struct uint64 - Structure to handle 64 bits integers.
- * @high_word:	Most significant bits.
- * @low_word:	Least significant bits.
- *
- * Used to handle 64 bits integers.
- */
-struct uint64 {
-	u32 high_word;
-	u32 low_word;
-};
-
-/**
- * struct hash_register - Contains all registers in ux500 hash hardware.
- * @cr:		HASH control register (0x000).
- * @din:	HASH data input register (0x004).
- * @str:	HASH start register (0x008).
- * @hx:		HASH digest register 0..7 (0x00c-0x01C).
- * @padding0:	Reserved (0x02C).
- * @itcr:	Integration test control register (0x080).
- * @itip:	Integration test input register (0x084).
- * @itop:	Integration test output register (0x088).
- * @padding1:	Reserved (0x08C).
- * @csfull:	HASH context full register (0x0F8).
- * @csdatain:	HASH context swap data input register (0x0FC).
- * @csrx:	HASH context swap register 0..51 (0x100-0x1CC).
- * @padding2:	Reserved (0x1D0).
- * @periphid0:	HASH peripheral identification register 0 (0xFE0).
- * @periphid1:	HASH peripheral identification register 1 (0xFE4).
- * @periphid2:	HASH peripheral identification register 2 (0xFE8).
- * @periphid3:	HASH peripheral identification register 3 (0xFEC).
- * @cellid0:	HASH PCell identification register 0 (0xFF0).
- * @cellid1:	HASH PCell identification register 1 (0xFF4).
- * @cellid2:	HASH PCell identification register 2 (0xFF8).
- * @cellid3:	HASH PCell identification register 3 (0xFFC).
- *
- * The device communicates to the HASH via 32-bit-wide control registers
- * accessible via the 32-bit width AMBA rev. 2.0 AHB Bus. Below is a structure
- * with the registers used.
- */
-struct hash_register {
-	u32 cr;
-	u32 din;
-	u32 str;
-	u32 hx[8];
-
-	u32 padding0[(0x080 - 0x02C) / sizeof(u32)];
-
-	u32 itcr;
-	u32 itip;
-	u32 itop;
-
-	u32 padding1[(0x0F8 - 0x08C) / sizeof(u32)];
-
-	u32 csfull;
-	u32 csdatain;
-	u32 csrx[HASH_CSR_COUNT];
-
-	u32 padding2[(0xFE0 - 0x1D0) / sizeof(u32)];
-
-	u32 periphid0;
-	u32 periphid1;
-	u32 periphid2;
-	u32 periphid3;
-
-	u32 cellid0;
-	u32 cellid1;
-	u32 cellid2;
-	u32 cellid3;
-};
-
-/**
- * struct hash_state - Hash context state.
- * @temp_cr:	Temporary HASH Control Register.
- * @str_reg:	HASH Start Register.
- * @din_reg:	HASH Data Input Register.
- * @csr[52]:	HASH Context Swap Registers 0-39.
- * @csfull:	HASH Context Swap Registers 40 ie Status flags.
- * @csdatain:	HASH Context Swap Registers 41 ie Input data.
- * @buffer:	Working buffer for messages going to the hardware.
- * @length:	Length of the part of message hashed so far (floor(N/64) * 64).
- * @index:	Valid number of bytes in buffer (N % 64).
- * @bit_index:	Valid number of bits in buffer (N % 8).
- *
- * This structure is used between context switches, i.e. when ongoing jobs are
- * interupted with new jobs. When this happens we need to store intermediate
- * results in software.
- *
- * WARNING: "index" is the  member of the structure, to be sure  that "buffer"
- * is aligned on a 4-bytes boundary. This is highly implementation dependent
- * and MUST be checked whenever this code is ported on new platforms.
- */
-struct hash_state {
-	u32		temp_cr;
-	u32		str_reg;
-	u32		din_reg;
-	u32		csr[52];
-	u32		csfull;
-	u32		csdatain;
-	u32		buffer[HASH_BLOCK_SIZE / sizeof(u32)];
-	struct uint64	length;
-	u8		index;
-	u8		bit_index;
-};
-
-/**
- * enum hash_device_id - HASH device ID.
- * @HASH_DEVICE_ID_0: Hash hardware with ID 0
- * @HASH_DEVICE_ID_1: Hash hardware with ID 1
- */
-enum hash_device_id {
-	HASH_DEVICE_ID_0 = 0,
-	HASH_DEVICE_ID_1 = 1
-};
-
-/**
- * enum hash_data_format - HASH data format.
- * @HASH_DATA_32_BITS:	32 bits data format
- * @HASH_DATA_16_BITS:	16 bits data format
- * @HASH_DATA_8_BITS:	8 bits data format.
- * @HASH_DATA_1_BITS:	1 bit data format.
- */
-enum hash_data_format {
-	HASH_DATA_32_BITS	= 0x0,
-	HASH_DATA_16_BITS	= 0x1,
-	HASH_DATA_8_BITS	= 0x2,
-	HASH_DATA_1_BIT		= 0x3
-};
-
-/**
- * enum hash_algo - Enumeration for selecting between SHA1 or SHA2 algorithm.
- * @HASH_ALGO_SHA1: Indicates that SHA1 is used.
- * @HASH_ALGO_SHA2: Indicates that SHA2 (SHA256) is used.
- */
-enum hash_algo {
-	HASH_ALGO_SHA1		= 0x0,
-	HASH_ALGO_SHA256	= 0x1
-};
-
-/**
- * enum hash_op - Enumeration for selecting between HASH or HMAC mode.
- * @HASH_OPER_MODE_HASH: Indicates usage of normal HASH mode.
- * @HASH_OPER_MODE_HMAC: Indicates usage of HMAC.
- */
-enum hash_op {
-	HASH_OPER_MODE_HASH = 0x0,
-	HASH_OPER_MODE_HMAC = 0x1
-};
-
-/**
- * struct hash_config - Configuration data for the hardware.
- * @data_format:	Format of data entered into the hash data in register.
- * @algorithm:		Algorithm selection bit.
- * @oper_mode:		Operating mode selection bit.
- */
-struct hash_config {
-	int data_format;
-	int algorithm;
-	int oper_mode;
-};
-
-/**
- * struct hash_dma - Structure used for dma.
- * @mask:		DMA capabilities bitmap mask.
- * @complete:		Used to maintain state for a "completion".
- * @chan_mem2hash:	DMA channel.
- * @cfg_mem2hash:	DMA channel configuration.
- * @sg_len:		Scatterlist length.
- * @sg:			Scatterlist.
- * @nents:		Number of sg entries.
- */
-struct hash_dma {
-	dma_cap_mask_t		mask;
-	struct completion	complete;
-	struct dma_chan		*chan_mem2hash;
-	void			*cfg_mem2hash;
-	int			sg_len;
-	struct scatterlist	*sg;
-	int			nents;
-};
-
-/**
- * struct hash_ctx - The context used for hash calculations.
- * @key:	The key used in the operation.
- * @keylen:	The length of the key.
- * @state:	The state of the current calculations.
- * @config:	The current configuration.
- * @digestsize:	The size of current digest.
- * @device:	Pointer to the device structure.
- */
-struct hash_ctx {
-	u8			*key;
-	u32			keylen;
-	struct hash_config	config;
-	int			digestsize;
-	struct hash_device_data	*device;
-};
-
-/**
- * struct hash_ctx - The request context used for hash calculations.
- * @state:	The state of the current calculations.
- * @dma_mode:	Used in special cases (workaround), e.g. need to change to
- *		cpu mode, if not supported/working in dma mode.
- * @updated:	Indicates if hardware is initialized for new operations.
- */
-struct hash_req_ctx {
-	struct hash_state	state;
-	bool			dma_mode;
-	u8			updated;
-};
-
-/**
- * struct hash_device_data - structure for a hash device.
- * @base:		Pointer to virtual base address of the hash device.
- * @phybase:		Pointer to physical memory location of the hash device.
- * @list_node:		For inclusion in klist.
- * @dev:		Pointer to the device dev structure.
- * @ctx_lock:		Spinlock for current_ctx.
- * @current_ctx:	Pointer to the currently allocated context.
- * @power_state:	TRUE = power state on, FALSE = power state off.
- * @power_state_lock:	Spinlock for power_state.
- * @regulator:		Pointer to the device's power control.
- * @clk:		Pointer to the device's clock control.
- * @restore_dev_state:	TRUE = saved state, FALSE = no saved state.
- * @dma:		Structure used for dma.
- */
-struct hash_device_data {
-	struct hash_register __iomem	*base;
-	phys_addr_t             phybase;
-	struct klist_node	list_node;
-	struct device		*dev;
-	spinlock_t		ctx_lock;
-	struct hash_ctx		*current_ctx;
-	bool			power_state;
-	spinlock_t		power_state_lock;
-	struct regulator	*regulator;
-	struct clk		*clk;
-	bool			restore_dev_state;
-	struct hash_state	state; /* Used for saving and resuming state */
-	struct hash_dma		dma;
-};
-
-int hash_check_hw(struct hash_device_data *device_data);
-
-int hash_setconfiguration(struct hash_device_data *device_data,
-		struct hash_config *config);
-
-void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx);
-
-void hash_get_digest(struct hash_device_data *device_data,
-		u8 *digest, int algorithm);
-
-int hash_hw_update(struct ahash_request *req);
-
-int hash_save_state(struct hash_device_data *device_data,
-		struct hash_state *state);
-
-int hash_resume_state(struct hash_device_data *device_data,
-		const struct hash_state *state);
-
-#endif
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
deleted file mode 100644
index f104e8a43036..000000000000
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ /dev/null
@@ -1,1966 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Cryptographic API.
- * Support for Nomadik hardware crypto engine.
-
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson
- * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson
- * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson.
- * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson.
- * Author: Andreas Westin <andreas.westin@stericsson.com> for ST-Ericsson.
