From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, "Duke Xin " <duke_xinanwen@163.com>,
"Johan Hovold" <johan@kernel.org>
Subject: [PATCH 4.14 13/25] USB: serial: option: add Quectel EM05CN (SG) modem
Date: Sun, 22 Jan 2023 16:04:13 +0100 [thread overview]
Message-ID: <20230122150218.384423882@linuxfoundation.org> (raw)
In-Reply-To: <20230122150217.788215473@linuxfoundation.org>
From: Duke Xin(辛安文) <duke_xinanwen@163.com>
commit 1541dd0097c0f8f470e76eddf5120fc55a7e3101 upstream.
The EM05CN (SG) modem has 2 USB configurations that are configurable via the AT
command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with
the following interfaces, respectively:
"MBIM" : AT + MBIM + DIAG + NMEA + MODEM
"RMNET" : AT + DIAG + NMEA + Modem + QMI
The detailed description of the USB configuration for each mode as follows:
MBIM Mode
--------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0310 Rev= 3.18
S: Manufacturer=Quectel
S: Product=Quectel EM05-CN
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
RMNET Mode
--------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0310 Rev= 3.18
S: Manufacturer=Quectel
S: Product=Quectel EM05-CN
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -259,6 +259,7 @@ static void option_instat_callback(struc
#define QUECTEL_PRODUCT_EM05G 0x030a
#define QUECTEL_PRODUCT_EM060K 0x030b
#define QUECTEL_PRODUCT_EM05G_CS 0x030c
+#define QUECTEL_PRODUCT_EM05CN_SG 0x0310
#define QUECTEL_PRODUCT_EM05G_SG 0x0311
#define QUECTEL_PRODUCT_EM05G_GR 0x0313
#define QUECTEL_PRODUCT_EM05G_RS 0x0314
@@ -1166,6 +1167,8 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
+ { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05CN_SG, 0xff),
+ .driver_info = RSVD(6) | ZLP },
{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
.driver_info = RSVD(6) | ZLP },
{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_GR, 0xff),
next prev parent reply other threads:[~2023-01-22 15:06 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-22 15:04 [PATCH 4.14 00/25] 4.14.304-rc1 review Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 01/25] pNFS/filelayout: Fix coalescing test for single DS Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 02/25] net/ethtool/ioctl: return -EOPNOTSUPP if we have no phy stats Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 03/25] RDMA/srp: Move large values to a new enum for gcc13 Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 04/25] f2fs: lets avoid panic if extent_tree is not created Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 05/25] nilfs2: fix general protection fault in nilfs_btree_insert() Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 06/25] xhci-pci: set the dma max_seg_size Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 07/25] usb: xhci: Check endpoint is valid before dereferencing it Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 08/25] prlimit: do_prlimit needs to have a speculation check Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 09/25] USB: serial: option: add Quectel EM05-G (GR) modem Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 10/25] USB: serial: option: add Quectel EM05-G (CS) modem Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 11/25] USB: serial: option: add Quectel EM05-G (RS) modem Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 12/25] USB: serial: option: add Quectel EC200U modem Greg Kroah-Hartman
2023-01-22 15:04 ` Greg Kroah-Hartman [this message]
2023-01-22 15:04 ` [PATCH 4.14 14/25] USB: serial: option: add Quectel EM05CN modem Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 15/25] USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100 Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 16/25] usb: core: hub: disable autosuspend for TI TUSB8041 Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 17/25] USB: serial: cp210x: add SCALANCE LPE-9000 device id Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 18/25] usb: host: ehci-fsl: Fix module alias Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 19/25] usb: gadget: g_webcam: Send color matching descriptor per frame Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 20/25] usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate() Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 21/25] usb-storage: apply IGNORE_UAS only for HIKSEMI MD202 on RTL9210 Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 22/25] serial: pch_uart: Pass correct sg to dma_unmap_sg() Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 23/25] serial: atmel: fix incorrect baudrate setup Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 24/25] gsmi: fix null-deref in gsmi_get_variable Greg Kroah-Hartman
2023-01-22 15:04 ` [PATCH 4.14 25/25] x86/fpu: Use _Alignof to avoid undefined behavior in TYPE_ALIGN Greg Kroah-Hartman
2023-01-23 10:20 ` [PATCH 4.14 00/25] 4.14.304-rc1 review Naresh Kamboju
2023-01-24 2:43 ` Guenter Roeck
2023-01-25 10:34 ` Jon Hunter
2023-01-25 13:59 ` Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230122150218.384423882@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=duke_xinanwen@163.com \
--cc=johan@kernel.org \
--cc=patches@lists.linux.dev \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.