From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id A39A3C54EBD for ; Fri, 13 Jan 2023 10:39:39 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241368AbjAMKjf (ORCPT ); Fri, 13 Jan 2023 05:39:35 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38548 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241349AbjAMKie (ORCPT ); Fri, 13 Jan 2023 05:38:34 -0500 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::229]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id EB99A3F10D; Fri, 13 Jan 2023 02:38:10 -0800 (PST) Received: (Authenticated sender: herve.codina@bootlin.com) by mail.gandi.net (Postfix) with ESMTPA id 36677FF812; Fri, 13 Jan 2023 10:38:06 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1673606289; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=e9+cZzguFSROPV4tCZLD7SaeW4MY38Tng5UQywdd1Oo=; b=jS1gu5zvJRx9adaZfWf64nRyetSxBLADYSnm1YSic+J+cl+2Vz+aILzoDS+QEqraJBobg1 O9jX1WxQrV4+Gc33rnj2RNubSIAyKoKK+7EKRXFizUBWWb7Jo+YXgae/HkPJCwPjAE0o9/ lMhSvev9094xq5e747WPtNp2Oh4qCOUENIzTfqr/KIr381ttlNaYkmlKnZlHzTX0+Bm738 xqza2VCN2rdRWHLBYdWHeqpjyS+ylHZqBgmcI01X6l0g0dUUhafOgNwjlQug8wx42/aoVp DFHxEggGylNZ+yxM+KxwzTKrmuxluVmqd3TbcVB74lTEVwDrFP/VPXHjY75+VA== From: Herve Codina To: Herve Codina , Li Yang , Rob Herring , Krzysztof Kozlowski , Liam Girdwood , Mark Brown , Christophe Leroy , Michael Ellerman , Nicholas Piggin , Qiang Zhao , Jaroslav Kysela , Takashi Iwai , Shengjiu Wang , Xiubo Li , Fabio Estevam , Nicolin Chen Cc: linuxppc-dev@lists.ozlabs.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org, Thomas Petazzoni Subject: [PATCH v3 01/10] dt-bindings: soc: fsl: cpm_qe: Add TSA controller Date: Fri, 13 Jan 2023 11:37:50 +0100 Message-Id: <20230113103759.327698-2-herve.codina@bootlin.com> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20230113103759.327698-1-herve.codina@bootlin.com> References: <20230113103759.327698-1-herve.codina@bootlin.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add support for the time slot assigner (TSA) available in some PowerQUICC SoC such as MPC885 or MPC866. Signed-off-by: Herve Codina --- .../bindings/soc/fsl/cpm_qe/fsl,tsa.yaml | 260 ++++++++++++++++++ include/dt-bindings/soc/fsl,tsa.h | 13 + 2 files changed, 273 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml create mode 100644 include/dt-bindings/soc/fsl,tsa.h diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml new file mode 100644 index 000000000000..eb17b6119abd --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml @@ -0,0 +1,260 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,tsa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PowerQUICC CPM Time-slot assigner (TSA) controller + +maintainers: + - Herve Codina + +description: | + The TSA is the time-slot assigner that can be found on some + PowerQUICC SoC. + Its purpose is to route some TDM time-slots to other internal + serial controllers. + +properties: + compatible: + items: + - enum: + - fsl,mpc885-tsa + - fsl,mpc866-tsa + - const: fsl,cpm1-tsa + + reg: + items: + - description: SI (Serial Interface) register base + - description: SI RAM base + + reg-names: + items: + - const: si_regs + - const: si_ram + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^tdm@[0-1]$': + description: + The TDM managed by this controller + type: object + + properties: + reg: + minimum: 0 + maximum: 1 + description: + The TDM number for this TDM, 0 for TDMa and 1 for TDMb + + fsl,common-rxtx-pins: + $ref: /schemas/types.yaml#/definitions/flag + description: + The hardware can use four dedicated pins for Tx clock, + Tx sync, Rx clock and Rx sync or use only two pins, + Tx/Rx clock and Rx/Rx sync. + Without the 'fsl,common-rxtx-pins' property, the four + pins are used. With the 'fsl,common-rxtx-pins' property, + two pins are used. + + clocks: + minItems: 2 + maxItems: 4 + + clock-names: + minItems: 2 + maxItems: 4 + + fsl,mode: + $ref: /schemas/types.yaml#/definitions/string + enum: [normal, echo, internal-loopback, control-loopback] + default: normal + description: | + Operational mode: + - normal: + Normal operation + - echo: + Automatic echo. Rx data is resent on Tx + - internal-loopback: + The TDM transmitter is connected to the receiver. + Data appears on Tx pin. + - control-loopback: + The TDM transmitter is connected to the receiver. + The Tx pin is disconnected. + + fsl,rx-frame-sync-delay-bits: + enum: [0, 1, 2, 3] + default: 0 + description: | + Receive frame sync delay in number of bits. + Indicates the delay between the Rx sync and the first bit of the + Rx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. + + fsl,tx-frame-sync-delay-bits: + enum: [0, 1, 2, 3] + default: 0 + description: | + Transmit frame sync delay in number of bits. + Indicates the delay between the Tx sync and the first bit of the + Tx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. + + fsl,clock-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Data is sent on falling edge of the clock (and received on the + rising edge). + If 'clock-falling-edge' is not present, data is sent on the + rising edge (and received on the falling edge). + + fsl,fsync-rising-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Frame sync pulses are sampled with the rising edge of the channel + clock. If 'fsync-rising-edge' is not present, pulses are sample + with e falling edge. + + fsl,double-speed-clock: + $ref: /schemas/types.yaml#/definitions/flag + description: + The channel clock is twice the data rate. + + fsl,tx-ts-routes: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + A list of tupple that indicates the Tx time-slots routes. + tx_ts_routes = + < 2 0 >, /* The first 2 time slots are not used */ + < 3 1 >, /* The next 3 ones are route to SCC2 */ + < 4 0 >, /* The next 4 ones are not used */ + < 2 2 >; /* The nest 2 ones are route to SCC3 */ + items: + items: + - description: + The number of time-slots + minimum: 1 + maximum: 64 + - description: | + The source serial interface (dt-bindings/soc/fsl,tsa.h + defines these values) + - 0: No destination + - 1: SCC2 + - 2: SCC3 + - 3: SCC4 + - 4: SMC1 + - 5: SMC2 + enum: [0, 1, 2, 3, 4, 5] + minItems: 1 + maxItems: 64 + + fsl,rx-ts-routes: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + A list of tupple that indicates the Rx time-slots routes. + tx_ts_routes = + < 2 0 >, /* The first 2 time slots are not used */ + < 3 1 >, /* The next 3 ones are route from SCC2 */ + < 4 0 >, /* The next 4 ones are not used */ + < 2 2 >; /* The nest 2 ones are route from SCC3 */ + items: + items: + - description: + The number of time-slots + minimum: 1 + maximum: 64 + - description: | + The destination serial interface (dt-bindings/soc/fsl,tsa.h + defines these values) + - 0: No destination + - 1: SCC2 + - 2: SCC3 + - 3: SCC4 + - 4: SMC1 + - 5: SMC2 + enum: [0, 1, 2, 3, 4, 5] + minItems: 1 + maxItems: 64 + + allOf: + # If fsl,common-rxtx-pins is present, only 2 clocks are needed. + # Else, the 4 clocks must be present. + - if: + required: + - fsl,common-rxtx-pins + then: + properties: + clocks: + items: + - description: External clock connected to L1RSYNC pin + - description: External clock connected to L1RCLK pin + clock-names: + items: + - const: l1rsync + - const: l1rclk + else: + properties: + clocks: + items: + - description: External clock connected to L1RSYNC pin + - description: External clock connected to L1RCLK pin + - description: External clock connected to L1TSYNC pin + - description: External clock connected to L1TCLK pin + clock-names: + items: + - const: l1rsync + - const: l1rclk + - const: l1tsync + - const: l1tclk + + required: + - reg + - clocks + - clock-names + +required: + - compatible + - reg + - reg-names + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include + + tsa@ae0 { + compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa"; + reg = <0xae0 0x10>, + <0xc00 0x200>; + reg-names = "si_regs", "si_ram"; + + #address-cells = <1>; + #size-cells = <0>; + + tdm@0 { + /* TDMa */ + reg = <0>; + + clocks = <&clk_l1rsynca>, <&clk_l1rclka>; + clock-names = "l1rsync", "l1rclk"; + + fsl,common-rxtx-pins; + fsl,fsync-rising-edge; + + fsl,tx-ts-routes = < 2 0 >, /* TS 0..1 */ + < 24 FSL_CPM_TSA_SCC4 >, /* TS 2..25 */ + < 1 0 >, /* TS 26 */ + < 5 FSL_CPM_TSA_SCC3 >; /* TS 27..31 */ + + fsl,rx-ts-routes = < 2 0 >, /* TS 0..1 */ + < 24 FSL_CPM_TSA_SCC4 >, /* 2..25 */ + < 1 0 >, /* TS 26 */ + < 5 FSL_CPM_TSA_SCC3 >; /* TS 27..31 */ + }; + }; diff --git a/include/dt-bindings/soc/fsl,tsa.h b/include/dt-bindings/soc/fsl,tsa.h new file mode 100644 index 000000000000..2cc44e867dbe --- /dev/null +++ b/include/dt-bindings/soc/fsl,tsa.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ + +#ifndef __DT_BINDINGS_SOC_FSL_TSA_H +#define __DT_BINDINGS_SOC_FSL_TSA_H + +#define FSL_CPM_TSA_NU 0 /* Pseuso Cell Id for not used item */ +#define FSL_CPM_TSA_SCC2 1 +#define FSL_CPM_TSA_SCC3 2 +#define FSL_CPM_TSA_SCC4 3 +#define FSL_CPM_TSA_SMC1 4 +#define FSL_CPM_TSA_SMC2 5 + +#endif -- 2.38.1 From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 8C9ADC61DB3 for ; Fri, 13 Jan 2023 10:39:59 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 6E245A09B; Fri, 13 Jan 2023 11:39:07 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 6E245A09B DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1673606397; bh=y21cuYCAYg/VUf4BbAoVDCObICtf8kwgY6mhj+WJV+E=; h=From:To:Subject:Date:In-Reply-To:References:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: Cc:From; b=gcF/VJlaNc3QEri5VdPM45yhJ/HKXyngU3UTCoXHi3T3dtpd7ej+O9l1W/pWKe26v nFwExBP1LEqvA90kvGJ9DYP/WNGypmZk388CTz5LwJvcRV0HRwCbG87yqNyL89HTwr m1JCIhnvaSABaEVrcbdxsDJMkUh22k5BcnKqBuAY= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id 6CCF5F80543; Fri, 13 Jan 2023 11:38:24 +0100 (CET) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 75CEDF8053A; Fri, 13 Jan 2023 11:38:23 +0100 (CET) Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 4510DF8019B for ; Fri, 13 Jan 2023 11:38:09 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 4510DF8019B Authentication-Results: alsa1.perex.cz; dkim=pass (2048-bit key, unprotected) header.d=bootlin.com header.i=@bootlin.com header.a=rsa-sha256 header.s=gm1 header.b=jS1gu5zv Received: (Authenticated sender: herve.codina@bootlin.com) by mail.gandi.net (Postfix) with ESMTPA id 36677FF812; Fri, 13 Jan 2023 10:38:06 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1673606289; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=e9+cZzguFSROPV4tCZLD7SaeW4MY38Tng5UQywdd1Oo=; b=jS1gu5zvJRx9adaZfWf64nRyetSxBLADYSnm1YSic+J+cl+2Vz+aILzoDS+QEqraJBobg1 