From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: "Lars-Peter Clausen" <lars@metafoo.de>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Lucas Stankus" <lucas.p.stankus@gmail.com>,
"Puranjay Mohan" <puranjay12@gmail.com>,
"Dmitry Rokosov" <ddrokosov@sberdevices.ru>,
"Alexandru Tachici" <alexandru.tachici@analog.com>,
"Marcelo Schmitt" <marcelo.schmitt1@gmail.com>,
"Renato Lui Geh" <renatogeh@gmail.com>,
"Eugen Hristev" <eugen.hristev@microchip.com>,
"Nicolas Ferre" <nicolas.ferre@microchip.com>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Claudiu Beznea" <claudiu.beznea@microchip.com>,
"Andreas Klinger" <ak@it-klinger.de>,
"Marcus Folkesson" <marcus.folkesson@gmail.com>,
"Kent Gustavsson" <kent@minoris.se>,
"Lad Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com>,
"Alim Akhtar" <alim.akhtar@samsung.com>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
"Oleksij Rempel" <linux@rempel-privat.de>,
kernel@pengutronix.de, "Nuno Sá" <nuno.sa@analog.com>,
"Nishant Malpani" <nish.malpani25@gmail.com>,
"Rui Miguel Silva" <rmfrfs@gmail.com>,
"Dragos Bogdan" <dragos.bogdan@analog.com>,
"Jean-Baptiste Maneyrol" <jmaneyrol@invensense.com>,
"Lorenzo Bianconi" <lorenzo@kernel.org>,
"Benson Leung" <bleung@chromium.org>,
"Guenter Roeck" <groeck@chromium.org>,
"Stefan Popa" <stefan.popa@analog.com>,
"Robert Yang" <decatf@gmail.com>,
"Sean Nyekjaer" <sean@geanix.com>,
"Artur Rojek" <contact@artur-rojek.eu>,
"Miquel Raynal" <miquel.raynal@bootlin.com>,
"Philippe Reynes" <tremyfr@yahoo.fr>,
"Alexandru Lazar" <alazar@startmail.com>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Caleb Connolly" <caleb.connolly@linaro.org>,
"Fabrice Gasnier" <fabrice.gasnier@foss.st.com>,
"Stefan Agner" <stefan@agner.ch>,
"Daniel Baluta" <daniel.baluta@nxp.com>,
"Harald Geyer" <harald@ccbib.org>,
"Eugene Zaikonnikov" <ez@norophonic.com>,
"Phil Reid" <preid@electromag.com.au>,
"Matt Ranostay" <matt.ranostay@konsulko.com>,
"Stephen Boyd" <swboyd@chromium.org>,
"Sankar Velliangiri" <navin@linumiz.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-renesas-soc@vger.kernel.org,
linux-samsung-soc@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
chrome-platform@lists.linux.dev
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Rob Herring <robh@kernel.org>
Subject: [PATCH v2 5/5] dt-bindings: iio: cleanup examples - indentation
Date: Tue, 24 Jan 2023 09:10:37 +0100 [thread overview]
Message-ID: <20230124081037.31013-5-krzysztof.kozlowski@linaro.org> (raw)
In-Reply-To: <20230124081037.31013-1-krzysztof.kozlowski@linaro.org>
Use 4-space indentation (for cases when it is neither 4 not 2 space).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexandru Lazar <alazar@startmail.com> # max1241
Acked-by: Rob Herring <robh@kernel.org>
---
Changes since v1:
1. Add tags
2. Correct indentation in ad7192 (Rob)
---
.../bindings/iio/accel/adi,adxl355.yaml | 52 +++----
.../bindings/iio/accel/adi,adxl372.yaml | 48 +++---
.../bindings/iio/adc/adi,ad7091r5.yaml | 8 +-
.../bindings/iio/adc/adi,ad7192.yaml | 40 ++---
.../bindings/iio/adc/adi,ad7606.yaml | 38 ++---
.../bindings/iio/adc/adi,ad799x.yaml | 18 +--
.../bindings/iio/adc/adi,ad9467.yaml | 8 +-
.../bindings/iio/adc/adi,axi-adc.yaml | 10 +-
.../bindings/iio/adc/ingenic,adc.yaml | 14 +-
.../bindings/iio/adc/maxim,max1027.yaml | 4 +-
.../bindings/iio/adc/maxim,max1241.yaml | 4 +-
.../bindings/iio/adc/qcom,pm8018-adc.yaml | 2 +-
.../bindings/iio/adc/qcom,spmi-rradc.yaml | 16 +-
.../bindings/iio/adc/samsung,exynos-adc.yaml | 2 +-
.../bindings/iio/adc/ti,ads1015.yaml | 8 +-
.../bindings/iio/adc/ti,tsc2046.yaml | 32 ++--
.../bindings/iio/dac/adi,ad3552r.yaml | 40 ++---
.../bindings/iio/dac/adi,ad5766.yaml | 22 +--
.../bindings/iio/dac/adi,ad5770r.yaml | 88 +++++------
.../bindings/iio/dac/adi,ltc2688.yaml | 52 +++----
.../bindings/iio/dac/lltc,ltc2632.yaml | 16 +-
.../bindings/iio/frequency/adf4371.yaml | 10 +-
.../bindings/iio/gyroscope/adi,adxrs290.yaml | 14 +-
.../iio/gyroscope/nxp,fxas21002c.yaml | 26 ++--
.../bindings/iio/humidity/ti,hdc2010.yaml | 12 +-
.../bindings/iio/imu/adi,adis16475.yaml | 24 +--
.../bindings/iio/imu/bosch,bmi160.yaml | 32 ++--
.../bindings/iio/imu/invensense,icm42600.yaml | 30 ++--
.../bindings/iio/imu/nxp,fxos8700.yaml | 22 +--
.../iio/magnetometer/yamaha,yas530.yaml | 18 +--
.../bindings/iio/pressure/bmp085.yaml | 22 +--
.../bindings/iio/proximity/ams,as3935.yaml | 2 +-
.../bindings/iio/temperature/adi,ltc2983.yaml | 137 +++++++++---------
.../iio/temperature/maxim,max31865.yaml | 10 +-
34 files changed, 440 insertions(+), 441 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
index 6b03c4efbb08..c07261c71013 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
@@ -58,34 +58,34 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
- /* Example for a I2C device node */
- accelerometer@1d {
- compatible = "adi,adxl355";
- reg = <0x1d>;
- interrupt-parent = <&gpio>;
- interrupts = <25 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "DRDY";
- };
+ /* Example for a I2C device node */
+ accelerometer@1d {
+ compatible = "adi,adxl355";
+ reg = <0x1d>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "DRDY";
};
+ };
- |
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- spi {
- #address-cells = <1>;
- #size-cells = <0>;
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
- accelerometer@0 {
- compatible = "adi,adxl355";
- reg = <0>;
- spi-max-frequency = <1000000>;
- interrupt-parent = <&gpio>;
- interrupts = <25 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "DRDY";
- };
+ accelerometer@0 {
+ compatible = "adi,adxl355";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "DRDY";
};
+ };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
index 73a5c8f814cc..62465e36a590 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -37,32 +37,32 @@ unevaluatedProperties: false
examples:
- |
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
- #address-cells = <1>;
- #size-cells = <0>;
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
- /* Example for a I2C device node */
- accelerometer@53 {
- compatible = "adi,adxl372";
- reg = <0x53>;
- interrupt-parent = <&gpio>;
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
- };
+ /* Example for a I2C device node */
+ accelerometer@53 {
+ compatible = "adi,adxl372";
+ reg = <0x53>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
};
+ };
- |
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
- #address-cells = <1>;
- #size-cells = <0>;
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
- accelerometer@0 {
- compatible = "adi,adxl372";
- reg = <0>;
- spi-max-frequency = <1000000>;
- interrupt-parent = <&gpio>;
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
- };
+ accelerometer@0 {
+ compatible = "adi,adxl372";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
};
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
index b97559f23b3a..ce7ba634643c 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
@@ -44,11 +44,11 @@ examples:
#size-cells = <0>;
adc@2f {
- compatible = "adi,ad7091r5";
- reg = <0x2f>;
+ compatible = "adi,ad7091r5";
+ reg = <0x2f>;
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
- interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index 1d965124c488..d521d516088b 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -100,25 +100,25 @@ unevaluatedProperties: false
examples:
- |
spi {
- #address-cells = <1>;
- #size-cells = <0>;
-
- adc@0 {
- compatible = "adi,ad7192";
- reg = <0>;
- spi-max-frequency = <1000000>;
- spi-cpol;
- spi-cpha;
- clocks = <&ad7192_mclk>;
- clock-names = "mclk";
- interrupts = <25 0x2>;
- interrupt-parent = <&gpio>;
- dvdd-supply = <&dvdd>;
- avdd-supply = <&avdd>;
-
- adi,refin2-pins-enable;
- adi,rejection-60-Hz-enable;
- adi,buffer-enable;
- adi,burnout-currents-enable;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,ad7192";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+ spi-cpha;
+ clocks = <&ad7192_mclk>;
+ clock-names = "mclk";
+ interrupts = <25 0x2>;
+ interrupt-parent = <&gpio>;
+ dvdd-supply = <&dvdd>;
+ avdd-supply = <&avdd>;
+
+ adi,refin2-pins-enable;
+ adi,rejection-60-Hz-enable;
+ adi,buffer-enable;
+ adi,burnout-currents-enable;
};
};
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index b05652dfd4a2..7fa46df1f4fb 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -117,25 +117,25 @@ examples:
