All of lore.kernel.org
 help / color / mirror / Atom feed
From: Abel Vesa <abel.vesa@linaro.org>
To: "Andy Gross" <agross@kernel.org>,
	"Bjorn Andersson" <andersson@kernel.org>,
	"Konrad Dybcio" <konrad.dybcio@linaro.org>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"vkoul@kernel.org" <vkoul@kernel.org>,
	"Kishon Vijay Abraham I" <kishon@kernel.org>,
	"Manivannan Sadhasivam" <mani@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v4 12/12] arm64: dts: qcom: sm8550-mtp: Add PCIe PHYs and controllers nodes
Date: Thu, 19 Jan 2023 16:04:53 +0200	[thread overview]
Message-ID: <20230119140453.3942340-13-abel.vesa@linaro.org> (raw)
In-Reply-To: <20230119140453.3942340-1-abel.vesa@linaro.org>

Enable PCIe controllers and PHYs nodes on SM8550 MTP board.

Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---

This patch does not have a v3, but since it is now part of the same
patchset with the controller and the phy drivers patches, I had to
bump the version to 4.

Latest version was here (v2):
https://lore.kernel.org/all/20230118230526.1499328-3-abel.vesa@linaro.org/

Changes since latest version (v2):
 * none

Changes since v1:
 * ordered pcie related nodes alphabetically in MTP dts
 * dropped the pipe_mux, phy_pipe and ref clocks from the pcie nodes
 * dropped the child node from the phy nodes, like Johan suggested,
   and updated to use the sc8280xp binding scheme
 * changed "pcie_1_nocsr_com_phy_reset" 2nd reset name of pcie1_phy
   to "nocsr"
 * reordered all pcie nodes properties to look similar to the ones
   from sc8280xp



 arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 29 +++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 81fcbdc6bdc4..b69ded9c4b57 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -359,6 +359,35 @@ vreg_l3g_1p2: ldo3 {
 	};
 };
 
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	status = "okay";
+};
+
+&pcie1 {
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3c_0p91>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	vdda-qref-supply = <&vreg_l1e_0p88>;
+	status = "okay";
+};
+
 &pm8550_gpios {
 	sdc2_card_det_n: sdc2-card-det-state {
 		pins = "gpio12";
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

WARNING: multiple messages have this Message-ID (diff)
From: Abel Vesa <abel.vesa@linaro.org>
To: "Andy Gross" <agross@kernel.org>,
	"Bjorn Andersson" <andersson@kernel.org>,
	"Konrad Dybcio" <konrad.dybcio@linaro.org>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"vkoul@kernel.org" <vkoul@kernel.org>,
	"Kishon Vijay Abraham I" <kishon@kernel.org>,
	"Manivannan Sadhasivam" <mani@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v4 12/12] arm64: dts: qcom: sm8550-mtp: Add PCIe PHYs and controllers nodes
Date: Thu, 19 Jan 2023 16:04:53 +0200	[thread overview]
Message-ID: <20230119140453.3942340-13-abel.vesa@linaro.org> (raw)
In-Reply-To: <20230119140453.3942340-1-abel.vesa@linaro.org>

Enable PCIe controllers and PHYs nodes on SM8550 MTP board.

Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---

This patch does not have a v3, but since it is now part of the same
patchset with the controller and the phy drivers patches, I had to
bump the version to 4.

Latest version was here (v2):
https://lore.kernel.org/all/20230118230526.1499328-3-abel.vesa@linaro.org/

Changes since latest version (v2):
 * none

Changes since v1:
 * ordered pcie related nodes alphabetically in MTP dts
 * dropped the pipe_mux, phy_pipe and ref clocks from the pcie nodes
 * dropped the child node from the phy nodes, like Johan suggested,
   and updated to use the sc8280xp binding scheme
 * changed "pcie_1_nocsr_com_phy_reset" 2nd reset name of pcie1_phy
   to "nocsr"
 * reordered all pcie nodes properties to look similar to the ones
   from sc8280xp



 arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 29 +++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 81fcbdc6bdc4..b69ded9c4b57 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -359,6 +359,35 @@ vreg_l3g_1p2: ldo3 {
 	};
 };
 
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	status = "okay";
+};
+
+&pcie1 {
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3c_0p91>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	vdda-qref-supply = <&vreg_l1e_0p88>;
+	status = "okay";
+};
+
 &pm8550_gpios {
 	sdc2_card_det_n: sdc2-card-det-state {
 		pins = "gpio12";
-- 
2.34.1


  parent reply	other threads:[~2023-01-19 14:05 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-19 14:04 [PATCH v4 00/12] sm8550: Add PCIe HC and PHY support Abel Vesa
2023-01-19 14:04 ` Abel Vesa
2023-01-19 14:04 ` [PATCH v4 01/12] dt-bindings: phy: Add QMP PCIe PHY comptible for SM8550 Abel Vesa
2023-01-19 14:04   ` Abel Vesa
2023-01-22 14:09   ` Krzysztof Kozlowski
2023-01-22 14:09     ` Krzysztof Kozlowski
2023-01-19 14:04 ` [PATCH v4 02/12] phy: qcom-qmp: pcs: Add v6 register offsets Abel Vesa
2023-01-19 14:04   ` Abel Vesa
2023-01-19 14:04 ` [PATCH v4 03/12] phy: qcom-qmp: pcs: Add v6.20 " Abel Vesa
2023-01-19 14:04   ` Abel Vesa
2023-01-19 14:04 ` [PATCH v4 04/12] phy: qcom-qmp: pcs-pcie: Add v6 " Abel Vesa
2023-01-19 14:04   ` Abel Vesa
2023-01-19 14:04 ` [PATCH v4 05/12] phy: qcom-qmp: pcs-pcie: Add v6.20 " Abel Vesa
2023-01-19 14:04   ` Abel Vesa
2023-01-19 14:04 ` [PATCH v4 06/12] phy: qcom-qmp: qserdes-txrx: " Abel Vesa
2023-01-19 14:04   ` Abel Vesa
2023-01-19 14:04 ` [PATCH v4 07/12] phy: qcom-qmp: qserdes-lane-shared: Add v6 " Abel Vesa
2023-01-19 14:04   ` Abel Vesa
2023-01-19 14:04 ` [PATCH v4 08/12] phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs Abel Vesa
2023-01-19 14:04   ` Abel Vesa
2023-01-23 15:03   ` Johan Hovold
2023-01-23 15:03     ` Johan Hovold
2023-01-23 19:42     ` Abel Vesa
2023-01-23 19:42       ` Abel Vesa
2023-01-19 14:04 ` [PATCH v4 09/12] dt-bindings: PCI: qcom: Add SM8550 compatible Abel Vesa
2023-01-19 14:04   ` Abel Vesa
2023-01-22 14:10   ` Krzysztof Kozlowski
2023-01-22 14:10     ` Krzysztof Kozlowski
2023-01-23 10:44     ` Abel Vesa
2023-01-23 10:44       ` Abel Vesa
2023-01-23 11:03       ` Krzysztof Kozlowski
2023-01-23 11:03         ` Krzysztof Kozlowski
2023-01-19 14:04 ` [PATCH v4 10/12] PCI: qcom: Add SM8550 PCIe support Abel Vesa
2023-01-19 14:04   ` Abel Vesa
2023-01-19 14:21   ` Manivannan Sadhasivam
2023-01-19 14:21     ` Manivannan Sadhasivam
2023-01-19 15:35     ` Abel Vesa
2023-01-19 15:35       ` Abel Vesa
2023-01-23  8:27       ` Johan Hovold
2023-01-23  8:27         ` Johan Hovold
2023-01-19 14:04 ` [PATCH v4 11/12] arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes Abel Vesa
2023-01-19 14:04   ` Abel Vesa
2023-01-23  8:51   ` Johan Hovold
2023-01-23  8:51     ` Johan Hovold
2023-01-23 12:39     ` Abel Vesa
2023-01-23 12:39       ` Abel Vesa
2023-01-23 13:11       ` Abel Vesa
2023-01-23 13:11         ` Abel Vesa
2023-01-23 14:17         ` Johan Hovold
2023-01-23 14:17           ` Johan Hovold
2023-01-23 14:16       ` Johan Hovold
2023-01-23 14:16         ` Johan Hovold
2023-01-23 14:24         ` Johan Hovold
2023-01-23 14:24           ` Johan Hovold
2023-01-19 14:04 ` Abel Vesa [this message]
2023-01-19 14:04   ` [PATCH v4 12/12] arm64: dts: qcom: sm8550-mtp: " Abel Vesa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230119140453.3942340-13-abel.vesa@linaro.org \
    --to=abel.vesa@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kw@linux.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=lpieralisi@kernel.org \
    --cc=mani@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.