All of lore.kernel.org
 help / color / mirror / Atom feed
From: Markus Schneider-Pargmann <msp@baylibre.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>,
	Chandrasekar Ramakrishnan <rcsekar@samsung.com>,
	Wolfgang Grandegger <wg@grandegger.com>
Cc: Vincent MAILHOL <mailhol.vincent@wanadoo.fr>,
	linux-can@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Markus Schneider-Pargmann <msp@baylibre.com>
Subject: [PATCH v2 11/18] can: m_can: Add rx coalescing ethtool support
Date: Wed, 25 Jan 2023 20:50:52 +0100	[thread overview]
Message-ID: <20230125195059.630377-12-msp@baylibre.com> (raw)
In-Reply-To: <20230125195059.630377-1-msp@baylibre.com>

Add the possibility to set coalescing parameters with ethtool.

rx-frames-irq and rx-usecs-irq can only be set and unset together as the
implemented mechanism would not work otherwise. rx-frames-irq can't be
greater than the RX FIFO size.

Also all values can only be changed if the chip is not active.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 drivers/net/can/m_can/m_can.c | 46 +++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 31a5e551ebd9..35c38c230a00 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1935,8 +1935,54 @@ static const struct net_device_ops m_can_netdev_ops = {
 	.ndo_change_mtu = can_change_mtu,
 };
 
+static int m_can_get_coalesce(struct net_device *dev,
+			      struct ethtool_coalesce *ec,
+			      struct kernel_ethtool_coalesce *kec,
+			      struct netlink_ext_ack *ext_ack)
+{
+	struct m_can_classdev *cdev = netdev_priv(dev);
+
+	ec->rx_max_coalesced_frames_irq = cdev->rx_max_coalesced_frames_irq;
+	ec->rx_coalesce_usecs_irq = cdev->rx_coalesce_usecs_irq;
+
+	return 0;
+}
+
+static int m_can_set_coalesce(struct net_device *dev,
+			      struct ethtool_coalesce *ec,
+			      struct kernel_ethtool_coalesce *kec,
+			      struct netlink_ext_ack *ext_ack)
+{
+	struct m_can_classdev *cdev = netdev_priv(dev);
+
+	if (cdev->can.state != CAN_STATE_STOPPED) {
+		netdev_err(dev, "Device is in use, please shut it down first\n");
+		return -EBUSY;
+	}
+
+	if (ec->rx_max_coalesced_frames_irq > cdev->mcfg[MRAM_RXF0].num) {
+		netdev_err(dev, "rx-frames-irq (%u) greater than the RX FIFO (%u)\n",
+			   ec->rx_max_coalesced_frames_irq,
+			   cdev->mcfg[MRAM_RXF0].num);
+		return -EINVAL;
+	}
+	if ((ec->rx_max_coalesced_frames_irq == 0) != (ec->rx_coalesce_usecs_irq == 0)) {
+		netdev_err(dev, "rx-frames-irq and rx-usecs-irq can only be set together\n");
+		return -EINVAL;
+	}
+
+	cdev->rx_max_coalesced_frames_irq = ec->rx_max_coalesced_frames_irq;
+	cdev->rx_coalesce_usecs_irq = ec->rx_coalesce_usecs_irq;
+
+	return 0;
+}
+
 static const struct ethtool_ops m_can_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS_IRQ |
+		ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ,
 	.get_ts_info = ethtool_op_get_ts_info,
+	.get_coalesce = m_can_get_coalesce,
+	.set_coalesce = m_can_set_coalesce,
 };
 
 static int register_m_can_dev(struct net_device *dev)
-- 
2.39.0


  parent reply	other threads:[~2023-01-25 19:52 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-25 19:50 [PATCH v2 00/18] can: m_can: Optimizations for m_can/tcan part 2 Markus Schneider-Pargmann
2023-01-25 19:50 ` [PATCH v2 01/18] can: tcan4x5x: Remove reserved register 0x814 from writable table Markus Schneider-Pargmann
2023-01-25 19:50 ` [PATCH v2 02/18] can: tcan4x5x: Check size of mram configuration Markus Schneider-Pargmann
2023-01-25 19:50 ` [PATCH v2 03/18] can: m_can: Remove repeated check for is_peripheral Markus Schneider-Pargmann
2023-01-25 19:50 ` [PATCH v2 04/18] can: m_can: Always acknowledge all interrupts Markus Schneider-Pargmann
2023-01-25 19:50 ` [PATCH v2 05/18] can: m_can: Remove double interrupt enable Markus Schneider-Pargmann
2023-01-25 19:50 ` [PATCH v2 06/18] can: m_can: Disable unused interrupts Markus Schneider-Pargmann
2023-01-26  8:07   ` Simon Horman
2023-01-25 19:50 ` [PATCH v2 07/18] can: m_can: Keep interrupts enabled during peripheral read Markus Schneider-Pargmann
2023-01-25 19:50 ` [PATCH v2 08/18] can: m_can: Write transmit header and data in one transaction Markus Schneider-Pargmann
2023-01-26  8:04   ` Simon Horman
2023-01-30  8:04     ` Markus Schneider-Pargmann
2023-02-04 13:05       ` Simon Horman
2023-02-20  5:31         ` Markus Schneider-Pargmann
2023-01-25 19:50 ` [PATCH v2 09/18] can: m_can: Implement receive coalescing Markus Schneider-Pargmann
2023-01-25 19:50 ` [PATCH v2 10/18] can: m_can: Implement transmit coalescing Markus Schneider-Pargmann
2023-01-25 19:50 ` Markus Schneider-Pargmann [this message]
2023-01-25 19:50 ` [PATCH v2 12/18] can: m_can: Add tx coalescing ethtool support Markus Schneider-Pargmann
2023-01-25 19:50 ` [PATCH v2 13/18] can: m_can: Cache tx putidx Markus Schneider-Pargmann
2023-01-25 19:50 ` [PATCH v2 14/18] can: m_can: Use the workqueue as queue Markus Schneider-Pargmann
2023-01-25 19:50 ` [PATCH v2 15/18] can: m_can: Introduce a tx_fifo_in_flight counter Markus Schneider-Pargmann
2023-01-25 19:50 ` [PATCH v2 16/18] can: m_can: Use tx_fifo_in_flight for netif_queue control Markus Schneider-Pargmann
2023-01-25 19:50 ` [PATCH v2 17/18] can: m_can: Implement BQL Markus Schneider-Pargmann
2023-01-25 19:50 ` [PATCH v2 18/18] can: m_can: Implement transmit submission coalescing Markus Schneider-Pargmann
2023-01-28 15:00   ` Vincent MAILHOL
2023-01-30  8:05     ` Markus Schneider-Pargmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230125195059.630377-12-msp@baylibre.com \
    --to=msp@baylibre.com \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mailhol.vincent@wanadoo.fr \
    --cc=mkl@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    --cc=rcsekar@samsung.com \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.