- */
-
-#define pr_fmt(fmt) "hashX hashX: " fmt
-
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/klist.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/platform_device.h>
-#include <linux/crypto.h>
-
-#include <linux/regulator/consumer.h>
-#include <linux/dmaengine.h>
-#include <linux/bitops.h>
-
-#include <crypto/internal/hash.h>
-#include <crypto/sha1.h>
-#include <crypto/sha2.h>
-#include <crypto/scatterwalk.h>
-#include <crypto/algapi.h>
-
-#include <linux/platform_data/crypto-ux500.h>
-
-#include "hash_alg.h"
-
-static int hash_mode;
-module_param(hash_mode, int, 0);
-MODULE_PARM_DESC(hash_mode, "CPU or DMA mode. CPU = 0 (default), DMA = 1");
-
-/* HMAC-SHA1, no key */
-static const u8 zero_message_hmac_sha1[SHA1_DIGEST_SIZE] = {
-	0xfb, 0xdb, 0x1d, 0x1b, 0x18, 0xaa, 0x6c, 0x08,
-	0x32, 0x4b, 0x7d, 0x64, 0xb7, 0x1f, 0xb7, 0x63,
-	0x70, 0x69, 0x0e, 0x1d
-};
-
-/* HMAC-SHA256, no key */
-static const u8 zero_message_hmac_sha256[SHA256_DIGEST_SIZE] = {
-	0xb6, 0x13, 0x67, 0x9a, 0x08, 0x14, 0xd9, 0xec,
-	0x77, 0x2f, 0x95, 0xd7, 0x78, 0xc3, 0x5f, 0xc5,
-	0xff, 0x16, 0x97, 0xc4, 0x93, 0x71, 0x56, 0x53,
-	0xc6, 0xc7, 0x12, 0x14, 0x42, 0x92, 0xc5, 0xad
-};
-
-/**
- * struct hash_driver_data - data specific to the driver.
- *
- * @device_list:	A list of registered devices to choose from.
- * @device_allocation:	A semaphore initialized with number of devices.
- */
-struct hash_driver_data {
-	struct klist		device_list;
-	struct semaphore	device_allocation;
-};
-
-static struct hash_driver_data	driver_data;
-
-/* Declaration of functions */
-/**
- * hash_messagepad - Pads a message and write the nblw bits.
- * @device_data:	Structure for the hash device.
- * @message:		Last word of a message
- * @index_bytes:	The number of bytes in the last message
- *
- * This function manages the final part of the digest calculation, when less
- * than 512 bits (64 bytes) remain in message. This means index_bytes < 64.
- *
- */
-static void hash_messagepad(struct hash_device_data *device_data,
-			    const u32 *message, u8 index_bytes);
-
-/**
- * release_hash_device - Releases a previously allocated hash device.
- * @device_data:	Structure for the hash device.
- *
- */
-static void release_hash_device(struct hash_device_data *device_data)
-{
-	spin_lock(&device_data->ctx_lock);
-	device_data->current_ctx->device = NULL;
-	device_data->current_ctx = NULL;
-	spin_unlock(&device_data->ctx_lock);
-
-	/*
-	 * The down_interruptible part for this semaphore is called in
-	 * cryp_get_device_data.
-	 */
-	up(&driver_data.device_allocation);
-}
-
-static void hash_dma_setup_channel(struct hash_device_data *device_data,
-				   struct device *dev)
-{
-	struct hash_platform_data *platform_data = dev->platform_data;
-	struct dma_slave_config conf = {
-		.direction = DMA_MEM_TO_DEV,
-		.dst_addr = device_data->phybase + HASH_DMA_FIFO,
-		.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
-		.dst_maxburst = 16,
-	};
-
-	dma_cap_zero(device_data->dma.mask);
-	dma_cap_set(DMA_SLAVE, device_data->dma.mask);
-
-	device_data->dma.cfg_mem2hash = platform_data->mem_to_engine;
-	device_data->dma.chan_mem2hash =
-		dma_request_channel(device_data->dma.mask,
-				    platform_data->dma_filter,
-				    device_data->dma.cfg_mem2hash);
-
-	dmaengine_slave_config(device_data->dma.chan_mem2hash, &conf);
-
-	init_completion(&device_data->dma.complete);
-}
-
-static void hash_dma_callback(void *data)
-{
-	struct hash_ctx *ctx = data;
-
-	complete(&ctx->device->dma.complete);
-}
-
-static int hash_set_dma_transfer(struct hash_ctx *ctx, struct scatterlist *sg,
-				 int len, enum dma_data_direction direction)
-{
-	struct dma_async_tx_descriptor *desc = NULL;
-	struct dma_chan *channel = NULL;
-
-	if (direction != DMA_TO_DEVICE) {
-		dev_err(ctx->device->dev, "%s: Invalid DMA direction\n",
-			__func__);
-		return -EFAULT;
-	}
-
-	sg->length = ALIGN(sg->length, HASH_DMA_ALIGN_SIZE);
-
-	channel = ctx->device->dma.chan_mem2hash;
-	ctx->device->dma.sg = sg;
-	ctx->device->dma.sg_len = dma_map_sg(channel->device->dev,
-			ctx->device->dma.sg, ctx->device->dma.nents,
-			direction);
-
-	if (!ctx->device->dma.sg_len) {
-		dev_err(ctx->device->dev, "%s: Could not map the sg list (TO_DEVICE)\n",
-			__func__);
-		return -EFAULT;
-	}
-
-	dev_dbg(ctx->device->dev, "%s: Setting up DMA for buffer (TO_DEVICE)\n",
-		__func__);
-	desc = dmaengine_prep_slave_sg(channel,
-			ctx->device->dma.sg, ctx->device->dma.sg_len,
-			DMA_MEM_TO_DEV, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
-	if (!desc) {
-		dev_err(ctx->device->dev,
-			"%s: dmaengine_prep_slave_sg() failed!\n", __func__);
-		return -EFAULT;
-	}
-
-	desc->callback = hash_dma_callback;
-	desc->callback_param = ctx;
-
-	dmaengine_submit(desc);
-	dma_async_issue_pending(channel);
-
-	return 0;
-}
-
-static void hash_dma_done(struct hash_ctx *ctx)
-{
-	struct dma_chan *chan;
-
-	chan = ctx->device->dma.chan_mem2hash;
-	dmaengine_terminate_all(chan);
-	dma_unmap_sg(chan->device->dev, ctx->device->dma.sg,
-		     ctx->device->dma.nents, DMA_TO_DEVICE);
-}
-
-static int hash_dma_write(struct hash_ctx *ctx,
-			  struct scatterlist *sg, int len)
-{
-	int error = hash_set_dma_transfer(ctx, sg, len, DMA_TO_DEVICE);
-	if (error) {
-		dev_dbg(ctx->device->dev,
-			"%s: hash_set_dma_transfer() failed\n", __func__);
-		return error;
-	}
-
-	return len;
-}
-
-/**
- * get_empty_message_digest - Returns a pre-calculated digest for
- * the empty message.
- * @device_data:	Structure for the hash device.
- * @zero_hash:		Buffer to return the empty message digest.
- * @zero_hash_size:	Hash size of the empty message digest.
- * @zero_digest:	True if zero_digest returned.
- */
-static int get_empty_message_digest(
-		struct hash_device_data *device_data,
-		u8 *zero_hash, u32 *zero_hash_size, bool *zero_digest)
-{
-	int ret = 0;
-	struct hash_ctx *ctx = device_data->current_ctx;
-	*zero_digest = false;
-
-	/**
-	 * Caller responsible for ctx != NULL.
-	 */
-
-	if (HASH_OPER_MODE_HASH == ctx->config.oper_mode) {
-		if (HASH_ALGO_SHA1 == ctx->config.algorithm) {
-			memcpy(zero_hash, &sha1_zero_message_hash[0],
-			       SHA1_DIGEST_SIZE);
-			*zero_hash_size = SHA1_DIGEST_SIZE;
-			*zero_digest = true;
-		} else if (HASH_ALGO_SHA256 ==
-				ctx->config.algorithm) {
-			memcpy(zero_hash, &sha256_zero_message_hash[0],
-			       SHA256_DIGEST_SIZE);
-			*zero_hash_size = SHA256_DIGEST_SIZE;
-			*zero_digest = true;
-		} else {
-			dev_err(device_data->dev, "%s: Incorrect algorithm!\n",
-				__func__);
-			ret = -EINVAL;
-			goto out;
-		}
-	} else if (HASH_OPER_MODE_HMAC == ctx->config.oper_mode) {
-		if (!ctx->keylen) {
-			if (HASH_ALGO_SHA1 == ctx->config.algorithm) {
-				memcpy(zero_hash, &zero_message_hmac_sha1[0],
-				       SHA1_DIGEST_SIZE);
-				*zero_hash_size = SHA1_DIGEST_SIZE;
-				*zero_digest = true;
-			} else if (HASH_ALGO_SHA256 == ctx->config.algorithm) {
-				memcpy(zero_hash, &zero_message_hmac_sha256[0],
-				       SHA256_DIGEST_SIZE);
-				*zero_hash_size = SHA256_DIGEST_SIZE;
-				*zero_digest = true;
-			} else {
-				dev_err(device_data->dev, "%s: Incorrect algorithm!\n",
-					__func__);
-				ret = -EINVAL;
-				goto out;
-			}
-		} else {
-			dev_dbg(device_data->dev,
-				"%s: Continue hash calculation, since hmac key available\n",
-				__func__);
-		}
-	}
-out:
-
-	return ret;
-}
-
-/**
- * hash_disable_power - Request to disable power and clock.
- * @device_data:	Structure for the hash device.
- * @save_device_state:	If true, saves the current hw state.
- *
- * This function request for disabling power (regulator) and clock,
- * and could also save current hw state.