#size-cells = <0>;
adc@0 {
- compatible = "adi,ad7606-8";
- reg = <0>;
- spi-max-frequency = <1000000>;
- spi-cpol;
- spi-cpha;
-
- avcc-supply = <&adc_vref>;
-
- interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
- interrupt-parent = <&gpio>;
-
- adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
- adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
- adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
- <&gpio 23 GPIO_ACTIVE_HIGH>,
- <&gpio 26 GPIO_ACTIVE_HIGH>;
- standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
- adi,sw-mode;
+ compatible = "adi,ad7606-8";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+ spi-cpha;
+
+ avcc-supply = <&adc_vref>;
+
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+
+ adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+ adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
+ <&gpio 23 GPIO_ACTIVE_HIGH>,
+ <&gpio 26 GPIO_ACTIVE_HIGH>;
+ standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ adi,sw-mode;
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
index 29641ce7175b..433ed2c9295f 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
@@ -57,17 +57,17 @@ additionalProperties: false
examples:
- |
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- adc1: adc@28 {
- reg = <0x28>;
- compatible = "adi,ad7991";
- interrupts = <13 2>;
- interrupt-parent = <&gpio6>;
+ adc1: adc@28 {
+ reg = <0x28>;
+ compatible = "adi,ad7991";
+ interrupts = <13 2>;
+ interrupt-parent = <&gpio6>;
- vcc-supply = <&vcc_3v3>;
- vref-supply = <&adc_vref>;
+ vcc-supply = <&vcc_3v3>;
+ vref-supply = <&adc_vref>;
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
index 2d72ff6bcbc0..7aa748d6b7a0 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
@@ -64,10 +64,10 @@ examples:
#size-cells = <0>;
adc@0 {
- compatible = "adi,ad9467";
- reg = <0>;
- clocks = <&adc_clk>;
- clock-names = "adc-clk";
+ compatible = "adi,ad9467";
+ reg = <0>;
+ clocks = <&adc_clk>;
+ clock-names = "adc-clk";
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
index 8e25773d69be..9996dd93f84b 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -51,11 +51,11 @@ additionalProperties: false
examples:
- |
axi-adc@44a00000 {
- compatible = "adi,axi-adc-10.0.a";
- reg = <0x44a00000 0x10000>;
- dmas = <&rx_dma 0>;
- dma-names = "rx";
+ compatible = "adi,axi-adc-10.0.a";
+ reg = <0x44a00000 0x10000>;
+ dmas = <&rx_dma 0>;
+ dma-names = "rx";
- adi,adc-dev = <&spi_adc>;
+ adi,adc-dev = <&spi_adc>;
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
index b71c951e6d02..9cd0fd539782 100644
--- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
@@ -78,14 +78,14 @@ examples:
#include <dt-bindings/iio/adc/ingenic,adc.h>
adc@10070000 {
- compatible = "ingenic,jz4740-adc";
- #io-channel-cells = <1>;
+ compatible = "ingenic,jz4740-adc";
+ #io-channel-cells = <1>;
- reg = <0x10070000 0x30>;
+ reg = <0x10070000 0x30>;
- clocks = <&cgu JZ4740_CLK_ADC>;
- clock-names = "adc";
+ clocks = <&cgu JZ4740_CLK_ADC>;
+ clock-names = "adc";
- interrupt-parent = <&intc>;
- interrupts = <18>;
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
};
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
index d0a7ed26d9ea..e4b362113509 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
@@ -54,8 +54,8 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
spi {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
maxadc: adc@0 {
compatible = "maxim,max1027";
reg = <0>;
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
index 58b12fe8070c..ef8d51e74c08 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -54,8 +54,8 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
spi {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
adc@0 {
compatible = "maxim,max1241";
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
index d186b713d6a7..58ea1ca4a5ee 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
@@ -160,7 +160,7 @@ examples:
};
ref_muxoff: adc-channel@f {
reg = <0x00 0x0f>;
- };
+ };
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
index c8cbfd3444be..b3a626389870 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
