All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Wetzel <alexander@wetzel-home.de>
To: linux-wireless@vger.kernel.org
Cc: johannes@sipsolutions.net, Alexander Wetzel <alexander@wetzel-home.de>
Subject: [PATCH] wifi: mac80211: sdata can be NULL during AMPDU start
Date: Fri, 30 Dec 2022 13:18:50 +0100	[thread overview]
Message-ID: <20221230121850.218810-2-alexander@wetzel-home.de> (raw)
In-Reply-To: <20221230121850.218810-1-alexander@wetzel-home.de>

ieee80211_tx_ba_session_handle_start() may get NULL for sdata when a
deauthentication is ongoing.

Here a trace triggering the race with the hostapd test
multi_ap_fronthaul_on_ap:

(gdb) list *drv_ampdu_action+0x46
0x8b16 is in drv_ampdu_action (net/mac80211/driver-ops.c:396).
391             int ret = -EOPNOTSUPP;
392
393             might_sleep();
394
395             sdata = get_bss_sdata(sdata);
396             if (!check_sdata_in_driver(sdata))
397                     return -EIO;
398
399             trace_drv_ampdu_action(local, sdata, params);
400

wlan0: moving STA 02:00:00:00:03:00 to state 3
wlan0: associated
wlan0: deauthenticating from 02:00:00:00:03:00 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan3.sta1: Open BA session requested for 02:00:00:00:00:00 tid 0
wlan3.sta1: dropped frame to 02:00:00:00:00:00 (unauthorized port)
wlan0: moving STA 02:00:00:00:03:00 to state 2
wlan0: moving STA 02:00:00:00:03:00 to state 1
wlan0: Removed STA 02:00:00:00:03:00
wlan0: Destroyed STA 02:00:00:00:03:00
BUG: unable to handle page fault for address: fffffffffffffb48
PGD 11814067 P4D 11814067 PUD 11816067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 2 PID: 133397 Comm: kworker/u16:1 Tainted: G        W          6.1.0-rc8-wt+ #59
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
Workqueue: phy3 ieee80211_ba_session_work [mac80211]
RIP: 0010:drv_ampdu_action+0x46/0x280 [mac80211]
Code: 53 48 89 f3 be 89 01 00 00 e8 d6 43 bf ef e8 21 46 81 f0 83 bb a0 1b 00 00 04 75 0e 48 8b 9b 28 0d 00 00 48 81 eb 10 0e 00 00 <8b> 93 58 09 00 00 f6 c2 20 0f 84 3b 01 00 00 8b 05 dd 1c 0f 00 85
RSP: 0018:ffffc900025ebd20 EFLAGS: 00010287
RAX: 0000000000000000 RBX: fffffffffffff1f0 RCX: ffff888102228240
RDX: 0000000080000000 RSI: ffffffff918c5de0 RDI: ffff888102228b40
RBP: ffffc900025ebd40 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: ffff888118c18ec0
R13: 0000000000000000 R14: ffffc900025ebd60 R15: ffff888018b7efb8
FS:  0000000000000000(0000) GS:ffff88817a600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffffffffffb48 CR3: 0000000105228006 CR4: 0000000000170ee0
Call Trace:
 <TASK>
 ieee80211_tx_ba_session_handle_start+0xd0/0x190 [mac80211]
 ieee80211_ba_session_work+0xff/0x2e0 [mac80211]
 process_one_work+0x29f/0x620
 worker_thread+0x4d/0x3d0
 ? process_one_work+0x620/0x620
 kthread+0xfb/0x120
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30
 </TASK>

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>

---
The fix is not perfect, we still dereference sdata and use it without
any strong guarantee that it's still valid. But I don't see another
solution here without fundamental changes. With the patch I'm unable to
trigger the issue any longer. Other attempts to fix it failed in that
regard...

Alexander
---
 net/mac80211/agg-tx.c     | 6 +++++-
 net/mac80211/driver-ops.c | 3 +++
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 9c40f8d3bce8..3dbb724d7dc4 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -491,7 +491,7 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 {
 	struct tid_ampdu_tx *tid_tx;
 	struct ieee80211_local *local = sta->local;
-	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_sub_if_data *sdata;
 	struct ieee80211_ampdu_params params = {
 		.sta = &sta->sta,
 		.action = IEEE80211_AMPDU_TX_START,
@@ -521,6 +521,7 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 	 */
 	synchronize_net();
 
+	sdata = sta->sdata;
 	params.ssn = sta->tid_seq[tid] >> 4;
 	ret = drv_ampdu_action(local, sdata, &params);
 	tid_tx->ssn = params.ssn;
@@ -534,6 +535,9 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 		 */
 		set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state);
 	} else if (ret) {
+		if (!sdata)
+			return;
+
 		ht_dbg(sdata,
 		       "BA request denied - HW unavailable for %pM tid %d\n",
 		       sta->sta.addr, tid);
diff --git a/net/mac80211/driver-ops.c b/net/mac80211/driver-ops.c
index d737db4e07e2..cfb09e4aed4d 100644
--- a/net/mac80211/driver-ops.c
+++ b/net/mac80211/driver-ops.c
@@ -392,6 +392,9 @@ int drv_ampdu_action(struct ieee80211_local *local,
 
 	might_sleep();
 
+	if (!sdata)
+		return -EIO;
+
 	sdata = get_bss_sdata(sdata);
 	if (!check_sdata_in_driver(sdata))
 		return -EIO;
-- 
2.39.0


  reply	other threads:[~2022-12-30 12:19 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-30 12:18 [PATCH] wifi: mac80211: Proper mark iTXQs for resumption Alexander Wetzel
2022-12-30 12:18 ` Alexander Wetzel [this message]
2023-01-10 19:33 ` Bryan O'Donoghue
2023-01-10 19:35 ` Bryan O'Donoghue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221230121850.218810-2-alexander@wetzel-home.de \
    --to=alexander@wetzel-home.de \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.