O9jX1WxQrV4+Gc33rnj2RNubSIAyKoKK+7EKRXFizUBWWb7Jo+YXgae/HkPJCwPjAE0o9/ lMhSvev9094xq5e747WPtNp2Oh4qCOUENIzTfqr/KIr381ttlNaYkmlKnZlHzTX0+Bm738 xqza2VCN2rdRWHLBYdWHeqpjyS+ylHZqBgmcI01X6l0g0dUUhafOgNwjlQug8wx42/aoVp DFHxEggGylNZ+yxM+KxwzTKrmuxluVmqd3TbcVB74lTEVwDrFP/VPXHjY75+VA== From: Herve Codina To: Herve Codina , Li Yang , Rob Herring , Krzysztof Kozlowski , Liam Girdwood , Mark Brown , Christophe Leroy , Michael Ellerman , Nicholas Piggin , Qiang Zhao , Jaroslav Kysela , Takashi Iwai , Shengjiu Wang , Xiubo Li , Fabio Estevam , Nicolin Chen Subject: [PATCH v3 01/10] dt-bindings: soc: fsl: cpm_qe: Add TSA controller Date: Fri, 13 Jan 2023 11:37:50 +0100 Message-Id: <20230113103759.327698-2-herve.codina@bootlin.com> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20230113103759.327698-1-herve.codina@bootlin.com> References: <20230113103759.327698-1-herve.codina@bootlin.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, Thomas Petazzoni , linuxppc-dev@lists.ozlabs.org, linux-arm-kernel@lists.infradead.org Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" Add support for the time slot assigner (TSA) available in some PowerQUICC SoC such as MPC885 or MPC866. Signed-off-by: Herve Codina --- .../bindings/soc/fsl/cpm_qe/fsl,tsa.yaml | 260 ++++++++++++++++++ include/dt-bindings/soc/fsl,tsa.h | 13 + 2 files changed, 273 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml create mode 100644 include/dt-bindings/soc/fsl,tsa.h diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml new file mode 100644 index 000000000000..eb17b6119abd --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml @@ -0,0 +1,260 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,tsa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PowerQUICC CPM Time-slot assigner (TSA) controller + +maintainers: + - Herve Codina + +description: | + The TSA is the time-slot assigner that can be found on some + PowerQUICC SoC. + Its purpose is to route some TDM time-slots to other internal + serial controllers. + +properties: + compatible: + items: + - enum: + - fsl,mpc885-tsa + - fsl,mpc866-tsa + - const: fsl,cpm1-tsa + + reg: + items: + - description: SI (Serial Interface) register base + - description: SI RAM base + + reg-names: + items: + - const: si_regs + - const: si_ram + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^tdm@[0-1]$': + description: + The TDM managed by this controller + type: object + + properties: + reg: + minimum: 0 + maximum: 1 + description: + The TDM number for this TDM, 0 for TDMa and 1 for TDMb + + fsl,common-rxtx-pins: + $ref: /schemas/types.yaml#/definitions/flag + description: + The hardware can use four dedicated pins for Tx clock, + Tx sync, Rx clock and Rx sync or use only two pins, + Tx/Rx clock and Rx/Rx sync. + Without the 'fsl,common-rxtx-pins' property, the four + pins are used. With the 'fsl,common-rxtx-pins' property, + two pins are used. + + clocks: + minItems: 2 + maxItems: 4 + + clock-names: + minItems: 2 + maxItems: 4 + + fsl,mode: + $ref: /schemas/types.yaml#/definitions/string + enum: [normal, echo, internal-loopback, control-loopback] + default: normal + description: | + Operational mode: + - normal: + Normal operation + - echo: + Automatic echo. Rx data is resent on Tx + - internal-loopback: + The TDM transmitter is connected to the receiver. + Data appears on Tx pin. + - control-loopback: + The TDM transmitter is connected to the receiver. + The Tx pin is disconnected. + + fsl,rx-frame-sync-delay-bits: + enum: [0, 1, 2, 3] + default: 0 + description: | + Receive frame sync delay in number of bits. + Indicates the delay between the Rx sync and the first bit of the + Rx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. + + fsl,tx-frame-sync-delay-bits: + enum: [0, 1, 2, 3] + default: 0 + description: | + Transmit frame sync delay in number of bits. + Indicates the delay between the Tx sync and the first bit of the + Tx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. + + fsl,clock-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Data is sent on falling edge of the clock (and received on the + rising edge). + If 'clock-falling-edge' is not present, data is sent on the + rising edge (and received on the falling edge). + + fsl,fsync-rising-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Frame sync pulses are sampled with the rising edge of the channel + clock. If 'fsync-rising-edge' is not present, pulses are sample + with e falling edge. + + fsl,double-speed-clock: + $ref: /schemas/types.yaml#/definitions/flag + description: + The channel clock is twice the data rate. + + fsl,tx-ts-routes: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + A list of tupple that indicates the Tx time-slots routes. + tx_ts_routes = + < 2 0 >, /* The first 2 time slots are not used */ + < 3 1 >, /* The next 3 ones are route to SCC2 */ + < 4 0 >, /* The next 4 ones are not used */ + < 2 2 >; /* The nest 2 ones are route to SCC3 */ + items: + items: + - description: + The number of time-slots + minimum: 1 + maximum: 64 + - description: | + The source serial interface (dt-bindings/soc/fsl,tsa.h + defines these values) + - 0: No destination + - 1: SCC2 + - 2: SCC3 + - 3: SCC4 + - 4: SMC1 + - 5: SMC2 + enum: [0, 1, 2, 3, 4, 5] + minItems: 1 + maxItems: 64 + + fsl,rx-ts-routes: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + A list of tupple that indicates the Rx time-slots routes. + tx_ts_routes = + < 2 0 >, /* The first 2 time slots are not used */ + < 3 1 >, /* The next 3 ones are route from SCC2 */ + < 4 0 >, /* The next 4 ones are not used */ + < 2 2 >; /* The nest 2 ones are route from SCC3 */ + items: + items: + - description: + The number of time-slots + minimum: 1 + maximum: 64 + - description: | + The destination serial interface (dt-bindings/soc/fsl,tsa.h + defines these values) + - 0: No destination + - 1: SCC2 + - 2: SCC3 + - 3: SCC4 + - 4: SMC1 + - 5: SMC2 + enum: [0, 1, 2, 3, 4, 5] + minItems: 1 + maxItems: 64 + + allOf: + # If fsl,common-rxtx-pins is present, only 2 clocks are needed. + # Else, the 4 clocks must be present. + - if: + required: + - fsl,common-rxtx-pins + then: + properties: + clocks: + items: + - description: External clock connected to L1RSYNC pin + - description: External clock connected to L1RCLK pin + clock-names: + items: + - const: l1rsync + - const: l1rclk + else: + properties: + clocks: + items: + - description: External clock connected to L1RSYNC pin + - description: External clock connected to L1RCLK pin + - description: External clock connected to L1TSYNC pin + - description: External clock connected to L1TCLK pin + clock-names: + items: + - const: l1rsync + - const: l1rclk + - const: l1tsync + - const: l1tclk + + required: + - reg + - clocks + - clock-names + +required: + - compatible + - reg + - reg-names + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include + + tsa@ae0 { + compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa"; + reg = <0xae0 0x10>, + <0xc00 0x200>; + reg-names = "si_regs", "si_ram"; + + #address-cells = <1>; + #size-cells = <0>; + + tdm@0 { + /* TDMa */ + reg = <0>; + + clocks = <&clk_l1rsynca>, <&clk_l1rclka>; + clock-names = "l1rsync", "l1rclk"; + + fsl,common-rxtx-pins; + fsl,fsync-rising-edge; + + fsl,tx-ts-routes = < 2 0 >, /* TS 0..1 */ + < 24 FSL_CPM_TSA_SCC4 >, /* TS 2..25 */ + < 1 0 >, /* TS 26 */ + < 5 FSL_CPM_TSA_SCC3 >; /* TS 27..31 */ + + fsl,rx-ts-routes = < 2 0 >, /* TS 0..1 */ + < 24 FSL_CPM_TSA_SCC4 >, /* 2..25 */ + < 1 0 >, /* TS 26 */ + < 5 FSL_CPM_TSA_SCC3 >; /* TS 27..31 */ + }; + }; diff --git a/include/dt-bindings/soc/fsl,tsa.h b/include/dt-bindings/soc/fsl,tsa.h new file mode 100644 index 000000000000..2cc44e867dbe --- /dev/null +++ b/include/dt-bindings/soc/fsl,tsa.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ + +#ifndef __DT_BINDINGS_SOC_FSL_TSA_H +#define __DT_BINDINGS_SOC_FSL_TSA_H + +#define FSL_CPM_TSA_NU 0 /* Pseuso Cell Id for not used item */ +#define FSL_CPM_TSA_SCC2 1 +#define FSL_CPM_TSA_SCC3 2 +#define FSL_CPM_TSA_SCC4 3 +#define FSL_CPM_TSA_SMC1 4 +#define FSL_CPM_TSA_SMC2 5 + +#endif -- 2.38.1 From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id BB8FCC54EBE for ; Fri, 13 Jan 2023 10:39:27 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=0qxY1n2R2KIGDnNzEyEEhmXFrrF0DUVwgjt2xCg5MRo=; b=ZEtRfT6V1+IaG1 H5wXdFExPN0+C6T0t7WI24HEoGgfN8LTJNx3LN1dBD4NjnaWVX2KHGT7IZXKx2vlgT9WwGt04MQDz q7pFGUx83+3q17GtarfUhlZeOheItZ8buVdI3iNRV1v+DLgTocLYFE9spbJLPpft7IM1pLL5UWkqg 5I9yho+7CZadg/np/ikl2ddx4dyjpY4bXcUiExvTWWL4tSMbVwF7AHBWLEmnAiCbBLs7q6CUyXDwm SdHzs5NppbK40UYTFESgNQOkxGAj9zsu9sQ1dUxAdaSXQF9TxBvq6h1h+onbRspPLUNrvgom+hnKf huSwTZBNwSh8EqUup35Q==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1pGHS4-001nYi-7q; Fri, 13 Jan 2023 10:38:24 +0000 Received: from relay9-d.mail.gandi.net ([217.70.183.199]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1pGHRs-001nUs-Aw for linux-arm-kernel@lists.infradead.org; Fri, 13 Jan 2023 10:38:15 +0000 Received: (Authenticated sender: herve.codina@bootlin.com) by mail.gandi.net (Postfix) with ESMTPA id 36677FF812; Fri, 13 Jan 2023 10:38:06 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1673606289; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=e9+cZzguFSROPV4tCZLD7SaeW4MY38Tng5UQywdd1Oo=; b=jS1gu5zvJRx9adaZfWf64nRyetSxBLADYSnm1YSic+J+cl+2Vz+aILzoDS+QEqraJBobg1 O9jX1WxQrV4+Gc33rnj2RNubSIAyKoKK+7EKRXFizUBWWb7Jo+YXgae/HkPJCwPjAE0o9/ lMhSvev9094xq5e747WPtNp2Oh4qCOUENIzTfqr/KIr381ttlNaYkmlKnZlHzTX0+Bm738 xqza2VCN2rdRWHLBYdWHeqpjyS+ylHZqBgmcI01X6l0g0dUUhafOgNwjlQug8wx42/aoVp DFHxEggGylNZ+yxM+KxwzTKrmuxluVmqd3TbcVB74lTEVwDrFP/VPXHjY75+VA== From: Herve Codina To: Herve Codina , Li Yang , Rob Herring , Krzysztof Kozlowski , Liam Girdwood , Mark Brown , Christophe Leroy , Michael Ellerman , Nicholas Piggin , Qiang Zhao , Jaroslav Kysela , Takashi Iwai , Shengjiu Wang , Xiubo Li , Fabio Estevam , Nicolin Chen Cc: linuxppc-dev@lists.ozlabs.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org, Thomas Petazzoni Subject: [PATCH v3 01/10] dt-bindings: soc: fsl: cpm_qe: Add TSA controller Date: Fri, 13 Jan 2023 11:37:50 +0100 Message-Id: <20230113103759.327698-2-herve.codina@bootlin.com> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20230113103759.327698-1-herve.codina@bootlin.com> References: <20230113103759.327698-1-herve.codina@bootlin.