From: Arnd Bergmann <arnd@kernel.org>
To: Wei Fang <wei.fang@nxp.com>, Jakub Kicinski <kuba@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
Shenwei Wang <shenwei.wang@nxp.com>,
Clark Wang <xiaoning.wang@nxp.com>,
NXP Linux Team <linux-imx@nxp.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>, Andrew Lunn <andrew@lunn.ch>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] [v2] fec: convert to gpio descriptor
Date: Thu, 26 Jan 2023 22:05:59 +0100 [thread overview]
Message-ID: <20230126210648.1668178-1-arnd@kernel.org> (raw)
From: Arnd Bergmann <arnd@arndb.de>
The driver can be trivially converted, as it only triggers the gpio
pin briefly to do a reset, and it already only supports DT.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v2 changes, suggested by Andrew Lunn:
- reorder header inclusions,
- use dev_err_probe()
---
drivers/net/ethernet/freescale/fec_main.c | 25 ++++++++---------------
1 file changed, 9 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 5ff45b1a74a5..2716898e0b9b 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -56,12 +56,12 @@
#include <linux/fec.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include <linux/regulator/consumer.h>
#include <linux/if_vlan.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/gpio/consumer.h>
#include <linux/prefetch.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
@@ -4035,10 +4035,11 @@ static int fec_enet_init(struct net_device *ndev)
#ifdef CONFIG_OF
static int fec_reset_phy(struct platform_device *pdev)
{
- int err, phy_reset;
+ struct gpio_desc *phy_reset;
bool active_high = false;
int msec = 1, phy_post_delay = 0;
struct device_node *np = pdev->dev.of_node;
+ int err;
if (!np)
return 0;
@@ -4048,12 +4049,6 @@ static int fec_reset_phy(struct platform_device *pdev)
if (!err && msec > 1000)
msec = 1;
- phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
- if (phy_reset == -EPROBE_DEFER)
- return phy_reset;
- else if (!gpio_is_valid(phy_reset))
- return 0;
-
err = of_property_read_u32(np, "phy-reset-post-delay", &phy_post_delay);
/* valid reset duration should be less than 1s */
if (!err && phy_post_delay > 1000)
@@ -4061,20 +4056,18 @@ static int fec_reset_phy(struct platform_device *pdev)
active_high = of_property_read_bool(np, "phy-reset-active-high");
- err = devm_gpio_request_one(&pdev->dev, phy_reset,
- active_high ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
- "phy-reset");
- if (err) {
- dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
- return err;
- }
+ phy_reset = devm_gpiod_get(&pdev->dev, "phy-reset",
+ active_high ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW);
+ if (IS_ERR(phy_reset))
+ return dev_err_probe(&pdev->dev, PTR_ERR(phy_reset),
+ "failed to get phy-reset-gpios\n");
if (msec > 20)
msleep(msec);
else
usleep_range(msec * 1000, msec * 1000 + 1000);
- gpio_set_value_cansleep(phy_reset, !active_high);
+ gpiod_set_value_cansleep(phy_reset, !active_high);
if (!phy_post_delay)
return 0;
--
2.39.0
next reply other threads:[~2023-01-26 21:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-26 21:05 Arnd Bergmann [this message]
2023-01-26 22:10 ` [PATCH] [v2] fec: convert to gpio descriptor Andrew Lunn
2023-01-30 7:30 ` patchwork-bot+netdevbpf
2023-01-31 15:38 ` Marc Kleine-Budde
2023-01-31 17:25 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230126210648.1668178-1-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=shenwei.wang@nxp.com \
--cc=wei.fang@nxp.com \
--cc=xiaoning.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.