All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: linux-arm-kernel@lists.infradead.org
Cc: Marek Vasut <marex@denx.de>,
	Alexander Stein <alexander.stein@ew.tq-group.com>,
	Fabio Estevam <festevam@denx.de>, Peng Fan <peng.fan@nxp.com>,
	Richard Zhu <hongxing.zhu@nxp.com>,
	Shawn Guo <shawnguo@kernel.org>,
	NXP Linux Team <linux-imx@nxp.com>
Subject: [PATCH v3 2/2] arm64: dts: imx8mq: Deduplicate PCIe clock-names property
Date: Mon, 16 Jan 2023 11:14:22 +0100	[thread overview]
Message-ID: <20230116101422.46257-2-marex@denx.de> (raw)
In-Reply-To: <20230116101422.46257-1-marex@denx.de>

Move the PCIe clock-names property from various DTs into SoC dtsi to
reduce duplication. In case of a couple of boards, reorder the clock
so they match the order in yaml DT bindings.

Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mq.dtsi, imx8mq-tqma8mq-mba8mx.dts
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org
---
V2: - Add RB from Alex
    - Add default pcie clock entry into dtsi
    - Fix the Ultra board
V3: Rebase on latest next-20230116
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts           | 10 ++++------
 .../boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts   | 10 ++++------
 arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts   |  5 ++---
 .../arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts | 10 ++++------
 arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi    | 10 ++++------
 arch/arm64/boot/dts/freescale/imx8mq.dtsi              | 10 ++++++++++
 6 files changed, 28 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 78937910f4039..7507548cdb16b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -356,10 +356,9 @@ &pcie0 {
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
-		 <&clk IMX8MQ_CLK_PCIE1_AUX>,
+		 <&pcie0_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
 	vph-supply = <&vgen5_reg>;
 	status = "okay";
 };
@@ -369,10 +368,9 @@ &pcie1 {
 	pinctrl-0 = <&pinctrl_pcie1>;
 	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
-		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
+		 <&pcie0_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
 	vpcie-supply = <&reg_pcie1>;
 	vph-supply = <&vgen5_reg>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
index a91c136797f60..6376417e918c2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
@@ -245,20 +245,18 @@ &pcie0 {
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
-		 <&clk IMX8MQ_CLK_PCIE1_AUX>,
+		 <&pcie0_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
 	status = "okay";
 };
 
 /* Intel Ethernet Controller I210/I211 */
 &pcie1 {
 	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
-		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
+		 <&pcie1_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
-		 <&pcie1_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
 	fsl,max-link-speed = <1>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
index 055031bba8c4b..200268660518d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
@@ -197,10 +197,9 @@ &pcie1 {
 	pinctrl-0 = <&pinctrl_pcie1>;
 	reset-gpio = <&gpio3 23 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
-		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
+		 <&pcie1_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
-		 <&pcie1_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
index d7660eab68b94..344cfdaeb1d59 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
@@ -105,10 +105,9 @@ &led2 {
 &pcie0 {
 	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
-		 <&clk IMX8MQ_CLK_PCIE1_AUX>,
+		 <&pcie0_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
-		 <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
 	epdev_on-supply = <&reg_vcc_3v3>;
 	hard-wired = <1>;
 	status = "okay";
@@ -120,10 +119,9 @@ &pcie0 {
  */
 &pcie1 {
 	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
-		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
+		 <&pcie1_refclk>,
 		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
-		 <&pcie1_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
 	epdev_on-supply = <&reg_vcc_3v3>;
 	hard-wired = <1>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 4e05120c62d41..74a7a589a3296 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -551,10 +551,9 @@ &pcie0 {
 	pinctrl-0 = <&pinctrl_pcie0>;
 	reset-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
-	         <&clk IMX8MQ_CLK_PCIE1_AUX>,
+	         <&pcie0_refclk>,
 	         <&clk IMX8MQ_CLK_PCIE1_PHY>,
-	         <&pcie0_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+	         <&clk IMX8MQ_CLK_PCIE1_AUX>;
 	vph-supply = <&vgen5_reg>;
 	status = "okay";
 };
@@ -564,10 +563,9 @@ &pcie1 {
 	pinctrl-0 = <&pinctrl_pcie1>;
 	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
-	         <&clk IMX8MQ_CLK_PCIE2_AUX>,
+	         <&pcie1_refclk>,
 	         <&clk IMX8MQ_CLK_PCIE2_PHY>,
-	         <&pcie1_refclk>;
-	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+	         <&clk IMX8MQ_CLK_PCIE2_AUX>;
 	vph-supply = <&vgen5_reg>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index faed28e3ffa17..98fbba4c99a99 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1542,6 +1542,11 @@ pcie0: pcie@33800000 {
 			                <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,max-link-speed = <2>;
 			linux,pci-domain = <0>;
+			clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE1_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
 			power-domains = <&pgc_pcie>;
 			resets = <&src IMX8MQ_RESET_PCIEPHY>,
 			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
@@ -1579,6 +1584,11 @@ pcie1: pcie@33c00000 {
 					<0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,max-link-speed = <2>;
 			linux,pci-domain = <1>;
+			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
 			power-domains = <&pgc_pcie>;
 			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
 			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
-- 
2.39.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2023-01-16 10:15 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-16 10:14 [PATCH v3 1/2] arm64: dts: imx8mm: Deduplicate PCIe clock-names property Marek Vasut
2023-01-16 10:14 ` Marek Vasut [this message]
2023-01-17  4:00   ` [PATCH v3 2/2] arm64: dts: imx8mq: " Hongxing Zhu
2023-01-17 12:31     ` Marek Vasut
2023-01-18  1:48       ` Hongxing Zhu
2023-01-17  3:35 ` [PATCH v3 1/2] arm64: dts: imx8mm: " Hongxing Zhu
2023-01-26  6:50 ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230116101422.46257-2-marex@denx.de \
    --to=marex@denx.de \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=festevam@denx.de \
    --cc=hongxing.zhu@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=peng.fan@nxp.com \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.