- */
-static int hash_disable_power(struct hash_device_data *device_data,
-			      bool save_device_state)
-{
-	int ret = 0;
-	struct device *dev = device_data->dev;
-
-	spin_lock(&device_data->power_state_lock);
-	if (!device_data->power_state)
-		goto out;
-
-	if (save_device_state) {
-		hash_save_state(device_data,
-				&device_data->state);
-		device_data->restore_dev_state = true;
-	}
-
-	clk_disable(device_data->clk);
-	ret = regulator_disable(device_data->regulator);
-	if (ret)
-		dev_err(dev, "%s: regulator_disable() failed!\n", __func__);
-
-	device_data->power_state = false;
-
-out:
-	spin_unlock(&device_data->power_state_lock);
-
-	return ret;
-}
-
-/**
- * hash_enable_power - Request to enable power and clock.
- * @device_data:		Structure for the hash device.
- * @restore_device_state:	If true, restores a previous saved hw state.
- *
- * This function request for enabling power (regulator) and clock,
- * and could also restore a previously saved hw state.
- */
-static int hash_enable_power(struct hash_device_data *device_data,
-			     bool restore_device_state)
-{
-	int ret = 0;
-	struct device *dev = device_data->dev;
-
-	spin_lock(&device_data->power_state_lock);
-	if (!device_data->power_state) {
-		ret = regulator_enable(device_data->regulator);
-		if (ret) {
-			dev_err(dev, "%s: regulator_enable() failed!\n",
-				__func__);
-			goto out;
-		}
-		ret = clk_enable(device_data->clk);
-		if (ret) {
-			dev_err(dev, "%s: clk_enable() failed!\n", __func__);
-			ret = regulator_disable(
-					device_data->regulator);
-			goto out;
-		}
-		device_data->power_state = true;
-	}
-
-	if (device_data->restore_dev_state) {
-		if (restore_device_state) {
-			device_data->restore_dev_state = false;
-			hash_resume_state(device_data, &device_data->state);
-		}
-	}
-out:
-	spin_unlock(&device_data->power_state_lock);
-
-	return ret;
-}
-
-/**
- * hash_get_device_data - Checks for an available hash device and return it.
- * @ctx:		Structure for the hash context.
- * @device_data:	Structure for the hash device.
- *
- * This function check for an available hash device and return it to
- * the caller.
- * Note! Caller need to release the device, calling up().
- */
-static int hash_get_device_data(struct hash_ctx *ctx,
-				struct hash_device_data **device_data)
-{
-	int			ret;
-	struct klist_iter	device_iterator;
-	struct klist_node	*device_node;
-	struct hash_device_data *local_device_data = NULL;
-
-	/* Wait until a device is available */
-	ret = down_interruptible(&driver_data.device_allocation);
-	if (ret)
-		return ret;  /* Interrupted */
-
-	/* Select a device */
-	klist_iter_init(&driver_data.device_list, &device_iterator);
-	device_node = klist_next(&device_iterator);
-	while (device_node) {
-		local_device_data = container_of(device_node,
-					   struct hash_device_data, list_node);
-		spin_lock(&local_device_data->ctx_lock);
-		/* current_ctx allocates a device, NULL = unallocated */
-		if (local_device_data->current_ctx) {
-			device_node = klist_next(&device_iterator);
-		} else {
-			local_device_data->current_ctx = ctx;
-			ctx->device = local_device_data;
-			spin_unlock(&local_device_data->ctx_lock);
-			break;
-		}
-		spin_unlock(&local_device_data->ctx_lock);
-	}
-	klist_iter_exit(&device_iterator);
-
-	if (!device_node) {
-		/**
-		 * No free device found.
-		 * Since we allocated a device with down_interruptible, this
-		 * should not be able to happen.
-		 * Number of available devices, which are contained in
-		 * device_allocation, is therefore decremented by not doing
-		 * an up(device_allocation).
-		 */
-		return -EBUSY;
-	}
-
-	*device_data = local_device_data;
-
-	return 0;
-}
-
-/**
- * hash_hw_write_key - Writes the key to the hardware registries.
- *
- * @device_data:	Structure for the hash device.
- * @key:		Key to be written.
- * @keylen:		The lengt of the key.
- *
- * Note! This function DOES NOT write to the NBLW registry, even though
- * specified in the hw design spec. Either due to incorrect info in the
- * spec or due to a bug in the hw.
- */
-static void hash_hw_write_key(struct hash_device_data *device_data,
-			      const u8 *key, unsigned int keylen)
-{
-	u32 word = 0;
-	int nwords = 1;
-
-	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
-
-	while (keylen >= 4) {
-		u32 *key_word = (u32 *)key;
-
-		HASH_SET_DIN(key_word, nwords);
-		keylen -= 4;
-		key += 4;
-	}
-
-	/* Take care of the remaining bytes in the last word */
-	if (keylen) {
-		word = 0;
-		while (keylen) {
-			word |= (key[keylen - 1] << (8 * (keylen - 1)));
-			keylen--;
-		}
-
-		HASH_SET_DIN(&word, nwords);
-	}
-
-	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-		cpu_relax();
-
-	HASH_SET_DCAL;
-
-	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-		cpu_relax();
-}
-
-/**
- * init_hash_hw - Initialise the hash hardware for a new calculation.
- * @device_data:	Structure for the hash device.
- * @ctx:		The hash context.
- *
- * This function will enable the bits needed to clear and start a new
- * calculation.
- */
-static int init_hash_hw(struct hash_device_data *device_data,
-			struct hash_ctx *ctx)
-{
-	int ret = 0;
-
-	ret = hash_setconfiguration(device_data, &ctx->config);
-	if (ret) {
-		dev_err(device_data->dev, "%s: hash_setconfiguration() failed!\n",
-			__func__);
-		return ret;
-	}
-
-	hash_begin(device_data, ctx);
-
-	if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC)
-		hash_hw_write_key(device_data, ctx->key, ctx->keylen);
-
-	return ret;
-}
-
-/**
- * hash_get_nents - Return number of entries (nents) in scatterlist (sg).
- *
- * @sg:		Scatterlist.
- * @size:	Size in bytes.
- * @aligned:	True if sg data aligned to work in DMA mode.
- *
- */
-static int hash_get_nents(struct scatterlist *sg, int size, bool *aligned)
-{
-	int nents = 0;
-	bool aligned_data = true;
-
-	while (size > 0 && sg) {
-		nents++;
-		size -= sg->length;
-
-		/* hash_set_dma_transfer will align last nent */
-		if ((aligned && !IS_ALIGNED(sg->offset, HASH_DMA_ALIGN_SIZE)) ||
-		    (!IS_ALIGNED(sg->length, HASH_DMA_ALIGN_SIZE) && size > 0))
-			aligned_data = false;
-
-		sg = sg_next(sg);
-	}
-
-	if (aligned)
-		*aligned = aligned_data;
-
-	if (size != 0)
-		return -EFAULT;
-
-	return nents;
-}
-
-/**
- * hash_dma_valid_data - checks for dma valid sg data.
- * @sg:		Scatterlist.
- * @datasize:	Datasize in bytes.
- *
- * NOTE! This function checks for dma valid sg data, since dma
- * only accept datasizes of even wordsize.
- */
-static bool hash_dma_valid_data(struct scatterlist *sg, int datasize)
-{
-	bool aligned;
-
-	/* Need to include at least one nent, else error */
-	if (hash_get_nents(sg, datasize, &aligned) < 1)
-		return false;
-
-	return aligned;
-}
-
-/**
- * ux500_hash_init - Common hash init function for SHA1/SHA2 (SHA256).
- * @req: The hash request for the job.
- *
- * Initialize structures.
- */
-static int ux500_hash_init(struct ahash_request *req)
-{
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
-
-	if (!ctx->key)
-		ctx->keylen = 0;
-
-	memset(&req_ctx->state, 0, sizeof(struct hash_state));
-	req_ctx->updated = 0;
-	if (hash_mode == HASH_MODE_DMA) {
-		if (req->nbytes < HASH_DMA_ALIGN_SIZE) {
-			req_ctx->dma_mode = false; /* Don't use DMA */
-
-			pr_debug("%s: DMA mode, but direct to CPU mode for data size < %d\n",
-				 __func__, HASH_DMA_ALIGN_SIZE);
-		} else {
-			if (req->nbytes >= HASH_DMA_PERFORMANCE_MIN_SIZE &&
-			    hash_dma_valid_data(req->src, req->nbytes)) {
-				req_ctx->dma_mode = true;
-			} else {
-				req_ctx->dma_mode = false;
-				pr_debug("%s: DMA mode, but use CPU mode for datalength < %d or non-aligned data, except in last nent\n",
-					 __func__,
-					 HASH_DMA_PERFORMANCE_MIN_SIZE);
-			}
-		}
-	}
-	return 0;
-}
-
-/**
- * hash_processblock - This function processes a single block of 512 bits (64
- *                     bytes), word aligned, starting at message.
- * @device_data:	Structure for the hash device.
- * @message:		Block (512 bits) of message to be written to
- *			the HASH hardware.
- * @length:		Message length
- *
- */
-static void hash_processblock(struct hash_device_data *device_data,
-			      const u32 *message, int length)
-{
-	int len = length / HASH_BYTES_PER_WORD;
-	/*
-	 * NBLW bits. Reset the number of bits in last word (NBLW).
-	 */
-	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
-
-	/*
-	 * Write message data to the HASH_DIN register.
-	 */
-	HASH_SET_DIN(message, len);
-}
-
-/**
- * hash_messagepad - Pads a message and write the nblw bits.
- * @device_data:	Structure for the hash device.
- * @message:		Last word of a message.
- * @index_bytes:	The number of bytes in the last message.
- *
- * This function manages the final part of the digest calculation, when less
- * than 512 bits (64 bytes) remain in message. This means index_bytes < 64.
- *
- */
-static void hash_messagepad(struct hash_device_data *device_data,
-			    const u32 *message, u8 index_bytes)
-{
-	int nwords = 1;
-
-	/*
-	 * Clear hash str register, only clear NBLW
-	 * since DCAL will be reset by hardware.
-	 */
-	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
-
-	/* Main loop */
-	while (index_bytes >= 4) {
-		HASH_SET_DIN(message, nwords);
-		index_bytes -= 4;
-		message++;
-	}
-
-	if (index_bytes)
-		HASH_SET_DIN(message, nwords);
-
-	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-		cpu_relax();
-
-	/* num_of_bytes == 0 => NBLW <- 0 (32 bits valid in DATAIN) */
-	HASH_SET_NBLW(index_bytes * 8);
-	dev_dbg(device_data->dev, "%s: DIN=0x%08x NBLW=%lu\n",
-		__func__, readl_relaxed(&device_data->base->din),
-		readl_relaxed(&device_data->base->str) & HASH_STR_NBLW_MASK);
-	HASH_SET_DCAL;
-	dev_dbg(device_data->dev, "%s: after dcal -> DIN=0x%08x NBLW=%lu\n",
-		__func__, readl_relaxed(&device_data->base->din),
-		readl_relaxed(&device_data->base->str) & HASH_STR_NBLW_MASK);
-
-	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-		cpu_relax();
-}
-
-/**
- * hash_incrementlength - Increments the length of the current message.
- * @ctx: Hash context
- * @incr: Length of message processed already
- *
- * Overflow cannot occur, because conditions for overflow are checked in
- * hash_hw_update.
- */
-static void hash_incrementlength(struct hash_req_ctx *ctx, u32 incr)
-{
-	ctx->state.length.low_word += incr;
-
-	/* Check for wrap-around */
-	if (ctx->state.length.low_word < incr)
-		ctx->state.length.high_word++;
-}
-
-/**
- * hash_setconfiguration - Sets the required configuration for the hash
- *                         hardware.
- * @device_data:	Structure for the hash device.
- * @config:		Pointer to a configuration structure.
- */
-int hash_setconfiguration(struct hash_device_data *device_data,
-			  struct hash_config *config)
-{
-	int ret = 0;
-
-	if (config->algorithm != HASH_ALGO_SHA1 &&
-	    config->algorithm != HASH_ALGO_SHA256)
-		return -EPERM;
-
-	/*
-	 * DATAFORM bits. Set the DATAFORM bits to 0b11, which means the data
-	 * to be written to HASH_DIN is considered as 32 bits.
-	 */
-	HASH_SET_DATA_FORMAT(config->data_format);
-
-	/*
-	 * ALGO bit. Set to 0b1 for SHA-1 and 0b0 for SHA-256
-	 */
-	switch (config->algorithm) {
-	case HASH_ALGO_SHA1:
-		HASH_SET_BITS(&device_data->base->cr, HASH_CR_ALGO_MASK);
-		break;
-
-	case HASH_ALGO_SHA256:
-		HASH_CLEAR_BITS(&device_data->base->cr, HASH_CR_ALGO_MASK);
-		break;
-
-	default:
-		dev_err(device_data->dev, "%s: Incorrect algorithm\n",
-			__func__);
-		return -EPERM;
-	}
-
-	/*
-	 * MODE bit. This bit selects between HASH or HMAC mode for the
-	 * selected algorithm. 0b0 = HASH and 0b1 = HMAC.
-	 */
-	if (HASH_OPER_MODE_HASH == config->oper_mode)
-		HASH_CLEAR_BITS(&device_data->base->cr,
-				HASH_CR_MODE_MASK);
-	else if (HASH_OPER_MODE_HMAC == config->oper_mode) {
-		HASH_SET_BITS(&device_data->base->cr, HASH_CR_MODE_MASK);
-		if (device_data->current_ctx->keylen > HASH_BLOCK_SIZE) {
-			/* Truncate key to blocksize */
-			dev_dbg(device_data->dev, "%s: LKEY set\n", __func__);
-			HASH_SET_BITS(&device_data->base->cr,
-				      HASH_CR_LKEY_MASK);
-		} else {
-			dev_dbg(device_data->dev, "%s: LKEY cleared\n",
-				__func__);
-			HASH_CLEAR_BITS(&device_data->base->cr,
-					HASH_CR_LKEY_MASK);
-		}
-	} else {	/* Wrong hash mode */
-		ret = -EPERM;
-		dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
-			__func__);
-	}
-	return ret;
-}
-
-/**
- * hash_begin - This routine resets some globals and initializes the hash
- *              hardware.
- * @device_data:	Structure for the hash device.
- * @ctx:		Hash context.
- */
-void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx)
-{
-	/* HW and SW initializations */
-	/* Note: there is no need to initialize buffer and digest members */
-
-	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-		cpu_relax();
-
-	/*
-	 * INIT bit. Set this bit to 0b1 to reset the HASH processor core and
-	 * prepare the initialize the HASH accelerator to compute the message
-	 * digest of a new message.
-	 */
-	HASH_INITIALIZE;
-
-	/*
-	 * NBLW bits. Reset the number of bits in last word (NBLW).
-	 */
-	HASH_CLEAR_BITS(&device_data->base->str, HASH_STR_NBLW_MASK);
-}
-
-static int hash_process_data(struct hash_device_data *device_data,
-			     struct hash_ctx *ctx, struct hash_req_ctx *req_ctx,
-			     int msg_length, u8 *data_buffer, u8 *buffer,
-			     u8 *index)
-{
-	int ret = 0;
-	u32 count;
-
-	do {
-		if ((*index + msg_length) < HASH_BLOCK_SIZE) {
-			for (count = 0; count < msg_length; count++) {
-				buffer[*index + count] =
-					*(data_buffer + count);
-			}
-			*index += msg_length;
-			msg_length = 0;
-		} else {
-			if (req_ctx->updated) {
-				ret = hash_resume_state(device_data,
-						&device_data->state);
-				memmove(req_ctx->state.buffer,
-					device_data->state.buffer,
-					HASH_BLOCK_SIZE);
-				if (ret) {
-					dev_err(device_data->dev,
-						"%s: hash_resume_state() failed!\n",
-						__func__);
-					goto out;
-				}
-			} else {
-				ret = init_hash_hw(device_data, ctx);
-				if (ret) {
-					dev_err(device_data->dev,
-						"%s: init_hash_hw() failed!\n",
-						__func__);
-					goto out;
-				}
-				req_ctx->updated = 1;
-			}
-			/*
-			 * If 'data_buffer' is four byte aligned and
-			 * local buffer does not have any data, we can
-			 * write data directly from 'data_buffer' to
-			 * HW peripheral, otherwise we first copy data
-			 * to a local buffer
-			 */
-			if (IS_ALIGNED((unsigned long)data_buffer, 4) &&
-			    (0 == *index))
-				hash_processblock(device_data,
-						  (const u32 *)data_buffer,
-						  HASH_BLOCK_SIZE);
-			else {
-				for (count = 0;
-				     count < (u32)(HASH_BLOCK_SIZE - *index);
-				     count++) {
-					buffer[*index + count] =
-						*(data_buffer + count);
-				}
-				hash_processblock(device_data,
-						  (const u32 *)buffer,
-						  HASH_BLOCK_SIZE);
-			}
-			hash_incrementlength(req_ctx, HASH_BLOCK_SIZE);
-			data_buffer += (HASH_BLOCK_SIZE - *index);
-
-			msg_length -= (HASH_BLOCK_SIZE - *index);
-			*index = 0;
-
-			ret = hash_save_state(device_data,
-					&device_data->state);
-
-			memmove(device_data->state.buffer,
-				req_ctx->state.buffer,
-				HASH_BLOCK_SIZE);
-			if (ret) {
-				dev_err(device_data->dev, "%s: hash_save_state() failed!\n",
-					__func__);
-				goto out;
-			}
-		}
-	} while (msg_length != 0);
-out:
-
-	return ret;
-}
-
-/**
- * hash_dma_final - The hash dma final function for SHA1/SHA256.
- * @req:	The hash request for the job.
- */
-static int hash_dma_final(struct ahash_request *req)
-{
-	int ret = 0;
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
-	struct hash_device_data *device_data;
-	u8 digest[SHA256_DIGEST_SIZE];
-	int bytes_written = 0;
-
-	ret = hash_get_device_data(ctx, &device_data);
-	if (ret)
-		return ret;
-
-	dev_dbg(device_data->dev, "%s: (ctx=0x%lx)!\n", __func__,
-		(unsigned long)ctx);
-
-	if (req_ctx->updated) {
-		ret = hash_resume_state(device_data, &device_data->state);
-
-		if (ret) {
-			dev_err(device_data->dev, "%s: hash_resume_state() failed!\n",
-				__func__);
-			goto out;
-		}
-	} else {
-		ret = hash_setconfiguration(device_data, &ctx->config);
-		if (ret) {
-			dev_err(device_data->dev,
-				"%s: hash_setconfiguration() failed!\n",
-				__func__);
-			goto out;
-		}
-
-		/* Enable DMA input */
-		if (hash_mode != HASH_MODE_DMA || !req_ctx->dma_mode) {
-			HASH_CLEAR_BITS(&device_data->base->cr,
-					HASH_CR_DMAE_MASK);
-		} else {
-			HASH_SET_BITS(&device_data->base->cr,
-				      HASH_CR_DMAE_MASK);
-			HASH_SET_BITS(&device_data->base->cr,
-				      HASH_CR_PRIVN_MASK);
-		}
-
-		HASH_INITIALIZE;
-
-		if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC)
-			hash_hw_write_key(device_data, ctx->key, ctx->keylen);
-
-		/* Number of bits in last word = (nbytes * 8) % 32 */
-		HASH_SET_NBLW((req->nbytes * 8) % 32);
-		req_ctx->updated = 1;
-	}
-
-	/* Store the nents in the dma struct. */
-	ctx->device->dma.nents = hash_get_nents(req->src, req->nbytes, NULL);
-	if (!ctx->device->dma.nents) {
-		dev_err(device_data->dev, "%s: ctx->device->dma.nents = 0\n",
-			__func__);
-		ret = ctx->device->dma.nents;
-		goto out;
-	}
-
-	bytes_written = hash_dma_write(ctx, req->src, req->nbytes);
-	if (bytes_written != req->nbytes) {
-		dev_err(device_data->dev, "%s: hash_dma_write() failed!\n",
-			__func__);
-		ret = bytes_written;
-		goto out;
-	}
-
-	wait_for_completion(&ctx->device->dma.complete);
-	hash_dma_done(ctx);
-
-	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-		cpu_relax();
-
-	if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC && ctx->key) {
-		unsigned int keylen = ctx->keylen;
-		u8 *key = ctx->key;
-
-		dev_dbg(device_data->dev, "%s: keylen: %d\n",
-			__func__, ctx->keylen);
-		hash_hw_write_key(device_data, key, keylen);
-	}
-
-	hash_get_digest(device_data, digest, ctx->config.algorithm);
-	memcpy(req->result, digest, ctx->digestsize);
-
-out:
-	release_hash_device(device_data);
-
-	/**
-	 * Allocated in setkey, and only used in HMAC.