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230113_023812_836597_A60DC469 X-CRM114-Status: GOOD ( 20.73 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Add support for the time slot assigner (TSA) available in some PowerQUICC SoC such as MPC885 or MPC866. Signed-off-by: Herve Codina --- .../bindings/soc/fsl/cpm_qe/fsl,tsa.yaml | 260 ++++++++++++++++++ include/dt-bindings/soc/fsl,tsa.h | 13 + 2 files changed, 273 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml create mode 100644 include/dt-bindings/soc/fsl,tsa.h diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml new file mode 100644 index 000000000000..eb17b6119abd --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,tsa.yaml @@ -0,0 +1,260 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,tsa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PowerQUICC CPM Time-slot assigner (TSA) controller + +maintainers: + - Herve Codina + +description: | + The TSA is the time-slot assigner that can be found on some + PowerQUICC SoC. + Its purpose is to route some TDM time-slots to other internal + serial controllers. + +properties: + compatible: + items: + - enum: + - fsl,mpc885-tsa + - fsl,mpc866-tsa + - const: fsl,cpm1-tsa + + reg: + items: + - description: SI (Serial Interface) register base + - description: SI RAM base + + reg-names: + items: + - const: si_regs + - const: si_ram + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^tdm@[0-1]$': + description: + The TDM managed by this controller + type: object + + properties: + reg: + minimum: 0 + maximum: 1 + description: + The TDM number for this TDM, 0 for TDMa and 1 for TDMb + + fsl,common-rxtx-pins: + $ref: /schemas/types.yaml#/definitions/flag + description: + The hardware can use four dedicated pins for Tx clock, + Tx sync, Rx clock and Rx sync or use only two pins, + Tx/Rx clock and Rx/Rx sync. + Without the 'fsl,common-rxtx-pins' property, the four + pins are used. With the 'fsl,common-rxtx-pins' property, + two pins are used. + + clocks: + minItems: 2 + maxItems: 4 + + clock-names: + minItems: 2 + maxItems: 4 + + fsl,mode: + $ref: /schemas/types.yaml#/definitions/string + enum: [normal, echo, internal-loopback, control-loopback] + default: normal + description: | + Operational mode: + - normal: + Normal operation + - echo: + Automatic echo. Rx data is resent on Tx + - internal-loopback: + The TDM transmitter is connected to the receiver. + Data appears on Tx pin. + - control-loopback: + The TDM transmitter is connected to the receiver. + The Tx pin is disconnected. + + fsl,rx-frame-sync-delay-bits: + enum: [0, 1, 2, 3] + default: 0 + description: | + Receive frame sync delay in number of bits. + Indicates the delay between the Rx sync and the first bit of the + Rx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. + + fsl,tx-frame-sync-delay-bits: + enum: [0, 1, 2, 3] + default: 0 + description: | + Transmit frame sync delay in number of bits. + Indicates the delay between the Tx sync and the first bit of the + Tx frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. + + fsl,clock-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Data is sent on falling edge of the clock (and received on the + rising edge). + If 'clock-falling-edge' is not present, data is sent on the + rising edge (and received on the falling edge). + + fsl,fsync-rising-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Frame sync pulses are sampled with the rising edge of the channel + clock. If 'fsync-rising-edge' is not present, pulses are sample + with e falling edge. + + fsl,double-speed-clock: + $ref: /schemas/types.yaml#/definitions/flag + description: + The channel clock is twice the data rate. + + fsl,tx-ts-routes: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + A list of tupple that indicates the Tx time-slots routes. + tx_ts_routes = + < 2 0 >, /* The first 2 time slots are not used */ + < 3 1 >, /* The next 3 ones are route to SCC2 */ + < 4 0 >, /* The next 4 ones are not used */ + < 2 2 >; /* The nest 2 ones are route to SCC3 */ + items: + items: + - description: + The number of time-slots + minimum: 1 + maximum: 64 + - description: | + The source serial interface (dt-bindings/soc/fsl,tsa.h + defines these values) + - 0: No destination + - 1: SCC2 + - 2: SCC3 + - 3: SCC4 + - 4: SMC1 + - 5: SMC2 + enum: [0, 1, 2, 3, 4, 5] + minItems: 1 + maxItems: 64 + + fsl,rx-ts-routes: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + A list of tupple that indicates the Rx time-slots routes. + tx_ts_routes = + < 2 0 >, /* The first 2 time slots are not used */ + < 3 1 >, /* The next 3 ones are route from SCC2 */ + < 4 0 >, /* The next 4 ones are not used */ + < 2 2 >; /* The nest 2 ones are route from SCC3 */ + items: + items: + - description: + The number of time-slots + minimum: 1 + maximum: 64 + - description: | + The destination serial interface (dt-bindings/soc/fsl,tsa.h + defines these values) + - 0: No destination + - 1: SCC2 + - 2: SCC3 + - 3: SCC4 + - 4: SMC1 + - 5: SMC2 + enum: [0, 1, 2, 3, 4, 5] + minItems: 1 + maxItems: 64 + + allOf: + # If fsl,common-rxtx-pins is present, only 2 clocks are needed. + # Else, the 4 clocks must be present. + - if: + required: + - fsl,common-rxtx-pins + then: + properties: + clocks: + items: + - description: External clock connected to L1RSYNC pin + - description: External clock connected to L1RCLK pin + clock-names: + items: + - const: l1rsync + - const: l1rclk + else: + properties: + clocks: + items: + - description: External clock connected to L1RSYNC pin + - description: External clock connected to L1RCLK pin + - description: External clock connected to L1TSYNC pin + - description: External clock connected to L1TCLK pin + clock-names: + items: + - const: l1rsync + - const: l1rclk + - const: l1tsync + - const: l1tclk + + required: + - reg + - clocks + - clock-names + +required: + - compatible + - reg + - reg-names + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include + + tsa@ae0 { + compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa"; + reg = <0xae0 0x10>, + <0xc00 0x200>; + reg-names = "si_regs", "si_ram"; + + #address-cells = <1>; + #size-cells = <0>; + + tdm@0 { + /* TDMa */ + reg = <0>; + + clocks = <&clk_l1rsynca>, <&clk_l1rclka>; + clock-names = "l1rsync", "l1rclk"; + + fsl,common-rxtx-pins; + fsl,fsync-rising-edge; + + fsl,tx-ts-routes = < 2 0 >, /* TS 0..1 */ + < 24 FSL_CPM_TSA_SCC4 >, /* TS 2..25 */ + < 1 0 >, /* TS 26 */ + < 5 FSL_CPM_TSA_SCC3 >; /* TS 27..31 */ + + fsl,rx-ts-routes = < 2 0 >, /* TS 0..1 */ + < 24 FSL_CPM_TSA_SCC4 >, /* 2..25 */ + < 1 0 >, /* TS 26 */ + < 5 FSL_CPM_TSA_SCC3 >; /* TS 27..31 */ + }; + }; diff --git a/include/dt-bindings/soc/fsl,tsa.h b/include/dt-bindings/soc/fsl,tsa.h new file mode 100644 index 000000000000..2cc44e867dbe --- /dev/null +++ b/include/dt-bindings/soc/fsl,tsa.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ + +#ifndef __DT_BINDINGS_SOC_FSL_TSA_H +#define __DT_BINDINGS_SOC_FSL_TSA_H + +#define FSL_CPM_TSA_NU 0 /* Pseuso Cell Id for not used item */ +#define FSL_CPM_TSA_SCC2 1 +#define FSL_CPM_TSA_SCC3 2 +#define FSL_CPM_TSA_SCC4 3 +#define FSL_CPM_TSA_SMC1 4 +#define FSL_CPM_TSA_SMC2 5 + +#endif -- 2.38.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel