From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 90138C05027 for ; Mon, 23 Jan 2023 19:07:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232297AbjAWTHK (ORCPT ); Mon, 23 Jan 2023 14:07:10 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47022 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232139AbjAWTHI (ORCPT ); Mon, 23 Jan 2023 14:07:08 -0500 Received: from mail.hugovil.com (mail.hugovil.com [162.243.120.170]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 81A8230194; Mon, 23 Jan 2023 11:06:42 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=hugovil.com ; s=x; h=Subject:Content-Transfer-Encoding:Content-Type:Mime-Version: References:In-Reply-To:Message-Id:Cc:To:From:Date:Sender:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Id:List-Help:List-Unsubscribe:List-Subscribe: List-Post:List-Owner:List-Archive; bh=BL5etvgVmx5nN3ROwYBtJIgI/Ohtp7CHYizRYB08amM=; b=MeG35cAFNk4Khbd7My3FmS5A2c fD6xeYFpC+T31s1Tri6iFQfK6Wl64h28fJUWlSGPPqikso1VIXei4jNdInS44gRJSYUAp1+nXum4O 539ftqDeF4P0fs+226csriBTnPXwOXYiAuk/f/Zv2XsrmLy2vjU4/v9yzdTndJM8kz04=; Received: from modemcable168.174-80-70.mc.videotron.ca ([70.80.174.168]:41496 helo=pettiford) by mail.hugovil.com with esmtpa (Exim 4.92) (envelope-from ) id 1pK29K-0003aV-JL; Mon, 23 Jan 2023 14:06:36 -0500 Date: Mon, 23 Jan 2023 14:06:34 -0500 From: Hugo Villeneuve To: Bruno Thomsen Cc: a.zummo@towertech.it, alexandre.belloni@bootlin.com, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, linux-rtc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Hugo Villeneuve Message-Id: <20230123140634.10d3be57924139fa098878f9@hugovil.com> In-Reply-To: References: <20221215150214.1109074-1-hugo@hugovil.com> <20221215150214.1109074-8-hugo@hugovil.com> X-Mailer: Sylpheed 3.7.0 (GTK+ 2.24.33; x86_64-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-SA-Exim-Connect-IP: 70.80.174.168 X-SA-Exim-Mail-From: hugo@hugovil.com Subject: Re: [PATCH v3 07/14] rtc: pcf2127: add support for PCF2131 RTC X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on mail.hugovil.com) Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Sat, 7 Jan 2023 19:15:00 +0100 Bruno Thomsen wrote: > Den tor. 15. dec. 2022 kl. 16.20 skrev Hugo Villeneuve : > > > > From: Hugo Villeneuve > > > > This RTC is very similar in functionality to the PCF2127/29. > > > > Basically it: > > -supports two new control registers at offsets 4 and 5 > > -supports a new reset register (not implemented in this driver) > > -supports 4 tamper detection functions instead of 1 > > -has no nvmem (like the PCF2129) > > -has two output interrupt pins > > > > Because of that, most of the register addresses are very different, > > although they still follow the same layout. For example, the tamper > > registers have a different base address, but the offsets are all the same. > > > > Signed-off-by: Hugo Villeneuve > > --- > > drivers/rtc/Kconfig | 4 +- > > drivers/rtc/rtc-pcf2127.c | 234 ++++++++++++++++++++++++++++++++++---- > > 2 files changed, 215 insertions(+), 23 deletions(-) > > > > diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig > > index 2bb640d1521d..3d4043ce0057 100644 > > --- a/drivers/rtc/Kconfig > > +++ b/drivers/rtc/Kconfig > > @@ -910,9 +910,9 @@ config RTC_DRV_PCF2127 > > select REGMAP_SPI if SPI_MASTER > > select WATCHDOG_CORE if WATCHDOG > > help > > - If you say yes here you get support for the NXP PCF2127/29 RTC > > + If you say yes here you get support for the NXP PCF2127/29/31 RTC > > chips with integrated quartz crystal for industrial applications. > > - Both chips also have watchdog timer and tamper switch detection > > + These chips also have watchdog timer and tamper switch detection > > features. > > > > PCF2127 has an additional feature of 512 bytes battery backed > > diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c > > index 3265878edc48..4148e135f935 100644 > > --- a/drivers/rtc/rtc-pcf2127.c > > +++ b/drivers/rtc/rtc-pcf2127.c > > @@ -1,16 +1,26 @@ > > // SPDX-License-Identifier: GPL-2.0-only > > /* > > - * An I2C and SPI driver for the NXP PCF2127/29 RTC > > + * An I2C and SPI driver for the NXP PCF2127/29/31 RTC > > * Copyright 2013 Til-Technologies > > + * Copyright 2021 DimOnOff > > * > > * Author: Renaud Cerrato > > * > > * Watchdog and tamper functions > > * Author: Bruno Thomsen > > * > > + * PCF2131 support > > + * Author: Hugo Villeneuve > > + * > > * based on the other drivers in this same directory. > > * > > - * Datasheet: https://www.nxp.com/docs/en/data-sheet/PCF2127.pdf > > + * Datasheets: https://www.nxp.com/docs/en/data-sheet/PCF2127.pdf > > + * https://www.nxp.com/docs/en/data-sheet/PCF2131DS.pdf > > + */ > > + > > +/* > > + * The following features are not yet implemented for the PCF2131: > > + * - support for 1/100th seconds > > */ > > > > #include > > @@ -43,8 +53,30 @@ > > #define PCF2127_BIT_CTRL3_BLF BIT(2) > > #define PCF2127_BIT_CTRL3_BF BIT(3) > > #define PCF2127_BIT_CTRL3_BTSE BIT(4) > > +/* Control register 4 */ > > +#define PCF2131_REG_CTRL4 0x03 > > +#define PCF2131_BIT_CTRL4_TSF4 BIT(4) > > +#define PCF2131_BIT_CTRL4_TSF3 BIT(5) > > +#define PCF2131_BIT_CTRL4_TSF2 BIT(6) > > +#define PCF2131_BIT_CTRL4_TSF1 BIT(7) > > +/* Control register 5 */ > > +#define PCF2131_REG_CTRL5 0x04 > > +#define PCF2131_BIT_CTRL5_TSIE4 BIT(4) > > +#define PCF2131_BIT_CTRL5_TSIE3 BIT(5) > > +#define PCF2131_BIT_CTRL5_TSIE2 BIT(6) > > +#define PCF2131_BIT_CTRL5_TSIE1 BIT(7) > > +/* Software reset register */ > > +#define PCF2131_REG_SR_RESET 0x05 > > +#define PCF2131_SR_RESET_READ_PATTERN 0b00100100 /* Fixed pattern. */ > > Replace 0b00100100 with (BIT(2) | BIT(5)) Removed this define as the reset signature is no longer verified. > > +#define PCF2131_SR_RESET_RESET_CMD 0x2C /* SR is bit 3. */ > > Replace 0x2C with (BIT(2) | BIT(3) | BIT(5)) or > (PCF2131_SR_RESET_READ_PATTERN | BIT(3)) > and then drop the comment. Done. > > > /* Time and date registers */ > > #define PCF2127_REG_TIME_DATE_BASE 0x03 > > +#define PCF2131_REG_TIME_DATE_BASE 0x07 /* Register 0x06 is 100th seconds, > > + * but we do not support it. By > > + * using offset 0x07, we can be > > + * compatible with existing > > + * time/date functions. > > + */ > > I think you should add this rather big comment above > #define PCF2131_REG_TIME_DATE_BASE 0x07 Removed comment as suggested by Alexandre. > > and rename the define to PCF2131_REG_TIME_BASE. Done. > > > /* Time and date registers offsets (starting from base register) */ > > #define PCF2127_OFFSET_TD_SC 0 > > #define PCF2127_OFFSET_TD_MN 1 > > @@ -57,6 +89,7 @@ > > #define PCF2127_BIT_SC_OSF BIT(7) > > /* Alarm registers */ > > #define PCF2127_REG_ALARM_BASE 0x0A > > +#define PCF2131_REG_ALARM_BASE 0x0E > > /* Alarm registers offsets (starting from base register) */ > > #define PCF2127_OFFSET_ALARM_SC 0 > > #define PCF2127_OFFSET_ALARM_MN 1 > > @@ -67,16 +100,26 @@ > > #define PCF2127_BIT_ALARM_AE BIT(7) > > /* CLKOUT control register */ > > #define PCF2127_REG_CLKOUT 0x0f > > +#define PCF2131_REG_CLKOUT 0x13 > > #define PCF2127_BIT_CLKOUT_OTPR BIT(5) > > /* Watchdog registers */ > > #define PCF2127_REG_WD_CTL 0x10 > > +#define PCF2131_REG_WD_CTL 0x35 > > #define PCF2127_BIT_WD_CTL_TF0 BIT(0) > > #define PCF2127_BIT_WD_CTL_TF1 BIT(1) > > #define PCF2127_BIT_WD_CTL_CD0 BIT(6) > > #define PCF2127_BIT_WD_CTL_CD1 BIT(7) > > #define PCF2127_REG_WD_VAL 0x11 > > +#define PCF2131_REG_WD_VAL 0x36 > > /* Tamper timestamp1 registers */ > > #define PCF2127_REG_TS1_BASE 0x12 > > +#define PCF2131_REG_TS1_BASE 0x14 > > +/* Tamper timestamp2 registers */ > > +#define PCF2131_REG_TS2_BASE 0x1B > > +/* Tamper timestamp3 registers */ > > +#define PCF2131_REG_TS3_BASE 0x22 > > +/* Tamper timestamp4 registers */ > > +#define PCF2131_REG_TS4_BASE 0x29 > > /* Tamper timestamp registers common offsets (starting from base register) */ > > #define PCF2127_OFFSET_TS_CTL 0 > > #define PCF2127_OFFSET_TS_SC 1 > > @@ -92,11 +135,22 @@ > > * RAM registers > > * PCF2127 has 512 bytes general-purpose static RAM (SRAM) that is > > * battery backed and can survive a power outage. > > - * PCF2129 doesn't have this feature. > > + * PCF2129/31 doesn't have this feature. > > */ > > #define PCF2127_REG_RAM_ADDR_MSB 0x1A > > #define PCF2127_REG_RAM_WRT_CMD 0x1C > > #define PCF2127_REG_RAM_RD_CMD 0x1D > > +/* Interrupt mask registers */ > > +#define PCF2131_REG_INT_A_MASK1 0x31 > > +#define PCF2131_REG_INT_A_MASK2 0x32 > > +#define PCF2131_REG_INT_B_MASK1 0x33 > > +#define PCF2131_REG_INT_B_MASK2 0x34 > > +#define PCF2131_BIT_INT_BLIE BIT(0) > > +#define PCF2131_BIT_INT_BIE BIT(1) > > +#define PCF2131_BIT_INT_AIE BIT(2) > > +#define PCF2131_BIT_INT_WD_CD BIT(3) > > +#define PCF2131_BIT_INT_SI BIT(4) > > +#define PCF2131_BIT_INT_MI BIT(5) > > > > /* Watchdog timer value constants */ > > #define PCF2127_WD_VAL_STOP 0 > > @@ -110,6 +164,14 @@ > > PCF2127_BIT_CTRL2_AF | \ > > PCF2127_BIT_CTRL2_WDTF | \ > > PCF2127_BIT_CTRL2_TSF2) > > +#define PCF2131_CTRL2_IRQ_MASK ( \ > > + PCF2127_BIT_CTRL2_AF | \ > > + PCF2127_BIT_CTRL2_WDTF) > > +#define PCF2131_CTRL4_IRQ_MASK ( \ > > + PCF2131_BIT_CTRL4_TSF4 | \ > > + PCF2131_BIT_CTRL4_TSF3 | \ > > + PCF2131_BIT_CTRL4_TSF2 | \ > > + PCF2131_BIT_CTRL4_TSF1) > > > > struct pcf21xx_ts_config { > > u8 regs_base; /* Base register to read timestamp values. */ > > @@ -370,7 +432,7 @@ static int pcf2127_wdt_set_timeout(struct watchdog_device *wdd, > > } > > > > static const struct watchdog_info pcf2127_wdt_info = { > > - .identity = "NXP PCF2127/PCF2129 Watchdog", > > + .identity = "NXP PCF2127/29/31 Watchdog", > > .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, > > }; > > > > @@ -555,30 +617,64 @@ static void pcf2127_rtc_ts_snapshot(struct device *dev, int ts_id) > > static irqreturn_t pcf2127_rtc_irq(int irq, void *dev) > > { > > struct pcf2127 *pcf2127 = dev_get_drvdata(dev); > > - unsigned int ctrl1, ctrl2; > > + unsigned int ctrl2; > > int ret = 0; > > > > - ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL1, &ctrl1); > > - if (ret) > > - return IRQ_NONE; > > - > > ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL2, &ctrl2); > > if (ret) > > return IRQ_NONE; > > > > - if (!(ctrl1 & PCF2127_CTRL1_IRQ_MASK || ctrl2 & PCF2127_CTRL2_IRQ_MASK)) > > - return IRQ_NONE; > > + if (pcf2127->cfg->ts_count == 1) { > > + /* PCF2127/29 */ > > + unsigned int ctrl1; > > + > > + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL1, &ctrl1); > > + if (ret) > > + return IRQ_NONE; > > + > > + if (!(ctrl1 & PCF2127_CTRL1_IRQ_MASK || ctrl2 & PCF2127_CTRL2_IRQ_MASK)) > > + return IRQ_NONE; > > > > - if (ctrl1 & PCF2127_BIT_CTRL1_TSF1 || ctrl2 & PCF2127_BIT_CTRL2_TSF2) > > - pcf2127_rtc_ts_snapshot(dev, 0); > > + if (ctrl1 & PCF2127_BIT_CTRL1_TSF1 || ctrl2 & PCF2127_BIT_CTRL2_TSF2) > > + pcf2127_rtc_ts_snapshot(dev, 0); > > > > - if (ctrl1 & PCF2127_CTRL1_IRQ_MASK) > > - regmap_write(pcf2127->regmap, PCF2127_REG_CTRL1, > > - ctrl1 & ~PCF2127_CTRL1_IRQ_MASK); > > + if (ctrl1 & PCF2127_CTRL1_IRQ_MASK) > > + regmap_write(pcf2127->regmap, PCF2127_REG_CTRL1, > > + ctrl1 & ~PCF2127_CTRL1_IRQ_MASK); > > + > > + if (ctrl2 & PCF2127_CTRL2_IRQ_MASK) > > + regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2, > > + ctrl2 & ~PCF2127_CTRL2_IRQ_MASK); > > + } else { > > + /* PCF2131. */ > > + unsigned int ctrl4; > > + > > + ret = regmap_read(pcf2127->regmap, PCF2131_REG_CTRL4, &ctrl4); > > + if (ret) > > + return IRQ_NONE; > > > > - if (ctrl2 & PCF2127_CTRL2_IRQ_MASK) > > - regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2, > > - ctrl2 & ~PCF2127_CTRL2_IRQ_MASK); > > + if (!(ctrl4 & PCF2131_CTRL4_IRQ_MASK || ctrl2 & PCF2131_CTRL2_IRQ_MASK)) > > + return IRQ_NONE; > > + > > + if (ctrl4 & PCF2131_CTRL4_IRQ_MASK) { > > + int i; > > + int tsf_bit = PCF2131_BIT_CTRL4_TSF1; /* Start at bit 7. */ > > + > > + for (i = 0; i < pcf2127->cfg->ts_count; i++) { > > + if (ctrl4 & tsf_bit) > > + pcf2127_rtc_ts_snapshot(dev, i); > > + > > + tsf_bit = tsf_bit >> 1; > > + } > > + > > + regmap_write(pcf2127->regmap, PCF2131_REG_CTRL4, > > + ctrl4 & ~PCF2131_CTRL4_IRQ_MASK); > > + } > > + > > + if (ctrl2 & PCF2131_CTRL2_IRQ_MASK) > > + regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2, > > + ctrl2 & ~PCF2131_CTRL2_IRQ_MASK); > > + } > > > > if (ctrl2 & PCF2127_BIT_CTRL2_AF) > > rtc_update_irq(pcf2127->rtc, 1, RTC_IRQF | RTC_AF); > > @@ -650,6 +746,27 @@ static ssize_t timestamp0_store(struct device *dev, > > return timestamp_store(dev, attr, buf, count, 0); > > }; > > > > +static ssize_t timestamp1_store(struct device *dev, > > + struct device_attribute *attr, > > + const char *buf, size_t count) > > +{ > > + return timestamp_store(dev, attr, buf, count, 1); > > +}; > > + > > +static ssize_t timestamp2_store(struct device *dev, > > + struct device_attribute *attr, > > + const char *buf, size_t count) > > +{ > > + return timestamp_store(dev, attr, buf, count, 2); > > +}; > > + > > +static ssize_t timestamp3_store(struct device *dev, > > + struct device_attribute *attr, > > + const char *buf, size_t count) > > +{ > > + return timestamp_store(dev, attr, buf, count, 3); > > +}; > > + > > static ssize_t timestamp_show(struct device *dev, > > struct device_attribute *attr, char *buf, > > int ts_id) > > @@ -714,16 +831,46 @@ static ssize_t timestamp0_show(struct device *dev, > > return timestamp_show(dev, attr, buf, 0); > > }; > > > > +static ssize_t timestamp1_show(struct device *dev, > > + struct device_attribute *attr, char *buf) > > +{ > > + return timestamp_show(dev, attr, buf, 1); > > +}; > > + > > +static ssize_t timestamp2_show(struct device *dev, > > + struct device_attribute *attr, char *buf) > > +{ > > + return timestamp_show(dev, attr, buf, 2); > > +}; > > + > > +static ssize_t timestamp3_show(struct device *dev, > > + struct device_attribute *attr, char *buf) > > +{ > > + return timestamp_show(dev, attr, buf, 3); > > +}; > > + > > static DEVICE_ATTR_RW(timestamp0); > > +static DEVICE_ATTR_RW(timestamp1); > > +static DEVICE_ATTR_RW(timestamp2); > > +static DEVICE_ATTR_RW(timestamp3); > > > > static struct attribute *pcf2127_attrs[] = { > > &dev_attr_timestamp0.attr, > > NULL > > }; > > > > +static struct attribute *pcf2131_attrs[] = { > > + &dev_attr_timestamp0.attr, > > + &dev_attr_timestamp1.attr, > > + &dev_attr_timestamp2.attr, > > + &dev_attr_timestamp3.attr, > > + NULL > > +}; > > + > > enum pcf21xx_type { > > PCF2127, > > PCF2129, > > + PCF2131, > > PCF21XX_LAST_ID > > }; > > > > @@ -774,6 +921,48 @@ static struct pcf21xx_config pcf21xx_cfg[] = { > > .attrs = pcf2127_attrs, > > }, > > }, > > + [PCF2131] = { > > + .max_register = 0x36, > > + .has_nvmem = 0, > > + .has_bit_wd_ctl_cd0 = 0, > > + .regs_td_base = PCF2131_REG_TIME_DATE_BASE, > > + .regs_alarm_base = PCF2131_REG_ALARM_BASE, > > + .reg_wd_ctl = PCF2131_REG_WD_CTL, > > + .reg_wd_val = PCF2131_REG_WD_VAL, > > + .reg_clkout = PCF2131_REG_CLKOUT, > > + .ts_count = 4, > > + .ts[0] = { > > + .regs_base = PCF2131_REG_TS1_BASE, > > + .low_reg = PCF2131_REG_CTRL4, > > + .low_bit = PCF2131_BIT_CTRL4_TSF1, > > Set .inter_bit to 0 as it's used/read in timestamp_store() to > control flow in if-condition. Done for all 4 ts[] structures. > > > + .ie_reg = PCF2131_REG_CTRL5, > > + .ie_bit = PCF2131_BIT_CTRL5_TSIE1, > > + }, > > + .ts[1] = { > > + .regs_base = PCF2131_REG_TS2_BASE, > > + .low_reg = PCF2131_REG_CTRL4, > > + .low_bit = PCF2131_BIT_CTRL4_TSF2, > > + .ie_reg = PCF2131_REG_CTRL5, > > + .ie_bit = PCF2131_BIT_CTRL5_TSIE2, > > + }, > > + .ts[2] = { > > + .regs_base = PCF2131_REG_TS3_BASE, > > + .low_reg = PCF2131_REG_CTRL4, > > + .low_bit = PCF2131_BIT_CTRL4_TSF3, > > + .ie_reg = PCF2131_REG_CTRL5, > > + .ie_bit = PCF2131_BIT_CTRL5_TSIE3, > > + }, > > + .ts[3] = { > > + .regs_base = PCF2131_REG_TS4_BASE, > > + .low_reg = PCF2131_REG_CTRL4, > > + .low_bit = PCF2131_BIT_CTRL4_TSF4, > > + .ie_reg = PCF2131_REG_CTRL5, > > + .ie_bit = PCF2131_BIT_CTRL5_TSIE4, > > + }, > > + .attribute_group = { > > + .attrs = pcf2131_attrs, > > + }, > > + }, > > }; > > > > /* > > @@ -922,7 +1111,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap, > > * Watchdog timer enabled and reset pin /RST activated when timed out. > > * Select 1Hz clock source for watchdog timer. > > * Note: Countdown timer disabled and not available. > > - * For pca2129, pcf2129, only bit[7] is for Symbol WD_CD > > + * For pca2129, pcf2129 and pcf2131, only bit[7] is for Symbol WD_CD > > * of register watchdg_tim_ctl. The bit[6] is labeled > > * as T. Bits labeled as T must always be written with > > * logic 0. > > @@ -982,6 +1171,7 @@ static const struct of_device_id pcf2127_of_match[] = { > > { .compatible = "nxp,pcf2127", .data = &pcf21xx_cfg[PCF2127] }, > > { .compatible = "nxp,pcf2129", .data = &pcf21xx_cfg[PCF2129] }, > > { .compatible = "nxp,pca2129", .data = &pcf21xx_cfg[PCF2129] }, > > + { .compatible = "nxp,pcf2131", .data = &pcf21xx_cfg[PCF2131] }, > > {} > > }; > > MODULE_DEVICE_TABLE(of, pcf2127_of_match); > > @@ -1069,6 +1259,7 @@ static const struct i2c_device_id pcf2127_i2c_id[] = { > > { "pcf2127", PCF2127 }, > > { "pcf2129", PCF2129 }, > > { "pca2129", PCF2129 }, > > + { "pcf2131", PCF2131 }, > > { } > > }; > > MODULE_DEVICE_TABLE(i2c, pcf2127_i2c_id); > > @@ -1190,6 +1381,7 @@ static const struct spi_device_id pcf2127_spi_id[] = { > > { "pcf2127", PCF2127 }, > > { "pcf2129", PCF2129 }, > > { "pca2129", PCF2129 }, > > + { "pcf2131", PCF2131 }, > > { } > > }; > > MODULE_DEVICE_TABLE(spi, pcf2127_spi_id); > > @@ -1254,5 +1446,5 @@ static void __exit pcf2127_exit(void) > > module_exit(pcf2127_exit) > > > > MODULE_AUTHOR("Renaud Cerrato "); > > -MODULE_DESCRIPTION("NXP PCF2127/29 RTC driver"); > > +MODULE_DESCRIPTION("NXP PCF2127/29/31 RTC driver"); > > MODULE_LICENSE("GPL v2"); > > -- > > 2.30.2 > > > -- Hugo Villeneuve