-	 */
-	kfree(ctx->key);
-
-	return ret;
-}
-
-/**
- * hash_hw_final - The final hash calculation function
- * @req:	The hash request for the job.
- */
-static int hash_hw_final(struct ahash_request *req)
-{
-	int ret = 0;
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
-	struct hash_device_data *device_data;
-	u8 digest[SHA256_DIGEST_SIZE];
-
-	ret = hash_get_device_data(ctx, &device_data);
-	if (ret)
-		return ret;
-
-	dev_dbg(device_data->dev, "%s: (ctx=0x%lx)!\n", __func__,
-		(unsigned long)ctx);
-
-	if (req_ctx->updated) {
-		ret = hash_resume_state(device_data, &device_data->state);
-
-		if (ret) {
-			dev_err(device_data->dev,
-				"%s: hash_resume_state() failed!\n", __func__);
-			goto out;
-		}
-	} else if (req->nbytes == 0 && ctx->keylen == 0) {
-		u8 zero_hash[SHA256_DIGEST_SIZE];
-		u32 zero_hash_size = 0;
-		bool zero_digest = false;
-		/**
-		 * Use a pre-calculated empty message digest
-		 * (workaround since hw return zeroes, hw bug!?)
-		 */
-		ret = get_empty_message_digest(device_data, &zero_hash[0],
-				&zero_hash_size, &zero_digest);
-		if (!ret && likely(zero_hash_size == ctx->digestsize) &&
-		    zero_digest) {
-			memcpy(req->result, &zero_hash[0], ctx->digestsize);
-			goto out;
-		} else if (!ret && !zero_digest) {
-			dev_dbg(device_data->dev,
-				"%s: HMAC zero msg with key, continue...\n",
-				__func__);
-		} else {
-			dev_err(device_data->dev,
-				"%s: ret=%d, or wrong digest size? %s\n",
-				__func__, ret,
-				zero_hash_size == ctx->digestsize ?
-				"true" : "false");
-			/* Return error */
-			goto out;
-		}
-	} else if (req->nbytes == 0 && ctx->keylen > 0) {
-		ret = -EPERM;
-		dev_err(device_data->dev, "%s: Empty message with keylength > 0, NOT supported\n",
-			__func__);
-		goto out;
-	}
-
-	if (!req_ctx->updated) {
-		ret = init_hash_hw(device_data, ctx);
-		if (ret) {
-			dev_err(device_data->dev,
-				"%s: init_hash_hw() failed!\n", __func__);
-			goto out;
-		}
-	}
-
-	if (req_ctx->state.index) {
-		hash_messagepad(device_data, req_ctx->state.buffer,
-				req_ctx->state.index);
-	} else {
-		HASH_SET_DCAL;
-		while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-			cpu_relax();
-	}
-
-	if (ctx->config.oper_mode == HASH_OPER_MODE_HMAC && ctx->key) {
-		unsigned int keylen = ctx->keylen;
-		u8 *key = ctx->key;
-
-		dev_dbg(device_data->dev, "%s: keylen: %d\n",
-			__func__, ctx->keylen);
-		hash_hw_write_key(device_data, key, keylen);
-	}
-
-	hash_get_digest(device_data, digest, ctx->config.algorithm);
-	memcpy(req->result, digest, ctx->digestsize);
-
-out:
-	release_hash_device(device_data);
-
-	/**
-	 * Allocated in setkey, and only used in HMAC.
-	 */
-	kfree(ctx->key);
-
-	return ret;
-}
-
-/**
- * hash_hw_update - Updates current HASH computation hashing another part of
- *                  the message.
- * @req:	Byte array containing the message to be hashed (caller
- *		allocated).
- */
-int hash_hw_update(struct ahash_request *req)
-{
-	int ret = 0;
-	u8 index = 0;
-	u8 *buffer;
-	struct hash_device_data *device_data;
-	u8 *data_buffer;
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
-	struct crypto_hash_walk walk;
-	int msg_length;
-
-	index = req_ctx->state.index;
-	buffer = (u8 *)req_ctx->state.buffer;
-
-	ret = hash_get_device_data(ctx, &device_data);
-	if (ret)
-		return ret;
-
-	msg_length = crypto_hash_walk_first(req, &walk);
-
-	/* Empty message ("") is correct indata */
-	if (msg_length == 0) {
-		ret = 0;
-		goto release_dev;
-	}
-
-	/* Check if ctx->state.length + msg_length
-	   overflows */
-	if (msg_length > (req_ctx->state.length.low_word + msg_length) &&
-	    HASH_HIGH_WORD_MAX_VAL == req_ctx->state.length.high_word) {
-		pr_err("%s: HASH_MSG_LENGTH_OVERFLOW!\n", __func__);
-		ret = crypto_hash_walk_done(&walk, -EPERM);
-		goto release_dev;
-	}
-
-	/* Main loop */
-	while (0 != msg_length) {
-		data_buffer = walk.data;
-		ret = hash_process_data(device_data, ctx, req_ctx, msg_length,
-				data_buffer, buffer, &index);
-
-		if (ret) {
-			dev_err(device_data->dev, "%s: hash_internal_hw_update() failed!\n",
-				__func__);
-			crypto_hash_walk_done(&walk, ret);
-			goto release_dev;
-		}
-
-		msg_length = crypto_hash_walk_done(&walk, 0);
-	}
-
-	req_ctx->state.index = index;
-	dev_dbg(device_data->dev, "%s: indata length=%d, bin=%d\n",
-		__func__, req_ctx->state.index, req_ctx->state.bit_index);
-
-release_dev:
-	release_hash_device(device_data);
-
-	return ret;
-}
-
-/**
- * hash_resume_state - Function that resumes the state of an calculation.
- * @device_data:	Pointer to the device structure.
- * @device_state:	The state to be restored in the hash hardware
- */
-int hash_resume_state(struct hash_device_data *device_data,
-		      const struct hash_state *device_state)
-{
-	u32 temp_cr;
-	s32 count;
-	int hash_mode = HASH_OPER_MODE_HASH;
-
-	if (NULL == device_state) {
-		dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
-			__func__);
-		return -EPERM;
-	}
-
-	/* Check correctness of index and length members */
-	if (device_state->index > HASH_BLOCK_SIZE ||
-	    (device_state->length.low_word % HASH_BLOCK_SIZE) != 0) {
-		dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
-			__func__);
-		return -EPERM;
-	}
-
-	/*
-	 * INIT bit. Set this bit to 0b1 to reset the HASH processor core and
-	 * prepare the initialize the HASH accelerator to compute the message
-	 * digest of a new message.
-	 */
-	HASH_INITIALIZE;
-
-	temp_cr = device_state->temp_cr;
-	writel_relaxed(temp_cr & HASH_CR_RESUME_MASK, &device_data->base->cr);
-
-	if (readl(&device_data->base->cr) & HASH_CR_MODE_MASK)
-		hash_mode = HASH_OPER_MODE_HMAC;
-	else
-		hash_mode = HASH_OPER_MODE_HASH;
-
-	for (count = 0; count < HASH_CSR_COUNT; count++) {
-		if ((count >= 36) && (hash_mode == HASH_OPER_MODE_HASH))
-			break;
-
-		writel_relaxed(device_state->csr[count],
-			       &device_data->base->csrx[count]);
-	}
-
-	writel_relaxed(device_state->csfull, &device_data->base->csfull);
-	writel_relaxed(device_state->csdatain, &device_data->base->csdatain);
-
-	writel_relaxed(device_state->str_reg, &device_data->base->str);
-	writel_relaxed(temp_cr, &device_data->base->cr);
-
-	return 0;
-}
-
-/**
- * hash_save_state - Function that saves the state of hardware.
- * @device_data:	Pointer to the device structure.
- * @device_state:	The strucure where the hardware state should be saved.
- */
-int hash_save_state(struct hash_device_data *device_data,
-		    struct hash_state *device_state)
-{
-	u32 temp_cr;
-	u32 count;
-	int hash_mode = HASH_OPER_MODE_HASH;
-
-	if (NULL == device_state) {
-		dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
-			__func__);
-		return -ENOTSUPP;
-	}
-
-	/* Write dummy value to force digest intermediate calculation. This
-	 * actually makes sure that there isn't any ongoing calculation in the
-	 * hardware.
-	 */
-	while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
-		cpu_relax();
-
-	temp_cr = readl_relaxed(&device_data->base->cr);
-
-	device_state->str_reg = readl_relaxed(&device_data->base->str);
-
-	device_state->din_reg = readl_relaxed(&device_data->base->din);
-
-	if (readl(&device_data->base->cr) & HASH_CR_MODE_MASK)
-		hash_mode = HASH_OPER_MODE_HMAC;
-	else
-		hash_mode = HASH_OPER_MODE_HASH;
-
-	for (count = 0; count < HASH_CSR_COUNT; count++) {
-		if ((count >= 36) && (hash_mode == HASH_OPER_MODE_HASH))
-			break;
-
-		device_state->csr[count] =
-			readl_relaxed(&device_data->base->csrx[count]);
-	}
-
-	device_state->csfull = readl_relaxed(&device_data->base->csfull);
-	device_state->csdatain = readl_relaxed(&device_data->base->csdatain);
-
-	device_state->temp_cr = temp_cr;
-
-	return 0;
-}
-
-/**
- * hash_check_hw - This routine checks for peripheral Ids and PCell Ids.
