All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-media@vger.kernel.org
Cc: Sakari Ailus <sakari.ailus@iki.fi>,
	Manivannan Sadhasivam <mani@kernel.org>,
	Alexander Stein <alexander.stein@ew.tq-group.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH v3 12/17] media: i2c: imx290: Rename, extend and expand usage of imx290_pixfmt
Date: Mon, 16 Jan 2023 16:44:49 +0200	[thread overview]
Message-ID: <20230116144454.1012-13-laurent.pinchart@ideasonboard.com> (raw)
In-Reply-To: <20230116144454.1012-1-laurent.pinchart@ideasonboard.com>

The imx290_pixfmt structure contains information about formats,
currently limited to the bpp value. Extend it with the register settings
for each format, and rename it to imx290_format_info to make its purpose
clearer. Add a function named imx290_format_info() to look up format
info for a media bus code, and use it through the code. This allows
dropping the imx290 bpp field as the value is now looked up dynamically.

The error handling in imx290_setup_format() can also be dropped, as the
format is guaranteed by imx290_set_fmt() to be valid.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes since v2:

- Pass format to imx290_ctrl_update()
---
 drivers/media/i2c/imx290.c | 94 +++++++++++++++++++++-----------------
 1 file changed, 53 insertions(+), 41 deletions(-)

diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index 74b9a7110709..7356279822e8 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -182,7 +182,6 @@ struct imx290 {
 	struct media_pad pad;
 
 	const struct imx290_mode *current_mode;
-	u8 bpp;
 
 	struct regulator_bulk_data supplies[IMX290_NUM_SUPPLIES];
 	struct gpio_desc *rst_gpio;
@@ -414,16 +413,41 @@ static inline int imx290_modes_num(const struct imx290 *imx290)
 		return ARRAY_SIZE(imx290_modes_4lanes);
 }
 
-struct imx290_pixfmt {
+struct imx290_format_info {
 	u32 code;
 	u8 bpp;
+	const struct imx290_regval *regs;
+	unsigned int num_regs;
 };
 
-static const struct imx290_pixfmt imx290_formats[] = {
-	{ MEDIA_BUS_FMT_SRGGB10_1X10, 10 },
-	{ MEDIA_BUS_FMT_SRGGB12_1X12, 12 },
+static const struct imx290_format_info imx290_formats[] = {
+	{
+		.code = MEDIA_BUS_FMT_SRGGB10_1X10,
+		.bpp = 10,
+		.regs = imx290_10bit_settings,
+		.num_regs = ARRAY_SIZE(imx290_10bit_settings),
+	}, {
+		.code = MEDIA_BUS_FMT_SRGGB12_1X12,
+		.bpp = 12,
+		.regs = imx290_12bit_settings,
+		.num_regs = ARRAY_SIZE(imx290_12bit_settings),
+	}
 };
 
+static const struct imx290_format_info *imx290_format_info(u32 code)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(imx290_formats); ++i) {
+		const struct imx290_format_info *info = &imx290_formats[i];
+
+		if (info->code == code)
+			return info;
+	}
+
+	return NULL;
+}
+
 /* -----------------------------------------------------------------------------
  * Register access
  */
@@ -516,40 +540,31 @@ static int imx290_set_data_lanes(struct imx290 *imx290)
 }
 
 static int imx290_set_black_level(struct imx290 *imx290,
+				  const struct v4l2_mbus_framefmt *format,
 				  unsigned int black_level, int *err)
 {
+	unsigned int bpp = imx290_format_info(format->code)->bpp;
+
 	return imx290_write(imx290, IMX290_BLKLEVEL,
-			    black_level >> (16 - imx290->bpp), err);
+			    black_level >> (16 - bpp), err);
 }
 
 static int imx290_setup_format(struct imx290 *imx290,
 			       const struct v4l2_mbus_framefmt *format)
 {
-	const struct imx290_regval *regs;
-	unsigned int num_regs;
+	const struct imx290_format_info *info;
 	int ret;
 
-	switch (format->code) {
-	case MEDIA_BUS_FMT_SRGGB10_1X10:
-		regs = imx290_10bit_settings;
-		num_regs = ARRAY_SIZE(imx290_10bit_settings);
-		break;
-	case MEDIA_BUS_FMT_SRGGB12_1X12:
-		regs = imx290_12bit_settings;
-		num_regs = ARRAY_SIZE(imx290_12bit_settings);
-		break;
-	default:
-		dev_err(imx290->dev, "Unknown pixel format\n");
-		return -EINVAL;
-	}
+	info = imx290_format_info(format->code);
 
-	ret = imx290_set_register_array(imx290, regs, num_regs);
+	ret = imx290_set_register_array(imx290, info->regs, info->num_regs);
 	if (ret < 0) {
 		dev_err(imx290->dev, "Could not set format registers\n");
 		return ret;
 	}
 
-	return imx290_set_black_level(imx290, IMX290_BLACK_LEVEL_DEFAULT, &ret);
+	return imx290_set_black_level(imx290, format,
+				      IMX290_BLACK_LEVEL_DEFAULT, &ret);
 }
 
 /* ----------------------------------------------------------------------------
@@ -592,7 +607,7 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
 
 	case V4L2_CID_TEST_PATTERN:
 		if (ctrl->val) {
-			imx290_set_black_level(imx290, 0, &ret);
+			imx290_set_black_level(imx290, format, 0, &ret);
 			usleep_range(10000, 11000);
 			imx290_write(imx290, IMX290_PGCTRL,
 				     (u8)(IMX290_PGCTRL_REGEN |
@@ -601,8 +616,8 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
 		} else {
 			imx290_write(imx290, IMX290_PGCTRL, 0x00, &ret);
 			usleep_range(10000, 11000);
-			imx290_set_black_level(imx290, IMX290_BLACK_LEVEL_DEFAULT,
-					       &ret);
+			imx290_set_black_level(imx290, format,
+					       IMX290_BLACK_LEVEL_DEFAULT, &ret);
 		}
 		break;
 
@@ -632,6 +647,7 @@ static const char * const imx290_test_pattern_menu[] = {
 };
 
 static void imx290_ctrl_update(struct imx290 *imx290,
+			       const struct v4l2_mbus_framefmt *format,
 			       const struct imx290_mode *mode)
 {
 	unsigned int hblank = mode->hmax - mode->width;
@@ -641,7 +657,7 @@ static void imx290_ctrl_update(struct imx290 *imx290,
 
 	/* pixel rate = link_freq * 2 * nr_of_lanes / bits_per_sample */
 	pixel_rate = link_freq * 2 * imx290->nlanes;
-	do_div(pixel_rate, imx290->bpp);
+	do_div(pixel_rate, imx290_format_info(format->code)->bpp);
 
 	__v4l2_ctrl_s_ctrl(imx290->link_freq, mode->link_freq_index);
 	__v4l2_ctrl_s_ctrl_int64(imx290->pixel_rate, pixel_rate);
@@ -843,8 +859,7 @@ static int imx290_enum_frame_size(struct v4l2_subdev *sd,
 	const struct imx290 *imx290 = to_imx290(sd);
 	const struct imx290_mode *imx290_modes = imx290_modes_ptr(imx290);
 
-	if ((fse->code != imx290_formats[0].code) &&
-	    (fse->code != imx290_formats[1].code))
+	if (!imx290_format_info(fse->code))
 		return -EINVAL;
 
 	if (fse->index >= imx290_modes_num(imx290))
@@ -865,7 +880,6 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
 	struct imx290 *imx290 = to_imx290(sd);
 	const struct imx290_mode *mode;
 	struct v4l2_mbus_framefmt *format;
-	unsigned int i;
 
 	mode = v4l2_find_nearest_size(imx290_modes_ptr(imx290),
 				      imx290_modes_num(imx290), width, height,
@@ -874,23 +888,17 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
 	fmt->format.width = mode->width;
 	fmt->format.height = mode->height;
 
-	for (i = 0; i < ARRAY_SIZE(imx290_formats); i++)
-		if (imx290_formats[i].code == fmt->format.code)
-			break;
+	if (!imx290_format_info(fmt->format.code))
+		fmt->format.code = imx290_formats[0].code;
 
-	if (i >= ARRAY_SIZE(imx290_formats))
-		i = 0;
-
-	fmt->format.code = imx290_formats[i].code;
 	fmt->format.field = V4L2_FIELD_NONE;
 
 	format = v4l2_subdev_get_pad_format(sd, sd_state, 0);
 
 	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
 		imx290->current_mode = mode;
-		imx290->bpp = imx290_formats[i].bpp;
 
-		imx290_ctrl_update(imx290, mode);
+		imx290_ctrl_update(imx290, &fmt->format, mode);
 	}
 
 	*format = fmt->format;
@@ -981,10 +989,11 @@ static const struct media_entity_operations imx290_subdev_entity_ops = {
 static int imx290_subdev_init(struct imx290 *imx290)
 {
 	struct i2c_client *client = to_i2c_client(imx290->dev);
+	const struct v4l2_mbus_framefmt *format;
+	struct v4l2_subdev_state *state;
 	int ret;
 
 	imx290->current_mode = &imx290_modes_ptr(imx290)[0];
-	imx290->bpp = imx290_formats[0].bpp;
 
 	v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops);
 	imx290->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
@@ -1013,7 +1022,10 @@ static int imx290_subdev_init(struct imx290 *imx290)
 		goto err_ctrls;
 	}
 
-	imx290_ctrl_update(imx290, imx290->current_mode);
+	state = v4l2_subdev_lock_and_get_active_state(&imx290->sd);
+	format = v4l2_subdev_get_pad_format(&imx290->sd, state, 0);
+	imx290_ctrl_update(imx290, format, imx290->current_mode);
+	v4l2_subdev_unlock_state(state);
 
 	return 0;
 
-- 
Regards,

Laurent Pinchart


  parent reply	other threads:[~2023-01-16 14:56 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-16 14:44 [PATCH v3 00/17] media: i2c: imx290: Miscellaneous improvements Laurent Pinchart
2023-01-16 14:44 ` [PATCH v3 01/17] media: i2c: imx290: Group functions in sections Laurent Pinchart
2023-01-16 14:44 ` [PATCH v3 02/17] media: i2c: imx290: Factor out subdev init and cleanup to functions Laurent Pinchart
2023-01-16 14:44 ` [PATCH v3 03/17] media: i2c: imx290: Factor out control update code to a function Laurent Pinchart
2023-01-16 14:44 ` [PATCH v3 04/17] media: i2c: imx290: Access link_freq_index directly Laurent Pinchart
2023-01-16 14:44 ` [PATCH v3 05/17] media: i2c: imx290: Pass format and mode to imx290_calc_pixel_rate() Laurent Pinchart
2023-01-16 15:00   ` Alexander Stein
2023-01-16 14:44 ` [PATCH v3 06/17] media: i2c: imx290: Compute pixel rate and blanking in one place Laurent Pinchart
2023-01-16 14:44 ` [PATCH v3 07/17] media: i2c: imx290: Factor out black level setting to a function Laurent Pinchart
2023-01-16 14:44 ` [PATCH v3 08/17] media: i2c: imx290: Factor out DT parsing to separate function Laurent Pinchart
2023-01-16 14:44 ` [PATCH v3 09/17] media: i2c: imx290: Use dev_err_probe() Laurent Pinchart
2023-01-16 14:44 ` [PATCH v3 10/17] media: i2c: imx290: Factor out clock initialization to separate function Laurent Pinchart
2023-01-16 14:44 ` [PATCH v3 11/17] media: i2c: imx290: Use V4L2 subdev active state Laurent Pinchart
2023-01-16 15:05   ` Alexander Stein
2023-01-16 14:44 ` Laurent Pinchart [this message]
2023-01-16 14:44 ` [PATCH v3 13/17] media: i2c: imx290: Use runtime PM autosuspend Laurent Pinchart
2023-01-16 14:44 ` [PATCH v3 14/17] media: i2c: imx290: Initialize runtime PM before subdev Laurent Pinchart
2023-02-27 17:52   ` Guenter Roeck
2023-02-28  9:56     ` Linux regression tracking #update (Thorsten Leemhuis)
2023-03-20 10:50       ` Linux regression tracking #adding (Thorsten Leemhuis)
2023-04-02 14:21         ` Thorsten Leemhuis
2023-03-12 13:10     ` Linux regression tracking (Thorsten Leemhuis)
2023-03-12 13:34       ` Laurent Pinchart
2023-03-12 13:59         ` Linux regression tracking (Thorsten Leemhuis)
2023-01-16 14:44 ` [PATCH v3 15/17] media: i2c: imx290: Configure data lanes at start time Laurent Pinchart
2023-01-16 14:44 ` [PATCH v3 16/17] media: i2c: imx290: Simplify imx290_set_data_lanes() Laurent Pinchart
2023-01-16 14:44 ` [PATCH v3 17/17] media: i2c: imx290: Handle error from imx290_set_data_lanes() Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230116144454.1012-13-laurent.pinchart@ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mani@kernel.org \
    --cc=sakari.ailus@iki.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.