@@ -40,12 +40,12 @@ additionalProperties: false
examples:
- |
pmic {
- #address-cells = <1>;
- #size-cells = <0>;
-
- pmic_rradc: adc@4500 {
- compatible = "qcom,pmi8998-rradc";
- reg = <0x4500>;
- #io-channel-cells = <1>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic_rradc: adc@4500 {
+ compatible = "qcom,pmi8998-rradc";
+ reg = <0x4500>;
+ #io-channel-cells = <1>;
+ };
};
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index dca6cfe1e88e..582d0a03b814 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -142,7 +142,7 @@ examples:
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 4>;
- };
+ };
};
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
index 2c3c2cf2145c..2127d639a768 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
@@ -104,12 +104,12 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
channel@0 {
- reg = <0>;
+ reg = <0>;
};
channel@4 {
- reg = <4>;
- ti,gain = <3>;
- ti,datarate = <5>;
+ reg = <4>;
+ ti,gain = <3>;
+ ti,datarate = <5>;
};
};
};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
index 32c52f9fe18b..866a05c9db36 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
@@ -83,36 +83,36 @@ examples:
#size-cells = <0>;
channel@0 {
- reg = <0>;
+ reg = <0>;
};
channel@1 {
- reg = <1>;
- settling-time-us = <700>;
- oversampling-ratio = <5>;
+ reg = <1>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
};
channel@2 {
- reg = <2>;
+ reg = <2>;
};
channel@3 {
- reg = <3>;
- settling-time-us = <700>;
- oversampling-ratio = <5>;
+ reg = <3>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
};
channel@4 {
- reg = <4>;
- settling-time-us = <700>;
- oversampling-ratio = <5>;
+ reg = <4>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
};
channel@5 {
- reg = <5>;
- settling-time-us = <700>;
- oversampling-ratio = <5>;
+ reg = <5>;
+ settling-time-us = <700>;
+ oversampling-ratio = <5>;
};
channel@6 {
- reg = <6>;
+ reg = <6>;
};
channel@7 {
- reg = <7>;
+ reg = <7>;
};
};
};
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
index fee0f023a8c8..96340a05754c 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -192,26 +192,26 @@ additionalProperties: false
examples:
- |
spi {
- #address-cells = <1>;
- #size-cells = <0>;
- ad3552r@0 {
- compatible = "adi,ad3552r";
- reg = <0>;
- spi-max-frequency = <20000000>;
- #address-cells = <1>;
- #size-cells = <0>;
- channel@0 {
- reg = <0>;
- adi,output-range-microvolt = <0 10000000>;
- };
- channel@1 {
- reg = <1>;
- custom-output-range-config {
- adi,gain-offset = <5>;
- adi,gain-scaling-p-inv-log2 = <1>;
- adi,gain-scaling-n-inv-log2 = <2>;
- adi,rfb-ohms = <1>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ad3552r@0 {
+ compatible = "adi,ad3552r";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@0 {
+ reg = <0>;
+ adi,output-range-microvolt = <0 10000000>;
+ };
+ channel@1 {
+ reg = <1>;
+ custom-output-range-config {
+ adi,gain-offset = <5>;
+ adi,gain-scaling-p-inv-log2 = <1>;
+ adi,gain-scaling-n-inv-log2 = <2>;
+ adi,rfb-ohms = <1>;
+ };
};
};
};
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
index 3c8784a54d2c..212c936bab8d 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
@@ -51,15 +51,15 @@ additionalProperties: false
examples:
- |
spi {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- ad5766@0 {
- compatible = "adi,ad5766";
- output-range-microvolts = <(-5000000) 5000000>;
- reg = <0>;
- spi-cpol;
- spi-max-frequency = <1000000>;
- reset-gpios = <&gpio 22 0>;
- };
- };
+ ad5766@0 {
+ compatible = "adi,ad5766";
+ output-range-microvolts = <(-5000000) 5000000>;
+ reg = <0>;
+ spi-cpol;
+ spi-max-frequency = <1000000>;
+ reset-gpios = <&gpio 22 0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
index 8e7da0de918f..82b0eed6a7b7 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -147,49 +147,49 @@ unevaluatedProperties: false
examples:
- |
- spi {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ad5770r@0 {
- compatible = "adi,ad5770r";
- reg = <0>;
- spi-max-frequency = <1000000>;
- vref-supply = <&vref>;
- adi,external-resistor;
- reset-gpios = <&gpio 22 0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- channel@0 {
- reg = <0>;
- adi,range-microamp = <0 300000>;
- };
-
- channel@1 {
- reg = <1>;
- adi,range-microamp = <0 140000>;
- };
-
- channel@2 {
- reg = <2>;
- adi,range-microamp = <0 55000>;
- };
-
- channel@3 {
- reg = <3>;
- adi,range-microamp = <0 45000>;
- };
-
- channel@4 {
- reg = <4>;
- adi,range-microamp = <0 45000>;
- };
-
- channel@5 {
- reg = <5>;
- adi,range-microamp = <0 45000>;
- };
- };
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ad5770r@0 {
+ compatible = "adi,ad5770r";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ vref-supply = <&vref>;
+ adi,external-resistor;
+ reset-gpios = <&gpio 22 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ adi,range-microamp = <0 300000>;
+ };
+
+ channel@1 {
+ reg = <1>;
+ adi,range-microamp = <0 140000>;
+ };
+
+ channel@2 {
+ reg = <2>;
+ adi,range-microamp = <0 55000>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ adi,range-microamp = <0 45000>;
+ };
+
+ channel@4 {
+ reg = <4>;
+ adi,range-microamp = <0 45000>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ adi,range-microamp = <0 45000>;
+ };
};
+ };
...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
index 15cc6bf59b13..f22ef710ecde 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
@@ -116,32 +116,32 @@ examples:
- |
spi {
- #address-cells = <1>;
- #size-cells = <0>;
- ltc2688: ltc2688@0 {
- compatible = "adi,ltc2688";
- reg = <0>;
-
- vcc-supply = <&vcc>;
- iovcc-supply = <&vcc>;
- vref-supply = <&vref>;
-
- #address-cells = <1>;
- #size-cells = <0>;
- channel@0 {
- reg = <0>;
- adi,toggle-mode;
- adi,overrange;
- };
-
- channel@1 {
- reg = <1>;
- adi,output-range-microvolt = <0 10000000>;
-
- clocks = <&clock_tgp3>;
- adi,toggle-dither-input = <2>;
- };
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ltc2688: ltc2688@0 {
+ compatible = "adi,ltc2688";
+ reg = <0>;
+
+ vcc-supply = <&vcc>;
+ iovcc-supply = <&vcc>;
+ vref-supply = <&vref>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@0 {
+ reg = <0>;
+ adi,toggle-mode;
+ adi,overrange;
+ };
+
+ channel@1 {
+ reg = <1>;
+ adi,output-range-microvolt = <0 10000000>;
+
+ clocks = <&clock_tgp3>;
+ adi,toggle-dither-input = <2>;
+ };
+ };
};
...
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
index c9e3be3b5754..733edc7d6d17 100644
--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
@@ -64,14 +64,14 @@ examples:
};
spi {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- dac@0 {
- compatible = "lltc,ltc2632-l12";
- reg = <0>; /* CS0 */
- spi-max-frequency = <1000000>;
- vref-supply = <&vref>;
- };
+ dac@0 {
+ compatible = "lltc,ltc2632-l12";
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <1000000>;
+ vref-supply = <&vref>;
+ };
};
...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
index a0a5e5919987..1cb2adaf66f9 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -58,11 +58,11 @@ examples:
#size-cells = <0>;
frequency@0 {
- compatible = "adi,adf4371";
- reg = <0>;
- spi-max-frequency = <1000000>;
- clocks = <&adf4371_clkin>;
- clock-names = "clkin";
+ compatible = "adi,adf4371";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ clocks = <&adf4371_clkin>;
+ clock-names = "clkin";
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
index 0ae2464b9bc4..3d94dd4612c4 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
@@ -50,13 +50,13 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
gyro@0 {
- compatible = "adi,adxrs290";
- reg = <0>;
- spi-max-frequency = <5000000>;
- spi-cpol;
- spi-cpha;
- interrupt-parent = <&gpio>;
- interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ compatible = "adi,adxrs290";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ spi-cpol;
+ spi-cpha;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
index 052dccbb5eea..297d519d68f2 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
@@ -70,15 +70,15 @@ examples:
#size-cells = <0>;
gyroscope@20 {
- compatible = "nxp,fxas21002c";
- reg = <0x20>;
+ compatible = "nxp,fxas21002c";
+ reg = <0x20>;
- vdd-supply = <®_peri_3p15v>;
- vddio-supply = <®_peri_3p15v>;
+ vdd-supply = <®_peri_3p15v>;
+ vddio-supply = <®_peri_3p15v>;
- interrupt-parent = <&gpio1>;
- interrupts = <7 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "INT1";
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT1";
};
};
spi {
@@ -86,13 +86,13 @@ examples:
#size-cells = <0>;
gyroscope@0 {
- compatible = "nxp,fxas21002c";
- reg = <0x0>;
+ compatible = "nxp,fxas21002c";
+ reg = <0x0>;
- spi-max-frequency = <2000000>;
+ spi-max-frequency = <2000000>;
- interrupt-parent = <&gpio2>;
- interrupts = <7 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "INT2";
+ interrupt-parent = <&gpio2>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT2";
};
};
diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
index a36173b0c654..a2bc1fa92da0 100644
--- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
@@ -36,11 +36,11 @@ additionalProperties: false
examples:
- |
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- humidity@40 {
- compatible = "ti,hdc2010";
- reg = <0x40>;
- };
+ humidity@40 {
+ compatible = "ti,hdc2010";
+ reg = <0x40>;
+ };
};
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
index 5dbfae80bb28..c73533c54588 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
@@ -114,17 +114,17 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
spi {
- #address-cells = <1>;
- #size-cells = <0>;
-
- adis16475: adis16475-3@0 {
- compatible = "adi,adis16475-3";
- reg = <0>;
- spi-cpha;
- spi-cpol;
- spi-max-frequency = <2000000>;
- interrupts = <4 IRQ_TYPE_EDGE_RISING>;
- interrupt-parent = <&gpio>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adis16475: adis16475-3@0 {
+ compatible = "adi,adis16475-3";
+ reg = <0>;
+ spi-cpha;
+ spi-cpol;
+ spi-max-frequency = <2000000>;
+ interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gpio>;
+ };
};
...
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
index a0760382548d..47cfba939ca6 100644
--- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -64,16 +64,16 @@ examples:
#size-cells = <0>;
bmi160@68 {
- compatible = "bosch,bmi160";
- reg = <0x68>;
- vdd-supply = <&pm8916_l17>;
- vddio-supply = <&pm8916_l6>;
- interrupt-parent = <&gpio4>;
- interrupts = <12 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "INT1";
- mount-matrix = "0", "1", "0",
- "-1", "0", "0",
- "0", "0", "1";
+ compatible = "bosch,bmi160";
+ reg = <0x68>;
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT1";
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
};
};
- |
@@ -84,11 +84,11 @@ examples:
#size-cells = <0>;
bmi160@0 {
- compatible = "bosch,bmi160";
- reg = <0>;
- spi-max-frequency = <10000000>;
- interrupt-parent = <&gpio2>;
- interrupts = <12 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "INT2";
+ compatible = "bosch,bmi160";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT2";
};
};
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 3ecfb3f086bc..7cd05bcbee31 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -70,12 +70,12 @@ examples:
#size-cells = <0>;
icm42605@68 {
- compatible = "invensense,icm42605";
- reg = <0x68>;
- interrupt-parent = <&gpio2>;
- interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
- vdd-supply = <&vdd>;
- vddio-supply = <&vddio>;
+ compatible = "invensense,icm42605";
+ reg = <0x68>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&vdd>;
+ vddio-supply = <&vddio>;
};
};
- |
@@ -86,14 +86,14 @@ examples:
#size-cells = <0>;
icm42602@0 {
- compatible = "invensense,icm42602";
- reg = <0>;
- spi-max-frequency = <24000000>;
- spi-cpha;
- spi-cpol;
- interrupt-parent = <&gpio1>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
- vdd-supply = <&vdd>;
- vddio-supply = <&vddio>;
+ compatible = "invensense,icm42602";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ spi-cpha;
+ spi-cpol;
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&vdd>;
+ vddio-supply = <&vddio>;
};
};
diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
index db6a145840f7..688100b240bc 100644
--- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -54,12 +54,12 @@ examples:
#size-cells = <0>;
fxos8700@1e {
- compatible = "nxp,fxos8700";
- reg = <0x1e>;
+ compatible = "nxp,fxos8700";
+ reg = <0x1e>;
- interrupt-parent = <&gpio2>;
- interrupts = <7 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "INT1";
+ interrupt-parent = <&gpio2>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT1";
};
};
- |
@@ -70,12 +70,12 @@ examples:
#size-cells = <0>;
fxos8700@0 {
- compatible = "nxp,fxos8700";
- reg = <0>;
+ compatible = "nxp,fxos8700";
+ reg = <0>;
- spi-max-frequency = <1000000>;
- interrupt-parent = <&gpio1>;
- interrupts = <7 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "INT2";
+ spi-max-frequency = <1000000>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "INT2";
};
};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
index 9438fffaf0ba..877226e9219b 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
@@ -91,12 +91,12 @@ examples:
#size-cells = <0>;
magnetometer@2e {
- compatible = "yamaha,yas530";
- reg = <0x2e>;
- vdd-supply = <&ldo1_reg>;
- iovdd-supply = <&ldo2_reg>;
- reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
- interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+ compatible = "yamaha,yas530";
+ reg = <0x2e>;
+ vdd-supply = <&ldo1_reg>;
+ iovdd-supply = <&ldo2_reg>;
+ reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+ interrupts = <13 IRQ_TYPE_EDGE_RISING>;
};
};
@@ -105,8 +105,8 @@ examples:
#size-cells = <0>;
magnetometer@2e {
- compatible = "yamaha,yas539";
- reg = <0x2e>;
- vdd-supply = <&ldo1_reg>;
+ compatible = "yamaha,yas539";
+ reg = <0x2e>;
+ vdd-supply = <&ldo1_reg>;
};
};
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 256f537840e4..63885af6a74b 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -61,15 +61,15 @@ examples:
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
- #address-cells = <1>;
- #size-cells = <0>;
- pressure@77 {
- compatible = "bosch,bmp085";
- reg = <0x77>;
- interrupt-parent = <&gpio0>;
- interrupts = <25 IRQ_TYPE_EDGE_RISING>;
- reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
- vddd-supply = <&foo>;
- vdda-supply = <&bar>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pressure@77 {
+ compatible = "bosch,bmp085";
+ reg = <0x77>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ vddd-supply = <&foo>;
+ vdda-supply = <&bar>;
+ };
};
diff --git a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
index 710d3b9a86d9..c999994e19e3 100644
--- a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
@@ -60,7 +60,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- lightning@0 {
+ lightning@0 {
compatible = "ams,as3935";
reg = <0>;
spi-max-frequency = <400000>;
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index 3e5b7b47bcdc..f44fc32ce87e 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -472,75 +472,74 @@ examples:
#size-cells = <0>;
temperature-sensor@0 {
- compatible = "adi,ltc2983";
- reg = <0>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupts = <20 IRQ_TYPE_EDGE_RISING>;
- interrupt-parent = <&gpio>;
-
- thermocouple@18 {
- reg = <18>;
- adi,sensor-type = <8>; //Type B
- adi,sensor-oc-current-microamp = <10>;
- adi,cold-junction-handle = <&diode5>;
- };
-
- diode5: diode@5 {
- reg = <5>;
- adi,sensor-type = <28>;
- };
-
- rsense2: rsense@2 {
- reg = <2>;
- adi,sensor-type = <29>;
- adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms
- };
-
- rtd@14 {
- reg = <14>;
- adi,sensor-type = <15>; //PT1000
- /*2-wire, internal gnd, no current rotation*/
- adi,number-of-wires = <2>;
- adi,rsense-share;
- adi,excitation-current-microamp = <500>;
- adi,rsense-handle = <&rsense2>;
- };
-
- adc@10 {
- reg = <10>;
- adi,sensor-type = <30>;
- adi,single-ended;
- };
-
- thermistor@12 {
- reg = <12>;
- adi,sensor-type = <26>; //Steinhart
- adi,rsense-handle = <&rsense2>;
- adi,custom-steinhart = <0x00f371ec 0x12345678
- 0x2c0f8733 0x10018c66 0xa0feaccd
- 0x90021d99>; //6 entries
- };
-
- thermocouple@20 {
- reg = <20>;
- adi,sensor-type = <9>; //custom thermocouple
- adi,single-ended;
- adi,custom-thermocouple =
- /bits/ 64 <(-50220000) 0>,
- /bits/ 64 <(-30200000) 99100000>,
- /bits/ 64 <(-5300000) 135400000>,
- /bits/ 64 <0 273150000>,
- /bits/ 64 <40200000 361200000>,
- /bits/ 64 <55300000 522100000>,
- /bits/ 64 <88300000 720300000>,
- /bits/ 64 <132200000 811200000>,
- /bits/ 64 <188700000 922500000>,
- /bits/ 64 <460400000 1000000000>; //10 pairs
- };
-
+ compatible = "adi,ltc2983";
+ reg = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gpio>;
+
+ thermocouple@18 {
+ reg = <18>;
+ adi,sensor-type = <8>; //Type B
+ adi,sensor-oc-current-microamp = <10>;
+ adi,cold-junction-handle = <&diode5>;
+ };
+
+ diode5: diode@5 {
+ reg = <5>;
+ adi,sensor-type = <28>;
+ };
+
+ rsense2: rsense@2 {
+ reg = <2>;
+ adi,sensor-type = <29>;
+ adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms
+ };
+
+ rtd@14 {
+ reg = <14>;
+ adi,sensor-type = <15>; //PT1000
+ /*2-wire, internal gnd, no current rotation*/
+ adi,number-of-wires = <2>;
+ adi,rsense-share;
+ adi,excitation-current-microamp = <500>;
+ adi,rsense-handle = <&rsense2>;
+ };
+
+ adc@10 {
+ reg = <10>;
+ adi,sensor-type = <30>;
+ adi,single-ended;
+ };
+
+ thermistor@12 {
+ reg = <12>;
+ adi,sensor-type = <26>; //Steinhart
+ adi,rsense-handle = <&rsense2>;
+ adi,custom-steinhart = <0x00f371ec 0x12345678
+ 0x2c0f8733 0x10018c66 0xa0feaccd
+ 0x90021d99>; //6 entries
+ };
+
+ thermocouple@20 {
+ reg = <20>;
+ adi,sensor-type = <9>; //custom thermocouple
+ adi,single-ended;
+ adi,custom-thermocouple =
+ /bits/ 64 <(-50220000) 0>,
+ /bits/ 64 <(-30200000) 99100000>,
+ /bits/ 64 <(-5300000) 135400000>,
+ /bits/ 64 <0 273150000>,
+ /bits/ 64 <40200000 361200000>,
+ /bits/ 64 <55300000 522100000>,
+ /bits/ 64 <88300000 720300000>,
+ /bits/ 64 <132200000 811200000>,
+ /bits/ 64 <188700000 922500000>,
+ /bits/ 64 <460400000 1000000000>; //10 pairs
+ };
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
index 66394e17fcc8..7cc365e0ebc8 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
@@ -44,11 +44,11 @@ examples:
#size-cells = <0>;
temperature-sensor@0 {
- compatible = "maxim,max31865";
- reg = <0>;
- spi-max-frequency = <400000>;
- spi-cpha;
- maxim,3-wire;
+ compatible = "maxim,max31865";
+ reg = <0>;
+ spi-max-frequency = <400000>;
+ spi-cpha;
+ maxim,3-wire;
};
};
...
--
2.34.1
next prev parent reply other threads:[~2023-01-24 8:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-24 8:10 [PATCH v2 1/5] dt-bindings: iio: drop unneeded quotes Krzysztof Kozlowski
2023-01-24 8:10 ` [PATCH v2 2/5] dt-bindings: iio: minor whitespace cleanups Krzysztof Kozlowski
2023-01-24 8:10 ` [PATCH v2 3/5] dt-bindings: iio: correct node names in examples Krzysztof Kozlowski
2023-01-24 8:10 ` [PATCH v2 4/5] dt-bindings: iio: use lowercase hex " Krzysztof Kozlowski
2023-01-24 8:10 ` Krzysztof Kozlowski [this message]
2023-01-28 16:16 ` [PATCH v2 1/5] dt-bindings: iio: drop unneeded quotes Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230124081037.31013-5-krzysztof.kozlowski@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=Michael.Hennerich@analog.com \
--cc=ak@it-klinger.de \
--cc=alazar@startmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandre.torgue@foss.st.com \
--cc=alexandru.tachici@analog.com \
--cc=alim.akhtar@samsung.com \
--cc=bleung@chromium.org \
--cc=caleb.connolly@linaro.org \
--cc=chrome-platform@lists.linux.dev \
--cc=claudiu.beznea@microchip.com \
--cc=contact@artur-rojek.eu \
--cc=daniel.baluta@nxp.com \
--cc=ddrokosov@sberdevices.ru \
--cc=decatf@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dragos.bogdan@analog.com \
--cc=eugen.hristev@microchip.com \
--cc=ez@norophonic.com \
--cc=fabrice.gasnier@foss.st.com \
--cc=groeck@chromium.org \
--cc=harald@ccbib.org \
--cc=jic23@kernel.org \
--cc=jmaneyrol@invensense.com \
--cc=kent@minoris.se \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@rempel-privat.de \
--cc=lorenzo@kernel.org \
--cc=lucas.p.stankus@gmail.com \
--cc=marcelo.schmitt1@gmail.com \
--cc=marcus.folkesson@gmail.com \
--cc=matt.ranostay@konsulko.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=navin@linumiz.com \
--cc=nicolas.ferre@microchip.com \
--cc=nish.malpani25@gmail.com \
--cc=nuno.sa@analog.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=preid@electromag.com.au \
--cc=puranjay12@gmail.com \
--cc=renatogeh@gmail.com \
--cc=rmfrfs@gmail.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sean@geanix.com \
--cc=stefan.popa@analog.com \
--cc=stefan@agner.ch \
--cc=swboyd@chromium.org \
--cc=tremyfr@yahoo.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.