- * @device_data:
- *
- */
-int hash_check_hw(struct hash_device_data *device_data)
-{
-	/* Checking Peripheral Ids  */
-	if (HASH_P_ID0 == readl_relaxed(&device_data->base->periphid0) &&
-	    HASH_P_ID1 == readl_relaxed(&device_data->base->periphid1) &&
-	    HASH_P_ID2 == readl_relaxed(&device_data->base->periphid2) &&
-	    HASH_P_ID3 == readl_relaxed(&device_data->base->periphid3) &&
-	    HASH_CELL_ID0 == readl_relaxed(&device_data->base->cellid0) &&
-	    HASH_CELL_ID1 == readl_relaxed(&device_data->base->cellid1) &&
-	    HASH_CELL_ID2 == readl_relaxed(&device_data->base->cellid2) &&
-	    HASH_CELL_ID3 == readl_relaxed(&device_data->base->cellid3)) {
-		return 0;
-	}
-
-	dev_err(device_data->dev, "%s: HASH_UNSUPPORTED_HW!\n", __func__);
-	return -ENOTSUPP;
-}
-
-/**
- * hash_get_digest - Gets the digest.
- * @device_data:	Pointer to the device structure.
- * @digest:		User allocated byte array for the calculated digest.
- * @algorithm:		The algorithm in use.
- */
-void hash_get_digest(struct hash_device_data *device_data,
-		     u8 *digest, int algorithm)
-{
-	u32 temp_hx_val, count;
-	int loop_ctr;
-
-	if (algorithm != HASH_ALGO_SHA1 && algorithm != HASH_ALGO_SHA256) {
-		dev_err(device_data->dev, "%s: Incorrect algorithm %d\n",
-			__func__, algorithm);
-		return;
-	}
-
-	if (algorithm == HASH_ALGO_SHA1)
-		loop_ctr = SHA1_DIGEST_SIZE / sizeof(u32);
-	else
-		loop_ctr = SHA256_DIGEST_SIZE / sizeof(u32);
-
-	dev_dbg(device_data->dev, "%s: digest array:(0x%lx)\n",
-		__func__, (unsigned long)digest);
-
-	/* Copy result into digest array */
-	for (count = 0; count < loop_ctr; count++) {
-		temp_hx_val = readl_relaxed(&device_data->base->hx[count]);
-		digest[count * 4] = (u8) ((temp_hx_val >> 24) & 0xFF);
-		digest[count * 4 + 1] = (u8) ((temp_hx_val >> 16) & 0xFF);
-		digest[count * 4 + 2] = (u8) ((temp_hx_val >> 8) & 0xFF);
-		digest[count * 4 + 3] = (u8) ((temp_hx_val >> 0) & 0xFF);
-	}
-}
-
-/**
- * ahash_update - The hash update function for SHA1/SHA2 (SHA256).
- * @req: The hash request for the job.
- */
-static int ahash_update(struct ahash_request *req)
-{
-	int ret = 0;
-	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
-
-	if (hash_mode != HASH_MODE_DMA || !req_ctx->dma_mode)
-		ret = hash_hw_update(req);
-	/* Skip update for DMA, all data will be passed to DMA in final */
-
-	if (ret) {
-		pr_err("%s: hash_hw_update() failed!\n", __func__);
-	}
-
-	return ret;
-}
-
-/**
- * ahash_final - The hash final function for SHA1/SHA2 (SHA256).
- * @req:	The hash request for the job.
- */
-static int ahash_final(struct ahash_request *req)
-{
-	int ret = 0;
-	struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
-
-	pr_debug("%s: data size: %d\n", __func__, req->nbytes);
-
-	if ((hash_mode == HASH_MODE_DMA) && req_ctx->dma_mode)
-		ret = hash_dma_final(req);
-	else
-		ret = hash_hw_final(req);
-
-	if (ret) {
-		pr_err("%s: hash_hw/dma_final() failed\n", __func__);
-	}
-
-	return ret;
-}
-
-static int hash_setkey(struct crypto_ahash *tfm,
-		       const u8 *key, unsigned int keylen, int alg)
-{
-	int ret = 0;
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-
-	/**
-	 * Freed in final.
-	 */
-	ctx->key = kmemdup(key, keylen, GFP_KERNEL);
-	if (!ctx->key) {
-		pr_err("%s: Failed to allocate ctx->key for %d\n",
-		       __func__, alg);
-		return -ENOMEM;
-	}
-	ctx->keylen = keylen;
-
-	return ret;
-}
-
-static int ahash_sha1_init(struct ahash_request *req)
-{
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-
-	ctx->config.data_format = HASH_DATA_8_BITS;
-	ctx->config.algorithm = HASH_ALGO_SHA1;
-	ctx->config.oper_mode = HASH_OPER_MODE_HASH;
-	ctx->digestsize = SHA1_DIGEST_SIZE;
-
-	return ux500_hash_init(req);
-}
-
-static int ahash_sha256_init(struct ahash_request *req)
-{
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-
-	ctx->config.data_format = HASH_DATA_8_BITS;
-	ctx->config.algorithm = HASH_ALGO_SHA256;
-	ctx->config.oper_mode = HASH_OPER_MODE_HASH;
-	ctx->digestsize = SHA256_DIGEST_SIZE;
-
-	return ux500_hash_init(req);
-}
-
-static int ahash_sha1_digest(struct ahash_request *req)
-{
-	int ret2, ret1;
-
-	ret1 = ahash_sha1_init(req);
-	if (ret1)
-		goto out;
-
-	ret1 = ahash_update(req);
-	ret2 = ahash_final(req);
-
-out:
-	return ret1 ? ret1 : ret2;
-}
-
-static int ahash_sha256_digest(struct ahash_request *req)
-{
-	int ret2, ret1;
-
-	ret1 = ahash_sha256_init(req);
-	if (ret1)
-		goto out;
-
-	ret1 = ahash_update(req);
-	ret2 = ahash_final(req);
-
-out:
-	return ret1 ? ret1 : ret2;
-}
-
-static int ahash_noimport(struct ahash_request *req, const void *in)
-{
-	return -ENOSYS;
-}
-
-static int ahash_noexport(struct ahash_request *req, void *out)
-{
-	return -ENOSYS;
-}
-
-static int hmac_sha1_init(struct ahash_request *req)
-{
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-
-	ctx->config.data_format	= HASH_DATA_8_BITS;
-	ctx->config.algorithm	= HASH_ALGO_SHA1;
-	ctx->config.oper_mode	= HASH_OPER_MODE_HMAC;
-	ctx->digestsize		= SHA1_DIGEST_SIZE;
-
-	return ux500_hash_init(req);
-}
-
-static int hmac_sha256_init(struct ahash_request *req)
-{
-	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
-	struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
-
-	ctx->config.data_format	= HASH_DATA_8_BITS;
-	ctx->config.algorithm	= HASH_ALGO_SHA256;
-	ctx->config.oper_mode	= HASH_OPER_MODE_HMAC;
-	ctx->digestsize		= SHA256_DIGEST_SIZE;
-
-	return ux500_hash_init(req);
-}
-
-static int hmac_sha1_digest(struct ahash_request *req)
-{
-	int ret2, ret1;
-
-	ret1 = hmac_sha1_init(req);
-	if (ret1)
-		goto out;
-
-	ret1 = ahash_update(req);
-	ret2 = ahash_final(req);
-
-out:
-	return ret1 ? ret1 : ret2;
-}
-
-static int hmac_sha256_digest(struct ahash_request *req)
-{
-	int ret2, ret1;
-
-	ret1 = hmac_sha256_init(req);
-	if (ret1)
-		goto out;
-
-	ret1 = ahash_update(req);
-	ret2 = ahash_final(req);
-
-out:
-	return ret1 ? ret1 : ret2;
-}
-
-static int hmac_sha1_setkey(struct crypto_ahash *tfm,
-			    const u8 *key, unsigned int keylen)
-{
-	return hash_setkey(tfm, key, keylen, HASH_ALGO_SHA1);
-}
-
-static int hmac_sha256_setkey(struct crypto_ahash *tfm,
-			      const u8 *key, unsigned int keylen)
-{
-	return hash_setkey(tfm, key, keylen, HASH_ALGO_SHA256);
-}
-
-struct hash_algo_template {
-	struct hash_config conf;
-	struct ahash_alg hash;
-};
-
-static int hash_cra_init(struct crypto_tfm *tfm)
-{
-	struct hash_ctx *ctx = crypto_tfm_ctx(tfm);
-	struct crypto_alg *alg = tfm->__crt_alg;
-	struct hash_algo_template *hash_alg;
-
-	hash_alg = container_of(__crypto_ahash_alg(alg),
-			struct hash_algo_template,
-			hash);
-
-	crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
-				 sizeof(struct hash_req_ctx));
-
-	ctx->config.data_format = HASH_DATA_8_BITS;
-	ctx->config.algorithm = hash_alg->conf.algorithm;
-	ctx->config.oper_mode = hash_alg->conf.oper_mode;
-
-	ctx->digestsize = hash_alg->hash.halg.digestsize;
-
-	return 0;
-}
-
-static struct hash_algo_template hash_algs[] = {
-	{
-		.conf.algorithm = HASH_ALGO_SHA1,
-		.conf.oper_mode = HASH_OPER_MODE_HASH,
-		.hash = {
-			.init = ux500_hash_init,
-			.update = ahash_update,
-			.final = ahash_final,
-			.digest = ahash_sha1_digest,
-			.export = ahash_noexport,
-			.import = ahash_noimport,
-			.halg.digestsize = SHA1_DIGEST_SIZE,
-			.halg.statesize = sizeof(struct hash_ctx),
-			.halg.base = {
-				.cra_name = "sha1",
-				.cra_driver_name = "sha1-ux500",
-				.cra_flags = CRYPTO_ALG_ASYNC,
-				.cra_blocksize = SHA1_BLOCK_SIZE,
-				.cra_ctxsize = sizeof(struct hash_ctx),
-				.cra_init = hash_cra_init,
-				.cra_module = THIS_MODULE,
-			}
-		}
-	},
-	{
-		.conf.algorithm	= HASH_ALGO_SHA256,
-		.conf.oper_mode	= HASH_OPER_MODE_HASH,
-		.hash = {
-			.init = ux500_hash_init,
-			.update	= ahash_update,
-			.final = ahash_final,
-			.digest = ahash_sha256_digest,
-			.export = ahash_noexport,
-			.import = ahash_noimport,
-			.halg.digestsize = SHA256_DIGEST_SIZE,
-			.halg.statesize = sizeof(struct hash_ctx),
-			.halg.base = {
-				.cra_name = "sha256",
-				.cra_driver_name = "sha256-ux500",
-				.cra_flags = CRYPTO_ALG_ASYNC,
-				.cra_blocksize = SHA256_BLOCK_SIZE,
-				.cra_ctxsize = sizeof(struct hash_ctx),
-				.cra_init = hash_cra_init,
-				.cra_module = THIS_MODULE,
-			}
-		}
-	},
-	{
-		.conf.algorithm = HASH_ALGO_SHA1,
-		.conf.oper_mode = HASH_OPER_MODE_HMAC,
-			.hash = {
-			.init = ux500_hash_init,
-			.update = ahash_update,
-			.final = ahash_final,
-			.digest = hmac_sha1_digest,
-			.setkey = hmac_sha1_setkey,
-			.export = ahash_noexport,
-			.import = ahash_noimport,
-			.halg.digestsize = SHA1_DIGEST_SIZE,
-			.halg.statesize = sizeof(struct hash_ctx),
-			.halg.base = {
-				.cra_name = "hmac(sha1)",
-				.cra_driver_name = "hmac-sha1-ux500",
-				.cra_flags = CRYPTO_ALG_ASYNC,
-				.cra_blocksize = SHA1_BLOCK_SIZE,
-				.cra_ctxsize = sizeof(struct hash_ctx),
-				.cra_init = hash_cra_init,
-				.cra_module = THIS_MODULE,
-			}
-		}
-	},
-	{
-		.conf.algorithm = HASH_ALGO_SHA256,
-		.conf.oper_mode = HASH_OPER_MODE_HMAC,
-		.hash = {
-			.init = ux500_hash_init,
-			.update = ahash_update,
-			.final = ahash_final,
-			.digest = hmac_sha256_digest,
-			.setkey = hmac_sha256_setkey,
-			.export = ahash_noexport,
-			.import = ahash_noimport,
-			.halg.digestsize = SHA256_DIGEST_SIZE,
-			.halg.statesize = sizeof(struct hash_ctx),
-			.halg.base = {
-				.cra_name = "hmac(sha256)",
-				.cra_driver_name = "hmac-sha256-ux500",
-				.cra_flags = CRYPTO_ALG_ASYNC,
-				.cra_blocksize = SHA256_BLOCK_SIZE,
-				.cra_ctxsize = sizeof(struct hash_ctx),
-				.cra_init = hash_cra_init,
-				.cra_module = THIS_MODULE,
-			}
-		}
-	}
-};
-
-static int ahash_algs_register_all(struct hash_device_data *device_data)
-{
-	int ret;
-	int i;
-	int count;
-
-	for (i = 0; i < ARRAY_SIZE(hash_algs); i++) {
-		ret = crypto_register_ahash(&hash_algs[i].hash);
-		if (ret) {
-			count = i;
-			dev_err(device_data->dev, "%s: alg registration failed\n",
-				hash_algs[i].hash.halg.base.cra_driver_name);
-			goto unreg;
-		}
-	}
-	return 0;
-unreg:
-	for (i = 0; i < count; i++)
-		crypto_unregister_ahash(&hash_algs[i].hash);
-	return ret;
-}
-
-static void ahash_algs_unregister_all(struct hash_device_data *device_data)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(hash_algs); i++)
-		crypto_unregister_ahash(&hash_algs[i].hash);
-}
-
-/**
- * ux500_hash_probe - Function that probes the hash hardware.
- * @pdev: The platform device.
- */
-static int ux500_hash_probe(struct platform_device *pdev)
-{
-	int			ret = 0;
-	struct resource		*res = NULL;
-	struct hash_device_data *device_data;
-	struct device		*dev = &pdev->dev;
-
-	device_data = devm_kzalloc(dev, sizeof(*device_data), GFP_KERNEL);
-	if (!device_data) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	device_data->dev = dev;
-	device_data->current_ctx = NULL;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_dbg(dev, "%s: platform_get_resource() failed!\n", __func__);
-		ret = -ENODEV;
-		goto out;
-	}
-
-	device_data->phybase = res->start;
-	device_data->base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(device_data->base)) {
-		ret = PTR_ERR(device_data->base);
-		goto out;
-	}
-	spin_lock_init(&device_data->ctx_lock);
-	spin_lock_init(&device_data->power_state_lock);
-
-	/* Enable power for HASH1 hardware block */
-	device_data->regulator = regulator_get(dev, "v-ape");
-	if (IS_ERR(device_data->regulator)) {
-		dev_err(dev, "%s: regulator_get() failed!\n", __func__);
-		ret = PTR_ERR(device_data->regulator);
-		device_data->regulator = NULL;
-		goto out;
-	}
-
-	/* Enable the clock for HASH1 hardware block */
-	device_data->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(device_data->clk)) {
-		dev_err(dev, "%s: clk_get() failed!\n", __func__);
-		ret = PTR_ERR(device_data->clk);
-		goto out_regulator;
-	}
-
-	ret = clk_prepare(device_data->clk);
-	if (ret) {
-		dev_err(dev, "%s: clk_prepare() failed!\n", __func__);
-		goto out_regulator;
-	}
-
-	/* Enable device power (and clock) */
-	ret = hash_enable_power(device_data, false);
-	if (ret) {
-		dev_err(dev, "%s: hash_enable_power() failed!\n", __func__);
-		goto out_clk_unprepare;
-	}
-
-	ret = hash_check_hw(device_data);
-	if (ret) {
-		dev_err(dev, "%s: hash_check_hw() failed!\n", __func__);
-		goto out_power;
-	}
-
-	if (hash_mode == HASH_MODE_DMA)
-		hash_dma_setup_channel(device_data, dev);
-
-	platform_set_drvdata(pdev, device_data);
-
-	/* Put the new device into the device list... */
-	klist_add_tail(&device_data->list_node, &driver_data.device_list);
-	/* ... and signal that a new device is available. */
-	up(&driver_data.device_allocation);
-
-	ret = ahash_algs_register_all(device_data);
-	if (ret) {
-		dev_err(dev, "%s: ahash_algs_register_all() failed!\n",
-			__func__);
-		goto out_power;
-	}
-
-	dev_info(dev, "successfully registered\n");
-	return 0;
-
-out_power:
-	hash_disable_power(device_data, false);
-
-out_clk_unprepare:
-	clk_unprepare(device_data->clk);
-
-out_regulator:
-	regulator_put(device_data->regulator);
-
-out:
-	return ret;
-}
-
-/**
- * ux500_hash_remove - Function that removes the hash device from the platform.
- * @pdev: The platform device.
- */
-static int ux500_hash_remove(struct platform_device *pdev)
-{
-	struct hash_device_data *device_data;
-	struct device		*dev = &pdev->dev;
-
-	device_data = platform_get_drvdata(pdev);
-	if (!device_data) {
-		dev_err(dev, "%s: platform_get_drvdata() failed!\n", __func__);
-		return -ENOMEM;
-	}
-
-	/* Try to decrease the number of available devices. */
-	if (down_trylock(&driver_data.device_allocation))
-		return -EBUSY;
-
-	/* Check that the device is free */
-	spin_lock(&device_data->ctx_lock);
-	/* current_ctx allocates a device, NULL = unallocated */
-	if (device_data->current_ctx) {
-		/* The device is busy */
-		spin_unlock(&device_data->ctx_lock);
-		/* Return the device to the pool. */
-		up(&driver_data.device_allocation);
-		return -EBUSY;
-	}
-
-	spin_unlock(&device_data->ctx_lock);
-
-	/* Remove the device from the list */
-	if (klist_node_attached(&device_data->list_node))
-		klist_remove(&device_data->list_node);
-
-	/* If this was the last device, remove the services */
-	if (list_empty(&driver_data.device_list.k_list))
-		ahash_algs_unregister_all(device_data);
-
-	if (hash_disable_power(device_data, false))
-		dev_err(dev, "%s: hash_disable_power() failed\n",
-			__func__);
-
-	clk_unprepare(device_data->clk);
-	regulator_put(device_data->regulator);
-
-	return 0;
-}
-
-/**
- * ux500_hash_shutdown - Function that shutdown the hash device.
- * @pdev: The platform device
- */
-static void ux500_hash_shutdown(struct platform_device *pdev)
-{
-	struct hash_device_data *device_data;
-
-	device_data = platform_get_drvdata(pdev);
-	if (!device_data) {
-		dev_err(&pdev->dev, "%s: platform_get_drvdata() failed!\n",
-			__func__);
-		return;
-	}
-
-	/* Check that the device is free */
-	spin_lock(&device_data->ctx_lock);
-	/* current_ctx allocates a device, NULL = unallocated */
-	if (!device_data->current_ctx) {
-		if (down_trylock(&driver_data.device_allocation))
-			dev_dbg(&pdev->dev, "%s: Cryp still in use! Shutting down anyway...\n",
-				__func__);
-		/**
-		 * (Allocate the device)
-		 * Need to set this to non-null (dummy) value,
-		 * to avoid usage if context switching.
-		 */
-		device_data->current_ctx++;
-	}
-	spin_unlock(&device_data->ctx_lock);
-
-	/* Remove the device from the list */
-	if (klist_node_attached(&device_data->list_node))
-		klist_remove(&device_data->list_node);
-
-	/* If this was the last device, remove the services */
-	if (list_empty(&driver_data.device_list.k_list))
-		ahash_algs_unregister_all(device_data);
-
-	if (hash_disable_power(device_data, false))
-		dev_err(&pdev->dev, "%s: hash_disable_power() failed\n",
-			__func__);
-}
-
-#ifdef CONFIG_PM_SLEEP
-/**
- * ux500_hash_suspend - Function that suspends the hash device.
- * @dev:	Device to suspend.
- */
-static int ux500_hash_suspend(struct device *dev)
-{
-	int ret;
-	struct hash_device_data *device_data;
-	struct hash_ctx *temp_ctx = NULL;
-
-	device_data = dev_get_drvdata(dev);
-	if (!device_data) {
-		dev_err(dev, "%s: platform_get_drvdata() failed!\n", __func__);
-		return -ENOMEM;
-	}
-
-	spin_lock(&device_data->ctx_lock);
-	if (!device_data->current_ctx)
-		device_data->current_ctx++;
-	spin_unlock(&device_data->ctx_lock);
-
-	if (device_data->current_ctx == ++temp_ctx) {
-		if (down_interruptible(&driver_data.device_allocation))
-			dev_dbg(dev, "%s: down_interruptible() failed\n",
-				__func__);
-		ret = hash_disable_power(device_data, false);
-
-	} else {
-		ret = hash_disable_power(device_data, true);
-	}
-
-	if (ret)
-		dev_err(dev, "%s: hash_disable_power()\n", __func__);
-
-	return ret;
-}
-
-/**
- * ux500_hash_resume - Function that resume the hash device.
- * @dev:	Device to resume.
- */
-static int ux500_hash_resume(struct device *dev)
-{
-	int ret = 0;
-	struct hash_device_data *device_data;
-	struct hash_ctx *temp_ctx = NULL;
-
-	device_data = dev_get_drvdata(dev);
-	if (!device_data) {
-		dev_err(dev, "%s: platform_get_drvdata() failed!\n", __func__);
-		return -ENOMEM;
-	}
-
-	spin_lock(&device_data->ctx_lock);
-	if (device_data->current_ctx == ++temp_ctx)
-		device_data->current_ctx = NULL;
-	spin_unlock(&device_data->ctx_lock);
-
-	if (!device_data->current_ctx)
-		up(&driver_data.device_allocation);
-	else
-		ret = hash_enable_power(device_data, true);
-
-	if (ret)
-		dev_err(dev, "%s: hash_enable_power() failed!\n", __func__);
-
-	return ret;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(ux500_hash_pm, ux500_hash_suspend, ux500_hash_resume);
-
-static const struct of_device_id ux500_hash_match[] = {
-	{ .compatible = "stericsson,ux500-hash" },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, ux500_hash_match);
-
-static struct platform_driver hash_driver = {
-	.probe  = ux500_hash_probe,
-	.remove = ux500_hash_remove,
-	.shutdown = ux500_hash_shutdown,
-	.driver = {
-		.name  = "hash1",
-		.of_match_table = ux500_hash_match,
-		.pm    = &ux500_hash_pm,
-	}
-};
-
-/**
- * ux500_hash_mod_init - The kernel module init function.
- */
-static int __init ux500_hash_mod_init(void)
-{
-	klist_init(&driver_data.device_list, NULL, NULL);
-	/* Initialize the semaphore to 0 devices (locked state) */
-	sema_init(&driver_data.device_allocation, 0);
-
-	return platform_driver_register(&hash_driver);
-}
-
-/**
- * ux500_hash_mod_fini - The kernel module exit function.
- */
-static void __exit ux500_hash_mod_fini(void)
-{
-	platform_driver_unregister(&hash_driver);
-}
-
-module_init(ux500_hash_mod_init);
-module_exit(ux500_hash_mod_fini);
-
-MODULE_DESCRIPTION("Driver for ST-Ericsson UX500 HASH engine.");
-MODULE_LICENSE("GPL");
-
-MODULE_ALIAS_CRYPTO("sha1-all");
-MODULE_ALIAS_CRYPTO("sha256-all");
-MODULE_ALIAS_CRYPTO("hmac-sha1-all");
-MODULE_ALIAS_CRYPTO("hmac-sha256-all");

-- 
2.39.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/6] crypto: stm32 hash - reuse for Ux500

[Herbert Xu]

On Wed, Jan 25, 2023 at 01:23:06AM +0100, Linus Walleij wrote:
> By taking some small portions of the Ux500 HASH driver and
> adding to the STM32 driver, it turns out we can support both
> platforms with the more modern STM32 driver.
> 
> The STM32 driver is more modern and compact thanks to using
> things like the crypto engine.
> 
> We add a polled mode since the Ux500 does not have any
> interrupt. Incidentally, this could perhaps be re-used to
> implement synchronous mode, if this is desireable.
> 
> To: Herbert Xu <herbert@gondor.apana.org.au>
> To: "David S. Miller" <davem@davemloft.net>
> To: Rob Herring <robh+dt@kernel.org>
> To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> To: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> To: Alexandre Torgue <alexandre.torgue@foss.st.com>
> To: Lionel Debieve <lionel.debieve@foss.st.com>
> Cc: linux-crypto@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-stm32@st-md-mailman.stormreply.com
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> 
> ---
> Changes in v3:
> - Allocate the synchronous fallback algorithm in .cra_init()
>   and free it in .cra_exit().
> - Pick up some review tags.
> - Link to v2: https://lore.kernel.org/r/20221227-ux500-stm32-hash-v2-0-bc443bc44ca4@linaro.org
> 
> Changes in v2:
> - Use an else-clause in the DT bindings.
> - Fix up issues pointed out by Lionel in the driver extension.
> - Dropped the patch converting dma_mode to a bool after
>   Lionel explained how this works.
> - Link to v1: https://lore.kernel.org/r/20221227-ux500-stm32-hash-v1-0-b637ac4cda01@linaro.org
> 
> ---
> Linus Walleij (6):
>       dt-bindings: crypto: Let STM32 define Ux500 HASH
>       crypto: stm32/hash: Simplify code
>       crypto: stm32/hash: Use existing busy poll function
>       crypto: stm32/hash: Wait for idle before final CPU xmit
>       crypto: stm32/hash: Support Ux500 hash
>       crypto: ux500/hash - delete driver
> 
>  .../devicetree/bindings/crypto/st,stm32-hash.yaml  |   23 +-
>  drivers/crypto/Kconfig                             |   10 -
>  drivers/crypto/Makefile                            |    1 -
>  drivers/crypto/stm32/stm32-hash.c                  |  266 ++-
>  drivers/crypto/ux500/Kconfig                       |   22 -
>  drivers/crypto/ux500/Makefile                      |    7 -
>  drivers/crypto/ux500/hash/Makefile                 |   11 -
>  drivers/crypto/ux500/hash/hash_alg.h               |  398 ----
>  drivers/crypto/ux500/hash/hash_core.c              | 1966 --------------------
>  9 files changed, 249 insertions(+), 2455 deletions(-)
> ---
> base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2
> change-id: 20221227-ux500-stm32-hash-9ee26834292f
> 
> Best regards,
> -- 
> Linus Walleij <linus.walleij@linaro.org>

All applied.  Thanks.
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/6] crypto: stm32 hash - reuse for Ux500

[Herbert Xu]

On Wed, Jan 25, 2023 at 01:23:06AM +0100, Linus Walleij wrote:
> By taking some small portions of the Ux500 HASH driver and
> adding to the STM32 driver, it turns out we can support both
> platforms with the more modern STM32 driver.
> 
> The STM32 driver is more modern and compact thanks to using
> things like the crypto engine.
> 
> We add a polled mode since the Ux500 does not have any
> interrupt. Incidentally, this could perhaps be re-used to
> implement synchronous mode, if this is desireable.
> 
> To: Herbert Xu <herbert@gondor.apana.org.au>
> To: "David S. Miller" <davem@davemloft.net>
> To: Rob Herring <robh+dt@kernel.org>
> To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> To: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> To: Alexandre Torgue <alexandre.torgue@foss.st.com>
> To: Lionel Debieve <lionel.debieve@foss.st.com>
> Cc: linux-crypto@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-stm32@st-md-mailman.stormreply.com
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> 
> ---
> Changes in v3:
> - Allocate the synchronous fallback algorithm in .cra_init()
>   and free it in .cra_exit().
> - Pick up some review tags.
> - Link to v2: https://lore.kernel.org/r/20221227-ux500-stm32-hash-v2-0-bc443bc44ca4@linaro.org
> 
> Changes in v2:
> - Use an else-clause in the DT bindings.
> - Fix up issues pointed out by Lionel in the driver extension.
> - Dropped the patch converting dma_mode to a bool after
>   Lionel explained how this works.
> - Link to v1: https://lore.kernel.org/r/20221227-ux500-stm32-hash-v1-0-b637ac4cda01@linaro.org
> 
> ---
> Linus Walleij (6):
>       dt-bindings: crypto: Let STM32 define Ux500 HASH
>       crypto: stm32/hash: Simplify code
>       crypto: stm32/hash: Use existing busy poll function
>       crypto: stm32/hash: Wait for idle before final CPU xmit
>       crypto: stm32/hash: Support Ux500 hash
>       crypto: ux500/hash - delete driver
> 
>  .../devicetree/bindings/crypto/st,stm32-hash.yaml  |   23 +-
>  drivers/crypto/Kconfig                             |   10 -
>  drivers/crypto/Makefile                            |    1 -
>  drivers/crypto/stm32/stm32-hash.c                  |  266 ++-
>  drivers/crypto/ux500/Kconfig                       |   22 -
>  drivers/crypto/ux500/Makefile                      |    7 -
>  drivers/crypto/ux500/hash/Makefile                 |   11 -
>  drivers/crypto/ux500/hash/hash_alg.h               |  398 ----
>  drivers/crypto/ux500/hash/hash_core.c              | 1966 --------------------
>  9 files changed, 249 insertions(+), 2455 deletions(-)
> ---
> base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2
> change-id: 20221227-ux500-stm32-hash-9ee26834292f
> 
> Best regards,
> -- 
> Linus Walleij <linus.walleij@linaro.org>

All applied.  Thanks.
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt